#+PROPERTY: header-args :comments link :tangle yes :noweb no-export :results silent
#+STARTUP: overview
* About this file
This is my main emacs init file. It can be loaded by the init.el with
org-babel or can be tangled and compiled to =main.elc= and loaded
directly.
If you're viewing this file in an org-mode buffer, you can open source
code blocks (those are the ones in begin_src) in a separate buffer by
moving your point inside them and typing C-c '
(org-edit-special). This opens another buffer in emacs-lisp-mode, so
you can use M-x eval-buffer to load the changes.
* Personal information
#+begin_src emacs-lisp
(setq user-full-name "Alexander Sulfrian"
user-mail-address "alexander@sulfrian.net")
#+end_src
* Initialization
** packages
Add some more package repositories.
#+begin_src emacs-lisp
(nconc package-archives
'(("melpa-stable" . "http://stable.melpa.org/packages/")
("melpa" . "http://melpa.org/packages/")
("org" . "http://orgmode.org/elpa/")
("marmalade" . "http://marmalade-repo.org/packages/")))
#+end_src
By default the package system is initialized after evaluating the
user-init-file (this file) and I could not customize packages in this
file. So I initialize the package system right here and disable the
automatic initialization.
#+begin_src emacs-lisp
(setq package-enable-at-startup nil
package-user-dir (locate-user-emacs-file "cache/elpa/"))
(package-initialize nil)
#+end_src
** use-package
I require use-package to simplify the configuration. This is a
requirement for this configuration, so I install it here.
#+begin_src emacs-lisp
(eval-when-compile
(unless (package-installed-p 'use-package)
(package-install 'use-package))
(setq use-package-verbose t)
(require 'use-package))
#+end_src
** auto-compile
For faster start-up times, this init file should be compiled into
byte code. I use auto-compile mode for this. It will recompile files
on load if the byte compiled file exists but is outdated.
#+begin_src emacs-lisp
(use-package auto-compile
:ensure t
:config (auto-compile-on-load-mode))
#+end_src
For safety reasons emacs should prefer the newer file, if the =*.el=
and =*.elc= file exists.
#+begin_src emacs-lisp
(setq load-prefer-newer t)
#+end_src
** dash
#+begin_src emacs-lisp
(use-package dash
:demand t
:ensure t)
#+end_src emacs-lisp
* General Setup
** Encoding
Set all the encoding stuff to utf-8 (but to latin-1 on ZEDAT hosts).
#+begin_src emacs-lisp
(let ((encoding
(if (string-match "\\.zedat.fu-berlin.de\\'" system-name)
'latin-1
'utf-8)))
(setq locale-coding-system encoding)
(set-terminal-coding-system encoding)
(set-keyboard-coding-system encoding)
(set-selection-coding-system encoding)
(prefer-coding-system encoding))
#+end_src
** Customizing
Emacs should not edit the init.el file when saving stuff from
customize. So I set a separate custom-file and load it.
#+begin_src emacs-lisp
(setq custom-file "~/.emacs.d/emacs-custom.el")
(load custom-file)
#+end_src
** Helper for configuration
I need some functions to simplify the configuration below. They are
defined here.
*** Get buffers with specific minor-mode
Simply get a list of all buffers, where the specified minor-mode is
active.
#+begin_src emacs-lisp
(defun alex/get-buffers-with (mode)
"Get a list of buffers where the given MODE is active. It is done by
evaluating the given symbol in all buffers and return a list with
all buffers where it evaluates to t. So actually MODE could be any
buffer-local variable."
(let ((state (mapcar (lambda (buf)
(with-current-buffer buf
(when (and (boundp mode)
(symbol-value mode))
buf)))
(buffer-list))))
(delq nil state)))
#+end_src
*** Ignore errors of a function
This macro first tries to execute the given fun and evaluate the body
afterwards, even if fun raised an error. After evaluation of body the
original return value (or error) of fun is returned.
This is useful for around advices, that should be reset something
after calling the adviced function, even if it raises an error.
#+begin_src emacs-lisp
(defmacro alex/safe-call (fun &rest body)
"Evaluate FUN and catch all errors, evaluates BODY afterwards
(regardless whether an error was raised or not) and finally returns
the result of FUN captured earlier or re-throw the error."
`(let* ((tmp (condition-case err
(list (,@fun) nil)
(error (list nil err))))
(err (cadr tmp))
(result (car tmp)))
,@body
(when err
(signal (car err) (cdr err)))
result))
#+end_src
*** Get next element from list
This lisp function returns the next element from a list. It is useful
if you want to switch a setting between multiple values.
#+begin_src emacs-lisp
(defun alex/get-next (old list)
"Returns the element after OLD in LIST or the first element if OLD
is the last element or is not in LIST."
(let ((index (or (cl-position old list) -1))
(len (length list)))
(nth (% (+ 1 index) len) list)))
#+end_src
*** Exclude list for globalized minor-modes
I want to define some global-minor-modes, but keep them disabled in
certain modes, buffers or in the minibuffer. So I declare some helper
to define exclude lists for custom global-minor-modes.
#+begin_src emacs-lisp
(defun alex/parse-exclude-list (exclude-list)
"Convert a free from exlude list (with multiple keywords) in a
propper assoc list with the keywords as key and the values in
between as values."
(let ((keyword nil)
(res '())
(args '()))
(dolist (elem exclude-list)
(if (keywordp elem)
(progn
(when keyword (setq res (nconc res (list keyword (or args 'empty)))))
(setq keyword elem
args '()))
(setq args (nconc args (list elem)))))
(nconc res (list keyword (or args 'empty)))))
(defmacro alex/check-list (list var &rest body)
"Simple macro to check if body returns non-nil for any element in
the list."
`(if (eq ,list 'empty)
nil
(delq nil (mapcar
(lambda (,var)
,@body)
,list))))
(defun alex/safe-get-value (var)
"Get the value of the variable of nil if the given variable does not exists."
(if (boundp var)
(symbol-value var)
nil))
(defun alex/minor-mode-exclude (mode)
"Check the exclude list for the given mode. Returns t if the mode
should be excluded, else nil."
(let* ((exclude-list (intern (concat (symbol-name mode) "-exclude-list")))
(excludes (alex/parse-exclude-list (symbol-value exclude-list))))
(cond
((and (plist-get excludes :minibuffer) (minibufferp))
t)
((alex/check-list (plist-get excludes :mode) mode
(cond ((derived-mode-p mode) t)
((alex/safe-get-value mode) t)))
t)
((alex/check-list (plist-get excludes :buffer) buf
(cond
((and (symbolp buf) (eq (current-buffer)
(alex/safe-get-value buf)))
t)
((and buf (eq (current-buffer) buf))
t)))
t)
(t nil))))
#+end_src
Last I define a macro for defining a globalized minor-mode with the
exclude list feature.
#+begin_src emacs-lisp
(defmacro alex/global-excluding-minor-mode (global mode &rest body)
"Define a global-minor-mode that can be disabled on some modes or
buffers. BODY is executed each time when the mode should be
activated (it passed the exclude list at this position). If BODY
is empty the mode will be simply activated."
(if `(not ,body)
`(define-globalized-minor-mode ,global ,mode
(lambda ()
(unless (alex/minor-mode-exclude ',mode)
(,mode 1))))
`(define-globalized-minor-mode ,global ,mode
(lambda ()
(unless (alex/minor-mode-exclude ',mode)
,@body)))))
(defmacro alex/minor-mode-exclude-list (mode)
`(defvar ,(intern (concat (symbol-name mode) "-exclude-list"))
()
(concat "Exclude list for " (symbol-name ',mode) ". "
"Can contain :minibuffer, :modeq and :buffer.")))
(defun alex/build-global-name (mode)
"Build the symbol for the global mode by inserting 'global-' after
'alex/' or prepending 'alex/gloabl-' if MODE does not start with the
personal prefix."
(let ((name (symbol-name mode)))
(intern
(if (string-match "^alex/" name)
(replace-regexp-in-string "^alex/" "\\&global-" name)
(concat "alex/global-" name)))))
(defun alex/define-global-excluding-minor-mode (mode &rest body)
(let ((global (alex/build-global-name mode)))
(eval `(alex/global-excluding-minor-mode ,global ,mode ,body))
(eval `(alex/minor-mode-exclude-list ,mode))))
#+end_src
** Cache directory
I want to keep all the changing files in one place, so I create
=~/.emacs.d/cache/= for this purpose.
#+begin_src emacs-lisp
(let ((cache (locate-user-emacs-file "cache/")))
(unless (file-directory-p cache)
(make-directory cache)))
#+end_src
Additionally I define a helper function to create a file name inside
this cache directory.
#+begin_src emacs-lisp
(defun alex/cache-file (filename)
(locate-user-emacs-file (concat "cache/" filename)))
#+end_src
*** recentf
Save the history of the last 1000 visited files.
#+begin_src emacs-lisp
(setq recentf-save-file (alex/cache-file "recentf")
recentf-max-saved-items 1000)
(recentf-mode 1)
#+end_src
*** save-place
Save the last position in a file and raise the limit to 10k elements.
#+begin_src emacs-lisp
(use-package saveplace
:config
(setq save-place-file (alex/cache-file "saveplace")
save-place-limit 10000)
(setq-default save-place t))
#+end_src
*** savehist
Save a lot of history between emacs restarts. Save everything, but do
not keep duplicates.
#+begin_src emacs-lisp
(setq savehist-file (alex/cache-file "savehist")
history-length t
history-delete-duplicates t
savehist-save-minibuffer-history t
savehist-additional-variables '(kill-ring
search-ring
regexp-search-ring))
#+end_src
Enable the =savehist-mode=. This has to be below the configuration,
because the history is loaded when this mode is activated the first
time. So the =savehist-file= has to be configured when activating.
#+begin_src emacs-lisp
(savehist-mode 1)
#+end_src
*** bookmarks
Bookmarks are great to remember various positions in files. Save the
bookmark file every time I make a modification (so that I do not loose
a change, even if emacs or my laptop crashes).
#+begin_src emacs-lisp
(setq bookmark-default-file (alex/cache-file "bookmarks")
bookmark-save-flag 1)
#+end_src
*** backups
Do not save backup files into the directory of the original file.
