(*
* copyright (c) 2001 Fabrice Bellard
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
* This is a part of Pascal porting of ffmpeg.
* - Originally by Victor Zinetz for Delphi and Free Pascal on Windows.
* - For Mac OS X, some modifications were made by The Creative CAT, denoted as CAT
* in the source codes.
* - Changes and updates by the UltraStar Deluxe Team
*
* Conversion of version 2.0 libavformat/avformat.h
* Version: 55.12.100
*)
unit avformat;
{$IFDEF FPC}
{$MODE DELPHI }
{$PACKENUM 4} (* use 4-byte enums *)
{$PACKRECORDS C} (* C/C++-compatible record packing *)
{$ELSE}
{$MINENUMSIZE 4} (* use 4-byte enums *)
{$ENDIF}
{$I switches.inc} (* for the HasInline define *)
{$IFDEF DARWIN}
{$linklib libavformat}
{$ENDIF}
interface
uses
ctypes,
avcodec,
avio,
avutil,
rational,
SysUtils,
UConfig;
const
(*
* IMPORTANT: This headers are valid for all minor revisions of ffmpeg
* version 1.1.x
*)
(* Max. supported version by this header *)
LIBAVFORMAT_MAX_VERSION_MAJOR = 55;
LIBAVFORMAT_MAX_VERSION_MINOR = 33;
LIBAVFORMAT_MAX_VERSION_RELEASE = 100;
LIBAVFORMAT_MAX_VERSION = (LIBAVFORMAT_MAX_VERSION_MAJOR * VERSION_MAJOR) +
(LIBAVFORMAT_MAX_VERSION_MINOR * VERSION_MINOR) +
(LIBAVFORMAT_MAX_VERSION_RELEASE * VERSION_RELEASE);
(* Min. supported version by this header *)
LIBAVFORMAT_MIN_VERSION_MAJOR = 55;
LIBAVFORMAT_MIN_VERSION_MINOR = 33;
LIBAVFORMAT_MIN_VERSION_RELEASE = 100;
LIBAVFORMAT_MIN_VERSION = (LIBAVFORMAT_MIN_VERSION_MAJOR * VERSION_MAJOR) +
(LIBAVFORMAT_MIN_VERSION_MINOR * VERSION_MINOR) +
(LIBAVFORMAT_MIN_VERSION_RELEASE * VERSION_RELEASE);
(* Check if linked versions are supported *)
{$IF (LIBAVFORMAT_VERSION < LIBAVFORMAT_MIN_VERSION)}
{$MESSAGE Error 'Linked version of libavformat is too old!'}
{$IFEND}
(* Check if linked versions are supported *)
{$IF (LIBAVFORMAT_VERSION > LIBAVFORMAT_MAX_VERSION)}
{$MESSAGE Error 'Linked version of libavformat is not yet supported!'}
{$IFEND}
{
const
LIBAVFORMAT_BUILD = LIBAVFORMAT_VERSION_INT;
LIBAVFORMAT_IDENT = 'Lavf' AV_STRINGIFY(LIBAVFORMAT_VERSION);
}
(**
* FF_API_* defines may be placed below to indicate public API that will be
* dropped at a future version bump. The defines themselves are not part of
* the public API and may change, break or disappear at any time.
*)
(*old defines not present anymore in ffmpeg-2.1
{$ifndef FF_API_OLD_AVIO}
{$define FF_API_OLD_AVIO := (LIBAVFORMAT_VERSION_MAJOR < 55)}
{$endif}
{$ifndef FF_API_PKT_DUMP}
{$define FF_API_PKT_DUMP := (LIBAVFORMAT_VERSION_MAJOR < 54)
{$endif}
*)
{$ifndef FF_API_ALLOC_OUTPUT_CONTEXT}
{$define FF_API_ALLOC_OUTPUT_CONTEXT := (LIBAVFORMAT_VERSION_MAJOR < 56)}
{$endif}
{$ifndef FF_API_FORMAT_PARAMETERS}
{$define FF_API_FORMAT_PARAMETERS := (LIBAVFORMAT_VERSION_MAJOR < 56)}
{$endif}
{$ifndef FF_API_NEW_STREAM}
{$define FF_API_NEW_STREAM := (LIBAVFORMAT_VERSION_MAJOR < 56)}
{$endif}
{$ifndef FF_API_SET_PTS_INFO}
{$define FF_API_SET_PTS_INFO := (LIBAVFORMAT_VERSION_MAJOR < 56)}
{$endif}
{$ifndef FF_API_CLOSE_INPUT_FILE}
{$define FF_API_CLOSE_INPUT_FILE := (LIBAVFORMAT_VERSION_MAJOR < 56)}
{$endif}
{$ifndef FF_API_READ_PACKET}
{$define FF_API_READ_PACKET := (LIBAVFORMAT_VERSION_MAJOR < 56)}
{$endif}
{$ifndef FF_API_ASS_SSA}
{$define FF_API_ASS_SSA := (LIBAVFORMAT_VERSION_MAJOR < 56)}
{$endif}
{$ifndef FF_API_R_FRAME_RATE}
{$define FF_API_R_FRAME_RATE := 1}
{$endif}
(**
* @defgroup libavf I/O and Muxing/Demuxing Library
* @{
*
* Libavformat (lavf) is a library for dealing with various media container
* formats. Its main two purposes are demuxing - i.e. splitting a media file
* into component streams, and the reverse process of muxing - writing supplied
* data in a specified container format. It also has an @ref lavf_io
* "I/O module" which supports a number of protocols for accessing the data (e.g.
* file, tcp, http and others). Before using lavf, you need to call
* av_register_all() to register all compiled muxers, demuxers and protocols.
* Unless you are absolutely sure you won't use libavformat's network
* capabilities, you should also call avformat_network_init().
*
* A supported input format is described by an AVInputFormat struct, conversely
* an output format is described by AVOutputFormat. You can iterate over all
* registered input/output formats using the av_iformat_next() /
* av_oformat_next() functions. The protocols layer is not part of the public
* API, so you can only get the names of supported protocols with the
* avio_enum_protocols() function.
*
* Main lavf structure used for both muxing and demuxing is AVFormatContext,
* which exports all information about the file being read or written. As with
* most Libavformat structures, its size is not part of public ABI, so it cannot be
* allocated on stack or directly with av_malloc(). To create an
* AVFormatContext, use avformat_alloc_context() (some functions, like
* avformat_open_input() might do that for you).
*
* Most importantly an AVFormatContext contains:
* @li the @ref AVFormatContext.iformat "input" or @ref AVFormatContext.oformat
* "output" format. It is either autodetected or set by user for input;
* always set by user for output.
* @li an @ref AVFormatContext.streams "array" of AVStreams, which describe all
* elementary streams stored in the file. AVStreams are typically referred to
* using their index in this array.
* @li an @ref AVFormatContext.pb "I/O context". It is either opened by lavf or
* set by user for input, always set by user for output (unless you are dealing
* with an AVFMT_NOFILE format).
*
* @section lavf_options Passing options to (de)muxers
* Lavf allows to configure muxers and demuxers using the @ref avoptions
* mechanism. Generic (format-independent) libavformat options are provided by
* AVFormatContext, they can be examined from a user program by calling
* av_opt_next() / av_opt_find() on an allocated AVFormatContext (or its AVClass
* from avformat_get_class()). Private (format-specific) options are provided by
* AVFormatContext.priv_data if and only if AVInputFormat.priv_class /
* AVOutputFormat.priv_class of the corresponding format struct is non-NULL.
* Further options may be provided by the @ref AVFormatContext.pb "I/O context",
* if its AVClass is non-NULL, and the protocols layer. See the discussion on
* nesting in @ref avoptions documentation to learn how to access those.
*
* @defgroup lavf_decoding Demuxing
* @{
* Demuxers read a media file and split it into chunks of data (@em packets). A
* @ref AVPacket "packet" contains one or more encoded frames which belongs to a
* single elementary stream. In the lavf API this process is represented by the
* avformat_open_input() function for opening a file, av_read_frame() for
* reading a single packet and finally avformat_close_input(), which does the
* cleanup.
*
* @section lavf_decoding_open Opening a media file
* The minimum information required to open a file is its URL or filename, which
* is passed to avformat_open_input(), as in the following code:
* @code
* const char *url = "in.mp3";
* AVFormatContext *s = NULL;
* int ret = avformat_open_input(&s, url, NULL, NULL);
* if (ret < 0)
* abort();
* @endcode
* The above code attempts to allocate an AVFormatContext, open the
* specified file (autodetecting the format) and read the header, exporting the
* information stored there into s. Some formats do not have a header or do not
* store enough information there, so it is recommended that you call the
* avformat_find_stream_info() function which tries to read and decode a few
* frames to find missing information.
*
* In some cases you might want to preallocate an AVFormatContext yourself with
* avformat_alloc_context() and do some tweaking on it before passing it to
* avformat_open_input(). One such case is when you want to use custom functions
* for reading input data instead of lavf internal I/O layer.
* To do that, create your own AVIOContext with avio_alloc_context(), passing
* your reading callbacks to it. Then set the @em pb field of your
* AVFormatContext to newly created AVIOContext.
*
* Since the format of the opened file is in general not known until after
* avformat_open_input() has returned, it is not possible to set demuxer private
* options on a preallocated context. Instead, the options should be passed to
* avformat_open_input() wrapped in an AVDictionary:
* @code
* AVDictionary *options = NULL;
* av_dict_set(&options, "video_size", "640x480", 0);
* av_dict_set(&options, "pixel_format", "rgb24", 0);
*
* if (avformat_open_input(&s, url, NULL, &options) < 0)
* abort();
* av_dict_free(&options);
* @endcode
* This code passes the private options 'video_size' and 'pixel_format' to the
* demuxer. They would be necessary for e.g. the rawvideo demuxer, since it
* cannot know how to interpret raw video data otherwise. If the format turns
* out to be something different than raw video, those options will not be
* recognized by the demuxer and therefore will not be applied. Such unrecognized
* options are then returned in the options dictionary (recognized options are
* consumed). The calling program can handle such unrecognized options as it
* wishes, e.g.
* @code
* AVDictionaryEntry *e;
* if (e = av_dict_get(options, "", NULL, AV_DICT_IGNORE_SUFFIX)) {
* fprintf(stderr, "Option %s not recognized by the demuxer.\n", e->key);
* abort();
* }
* @endcode
*
* After you have finished reading the file, you must close it with
* avformat_close_input(). It will free everything associated with the file.
*
* @section lavf_decoding_read Reading from an opened file
* Reading data from an opened AVFormatContext is done by repeatedly calling
* av_read_frame() on it. Each call, if successful, will return an AVPacket
* containing encoded data for one AVStream, identified by
* AVPacket.stream_index. This packet may be passed straight into the libavcodec
* decoding functions avcodec_decode_video2(), avcodec_decode_audio4() or
* avcodec_decode_subtitle2() if the caller wishes to decode the data.
*
* AVPacket.pts, AVPacket.dts and AVPacket.duration timing information will be
* set if known. They may also be unset (i.e. AV_NOPTS_VALUE for
* pts/dts, 0 for duration) if the stream does not provide them. The timing
* information will be in AVStream.time_base units, i.e. it has to be
* multiplied by the timebase to convert them to seconds.
*
* If AVPacket.buf is set on the returned packet, then the packet is
* allocated dynamically and the user may keep it indefinitely.
* Otherwise, if AVPacket.buf is NULL, the packet data is backed by a
* static storage somewhere inside the demuxer and the packet is only valid
* until the next av_read_frame() call or closing the file. If the caller
* requires a longer lifetime, av_dup_packet() will make an av_malloc()ed copy
* of it.
* In both cases, the packet must be freed with av_free_packet() when it is no
* longer needed.
