(*
* Copyright (C) 2001-2003 Michael Niedermayer <michaelni@gmx.at>
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*)
(*
* FFmpeg Pascal port
* - Ported by the UltraStar Deluxe Team
*)
(*
* Conversion of libswscale/swscale.h
* revision 27592, Fri Sep 12 21:46:53 2008 UTC
*)
unit swscale;
{$IFDEF FPC}
{$MODE DELPHI }
{$PACKENUM 4} (* use 4-byte enums *)
{$PACKRECORDS C} (* C/C++-compatible record packing *)
{$ELSE}
{$MINENUMSIZE 4} (* use 4-byte enums *)
{$ENDIF}
{$IFDEF DARWIN}
{$linklib libswscale}
{$ENDIF}
interface
uses
ctypes,
avutil,
UConfig;
const
(* Max. supported version by this header *)
LIBSWSCALE_MAX_VERSION_MAJOR = 0;
LIBSWSCALE_MAX_VERSION_MINOR = 7;
LIBSWSCALE_MAX_VERSION_RELEASE = 1;
LIBSWSCALE_MAX_VERSION = (LIBSWSCALE_MAX_VERSION_MAJOR * VERSION_MAJOR) +
(LIBSWSCALE_MAX_VERSION_MINOR * VERSION_MINOR) +
(LIBSWSCALE_MAX_VERSION_RELEASE * VERSION_RELEASE);
(* Check if linked versions are supported *)
{$IF (LIBSWSCALE_VERSION > LIBSWSCALE_MAX_VERSION)}
{$MESSAGE Error 'Linked version of libswscale is not yet supported!'}
{$IFEND}
type
TQuadCintArray = array[0..3] of cint;
PQuadCintArray = ^TQuadCintArray;
TCintArray = array[0..0] of cint;
PCintArray = ^TCintArray;
TPCuint8Array = array[0..0] of PCuint8;
PPCuint8Array = ^TPCuint8Array;
{$IF LIBSWSCALE_VERSION >= 000006001} // 0.6.1
(**
* Returns the LIBSWSCALE_VERSION_INT constant.
*)
function swscale_version(): cuint;
cdecl; external sw__scale;
{$IFEND}
const
{* values for the flags, the stuff on the command line is different *}
SWS_FAST_BILINEAR = 1;
SWS_BILINEAR = 2;
SWS_BICUBIC = 4;
SWS_X = 8;
SWS_POINT = $10;
SWS_AREA = $20;
SWS_BICUBLIN = $40;
SWS_GAUSS = $80;
SWS_SINC = $100;
SWS_LANCZOS = $200;
SWS_SPLINE = $400;
SWS_SRC_V_CHR_DROP_MASK = $30000;
SWS_SRC_V_CHR_DROP_SHIFT = 16;
SWS_PARAM_DEFAULT = 123456;
SWS_PRINT_INFO = $1000;
//the following 3 flags are not completely implemented
//internal chrominace subsampling info
SWS_FULL_CHR_H_INT = $2000;
//input subsampling info
SWS_FULL_CHR_H_INP = $4000;
SWS_DIRECT_BGR = $8000;
SWS_ACCURATE_RND = $40000;
SWS_BITEXACT = $80000;
SWS_CPU_CAPS_MMX = $80000000;
SWS_CPU_CAPS_MMX2 = $20000000;
SWS_CPU_CAPS_3DNOW = $40000000;
SWS_CPU_CAPS_ALTIVEC = $10000000;
SWS_CPU_CAPS_BFIN = $01000000;
SWS_MAX_REDUCE_CUTOFF = 0.002;
SWS_CS_ITU709 = 1;
SWS_CS_FCC = 4;
SWS_CS_ITU601 = 5;
SWS_CS_ITU624 = 5;
SWS_CS_SMPTE170M = 5;
SWS_CS_SMPTE240M = 7;
SWS_CS_DEFAULT = 5;
type
// when used for filters they must have an odd number of elements
// coeffs cannot be shared between vectors
PSwsVector = ^TSwsVector;
TSwsVector = record
coeff: PCdouble; // pointer to the list of coefficients
length: cint; // number of coefficients in the vector
end;
// vectors can be shared
PSwsFilter = ^TSwsFilter;
TSwsFilter = record
lumH: PSwsVector;
lumV: PSwsVector;
chrH: PSwsVector;
chrV: PSwsVector;
end;
PSwsContext = ^TSwsContext;
TSwsContext = record
{internal structure}
end;
{
Scales the image slice in \p srcSlice and puts the resulting scaled
slice in the image in \p dst. A slice is a sequence of consecutive
rows in an image.