#+begin_src emacs-lisp
(setq backup-directory-alist '(("." . "~/.emacs.d/backups")))
#+end_src
Do not delete old backup files.
#+begin_src emacs-lisp
(setq delete-old-versions -1
version-control t)
#+end_src
Make backups even for files under version control.
#+begin_src emacs-lisp
(setq vc-make-backup-files t)
#+end_src
*** auto-save
Do not save auto-save files into the directory of the original
file (especially important for editing files via tramp).
#+begin_src emacs-lisp
(setq auto-save-file-name-transforms `((".*" ,(alex/cache-file "auto-save-list/") t))
auto-save-list-file-prefix (alex/cache-file "auto-save-list/.saves-"))
#+end_src
** Remove some annoyances
*** No startup message
#+begin_src emacs-lisp
(setq inhibit-startup-message t)
#+end_src
*** Newline at end of file
Require a newline at end of file, but do not insert newlines
automatically just by moving the cursor down.
#+begin_src emacs-lisp
(setq require-final-newline t
next-line-add-newlines nil)
#+end_src
*** Yes or No
I do not want to have to type =yes= and =no=. =y= or =n= should be
sufficient.
#+begin_src emacs-lisp
(fset 'yes-or-no-p 'y-or-n-p)
#+end_src
*** Symbolic links and version control
Visit the real file (without question), if editing a symbolic links
that points to a file under version control.
#+begin_src emacs-lisp
(setq vc-follow-symlinks t)
#+end_src
** Visual
*** Window configuration
Clean up the UI. No toolbar, but use scrollbars and tooltips to keep
the minibuffer clean.
#+begin_src emacs-lisp
(tool-bar-mode -1)
(tooltip-mode 1)
(scroll-bar-mode 1)
#+end_src
Use extremely small scroll-bars on the right.
#+begin_src emacs-lisp
(set-scroll-bar-mode 'right)
(set-frame-parameter nil 'scroll-bar-width 10)
(nconc default-frame-alist '((scroll-bar-width . 10)))
#+end_src
The menu-bar is helpful in the terminal (under X you can get a menu on
demand with <F10>). So I enable the menu-bar if no window-system is
available. To show the menu also in an emacsclient in the terminal, I
have to add a hook in the =after-make-frame-function=.
#+begin_src emacs-lisp
(defun alex/update-menu-bar (&optional frame)
"This displays the menu bar if the given FRAME (default: selected
frame) is in a terminal"
(let ((status (if (display-graphic-p frame) 0 1)))
(set-frame-parameter frame 'menu-bar-lines status)))
(alex/update-menu-bar)
(add-hook 'after-make-frame-functions 'alex/update-menu-bar)
#+end_src
*** Color-theme
Use own color theme and switch it depending whether the frame is on
terminal or under X11.
#+begin_src emacs-lisp
(use-package color-theme
:demand t
:config
(setq color-theme-directory "~/.emacs.d/lisp/themes/"
color-theme-load-all-themes nil)
(color-theme-initialize)
(color-theme-monokai-alex)
(defun alex/update-color-theme (&optional frame)
(let ((color-theme-is-global nil))
(if (display-graphic-p frame)
(color-theme-monokai-alex)
(color-theme-alex-console))))
(add-hook 'after-make-frame-functions 'alex/update-color-theme))
#+end_src
I always want to have as much as possible syntax highlighting.
#+begin_src emacs-lisp
(global-font-lock-mode t)
(setq font-lock-maximum-decoration t)
#+end_src
*** Cleanup minor-modes in modeline
I want to hide some minor-modes, if they are activated in nearly all
buffers or it is irrelevant if they are activated.
To be compatible with powerline I use rich-minority, but I add some
custom stuff to fake the interface of diminish so that I can use the
diminish feature of use-package.
I can use :diminish in use-package with either a mode name or e regexp
to hide matching modes.
#+begin_src emacs-lisp
(use-package rich-minority
:ensure t
:config
(defvar alex/minor-mode-blacklist ()
"List of regexp that is matched against the lighter of all
minor-modes. All matching minor-modes are hidden in the mode line.")
(defun alex/rm-add-blacklist (regexp)
"Add the given REGEXP to alex/minor-modes-blacklist and updates the
combined regexp in rm-blacklist afterwards."
(unless (member regexp alex/minor-mode-blacklist)
(setq alex/minor-mode-blacklist
(nconc alex/minor-mode-blacklist (list regexp)))
(alex/update-rm-blacklist))
alex/minor-mode-blacklist)
(defun alex/update-rm-blacklist ()
"Update rm-blacklist and build a regexp from the multiple values in
alex/minor-modes-blacklist."
(setq rm-blacklist
(format "^\\(%s\\)$"
(mapconcat #'identity alex/minor-mode-blacklist "\\|"))))
(defun alex/get-lighter (mode)
"Get the lighter for the given minor-mode."
(let ((value (assoc mode minor-mode-alist)))
(if value
(let ((lighter (cadr value)))
(if (symbolp lighter)
(when (boundp lighter)
(eval lighter))
lighter))
nil)))
(defun diminish (mode &optional regexp)
"This is a fake diminish with rich-minority-mode. It accepts uses
either the MODE or if given the REGEXP to hide the mode."
(if (and regexp (> (length regexp) 0))
(alex/rm-add-blacklist regexp)
(let ((lighter (alex/get-lighter mode)))
(when lighter
(alex/rm-add-blacklist lighter)))))
(rich-minority-mode 1))
#+end_src
*** Trailing whitespaces
I generally want to show trailing whitespaces, but there are several
exceptions. Per default there is only a buffer local variable to
control this feature. I create a simple minor-mode, so that I could
simply activate or deactivate this feature.
#+begin_src emacs-lisp
(define-minor-mode alex/tw-mode
"trailing-whitespace-mode"
:lighter " TW"
(setq show-trailing-whitespace alex/tw-mode))
(alex/define-global-excluding-minor-mode 'alex/tw-mode)
#+end_src
I want to disable trailing whitespaces in the minibuffer, in weechat,
helm and term-mode and in the which-key buffer. So I define here the
exclude list.
#+begin_src emacs-lisp
(setq alex/tw-mode-exclude-list
'(:minibuffer
:mode
helm--remap-mouse-mode
weechat-mode
term-mode
Custom-mode
:buffer
which-key--buffer))
#+end_src
And now activate the new global mode and hide it from the mode line.
#+begin_src emacs-lisp
(alex/global-tw-mode t)
(diminish 'alex/tw-mode)
#+end_src
*** Visual-wrap-column
Sometimes I want to force =visual-line-wrap= at a specific column (in
contrast to the window width). This is especially useful for emails,
that are badly formatted with long lines. =visual-line-wrap= will
split long lines at the word-break before the specified column.
#+begin_src emacs-lisp
(defvar alex/visual-wrap-column nil
"Column to force visual line wrap. Use `alex/set-visual-wrap-column'
to change the value.")
(defun alex/set-visual-wrap-column (new-wrap-column &optional buffer)
"Force visual line wrap at NEW-WRAP-COLUMN in BUFFER (defaults to
current buffer) by setting the right-hand margin on every window that
displays BUFFER. A value of NIL or 0 for NEW-WRAP-COLUMN disables this
behavior."
(interactive (list (read-number "New visual wrap column, 0 to disable: "
(or alex/visual-wrap-column fill-column 0))))
(when (and (numberp new-wrap-column)
(zerop new-wrap-column))
(setq new-wrap-column nil))
(with-current-buffer (or buffer (current-buffer))
(visual-line-mode t)
(set (make-local-variable 'alex/visual-wrap-column) new-wrap-column)
(add-hook 'window-configuration-change-hook
'alex/update-visual-wrap-column nil t)
(let ((windows (get-buffer-window-list)))
(dolist (win windows)
(when (window-live-p win)
(with-selected-window win
(alex/update-visual-wrap-column)))))))
(defun alex/update-visual-wrap-column ()
"Update the right margin of the current window, to match the
available space to `alex/visual-wrap-column'."
(if (not alex/visual-wrap-column)
(set-window-margins nil nil)
(let* ((current-margins (window-margins))
(right-margin (or (cdr current-margins) 0))
(current-width (window-width))
(current-available (+ current-width right-margin)))
(if (<= current-available alex/visual-wrap-column)
(set-window-margins nil (car current-margins))
(set-window-margins nil (car current-margins)
(- current-available alex/visual-wrap-column))))))
#+end_src
** Localization
I want to use german names for month and weekdays.
#+begin_src emacs-lisp
(setq calendar-week-start-day 1
calendar-day-name-array ["Sonntag" "Montag" "Dienstag" "Mittwoch"
"Donnerstag" "Freitag" "Samstag"]
calendar-month-name-array ["Januar" "Februar" "März" "April" "Mai"
"Juni" "Juli" "August" "September"
"Oktober" "November" "Dezember"])
#+end_src
** Browser
I have a simple wrapper script to be able to easily switch to a
different browser. So I only have to configure to use this wrapper
script.
#+begin_src emacs-lisp
(setq browse-url-browser-function 'browse-url-generic
browse-url-generic-program "browser")
#+end_src
** Movement
The defaults for the cursor movement and scrolling are not very good,
so I need to customize the settings to match the expectations.
*** Scrolling
If I move the cursor out of screen, I do not want to jump to recenter
the cursor, but scroll just as far to display the cursor again.
#+begin_src emacs-lisp
(setq scroll-conservatively 10000
auto-window-vscroll nil)
#+end_src
Do not accelerate mouse scrolling.
#+begin_src emacs-lisp
(setq mouse-wheel-progressive-speed nil)
#+end_src
Automatic scroll the compilation output to the bottom (or the first
error).
#+begin_src emacs-lisp
(setq compilation-scroll-output t)
#+end_src
*** Automatic indentation
Automatic indent new lines.
#+begin_src emacs-lisp
(bind-key "RET" 'newline-and-indent)
#+end_src
But clean whitespaces, if the indentation is abandoned.
#+begin_src emacs-lisp
(use-package clean-aindent-mode
:config
(clean-aindent-mode t))
#+end_src
*** Back to indentation
I want to have a better handling for the =<home>= key. Per default I
want to move the cursor to the end of the indentation (first
non-whitespace character). Only if the cursor is already at that
position, I want to move to the beginning of the line.
