# -*- python -*-
# Copyright (C) 1998-2003 by the Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
"""Distributed default settings for significant Mailman config variables.
"""
# NEVER make site configuration changes to this file. ALWAYS make them in
# mm_cfg.py instead, in the designated area. See the comments in that file
# for details.
import os
def seconds(s): return s
def minutes(m): return m * 60
def hours(h): return h * 60 * 60
def days(d): return d * 60 * 60 * 24
#####
# General system-wide defaults
#####
# Should image logos be used? Set this to 0 to disable image logos from "our
# sponsors" and just use textual links instead (this will also disable the
# shortcut "favicon"). Otherwise, this should contain the URL base path to
# the logo images (and must contain the trailing slash).. If you want to
# disable Mailman's logo footer altogther, hack
# Mailman/htmlformat.py:MailmanLogo(), which also contains the hardcoded links
# and image names.
IMAGE_LOGOS = '/icons/'
# The name of the Mailman favicon
SHORTCUT_ICON = 'mm-icon.png'
# Don't change MAILMAN_URL, unless you want to point it at one of the mirrors.
MAILMAN_URL = 'http://www.gnu.org/software/mailman/index.html'
#MAILMAN_URL = 'http://www.list.org/'
#MAILMAN_URL = 'http://mailman.sf.net/'
# Mailman needs to know about (at least) two fully-qualified domain names
# (fqdn); 1) the hostname used in your urls, and 2) the hostname used in email
# addresses for your domain. For example, if people visit your Mailman system
# with "http://www.dom.ain/mailman" then your url fqdn is "www.dom.ain", and
# if people send mail to your system via "yourlist@dom.ain" then your email
# fqdn is "dom.ain". DEFAULT_URL_HOST controls the former, and
# DEFAULT_EMAIL_HOST controls the latter. Mailman also needs to know how to
# map from one to the other (this is especially important if you're running
# with virtual domains). You use "add_virtualhost(urlfqdn, emailfqdn)" to add
# new mappings.
#
# If you don't need to change DEFAULT_EMAIL_HOST and DEFAULT_URL_HOST in your
# mm_cfg.py, then you're done; the default mapping is added automatically. If
# however you change either variable in your mm_cfg.py, then be sure to also
# include the following:
#
# add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)
#
# because otherwise the default mappings won't be correct.
DEFAULT_EMAIL_HOST = '@MAILHOST@'
DEFAULT_URL_HOST = '@URLHOST@'
DEFAULT_URL_PATTERN = 'http://%s/mailman/'
# DEFAULT_HOST_NAME has been replaced with DEFAULT_EMAIL_HOST, however some
# sites may have the former in their mm_cfg.py files. If so, we'll believe
# that, otherwise we'll believe DEFAULT_EMAIL_HOST. Same for DEFAULT_URL.
DEFAULT_HOST_NAME = None
DEFAULT_URL = None
HOME_PAGE = 'index.html'
MAILMAN_SITE_LIST = 'mailman'
# Normally when a site administrator authenticates to a web page with the site
# password, they get a cookie which authorizes them as the list admin. It
# makes me nervous to hand out site auth cookies because if this cookie is
# cracked or intercepted, the intruder will have access to every list on the
# site. OTOH, it's dang handy to not have to re-authenticate to every list on
# the site. Set this value to 1 to allow site admin cookies.
ALLOW_SITE_ADMIN_COOKIES = 0
# Command that is used to convert text/html parts into plain text. This
# should output results to standard output. %(filename)s will contain the
# name of the temporary file that the program should operate on.
HTML_TO_PLAIN_TEXT_COMMAND = '/usr/bin/lynx -dump %(filename)s'
#####
# Virtual domains
#####
# Set up your virtual host mappings here. This is primarily used for the
# thru-the-web list creation, so its effects are currently fairly limited.
# Use add_virtualhost() call to add new mappings. The keys are strings as
# determined by Utils.get_domain(), the values are as appropriate for
# DEFAULT_HOST_NAME.
VIRTUAL_HOSTS = {}
# When set, the listinfo and admin overviews of lists on the machine will be
# confined to only those lists whose web_page_url configuration option host is
# included within the URL by which the page is visited - only those "on the
# virtual host". If unset, then all advertised (i.e. public) lists are
# included in the overview.
VIRTUAL_HOST_OVERVIEW = 1
# Helper function; use this in your mm_cfg.py files. If optional emailhost is
# omitted it defaults to urlhost with the first name stripped off, e.g.
#
# add_virtualhost('www.dom.ain')
# VIRTUAL_HOST['www.dom.ain']
# ==> 'dom.ain'
#
def add_virtualhost(urlhost, emailhost=None):
DOT = '.'
if emailhost is None:
emailhost = DOT.join(urlhost.split(DOT)[1:])
VIRTUAL_HOSTS[urlhost.lower()] = emailhost.lower()
# And set the default
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)
#####
# Spam avoidance defaults
#####
# This variable contains a list of 2-tuple of the format (header, regex) which
# the Mailman/Handlers/SpamDetect.py module uses to match against the current
# message. If the regex matches the given header in the current message, then
# it is flagged as spam. header is case-insensitive and should not include
# the trailing colon. regex is always matched with re.IGNORECASE.
#
# Note that the more searching done, the slower the whole process gets. Spam
# detection is run against all messages coming to either the list, or the
# -owners address, unless the message is explicitly approved.
KNOWN_SPAMMERS = []
