aboutsummaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/mpd.conf.590
1 files changed, 44 insertions, 46 deletions
diff --git a/doc/mpd.conf.5 b/doc/mpd.conf.5
index 88c9a6d85..3dc4b0e2e 100644
--- a/doc/mpd.conf.5
+++ b/doc/mpd.conf.5
@@ -55,8 +55,7 @@ the "kill" command. When mpd is restarted, it will read the state file and
restore the state of mpd (including the playlist).
.TP
.B audio_output
-See \fBREQUIRED AUDIO OUTPUT PARAMETERS\fP and \fBOPTIONAL AUDIO OUTPUT
-PARAMETERS\fP.
+See the various \fBAUDIO OUTPUT PARAMETERS\fP sections below.
.TP
.B audio_output_format <sample_rate:bits:channels>
This specifies the sample rate, bits per sample, and number of channels of
@@ -187,10 +186,8 @@ when saving playlists. The default is "no".
.SH REQUIRED AUDIO OUTPUT PARAMETERS
.TP
.B type <type>
-This specifies the audio output type. Depending on what audio output support
-mpd was built with possible values could be "alsa", "oss", "osx", "pulse",
-"mvp", "ao", or "shout" (see \fBREQUIRED SHOUT OUTPUT PARAMETERS\fP and
-\fBOPTIONAL SHOUT OUTPUT PARAMETERS\fP).
+This specifies the audio output type. See the list of supported outputs in mpd
+--version for possible values.
.TP
.B name <name>
This specifies a unique name for the audio output.
@@ -201,61 +198,62 @@ This specifies the sample rate, bits per sample, and number of channels of
audio that is sent to the audio output device. See documentation for the
\fBaudio_output_format\fP parameter for more details. The default is to use
whatever audio format is passed to the audio output.
+.SH OPTIONAL ALSA OUTPUT PARAMETERS
+.TP
+.B device <dev>
+This specifies the device to use for audio output. The default is "hw:0,0".
+.TP
+.B use_mmap <yes or no>
+Setting this allows you to use memory-mapped I/O. Certain hardware setups may
+benefit from this, but most do not. Most users do not need to set this.
+.TP
+.B buffer_time <time in microseconds>
+This sets the length of the hardware sample buffer in microseconds. Increasing
+it may help to reduce or eliminate skipping on certain setups. Most users do
+not need to change this. The default is 500000 microseconds (0.5 seconds).
+.TP
+.B period_time <time in microseconds>
+This sets the time between hardware sample transfers in microseconds.
+Increasing this can reduce CPU usage while lowering it can reduce underrun
+errors on bandwidth-limited devices. Some users have reported good results
+with this set to 50000, but not all devices support values this high. Most
+users do not need to change this. The default is 256000000 / sample_rate(kHz),
+or 5804 microseconds for CD-quality audio.
+.SH OPTIONAL OSS OUTPUT PARAMETERS
.TP
.B device <dev>
-This specifies the device to use for audio output. Used by the alsa and oss
-output types. The default for oss is "/dev/dsp"; the default for alsa is
-"hw:0,0".
+This specifies the device to use for audio output. The default is "/dev/dsp".
+.SH OPTIONAL PULSE OUTPUT PARAMETERS
.TP
.B server <server list>
-A space separated list of servers to try to connect to. Used only by the pulse
-audio output. See <\fBhttp://www.pulseaudio.org/wiki/ServerStrings\fP> for
-more details. The default is to let PulseAudio choose a server.
+A space separated list of servers to try to connect to. See
+<\fBhttp://www.pulseaudio.org/wiki/ServerStrings\fP> for more details. The
+default is to let PulseAudio choose a server.
.TP
.B sink <sink>
-The sink to output to. Used only by the pulse audio output. The default is to
-let PulseAudio choose a sink.
+The sink to output to. The default is to let PulseAudio choose a sink.
+.SH OPTIONAL AO OUTPUT PARAMETERS
.TP
.B driver <driver>
-This specifies the libao driver to use for audio output. Used only by the ao
-output type. Possible values depend on what libao drivers are available. See
+This specifies the libao driver to use for audio output. Possible values
+depend on what libao drivers are available. See
<\fBhttp://www.xiph.org/ao/doc/drivers.html\fP> for information on some
commonly used drivers. Typical values for Linux include "oss" and "alsa09".
The default is "default", which causes libao to select an appropriate plugin.
.TP
.B options <opts>
-This specifies the options to use for the selected libao driver. Used only by
-the ao output type. For oss, the only option available is "dsp". For alsa09,
-the available options are: "dev", "buf_size", and "periods". See
-<\fBhttp://www.xiph.org/ao/doc/drivers.html\fP> for available options for some
-commonly used drivers. Options are assigned using "=", and ";" is used to
-separate options. An example for oss: "dsp=/dev/dsp". An example for alsa09:
-"dev=hw:0,0;buf_size=4096". The default is "".
+This specifies the options to use for the selected libao driver. For oss, the
+only option available is "dsp". For alsa09, the available options are: "dev",
+"buf_size", and "periods". See <\fBhttp://www.xiph.org/ao/doc/drivers.html\fP>
+for available options for some commonly used drivers. Options are assigned
+using "=", and ";" is used to separate options. An example for oss:
+"dsp=/dev/dsp". An example for alsa09: "dev=hw:0,0;buf_size=4096". The
+default is "".
.TP
.B write_size <size in bytes>
-This specifies how many bytes to write to the audio device at once. Used only
-by the ao output type. This parameter is to work around a bug in older
-versions of libao on sound cards with very small buffers. The default is 1024.
-.SH OPTIONAL ALSA OUTPUT PARAMETERS
-.TP
-.B use_mmap <yes or no>
-Setting this allows you to use memory-mapped I/O. Certain hardware setups
-may benefit from this, but most do not.
-Most users do not need to set this.
-.TP
-.B buffer_time <time in microseconds>
-This sets the length of the hardware sample buffer in microseconds.
-Increasing it may help to reduce or eliminate skipping on certain setups.
-Most users do not need to change this.
-The default is 500000 microseconds (0.5 seconds).
-.TP
-.B period_time <time in microseconds>
-This sets the time between hardware sample transfers in microseconds.
-Increasing this can reduce CPU usage while lowering it can reduce underrun
-errors on bandwidth-limited devices. Some users have reported good results
-with this set to 50000, but not all devices support values this high.
-Most users do not need to change this.
-The default is 256000000 / sample_rate(kHz), or 5804us for CD-quality audio.
+This specifies how many bytes to write to the audio device at once. This
+parameter is to work around a bug in older versions of libao on sound cards
+with very small buffers. The default is 1024.
.SH REQUIRED SHOUT OUTPUT PARAMETERS
.TP
.B name <name>