#+begin_src emacs-lisp
(defun alex/back-to-indentation-or-beginning ()
"Move the point to the first non-whitespace character on the line,
of if it is already there, to the beginning of the line."
(interactive)
(if (= (point) (save-excursion (back-to-indentation) (point)))
(beginning-of-line)
(back-to-indentation)))
(bind-key "<home>" 'alex/back-to-indentation-or-beginning)
#+end_src
*** Ungreedy kill-word
The default =kill-word= (and =backward-kill-word=) is a bit greedy. I
want to replace =forward-word= in the original definition with
=forward-same-syntax=.
This could not be done with an advice because =forward-word= is a byte
code primitive and could not be replaced with =flet= or something like
that. So I have to copy the original definition of kill-word here and
simple do the replacement in the source.
#+begin_src emacs-lisp
(defun kill-word (arg)
"Kill characters forward until encountering the end of a word.
With argument ARG, do this that many times."
(interactive "p")
(kill-region (point) (progn (forward-same-syntax arg) (point))))
#+end_src
** Selection
The selection is the region between the mark and the point. But I want
to see the active region, so I want to ensure, that
transient-mark-mode is enabled globally.
#+begin_src emacs-lisp
(transient-mark-mode 1)
#+end_src
Additionally I have some enhancements to the default behaviour of some
commands.
*** Kill or copy whole line
If no region is active, I want to kill/copy the current line.
#+begin_src emacs-lisp
(defun alex/whole-line (func beg end &rest region)
(interactive (if mark-active
(list (region-beginning) (region-end))
(list (line-beginning-position)
(line-beginning-position 2))))
(apply func beg end region))
(advice-add 'kill-ring-save :around #'alex/whole-line)
(advice-add 'kill-region :around #'alex/whole-line)
#+end_src
*** Rectangle selection
The rectangle selection of cua mode works very well, but I only want
the rectangle selection mode and not the C-z/C-x/C-c/C-v bindings.
#+begin_src emacs-lisp
(setq cua-rectangle-mark-key (kbd "M-SPC")
cua-delete-selection nil)
(cua-selection-mode t)
#+end_src
*** X11 clipboard
Use the X11 clipboard in addition to the primary selection, because
some other X11 apps can only use the X11 clipboard.
#+begin_src emacs-lisp
(setq x-select-enable-clipboard t)
(setq interprogram-paste-function 'x-selection-value)
#+end_src
** Custom commands
Here I define some global custom commands. These commands are bind
in the =global-map= and are not associated with any other package.
*** Open terminal
Open an external terminal in the default directory of the current
buffer. In most cases this is the directory containing the file of the
current buffer.
#+begin_src emacs-lisp
(defun alex/open-buffer-shell ()
"Open a terminal in the default directory of the current buffer."
(interactive)
(if default-directory
(start-process-shell-command
"urxvt"
nil
(concat "DIR=" default-directory " urxvt"))
(message "Buffer does not contain a file.")))
(bind-key "<f12>" 'alex/open-buffer-shell)
#+end_src
** Bug fixes
A few workarounds about some strange emacs behaviour.
*** Key mapping
Some versions of urxvt send some strange key codes for some key
combinations. The following table contains the mappings from the
key codes send by urxvt and the real keys.
#+tblname: key-mappings
| Keycode | Key |
|-------------+-------------|
| M-[ Z | <S-tab> |
| <select> | <S-up> |
| M-[ b | <S-down> |
| M-[ c | <S-right> |
| M-[ d | <S-left> |
| M-O a | <C-up> |
| M-O b | <C-down> |
| M-O c | <C-right> |
| M-O d | <C-left> |
| ESC M-O a | <C-M-up> |
| ESC M-O b | <C-M-down> |
| ESC M-O c | <C-M-right> |
| ESC M-O d | <C-M-left> |
| ESC M-O A | <M-up> |
| ESC M-O B | <M-down> |
| ESC M-O C | <M-right> |
| ESC M-O D | <M-left> |
| ESC M-[ a | <M-S-up> |
| ESC M-[ b | <M-S-down> |
| ESC M-[ c | <M-S-right> |
| ESC M-[ d | <M-S-left> |
| <clearline> | <C-end> |
The tables is converted into the real key mappings with the following
function. It uses the org-babel stuff to convert the org-table into an
emacs-lisp variable.
#+begin_src emacs-lisp :var mappings=key-mappings
(if (not window-system)
(mapc (lambda (row)
(define-key function-key-map
(read-kbd-macro (car row))
(read-kbd-macro (cadr row))))
mappings))
#+end_src
*** Scroll speed
The scroll speed of emacs (at least 24.1) was very slow (esp. in
wanderlust summary buffers). The problem was, that for each line the
paragraph direction was checked. Because I do not use right-to-left
languages, I disable the auto detection
#+begin_src emacs-lisp
(when (boundp 'bidi-paragraph-direction)
(setq-default bidi-paragraph-direction 'left-to-right))
#+end_src
*** Sit-for
=sit-for= seems to modify the current-buffer and causes error message
during find-file (if a backup file exists). This fixes the problem
providing =sit-for= with a temporary buffer, that is destroyed
afterwards.
#+begin_src emacs-lisp
(defun alex/save-current-buffer (orig-fun &rest args)
"Do not allow the advised function to change the current-buffer."
(with-temp-buffer
(apply orig-fun args)))
(advice-add 'sit-for :around #'alex/save-current-buffer)
#+end_src
* Modes
** Core modes
These modes are part of the core and the auto-mode-alist is set up
automatically. So the mode should not be required.
*** cc-mode
Here I only add a hook for the configuration and a key-binding for the
mode key-map.
#+begin_src emacs-lisp
(defun alex/c-mode-setup ()
;; auto fill at column 80
(setq fill-column 80)
(turn-on-auto-fill)
;; semantic as for auto-complete
(add-to-list 'ac-sources ac-source-semantic)
;; now '_' is not considered a word-delimiter
(modify-syntax-entry ?_ "w")
;; indentation style
(c-set-style "linux")
(setq indent-tabs-mode t
c-basic-offset 4
tab-width 4)
(bind-key "C-c o" 'ff-find-other-file 'c-mode-map))
(add-hook 'c-mode-common-hook 'alex/c-mode-setup)
#+end_src
*** text-mode
I only activate =auto-fill-mode= for =text-mode= here. Additionally I
activate =text-mode= automatically for all files called only with
capital letters and without extension (like README or INSTALL).
#+begin_src emacs-lisp
(setq text-mode-hook 'turn-on-auto-fill)
(add-to-list 'auto-mode-alist '("\\`[A-Z]+\\'" . text-mode))
#+end_src
** Additional modes
Some additional modes for editing of special files types. Most of
them do not requires special configuration only =:mode= or
=:interpreter= from use-package to enable auto loading.
*** apache-mode
#+begin_src emacs-lisp
(use-package apache-mode
:mode ("\.htaccess$" "htpd\\.conf$" "srm\\.conf$" "access\\.conf$"
"apache[12]\?\\.conf$" "commonapache[12]\?\\.conf$"
"\/sites-enabled\/.*\.conf$"))
#+end_src
*** arduino-mode
#+begin_src emacs-lisp
(use-package arduino-mode
:mode "\\.pde\\'")
#+end_src
*** auctex
#+begin_src emacs-lisp
(use-package auctex
:mode ("\\.tex\\'" . latex-mode)
:commands (latex-mode LaTeX-mode plain-tex-mode)
:config
(setq TeX-view-program-list '(("Zathura" "zathura %o"))
TeX-view-program-selection '((output-pdf "Zathura"))))
#+end_src
*** autoconf-mode
#+begin_src emacs-lisp
(use-package autoconf-mode
:mode ("\\.ac\\'" "configure\\.in\\'"
("\\.at\\'" . autotest-mode)))
#+end_src
*** bibtex
#+begin_src emacs-lisp
(use-package bibtex
:mode ("\\.bib" . bibtex-mode))
#+end_src
*** crontab-mode
#+begin_src emacs-lisp
(use-package crontab-mode
:commands (crontab-mode))
#+end_src
*** css-mode
The css-mode requires a few adjustments for the indentation style.
#+begin_src emacs-lisp
(use-package css-mode
:mode "\\.css\\'"
:functions (cssm-c-style-indenter)
:config
(setq cssm-indent-level 4
cssm-newline-before-closing-bracket t
cssm-indent-function #'cssm-c-style-indenter))
#+end_src
*** csv-mode
#+begin_src emacs-lisp
(use-package csv-mode
:mode "\\.[Cc][Ss][Vv]\\'")
#+end_src
*** ebuild-mode
#+begin_src emacs-lisp
(use-package ebuild-mode
:mode ("\\.ebuild\\'" "\\.eclass\\'" "\\.eblit\\'"
("/[0-9]\\{4\\}-[01][0-9]-[0-3][0-9]-.+\\.[a-z]\\{2\\}\\.txt\\'"
. gentoo-newsitem-mode))
:interpreter ("runscript" . sh-mode))
#+end_src
*** eselect-mode
#+begin_src emacs-lisp
(use-package eselct-mode
:mode "\\.eselect\\'")
#+end_src
*** graphviz-dot-mode
#+begin_src emacs-lisp
(use-package graphviz-dot-mode
:mode ("\\.dot\\'" "\\.gv\\'"))
#+end_src
*** haskell-mode
I need haskell-mode and it is required to initialize the indentation
scheme on activation (else a pop-up will ask you to do so, if you press
=<TAB>= inside a haskell buffer).
#+begin_src emacs-lisp
(use-package haskell-mode
:mode ("\\.hs\\'" "\\.gs\\'" "\\.hi\\'"
("\\.l[gh]s\\'" . literate-haskell-mode)
("\\.cabal\\'" . haskell-cabal-mode))
:interpreter ("runghc" "runhaskell")
:config
(add-hook 'haskell-mode-hook 'turn-on-haskell-indentation))
#+end_src
*** javascript
#+begin_src emacs-lisp
(use-package javascript
:mode ("\\.js\\'" . javascript-mode))
#+end_src
*** lua-mode
#+begin_src emacs-lisp
(use-package lua-mode
:mode "\\.lua\\'")
#+end_src
*** php-mode
#+begin_src emacs-lisp
(use-package php-mode
:mode ("\\.php[s34]?\\'" "\\.phtml\\'" "\\.inc\\'"))
#+end_src
*** po-mode
#+begin_src emacs-lisp
(use-package po-mode
:mode "\\.po\\'\\|\\.po\\.")