@param context the scaling context previously created with
sws_getContext()
@param srcSlice the array containing the pointers to the planes of
the source slice
@param srcStride the array containing the strides for each plane of
the source image
@param srcSliceY the position in the source image of the slice to
process, that is the number (counted starting from
zero) in the image of the first row of the slice
@param srcSliceH the height of the source slice, that is the number
of rows in the slice
@param dst the array containing the pointers to the planes of
the destination image
@param dstStride the array containing the strides for each plane of
the destination image
@return the height of the output slice
}
procedure sws_freeContext(swsContext: PSwsContext);
cdecl; external sw__scale;
{
Allocates and returns a SwsContext. You need it to perform
scaling/conversion operations using sws_scale().
param srcW the width of the source image
param srcH the height of the source image
param srcFormat the source image format
param dstW the width of the destination image
param dstH the height of the destination image
param dstFormat the destination image format
param flags specify which algorithm and options to use for rescaling
return a pointer to an allocated context, or NULL in case of error
}
function sws_getContext(srcW: cint; srcH: cint; srcFormat: TAVPixelFormat;
dstW: cint; dstH: cint; dstFormat: TAVPixelFormat;
flags: cint; srcFilter: PSwsFilter;
dstFilter: PSwsFilter; param: PCdouble): PSwsContext;
cdecl; external sw__scale;
function sws_scale(context: PSwsContext; srcSlice: PPCuint8Array; srcStride: PCintArray;
srcSliceY: cint; srcSliceH: cint; dst: PPCuint8Array; dstStride: PCintArray): cint;
cdecl; external sw__scale;
{$IF LIBSWSCALE_VERSION_MAJOR < 1}
// deprecated. Use sws_scale() instead.
function sws_scale_ordered(context: PSwsContext; src: PPCuint8Array; srcStride: PCintArray;
srcSliceY: cint; srcSliceH: cint; dst: PPCuint8Array; dstStride: PCintArray): cint;
cdecl; external sw__scale; deprecated;
{$IFEND}
// param inv_table the yuv2rgb coefficients, normally ff_yuv2rgb_coeffs[x]
// param fullRange if 1 then the luma range is 0..255 if 0 it is 16..235
// return -1 if not supported
function sws_setColorspaceDetails(c: PSwsContext; inv_table: PQuadCintArray;
srcRange: cint; table: PQuadCintArray; dstRange: cint;
brightness: cint; contrast: cint; saturation: cint): cint;
cdecl; external sw__scale;
// return -1 if not supported
function sws_getColorspaceDetails(c: PSwsContext; var inv_table: PQuadCintArray;
var srcRange: cint; var table: PQuadCintArray; var dstRange: cint;
var brightness: cint; var contrast: cint; var saturation: cint): cint;
cdecl; external sw__scale;
// Returns a normalized Gaussian curve used to filter stuff
// quality=3 is high quality, lower is lower quality.
function sws_getGaussianVec(variance: cdouble; quality: cdouble): PSwsVector;
cdecl; external sw__scale;
// Allocates and returns a vector with \p length coefficients, all
// with the same value \p c.
function sws_getConstVec(c: cdouble; length: cint): PSwsVector;
cdecl; external sw__scale;
// Allocates and returns a vector with just one coefficient, with
// value 1.0.
function sws_getIdentityVec: PSwsVector;
cdecl; external sw__scale;
// Scales all the coefficients of \p a by the \p scalar value.
procedure sws_scaleVec(a: PSwsVector; scalar: cdouble);
cdecl; external sw__scale;
// Scales all the coefficients of \p a so that their sum equals \p
// height."
procedure sws_normalizeVec(a: PSwsVector; height: cdouble);
cdecl; external sw__scale;
procedure sws_convVec(a: PSwsVector; b: PSwsVector);
cdecl; external sw__scale;
procedure sws_addVec(a: PSwsVector; b: PSwsVector);
cdecl; external sw__scale;
procedure sws_subVec(a: PSwsVector; b: PSwsVector);
cdecl; external sw__scale;
procedure sws_shiftVec(a: PSwsVector; shift: cint);
cdecl; external sw__scale;
// Allocates and returns a clone of the vector \p a, that is a vector
// with the same coefficients as \p a.
function sws_cloneVec(a: PSwsVector): PSwsVector;
cdecl; external sw__scale;
{$IF LIBSWSCALE_VERSION_MAJOR < 1}
// deprecated Use sws_printVec2() instead.
procedure sws_printVec(a: PSwsVector);
cdecl; external sw__scale; deprecated;
{$IFEND}
{$IF LIBSWSCALE_VERSION_MINOR >= 7}
// Prints with av_log() a textual representation of the vector \p a
// if \p log_level <= av_log_level.
procedure sws_printVec2(a: PSwsVector,
log_ctx: PAVClass, log_level: cint); // Hint: PAVClass needs to be done in avutil as in log.h
cdecl; external sw__scale;
{$IFEND}
procedure sws_freeVec(a: PSwsVector);
cdecl; external sw__scale;
function sws_getDefaultFilter(lumaGBlur: cfloat; chromaGBlur: cfloat; lumaSharpen: cfloat; chromaSharpen: cfloat; chromaHShift: cfloat;
chromaVShift: cfloat; verbose: cint): PSwsFilter;
cdecl; external sw__scale;
procedure sws_freeFilter(filter: PSwsFilter);
cdecl; external sw__scale;
{
Checks if \p context can be reused, otherwise reallocates a new
one.
If \p context is NULL, just calls sws_getContext() to get a new
context. Otherwise, checks if the parameters are the ones already
saved in \p context. If that is the case, returns the current
context. Otherwise, frees \p context and gets a new context with
the new parameters.
Be warned that \p srcFilter and \p dstFilter are not checked, they
are assumed to remain the same.
}
function sws_getCachedContext(context: PSwsContext;
srcW: cint; srcH: cint; srcFormat: TAVPixelFormat;
dstW: cint; dstH: cint; dstFormat: TAVPixelFormat;
flags: cint; srcFilter: PSwsFilter;
dstFilter: PSwsFilter; param: PCdouble): PSwsContext;
cdecl; external sw__scale;
implementation
end.