*
* @section lavf_decoding_seek Seeking
* @}
*
* @defgroup lavf_encoding Muxing
* @{
* Muxers take encoded data in the form of @ref AVPacket "AVPackets" and write
* it into files or other output bytestreams in the specified container format.
*
* The main API functions for muxing are avformat_write_header() for writing the
* file header, av_write_frame() / av_interleaved_write_frame() for writing the
* packets and av_write_trailer() for finalizing the file.
*
* At the beginning of the muxing process, the caller must first call
* avformat_alloc_context() to create a muxing context. The caller then sets up
* the muxer by filling the various fields in this context:
*
* - The @ref AVFormatContext.oformat "oformat" field must be set to select the
* muxer that will be used.
* - Unless the format is of the AVFMT_NOFILE type, the @ref AVFormatContext.pb
* "pb" field must be set to an opened IO context, either returned from
* avio_open2() or a custom one.
* - Unless the format is of the AVFMT_NOSTREAMS type, at least one stream must
* be created with the avformat_new_stream() function. The caller should fill
* the @ref AVStream.codec "stream codec context" information, such as the
* codec @ref AVCodecContext.codec_type "type", @ref AVCodecContext.codec_id
* "id" and other parameters (e.g. width / height, the pixel or sample format,
* etc.) as known. The @ref AVCodecContext.time_base "codec timebase" should
* be set to the timebase that the caller desires to use for this stream (note
* that the timebase actually used by the muxer can be different, as will be
* described later).
* - The caller may fill in additional information, such as @ref
* AVFormatContext.metadata "global" or @ref AVStream.metadata "per-stream"
* metadata, @ref AVFormatContext.chapters "chapters", @ref
* AVFormatContext.programs "programs", etc. as described in the
* AVFormatContext documentation. Whether such information will actually be
* stored in the output depends on what the container format and the muxer
* support.
*
* When the muxing context is fully set up, the caller must call
* avformat_write_header() to initialize the muxer internals and write the file
* header. Whether anything actually is written to the IO context at this step
* depends on the muxer, but this function must always be called. Any muxer
* private options must be passed in the options parameter to this function.
*
* The data is then sent to the muxer by repeatedly calling av_write_frame() or
* av_interleaved_write_frame() (consult those functions' documentation for
* discussion on the difference between them; only one of them may be used with
* a single muxing context, they should not be mixed). Do note that the timing
* information on the packets sent to the muxer must be in the corresponding
* AVStream's timebase. That timebase is set by the muxer (in the
* avformat_write_header() step) and may be different from the timebase the
* caller set on the codec context.
*
* Once all the data has been written, the caller must call av_write_trailer()
* to flush any buffered packets and finalize the output file, then close the IO
* context (if any) and finally free the muxing context with
* avformat_free_context().
* @}
*
* @defgroup lavf_io I/O Read/Write
* @{
* @}
*
* @defgroup lavf_codec Demuxers
* @{
* @defgroup lavf_codec_native Native Demuxers
* @{
* @}
* @defgroup lavf_codec_wrappers External library wrappers
* @{
* @}
* @}
* @defgroup lavf_protos I/O Protocols
* @{
* @}
* @defgroup lavf_internal Internal
* @{
* @}
* @}
*
*)
type
PAVFile = Pointer;
(*
* @defgroup metadata_api Public Metadata API
* @{
* @ingroup libavf
* The metadata API allows libavformat to export metadata tags to a client
* application when demuxing. Conversely it allows a client application to
* set metadata when muxing.
*
* Metadata is exported or set as pairs of key/value strings in the 'metadata'
* fields of the AVFormatContext, AVStream, AVChapter and AVProgram structs
* using the @ref lavu_dict "AVDictionary" API. Like all strings in FFmpeg,
* metadata is assumed to be UTF-8 encoded Unicode. Note that metadata
* exported by demuxers isn't checked to be valid UTF-8 in most cases.
*
* Important concepts to keep in mind:
* - Keys are unique; there can never be 2 tags with the same key. This is
* also meant semantically, i.e., a demuxer should not knowingly produce
* several keys that are literally different but semantically identical.
* E.g., key=Author5, key=Author6. In this example, all authors must be
* placed in the same tag.
* - Metadata is flat, not hierarchical; there are no subtags. If you
* want to store, e.g., the email address of the child of producer Alice
* and actor Bob, that could have key=alice_and_bobs_childs_email_address.
* - Several modifiers can be applied to the tag name. This is done by
* appending a dash character ('-') and the modifier name in the order
* they appear in the list below -- e.g. foo-eng-sort, not foo-sort-eng.
* - language -- a tag whose value is localized for a particular language
* is appended with the ISO 639-2/B 3-letter language code.
* For example: Author-ger=Michael, Author-eng=Mike
* The original/default language is in the unqualified "Author" tag.
* A demuxer should set a default if it sets any translated tag.
* - sorting -- a modified version of a tag that should be used for
* sorting will have '-sort' appended. E.g. artist="The Beatles",
* artist-sort="Beatles, The".
*
* - Demuxers attempt to export metadata in a generic format, however tags
* with no generic equivalents are left as they are stored in the container.
* Follows a list of generic tag names:
*
@verbatim
album -- name of the set this work belongs to
album_artist -- main creator of the set/album, if different from artist.
e.g. "Various Artists" for compilation albums.
artist -- main creator of the work
comment -- any additional description of the file.
composer -- who composed the work, if different from artist.
copyright -- name of copyright holder.
creation_time-- date when the file was created, preferably in ISO 8601.
date -- date when the work was created, preferably in ISO 8601.
disc -- number of a subset, e.g. disc in a multi-disc collection.
encoder -- name/settings of the software/hardware that produced the file.
encoded_by -- person/group who created the file.
filename -- original name of the file.
genre -- <self-evident>.
language -- main language in which the work is performed, preferably
in ISO 639-2 format. Multiple languages can be specified by
separating them with commas.
performer -- artist who performed the work, if different from artist.
E.g for "Also sprach Zarathustra", artist would be "Richard
Strauss" and performer "London Philharmonic Orchestra".
publisher -- name of the label/publisher.
service_name -- name of the service in broadcasting (channel name).
service_provider -- name of the service provider in broadcasting.
title -- name of the work.
track -- number of this work in the set, can be in form current/total.
variant_bitrate -- the total bitrate of the bitrate variant that the current stream is part of
@endverbatim
*
* Look in the examples section for an application example how to use the Metadata API.
*
* @}
*)
(* packet functions *)
(**
* Allocate and read the payload of a packet and initialize its fields with
* default values.
*
* @param s associated IO context
* @param pkt packet
* @param size desired payload size
* @return >0 (read size) if OK, AVERROR_xxx otherwise
*)
function av_get_packet(s: PAVIOContext; var pkt: TAVPacket; size: cint): cint;
cdecl; external av__format;
(**
* Read data and append it to the current content of the AVPacket.
* If pkt->size is 0 this is identical to av_get_packet.
* Note that this uses av_grow_packet and thus involves a realloc
* which is inefficient. Thus this function should only be used
* when there is no reasonable way to know (an upper bound of)
* the final size.
*
* @param s associated IO context
* @param pkt packet
* @param size amount of data to read
* @return >0 (read size) if OK, AVERROR_xxx otherwise, previous data
* will not be lost even if an error occurs.
*)
function av_append_packet(s: PAVIOContext; var pkt: TAVPacket; size: cint): cint;
cdecl; external av__format;
(*************************************************)
(* fractional numbers for exact pts handling *)
type
(**
* The exact value of the fractional number is: 'val + num / den'.
* num is assumed to be 0 <= num < den.
*)
PAVFrac = ^TAVFrac;
TAVFrac = record
val, num, den: cint64;
end;
(*************************************************)
(* input/output formats *)
type
(**
* This structure contains the data a format has to probe a file.
*)
TAVProbeData = record
filename: PAnsiChar;
buf: PByteArray; (**< Buffer must have AVPROBE_PADDING_SIZE of extra allocated bytes filled with zero. *)
buf_size: cint; (**< Size of buf except extra allocated bytes *)
end;
const
AVPROBE_SCORE_RETRY = (AVPROBE_SCORE_MAX DIV 4);
AVPROBE_SCORE_STREAM_RETRY = (AVPROBE_SCORE_MAX DIV 4-1);
AVPROBE_SCORE_EXTENSION = 50; ///< score for file extension
AVPROBE_SCORE_MAX = 100; ///< maximum score
AVPROBE_PADDING_SIZE = 32; ///< extra allocated bytes at the end of the probe buffer
/// Demuxer will use avio_open, no opened file should be provided by the caller.
AVFMT_NOFILE = $0001;
AVFMT_NEEDNUMBER = $0002; (**< Needs '%d' in filename. *)
AVFMT_SHOW_IDS = $0008; (**< Show format stream IDs numbers. *)
AVFMT_RAWPICTURE = $0020; (**< Format wants AVPicture structure for
raw picture data. *)
AVFMT_GLOBALHEADER = $0040; (**< Format wants global header. *)
AVFMT_NOTIMESTAMPS = $0080; (**< Format does not need / have any timestamps. *)
AVFMT_GENERIC_INDEX = $0100; (**< Use generic index building code. *)
AVFMT_TS_DISCONT = $0200; (**< Format allows timestamp discontinuities. *)
AVFMT_VARIABLE_FPS = $0400; (**< Format allows variable fps. *)
AVFMT_NODIMENSIONS = $0800; (**< Format does not need width/height *)
AVFMT_NOSTREAMS = $1000; (**< Format does not require any streams *)
AVFMT_NOBINSEARCH = $2000; (**< Format does not allow to fall back to binary search via read_timestamp *)
AVFMT_NOGENSEARCH = $4000; (**< Format does not allow to fall back to generic search *)
AVFMT_NO_BYTE_SEEK = $8000; (**< Format does not allow seeking by bytes *)
AVFMT_ALLOW_FLUSH = $10000;(**< Format allows flushing. If not set, the muxer will not receive a NULL packet in the write_packet function. *)
{$IF LIBAVFORMAT_VERSION_MAJOR <= 54}
AVFMT_TS_NONSTRICT = $8020000; //we try to be compatible to the ABIs of ffmpeg and major forks
{$ELSE}
AVFMT_TS_NONSTRICT = $20000;
{$ENDIF}
(**< Format does not require strictly
increasing timestamps, but they must
still be monotonic *)
AVFMT_TS_NEGATIVE = $40000; (**< Format allows muxing negative
timestamps. If not set the timestamp
will be shifted in av_write_frame and
av_interleaved_write_frame so they
start from 0.
The user or muxer can override this through
AVFormatContext.avoid_negative_ts
*)
AVFMT_SEEK_TO_PTS = $4000000; (**< Seeking is based on PTS *)
// used by AVIndexEntry
AVINDEX_KEYFRAME = $0001;
AVFMTCTX_NOHEADER = $0001; (**< signal that no header is present
(streams are added dynamically) *)
MAX_STREAMS = 20;
AVFMT_FLAG_GENPTS = $0001; ///< Generate missing pts even if it requires parsing future frames.
AVFMT_FLAG_IGNIDX = $0002; ///< Ignore index.
AVFMT_FLAG_NONBLOCK = $0004; ///< Do not block when reading packets from input.
AVFMT_FLAG_IGNDTS = $0008; ///< Ignore DTS on frames that contain both DTS & PTS
AVFMT_FLAG_NOFILLIN = $0010; ///< Do not infer any values from other values, just return what is stored in the container
AVFMT_FLAG_NOPARSE = $0020; ///< Do not use AVParsers, you also must set AVFMT_FLAG_NOFILLIN as the fillin code works on frames and no parsing -> no frames. Also seeking to frames can not work if parsing to find frame boundaries has been disabled
AVFMT_FLAG_NOBUFFER = $0040; ///< Do not buffer frames when possible
AVFMT_FLAG_CUSTOM_IO = $0080; ///< The caller has supplied a custom AVIOContext, don't avio_close() it.