#+end_src
*** promela-mode
Simple mode for promela files. The file extension is not standardized,
so I add a few different extensions.
#+begin_src emacs-lisp
(use-package promela-mode
:mode ("\\.promela\\'" "\\.spin\\'" "\\.pml\\'" "\\.prm\\'" "\\.porm\\'")
:config
(setq promela-block-indent 2
promela-selection-indent 0
promela-selection-option-indent 3))
#+end_src
*** protobuf-mode
#+begin_src emacs-lisp
(use-package protobuf-mode
:mode "\\.proto\\'")
#+end_src
*** python
#+begin_src emacs-lisp
(use-package python
:mode ("\\.py\\'" . python-mode)
:interpreter ("python" . python-mode)
:functions (python-continuation-line-p)
:config
<<python>>)
#+end_src
**** Fix indentation of closing brackets
This fixes the indentation of the closing brackets for line
continuations in python. The opening and closing brackets should be
lined up in the same column.
#+begin_src emacs-lisp :noweb-ref python :tangle no
(defun alex/python-indent-closing-brackets (func &rest args)
"Handle lines beginning with a closing bracket and indent them so that
they line up with the line containing the corresponding opening bracket."
(save-excursion
(beginning-of-line)
(let ((syntax (syntax-ppss)))
(if (and (not (eq 'string (syntax-ppss-context syntax)))
(python-continuation-line-p)
(cadr syntax)
(skip-syntax-forward "-")
(looking-at "\\s)"))
(progn
(forward-char 1)
(ignore-errors (backward-sexp))
(current-indentation))
(apply func args)))))
(advice-add 'python-calculate-indentation :around
#'alex/python-indent-closing-brackets)
#+end_src
*** xrdb-mode
#+begin_src emacs-lisp
(use-package xrdb-mode
:mode ("\\.Xdefaults\\'" "\\.Xenvironment\\'" "\\.Xresources\'"
"\\.Xdefaults.d/"))
#+end_src
* Packages
** ace-window
ace-window is a replacement for =C-x o= that let you switch to a
specific window. It displays a marker in all windows and switch to the
select one. It is also possible execute some actions on the window
(swap, split or delete) by pressing a dispatch key before selecting
the window. It is not optimal, because it does not display the
possibility. Maybe I will replace it with a custom hydra.
#+begin_src emacs-lisp
(use-package ace-window
:bind (("C-x o" . ace-window)
("C-x C-o" . aw-flip-window))
:config
(setq aw-scope 'frame
aw-dispatch-always t
aw-dispatch-alist '((?x aw-delete-window " Ace - Delete Window")
(?m aw-swap-window " Ace - Swap Window")
(?n aw-flip-window)
(?v aw-split-window-vert " Ace - Split Vert Window")
(?h aw-split-window-horz " Ace - Split Horz Window")
(?i delete-other-windows " Ace - Maximize Window")
(?o delete-other-windows))))
#+end_src
** auto-complete
auto-complete uses a popup to display possible completions of the
input. The popup is displayed automatically after some idle time or
when pressing the shortcut (but the auto-complete-mode has to be
enabled before).
#+begin_src emacs-lisp
(use-package auto-complete
:bind ("M-<tab>" . auto-complete)
:demand t
:diminish auto-complete-mode
:config
(require 'auto-complete-config)
(ac-config-default)
(setq ac-comphist-file (alex/cache-file "ac-comphist.dat")
ac-quick-help-delay 1.0)
(global-auto-complete-mode t))
#+end_src
** TODO company-mode
Should be better than auto-complete-mode and the code should be more
modern.
** cursor-chg
I want to change the cursor if the buffer is readonly or if I enabled
overwrite. =cursor-chg= can change the shape of the cursor. The color
of the cursor could not be changed, because the cursor-color is a
frame parameter and could be set for a single buffer.
#+begin_src emacs-lisp
(use-package cursor-chg
:config
(toggle-cursor-type-when-idle 1)
(change-cursor-mode 1))
#+end_src
** deft
#+begin_src emacs-lisp
(use-package deft
:bind ("<f9>" . deft)
:config
(setq deft-extension "org"
deft-directory "~/.org/deft/"
deft-text-mode 'org-mode))
#+end_src
** dired-x
I use dired-x mostly for the features for omitting files. I customize
the arguments for the listing to add a trailing slash for directories
(that way I can omit files like =*.d= but keep directories matching
the same regexp). I enable =dired-omit-mode= per default in all dired
buffers.
#+begin_src emacs-lisp
(use-package dired-x
:config
(setq dired-omit-files "^\\.?#\\|~$\\|^\\.svn/$\\|^\\.git\$"
dired-omit-extensions (append completion-ignored-extensions
dired-latex-unclean-extensions
dired-bibtex-unclean-extensions
dired-texinfo-unclean-extensions)
dired-listing-switches "-pal --group-directories-first")
(add-hook 'dired-mode-hook (lambda () (dired-omit-mode 1))))
#+end_src
** doxymacs
Currently I use doxymacs only to add font-lock for doxymacs tags.
#+begin_src emacs-lisp
(defun alex/doxymacs-font-lock ()
(when (member major-mode '(c-mode c++-mode))
(when (not (fboundp 'doxymacs-font-lock))
(use-package doxymacs
:load-path "/usr/share/emacs/site-lisp/doxymacs/")
(when (not (fboundp 'doxymacs-font-lock))
(fset 'doxymacs-font-lock 'ignore)))
(doxymacs-font-lock)))
(add-hook 'font-lock-mode-hook 'alex/doxymacs-font-lock)
#+end_src
** edit-server
Allow to exit text areas from a browser with emacs. Open the buffers
in a new frame in org-mode.
#+begin_src emacs-lisp
(use-package edit-server
:config
(setq edit-server-new-frame t
edit-server-default-major-mode 'org-mode
edit-server-new-frame-alist '((name . "EDIT with Emacs")))
(edit-server-start))
#+end_src
** expand-region
This will create a region around semantic elements and let you expand
and contract it around larger/smaller semantic units.
#+begin_src emacs-lisp
(use-package expand-region
:bind (("C-<return>" . er/expand-region)
("M-<return>" . er/contract-region)))
#+end_src
** filladapt
Indent a filled line (manual or with auto-fill-mode) according to some
heuristics with spaces, comments or citation marks. This is not
available on ELPA so we need to load it from the local =lisp/= folder
in the =user-emacs-directory=.
#+begin_src emacs-lisp
(use-package filladapt
:load-path "lisp/"
:diminish filladapt-mode
:config
(setq-default filladapt-mode t)
(add-hook 'org-mode-hook #'turn-off-filladapt-mode)
(add-hook 'compilation-mode-hook #'turn-off-filladapt-mode))
#+end_src
** flymake-jshint
When entering a javascript buffer, try to load flymake-jshint and
activate flymake-mode when it could be loaded successfully. This is a
possibility to defer the loading of the flymake-jshint library until
it is really required.
#+begin_src emacs-lisp
(defun alex/jshint-init ()
"Try to load `flymake-jshint' if not already loaded and activate
flymake-mode if it could be loaded successfully."
(if (fboundp 'flymake-jshint-init)
(flymake-mode 1)
(use-package flymake-jshint)
(when (fboundp 'flymake-jshint-init)
(flymake-mode 1))))
(add-hook 'js-mode-hook 'alex/jshint-init)
#+end_src
** git-gutter-fringe
If running under X11 I want to have little git marker on the right
side in the fringe. Therefore I use git-gutter-fringe and I override
the modification function from =fringe-helper= because it does
something strange with the beg and end parameters.
To make space for the git-gutter signs, I extend the width of the
right fringe a bit (left side is kept at the default width).
#+begin_src emacs-lisp
(use-package git-gutter-fringe
:if window-system
:config
(setq git-gutter-fr:side 'right-fringe)
(fringe-mode '(nil . 15))
(global-git-gutter-mode +1)
;; fix the helper function (does something strange with beg and end)
(defun fringe-helper-modification-func (ov after-p beg end &optional len)
;; Sometimes this hook is called with a deleted overlay.
(when (overlay-start ov)
(let ((ov-beg (overlay-start ov))
(ov-end (overlay-end ov)))
(if after-p
(if (eq beg end)
;; evaporate overlay
(delete-overlay ov)
;; if new lines are inserted, add new bitmaps
(let ((before-string (overlay-get ov 'before-string))
fringe-ov)
(save-excursion
(goto-char ov-beg)
(while (search-forward "\n" ov-end t)
(setq fringe-ov (make-overlay (point) (point)))
(overlay-put fringe-ov 'before-string before-string)
(overlay-put fringe-ov 'fringe-helper-parent ov)))))
;; if a \n is removed, remove the fringe overlay
(save-excursion
(goto-char ov-beg)
(while (search-forward "\n" ov-end t)
(let ((overlays (overlays-in (point) (1+ (point)))))
(while overlays
(when (eq (overlay-get (car overlays) 'fringe-helper-parent) ov)
(delete-overlay (car overlays))
(setq overlays nil))
(pop overlays)))))))))
:diminish
git-gutter-mode)
#+end_src
** helm
I use helm completion everywhere and I do /not/ autoload helm, because
it would slow down the first completions and I am sure I will use helm
every time I start emacs.
#+begin_src emacs-lisp
(use-package helm
:bind (("M-x" . helm-M-x)
("M-X" . execute-extended-command)
("C-x f" . helm-mini)
("C-x b" . helm-buffers-list)
("C-x C-b" . helm-buffers-list)
("M-y" . helm-show-kill-ring))
:demand t
:ensure t
:diminish helm-mode
:config
<<helm-config>>
(helm-mode 1))
#+end_src
The basic configuration for helm is provided by helm-config.
#+begin_src emacs-lisp :noweb-ref helm-config :tangle no
(use-package helm-config)
#+end_src
Customize the prefix key and setup =<tab>= as convenient execute the
persistent-action without quitting helm.
