# Polish translation for Mailman # Copyleft protected by GNU/GPL # BArtosz Sawicki , 2002-2005 # Marcin Sochacki , 2001-2002. # Zbigniew Szalbot , 2008-2009 msgid "" msgstr "" "Project-Id-Version: Mailman 2.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: Fri May 2 21:50:40 2014\n" "PO-Revision-Date: 2009-02-05 23:29+0100\n" "Last-Translator: Zbigniew Szalbot \n" "Language-Team: Polish \n" "Language: pl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-2\n" "Content-Transfer-Encoding: 8bit\n" #: Mailman/Archiver/HyperArch.py:123 msgid "size not available" msgstr "rozmiar nie znany" #: Mailman/Archiver/HyperArch.py:129 msgid " %(size)i bytes " msgstr " %(size)i bajtów " #: Mailman/Archiver/HyperArch.py:289 Mailman/Archiver/HyperArch.py:292 #: Mailman/Archiver/HyperArch.py:423 Mailman/Archiver/HyperArch.py:481 #: Mailman/Archiver/HyperArch.py:590 Mailman/Archiver/HyperArch.py:1064 #: Mailman/Archiver/HyperArch.py:1193 msgid " at " msgstr " w " #: Mailman/Archiver/HyperArch.py:510 msgid "Previous message:" msgstr "Poprzednia wiadomość:" #: Mailman/Archiver/HyperArch.py:532 msgid "Next message:" msgstr "Następna wiadomość:" #: Mailman/Archiver/HyperArch.py:705 Mailman/Archiver/HyperArch.py:741 msgid "thread" msgstr "wątku" #: Mailman/Archiver/HyperArch.py:706 Mailman/Archiver/HyperArch.py:742 msgid "subject" msgstr "tematu" #: Mailman/Archiver/HyperArch.py:707 Mailman/Archiver/HyperArch.py:743 msgid "author" msgstr "autora" #: Mailman/Archiver/HyperArch.py:708 Mailman/Archiver/HyperArch.py:744 msgid "date" msgstr "daty" #: Mailman/Archiver/HyperArch.py:780 msgid "

Currently, there are no archives.

" msgstr "

W tej chwili nie ma archiwum.