AVFMT_FLAG_DISCARD_CORRUPT = $0100; ///< Discard frames marked corrupted
AVFMT_FLAG_MP4A_LATM = $8000; ///< Enable RTP MP4A-LATM payload
AVFMT_FLAG_SORT_DTS = $10000; ///< try to interleave outputted packets by dts (using this flag can slow demuxing down)
AVFMT_FLAG_PRIV_OPT = $20000; ///< Enable use of private options by delaying codec open (this could be made default once all code is converted)
AVFMT_FLAG_KEEP_SIDE_DATA = $40000; ///< Don't merge side data but keep it separate.
MAX_STD_TIMEBASES = (60*12+6);
// used by AVStream
MAX_REORDER_DELAY = 16;
// used by TAVProgram
AV_PROGRAM_RUNNING = 1;
AV_DISPOSITION_DEFAULT = $0001;
AV_DISPOSITION_DUB = $0002;
AV_DISPOSITION_ORIGINAL = $0004;
AV_DISPOSITION_COMMENT = $0008;
AV_DISPOSITION_LYRICS = $0010;
AV_DISPOSITION_KARAOKE = $0020;
(**
* Track should be used during playback by default.
* Useful for subtitle track that should be displayed
* even when user did not explicitly ask for subtitles.
*)
AV_DISPOSITION_FORCED = $0040;
AV_DISPOSITION_HEARING_IMPAIRED = $0080; (**< stream for hearing impaired audiences *)
AV_DISPOSITION_VISUAL_IMPAIRED = $0100; (**< stream for visual impaired audiences *)
AV_DISPOSITION_CLEAN_EFFECTS = $0200; (**< stream without voice *)
(**
* The stream is stored in the file as an attached picture/"cover art" (e.g.
* APIC frame in ID3v2). The single packet associated with it will be returned
* among the first few packets read from the file unless seeking takes place.
* It can also be accessed at any time in AVStream.attached_pic.
*)
AV_DISPOSITION_ATTACHED_PIC = $0400;
(**
* To specify text track kind (different from subtitles default).
*)
AV_DISPOSITION_CAPTIONS = $10000;
AV_DISPOSITION_DESCRIPTIONS = $20000;
AV_DISPOSITION_METADATA = $40000;
(**
* Options for behavior on timestamp wrap detection.
*)
AV_PTS_WRAP_IGNORE = 0; ///< ignore the wrap
AV_PTS_WRAP_ADD_OFFSET = 1; ///< add the format specific offset on wrap detection
AV_PTS_WRAP_SUB_OFFSET = -1; ///< subtract the format specific offset on wrap detection
// used by TAVFormatContext.debug
FF_FDEBUG_TS = 0001;
MAX_PROBE_PACKETS = 2500;
RAW_PACKET_BUFFER_SIZE = 2500000;
type
PPAVCodecTag = ^PAVCodecTag;
PAVCodecTag = Pointer;
PAVOutputFormat = ^TAVOutputFormat;
PAVProbeData = ^TAVProbeData;
PAVInputFormat = ^TAVInputFormat;
PAVIndexEntry = ^TAVIndexEntry;
PPAVStream = ^PAVStream;
PAVStream = ^TAVStream;
PAVPacketList = ^TAVPacketList;
TAVPacketList = record
pkt: TAVPacket;
next: PAVPacketList;
end; (*AVPacketList*)
PPAVProgram = ^PAVProgram;
PAVProgram = ^TAVProgram;
PPAVFormatContext = ^PAVFormatContext;
PAVFormatContext = ^TAVFormatContext;
(**
* Convert all the metadata sets from ctx according to the source and
* destination conversion tables.
*
* @param d_conv destination tags format conversion table
* @param s_conv source tags format conversion table
*)
PAVMetadataConv = ^TAVMetadataConv;
TAVMetadataConv = record
ctx: PAVFormatContext;
d_conv: {const} PAVMetadataConv;
s_conv: {const} PAVMetadataConv;
end;
(**
* @addtogroup lavf_encoding
* @{
*)
TAVOutputFormat = record
name: PAnsiChar;
(**
* Descriptive name for the format, meant to be more human-readable
* than name. You should use the NULL_IF_CONFIG_SMALL() macro
* to define it.
*)
long_name: PAnsiChar;
mime_type: PAnsiChar;
extensions: PAnsiChar; (**< comma-separated filename extensions *)
(* output support *)
audio_codec: TAVCodecID; (**< default audio codec *)
video_codec: TAVCodecID; (**< default video codec *)
subtitle_codec: TAVCodecID; (**< default subtitle codec *)
(**
* can use flags: AVFMT_NOFILE, AVFMT_NEEDNUMBER, AVFMT_RAWPICTURE,
* AVFMT_GLOBALHEADER, AVFMT_NOTIMESTAMPS, AVFMT_VARIABLE_FPS,
* AVFMT_NODIMENSIONS, AVFMT_NOSTREAMS, AVFMT_ALLOW_FLUSH,
* AVFMT_TS_NONSTRICT
*)
flags: cint;
(**
* List of supported codec_id-codec_tag pairs, ordered by "better
* choice first". The arrays are all terminated by AV_CODEC_ID_NONE.
*)
codec_tag: {const} PPAVCodecTag;
priv_class: {const} PAVClass; ///< AVClass for the private context
(*****************************************************************
* No fields below this line are part of the public API. They
* may not be used outside of libavformat and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*)
next: PAVOutputFormat;
(**
* size of private data so that it can be allocated in the wrapper
*)
priv_data_size: cint;
write_header: function (c: PAVFormatContext): cint; cdecl;
(**
* Write a packet. If AVFMT_ALLOW_FLUSH is set in flags,
* pkt can be NULL in order to flush data buffered in the muxer.
* When flushing, return 0 if there still is more data to flush,
* or 1 if everything was flushed and there is no more buffered
* data.
*)
write_packet: function (c: PAVFormatContext; pkt: PAVPacket): cint; cdecl;
write_trailer: function (c: PAVFormatContext): cint; cdecl;
(**
* Currently only used to set pixel format if not YUV420P.
*)
interleave_packet: function (s: PAVFormatContext; out_: PAVPacket;
in_: PAVPacket; flush: cint): cint; cdecl;
(**
* Test if the given codec can be stored in this container.
*
* @return 1 if the codec is supported, 0 if it is not.
* A negative number if unknown.
* MKTAG('A', 'P', 'I', 'C') if the codec is only supported as AV_DISPOSITION_ATTACHED_PIC
*)
query_codec: function (id: TAVCodecID; std_compliance: cint): cint; cdecl;
get_output_timestamp: procedure (s: PAVFormatContext; stream: cint;
dts: Pcint64; wall: Pcint64); cdecl;
(**
* Allows sending messages from application to device.
*)
control_message: function(s: PAVFormatContext; type_: cint; data: pointer;
data_size: size_t): cint; cdecl;
(**
* Write an uncoded AVFrame.
*
* See av_write_uncoded_frame() for details.
*
* The library will free *frame afterwards, but the muxer can prevent it
* by setting the pointer to NULL.
*)
write_uncodec_frame: function(s: PAVFormatContext; stream_index: cint;
frame: ^PAVFrame; flags: cuint): cint; cdecl;
(**
* Returns device list with it properties.
* @see avdevice_list_devices() for more details.
*)
get_device_list: function(s: PAVFormatContext; device_list: PAVDeviceInfoList): cint; cdecl;
end;
(**
* @}
*)
(**
* @addtogroup lavf_decoding
* @{
*)
TAVInputFormat = record
(**
* A comma separated list of short names for the format. New names
* may be appended with a minor bump.
*)
name: PAnsiChar;
(**
* Descriptive name for the format, meant to be more human-readable
* than name. You should use the NULL_IF_CONFIG_SMALL() macro
* to define it.
*)
long_name: PAnsiChar;
(**
* Can use flags: AVFMT_NOFILE, AVFMT_NEEDNUMBER, AVFMT_SHOW_IDS,
* AVFMT_GENERIC_INDEX, AVFMT_TS_DISCONT, AVFMT_NOBINSEARCH,
* AVFMT_NOGENSEARCH, AVFMT_NO_BYTE_SEEK, AVFMT_SEEK_TO_PTS.
*)
flags: cint;
(**
* If extensions are defined, then no probe is done. You should
* usually not use extension format guessing because it is not
* reliable enough
*)
extensions: PAnsiChar;
codec_tag: {const} PPAVCodecTag;
priv_class: {const} PAVClass; ///< AVClass for the private context
(*****************************************************************
* No fields below this line are part of the public API. They
* may not be used outside of libavformat and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*)
next: PAVInputFormat;
(**
* Raw demuxers store their codec ID here.
*)
raw_codec_id: cint;
(**
* Size of private data so that it can be allocated in the wrapper.
*)
priv_data_size: cint;
(**
* Tell if a given file has a chance of being parsed as this format.
* The buffer provided is guaranteed to be AVPROBE_PADDING_SIZE bytes
* big so you do not have to check for that unless you need more.
*)
read_probe: function (p: PAVProbeData): cint; cdecl;
(**
* Read the format header and initialize the AVFormatContext
* structure. Return 0 if OK. Only used in raw format right
* now. 'avformat_new_stream' should be called to create new streams.
*)
read_header: function (c: PAVFormatContext): cint; cdecl;
(**
* Read one packet and put it in 'pkt'. pts and flags are also
* set. 'avformat_new_stream' can be called only if the flag
* AVFMTCTX_NOHEADER is used.
* @return 0 on success, < 0 on error.
* When returning an error, pkt must not have been allocated
* or must be freed before returning
*)
read_packet: function (c: PAVFormatContext; var pkt: TAVPacket): cint; cdecl;
(**
* Close the stream. The AVFormatContext and AVStreams are not
* freed by this function
*)
read_close: function (c: PAVFormatContext): cint; cdecl;
(**
* Seek to a given timestamp relative to the frames in
* stream component stream_index.
* @param stream_index Must not be -1.
* @param flags Selects which direction should be preferred if no exact
* match is available.
* @return >= 0 on success (but not necessarily the new offset)
*)
read_seek: function (c: PAVFormatContext; stream_index: cint;
timestamp: cint64; flags: cint): cint; cdecl;
(**
* Get the next timestamp in stream[stream_index].time_base units.
* @return the timestamp or AV_NOPTS_VALUE if an error occurred
*)
read_timestamp: function (s: PAVFormatContext; stream_index: cint;
pos: pint64; pos_limit: cint64): cint64; cdecl;
(**
* Start/resume playing - only meaningful if using a network-based format
* (RTSP).
*)
read_play: function (c: PAVFormatContext): cint; cdecl;
(**
* Pause playing - only meaningful if using a network-based format
* (RTSP).
*)
read_pause: function (c: PAVFormatContext): cint; cdecl;
(**
* Seek to timestamp ts.
* Seeking will be done so that the point from which all active streams
* can be presented successfully will be closest to ts and within min/max_ts.
* Active streams are all streams that have AVStream.discard < AVDISCARD_ALL.
*)
read_seek2: function (s: PAVFormatContext;
stream_index: cint;
min_ts: cint64;
ts: cint64;
max_ts: cint64;
flags: cint): cint; cdecl;
(**
* Returns device list with it properties.
* @see avdevice_list_devices() for more details.