#+begin_src emacs-lisp :noweb-ref helm-config :tangle no
(bind-key "<tab>" 'helm-execute-persistent-action helm-map)
(setq helm-command-prefix-key "C-c h")
#+end_src
*** configuration
Now I customize the helm configuration:
**** visual
I want to split the current window to display the helm completion
window and want to cycle through the results.
#+begin_src emacs-lisp :noweb-ref helm-config :tangle no
(setq helm-split-window-in-side-p t
helm-move-to-line-cycle-in-source t)
#+end_src
**** scroll other window
I do not want to scroll the other window by pages, but by 10
lines. This is useful, if I preview a file or a buffer with the
persistent action and want to scoll around a bit.
#+begin_src emacs-lisp :noweb-ref helm-config :tangle no
(setq helm-scroll-amount 10)
#+end_src
**** history
I want to use =recentf-list= instead of the normal =file-name-history=,
because it is more configurable and more complete.
I /always/ want to save the history for executed commands, even if the
command has failed.
#+begin_src emacs-lisp :noweb-ref helm-config :tangle no
(setq helm-ff-file-name-history-use-recentf t
helm-M-x-always-save-history t)
#+end_src
**** fuzzy matching
Enable fuzzy matching on some helm modes. There is also
=helm-mode-fuzzy-match= that would enable fuzzy match in every helm
mode, that would also modify sorting.
#+begin_src emacs-lisp :noweb-ref helm-config :tangle no
(setq helm-apropos-fuzzy-match t
helm-buffers-fuzzy-matching t
helm-ff-fuzzy-matching t
helm-projectile-fuzzy-match t
helm-recentf-fuzzy-match t
helm-M-x-fuzzy-match t)
#+end_src
**** recursive minibuffers
Recursive minibuffers allow to execute a minibuffer command while
currently in the minibuffer. With this enabled, I could use the
/completion at point/ from the minibuffer (maybe from
=eval-expression=).
#+begin_src emacs-lisp :noweb-ref helm-config :tangle no
(setq enable-recursive-minibuffers t)
#+end_src
*** helm-projectile
Enable helm support for projectile and replace many projectile
commands with helm completion.
#+begin_src emacs-lisp
(use-package helm-projectile
:ensure t
:after (helm)
:init
; This needs to be set before loading helm-projectile
(setq helm-projectile-fuzzy-match t)
:config
(helm-projectile-on))
#+end_src
** hydra
With hydra I can build easy groups of commands that (maybe) can
repeated and share a common prefix. The advantage over other
mechanisms is, that hydra will show a overview of the available keys
after pressing the prefix. It is very flexible and maybe I should
create more hydras.
#+begin_src emacs-lisp
(use-package hydra
:bind (("C-M-s" . alex/hydra-splitter/body)
("<f2>" . alex/hydra-zoom/body)
("C-t" . alex/hydra-toggle/body))
:config
<<helm>>)
#+end_src
*** move splitter
With this hydra I can move the splitter between frames using the
cursor keys.
#+begin_src emacs-lisp :noweb-ref helm :tangle no
(require 'hydra-examples)
(defhydra alex/hydra-splitter ()
"Move window spitter"
("<left>" hydra-move-splitter-left)
("<right>" hydra-move-splitter-right)
("<up>" hydra-move-splitter-up)
("<down>" hydra-move-splitter-down))
#+end_src
*** zoom
With this hydra I can change font site on demand, by repeatedly
pressing + or - until the desired font-size is reached.
#+begin_src emacs-lisp :noweb-ref helm :tangle no
(defhydra alex/hydra-zoom ()
"Change font size"
("+" text-scale-increase "zoom in")
("-" text-scale-decrease "zoom out"))
#+end_src
*** toggle
With this hydra I can toggle various common settings (or minor-modes)
using some shortcuts.
Because the keys are already documented in the docstring, hydra should
not show all the keys again in the mode line and we globally set the
hint to nil.
#+begin_src emacs-lisp :noweb-ref helm :tangle no
(defhydra alex/hydra-toggle (:hint nil)
"
Toggle common settings/minor-modes:
\[_d_\] debug-on-error: %`debug-on-error
\[_f_\] auto-fill-mode: %`auto-fill-function
\[_l_\] truncate-lines: %`truncate-lines
\[_w_\] whitespace-mode: %`whitespace-mode
\[_t_\] trailing-whitespaces: %`alex/tw-mode
\[_s_\] flyspell-mode: %`flyspell-mode
\[_q_\] quit
"
("d" toggle-debug-on-error)
("f" auto-fill-mode)
("l" toggle-truncate-lines)
("w" whitespace-mode)
("t" alex/tw-mode)
("s" flyspell-mode)
("q" nil))
#+end_src
** imenu
=imenu= is part of core and does not need to be required.
#+begin_src emacs-lisp
(bind-key [mouse-3] 'imenu)
#+end_src
** ispell
I want to use aspell to check the spelling. It correctly supports
Unicode and can have a very good quality of the suggestions.
#+begin_src emacs-lisp
(setq ispell-program-name "aspell"
ispell-extra-args '("--sug-mode=slow"))
#+end_src
Normally I do not want to enable flyspell-mode automatically. I only
want to enable it, if I specify a dictionary with =flyspell-dict= as
file-local variable.
Here I define a buffer-local variable and allow the setting of all
strings as local variable without question.
#+begin_src emacs-lisp
(defvar flyspell-dict nil
"Dictionary name, that should be set during `find-file' for
`flyspell-mode'. Set this as file-local or dir-local variable to
enable `flyspell-mode' automaticaly.")
(make-variable-buffer-local 'flyspell-dict)
(put 'flyspell-dict 'safe-local-variable #'stringp)
#+end_src
Enable ispell (if available) and iterate with =F8= over the list of
preferred dictionaries.
#+begin_src emacs-lisp
(use-package ispell
:config
(defvar alex/dictionaries '("english" "german")
"List of available dictionaries for ispell.")
(defun alex/switch-dictionary()
(interactive)
(let ((new (alex/get-next ispell-current-dictionary alex/dictionaries)))
(ispell-change-dictionary new)
(message "Dictionary switched to %s" new)))
(global-set-key (kbd "<f8>") 'switch-dictionary)
(use-package flyspell
:config
<<flyspell-config>>))
#+end_src
Update the flyspell status on various changes to the spell checking
(selecting a different dictionary or adding a word to the personal
dictionary).
#+begin_src emacs-lisp :noweb-ref flyspell-config :tangle no
(defun alex/flyspell-update (&rest args)
(when flyspell-mode
(flyspell-buffer)))
(add-hook 'flyspell-mode-hook 'alex/flyspell-update)
(advice-add 'ispell-change-dictionary :after #'alex/flyspell-update)
(advice-add 'ispell-pdict-save :after #'alex/flyspell-update)
#+end_src
If =flyspell-dict= is set for the current buffer, set the value as
current ispell dictionary and enable flyspell-mode. =flyspell-dict=
should be set as local variable (file-local or dir-local).
#+begin_src emacs-lisp :noweb-ref flyspell-config :tangle no
(defun alex/auto-flyspell-mode ()
"Automatically set `flyspell-dict' as dictionary for ispell and
enable `flyspell-mode'."
(when flyspell-dict
(ispell-change-dictionary flyspell-dict)
(flyspell-mode 1)))
(add-hook 'find-file-hook 'alex/auto-flyspell-mode)
#+end_src
This ignores all incorrect words in lines starting with
=#include=. =flyspell-prog-mode= only checks strings and comments, but
the include files could look like strings.
#+begin_src emacs-lisp :noweb-ref flyspell-config :tangle no
(defun alex/flyspell-ignore-include (start end sug)
"Ignores all spelling errors in lines starting with #include."
(save-excursion
(goto-char start)
(beginning-of-line)
(if (looking-at "#include")
t
nil)))
(add-hook 'flyspell-incorrect-hook 'alex/flyspell-ignore-include)
#+end_src
** magit
magit is a great mode for managing git repositories. I generally use
=magit-status= as entry point for viewing repository status, staging
and committing. For writing good commit messages, I activate
=flyspell-mode= in the =magit-log-edit-mode=.
#+begin_src emacs-lisp
(use-package magit
:bind ("<f5>" . magit-status)
:config
(add-hook 'magit-log-edit-mode-hook (lambda () (flyspell-mode 1))))
#+end_src
** multi-term
multi-term supports much more terminal applications than similar modes
and can automatically toggle a dedicated window. The only disadvantage
is, that it does not work in combination with tramp.
#+begin_src emacs-lisp
(use-package multi-term
:bind (("C-c t" . multi-term-dedicated-toggle)
("C-c T" . multi-term))
:config
;;(setq multi-term-dedicated-select-after-open-p t)
)
#+end_src
** neotree
I rarely use a files browser in parallel to the main window. Usually I
simply use =find-file= or a dired buffer. But if I really need it,
neotree is a nice replacement for speedbar and simply work out of the
box. I only added projectile support, so that the neotree open per
default the project root (aka. the root of the git repository).
#+begin_src emacs-lisp
(use-package neotree
:commands (neotree-dir neotree-find neotree-show)
:bind ("C-<tab>" . neotree-project-dir)
:init
(defun alex/neotree-find-file (dir file)
(neotree-dir dir)
(if file
(neotree-find (file-relative-name file dir))))
(defun neotree-project-dir ()
"Open NeoTree using the git root."
(interactive)
(if (and (fboundp 'neo-global--window-exists-p)
(neo-global--window-exists-p))
(neotree-hide)
(if (fboundp 'projectile-project-root)
(let ((projectile-require-project-root nil))
(let ((project-dir (projectile-project-root))
(file-name (projectile-file-truename (buffer-file-name))))
(if project-dir
(alex/neotree-find-file project-dir file-name)))))
(neotree-show))))
#+end_src
** nlinum
I generally want to have line numbers. nlinum works best with folding,
so I use that.
#+begin_src emacs-lisp
(use-package nlinum
:config
<<nlinum-config>>)
#+end_src
*** global mode
I use my global-excluding-minor-mode stuff an define some exceptions,
where I do not want to have line numbers.