" #: Mailman/Archiver/HyperArch.py:818 msgid "Gzip'd Text%(sz)s" msgstr "Tekst Gzipowany%(sz)s" #: Mailman/Archiver/HyperArch.py:823 msgid "Text%(sz)s" msgstr "Tekst%(sz)s" #: Mailman/Archiver/HyperArch.py:913 msgid "figuring article archives\n" msgstr "skanowanie wiadomości do archiwum\n" #: Mailman/Archiver/HyperArch.py:923 msgid "April" msgstr "Kwiecień" #: Mailman/Archiver/HyperArch.py:923 msgid "February" msgstr "Luty" #: Mailman/Archiver/HyperArch.py:923 msgid "January" msgstr "Styczeń" #: Mailman/Archiver/HyperArch.py:923 msgid "March" msgstr "Marzec" #: Mailman/Archiver/HyperArch.py:924 msgid "August" msgstr "Sierpień" #: Mailman/Archiver/HyperArch.py:924 msgid "July" msgstr "Lipiec" #: Mailman/Archiver/HyperArch.py:924 msgid "June" msgstr "Czerwiec" #: Mailman/Archiver/HyperArch.py:924 Mailman/i18n.py:107 msgid "May" msgstr "Maj" #: Mailman/Archiver/HyperArch.py:925 msgid "December" msgstr "Grudzień" #: Mailman/Archiver/HyperArch.py:925 msgid "November" msgstr "Listopad" #: Mailman/Archiver/HyperArch.py:925 msgid "October" msgstr "Październik" #: Mailman/Archiver/HyperArch.py:925 msgid "September" msgstr "Wrzesień" #: Mailman/Archiver/HyperArch.py:933 msgid "First" msgstr "Pierwszy" #: Mailman/Archiver/HyperArch.py:933 msgid "Fourth" msgstr "Czwarty" #: Mailman/Archiver/HyperArch.py:933 msgid "Second" msgstr "Drugi" #: Mailman/Archiver/HyperArch.py:933 msgid "Third" msgstr "Trzeci" #: Mailman/Archiver/HyperArch.py:935 msgid "%(ord)s quarter %(year)i" msgstr "%(ord)s kwartał %(year)i" #: Mailman/Archiver/HyperArch.py:942 msgid "%(month)s %(year)i" msgstr "%(month)s %(year)i" #: Mailman/Archiver/HyperArch.py:947 msgid "The Week Of Monday %(day)i %(month)s %(year)i" msgstr "Tydzień zaczynający się od poniedziałku %(day)i %(month)s %(year)i" #: Mailman/Archiver/HyperArch.py:951 msgid "%(day)i %(month)s %(year)i" msgstr "%(day)i %(month)s %(year)i" #: Mailman/Archiver/HyperArch.py:1051 msgid "Computing threaded index\n" msgstr "Obliczanie listy wątków\n" #: Mailman/Archiver/HyperArch.py:1316 msgid "Updating HTML for article %(seq)s" msgstr "Aktualizacja pliku HTML dla wiadomości %(seq)s" #: Mailman/Archiver/HyperArch.py:1323 msgid "article file %(filename)s is missing!" msgstr "brakuje pliku archiwum %(filename)s !" #: Mailman/Archiver/pipermail.py:180 Mailman/Archiver/pipermail.py:181 msgid "No subject" msgstr "Brak tematu" #: Mailman/Archiver/pipermail.py:288 msgid "Creating archive directory " msgstr "Tworzenie katalogu archiwum " #: Mailman/Archiver/pipermail.py:300 msgid "Reloading pickled archive state" msgstr "Ładowanie poprzedniego stanu archiwum" #: Mailman/Archiver/pipermail.py:327 msgid "Pickling archive state into " msgstr "Zapisywanie stanu archiwum do " #: Mailman/Archiver/pipermail.py:439 msgid "Updating index files for archive [%(archive)s]" msgstr "Aktualizacja indeksów z archiwum [%(archive)s]" #: Mailman/Archiver/pipermail.py:472 msgid " Thread" msgstr " Wątek" #: Mailman/Archiver/pipermail.py:583 msgid "#%(counter)05d %(msgid)s" msgstr "#%(counter)05d %(msgid)s" #: Mailman/Bouncer.py:45 msgid "due to excessive bounces" msgstr "z powodu zbyt wielu zwrotów" #: Mailman/Bouncer.py:46 msgid "by yourself" msgstr "przez Ciebie samego" #: Mailman/Bouncer.py:47 msgid "by the list administrator" msgstr "przez administratora listy" #: Mailman/Bouncer.py:48 Mailman/Bouncer.py:286 #: Mailman/Commands/cmd_set.py:182 msgid "for unknown reasons" msgstr "z nieznanego powodu" #: Mailman/Bouncer.py:233 msgid "disabled" msgstr "zablokowana" #: Mailman/Bouncer.py:238 msgid "Bounce action notification" msgstr "Powiadamianie o zwrotach" #: Mailman/Bouncer.py:293 msgid " The last bounce received from you was dated %(date)s" msgstr " Ostatni zwrot otrzymano z Twojego adresu dnia %(date)s" #: Mailman/Bouncer.py:322 Mailman/Deliverer.py:144 #: Mailman/Handlers/Acknowledge.py:44 Mailman/Handlers/CookHeaders.py:333 #: Mailman/Handlers/Hold.py:215 Mailman/Handlers/ToDigest.py:240 #: Mailman/ListAdmin.py:223 msgid "(no subject)" msgstr "(brak tematu)" #: Mailman/Bouncer.py:326 msgid "[No bounce details are available]" msgstr "[brak opisu zwrotu]" #: Mailman/Cgi/Auth.py:48 msgid "Moderator" msgstr "Moderator" #: Mailman/Cgi/Auth.py:50 msgid "Administrator" msgstr "Administrator" #: Mailman/Cgi/admin.py:79 Mailman/Cgi/admindb.py:116 #: Mailman/Cgi/confirm.py:62 Mailman/Cgi/edithtml.py:71 #: Mailman/Cgi/listinfo.py:55 Mailman/Cgi/options.py:78 #: Mailman/Cgi/private.py:108 Mailman/Cgi/rmlist.py:64 #: Mailman/Cgi/roster.py:59 Mailman/Cgi/subscribe.py:63 msgid "No such list %(safelistname)s" msgstr "Nie znaleziono listy %(safelistname)s" #: Mailman/Cgi/admin.py:108 Mailman/Cgi/admindb.py:132 #: Mailman/Cgi/edithtml.py:91 Mailman/Cgi/private.py:135 msgid "Authorization failed." msgstr "Błąd uwierzytelniania." #: Mailman/Cgi/admin.py:199 msgid "The form lifetime has expired. (request forgery check)" msgstr "" #: Mailman/Cgi/admin.py:205 msgid "" "You have turned off delivery of both digest and\n" " non-digest messages. This is an incompatible state of\n" " affairs. You must turn on either digest delivery or\n" " non-digest delivery or your mailing list will basically be\n" " unusable." msgstr "" "Wyłączyłeś dostarczanie poczty zarówno w trybie listów\n" " jak i w trybie paczek. Jest to niepożądana sytuacja.\n" " Musisz włączyć jeden z wymienionych trybów; inaczej\n" " lista będzie bezużyteczna." #: Mailman/Cgi/admin.py:209 Mailman/Cgi/admin.py:217 Mailman/Cgi/admin.py:224 #: Mailman/Cgi/admin.py:1498 Mailman/Gui/GUIBase.py:207 msgid "Warning: " msgstr "Uwaga: " #: Mailman/Cgi/admin.py:214 msgid "" "You have digest members, but digests are turned\n" " off. Those people will not receive mail.\n" " Affected member(s) %(dm)r." msgstr "" "Istnieją prenumeratorzy z włączonym trybem paczek,\n" " a wyłączyłeś go globalnie. Ci ludzie nie\n" " będą otrzymywać poczty.%(dm)r" #: Mailman/Cgi/admin.py:221 msgid "" "You have regular list members but non-digestified mail is\n" " turned off. They will receive non-digestified mail until " "you\n" " fix this problem. Affected member(s) %(rm)r." msgstr "" "Istnieją subskrybenci z włączonym trybem normalnym,\n" " a wyłączyłeś go globalnie. Ci ludzie nie\n" " będą otrzymywać poczty dopóki ten problem\n" " nie zostanie usunięty.%(rm)r" #: Mailman/Cgi/admin.py:246 msgid "%(hostname)s mailing lists - Admin Links" msgstr "Listy dostępne na serwerze %(hostname)s - Administracja" #: Mailman/Cgi/admin.py:277 Mailman/Cgi/listinfo.py:105 msgid "Welcome!" msgstr "Witamy!" #: Mailman/Cgi/admin.py:280 Mailman/Cgi/listinfo.py:108 msgid "Mailman" msgstr "Mailman" #: Mailman/Cgi/admin.py:284 msgid "" "