*)
get_device_list: function(s: PAVFormatContext; device_list: PAVDeviceInfoList): cint; cdecl;
end;
(**
* @}
*)
TAVStreamParseType = (
AVSTREAM_PARSE_NONE,
AVSTREAM_PARSE_FULL, (**< full parsing and repack *)
AVSTREAM_PARSE_HEADERS, (**< Only parse headers, do not repack. *)
AVSTREAM_PARSE_TIMESTAMPS, (**< full parsing and interpolation of timestamps for frames not starting on a packet boundary *)
AVSTREAM_PARSE_FULL_ONCE, (**< full parsing and repack of the first frame only, only implemented for H.264 currently *)
AVSTREAM_PARSE_FULL_RAW = $57415230 // MKTAG(0,'R','A','W'),
(**< full parsing and repack with timestamp and position generation by parser for raw
this assumes that each packet in the file contains no demuxer level headers and
just codec level data, otherwise position generation would fail *)
);
TAVIndexEntry = record
pos: cint64;
timestamp: cint64; (**<
* Timestamp in AVStream.time_base units, preferably the time from which on correctly decoded frames are available
* when seeking to this entry. That means preferable PTS on keyframe based formats.
* But demuxers can choose to store a different timestamp, if it is more convenient for the implementation or nothing better
* is known
*)
{ Delphi doesn't support bitfields -> use flags_size instead
int flags:2;
int size:30; //Yeah, trying to keep the size of this small to reduce memory requirements (it is 24 vs. 32 bytes due to possible 8-byte alignment).
}
flags_size: cint; // 0..1: flags, 2..31: size
min_distance: cint; (**< Minimum distance between this and the previous keyframe, used to avoid unneeded searching. *)
end;
Tduration_error = array[0..1] of array[0..MAX_STD_TIMEBASES - 1] of cdouble;
PStreamInfo = ^TStreamInfo;
TStreamInfo = record
last_dts: cint64;
duration_gcd: cint64;
duration_count: cint;
rfps_duration_sum: cint64;
duration_error: ^Tduration_error;
codec_info_duration: cint64;
codec_info_duration_fields: cint64;
(**
* 0 -> decoder has not been searched for yet.
* >0 -> decoder found
* <0 -> decoder with codec_id == -found_decoder has not been found
*)
found_decoder: cint;
(**
* Those are used for average framerate estimation.
*)
fps_first_dts: cint64;
fps_first_dts_idx: cint;
fps_last_dts: cint64;
fps_last_dts_idx: cint;
end;
(**
* Stream structure.
* New fields can be added to the end with minor version bumps.
* Removal, reordering and changes to existing fields require a major
* version bump.
* sizeof(AVStream) must not be used outside libav*.
*)
TAVStream = record
index: cint; (**< stream index in AVFormatContext *)
(**
* Format-specific stream ID.
* decoding: set by libavformat
* encoding: set by the user, replaced by libavformat if left unset
*)
id: cint; (**< format-specific stream ID *)
(**
* Codec context associated with this stream. Allocated and freed by
* libavformat.
*
* - decoding: The demuxer exports codec information stored in the headers
* here.
* - encoding: The user sets codec information, the muxer writes it to the
* output. Mandatory fields as specified in AVCodecContext
* documentation must be set even if this AVCodecContext is
* not actually used for encoding.
*)
codec: PAVCodecContext; (**< codec context *)
priv_data: pointer;
(**
* encoding: pts generation when outputting stream
*)
pts: TAVFrac;
(**
* This is the fundamental unit of time (in seconds) in terms
* of which frame timestamps are represented.
*
* decoding: set by libavformat
* encoding: set by libavformat in avformat_write_header. The muxer may use the
* user-provided value of @ref AVCodecContext.time_base "codec->time_base"
* as a hint.
*)
time_base: TAVRational;
(**
* Decoding: pts of the first frame of the stream in presentation order, in stream time base.
* Only set this if you are absolutely 100% sure that the value you set
* it to really is the pts of the first frame.
* This may be undefined (AV_NOPTS_VALUE).
* @note The ASF header does NOT contain a correct start_time the ASF
* demuxer must NOT set this.
*)
start_time: cint64;
(**
* Decoding: duration of the stream, in stream time base.
* If a source file does not specify a duration, but does specify
* a bitrate, this value will be estimated from bitrate and file size.
*)
duration: cint64;
nb_frames: cint64; ///< number of frames in this stream if known or 0
disposition: cint; (**< AV_DISPOSITION_* bitfield *)
discard: TAVDiscard; ///< Selects which packets can be discarded at will and do not need to be demuxed.
(**
* sample aspect ratio (0 if unknown)
* - encoding: Set by user.
* - decoding: Set by libavformat.
*)
sample_aspect_ratio: TAVRational;
metadata: PAVDictionary;
(**
* Average framerate
*)
avg_frame_rate: TAVRational;
(**
* For streams with AV_DISPOSITION_ATTACHED_PIC disposition, this packet
* will contain the attached picture.
*
* decoding: set by libavformat, must not be modified by the caller.
* encoding: unused
*)
attached_pic: TAVPacket;
(*****************************************************************
* All fields below this line are not part of the public API. They
* may not be used outside of libavformat and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*)
(**
* Stream information used internally by av_find_stream_info()
*)
info: PStreamInfo;
pts_wrap_bits: cint; (**< number of bits in pts (used for wrapping control) *)
{$IFDEF FF_API_REFERENCE_DTS}
(* a hack to keep ABI compatibility for ffmpeg and other applications, which accesses parser even
* though it should not *)
do_not_use: cint64;
{$ENDIF}
// Timestamp generation support:
(**
* Timestamp corresponding to the last dts sync point.
*
* Initialized when AVCodecParserContext.dts_sync_point >= 0 and
* a DTS is received from the underlying container. Otherwise set to
* AV_NOPTS_VALUE by default.
*)
first_dts: cint64;
cur_dts: cint64;
last_IP_pts: cint64;
last_IP_duration: cint;
(**
* Number of packets to buffer for codec probing
*)
probe_packets: cint;
(**
* Number of frames that have been demuxed during av_find_stream_info()
*)
codec_info_nb_frames: cint;
(* av_read_frame() support *)
need_parsing: TAVStreamParseType;
parser: PAVCodecParserContext;
(**
* last packet in packet_buffer for this stream when muxing.
*)
last_in_packet_buffer: PAVPacketList;
probe_data: TAVProbeData;
pts_buffer: array [0..MAX_REORDER_DELAY] of cint64;
index_entries: PAVIndexEntry; (**< Only used if the format does not
support seeking natively. *)
nb_index_entries: cint;
index_entries_allocated_size: cuint;
(**
* Real base framerate of the stream.
* This is the lowest framerate with which all timestamps can be
* represented accurately (it is the least common multiple of all
* framerates in the stream). Note, this value is just a guess!
* For example, if the time base is 1/90000 and all frames have either
* approximately 3600 or 1800 timer ticks, then r_frame_rate will be 50/1.
*
* Code outside avformat should access this field using:
* av_stream_get/set_r_frame_rate(stream)
*)
r_frame_rate: TAVRational;
(**
* Stream Identifier
* This is the MPEG-TS stream identifier +1
* 0 means unknown
*)
stream_identifier: cint;
interleaver_chunk_size: cint64;
interleaver_chunk_duration: cint64;
(**
* stream probing state
* -1 -> probing finished
* 0 -> no probing requested
* rest -> perform probing with request_probe being the minimum score to accept.
* NOT PART OF PUBLIC API
*)
request_probe: cint;
(**
* Indicates that everything up to the next keyframe
* should be discarded.
*)
skip_to_keyframe: cint;
(**
* Number of samples to skip at the start of the frame decoded from the next packet.
*)
skip_samples: cint;
(**
* Number of internally decoded frames, used internally in libavformat, do not access
* its lifetime differs from info which is why it is not in that structure.
*)
nb_decoded_frames: cint;
(**
* Timestamp offset added to timestamps before muxing
* NOT PART OF PUBLIC API
*)
mux_ts_offset: cint64;
(**
* Internal data to check for wrapping of the time stamp
*)
pts_wrap_reference: cint64;
(**
* Options for behavior, when a wrap is detected.
*
* Defined by AV_PTS_WRAP_ values.
*
* If correction is enabled, there are two possibilities:
* If the first time stamp is near the wrap point, the wrap offset
* will be subtracted, which will create negative time stamps.
* Otherwise the offset will be added.
*)
pts_wrap_behavior: cint;
(**
* Internal data to prevent doing update_initial_durations() twice
*)
update_initial_durations_done: cint;
(**
* Internal data to generate dts from pts
*)
pts_reorder_error: array[0..MAX_REORDER_DELAY] of cint64;
pts_reorder_error_count: array[0..MAX_REORDER_DELAY] of byte;
(**
* Internal data to analyze DTS and detect faulty mpeg streams
*)
last_dts_for_order_check: cint64;
dts_ordered: byte;
dts_misordered: byte;
end; (** TAVStream **)
(**
* New fields can be added to the end with minor version bumps.
* Removal, reordering and changes to existing fields require a major
* version bump.
* sizeof(AVProgram) must not be used outside libav*.
*)
TAVProgram = record
id: cint;
flags: cint;
discard: TAVDiscard; ///< selects which program to discard and which to feed to the caller
stream_index: Pcuint;
nb_stream_indexes: cuint;
metadata: PAVDictionary;
program_num: cint;
pmt_pid: cint;
pcr_pid: cint;
(*****************************************************************
* All fields below this line are not part of the public API. They
* may not be used outside of libavformat and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*)
start_time: cint64;
end_time: cint64;
pts_wrap_reference: cint64; ///< reference dts for wrap detection
pts_wrap_behavior: cint; ///< behavior on wrap detection
end; (*AVProgram*)
PAVChapter = ^TAVChapter;
TAVChapter = record
id: cint; ///< unique ID to identify the chapter
time_base: TAVRational; ///< time base in which the start/end timestamps are specified
start, end_: cint64; ///< chapter start/end time in time_base units
metadata: PAVDictionary;
end; (*AVChapter*)
TAVChapterArray = array[0..(MaxInt div SizeOf(TAVChapter))-1] of TAVChapter;
PAVChapterArray = ^TAVChapterArray;
(**
* The duration of a video can be estimated through various ways, and this enum can be used
* to know how the duration was estimated.
*)
TAVDurationEstimationMethod = (
AVFMT_DURATION_FROM_PTS, ///< Duration accurately estimated from PTSes
AVFMT_DURATION_FROM_STREAM, ///< Duration estimated from a stream with a known duration
AVFMT_DURATION_FROM_BITRATE ///< Duration estimated from bitrate (less accurate)
);
PAVFormatInternal = ^TAVFormatInternal;
TAVFormatInternal = record
(**
* Number of streams relevant for interleaving.
* Muxing only.
*)
nb_interleaved_streams: cint;
inject_global_side_data: cint;
end;
TAv_format_control_message = function (s: PAVFormatContext; type_: cint;
data: pointer; data_size: size_t): cint; cdecl;
(**
* Format I/O context.
* New fields can be added to the end with minor version bumps.
* Removal, reordering and changes to existing fields require a major
* version bump.
* sizeof(AVFormatContext) must not be used outside libav*, use
* avformat_alloc_context() to create an AVFormatContext.
*)
TAVFormatContext = record
(**
* A class for logging and @ref avoptions. Set by avformat_alloc_context().
* Exports (de)muxer private options if they exist.
*)
av_class: PAVClass; (**< Set by avformat_alloc_context. *)
(**
* The input container format.
*
* Demuxing only, set by avformat_open_input().
*)
iformat: PAVInputFormat;
(**
* The output container format.
*
* Muxing only, must be set by the caller before avformat_write_header().
*)
oformat: PAVOutputFormat;
(**
* Format private data. This is an AVOptions-enabled struct
* if and only if iformat/oformat.priv_class is not NULL.
*
* - muxing: set by avformat_write_header()
* - demuxing: set by avformat_open_input()
*)
priv_data: pointer;
(*
* I/O context.
*
* - demuxing: either set by the user before avformat_open_input() (then
* the user must close it manually) or set by avformat_open_input().
* - muxing: set by the user before avformat_write_header(). The caller must
* take care of closing / freeing the IO context.
*
* Do NOT set this field if AVFMT_NOFILE flag is set in
* iformat/oformat.flags. In such a case, the (de)muxer will handle
* I/O in some other way and this field will be NULL.