#+begin_src emacs-lisp :noweb-ref nlinum-config :tangle no
(alex/define-global-excluding-minor-mode 'nlinum-mode)
(setq nlinum-mode-exclude-list
'(:minibuffer
:mode
Custom-mode
Man-mode
compilation-mode
dired-mode
doc-view-mode
eshell-mode
helm--mode
helm--remap-mouse-mode
image-mode
magit-mode
magit-status-mode
neotree-mode
term-mode
text-mode
weechat-mode
wl-folder-mode
wl-summary-mode))
(alex/global-nlinum-mode t)
#+end_src
*** number format
I want to have some spacing around the numbers and calculate the
width, so that the width does not change during scrolling.
#+begin_src emacs-lisp :noweb-ref nlinum-config :tangle no
(setq nlinum-format " %d ")
(defun alex/nlinum-max-width ()
"Calculate maximum width of line numbers"
(setq nlinum--width
(length (format nlinum-format
(count-lines (point-min) (point-max)))))
(nlinum--flush))
(add-hook 'nlinum-mode-hook 'alex/nlinum-max-width)
#+end_src
*** fix make-frame
linum/nlinum currently triggers a bug in emacs: [[https://lists.gnu.org/archive/html/emacs-devel/2014-09/msg00022.html][Trunk emacs infelicity
with linum mode]] that make it impossible to create a new frame while
linum mode is active in at least on buffer. To fix this I
around-advice =make-frame= and deactivate nlinum before and reactivate
it again after creating the frame.
#+begin_src emacs-lisp :noweb-ref nlinum-config :tangle no
(defun alex/deactivate-nlinum (buffer)
"Deactivates nlinum in the given BUFFER"
(with-current-buffer buffer
(nlinum-mode 0)))
(defun alex/activate-nlinum (buffer)
"Activates nlinum in the given BUFFER"
(with-current-buffer buffer
(let ((res (nlinum-mode 1)))
(nlinum--flush)
res)))
(defun alex/fix-nlinum (func &rest args)
"nlinum currently (emacs-24) triggers a bug, that makes it
impossible to create new frames because the linum face is not
defined. This is a fix, that deactivates nlinum in all buffers and
activate it again after creating the new frame."
(let ((nlinum-buffers (alex/get-buffers-with 'nlinum-mode)))
(mapc 'alex/deactivate-nlinum nlinum-buffers)
(alex/safe-call
(apply func args)
(mapc 'alex/activate-nlinum nlinum-buffers))))
(advice-add 'make-frame :around #'alex/fix-nlinum)
#+end_src
** org
I use org-mode for my emacs config, taking notes, scheduling tasks and
maybe more.
#+begin_src emacs-lisp
(use-package org
:mode ("\\.org\\'" . org-mode)
:demand t
:config
<<org>>)
#+end_src
*** visual
I want to have a nice display.
On opening a org file, I want to see the outline but not the content
of all nodes. This is useful to get an overview.
The nested org nodes should be intended, so that it is easy to see the
level, but I do not want to see the repeated stars in front of the
nodes. (The nodes may even got more fancy, if org-bullets is
available. See below.)
If some parts are hidden, I want to prevent editing. If an edit action
is started the hidden region will be unfolded and the action has to be
confirmed.
#+begin_src emacs-lisp :noweb-ref org :tangle no
(setq org-startup-folded 'content
org-startup-indented t
org-catch-invisible-edits t)
#+end_src
Hide =org-indent-mode= from modeline.
#+begin_src emacs-lisp
(alex/rm-add-blacklist " Ind")
#+end_src
*** modules
Setup some default modules to load. Some other modules might get
loaded on demand (see below).
#+begin_src emacs-lisp :noweb-ref org :tangle no
(setq org-modules '(org-annotate-file org-bbdb
org-checklist org-collector org-eval org-expiry
org-habit org-info org-man org-mouse org-protocol
org-toc org-wl))
(org-load-modules-maybe t)
#+end_src
*** todo keywords
Define some default TODO keywords and corresponding faces, that match
my theme with a dark background.
#+begin_src emacs-lisp :noweb-ref org :tangle no
(setq org-todo-keywords
'((sequence "TODO" "STARTED(s)" "WAITING(w)" "DELEGATED(l)" "|"
"DONE(d)" "DEFERRED(f)" "CANCELLED(x)"))
org-todo-keyword-faces
'(("TODO" . (:inherit org-warning))
("STARTED" . (:foreground "yellow" :weight bold))
("DELEGATED" . (:foreground "darkred" :weight bold))
("DEFERRED" . (:foreground "gray" :weight bold))
("CANCELLED" . (:foreground "gray" :weight normal))
("DONE" . (:foreground "cyan" :weight bold))))
#+end_src
*** bullets
Automatically use org-bullets-mode if available and add the
possibility to disable it on a per-file basis with
=#+STARTUP: nobullets=.
#+begin_src emacs-lisp :noweb-ref org :tangle no
(defvar alex/org-startup-with-bullets t
"Not-nil means entering Org-mode will enable org-bullets. This can
also be configured on a per-file basis adding on of the following
lines anywhere in the buffer:
,#+STARTUP: bullets
,#+STARTUP: nobullets")
(defun alex/org-bullets-setup ()
"Enable org-bullets if `alex/org-startup-with-bullets' is not-nil."
(when alex/org-startup-with-bullets
(org-bullets-mode 1)))
(add-hook 'org-mode-hook 'alex/org-bullets-setup)
(setq org-startup-options
(append org-startup-options
'(("bullets" org-startup-with-bullets t)
("nobullets" org-startup-with-bullets nil))))
(use-package org-bullets
:commands (org-bullets-mode))
#+end_src
*** agenda
The agenda view should be generated only from the =todo.org= file.
This file is the central place where I manage all TODO entries used
for the agenda view and the daily schedule. The agenda view should
always display 7 days from today, even if there are no scheduled tasks
for a day.
#+begin_src emacs-lisp :noweb-ref org :tangle no
(use-package org-agenda
:bind ("C-c a" . org-agenda)
:config
(setq org-agenda-files '("~/doc/org/todo.org")
org-agenda-span 'week
org-deadline-warning-days 14
org-agenda-show-all-dates t
org-agenda-skip-deadline-if-done t
org-agenda-skip-scheduled-if-done t
org-agenda-start-on-weekday nil
org-reverse-note-order t
org-fast-tag-selection-single-key 'expert))
#+end_src
*** capture
Org-capture can quickly create notes or todo entries. It can also used
in combination with org-protocol to receive information from other
programs (like a web browser).
#+begin_src emacs-lisp :noweb-ref org :tangle no
(use-package org-capture
:commands (org-capture)
:bind ("C-c o" . org-capture)
:config
(setq org-default-notes-file "~/doc/org/notes.org"
org-capture-templates
'(("t" "Tasks" entry
(file "~/doc/org/todo.org")
"* TODO %?\n%u")
("n" "Notes" entry
(file+headline "~/doc/org/notes.org" "Notes")
"* %u %?")
("c" "Capture" entry
(file+headline "~/doc/org/notes.org" "Links")
"* %^{Title}\n\nSource: %u, %c\n\n%i"))))
#+end_src
*** protocol
Set default org-capture-template for org-protocol.
#+begin_src emacs-lisp :noweb-ref org :tangle no
(setq org-protocol-default-template-key "c")
#+end_src
When I start an org-capture in an org-protocol popup, I want to show
only the org-capture buffer (default behaviour would be to split the
current buffer) and I want to close the popup after finishing the
capture.
When using org-capture with placeholders, we need to delete the other
windows just before starting to filling out the placeholders. The
advice after org-capture is too late, it would delete the other
windows after filling the placeholders.
#+begin_src emacs-lisp :noweb-ref org :tangle no
(defun alex/org-capture-single-window (&rest args)
"Make the org-capture the only window when used as a popup"
(when (equal "emacs-capture" (frame-parameter nil 'name))
(delete-other-windows)))
(advice-add 'org-capture :after #'alex/org-capture-single-window)
(advice-add 'org-completing-read-no-i :before #'alex/org-capture-single-window)
(defun alex/org-capture-delete-frame (&rest args)
"Close the frame after finishing the capture, when used org-capture
as a popup"
(when (equal "emacs-capture" (frame-parameter nil 'name))
(delete-frame)))
(advice-add 'org-capture-finalize :after #'alex/org-capture-delete-frame)
#+end_src
*** journal
#+begin_src emacs-lisp :noweb org-config :tangle no
(use-package org-journal
:bind ("C-c C-j" . org-journal-new-entry)
:config
(setq org-journal-dir "~/doc/org/journal/"
org-agenda-file-regexp "\\`\\([^.].*\\.org\\|[0-9]+\\)\\'"))
#+end_src
*** org without helm
org has a function, that requests input without ido completion. For
this function I disable helm.
#+begin_src emacs-lisp :noweb-ref org :tangle no
(defun alex/run-without-helm (orig-func &rest args)
"Run a function without helm completion."
(if (boundp 'helm-mode)
(let ((orig-helm-mode helm-mode))
(helm-mode 0)
(alex/safe-call
(apply orig-func args)
(when orig-helm-mode
(helm-mode 1))))
(apply orig-func args)))
(advice-add 'org-completing-read-no-i :around #'alex/run-without-helm)
#+end_src
** origami
Sometimes I want to fold some code sections. There are several mode
available, but only origami supports insertion of new regions without
reopening or parsing the whole buffer. But I do not want to use the
semantic expression feature of origami and my markers should support a
title in the first line after the marker.
I define my own parser for origami and modify the behaviour for my
needs.
#+begin_src emacs-lisp
(use-package origami
:demand t
:bind (("C-c C-f" . origami-toggle-node)
("C-c M-f" . origami-close-all-nodes)
("C-c f" . origami-open-all-nodes))
:config
<<origami-config>>)
#+end_src
*** custom format for folded display
Per default origami is used to fold semantic expressions and only
shows the marker at the front and end of the region. I want to use
explicit marker inside comments and want to add a description (title)
for the region after the opening marker. So I want to keep the whole
first line visible while the region is folded.
#+begin_src emacs-lisp :noweb-ref origami-config :tangle no
(defun alex/origami-build-pair-tree (create open close positions)
"This is like `origami-build-pair-tree' and now keeps the whole
first line visible while folded."