#####
# Web UI defaults
#####
# Almost all the colors used in Mailman's web interface are parameterized via
# the following variables. This lets you easily change the color schemes for
# your preferences without having to do major surgery on the source code.
# Note that in general, the template colors are not included here since it is
# easy enough to override the default template colors via site-wide,
# vdomain-wide, or list-wide specializations.
WEB_BG_COLOR = 'white' # Page background
WEB_HEADER_COLOR = '#99ccff' # Major section headers
WEB_SUBHEADER_COLOR = '#fff0d0' # Minor section headers
WEB_ADMINITEM_COLOR = '#dddddd' # Option field background
WEB_ADMINPW_COLOR = '#99cccc' # Password box color
WEB_ERROR_COLOR = 'red' # Error message foreground
WEB_LINK_COLOR = '' # If true, forces LINK=
WEB_ALINK_COLOR = '' # If true, forces ALINK=
WEB_VLINK_COLOR = '' # If true, forces VLINK=
WEB_HIGHLIGHT_COLOR = '#dddddd' # If true, alternating rows
# in listinfo & admin display
#####
# Archive defaults
#####
# The url template for the public archives. This will be used in several
# places, including the List-Archive: header, links to the archive on the
# list's listinfo page, and on the list's admin page.
#
# This should be a string with "%(listname)s" somewhere in it. Mailman will
# interpolate the name of the list into this. You can also include a
# "%(hostname)s" in the string, into which Mailman will interpolate
# the host name (usually DEFAULT_URL_HOST).
PUBLIC_ARCHIVE_URL = 'http://%(hostname)s/pipermail/%(listname)s'
# Are archives on or off by default?
DEFAULT_ARCHIVE = 1 # 0=Off, 1=On
# Are archives public or private by default?
DEFAULT_ARCHIVE_PRIVATE = 0 # 0=public, 1=private
# ARCHIVE_TO_MBOX
#-1 - do not do any archiving
# 0 - do not archive to mbox, use builtin mailman html archiving only
# 1 - archive to mbox to use an external archiving mechanism only
# 2 - archive to both mbox and builtin mailman html archiving -
# use this to make both external archiving mechanism work and
# mailman's builtin html archiving. the flat mail file can be
# useful for searching, external archivers, etc.
#
ARCHIVE_TO_MBOX = 2
# 0 - yearly
# 1 - monthly
# 2 - quarterly
# 3 - weekly
# 4 - daily
DEFAULT_ARCHIVE_VOLUME_FREQUENCY = 1
DEFAULT_DIGEST_VOLUME_FREQUENCY = 1
# These variables control the use of an external archiver. Normally if
# archiving is turned on (see ARCHIVE_TO_MBOX above and the list's archive*
# attributes) the internal Pipermail archiver is used. This is the default if
# both of these variables are set to false. When either is set, the value
# should be a shell command string which will get passed to os.popen(). This
# string can contain %(listname)s for dictionary interpolation. The name of
# the list being archived will be substituted for this.
#
# Note that if you set one of these variables, you should set both of them
# (they can be the same string). This will mean your external archiver will
# be used regardless of whether public or private archives are selected.
PUBLIC_EXTERNAL_ARCHIVER = 0
PRIVATE_EXTERNAL_ARCHIVER = 0
# A filter module that converts from multipart messages to "flat" messages
# (i.e. containing a single payload). This is required for Pipermail, and you
# may want to set it to 0 for external archivers. You can also replace it
# with your own module as long as it contains a process() function that takes
# a MailList object and a Message object. It should raise
# Errors.DiscardMessage if it wants to throw the message away. Otherwise it
# should modify the Message object as necessary.
ARCHIVE_SCRUBBER = 'Mailman.Handlers.Scrubber'
# This variable defines what happens to text/html subparts. They can be
# stripped completely, escaped, or filtered through an external program. The
# legal values are:
# 0 - Strip out text/html parts completely, leaving a notice of the removal in
# the message. If the outer part is text/html, the entire message is
# discarded.
# 1 - Remove any embedded text/html parts, leaving them as HTML-escaped
# attachments which can be separately viewed. Outer text/html parts are
# simply HTML-escaped.
# 2 - Leave it inline, but HTML-escape it
# 3 - Remove text/html as attachments but don't HTML-escape them. Note: this
# is very dangerous because it essentially means anybody can send an HTML
# email to your site containing evil JavaScript or web bugs, or other
# nasty things, and folks viewing your archives will be susceptible. You
# should only consider this option if you do heavy moderation of your list
# postings.
#
# Note: given the current archiving code, it is not possible to leave
# text/html parts inline and un-escaped. I wouldn't think it'd be a good idea
# to do anyway.
#
# The value can also be a string, in which case it is the name of a command to
# filter the HTML page through. The resulting output is left in an attachment
# or as the entirety of the message when the outer part is text/html. The
# format of the string must include a "%(filename)s" which will contain the
# name of the temporary file that the program should operate on. It should
# write the processed message to stdout. Set this to
# HTML_TO_PLAIN_TEXT_COMMAND to specify an HTML to plain text conversion
# program.
ARCHIVE_HTML_SANITIZER = 1
# Set this to 1 to enable gzipping of the downloadable archive .txt file.
# Note that this is /extremely/ inefficient, so an alternative is to just
# collect the messages in the associated .txt file and run a cron job every
# night to generate the txt.gz file. See cron/nightly_gzip for details.
GZIP_ARCHIVE_TXT_FILES = 0
# This sets the default `clobber date' policy for the archiver. When a
# message is to be archived either by Pipermail or an external archiver,
# Mailman can modify the Date: header to be the date the message was received
# instead of the Date: in the original message. This is useful if you
# typically receive messages with outrageous dates. Set this to 0 to retain
# the date of the original message, or to 1 to always clobber the date. Set
# it to 2 to perform `smart overrides' on the date; when the date is outside
# ARCHIVER_ALLOWABLE_SANE_DATE_SKEW (either too early or too late), then the
# received date is substituted instead.
ARCHIVER_CLOBBER_DATE_POLICY = 2
ARCHIVER_ALLOWABLE_SANE_DATE_SKEW = days(15)
# Pipermail archives contain the raw email addresses of the posting authors.
# Some view this as a goldmine for spam harvesters. Set this to true to
# moderately obscure email addresses, but note that this breaks mailto: URLs
# in the archives too.
ARCHIVER_OBSCURES_EMAILADDRS = 1
# Pipermail assumes that messages bodies contain US-ASCII text.
# Change this option to define a different character set to be used as
# the default character set for the archive. The term "character set"
# is used in MIME to refer to a method of converting a sequence of
# octets into a sequence of characters. If you change the default
# charset, you might need to add it to VERBATIM_ENCODING below.
DEFAULT_CHARSET = None
# Most character set encodings require special HTML entity characters to be
# quoted, otherwise they won't look right in the Pipermail archives. However
# some character sets must not quote these characters so that they can be
# rendered properly in the browsers. The primary issue is multi-byte
# encodings where the octet 0x26 does not always represent the & character.
# This variable contains a list of such characters sets which are not
# HTML-quoted in the archives.
VERBATIM_ENCODING = ['iso-2022-jp']