There currently are no publicly-advertised %(mailmanlink)s\n" " mailing lists on %(hostname)s." msgstr "" "

Nie ma obecnie żadnych publicznie dostępnych %(mailmanlink)s\n" " list na serwerze %(hostname)s." #: Mailman/Cgi/admin.py:290 msgid "" "

Below is the collection of publicly-advertised\n" " %(mailmanlink)s mailing lists on %(hostname)s. Click on a list\n" " name to visit the configuration pages for that list." msgstr "" "

Poniżej wyświetlono publicznie dostępne\n" " %(mailmanlink)s listy na serwerze %(hostname)s. Kliknij\n" " nazwę listy, aby przejść do jej konfiguracji. " #: Mailman/Cgi/admin.py:297 msgid "right " msgstr "prawo " #: Mailman/Cgi/admin.py:299 msgid "" "To visit the administrators configuration page for an\n" " unadvertised list, open a URL similar to this one, but with a '/' " "and\n" " the %(extra)slist name appended. If you have the proper authority,\n" " you can also create a new mailing list.\n" "\n" "

General list information can be found at " msgstr "" "Wejście w opcje konfiguracyjne listy ukrytej wymaga utworzenia URL\n" " podobnego do aktualnego, ale ze znakiem '/'\n" " i nazwą %(extra)s listy na końcu. Posiadając odpowiednie " "uprawnienia,\n" " można założyć nową listę.\n" "\n" "