(cl-labels ((build (positions)
;; this is so horrible, but fast
(let (acc beg (should-continue t))
(while (and should-continue positions)
(cond ((equal (caar positions) open)
(if beg ;go down a level
(let* ((res (build positions))
(new-pos (car res))
(children (cdr res))
(beg-end (save-excursion
(goto-char beg)
(line-end-position)))
(end (cdar new-pos)))
(setq positions (cdr new-pos))
(setq acc (cons (funcall create beg (+ end (length close)) (- beg-end beg) children)
acc))
(setq beg nil))
;; begin a new pair
(setq beg (cdar positions))
(setq positions (cdr positions))))
((equal (caar positions) close)
(if beg
(let ((beg-end (save-excursion
(goto-char beg)
(line-end-position)))
(end (cdar positions)))
(if (< beg-end end)
;;close with no children
(setq acc (cons (funcall create beg (+ end (length close)) (- beg-end beg) nil)
acc)))
(setq positions (cdr positions))
(setq beg nil))
(setq should-continue nil)))))
(cons positions (reverse acc)))))
(cdr (build positions))))
#+end_src
*** respect derived modes
I manually specify the parser for the origami markers. For more
flexibility I want to support derived modes (f.e. if I assign a value
for emacs-list-mode, this parser should also support the
lisp-interaction-mode).
Therefore I advice the =origami-get-parser= function and temporarily
overwrite the =origami-parser-alist= and change all definitions with a
compatible mode to the exact major mode of the requested buffer.
#+begin_src emacs-lisp :noweb-ref origami-config :tangle no
(defun alex/origami-is-derived-mode (buffer parser-elem)
"Helper for `alex/origami-parser-derived-modes' to check if the
current major-mdoe in BUFFER is a dreived mode of the mode part of
an element from the `origami-parser-alist'."
(let ((mode (car parser-elem))
(parser (cdr parser-elem)))
(with-current-buffer buffer
(if (derived-mode-p mode)
(cons major-mode parser)
nil))))
(defun alex/origami-parser-derived-modes (func buffer &rest args)
"Modify the origami-parser-alist on demand to respect the derived
major-modes of the defined modes."
(let* ((check (apply-partially 'alex/origami-is-derived-mode buffer))
(origami-parser-alist (delq nil (mapcar check origami-parser-alist))))
(apply func buffer args)))
(advice-add 'origami-get-parser :around #'alex/origami-parser-derived-modes)
#+end_src
*** define simple marker for different modes
#+begin_src emacs-lisp :noweb-ref origami-config :tangle no
(defun alex/origami-markers-parser (begin end create)
"Create a origami parser for regions between BEGIN and END
markers. The folded region will show the complete first line after the
marker but not the END marker."
(lexical-let ((create-tmp create)
(begin-tmp begin)
(end-tmp end)
(regexp (rx-to-string `(or ,begin ,end))))
(lambda (content)
(let ((positions (origami-get-positions content regexp)))
(alex/origami-build-pair-tree create-tmp begin-tmp end-tmp positions)))))
(defun alex/origami-marker (mode start end)
"Define a cons with MODE and the marker-parser for origmai, that
could be used directly as element for `origami-parser-alist'."
`(,mode . ,(apply-partially 'alex/origami-markers-parser start end)))
(setq origami-parser-alist
`(,(alex/origami-marker 'emacs-lisp-mode ";;{{{" ";;}}}")
,(alex/origami-marker 'lisp-mode ";;{{{" ";;}}}")
,(alex/origami-marker 'sh-mode "#{{{" "#}}}")
,(alex/origami-marker 'php-mode "//{{{" "//}}}")
,(alex/origami-marker 'haskell-mode "--{{{" "--}}}")))
#+end_src
*** global-minor-mode
I want to use origami-mode everywhere, so I create a global minor-mode
and activate it.
#+begin_src emacs-lisp :noweb-ref origami-config :tangle no
(alex/define-global-excluding-minor-mode 'origami-mode)
(alex/global-origami-mode t)
#+end_src
** powerline
I use powerline to get a nicer modeline, but I change some aspects to
enhance it even more.
#+begin_src emacs-lisp
(use-package powerline
:config
<<powerline-config>>)
#+end_src
*** display utf8 glyphs
Currently powerline only displays the nice utf-8 glyphs (f.e. for git
branches) if =window-system= is nil. So we simply wrap =powerline-vc=
and temporarily unset =window-system=.
#+begin_src emacs-lisp :noweb-ref powerline-config :tangle no
(defun alex/fix-powerline-vc (orig-fun &rest args)
"Fix utf8 glyphs display."
(let ((window-system nil))
(apply orig-fun args)))
(advice-add 'powerline-vc :around #'alex/fix-powerline-vc)
#+end_src
*** smart-mode-line
I only use smart-mode-line for the file paths feature. I need to call
=sml/setup=, but I do not want to load a theme because it is
incompatible with powerline. So I simply overwrite =sml/-setup-theme=
with =ignore=.
#+begin_src emacs-lisp :noweb-ref powerline-config :tangle no
(use-package smart-mode-line
:config
(advice-add 'sml/-setup-theme :around #'ignore)
(sml/setup))
#+end_src
*** rich-minority
I use rich-minority-mode, that has no support for powerline out of the
box. So I advice the =powerline-minor-modes= function and let
rich-minority temporarily overwrite the minor-mode-alist.
#+begin_src emacs-lisp :noweb-ref powerline-config :tangle no
(defun alex/powerline-rm-setup ()
(defun alex/powerline-rm (orig-fun &rest args)
"Applies the rich-minority-mode on the powerline display of the
minor-modes."
(let ((minor-mode-alist (if rich-minority-mode
(rm--mode-list-as-string-list)
minor-mode-alist)))
(apply orig-fun args)))
(advice-add 'powerline-minor-modes :around #'alex/powerline-rm))
(eval-after-load 'rich-minority #'alex/powerline-rm-setup)
#+end_src
*** powerline theme
Setup the powerline theme. Currently I only change the separator and
make it a little bit higher.
#+begin_src emacs-lisp :noweb-ref powerline-config :tangle no
(setq powerline-default-separator 'wave
powerline-height 25)
(powerline-default-theme)
#+end_src
** projectile
Projectile allows fast search for files in project directories. I want
to use it everywhere but do not want to see the minor-mode. It
automatically recognize git repositories as projects.
#+begin_src emacs-lisp
(use-package projectile
:diminish " Projectile.*"
:config
(projectile-global-mode)
(setq projectile-enable-caching t
projectile-cache-file (alex/cache-file "projectile")
projectile-known-projects-file (alex/cache-file "projectile-bookmarks")))
#+end_src
** semantic
semantic is an emacs mode, that parses the source code of the current
buffer. It has support for many languages out of the box (C/C++,
Python, elisp, Erlang...). I want to enable it in all buffers. The
only disadvantage is, that opening a file could trigger the parsing
and will block emacs for a while (depending on how many files are in
the including hierarchy).
#+begin_src emacs-lisp
(use-package semantic
:config
(use-package semantic/ia)
(setq semanticdb-default-save-directory (alex/cache-file "semantic"))
(semantic-mode 1)
(global-semantic-idle-summary-mode 1))
#+end_src
** server
Start server (if not running) to edit files with emacsclient and
rebind =C-x k= in server buffers to close it.
#+begin_src emacs-lisp
(use-package server
:config
(when (and (fboundp 'server-running-p)
(not (server-running-p)))
(server-start))
(defun alex/server-swtich-hook ()
(when (current-local-map)
(use-local-map (copy-keymap (current-local-map))))
(when server-buffer-clients
(local-set-key (kbd "C-x k") 'server-edit)))
(add-hook 'server-switch-hook 'alex/server-swtich-hook))
#+end_src
** smartparens
smartparens-mode has various features. I only want to have the
highlighting of matching parens and the automatic wrapping of the
region, but I do not want that it inserts, deletes or skips some
parens.
#+begin_src emacs-lisp
(use-package smartparens-config
:config
(setq-default sp-autoinsert-pair nil
sp-autodelete-pair nil
sp-autodelete-opening-pair nil
sp-autodelete-closing-pair nil
sp-autoskip-closing-pair nil)
(smartparens-global-mode t)
(show-smartparens-global-mode t)
:diminish
" SP")
#+end_src
** template
I want to insert template automatically in new empty files with the
correct extension. But I only want to search for global templates by
default and not in a sub directory of the new file. I also do not want
to update the content of a file after saving (f.e. when saving under a
different name).
#+begin_src emacs-lisp
(use-package template
:config
(setq template-auto-insert t
template-auto-update nil
template-confirm-insecure nil
template-date-format "%Y-%m-%d"
template-time-format "%T"
template-subdirectories nil
template-default-directories (list (concat user-emacs-directory
"templates/")))
(template-initialize))
#+end_src
** tramp
I usually have very heavy shell customization on remote hosts. I do
not want to depend, that tramp can parse my custom prompt format. So I
set =sshx= as default tramp method, that explicit invoke =/bin/sh= as
shell on the remote host.
#+begin_src emacs-lisp
(use-package tramp
:config
(setq tramp-default-method "sshx"
tramp-persistency-file-name (alex/cache-file "tramp")))
#+end_src
*** dir-locals
Support dir-locals also via tramp. This leads to a additional delay
while opening a file via tramp (because it has to check for the
dir-locals file over ssh) but usually I do not want to clutter single
files with file-local variables.
#+begin_src emacs-lisp
(setq enable-remote-dir-locals t)
#+end_src
** uniquify
Use a better approach to make unique buffer names. The default
algorithm just adds a count after the filename if you opened two files
with the same name. =uniquify= adds the path to the buffer name, so
that the right buffer is easier to identify.
#+begin_src emacs-lisp
(use-package uniquify
:config
(setq uniquify-buffer-name-style 'reverse))
#+end_src
** uptimes
I want to measure the uptime of emacs. This should not be deferred
loaded, because it captures the start time of in the moment it gets
loaded.
#+begin_src emacs-lisp
(use-package uptimes
:demand t
:config
(setq uptimes-database (alex/cache-file "uptimes")))
#+end_src
** weechat
#+begin_src emacs-lisp
(use-package weechat
:commands (weechat-connect)
:functions (weechat-channel-names
weechat-monitor-buffer
weechat--find-buffer
weechat-buffer-hash)
:init
(defun weechat ()
"Start weechat with `weechat-connect' and automatically switch to
the first buffer in `weechat-auto-monitor-buffers'."