#####
# Delivery defaults
#####
# Final delivery module for outgoing mail. This handler is used for message
# delivery to the list via the smtpd, and to an individual user. This value
# must be a string naming a module in the Mailman.Handlers package.
#
# WARNING: Sendmail has security holes and should be avoided. In fact, you
# must read the Mailman/Handlers/Sendmail.py file before it will work for
# you.
#
#DELIVERY_MODULE = 'Sendmail'
DELIVERY_MODULE = 'SMTPDirect'
# MTA should name a module in Mailman/MTA which provides the MTA specific
# functionality for creating and removing lists. Some MTAs like Exim can be
# configured to automatically recognize new lists, in which case the MTA
# variable should be set to None. Use 'Manual' to print new aliases to
# standard out (or send an email to the site list owner) for manual twiddling
# of an /etc/aliases style file. Use 'Postfix' if you are using the Postfix
# MTA -- but then also see POSTFIX_STYLE_VIRTUAL_DOMAINS.
MTA = 'Manual'
# If you set MTA='Postfix', then you also want to set the following variable,
# depending on whether you're using virtual domains in Postfix, and which
# style of virtual domain you're using. Set this flag to false if you're not
# using virtual domains in Postfix, or if you're using Sendmail-style virtual
# domains (where all addresses are visible in all domains). If you're using
# Postfix-style virtual domains, where aliases should only show up in the
# virtual domain, set this variable to the list of host_name values to write
# separate virtual entries for. I.e. if you run dom1.ain, dom2.ain, and
# dom3.ain, but only dom2 and dom3 are virtual, set this variable to the list
# ['dom2.ain', 'dom3.ain']. Matches are done against the host_name attribute
# of the mailing lists. See README.POSTFIX for details.
POSTFIX_STYLE_VIRTUAL_DOMAINS = []
# These variables describe the program to use for regenerating the aliases.db
# and virtual-mailman.db files, respectively, from the associated plain text
# files. The file being updated will be appended to this string (with a
# separating space), so it must be appropriate for os.system().
POSTFIX_ALIAS_CMD = '/usr/sbin/postalias'
POSTFIX_MAP_CMD = '/usr/sbin/postmap'
# Ceiling on the number of recipients that can be specified in a single SMTP
# transaction. Set to 0 to submit the entire recipient list in one
# transaction. Only used with the SMTPDirect DELIVERY_MODULE.
SMTP_MAX_RCPTS = 500
# Ceiling on the number of SMTP sessions to perform on a single socket
# connection. Some MTAs have limits. Set this to 0 to do as many as we like
# (i.e. your MTA has no limits). Set this to some number great than 0 and
# Mailman will close the SMTP connection and re-open it after this number of
# consecutive sessions.
SMTP_MAX_SESSIONS_PER_CONNECTION = 0
# Maximum number of simultaneous subthreads that will be used for SMTP
# delivery. After the recipients list is chunked according to SMTP_MAX_RCPTS,
# each chunk is handed off to the smptd by a separate such thread. If your
# Python interpreter was not built for threads, this feature is disabled. You
# can explicitly disable it in all cases by setting MAX_DELIVERY_THREADS to
# 0. This feature is only supported with the SMTPDirect DELIVERY_MODULE.
#
# NOTE: This is an experimental feature and limited testing shows that it may
# in fact degrade performance, possibly due to Python's global interpreter
# lock. Use with caution.
MAX_DELIVERY_THREADS = 0
# SMTP host and port, when DELIVERY_MODULE is 'SMTPDirect'. Make sure the
# host exists and is resolvable (i.e., if it's the default of "localhost" be
# sure there's a localhost entry in your /etc/hosts file!)
SMTPHOST = 'localhost'
SMTPPORT = 0 # default from smtplib
# Command for direct command pipe delivery to sendmail compatible program,
# when DELIVERY_MODULE is 'Sendmail'.
SENDMAIL_CMD = '/usr/lib/sendmail'
# Set these variables if you need to authenticate to your NNTP server for
# Usenet posting or reading. If no authentication is necessary, specify None
# for both variables.
NNTP_USERNAME = None
NNTP_PASSWORD = None
# Set this if you have an NNTP server you prefer gatewayed lists to use.
DEFAULT_NNTP_HOST = ''
# These variables controls how headers must be cleansed in order to be
# accepted by your NNTP server. Some servers like INN reject messages
# containing prohibited headers, or duplicate headers. The NNTP server may
# reject the message for other reasons, but there's little that can be
# programmatically done about that. See Mailman/Queue/NewsRunner.py
#
# First, these headers (case ignored) are removed from the original message.
NNTP_REMOVE_HEADERS = ['nntp-posting-host', 'nntp-posting-date', 'x-trace',
'x-complaints-to', 'xref', 'date-received', 'posted',
'posting-version', 'relay-version', 'received']
# Next, these headers are left alone, unless there are duplicates in the
# original message. Any second and subsequent headers are rewritten to the
# second named header (case preserved).
NNTP_REWRITE_DUPLICATE_HEADERS = [
('to', 'X-Original-To'),
('cc', 'X-Original-Cc'),
('content-transfer-encoding', 'X-Original-Content-Transfer-Encoding'),
('mime-version', 'X-MIME-Version'),
]
# All `normal' messages which are delivered to the entire list membership go
# through this pipeline of handler modules. Lists themselves can override the
# global pipeline by defining a `pipeline' attribute.
GLOBAL_PIPELINE = [
# These are the modules that do tasks common to all delivery paths.
'SpamDetect',
'Approve',
'Replybot',
'Moderate',
'Hold',
'MimeDel',
'Emergency',
'Tagger',
'CalcRecips',
'AvoidDuplicates',
'Cleanse',
'CookHeaders',
# And now we send the message to the digest mbox file, and to the arch and
# news queues. Runners will provide further processing of the message,
# specific to those delivery paths.
'ToDigest',
'ToArchive',
'ToUsenet',
# Now we'll do a few extra things specific to the member delivery
# (outgoing) path, finally leaving the message in the outgoing queue.
'AfterDelivery',
'Acknowledge',
'ToOutgoing',
]
# This is the pipeline which messages sent to the -owner address go through
OWNER_PIPELINE = [
'SpamDetect',
'Replybot',
'OwnerRecips',
'ToOutgoing',
]