Ogólne dane o listach dostępne są na " #: Mailman/Cgi/admin.py:306 msgid "the mailing list overview page" msgstr "stronie informacyjnej danej listy" #: Mailman/Cgi/admin.py:308 msgid "

(Send questions and comments to " msgstr "

(Pytania i komentarze kieruj do " #: Mailman/Cgi/admin.py:318 Mailman/Cgi/listinfo.py:140 cron/mailpasswds:216 msgid "List" msgstr "Lista" #: Mailman/Cgi/admin.py:319 Mailman/Cgi/admin.py:587 #: Mailman/Cgi/listinfo.py:141 msgid "Description" msgstr "Opis" #: Mailman/Cgi/admin.py:325 Mailman/Cgi/listinfo.py:147 bin/list_lists:124 msgid "[no description available]" msgstr "[brak opisu]" #: Mailman/Cgi/admin.py:359 msgid "No valid variable name found." msgstr "Nie znaleziono prawidłowej nazwy zmiennej." #: Mailman/Cgi/admin.py:369 msgid "" "%(realname)s Mailing list Configuration Help\n" "
%(varname)s Option" msgstr "" "%(realname)s - opis konfiguracji listy\n" "
opcja %(varname)s" #: Mailman/Cgi/admin.py:376 msgid "Mailman %(varname)s List Option Help" msgstr "Opis opcji Mailmana %(varname)s" #: Mailman/Cgi/admin.py:394 msgid "" "Warning: changing this option here\n" " could cause other screens to be out-of-sync. Be sure to reload any " "other\n" " pages that are displaying this option for this mailing list. You can " "also\n" " " msgstr "" "Uwaga: zmiana opcji w tym miejscu\n" " może spowodować, że inne strony będą wyświetlać nieaktualne\n" " informacje. Upewnij się że inne strony zawierające tę opcję\n" " są przeładowane. Możesz też\n" " " #: Mailman/Cgi/admin.py:405 msgid "return to the %(categoryname)s options page." msgstr "powrócić do strony z opcjami %(categoryname)s." #: Mailman/Cgi/admin.py:420 msgid "%(realname)s Administration (%(label)s)" msgstr "%(realname)s - Administracja (%(label)s)" #: Mailman/Cgi/admin.py:421 msgid "%(realname)s mailing list administration
%(label)s Section" msgstr "%(realname)s - Administracja listą
Sekcja %(label)s" #: Mailman/Cgi/admin.py:438 msgid "Configuration Categories" msgstr "Kategorie konfiguracji" #: Mailman/Cgi/admin.py:439 msgid "Other Administrative Activities" msgstr "Inne czynności administracyjne" #: Mailman/Cgi/admin.py:443 msgid "Tend to pending moderator requests" msgstr "Sprawdź kolejkę listów wymagających moderacji" #: Mailman/Cgi/admin.py:445 msgid "Go to the general list information page" msgstr "Przejdź do strony informacyjnej listy" #: Mailman/Cgi/admin.py:447 msgid "Edit the public HTML pages and text files" msgstr "Edytuj publiczne strony WWW i pliki tekstowe" #: Mailman/Cgi/admin.py:449 msgid "Go to list archives" msgstr "Przejdź do archiwum listy" #: Mailman/Cgi/admin.py:455 msgid "Delete this mailing list" msgstr "Usuń tę listę" #: Mailman/Cgi/admin.py:456 msgid " (requires confirmation)
 
" msgstr " (wymaga potwierdzenia)
 
" #: Mailman/Cgi/admin.py:462 Mailman/Cgi/admindb.py:218 #: Mailman/Cgi/admindb.py:295 msgid "Logout" msgstr "Wyloguj się" #: Mailman/Cgi/admin.py:506 msgid "Emergency moderation of all list traffic is enabled" msgstr "" "Awaryjne moderowanie wszystkich wiadomości dla tej listy zostało włączone" #: Mailman/Cgi/admin.py:517 msgid "" "Make your changes in the following section, then submit them\n" " using the Submit Your Changes button below." msgstr "" "Wprowadź zmiany w poniższej sekcji, a następnie zapisz je\n" " naciskając przycisk Zatwierdź." #: Mailman/Cgi/admin.py:535 msgid "Additional Member Tasks" msgstr "Inne zadania związane z prenumeratorami" #: Mailman/Cgi/admin.py:541 msgid "" "