*)
pb: PAVIOContext;
(* stream info *)
ctx_flags: cint; (**< Format-specific flags, see AVFMTCTX_xx *)
(**
* Number of elements in AVFormatContext.streams.
*
* Set by avformat_new_stream(), must not be modified by any other code.
*)
nb_streams: cuint;
(**
* A list of all streams in the file. New streams are created with
* avformat_new_stream().
*
* - demuxing: streams are created by libavformat in avformat_open_input().
* If AVFMTCTX_NOHEADER is set in ctx_flags, then new streams may also
* appear in av_read_frame().
* - muxing: streams are created by the user before avformat_write_header().
*
* Freed by libavformat in avformat_free_context().
*)
streams: PPAVStream;
(**
* input or output filename
*
* - demuxing: set by avformat_open_input()
* - muxing: may be set by the caller before avformat_write_header()
*)
filename: array [0..1023] of AnsiChar; (* input or output filename *)
(**
* Position of the first frame of the component, in
* AV_TIME_BASE fractional seconds. NEVER set this value directly:
* It is deduced from the AVStream values.
*
* Demuxing only, set by libavformat.
*)
start_time: cint64;
(**
* Duration of the stream, in AV_TIME_BASE fractional
* seconds. Only set this value if you know none of the individual stream
* durations and also dont set any of them. This is deduced from the
* AVStream values if not set.
*)
duration: cint64;
(**
* Total stream bitrate in bit/s, 0 if not
* available. Never set it directly if the file_size and the
* duration are known as ffmpeg can compute it automatically.
*)
bit_rate: cint;
packet_size: cuint;
max_delay: cint;
flags: cint;
(**
* Maximum size of the data read from input for determining
* the input container format.
* Demuxing only, set by the caller before avformat_open_input().
*)
probesize: cuint;
(**
* Maximum duration (in AV_TIME_BASE units) of the data read
* from input in avformat_find_stream_info().
* Demuxing only, set by the caller before avformat_find_stream_info().
*)
max_analyze_duration: cint;
key: pbyte;
keylen: cint;
nb_programs: cuint;
programs: PPAVProgram;
(**
* Forced video codec_id.
* Demuxing: Set by user.
*)
video_codec_id: TAVCodecID;
(**
* Forced audio codec_id.
* Demuxing: Set by user.
*)
audio_codec_id: TAVCodecID;
(**
* Forced subtitle codec_id.
* Demuxing: Set by user.
*)
subtitle_codec_id: TAVCodecID;
(**
* Maximum amount of memory in bytes to use for the index of each stream.
* If the index exceeds this size, entries will be discarded as
* needed to maintain a smaller size. This can lead to slower or less
* accurate seeking (depends on demuxer).
* Demuxers for which a full in-memory index is mandatory will ignore
* this.
* - muxing: unused
* - demuxing: set by user
*)
max_index_size: cuint;
(**
* Maximum amount of memory in bytes to use for buffering frames
* obtained from realtime capture devices.
*)
max_picture_buffer: cuint;
nb_chapters: cuint;
chapters: PAVChapterArray;
(**
* Metadata that applies to the whole file.
*
* - demuxing: set by libavformat in avformat_open_input()
* - muxing: may be set by the caller before avformat_write_header()
*
* Freed by libavformat in avformat_free_context().
*)
metadata: PAVDictionary;
(**
* Start time of the stream in real world time, in microseconds
* since the Unix epoch (00:00 1st January 1970). That is, pts=0 in the
* stream was captured at this real world time.
* Muxing only, set by the caller before avformat_write_header().
*)
start_time_realtime: cint64;
(**
* The number of frames used for determining the framerate in
* avformat_find_stream_info().
* Demuxing only, set by the caller before avformat_find_stream_info().
*)
fps_probe_size: cint;
(**
* Error recognition; higher values will detect more errors but may
* misdetect some more or less valid parts as errors.
* Demuxing only, set by the caller before avformat_open_input().
*)
error_recognition: cint;
(**
* Custom interrupt callbacks for the I/O layer.
*
* demuxing: set by the user before avformat_open_input().
* muxing: set by the user before avformat_write_header()
* (mainly useful for AVFMT_NOFILE formats). The callback
* should also be passed to avio_open2() if it's used to
* open the file.
*)
interrupt_callback: TAVIOInterruptCB;
(**
* Flags to enable debugging.
*)
debug: cint;
(**
* Maximum buffering duration for interleaving.
*
* To ensure all the streams are interleaved correctly,
* av_interleaved_write_frame() will wait until it has at least one packet
* for each stream before actually writing any packets to the output file.
* When some streams are "sparse" (i.e. there are large gaps between
* successive packets), this can result in excessive buffering.
*
* This field specifies the maximum difference between the timestamps of the
* first and the last packet in the muxing queue, above which libavformat
* will output a packet regardless of whether it has queued a packet for all
* the streams.
*
* Muxing only, set by the caller before avformat_write_header().
*)
max_interleave_delta: cint64;
(**
* Transport stream id.
* This will be moved into demuxer private options. Thus no API/ABI compatibility
*)
ts_id: cint;
(**
* Audio preload in microseconds.
* Note, not all formats support this and unpredictable things may happen if it is used when not supported.
* - encoding: Set by user via AVOptions (NO direct access)
* - decoding: unused
*)
audio_preload: cint;
(**
* Max chunk time in microseconds.
* Note, not all formats support this and unpredictable things may happen if it is used when not supported.
* - encoding: Set by user via AVOptions (NO direct access)
* - decoding: unused
*)
max_chunk_duration: cint;
(**
* Max chunk size in bytes
* Note, not all formats support this and unpredictable things may happen if it is used when not supported.
* - encoding: Set by user via AVOptions (NO direct access)
* - decoding: unused
*)
max_chunk_size: cint;
(**
* forces the use of wallclock timestamps as pts/dts of packets
* This has undefined results in the presence of B frames.
* - encoding: unused
* - decoding: Set by user via AVOptions (NO direct access)
*)
use_wallclock_as_timestamps: cint;
(**
* Avoid negative timestamps during muxing
* 0 -> allow negative timestamps
* 1 -> avoid negative timestamps
* -1 -> choose automatically (default)
* Note, this only works when interleave_packet_per_dts is in use
* - encoding: Set by user via AVOptions (NO direct access)
* - decoding: unused
*)
avoid_negative_ts: cint;
(**
* avio flags, used to force AVIO_FLAG_DIRECT.
* - encoding: unused
* - decoding: Set by user via AVOptions (NO direct access)
*)
avio_flags: cint;
(**
* The duration field can be estimated through various ways, and this field can be used
* to know how the duration was estimated.
* - encoding: unused
* - decoding: Read by user via AVOptions (NO direct access)
*)
duration_estimation_method: TAVDurationEstimationMethod;
(**
* Skip initial bytes when opening stream
* - encoding: unused
* - decoding: Set by user via AVOptions (NO direct access)
*)
skip_initial_bytes: cuint;
(**
* Correct single timestamp overflows
* - encoding: unused
* - decoding: Set by user via AVOPtions (NO direct access)
*)
correct_ts_overflow: cuint;
(**
* Force seeking to any (also non key) frames.
* - encoding: unused
* - decoding: Set by user via AVOPtions (NO direct access)
*)
seek2any: cint;
(**
* Flush the I/O context after each packet.
* - encoding: Set by user via AVOptions (NO direct access)
* - decoding: unused
*)
flush_packets: cint;
(*****************************************************************
* All fields below this line are not part of the public API. They
* may not be used outside of libavformat and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*)
(**
* This buffer is only needed when packets were already buffered but
* not decoded, for example to get the codec parameters in MPEG
* streams.
*)
packet_buffer: PAVPacketList;
packet_buffer_end_: PAVPacketList;
(* av_seek_frame() support *)
data_offset: cint64; (**< offset of the first packet *)
(**
* Raw packets from the demuxer, prior to parsing and decoding.
* This buffer is used for buffering packets until the codec can
* be identified, as parsing cannot be done without knowing the
* codec.
*)
raw_packet_buffer_: PAVPacketList;
raw_packet_buffer_end_: PAVPacketList;
(**
* Packets split by the parser get queued here.
*)
parse_queue: PAVPacketList;
parse_queue_end: PAVPacketList;
(**
* Remaining size available for raw_packet_buffer, in bytes.
*)
raw_packet_buffer_remaining_size: cint;
(**
* Offset to remap timestamps to be non-negative.
* Expressed in timebase units.
* @see AVStream.mux_ts_offset
*)
offset: cint64;
(**
* Timebase for the timestamp offset.
*)
offset_timebase: TAVRational;
(**
* An opaque field for libavformat internal usage.
* Must not be accessed in any way by callers.
*)
internal: PAVFormatInternal;
(**
* IO repositioned flag.
* This is set by avformat when the underlaying IO context read pointer
* is repositioned, for example when doing byte based seeking.
* Demuxers can use the flag to detect such changes.
*)
io_repositioned: cint;
(**
* Forced video codec.
* This allows forcing a specific decoder, even when there are multiple with
* the same codec_id.
* Demuxing: Set by user via av_format_set_video_codec (NO direct access).
*)
video_codec: PAVCodec;
(**
* Forced audio codec.
* This allows forcing a specific decoder, even when there are multiple with
* the same codec_id.
* Demuxing: Set by user via av_format_set_audio_codec (NO direct access).
*)
audio_codec: PAVCodec;
(**
* Forced subtitle codec.
* This allows forcing a specific decoder, even when there are multiple with
* the same codec_id.
* Demuxing: Set by user via av_format_set_subtitle_codec (NO direct access).
*)
subtitle_codec: PAVCodec;
(**
* Number of bytes to be written as padding in a metadata header.
* Demuxing: Unused.
* Muxing: Set by user via av_format_set_metadata_header_padding.
*)
metadata_header_padding: cint;
(**
* User data.
* This is a place for some private data of the user.
* Mostly usable with control_message_cb or any future callbacks in device's context.
*)
opaque: pointer;
(**
* Callback used by devices to communicate with application.
*)
control_message_cb: TAv_format_control_message;
(**
* Output timestamp offset, in microseconds.
* Muxing: set by user via AVOptions (NO direct access)
*)
output_ts_offset: cint64;
end; (** TAVFormatContext **)
function av_format_get_probe_score(s: {const} PAVFormatContext): cint;
cdecl; external av__format;
function av_format_get_video_codec(s: {const} PAVFormatContext): PAVCodec;
cdecl; external av__format;
procedure av_format_set_video_codec(s: PAVFormatContext; c: PAVCodec);
cdecl; external av__format;
function av_format_get_audio_codec(s: {const} PAVFormatContext): PAVCodec;
cdecl; external av__format;
procedure av_format_set_audio_codec(s: PAVFormatContext; c: PAVCodec);
cdecl; external av__format;
function av_format_get_subtitle_codec(s: {const} PAVFormatContext): PAVCodec;
cdecl; external av__format;
procedure av_format_set_subtitle_codec(s: PAVFormatContext; c: PAVCodec);
cdecl; external av__format;
function av_format_get_metadata_header_padding(s: {const} PAVFormatContext): cint;
cdecl; external av__format;
procedure av_format_set_metadata_header_padding(s: PAVFormatContext; c: cint);
cdecl; external av__format;
procedure av_format_get_opaque(s: {const} PAVFormatContext);
cdecl; external av__format;
procedure av_format_set_opaque(s: PAVFormatContext; opaque: pointer);
cdecl; external av__format;
function av_format_get_control_message_cb(s: {const} PAVFormatContext): TAv_format_control_message;
cdecl; external av__format;
procedure av_format_set_control_message_cb(s: PAVFormatContext; callback: TAv_format_control_message);
cdecl; external av__format;
(** From libavdevice/avdevice.h **)
PPAVDeviceInfo = ^PAVDeviceInfo;
PAVDeviceInfo = ^TAVDeviceInfo;
TAVDeviceInfo = record
device_name: PAnsiChar; (**< device name, format depends on device *)
device_description: PAnsiChar; (**< human friendly name *)
end; {TAVDeviceInfo}
PAVDeviceInfoList = ^TAVDeviceInfoList;
TAVDeviceInfoList = record
devices: PPAVDeviceInfo; (**< list of autodetected devices *)
nb_devices: cint; (**< number of autodetected devices *)
default_device: cint; (**< index of default device or -1 if no default *)
end; {TAVDeviceInfoList}
function av_stream_get_r_frame_rate({const} s: PAVStream): TAVRational;
cdecl; external av__format;
procedure av_stream_set_r_frame_rate(s: PAVStream; r: TAVRational);
cdecl; external av__format;
(**
* Returns the method used to set ctx->duration.