# This defines syslog() format strings for the SMTPDirect delivery module (see
# DELIVERY_MODULE above). Valid %()s string substitutions include:
#
# time -- the time in float seconds that it took to complete the smtp
# hand-off of the message from Mailman to your smtpd.
#
# size -- the size of the entire message, in bytes
#
# #recips -- the number of actual recipients for this message.
#
# #refused -- the number of smtp refused recipients (use this only in
# SMTP_LOG_REFUSED).
#
# listname -- the `internal' name of the mailing list for this posting
#
# msg_<header> -- the value of the delivered message's given header. If
# the message had no such header, then "n/a" will be used. Note though
# that if the message had multiple such headers, then it is undefined
# which will be used.
#
# allmsg_<header> - Same as msg_<header> above, but if there are multiple
# such headers in the message, they will all be printed, separated by
# comma-space.
#
# sender -- the "sender" of the messages, which will be the From: or
# envelope-sender as determeined by the USE_ENVELOPE_SENDER variable
# below.
#
# The format of the entries is a 2-tuple with the first element naming the
# file in logs/ to print the message to, and the second being a format string
# appropriate for Python's %-style string interpolation. The file name is
# arbitrary; qfiles/<name> will be created automatically if it does not
# exist.
# The format of the message printed for every delivered message, regardless of
# whether the delivery was successful or not. Set to None to disable the
# printing of this log message.
SMTP_LOG_EVERY_MESSAGE = (
'smtp',
'%(msg_message-id)s smtp for %(#recips)d recips, completed in %(time).3f seconds')
# This will only be printed if there were no immediate smtp failures.
# Mutually exclusive with SMTP_LOG_REFUSED.
SMTP_LOG_SUCCESS = (
'post',
'post to %(listname)s from %(sender)s, size=%(size)d, success')
# This will only be printed if there were any addresses which encountered an
# immediate smtp failure. Mutually exclusive with SMTP_LOG_SUCCESS.
SMTP_LOG_REFUSED = (
'post',
'post to %(listname)s from %(sender)s, size=%(size)d, %(#refused)d failures')
# This will be logged for each specific recipient failure. Additional %()s
# keys are:
#
# recipient -- the failing recipient address
# failcode -- the smtp failure code
# failmsg -- the actual smtp message, if available
SMTP_LOG_EACH_FAILURE = (
'smtp-failure',
'delivery to %(recipient)s failed with code %(failcode)d: %(failmsg)s')
# These variables control the format and frequency of VERP-like delivery for
# better bounce detection. VERP is Variable Envelope Return Path, defined
# here:
#
# http://cr.yp.to/proto/verp.txt
#
# This involves encoding the address of the recipient as we (Mailman) know it
# into the envelope sender address (i.e. the SMTP `MAIL FROM:' address).
# Thus, no matter what kind of forwarding the recipient has in place, should
# it eventually bounce, we will receive an unambiguous notice of the bouncing
# address.
#
# However, we're technically only "VERP-like" because we're doing the envelope
# sender encoding in Mailman, not in the MTA. We do require cooperation from
# the MTA, so you must be sure your MTA can be configured for extended address
# semantics.
#
# The first variable describes how to encode VERP envelopes. It must contain
# these three string interpolations:
#
# %(bounces)s -- the list-bounces mailbox will be set here
# %(mailbox)s -- the recipient's mailbox will be set here
# %(host)s -- the recipient's host name will be set here
#
# This example uses the default below.
#
# FQDN list address is: mylist@dom.ain
# Recipient is: aperson@a.nother.dom
#
# The envelope sender will be mylist-bounces+aperson=a.nother.dom@dom.ain
#
# Note that your MTA /must/ be configured to deliver such an addressed message
# to mylist-bounces!
VERP_FORMAT = '%(bounces)s+%(mailbox)s=%(host)s'
# The second describes a regular expression to unambiguously decode such an
# address, which will be placed in the To: header of the bounce message by the
# bouncing MTA. Getting this right is critical -- and tricky. Learn your
# Python regular expressions. It must define exactly three named groups,
# bounces, mailbox and host, with the same definition as above. It will be
# compiled case-insensitively.
VERP_REGEXP = r'^(?P<bounces>[^+]+?)\+(?P<mailbox>[^=]+)=(?P<host>[^@]+)@.*$'
# A perfect opportunity for doing VERP is the password reminders, which are
# already addressed individually to each recipient. This flag, if true,
# enables VERPs on all password reminders.
VERP_PASSWORD_REMINDERS = 0
# Another good opportunity is when regular delivery is personalized. Here
# again, we're already incurring the performance hit for addressing each
# individual recipient. Set this to true to enable VERPs on all personalized
# regular deliveries (personalized digests aren't supported yet).
VERP_PERSONALIZED_DELIVERIES = 0
# And finally, we can VERP normal, non-personalized deliveries. However,
# because it can be a significant performance hit, we allow you to decide how
# often to VERP regular deliveries. This is the interval, in number of
# messages, to do a VERP recipient address. The same variable controls both
# regular and digest deliveries. Set to 0 to disable occasional VERPs, set to
# 1 to VERP every delivery, or to some number > 1 for only occasional VERPs.
VERP_DELIVERY_INTERVAL = 0
# For nicer confirmation emails, use a VERP-like format which encodes the
# confirmation cookie in the reply address. This lets us put a more user
# friendly Subject: on the message, but requires cooperation from the MTA.
# Format is like VERP_FORMAT above, but with the following substitutions:
#
# %(confirm)s -- the list-confirm mailbox will be set here
# %(cookie)s -- the confirmation cookie will be set here
VERP_CONFIRM_FORMAT = '%(addr)s+%(cookie)s'
# This is analogous to VERP_REGEXP, but for splitting apart the
# VERP_CONFIRM_FORMAT.
VERP_CONFIRM_REGEXP = r'^(?P<addr>[^+]+?)\+(?P<cookie>[^@]+)@.*$'