  • Set everyone's moderation bit, including\n" " those members not currently visible" msgstr "" "
  • Ustaw wszystkim znacznik moderowania, łącznie\n" " z aktualnie niewidocznymi prenumeratorami" #: Mailman/Cgi/admin.py:545 msgid "Off" msgstr "Wyłączone" #: Mailman/Cgi/admin.py:545 msgid "On" msgstr "Włączona" #: Mailman/Cgi/admin.py:547 msgid "Set" msgstr "Ustaw" #: Mailman/Cgi/admin.py:588 msgid "Value" msgstr "Wartość" #: Mailman/Cgi/admin.py:642 msgid "" "Badly formed options entry:\n" " %(record)s" msgstr "" "Błędnie sformułowana opcja:\n" " %(record)s" #: Mailman/Cgi/admin.py:700 msgid "Enter the text below, or...
    " msgstr "Wprowadź tekst poniżej lub...
    " #: Mailman/Cgi/admin.py:702 msgid "
    ...specify a file to upload
    " msgstr "
    ...wybierz plik z dysku lokalnego
    " #: Mailman/Cgi/admin.py:728 Mailman/Cgi/admin.py:731 msgid "Topic %(i)d" msgstr "Temat %(i)d" #: Mailman/Cgi/admin.py:732 Mailman/Cgi/admin.py:782 msgid "Delete" msgstr "Usuń" #: Mailman/Cgi/admin.py:733 msgid "Topic name:" msgstr "Temat:" #: Mailman/Cgi/admin.py:735 msgid "Regexp:" msgstr "Wyrażenie regularne:" #: Mailman/Cgi/admin.py:738 Mailman/Cgi/options.py:1053 msgid "Description:" msgstr "Opis:" #: Mailman/Cgi/admin.py:742 Mailman/Cgi/admin.py:800 msgid "Add new item..." msgstr "Dodaj nowy wpis..." #: Mailman/Cgi/admin.py:744 Mailman/Cgi/admin.py:802 msgid "...before this one." msgstr "...powyżej." #: Mailman/Cgi/admin.py:745 Mailman/Cgi/admin.py:803 msgid "...after this one." msgstr "...poniżej." #: Mailman/Cgi/admin.py:778 Mailman/Cgi/admin.py:781 msgid "Spam Filter Rule %(i)d" msgstr "Reguła filtra anty-spamowego %(i)d" #: Mailman/Cgi/admin.py:783 msgid "Spam Filter Regexp:" msgstr "Wyrażenie regularne filtrujące spam:" #: Mailman/Cgi/admin.py:794 Mailman/Cgi/admindb.py:350 #: Mailman/Cgi/admindb.py:409 Mailman/Cgi/admindb.py:463 #: Mailman/Cgi/admindb.py:704 msgid "Defer" msgstr "Odłóż" #: Mailman/Cgi/admin.py:794 Mailman/Cgi/admindb.py:352 #: Mailman/Cgi/admindb.py:411 Mailman/Cgi/admindb.py:463 #: Mailman/Cgi/admindb.py:704 Mailman/Gui/ContentFilter.py:37 #: Mailman/Gui/Privacy.py:221 Mailman/Gui/Privacy.py:244 #: Mailman/Gui/Privacy.py:355 msgid "Reject" msgstr "Odrzuć" #: Mailman/Cgi/admin.py:794 Mailman/Gui/Privacy.py:221 #: Mailman/Gui/Privacy.py:355 msgid "Hold" msgstr "Wstrzymaj" #: Mailman/Cgi/admin.py:795 Mailman/Cgi/admindb.py:353 #: Mailman/Cgi/admindb.py:412 Mailman/Cgi/admindb.py:463 #: Mailman/Cgi/admindb.py:704 Mailman/Commands/cmd_confirm.py:93 #: Mailman/Gui/ContentFilter.py:37 Mailman/Gui/Privacy.py:221 #: Mailman/Gui/Privacy.py:245 Mailman/Gui/Privacy.py:355 msgid "Discard" msgstr "Zignoruj" #: Mailman/Cgi/admin.py:795 Mailman/Cgi/admindb.py:463 #: Mailman/Gui/Privacy.py:244 Mailman/Gui/Privacy.py:355 msgid "Accept" msgstr "Zaakceptuj" #: Mailman/Cgi/admin.py:798 Mailman/Cgi/admindb.py:710 msgid "Action:" msgstr "Akcja:" #: Mailman/Cgi/admin.py:810 msgid "Move rule up" msgstr "Przesuń regułę wyżej" #: Mailman/Cgi/admin.py:811 msgid "Move rule down" msgstr "Przesuń regułę niżej" #: Mailman/Cgi/admin.py:844 msgid "
    (Edit %(varname)s)" msgstr "
    (Edytuj %(varname)s)" #: Mailman/Cgi/admin.py:846 msgid "
    (Details for %(varname)s)" msgstr "
    (Więcej o %(varname)s)" #: Mailman/Cgi/admin.py:853 msgid "" "
    Note:\n" " setting this value performs an immediate action but does not modify\n" " permanent state." msgstr "" "
    Uwaga:\n" " ustawienie tej wartości powoduje natychmiastową zmianę, ale\n" " nie wprowadza jej na stałe." #: Mailman/Cgi/admin.py:867 msgid "Mass Subscriptions" msgstr "Hurtowe zapisywanie" #: Mailman/Cgi/admin.py:874 msgid "Mass Removals" msgstr "Hurtowe usuwanie" #: Mailman/Cgi/admin.py:881 msgid "Membership List" msgstr "Lista prenumeratorów" #: Mailman/Cgi/admin.py:889 msgid "(help)" msgstr "(pomoc)" #: Mailman/Cgi/admin.py:890 msgid "Find member %(link)s:" msgstr "Znajdź prenumeratora %(link)s:" #: Mailman/Cgi/admin.py:893 msgid "Search..." msgstr "Szukaj..." #: Mailman/Cgi/admin.py:910 msgid "Bad regular expression: " msgstr "Błędne wyrażenie regularne: " #: Mailman/Cgi/admin.py:964 msgid "%(allcnt)s members total, %(membercnt)s shown" msgstr "%(allcnt)s prenumeratorów, wyświetlono %(membercnt)s" #: Mailman/Cgi/admin.py:967 msgid "%(allcnt)s members total" msgstr "%(allcnt)s prenumeratorów" #: Mailman/Cgi/admin.py:991 msgid "unsub" msgstr "usuń" #: Mailman/Cgi/admin.py:992 msgid "member address