*
* @return AVFMT_DURATION_FROM_PTS, AVFMT_DURATION_FROM_STREAM, or AVFMT_DURATION_FROM_BITRATE.
*)
function av_fmt_ctx_get_duration_estimation_method(ctx: {const} PAVFormatContext): TAVDurationEstimationMethod;
cdecl; external av__format;
(**
* @defgroup lavf_core Core functions
* @ingroup libavf
*
* Functions for querying libavformat capabilities, allocating core structures,
* etc.
* @{
*)
(**
* Return the LIBAVFORMAT_VERSION_INT constant.
*)
function avformat_version(): cuint;
cdecl; external av__format;
(**
* Return the libavformat build-time configuration.
*)
function avformat_configuration(): {const} PansiChar;
cdecl; external av__format;
(**
* Return the libavformat license.
*)
function avformat_license(): {const} PansiChar;
cdecl; external av__format;
(**
* Initialize libavformat and register all the muxers, demuxers and
* protocols. If you do not call this function, then you can select
* exactly which formats you want to support.
*
* @see av_register_input_format()
* @see av_register_output_format()
* @see av_register_protocol()
*)
procedure av_register_all();
cdecl; external av__format;
procedure av_register_input_format(format: PAVInputFormat);
cdecl; external av__format;
procedure av_register_output_format(format: PAVOutputFormat);
cdecl; external av__format;
(**
* Do global initialization of network components. This is optional,
* but recommended, since it avoids the overhead of implicitly
* doing the setup for each session.
*
* Calling this function will become mandatory if using network
* protocols at some major version bump.
*)
function avformat_network_init(): cint;
cdecl; external av__format;
(**
* Undo the initialization done by avformat_network_init.
*)
function avformat_network_deinit(): cint;
cdecl; external av__format;
(**
* If f is NULL, returns the first registered input format,
* if f is non-NULL, returns the next registered input format after f
* or NULL if f is the last one.
*)
function av_iformat_next(f: PAVInputFormat): PAVInputFormat;
cdecl; external av__format;
(**
* If f is NULL, returns the first registered output format,
* if f is non-NULL, returns the next registered input format after f
* or NULL if f is the last one.
*)
function av_oformat_next(f: PAVOutputFormat): PAVOutputFormat;
cdecl; external av__format;
(**
* Allocate an AVFormatContext.
* Can be freed with av_free() but do not forget to free everything you
* explicitly allocated as well!
*)
function avformat_alloc_context(): PAVFormatContext;
cdecl; external av__format;
(**
* Free an AVFormatContext and all its streams.
* @param s context to free
*)
procedure avformat_free_context(s: PAVFormatContext);
cdecl; external av__format;
(**
* Get the AVClass for AVFormatContext. It can be used in combination with
* AV_OPT_SEARCH_FAKE_OBJ for examining options.
*
* @see av_opt_find().
*)
function avformat_get_class(): {const} PAVClass;
cdecl; external av__format;
(**
* Add a new stream to a media file.
*
* When demuxing, it is called by the demuxer in read_header(). If the
* flag AVFMTCTX_NOHEADER is set in s.ctx_flags, then it may also
* be called in read_packet().
*
* When muxing, should be called by the user before avformat_write_header().
*
* User is required to call avcodec_close() and avformat_free_context() to
* clean up the allocation by avformat_new_stream().
*
* @param s media file handle
* @param c If non-NULL, the AVCodecContext corresponding to the new stream
* will be initialized to use this codec. This is needed for e.g. codec-specific
* defaults to be set, so codec should be provided if it is known.
*
* @return newly created stream or NULL on error.
*)
function avformat_new_stream(s: PAVFormatContext; c: {const} PAVCodec): PAVStream;
cdecl; external av__format;
function av_new_program(s: PAVFormatContext; id: cint): PAVProgram;
cdecl; external av__format;
(**
* @}
*)
{$IFDEF FF_API_PKT_DUMP}
procedure av_pkt_dump(f: PAVFile; pkt: PAVPacket; dump_payload: cint); {deprecated}
cdecl; external av__format;
procedure av_pkt_dump_log(avcl: Pointer; level: cint; pkt: PAVPacket; dump_payload: cint); {deprecated}
cdecl; external av__format;
{$IFEND}
{$IFDEF FF_API_ALLOC_OUTPUT_CONTEXT}
(**
* @deprecated deprecated in favor of avformat_alloc_output_context2()
*)
function avformat_alloc_output_context({const} format: PAnsiChar;
oformat: PAVOutputFormat;
{const} filename: PAnsiChar): PAVFormatContext;
cdecl; external av__format;
{$IFEND}
(**
* Allocate an AVFormatContext for an output format.
* avformat_free_context() can be used to free the context and
* everything allocated by the framework within it.
*
* @param *ctx is set to the created format context, or to NULL in
* case of failure
* @param oformat format to use for allocating the context, if NULL
* format_name and filename are used instead
* @param format_name the name of output format to use for allocating the
* context, if NULL filename is used instead
* @param filename the name of the filename to use for allocating the
* context, may be NULL
* @return >= 0 in case of success, a negative AVERROR code in case of
* failure
*)
function avformat_alloc_output_context2(ctx: PPAVFormatContext; oformat: PAVOutputFormat;
{const} format_name: PAnsiChar; {const} filename: PAnsiChar): cint;
cdecl; external av__format;
(**
* @addtogroup lavf_decoding
* @
*)
(**
* Find AVInputFormat based on the short name of the input format.
*)
function av_find_input_format(short_name: PAnsiChar): PAVInputFormat;
cdecl; external av__format;
(**
* Guess the file format.
*
* @param pd data to be probed
* @param is_opened Whether the file is already opened; determines whether
* demuxers with or without AVFMT_NOFILE are probed.
*)
function av_probe_input_format(pd: PAVProbeData; is_opened: cint): PAVInputFormat;
cdecl; external av__format;
(**
* Guess the file format.
*
* @param pd data to be probed
* @param is_opened Whether the file is already opened; determines whether
* demuxers with or without AVFMT_NOFILE are probed.
* @param score_max A probe score larger that this is required to accept a
* detection, the variable is set to the actual detection
* score afterwards.
* If the score is <= AVPROBE_SCORE_MAX / 4 it is recommended
* to retry with a larger probe buffer.
*)
function av_probe_input_format2(pd: PAVProbeData; is_opened: cint; score_max: PCint): PAVInputFormat;
cdecl; external av__format;
(**
* Guess the file format.
*
* @param is_opened Whether the file is already opened; determines whether
* demuxers with or without AVFMT_NOFILE are probed.
* @param score_ret The score of the best detection.
*)
function av_probe_input_format3(pd: PAVProbeData; is_opened: cint; score_ret: Pcint): PAVInputFormat;
cdecl; external av__format;
(**
* Probe a bytestream to determine the input format. Each time a probe returns
* with a score that is too low, the probe buffer size is increased and another
* attempt is made. When the maximum probe size is reached, the input format
* with the highest score is returned.
*
* @param pb the bytestream to probe
* @param fmt the input format is put here
* @param filename the filename of the stream
* @param logctx the log context
* @param offset the offset within the bytestream to probe from
* @param max_probe_size the maximum probe buffer size (zero for default)
* @return 0 in case of success, a negative value corresponding to an
* AVERROR code otherwise
*)
function av_probe_input_buffer(pb: PAVIOContext; var fmt: PAVInputFormat;
filename: {const} PAnsiChar; logctx: pointer;
offset: cuint; max_probe_size: cuint): cint;
cdecl; external av__format;
(**
* Open an input stream and read the header. The codecs are not opened.
* The stream must be closed with av_close_input_file().
*
* @param ps Pointer to user-supplied AVFormatContext (allocated by avformat_alloc_context).
* May be a pointer to NULL, in which case an AVFormatContext is allocated by this
* function and written into ps.
* Note that a user-supplied AVFormatContext will be freed on failure.
* @param filename Name of the stream to open.
* @param fmt If non-NULL, this parameter forces a specific input format.
* Otherwise the format is autodetected.
* @param options A dictionary filled with AVFormatContext and demuxer-private options.
* On return this parameter will be destroyed and replaced with a dict containing
* options that were not found. May be NULL.
*
* @return 0 on success, a negative AVERROR on failure.
*
* @note If you want to use custom IO, preallocate the format context and set its pb field.
*)
function avformat_open_input(ps: PPAVFormatContext; filename: {const} PAnsiChar; fmt: PAVInputFormat; options: PPAVDictionary): cint;
cdecl; external av__format;
function av_demuxer_open(ic: PAVFormatContext): cint;
cdecl; external av__format; deprecated;
{$IFDEF FF_API_FORMAT_PARAMETERS}
(**
* Read packets of a media file to get stream information. This
* is useful for file formats with no headers such as MPEG. This
* function also computes the real framerate in case of MPEG-2 repeat
* frame mode.
* The logical file position is not changed by this function;
* examined packets may be buffered for later processing.
*
* @param ic media file handle
* @return >=0 if OK, AVERROR_xxx on error
* @todo Let the user decide somehow what information is needed so that
* we do not waste time getting stuff the user does not need.
*
* @deprecated use avformat_find_stream_info.
*)
function av_find_stream_info(ic: PAVFormatContext): cint;
cdecl; external av__format; deprecated;
{$IFEND}
(**
* Read packets of a media file to get stream information. This
* is useful for file formats with no headers such as MPEG. This
* function also computes the real framerate in case of MPEG-2 repeat
* frame mode.
* The logical file position is not changed by this function;
* examined packets may be buffered for later processing.
*
* @param ic media file handle
* @param options If non-NULL, an ic.nb_streams long array of pointers to
* dictionaries, where i-th member contains options for
* codec corresponding to i-th stream.
* On return each dictionary will be filled with options that were not found.
* @return >=0 if OK, AVERROR_xxx on error
*
* @note this function isn't guaranteed to open all the codecs, so
* options being non-empty at return is a perfectly normal behavior.
*
* @todo Let the user decide somehow what information is needed so that
* we do not waste time getting stuff the user does not need.
*)
function avformat_find_stream_info(ic: PAVFormatContext; options: PPAVDictionary): cint;
cdecl; external av__format;
(**
* Find the programs which belong to a given stream.
*
* @param ic media file handle
* @param last the last found program, the search will start after this
* program, or from the beginning if it is NULL
* @param s stream index
* @return the next program which belongs to s, NULL if no program is found or
* the last program is not among the programs of ic.
*)
function av_find_program_from_stream(ic: PAVFormatContext; last: PAVProgram; s: cint): PAVProgram;
cdecl; external av__format;
(**
* Find the "best" stream in the file.
* The best stream is determined according to various heuristics as the most
* likely to be what the user expects.
* If the decoder parameter is non-NULL, av_find_best_stream will find the
* default decoder for the stream's codec; streams for which no decoder can
* be found are ignored.
*
* @param ic media file handle
* @param type stream type: video, audio, subtitles, etc.
