# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Required files and directories ##############################################
#
# From this directory MPD will discover the available audio files and add them
# to the daemon's online database.
#
music_directory "~/music"
#
# This is the MPD internal playlist directory. This directory is not intended
# for preexisting playlists which were not created by MPD.
#
playlist_directory "~/.mpd/playlists"
#
# This is the database file. This holds MPDs audio file locations when the
# daemon is down.
#
db_file "~/.mpd/database"
#
# The log files for the daemon. Great for troubleshooting, depending on your
# log_level.
#
log_file "~/.mpd/log"
error_file "~/.mpd/error-log"
###############################################################################
# Optional files ##############################################################
#
# This file is required for mpd --kill, and some init script, usage.
#
#pid_file "~/.mpd/pid"
#
# This file contains information about most variables to get MPD back into the
# same general shape it was in before it was brought down. This file must be
# specified to utilize this feature.
#
#state_file "~/.mpd/state"
#
###############################################################################
# General music daemon options ################################################
#
# This specifies the user that MPD will run as, if set. MPD should
# never run as root, and you may use this option to make MPD change
# its user id after initialization. Do not use this option if you
# start MPD as an unprivileged user.
#
#user "nobody"
#
# The address for the daemon to listen on. Careful attention should be paid
# if this is assigned to anything other then the default, any. This option can
# deny access to control of the daemon.
#
# For network
#bind_to_address "any"
#
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
#
# The port that is desired for the daemon to get assigned to.
#
#port "6600"
#
# Controls the type of information which is logged. Available options are
# "default", "secure" or "verbose". The verbose option recommended
# for troubleshooting, though can quickly stretch available resources on
# limited hardware.
#
#log_level "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback "yes"
#
# Enable this have MPD create playlists in a format usable by other music
# players.
#
#save_absolute_paths_in_playlists "no"
#
# A list of tag types that MPD will discover during audio file discovery.
# Optionally, comments can be added to this list.
#
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
#
###############################################################################
# Symbolic link behavior ######################################################
#
# Allow MPD to discover audio files by following symbolic links outside of the
# configured music_directory.
#
#follow_outside_symlinks "yes"
#
# Allow MPD to discover audio files by following symbolic links inside of the
# configured music_directory.
#
#follow_inside_symlinks "yes"
#
###############################################################################
# Zeroconf / Avahi Service Discovery ##########################################
#
# If yes, service information will be published with Zeroconf / Avahi.
#
#zeroconf_enabled "yes"
#
# The unique name for this MPD server for your network.
#
#zeroconf_name "Music Player"
#
###############################################################################
# Permissions #################################################################
#
# MPD can require password authorization. This can be specified multiple times
# for different user profiles.
#
#password "password@read,add,control,admin"
#
# This specifies the permissions a user has who has not yet logged in.
#
#default_permissions "read,add,control,admin"
#
###############################################################################
# Audio Output ################################################################
#
# MPD supports many audio output types, as well as playing
# through multiple audio outputs at the same time. You can
# specify one or more here. If you don't specify any, MPD will
# automatically scan for a usable audio output.
#
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs>
# for examples of other audio outputs.
#
# An example of an ALSA output:
#
#audio_output {
# type "alsa"
# name "My ALSA Device"
# device "hw:0,0" # optional
# format "44100:16:2" # optional
#}
#
# An example of an OSS output:
#
#audio_output {
# type "oss"
# name "My OSS Device"
# device "/dev/dsp" # optional
# format "44100:16:2" # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
# protocol "icecast2" # optional
# user "source" # optional
# description "My Stream Description" # optional
# genre "jazz" # optional
# public "no" # optional
# timeout "2" # optional
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
# type "pulse"
# name "My Pulse Output"
# server "remote_server"
# sink "remote_server_sink"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
# type "null"
# name "My Null Output"
#}
#
# Force all decoded audio to be converted to this format before being passed
# to the audio outputs. By default, this option is disabled.
#
#audio_output_format "44100:16:2"
#
# If MPD has been compiled with libsamplerate support, this specifies the
# sample rate converter to use. Possible values can be found in the mpd.conf
# man page or the libsamplerate documentation. By default, this is option is
# disabled.
#
#samplerate_converter "Fastest Sinc Interpolator"
#
###############################################################################
# Volume control mixer ########################################################
#
# MPD has limited volume controls, to use them pick one below. If one is not
# specified it may be autodetected at startup, depending on available options.
#
# An example for controlling an ALSA mixer:
#
#mixer_type "alsa"
#mixer_device "default"
#mixer_control "PCM"
#
# An example for controlling an OSS mixer:
#
#mixer_type "oss"
#mixer_device "/dev/mixer"
#mixer_control "PCM"
#
# This example is a general volume control mixer, it is used to adjust the
# volume of the audio sent to the audio output.
#
#mixer_type "software"
#
###############################################################################
# Normalization automatic volume adjustments ##################################
#
# Specifies the type of ReplayGain to use. This option can either be "album" or
# "track". See <http://www.replaygain.org> for more details. If this option is
# unset it is disabled.
#
#replaygain "album"
#
# Sets the pre-amp used for files that have ReplayGain tags, if enabled.
#
#replaygain_preamp "0"
#
# Enable on-the-fly normalization volume adjustment. This will result in the
# volume of all playing audio to be adjusted so the output has equal
# "loudness".
#
#volume_normalization "no"
#
###############################################################################
# MPD Internal Buffering ######################################################
#
# The size of internal decoded audio buffering. Changing this can have
# ill effects. Don't change this if you don't know what you are doing.
#
#audio_buffer_size "2048"
#
# The percent of the buffer to fill before beginning to play. Increasing this
# reduces the chance of audio file skipping, but increases the time before
# audio playback.
#
#buffer_before_play "10%"
#
###############################################################################
# HTTP Streaming Proxy ########################################################
#
# Specifies the HTTP proxy to use for playing HTTP streams. By default, these
# options will be disabled.
#
#http_proxy_host "proxy.isp.com"
#http_proxy_port "8080"
#http_proxy_user "user"
#http_proxy_password "password"
#
###############################################################################
# Resource Limitations ########################################################
#
# These are various limitations to prevent MPD from using too many resources.
# Generally, these options should be minimized to prevent security risks,
# depending on the operating resources.
#
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
#
###############################################################################
# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your local then you
# may need to modify this option. After option modification mpd --create-db
# must be run.
#
#filesystem_charset "UTF-8"
#
# The encoding that ID3v1 tags should be converted from.
#
#id3v1_encoding "ISO-8859-1"
#
###############################################################################