(interactive)
(weechat-connect)
(when weechat-auto-monitor-buffers
(switch-to-buffer
(car weechat-auto-monitor-buffers))))
:config
<<weechat-config>>)
#+end_src
*** config
I connect to weechat running on the host called =island= via ssh
tunneling, monitor only a few buffers by default and close the buffers
on disconnect.
#+begin_src emacs-lisp :noweb-ref weechat-config :tangle no
(setq weechat-buffer-kill-buffers-on-disconnect t
weechat-host-default "is.zedat.fu-berlin.de"
weechat-port-default 58224
weechat-mode-default "ssh -W localhost:%p %h"
weechat-text-column 25
weechat-header-line-format "%c/%s: %t"
weechat-auto-monitor-buffers '("freenode.#spline"
"ircnet.&ZEDAT-IS"
"oftc.#vserver"))
(defun alex/weechat-mode-hook ()
"Activate `visual-line-mode'."
(visual-line-mode 1))
(add-hook 'weechat-mode-hook 'alex/weechat-mode-hook)
#+end_src
*** helm support
#+begin_src emacs-lisp :noweb-ref weechat-config :tangle no
(defun alex/helm-weechat-support ()
(defun alex/weechat-new-buffers ()
(let ((current (weechat-channel-names t))
(all (weechat-channel-names nil)))
(mapc (lambda (cur) (setq all (delete cur all))) current)
(sort all 'string-lessp)))
(defun alex/weechat-add-buffer (name)
(weechat-monitor-buffer (weechat--find-buffer name) t))
(defun alex/weechat-get-count (channel type)
(let ((hash (gethash type channel)))
(if (not (not hash))
(gethash :count hash)
0)))
(defun alex/weechat-show-topic (channels)
(mapcar
(lambda (channel)
(let* ((hash (weechat-buffer-hash (weechat--find-buffer channel)))
(hlight (alex/weechat-get-count hash :background-highlight))
(message (alex/weechat-get-count hash :background-message))
(chan-name (if (> (string-width channel) helm-buffer-max-length)
(helm-substring-by-width
channel helm-buffer-max-length)
(concat channel (make-string
(- (+ helm-buffer-max-length 3)
(string-width channel)) ? ))))
(chan (cond
((> hlight 0)
(propertize chan-name 'face 'helm-buffer-saved-out))
((> message 0)
(propertize chan-name 'face 'helm-buffer-not-saved))
(t chan-name)))
(hlight-count (if (> hlight 0)
(propertize (format "%-3d" hlight)
'face 'helm-buffer-saved-out)
" "))
(message-count (if (> message 0)
(format "%3d" message) " "))
(count-sep (if (and (> message 0) (> hlight 0))
"," " "))
(topic (propertize
(gethash "title" hash)
'face 'helm-ff-symlink)))
(cons (format "%s\t%s%s%s\t%s" chan message-count count-sep
hlight-count topic)
channel)))
channels))
(defun alex/weechat-ignore-buffer (channels)
(delq nil
(mapcar
(lambda (channel)
(let* ((hash (weechat-buffer-hash (weechat--find-buffer channel)))
(plugin (cdr (assoc "plugin" (gethash "local_variables" hash))))
(type (cdr (assoc "type" (gethash "local_variables" hash)))))
(when (and (string= "irc" plugin) (string= "channel" type))
channel)))
channels)))
(defun alex/helm-weechat-buffer-toggle-ignore ()
(interactive)
(with-helm-alive-p
(let ((filter-attrs (helm-attr 'candidate-transformer
alex/weechat-new-buffers-source)))
(if (memq 'alex/weechat-ignore-buffer filter-attrs)
(helm-attrset 'candidate-transformer
(remove 'alex/weechat-ignore-buffer
filter-attrs)
alex/weechat-new-buffers-source t)
(helm-attrset 'candidate-transformer
(cons 'alex/weechat-ignore-buffer
filter-attrs)
alex/weechat-new-buffers-source t))
(helm-force-update))))
(setq alex/helm-weechat-buffer-map (copy-keymap helm-map))
(bind-key "C-c C-c" 'alex/helm-weechat-buffer-toggle-ignore
alex/helm-weechat-buffer-map)
(setq alex/weechat-new-buffers-source nil)
(defun alex/helm-weechat-buffer ()
(interactive)
(setq alex/weechat-new-buffers-source
(helm-build-sync-source "Available channel"
:candidates (alex/weechat-new-buffers)
:action '(("Monitor channel" . alex/weechat-add-buffer))
:candidate-transformer '(alex/weechat-ignore-buffer
alex/weechat-show-topic)))
(let ((helm-truncate-lines t))
(helm
:sources (list
(helm-build-sync-source "Buffers"
:candidates (weechat-channel-names t)
:action '(("Open buffer" . switch-to-buffer))
:candidate-transformer '(alex/weechat-show-topic))
alex/weechat-new-buffers-source)
:buffer "*weechat*"
:keymap alex/helm-weechat-buffer-map)))
(bind-key "C-c C-b" 'alex/helm-weechat-buffer weechat-mode-map)
(defun alex/mark-read ()
"Mark buffer as read up to current line."
(interactive)
(let ((inhibit-read-only t))
(put-text-property
(point-min) (line-beginning-position)
'face 'font-lock-comment-face)))
(bind-key "<escape>" 'alex/mark-read weechat-mode-map))
(eval-after-load 'helm #'alex/helm-weechat-support)
#+end_src
** which-key
I cannot remember all the key combinations. which-key will show a
hint for possible completions, if I start a key combo and wait longer
than 1s before continue with the next key.
#+begin_src emacs-lisp
(use-package which-key
:config
(setq which-key-idle-delay 1.0)
(which-key-mode t)
:diminish
which-key-mode)
#+end_src
** winner
I use winner to quickly restore a previous window configuration after
it was changed by something. I demand it here, because winner mode
need to be active to keep track of the changes and helm will notice it
and will insert the helm buffer names into =winner-boring-buffers=.
#+begin_src emacs-lisp
(use-package winner
:bind (("C-c <left>" . winner-undo)
("C-c <right>" . winner-redo))
:demand t
:config
(winner-mode 1))
#+end_src
** winring
With winring it is possible to manage different window configurations
and switching between. This could be useful if working with
specialized window configurations (f.e. for debugging) and activating
it when needed.
#+begin_src emacs-lisp
(use-package winring
:bind (("C-x j" . winring-jump-to-configuration)
("C-x n" . winring-new-configuration)
("C-x K" . winring-delete-configuration))
:functions (winring-initialize)
:config
(winring-initialize)
(defun alex/confirm-winring-deletion (&rest args)
(y-or-n-p (format "Delete winring configuration %s? " winring-name)))
(advice-add 'winring-delete-configuration
:before-while
#'alex/confirm-winring-deletion))
#+end_src
** wl
Here are only the functions for auto-loading. I customize wanderlust,
to load the profile from the org-babel file =init.d/wl.org= during
start-up of wanderlust.
I use a separate frame for wanderlust with a custom name, so that
XMonad can shift it to a different desktop. Additionally I create
a function, that should be called with emacsclient to compose a new
message from a mailto link. This function also creates a new frame
with a custom name and closes it after sending the mail.
#+begin_src emacs-lisp
(use-package wl
:commands (wl-other-frame wl-draft)
:init
(defun wl-start ()
"Start wanderlust in a seperate frame and set the name of the new
frame to `wanderlust'."
(interactive)
(let ((default-frame-alist
(cons '(name . "wanderlust") default-frame-alist)))
(wl-other-frame)))
(defun alex/wl-mailto-compose-new-frame (mailto-url)
"Compose a new mail from a mailto link with wanderlust in a new
frame and customize the name of the new frame to
`wanderlust-draft'."
(let ((default-frame-alist
(cons '(name . "wanderlust-draft") default-frame-alist))
(wl-draft-use-frame t))
(alex/wl-mailto-compose mailto-url)
(set-window-dedicated-p (selected-window) t)
(make-local-variable 'wl-draft-force-delete-frame)
(setq wl-draft-force-delete-frame t)
(run-hooks 'wl-mail-setup-hook)))
(require 'rfc2368)
(defun alex/wl-mailto-compose (mailto-url)
"Parse a rfc2368 mailto links and call `wl-draft' with the
information for the headers and the body."
(when (and (stringp mailto-url) (string-match "\\`mailto:" mailto-url))
(let* ((headers (mapcar (lambda (h) (cons (intern (car h)) (cdr h)))
(rfc2368-parse-mailto-url mailto-url)))
(good-headers (assq-delete-all 'Body (copy-alist headers)))
(body (cdr (assoc 'Body headers))))
(wl-draft good-headers nil nil body))))
(defvar wl-draft-force-delete-frame nil
"If this variable is t `alex/wl-draft-force-hide' always delete
the frame after closing the draft. You may want to make this
variable buffer-local whenever you use it. This variable is used by
`alex/wl-mailto-compose-new-frame' to close the created frame after
composing the mail.")
(defun alex/wl-draft-force-hide (func &rest args)
"This advice removes the draft-frame even if no other frame is
visible if `alex/wl-draft-force-delete-frame' is non-nil."
(let ((force-delete (and (boundp 'wl-draft-force-delete-frame)
wl-draft-force-delete-frame)))
(apply func args)
(if force-delete
(delete-frame))))
(advice-add 'wl-draft-hide :around #'alex/wl-draft-force-hide)
:config
(defun alex/wl-babel-load-profile ()
"Load `wl-init-file' with `org-babel-load-file'."
(org-babel-load-file wl-init-file))
(setq wl-init-file (locate-user-emacs-file "init.d/wl.org")
wl-load-profile-function 'alex/wl-babel-load-profile))
#+end_src
** yasnippet
I want to use yasnippets everywhere, so I enable the global mode. In
addition to the default snippets I have some in my personal dir. It
does not load the all snippets during startup, but only if the first
buffer switches to the corresponding mode (only the directories are
searched during activation of the global mode).
#+begin_src emacs-lisp
(use-package yasnippet
:config
(setq yas-snippet-dirs `("~/.emacs.d/snippets/"
,yas-installed-snippets-dir))
(yas-global-mode 1)
:diminish yas-minor-mode)
#+end_src