    member name" msgstr "adres
    nazwisko prenumeratora" #: Mailman/Cgi/admin.py:993 msgid "hide" msgstr "ukryj" #: Mailman/Cgi/admin.py:993 msgid "mod" msgstr "mod." #: Mailman/Cgi/admin.py:994 msgid "nomail
    [reason]" msgstr "wył.
    [powód]" #: Mailman/Cgi/admin.py:995 msgid "ack" msgstr "powiadom." #: Mailman/Cgi/admin.py:995 msgid "not metoo" msgstr "bez kopii" #: Mailman/Cgi/admin.py:996 msgid "nodupes" msgstr "bez duplikatu" #: Mailman/Cgi/admin.py:997 msgid "plain" msgstr "bez MIME" #: Mailman/Cgi/admin.py:997 Mailman/Cgi/options.py:307 msgid "digest" msgstr "paczka" #: Mailman/Cgi/admin.py:998 msgid "language" msgstr "język" #: Mailman/Cgi/admin.py:1009 msgid "?" msgstr "?" #: Mailman/Cgi/admin.py:1010 msgid "U" msgstr "U" #: Mailman/Cgi/admin.py:1011 msgid "A" msgstr "A" #: Mailman/Cgi/admin.py:1012 msgid "B" msgstr "Z" #: Mailman/Cgi/admin.py:1084 msgid "unsub -- Click on this to unsubscribe the member." msgstr "usuń -- Kliknij, by wypisać prenumeratora." #: Mailman/Cgi/admin.py:1086 msgid "" "mod -- The user's personal moderation flag. If this is\n" " set, postings from them will be moderated, otherwise they will be\n" " approved." msgstr "" "mod. -- Znacznik moderowania. Jeśli jest \n" "\tustawiony, wszystkie wiadomości wysyłane z tego adresu\n" "\tbędą moderowane. W przeciwnym razie będą przesyłane na listę." #: Mailman/Cgi/admin.py:1090 msgid "" "hide -- Is the member's address concealed on\n" " the list of subscribers?" msgstr "" "ukryj -- Czy adres prenumeratora na liście\n" " jest niewidoczny?" #: Mailman/Cgi/admin.py:1092 msgid "" "nomail -- Is delivery to the member disabled? If so, an\n" " abbreviation will be given describing the reason for the disabled\n" " delivery:\n" "
    • U -- Delivery was disabled by the user via their\n" " personal options page.\n" "
    • A -- Delivery was disabled by the list\n" " administrators.\n" "
    • B -- Delivery was disabled by the system due to\n" " excessive bouncing from the member's address.\n" "
    • ? -- The reason for disabled delivery isn't " "known.\n" " This is the case for all memberships which were " "disabled\n" " in older versions of Mailman.\n" "
    " msgstr "" "wył. -- Czy dostarczanie wiadomości jest wyłączone? Jeśli tak, podany " "zostanie powód braku wiadomości:\n" "
    • U -- Użytkownik sam wyłączył dostarczanie wiadomości." "
    • A -- Administrator wyłączył dostarczanie wiadomości.
    • Z " "-- Zbyt wiele zwrotów z adresu.
    • ? -- Przyczyna nie otrzymywania " "wiadomości nie jest znana. \n" "
    " #: Mailman/Cgi/admin.py:1107 msgid "" "ack -- Does the member get acknowledgements of their\n" " posts?" msgstr "" "powiadom. -- Nadawca jest powiadamiany o przyjęciu przez listę\n" " jego wiadomości." #: Mailman/Cgi/admin.py:1110 msgid "" "not metoo -- Does the member want to avoid copies of their\n" " own postings?" msgstr "" "bez kopii -- Nadawca nie dostaje kopii listów\n" " wysłanych przez siebie na listę." #: Mailman/Cgi/admin.py:1113 msgid "" "nodupes -- Does the member want to avoid duplicates of the\n" " same message?" msgstr "" "bez duplikatów -- Nadawca nie dostaje duplikatów\n" "\ttej samej wiadomości." #: Mailman/Cgi/admin.py:1116 msgid "" "digest -- Does the member get messages in digests?\n" " (otherwise, individual messages)" msgstr "" "paczka -- Dostarczanie listów w paczkach\n" " (domyślnie: każdy list osobno)" #: Mailman/Cgi/admin.py:1119 msgid "" "plain -- If getting digests, does the member get plain\n" " text digests? (otherwise, MIME)" msgstr "" "bez MIME -- Jeśli paczki są włączone, czy wysyłać je w formacie\n" " czystego tekstu? (domyślnie: MIME)" #: Mailman/Cgi/admin.py:1121 msgid "language -- Language preferred by the user" msgstr "język -- Język preferowany przez użytkownika" #: Mailman/Cgi/admin.py:1135 msgid "Click here to hide the legend for this table." msgstr "Kliknij tutaj, żeby ukryć legendę tabeli." #: Mailman/Cgi/admin.py:1139 msgid "Click here to include the legend for this table." msgstr "Kliknij tutaj, żeby obejrzeć legendę tabeli." #: Mailman/Cgi/admin.py:1146 msgid "" "