* @param wanted_stream_nb user-requested stream number,
* or -1 for automatic selection
* @param related_stream try to find a stream related (eg. in the same
* program) to this one, or -1 if none
* @param decoder_ret if non-NULL, returns the decoder for the
* selected stream
* @param flags flags; none are currently defined
* @return the non-negative stream number in case of success,
* AVERROR_STREAM_NOT_FOUND if no stream with the requested type
* could be found,
* AVERROR_DECODER_NOT_FOUND if streams were found but no decoder
* @note If av_find_best_stream returns successfully and decoder_ret is not
* NULL, then *decoder_ret is guaranteed to be set to a valid AVCodec.
*)
function av_find_best_stream(ic: PAVFormatContext;
type_: TAVMediaType;
wanted_stream_nb: cint;
related_stream: cint;
decoder_ret: PPAVCodec;
flags: cint): cint;
cdecl; external av__format;
(**
* Read a transport packet from a media file.
*
* This function is obsolete and should never be used.
* Use av_read_frame() instead.
*
* @param s media file handle
* @param pkt is filled
* @return 0 if OK, AVERROR_xxx on error
*)
function av_read_packet(s: PAVFormatContext; var pkt: TAVPacket): cint;
cdecl; external av__format;
(**
* Return the next frame of a stream.
* This function returns what is stored in the file, and does not validate
* that what is there are valid frames for the decoder. It will split what is
* stored in the file into frames and return one for each call. It will not
* omit invalid data between valid frames so as to give the decoder the maximum
* information possible for decoding.
*
* If pkt->buf is NULL, then the packet is valid until the next
* av_read_frame() or until av_close_input_file(). Otherwise the packet is valid
* indefinitely. In both cases the packet must be freed with
* av_free_packet when it is no longer needed. For video, the packet contains
* exactly one frame. For audio, it contains an integer number of frames if each
* frame has a known fixed size (e.g. PCM or ADPCM data). If the audio frames
* have a variable size (e.g. MPEG audio), then it contains one frame.
*
* pkt->pts, pkt->dts and pkt->duration are always set to correct
* values in AVStream.time_base units (and guessed if the format cannot
* provide them). pkt->pts can be AV_NOPTS_VALUE if the video format
* has B-frames, so it is better to rely on pkt->dts if you do not
* decompress the payload.
*
* @return 0 if OK, < 0 on error or end of file
*)
function av_read_frame(s: PAVFormatContext; var pkt: TAVPacket): cint;
cdecl; external av__format;
(**
* Seek to the keyframe at timestamp.
* 'timestamp' in 'stream_index'.
*
* @param s media file handle
* @param stream_index If stream_index is (-1), a default
* stream is selected, and timestamp is automatically converted
* from AV_TIME_BASE units to the stream specific time_base.
* @param timestamp Timestamp in AVStream.time_base units
* or, if no stream is specified, in AV_TIME_BASE units.
* @param flags flags which select direction and seeking mode
* @return >= 0 on success
*)
function av_seek_frame(s: PAVFormatContext; stream_index: cint; timestamp: cint64;
flags: cint): cint;
cdecl; external av__format;
(**
* Seek to timestamp ts.
* Seeking will be done so that the point from which all active streams
* can be presented successfully will be closest to ts and within min/max_ts.
* Active streams are all streams that have AVStream.discard < AVDISCARD_ALL.
*
* If flags contain AVSEEK_FLAG_BYTE, then all timestamps are in bytes and
* are the file position (this may not be supported by all demuxers).
* If flags contain AVSEEK_FLAG_FRAME, then all timestamps are in frames
* in the stream with stream_index (this may not be supported by all demuxers).
* Otherwise all timestamps are in units of the stream selected by stream_index
* or if stream_index is -1, in AV_TIME_BASE units.
* If flags contain AVSEEK_FLAG_ANY, then non-keyframes are treated as
* keyframes (this may not be supported by all demuxers).
* If flags contain AVSEEK_FLAG_BACKWARD, it is ignored.
*
* @param s media file handle
* @param stream_index index of the stream which is used as time base reference
* @param min_ts smallest acceptable timestamp
* @param ts target timestamp
* @param max_ts largest acceptable timestamp
* @param flags flags
* @return >=0 on success, error code otherwise
*
* @note This is part of the new seek API which is still under construction.
* Thus do not use this yet. It may change at any time, do not expect
* ABI compatibility yet!
*)
function avformat_seek_file(s: PAVFormatContext; stream_index: cint; min_ts, ts, max_ts: cint64; flags: cint): cint;
cdecl; external av__format;
(**
* Start playing a network-based stream (e.g. RTSP stream) at the
* current position.
*)
function av_read_play(s: PAVFormatContext): cint;
cdecl; external av__format;
(**
* Pause a network-based stream (e.g. RTSP stream).
*
* Use av_read_play() to resume it.
*)
function av_read_pause(s: PAVFormatContext): cint;
cdecl; external av__format;
{$IFDEF FF_API_CLOSE_INPUT_FILE}
(**
* @deprecated use avformat_close_input()
* Close a media file (but not its codecs).
*
* @param s media file handle
*)
procedure av_close_input_file(s: PAVFormatContext);
cdecl; external av__format;
{$IFEND}
(**
* Close an opened input AVFormatContext. Free it and all its contents
* and set *s to NULL.
*)
procedure avformat_close_input(s: PPAVFormatContext);
cdecl; external av__format;
(**
* @}
*)
{$IFDEF FF_API_NEW_STREAM}
(**
* Add a new stream to a media file.
*
* Can only be called in the read_header() function. If the flag
* AVFMTCTX_NOHEADER is in the format context, then new streams
* can be added in read_packet too.
*
* @param s media file handle
* @param id file-format-dependent stream ID
*)
function av_new_stream(s: PAVFormatContext; id: cint): PAVStream;
cdecl; external av__format;
{$IFEND}
{$IFDEF FF_API_SET_PTS_INFO}
(**
* @deprecated this function is not supposed to be called outside of lavf
*)
procedure av_set_pts_info(s: PAVStream; pts_wrap_bits: cint;
pts_num: cuint; pts_den: cuint);
cdecl; external av__format;
{$IFEND}
const
AVSEEK_FLAG_BACKWARD = 1; ///< seek backward
AVSEEK_FLAG_BYTE = 2; ///< seeking based on position in bytes
AVSEEK_FLAG_ANY = 4; ///< seek to any frame, even non-keyframes
AVSEEK_FLAG_FRAME = 8;
(**
* @addtogroup lavf_encoding
* @{
*)
(**
* Allocate the stream private data and write the stream header to
* an output media file.
*
* @param s Media file handle, must be allocated with avformat_alloc_context().
* Its oformat field must be set to the desired output format;
* Its pb field must be set to an already opened AVIOContext.
* @param options An AVDictionary filled with AVFormatContext and muxer-private options.
* On return this parameter will be destroyed and replaced with a dict containing
* options that were not found. May be NULL.
*
* @return 0 on success, negative AVERROR on failure.
*
* @see av_opt_find, av_dict_set, avio_open, av_oformat_next.
*)
function avformat_write_header(s: PAVFormatContext; options: {PPAVDictionary} pointer): cint;
cdecl; external av__format;
(**
* Write a packet to an output media file.
*
* This function passes the packet directly to the muxer, without any buffering
* or reordering. The caller is responsible for correctly interleaving the
* packets if the format requires it. Callers that want libavformat to handle
* the interleaving should call av_interleaved_write_frame() instead of this
* function.
*
* @param s media file handle
* @param pkt The packet containing the data to be written. Note that unlike
* av_interleaved_write_frame(), this function does not take
* ownership of the packet passed to it (though some muxers may make
* an internal reference to the input packet).
* <br>
* This parameter can be NULL (at any time, not just at the end), in
* order to immediately flush data buffered within the muxer, for
* muxers that buffer up data internally before writing it to the
* output.
* <br>
* Packet's @ref AVPacket.stream_index "stream_index" field must be
* set to the index of the corresponding stream in @ref
* AVFormatContext.streams "s->streams". It is very strongly
* recommended that timing information (@ref AVPacket.pts "pts", @ref
* AVPacket.dts "dts", @ref AVPacket.duration "duration") is set to
* correct values.
* @return < 0 on error, = 0 if OK, 1 if flushed and there is no more data to flush
*
* @see av_interleaved_write_frame()
*)
function av_write_frame(s: PAVFormatContext; pkt: PAVPacket): cint;
cdecl; external av__format;
(**
* Write a packet to an output media file ensuring correct interleaving.
*
* This function will buffer the packets internally as needed to make sure the
* packets in the output file are properly interleaved in the order of
* increasing dts. Callers doing their own interleaving should call
* av_write_frame() instead of this function.
*
* @param s media file handle
* @param pkt The packet containing the data to be written.
* <br>
* If the packet is reference-counted, this function will take
* ownership of this reference and unreference it later when it sees
* fit.
* The caller must not access the data through this reference after
* this function returns. If the packet is not reference-counted,
* libavformat will make a copy.
* <br>
* This parameter can be NULL (at any time, not just at the end), to
* flush the interleaving queues.
* <br>
* Packet's @ref AVPacket.stream_index "stream_index" field must be
* set to the index of the corresponding stream in @ref
* AVFormatContext.streams "s->streams". It is very strongly
* recommended that timing information (@ref AVPacket.pts "pts", @ref
* AVPacket.dts "dts", @ref AVPacket.duration "duration") is set to
* correct values.
*
* @return 0 on success, a negative AVERROR on error. Libavformat will always
* take care of freeing the packet, even if this function fails.
*
* @see av_write_frame(), AVFormatContext.max_interleave_delta
*)
function av_interleaved_write_frame(s: PAVFormatContext; var pkt: TAVPacket): cint;
cdecl; external av__format;
(**
* Write a uncoded frame to an output media file.
*
* The frame must be correctly interleaved according to the container
* specification; if not, then av_interleaved_write_frame() must be used.
*
* See av_interleaved_write_frame() for details.
*)
function av_write_uncoded_frame(s: PAVFormatContext; stream_index: cint;
frame: PAVFrame): cint;
cdecl; external av__format;
(**
* Write a uncoded frame to an output media file.
*
* If the muxer supports it, this function allows to write an AVFrame
* structure directly, without encoding it into a packet.
* It is mostly useful for devices and similar special muxers that use raw
* video or PCM data and will not serialize it into a byte stream.
*
* To test whether it is possible to use it with a given muxer and stream,
* use av_write_uncoded_frame_query().
*
* The caller gives up ownership of the frame and must not access it
* afterwards.
*
* @return >=0 for success, a negative code on error
*)
function av_interleaved_write_uncoded_frame(s: PAVFormatContext; stream_index: cint;
frame: PAVFrame): cint;
cdecl; external av__format;
(**
* Test whether a muxer supports uncoded frame.
*
* @return >=0 if an uncoded frame can be written to that muxer and stream,
* <0 if not
*)
function av_write_uncoded_frame_query(s: PAVFormatContext; stream_index: cint): cint;
cdecl; external av__format;
(**
* Write the stream trailer to an output media file and free the
* file private data.
*
* May only be called after a successful call to avformat_write_header.
*
* @param s media file handle
* @return 0 if OK, AVERROR_xxx on error
*)
function av_write_trailer(s: pAVFormatContext): cint;
cdecl; external av__format;
(**
* Return the output format in the list of registered output formats
* which best matches the provided parameters, or return NULL if
* there is no match.
*
* @param short_name if non-NULL checks if short_name matches with the
* names of the registered formats
* @param filename if non-NULL checks if filename terminates with the
* extensions of the registered formats
* @param mime_type if non-NULL checks if mime_type matches with the
* MIME type of the registered formats
*)
function av_guess_format(short_name: PAnsiChar;
filename: PAnsiChar;
mime_type: PAnsiChar): PAVOutputFormat;
cdecl; external av__format;
(**
* Guess the codec ID based upon muxer and filename.