# Set this to true to enable VERP-like (more user friendly) confirmations
VERP_CONFIRMATIONS = 0
# This is the maximum number of automatic responses sent to an address because
# of -request messages or posting hold messages. This limit prevents response
# loops between Mailman and misconfigured remote email robots. Mailman
# already inhibits automatic replies to any message labeled with a header
# "Precendence: bulk|list|junk". This is a fallback safety valve so it should
# be set fairly high. Set to 0 for no limit (probably useful only for
# debugging).
MAX_AUTORESPONSES_PER_DAY = 10
#####
# Qrunner defaults
#####
# Which queues should the qrunner master watchdog spawn? This is a list of
# 2-tuples containing the name of the qrunner class (which must live in a
# module of the same name within the Mailman.Queue package), and the number of
# parallel processes to fork for each qrunner. If more than one process is
# used, each will take an equal subdivision of the hash space.
# BAW: Eventually we may support weighted hash spaces.
# BAW: Although not enforced, the # of slices must be a power of 2
QRUNNERS = [
('ArchRunner', 1), # messages for the archiver
('BounceRunner', 1), # for processing the qfile/bounces directory
('CommandRunner', 1), # commands and bounces from the outside world
('IncomingRunner', 1), # posts from the outside world
('NewsRunner', 1), # outgoing messages to the nntpd
('OutgoingRunner', 1), # outgoing messages to the smtpd
('VirginRunner', 1), # internally crafted (virgin birth) messages
]
# Set this to true to use the `Maildir' delivery option. If you change this
# you will need to re-run bin/genaliases for MTAs that don't use list
# auto-detection. Also, the line after USE_MAILDIR to your mm_cfg.py file.
#
# WARNING: If you want to use Maildir delivery, you /must/ start Mailman's
# qrunner as root, or you will get permission problems.
#
# NOTE: Maildir delivery is experimental for Mailman 2.1.
USE_MAILDIR = 0
# QRUNNERS.append(('MaildirRunner', 1))
# After processing every file in the qrunner's slice, how long should the
# runner sleep for before checking the queue directory again for new files?
# This can be a fraction of a second, or zero to check immediately
# (essentially busy-loop as fast as possible).
QRUNNER_SLEEP_TIME = seconds(1)
# When a message that is unparsable (by the email package) is received, what
# should we do with it? The most common cause of unparsable messages is
# broken MIME encapsulation, and the most common cause of that is viruses like
# Nimda. Set this variable to 0 to discard such messages, or to 1 to store
# them in qfiles/bad subdirectory.
QRUNNER_SAVE_BAD_MESSAGES = 1
#####
# General defaults
#####
# The default language for this server. Whenever we can't figure out the list
# context or user context, we'll fall back to using this language. See
# LC_DESCRIPTIONS below for legal values.
DEFAULT_SERVER_LANGUAGE = 'en'
# When allowing only members to post to a mailing list, how is the sender of
# the message determined? If this variable is set to 1, then first the
# message's envelope sender is used, with a fallback to the sender if there is
# no envelope sender. Set this variable to 0 to always use the sender.
#
# The envelope sender is set by the SMTP delivery and is thus less easily
# spoofed than the sender, which is typically just taken from the From: header
# and thus easily spoofed by the end-user. However, sometimes the envelope
# sender isn't set correctly and this will manifest itself by postings being
# held for approval even if they appear to come from a list member. If you
# are having this problem, set this variable to 0, but understand that some
# spoofed messages may get through.
USE_ENVELOPE_SENDER = 0
# Membership tests for posting purposes are usually performed by looking at a
# set of headers, passing the test if any of their values match a member of
# the list. Headers are checked in the order given in this variable. The
# value None means use the From_ (envelope sender) header. Field names are
# case insensitive.
SENDER_HEADERS = ('from', None, 'reply-to', 'sender')
# How many members to display at a time on the admin cgi to unsubscribe them
# or change their options?
DEFAULT_ADMIN_MEMBER_CHUNKSIZE = 30
# how many bytes of a held message post should be displayed in the admindb web
# page? Use a negative number to indicate the entire message, regardless of
# size (though this will slow down rendering those pages).
ADMINDB_PAGE_TEXT_LIMIT = 4096
# Set this variable to 1 to allow list owners to delete their own mailing
# lists. You may not want to give them this power, in which case, setting
# this variable to 0 instead requires list removal to be done by the site
# administrator, via the command line script bin/rmlist.
OWNERS_CAN_DELETE_THEIR_OWN_LISTS = 0
# Set this variable to 1 to allow list owners to set the "personalized" flags
# on their mailing lists. Turning these on tells Mailman to send separate
# email messages to each user instead of batching them together for delivery
# to the MTA. This gives each member a more personalized message, but can
# have a heavy impact on the performance of your system.
OWNERS_CAN_ENABLE_PERSONALIZATION = 0
# Should held messages be saved on disk as Python pickles or as plain text?
# The former is more efficient since we don't need to go through the
# parse/generate roundtrip each time, but the latter might be preferred if you
# want to edit the held message on disk.
HOLD_MESSAGES_AS_PICKLES = 1
# These define the available types of external message metadata formats, and
# the one to use by default. MARSHAL format uses Python's built-in marshal
# module. BSDDB_NATIVE uses the bsddb module compiled into Python, which
# links with whatever version of Berkeley db you've got on your system (in
# Python 2.0 this is included by default if configure can find it). ASCII
# format is a dumb repr()-based format with "key = value" Python assignments.
# It is human readable and editable (as Python source code) and is appropriate
# for execfile() food.
#
# Note! Make sure your queues are empty before you change this.
METAFMT_MARSHAL = 1
METAFMT_BSDDB_NATIVE = 2
METAFMT_ASCII = 3
METADATA_FORMAT = METAFMT_MARSHAL
# This variable controls the order in which list-specific category options are
# presented in the admin cgi page.
ADMIN_CATEGORIES = [
# First column
'general', 'passwords', 'language', 'members', 'nondigest', 'digest',
# Second column
'privacy', 'bounce', 'archive', 'gateway', 'autoreply',
'contentfilter', 'topics',
]
# See "Bitfield for user options" below; make this a sum of those options, to
# make all new members of lists start with those options flagged. We assume
# by default that people don't want to receive two copies of posts. Note
# however that the member moderation flag's initial value is controlled by the
# list's config variable default_member_moderation.
DEFAULT_NEW_MEMBER_OPTIONS = 256
#####
# List defaults
#####
# Should a list, by default be advertised? What is the default maximum number
# of explicit recipients allowed? What is the default maximum message size
# allowed?
DEFAULT_LIST_ADVERTISED = 1
DEFAULT_MAX_NUM_RECIPIENTS = 10
DEFAULT_MAX_MESSAGE_SIZE = 40 # KB
# These format strings will be expanded w.r.t. the dictionary for the
# mailing list instance.
DEFAULT_SUBJECT_PREFIX = "[%(real_name)s] "
DEFAULT_MSG_HEADER = ""
DEFAULT_MSG_FOOTER = """_______________________________________________
%(real_name)s mailing list
%(real_name)s@%(host_name)s
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
"""
# Mail command processor will ignore mail command lines after designated max.
DEFAULT_MAIL_COMMANDS_MAX_LINES = 25
# Is the list owner notified of admin requests immediately by mail, as well as
# by daily pending-request reminder?
DEFAULT_ADMIN_IMMED_NOTIFY = 1
# Is the list owner notified of subscribes/unsubscribes?
DEFAULT_ADMIN_NOTIFY_MCHANGES = 0
# Should list members, by default, have their posts be moderated?
DEFAULT_DEFAULT_MEMBER_MODERATION = 0
# Should non-member posts which are auto-discarded also be forwarded to the
# moderators?
DEFAULT_FORWARD_AUTO_DISCARDS = 1
# What shold happen to non-member posts which are do not match explicit
# non-member actions?
# 0 = Accept
# 1 = Hold
# 2 = Reject
# 3 = Discard
DEFAULT_GENERIC_NONMEMBER_ACTION = 1
# Bounce if 'To:', 'Cc:', or 'Resent-To:' fields don't explicitly name list?
# This is an anti-spam measure
DEFAULT_REQUIRE_EXPLICIT_DESTINATION = 1
# Alternate names acceptable as explicit destinations for this list.
DEFAULT_ACCEPTABLE_ALIASES ="""
"""
# For mailing lists that have only other mailing lists for members:
DEFAULT_UMBRELLA_LIST = 0
# For umbrella lists, the suffix for the account part of address for
# administrative notices (subscription confirmations, password reminders):
DEFAULT_UMBRELLA_MEMBER_ADMIN_SUFFIX = "-owner"
# This variable controls whether monthly password reminders are sent.
DEFAULT_SEND_REMINDERS = 1
# Send welcome messages to new users? Probably should keep this set to 1.
DEFAULT_SEND_WELCOME_MSG = 1
# Send goodbye messages to unsubscribed members? Probably should keep this
# set to 1.
DEFAULT_SEND_GOODBYE_MSG = 1
# Wipe sender information, and make it look like the list-admin
# address sends all messages
DEFAULT_ANONYMOUS_LIST = 0
# {header-name: regexp} spam filtering - we include some for example sake.
DEFAULT_BOUNCE_MATCHING_HEADERS = """
# Lines that *start* with a '#' are comments.
to: friend@public.com
message-id: relay.comanche.denmark.eu
from: list@listme.com
from: .*@uplinkpro.com
"""
# Mailman can be configured to "munge" Reply-To: headers for any passing
# messages. One the one hand, there are a lot of good reasons not to munge
# Reply-To: but on the other, people really seem to want this feature. See
# the help for reply_goes_to_list in the web UI for links discussing the
# issue.
# 0 - Reply-To: not munged
# 1 - Reply-To: set back to the list
# 2 - Reply-To: set to an explicit value (reply_to_address)
DEFAULT_REPLY_GOES_TO_LIST = 0
# Mailman can be configured to strip any existing Reply-To: header, or simply
# extend any existing Reply-To: with one based on the above setting. This is
# a boolean variable.
DEFAULT_FIRST_STRIP_REPLY_TO = 0
# SUBSCRIBE POLICY
# 0 - open list (only when ALLOW_OPEN_SUBSCRIBE is set to 1) **
# 1 - confirmation required for subscribes
# 2 - admin approval required for subscribes
# 3 - both confirmation and admin approval required
#
# ** please do not choose option 0 if you are not allowing open
# subscribes (next variable)
DEFAULT_SUBSCRIBE_POLICY = 1
# does this site allow completely unchecked subscriptions?
ALLOW_OPEN_SUBSCRIBE = 0
# The default policy for unsubscriptions. 0 (unmoderated unsubscribes) is
# highly recommended!
# 0 - unmoderated unsubscribes
# 1 - unsubscribes require approval
DEFAULT_UNSUBSCRIBE_POLICY = 0
# Private_roster == 0: anyone can see, 1: members only, 2: admin only.
DEFAULT_PRIVATE_ROSTER = 1
# When exposing members, make them unrecognizable as email addrs, so
# web-spiders can't pick up addrs for spam purposes.
DEFAULT_OBSCURE_ADDRESSES = 1
# RFC 2369 defines List-* headers which are added to every message sent
# through to the mailing list membership. These are a very useful aid to end
# users and should always be added. However, not all MUAs are compliant and
# if a list's membership has many such users, they may clamor for these
# headers to be suppressed. By setting this variable to 1, list owners will
# be given the option to suppress these headers. By setting it to 0, list
# owners will not be given the option to suppress these headers (although some
# header suppression may still take place, i.e. for announce-only lists, or
# lists with no archives).
ALLOW_RFC2369_OVERRIDES = 1
# Defaults for content filtering on mailing lists. DEFAULT_FILTER_CONTENT is
# a flag which if set to true, turns on content filtering.
DEFAULT_FILTER_CONTENT = 0
# DEFAULT_FILTER_MIME_TYPES is a list of MIME types to be removed. This is a
# list of strings of the format "maintype/subtype" or simply "maintype".
# E.g. "text/html" strips all html attachments while "image" strips all image
# types regardless of subtype (jpeg, gif, etc.).
DEFAULT_FILTER_MIME_TYPES = []
# DEFAULT_PASS_MIME_TYPES is a list of MIME types to be passed through. Format is the same as DEFAULT_FILTER_MIME_TYPES
DEFAULT_PASS_MIME_TYPES = ['multipart/mixed',
'multipart/alternative',
'text/plain']