*)
function av_guess_codec(fmt: PAVOutputFormat; short_name: PAnsiChar;
filename: PAnsiChar; mime_type: PAnsiChar;
type_: TCodecType): TAVCodecID;
cdecl; external av__format;
(**
* Get timing information for the data currently output.
* The exact meaning of "currently output" depends on the format.
* It is mostly relevant for devices that have an internal buffer and/or
* work in real time.
* @param s media file handle
* @param stream stream in the media file
* @param[out] dts DTS of the last packet output for the stream, in stream
* time_base units
* @param[out] wall absolute time when that packet whas output,
* in microsecond
* @return 0 if OK, AVERROR(ENOSYS) if the format does not support it
* Note: some formats or devices may not allow to measure dts and wall
* atomically.
*)
function av_get_output_timestamp(s: PAVFormatContext; stream: cint;
dts: Pcint64; wall: Pcint64): cint;
cdecl; external av__format;
(**
* @}
*)
(**
* @defgroup lavf_misc Utility functions
* @ingroup libavf
* @{
*
* Miscellaneous utility functions related to both muxing and demuxing
* (or neither).
*)
(**
* Send a nice hexadecimal dump of a buffer to the specified file stream.
*
* @param f The file stream pointer where the dump should be sent to.
* @param buf buffer
* @param size buffer size
*
* @see av_hex_dump_log, av_pkt_dump2, av_pkt_dump_log2
*)
procedure av_hex_dump(f: PAVFile; buf: {const} PByteArray; size: cint); {<-?FILE}
cdecl; external av__format;
(**
* Send a nice hexadecimal dump of a buffer to the log.
*
* @param avcl A pointer to an arbitrary struct of which the first field is a
* pointer to an AVClass struct.
* @param level The importance level of the message, lower values signifying
* higher importance.
* @param buf buffer
* @param size buffer size
*
* @see av_hex_dump, av_pkt_dump, av_pkt_dump_log
*)
procedure av_hex_dump_log(avcl: Pointer; level: cint; buf: {const} PByteArray; size: cint);
cdecl; external av__format;
(**
* Send a nice dump of a packet to the specified file stream.
*
* @param f The file stream pointer where the dump should be sent to.
* @param pkt packet to dump
* @param dump_payload True if the payload must be displayed, too.
* @param st AVStream that the packet belongs to
*)
procedure av_pkt_dump2(f: PAVFile; pkt: PAVPacket; dump_payload: cint; st: PAVStream);
cdecl; external av__format;
(**
* Send a nice dump of a packet to the log.
*
* @param avcl A pointer to an arbitrary struct of which the first field is a
* pointer to an AVClass struct.
* @param level The importance level of the message, lower values signifying
* higher importance.
* @param pkt packet to dump
* @param dump_payload True if the payload must be displayed, too.
* @param st AVStream that the packet belongs to
*)
procedure av_pkt_dump_log2(avcl: pointer; level: cint; pkt: PAVPacket; dump_payload: cint;
st: PAVStream);
cdecl; external av__format;
(**
* Get the AVCodecID for the given codec tag tag.
* If no codec id is found returns AV_CODEC_ID_NONE.
*
* @param tags list of supported codec_id-codec_tag pairs, as stored
* in AVInputFormat.codec_tag and AVOutputFormat.codec_tag
* @param tag codec tag to match to a codec ID
*)
function av_codec_get_id(var tags: PAVCodecTag; tag: cuint): TAVCodecID;
cdecl; external av__format;
(**
* Getsthe codec tag for the given codec id id.
* If no codec tag is found returns 0.
*
* @param tags list of supported codec_id-codec_tag pairs, as stored
* in AVInputFormat.codec_tag and AVOutputFormat.codec_tag
* @param id codec ID to match to a codec tag
*)
function av_codec_get_tag(var tags: PAVCodecTag; id: TAVCodecID): cuint;
cdecl; external av__format;
(**
* Get the codec tag for the given codec id.
*
* @param tags list of supported codec_id - codec_tag pairs, as stored
* in AVInputFormat.codec_tag and AVOutputFormat.codec_tag
* @param id codec id that should be searched for in the list
* @param tag A pointer to the found tag
* @return 0 if id was not found in tags, > 0 if it was found
*)
function av_codec_get_tag2(var tags: PAVCodecTag; id: TAVCodecID;
tag: Pcuint): cint;
cdecl; external av__format;
function av_find_default_stream_index(s: PAVFormatContext): cint;
cdecl; external av__format;
(**
* Get the index for a specific timestamp.
*
* @param st stream that the timestamp belongs to
* @param timestamp timestamp to retrieve the index for
* @param flags if AVSEEK_FLAG_BACKWARD then the returned index will correspond
* to the timestamp which is <= the requested one, if backward
* is 0, then it will be >=
* if AVSEEK_FLAG_ANY seek to any frame, only keyframes otherwise
* @return < 0 if no such timestamp could be found
*)
function av_index_search_timestamp(st: PAVStream; timestamp: cint64; flags: cint): cint;
cdecl; external av__format;
(**
* Add an index entry into a sorted list. Update the entry if the list
* already contains it.
*
* @param timestamp timestamp in the timebase of the given stream
*)
function av_add_index_entry(st: PAVStream; pos: cint64; timestamp: cint64;
size: cint; distance: cint; flags: cint): cint;
cdecl; external av__format;
(**
* Split a URL string into components.
*
* The pointers to buffers for storing individual components may be null,
* in order to ignore that component. Buffers for components not found are
* set to empty strings. If the port is not found, it is set to a negative
* value.
*
* @param proto the buffer for the protocol
* @param proto_size the size of the proto buffer
* @param authorization the buffer for the authorization
* @param authorization_size the size of the authorization buffer
* @param hostname the buffer for the host name
* @param hostname_size the size of the hostname buffer
* @param port_ptr a pointer to store the port number in
* @param path the buffer for the path
* @param path_size the size of the path buffer
* @param url the URL to split
*)
procedure av_url_split(proto: PAnsiChar; proto_size: cint;
authorization: PAnsiChar; authorization_size: cint;
hostname: PAnsiChar; hostname_size: cint;
port_ptr: Pcint;
path: PAnsiChar; path_size: cint;
{const} url: PAnsiChar);
cdecl; external av__format;
procedure av_dump_format(ic: PAVFormatContext;
index: cint;
url: PAnsiChar;
is_output: cint);
cdecl; external av__format;
(**
* Return in 'buf' the path with '%d' replaced by a number.
*
* Also handles the '%0nd' format where 'n' is the total number
* of digits and '%%'.
*
* @param buf destination buffer
* @param buf_size destination buffer size
* @param path numbered sequence string
* @param number frame number
* @return 0 if OK, -1 on format error
*)
function av_get_frame_filename(buf: PAnsiChar; buf_size: cint;
path: PAnsiChar; number: cint): cint;
cdecl; external av__format;
(**
* Check whether filename actually is a numbered sequence generator.
*
* @param filename possible numbered sequence string
* @return 1 if a valid numbered sequence string, 0 otherwise
*)
function av_filename_number_test(filename: PAnsiChar): cint;
cdecl; external av__format;
(**
* Generate an SDP for an RTP session.
*
* Note, this overwrites the id values of AVStreams in the muxer contexts
* for getting unique dynamic payload types.
*
* @param ac array of AVFormatContexts describing the RTP streams. If the
* array is composed by only one context, such context can contain
* multiple AVStreams (one AVStream per RTP stream). Otherwise,
* all the contexts in the array (an AVCodecContext per RTP stream)
* must contain only one AVStream.
* @param n_files number of AVCodecContexts contained in ac
* @param buf buffer where the SDP will be stored (must be allocated by
* the caller)
* @param size the size of the buffer
* @return 0 if OK, AVERROR_xxx on error
*)
function av_sdp_create(ac: pointer; n_files: cint; buf: PAnsiChar; size: cint): cint;
cdecl; external av__format;
(**
* Return a positive value if the given filename has one of the given
* extensions, 0 otherwise.
*
* @param filename file name to check against the given extensions
* @param extensions a comma-separated list of filename extensions
*)
function av_match_ext(filename: {const} Pchar; extensions: {const} Pchar): cint;
cdecl; external av__format;
(**
* Test if the given container can store a codec.
*
* @param ofmt container to check for compatibility
* @param codec_id codec to potentially store in container
* @param std_compliance standards compliance level, one of FF_COMPLIANCE_*
*
* @return 1 if codec with ID codec_id can be stored in ofmt, 0 if it cannot.
* A negative number if this information is not available.
*)
function avformat_query_codec(ofmt: PAVOutputFormat; codec_id: TAVCodecID; std_compliance: cint): cint;
cdecl; external av__format;
(**
* @defgroup riff_fourcc RIFF FourCCs
* @{
* Get the tables mapping RIFF FourCCs to libavcodec AVCodecIDs. The tables are
* meant to be passed to av_codec_get_id()/av_codec_get_tag() as in the
* following code:
* @code
* uint32_t tag = MKTAG('H', '2', '6', '4');
* const struct AVCodecTag *table[] = { avformat_get_riff_video_tags(), 0 };
* enum AVCodecID id = av_codec_get_id(table, tag);
* @endcode
*)
(**
* @return the table mapping RIFF FourCCs for video to libavcodec AVCodecID.
*)
function avformat_get_riff_video_tags(): {const} PAVCodecTag;
cdecl; external av__format;
(**
* @return the table mapping RIFF FourCCs for audio to AVCodecID.
*)
function avformat_get_riff_audio_tags(): {const} PAVCodecTag;
cdecl; external av__format;
(**
* @return the table mapping MOV FourCCs for video to libavcodec AVCodecID.
*)
function avformat_get_mov_video_tags(): {const} PAVCodecTag;
(**
* @return the table mapping MOV FourCCs for audio to AVCodecID.
*)
function avformat_get_mov_audio_tags(): {const} PAVCodecTag;
(**
* Guess the sample aspect ratio of a frame, based on both the stream and the
* frame aspect ratio.
*
* Since the frame aspect ratio is set by the codec but the stream aspect ratio
* is set by the demuxer, these two may not be equal. This function tries to
* return the value that you should use if you would like to display the frame.
*
* Basic logic is to use the stream aspect ratio if it is set to something sane
* otherwise use the frame aspect ratio. This way a container setting, which is
* usually easy to modify can override the coded value in the frames.
*
* @param format the format context which the stream is part of
* @param stream the stream which the frame is part of
* @param frame the frame with the aspect ratio to be determined
* @return the guessed (valid) sample_aspect_ratio, 0/1 if no idea
*)
function av_guess_sample_aspect_ratio(format: PAVFormatContext; stream: PAVStream; frame: PAVFrame): TAVRational;
cdecl; external av__format;
(**
* Guess the frame rate, based on both the container and codec information.
*
* @param ctx the format context which the stream is part of
* @param stream the stream which the frame is part of
* @param frame the frame for which the frame rate should be determined, may be NULL
* @return the guessed (valid) frame rate, 0/1 if no idea
*)
function av_guess_frame_rate(ctx: PAVFormatContext; stream: PAVStream; frame: PAVFrame): TAVRational;
cdecl; external av__format;
(**
* Check if the stream st contained in s is matched by the stream specifier
* spec.
*
* See the "stream specifiers" chapter in the documentation for the syntax
* of spec.
*
* @return >0 if st is matched by spec;
* 0 if st is not matched by spec;
* AVERROR code if spec is invalid
*
* @note A stream specifier can match several streams in the format.
*)
function avformat_match_stream_specifier(s: PAVFormatContext; st: PAVStream;
spec: PAnsiChar): cint;
cdecl; external av__format;
function avformat_queue_attached_pictures(s: PAVFormatContext): cint;
cdecl; external av__format;
implementation
end.