# Whether text/html should be converted to text/plain after content filtering
# is performed. Conversion is done according to HTML_TO_PLAIN_TEXT_COMMAND
DEFAULT_CONVERT_HTML_TO_PLAINTEXT = 1
# Default action to take on filtered messages.
# 0 = Discard, 1 = Reject, 2 = Forward, 3 = Preserve
DEFAULT_FILTER_ACTION = 0
# Whether to allow list owners to preserve content filtered messages to a
# special queue on the disk.
OWNERS_CAN_PRESERVE_FILTERED_MESSAGES = 1
# Check for administrivia in messages sent to the main list?
DEFAULT_ADMINISTRIVIA = 1
#####
# Digestification defaults
#####
# Will list be available in non-digested form?
DEFAULT_NONDIGESTABLE = 1
# Will list be available in digested form?
DEFAULT_DIGESTABLE = 1
DEFAULT_DIGEST_HEADER = ""
DEFAULT_DIGEST_FOOTER = DEFAULT_MSG_FOOTER
DEFAULT_DIGEST_IS_DEFAULT = 0
DEFAULT_MIME_IS_DEFAULT_DIGEST = 0
DEFAULT_DIGEST_SIZE_THRESHHOLD = 30 # KB
DEFAULT_DIGEST_SEND_PERIODIC = 1
# Headers which should be kept in both RFC 1153 (plain) and MIME digests. RFC
# 1153 also specifies these headers in this exact order, so order matters.
MIME_DIGEST_KEEP_HEADERS = [
'Date', 'From', 'To', 'Cc', 'Subject', 'Message-ID', 'Keywords',
# I believe we should also keep these headers though.
'In-Reply-To', 'References', 'Content-Type', 'MIME-Version',
'Content-Transfer-Encoding', 'Precedence', 'Reply-To',
# Mailman 2.0 adds these headers
'Message',
]
PLAIN_DIGEST_KEEP_HEADERS = [
'Message', 'Date', 'From',
'Subject', 'To', 'Cc',
'Message-ID', 'Keywords',
'Content-Type',
]
#####
# Bounce processing defaults
#####
# Should we do any bounced mail response at all?
DEFAULT_BOUNCE_PROCESSING = 1
# Bounce processing works like this: when a bounce from a member is received,
# we look up the `bounce info' for this member. If there is no bounce info,
# this is the first bounce we've received from this member. In that case, we
# record today's date, and initialize the bounce score (see below for initial
# value).
#
# If there is existing bounce info for this member, we look at the last bounce
# receive date. If this date is farther away from today than the `bounce
# expiration interval', we throw away all the old data and initialize the
# bounce score as if this were the first bounce from the member.
#
# Otherwise, we increment the bounce score. If we can determine whether the
# bounce was soft or hard (i.e. transient or fatal), then we use a score value
# of 0.5 for soft bounces and 1.0 for hard bounces. Note that we only score
# one bounce per day. If the bounce score is then greater than the `bounce
# threshold' we disable the member's address.
#
# After disabling the address, we can send warning messages to the member,
# providing a confirmation cookie/url for them to use to re-enable their
# delivery. After a configurable period of time, we'll delete the address.
# When we delete the address due to bouncing, we'll send one last message to
# the member.
# Bounce scores greater than this value get disabled.
DEFAULT_BOUNCE_SCORE_THRESHOLD = 5.0
# Bounce information older than this interval is considered stale, and is
# discarded.
DEFAULT_BOUNCE_INFO_STALE_AFTER = days(7)
# The number of notifications to send to the disabled/removed member before we
# remove them from the list. A value of 0 means we remove the address
# immediately (with one last notification). Note that the first one is sent
# upon change of status to disabled.
DEFAULT_BOUNCE_YOU_ARE_DISABLED_WARNINGS = 3
# The interval of time between disabled warnings.
DEFAULT_BOUNCE_YOU_ARE_DISABLED_WARNINGS_INTERVAL = days(7)
# Does the list owner get messages to the -bounces (and -admin) address that
# failed to match by the bounce detector?
DEFAULT_BOUNCE_UNRECOGNIZED_GOES_TO_LIST_OWNER = 1
# Notifications on bounce actions. The first specifies whether the list owner
# should get a notification when a member is disabled due to bouncing, while
# the second specifies whether the owner should get one when the member is
# removed due to bouncing.
DEFAULT_BOUNCE_NOTIFY_OWNER_ON_DISABLE = 1
DEFAULT_BOUNCE_NOTIFY_OWNER_ON_REMOVAL = 1
#####
# General time limits
#####
# How long should subscriptions requests await confirmation before being
# dropped?
PENDING_REQUEST_LIFE = days(3)
# How long should messages which have delivery failures continue to be
# retried? After this period of time, a message that has failed recipients
# will be dequeued and those recipients will never receive the message.
DELIVERY_RETRY_PERIOD = days(5)
#####
# Lock management defaults
#####
# These variables control certain aspects of lock acquisition and retention.
# They should be tuned as appropriate for your environment. All variables are
# specified in units of floating point seconds. YOU MAY NEED TO TUNE THESE
# VARIABLES DEPENDING ON THE SIZE OF YOUR LISTS, THE PERFORMANCE OF YOUR
# HARDWARE, NETWORK AND GENERAL MAIL HANDLING CAPABILITIES, ETC.
# Set this to true to turn on MailList object lock debugging messages, which
# will be written to logs/locks. If you think you're having lock problems, or
# just want to tune the locks for your system, turn on lock debugging.
LIST_LOCK_DEBUGGING = 0
# This variable specifies how long the lock will be retained for a specific
# operation on a mailing list. Watch your logs/lock file and if you see a lot
# of lock breakages, you might need to bump this up. However if you set this
# too high, a faulty script (or incorrect use of bin/withlist) can prevent the
# list from being used until the lifetime expires. This is probably one of
# the most crucial tuning variables in the system.
LIST_LOCK_LIFETIME = hours(5)
# This variable specifies how long an attempt will be made to acquire a list
# lock by the incoming qrunner process. If the lock acquisition times out,
# the message will be re-queued for later delivery.
LIST_LOCK_TIMEOUT = seconds(10)
#####
# Nothing below here is user configurable. Most of these values are in this
# file for convenience. Don't change any of them or override any of them in
# your mm_cfg.py file!
#####
# These directories are used to find various important files in the Mailman
# installation. PREFIX and EXEC_PREFIX are set by configure and should point
# to the installation directory of the Mailman package.
PYTHON = '@PYTHON@'
PREFIX = '@prefix@'
EXEC_PREFIX = '@exec_prefix@'
VAR_PREFIX = '@VAR_PREFIX@'
# Work around a bogus autoconf 2.12 bug
if EXEC_PREFIX == '${prefix}':
EXEC_PREFIX = PREFIX
# CGI extension, change using configure script
CGIEXT = '@CGIEXT@'
# Group id that group-owns the Mailman installation
MAILMAN_USER = '@MAILMAN_USER@'
MAILMAN_GROUP = '@MAILMAN_GROUP@'
# Enumeration for Mailman cgi widget types
Toggle = 1
Radio = 2
String = 3
Text = 4
Email = 5
EmailList = 6
Host = 7
Number = 8
FileUpload = 9
Select = 10
Topics = 11
Checkbox = 12
# An "extended email list". Contents must be an email address or a ^-prefixed
# regular expression. Used in the sender moderation text boxes.
EmailListEx = 13
# Held message disposition actions, for use between admindb.py and
# ListAdmin.py.
DEFER = 0
APPROVE = 1
REJECT = 2
DISCARD = 3
SUBSCRIBE = 4
UNSUBSCRIBE = 5
ACCEPT = 6
HOLD = 7
# Standard text field width
TEXTFIELDWIDTH = 40
# Bitfield for user options. See DEFAULT_NEW_MEMBER_OPTIONS above to set
# defaults for all new lists.
Digests = 0 # handled by other mechanism, doesn't need a flag.
DisableDelivery = 1 # Obsolete; use set/getDeliveryStatus()
DontReceiveOwnPosts = 2 # Non-digesters only
AcknowledgePosts = 4
DisableMime = 8 # Digesters only
ConcealSubscription = 16
SuppressPasswordReminder = 32
ReceiveNonmatchingTopics = 64
Moderate = 128
DontReceiveDuplicates = 256
# A mapping between short option tags and their flag
OPTINFO = {'hide' : ConcealSubscription,
'nomail' : DisableDelivery,
'ack' : AcknowledgePosts,
'notmetoo': DontReceiveOwnPosts,
'digest' : 0,
'plain' : DisableMime,
'nodupes' : DontReceiveDuplicates
}
# Authentication contexts.
#
# Mailman defines the following roles:
# - User, a normal user who has no permissions except to change their personal
# option settings
# - List creator, someone who can create and delete lists, but cannot
# (necessarily) configure the list.
# - List moderator, someone who can tend to pending requests such as
# subscription requests, or held messages
# - List administrator, someone who has total control over a list, can
# configure it, modify user options for members of the list, subscribe and
# unsubscribe members, etc.
# - Site administrator, someone who has total control over the entire site and
# can do any of the tasks mentioned above. This person usually also has
# command line access.
UnAuthorized = 0
AuthUser = 1 # Joe Shmoe User
AuthCreator = 2 # List Creator / Destroyer
AuthListAdmin = 3 # List Administrator (total control over list)
AuthListModerator = 4 # List Moderator (can only handle held requests)
AuthSiteAdmin = 5 # Site Administrator (total control over everything)
# Useful directories
LIST_DATA_DIR = os.path.join(VAR_PREFIX, 'lists')
LOG_DIR = os.path.join(VAR_PREFIX, 'logs')
LOCK_DIR = os.path.join(VAR_PREFIX, 'locks')
DATA_DIR = os.path.join(VAR_PREFIX, 'data')
SPAM_DIR = os.path.join(VAR_PREFIX, 'spam')
WRAPPER_DIR = os.path.join(EXEC_PREFIX, 'mail')
BIN_DIR = os.path.join(PREFIX, 'bin')
SCRIPTS_DIR = os.path.join(PREFIX, 'scripts')
TEMPLATE_DIR = os.path.join(PREFIX, 'templates')
MESSAGES_DIR = os.path.join(PREFIX, 'messages')
PUBLIC_ARCHIVE_FILE_DIR = os.path.join(VAR_PREFIX, 'archives', 'public')
PRIVATE_ARCHIVE_FILE_DIR = os.path.join(VAR_PREFIX, 'archives', 'private')
# Directories used by the qrunner subsystem
QUEUE_DIR = os.path.join(VAR_PREFIX, 'qfiles')
INQUEUE_DIR = os.path.join(QUEUE_DIR, 'in')
OUTQUEUE_DIR = os.path.join(QUEUE_DIR, 'out')
CMDQUEUE_DIR = os.path.join(QUEUE_DIR, 'commands')
BOUNCEQUEUE_DIR = os.path.join(QUEUE_DIR, 'bounces')
NEWSQUEUE_DIR = os.path.join(QUEUE_DIR, 'news')
ARCHQUEUE_DIR = os.path.join(QUEUE_DIR, 'archive')
SHUNTQUEUE_DIR = os.path.join(QUEUE_DIR, 'shunt')
VIRGINQUEUE_DIR = os.path.join(QUEUE_DIR, 'virgin')
BADQUEUE_DIR = os.path.join(QUEUE_DIR, 'bad')
MAILDIR_DIR = os.path.join(QUEUE_DIR, 'maildir')
# Other useful files
PIDFILE = os.path.join(DATA_DIR, 'master-qrunner.pid')
SITE_PW_FILE = os.path.join(DATA_DIR, 'adm.pw')
LISTCREATOR_PW_FILE = os.path.join(DATA_DIR, 'creator.pw')
# Import a bunch of version numbers
from Version import *
# Vgg: Language descriptions and charsets dictionary, any new supported
# language must have a corresponding entry here. Key is the name of the
# directories that hold the localized texts. Data are tuples with first
# element being the description, as described in the catalogs, and second
# element is the language charset. I have chosen code from /usr/share/locale
# in my GNU/Linux. :-)
def _(s):
return s
LC_DESCRIPTIONS = {}
def add_language(code, description, charset):
LC_DESCRIPTIONS[code] = (description, charset)
add_language('big5', _('Traditional Chinese'), 'big5')
add_language('cs', _('Czech'), 'iso-8859-2')
add_language('de', _('German'), 'iso-8859-1')
add_language('en', _('English (USA)'), 'us-ascii')
add_language('es', _('Spanish (Spain)'), 'iso-8859-1')
add_language('et', _('Estonian'), 'iso-8859-15')
add_language('fi', _('Finnish'), 'iso-8859-1')
add_language('fr', _('French'), 'iso-8859-1')
add_language('gb', _('Simplified Chinese'), 'gb2312')
add_language('hu', _('Hungarian'), 'iso-8859-2')
add_language('it', _('Italian'), 'iso-8859-1')
add_language('ja', _('Japanese'), 'euc-jp')
add_language('ko', _('Korean'), 'euc-kr')
add_language('lt', _('Lithuanian'), 'iso-8859-13')
add_language('nl', _('Dutch'), 'iso-8859-1')
add_language('no', _('Norwegian'), 'iso-8859-1')
add_language('pt_BR', _('Portuguese (Brazil)'), 'iso-8859-1')
add_language('ru', _('Russian'), 'koi8-r')
add_language('sv', _('Swedish'), 'iso-8859-1')
del _