    To view more members, click on the appropriate\n" " range listed below:" msgstr "" "

    Aby zobaczyć innych subskrybentów, kliknij odpowiedni\n" " zakres poniżej:" #: Mailman/Cgi/admin.py:1156 msgid "from %(start)s to %(end)s" msgstr "od %(start)s do %(end)s" #: Mailman/Cgi/admin.py:1169 msgid "Subscribe these users now or invite them?" msgstr "Chcesz zapisać, czy tylko zaprosić użytkowników?" #: Mailman/Cgi/admin.py:1171 msgid "Invite" msgstr "Zaproś" #: Mailman/Cgi/admin.py:1171 Mailman/Cgi/listinfo.py:183 msgid "Subscribe" msgstr "Zapisz" #: Mailman/Cgi/admin.py:1177 msgid "Send welcome messages to new subscribees?" msgstr "Wysłać list powitalny do nowo zapisanych subskrybentów?" #: Mailman/Cgi/admin.py:1179 Mailman/Cgi/admin.py:1188 #: Mailman/Cgi/admin.py:1221 Mailman/Cgi/admin.py:1229 #: Mailman/Cgi/confirm.py:293 Mailman/Cgi/create.py:353 #: Mailman/Cgi/create.py:388 Mailman/Cgi/create.py:426 #: Mailman/Cgi/rmlist.py:230 Mailman/Gui/Archive.py:33 #: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62 #: Mailman/Gui/Autoresponse.py:71 Mailman/Gui/Bounce.py:77 #: Mailman/Gui/Bounce.py:120 Mailman/Gui/Bounce.py:146 #: Mailman/Gui/Bounce.py:155 Mailman/Gui/ContentFilter.py:74 #: Mailman/Gui/ContentFilter.py:116 Mailman/Gui/ContentFilter.py:120 #: Mailman/Gui/Digest.py:46 Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 #: Mailman/Gui/Digest.py:89 Mailman/Gui/General.py:158 #: Mailman/Gui/General.py:223 Mailman/Gui/General.py:229 #: Mailman/Gui/General.py:307 Mailman/Gui/General.py:334 #: Mailman/Gui/General.py:361 Mailman/Gui/General.py:372 #: Mailman/Gui/General.py:375 Mailman/Gui/General.py:385 #: Mailman/Gui/General.py:390 Mailman/Gui/General.py:396 #: Mailman/Gui/General.py:416 Mailman/Gui/General.py:448 #: Mailman/Gui/General.py:471 Mailman/Gui/General.py:488 #: Mailman/Gui/NonDigest.py:45 Mailman/Gui/NonDigest.py:53 #: Mailman/Gui/NonDigest.py:140 Mailman/Gui/NonDigest.py:162 #: Mailman/Gui/Privacy.py:110 Mailman/Gui/Privacy.py:116 #: Mailman/Gui/Privacy.py:149 Mailman/Gui/Privacy.py:202 #: Mailman/Gui/Privacy.py:273 Mailman/Gui/Privacy.py:370 #: Mailman/Gui/Privacy.py:389 Mailman/Gui/Usenet.py:52 #: Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 Mailman/Gui/Usenet.py:105 msgid "No" msgstr "Nie" #: Mailman/Cgi/admin.py:1179 Mailman/Cgi/admin.py:1188 #: Mailman/Cgi/admin.py:1221 Mailman/Cgi/admin.py:1229 #: Mailman/Cgi/confirm.py:293 Mailman/Cgi/create.py:353 #: Mailman/Cgi/create.py:388 Mailman/Cgi/create.py:426 #: Mailman/Cgi/rmlist.py:230 Mailman/Gui/Archive.py:33 #: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62 #: Mailman/Gui/Bounce.py:77 Mailman/Gui/Bounce.py:120 #: Mailman/Gui/Bounce.py:146 Mailman/Gui/Bounce.py:155 #: Mailman/Gui/ContentFilter.py:74 Mailman/Gui/ContentFilter.py:116 #: Mailman/Gui/ContentFilter.py:120 Mailman/Gui/Digest.py:46 #: Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 Mailman/Gui/Digest.py:89 #: Mailman/Gui/General.py:223 Mailman/Gui/General.py:229 #: Mailman/Gui/General.py:307 Mailman/Gui/General.py:334 #: Mailman/Gui/General.py:361 Mailman/Gui/General.py:372 #: Mailman/Gui/General.py:375 Mailman/Gui/General.py:385 #: Mailman/Gui/General.py:390 Mailman/Gui/General.py:396 #: Mailman/Gui/General.py:416 Mailman/Gui/General.py:448 #: Mailman/Gui/General.py:471 Mailman/Gui/General.py:488 #: Mailman/Gui/NonDigest.py:45 Mailman/Gui/NonDigest.py:53 #: Mailman/Gui/NonDigest.py:140 Mailman/Gui/NonDigest.py:162 #: Mailman/Gui/Privacy.py:110 Mailman/Gui/Privacy.py:116 #: Mailman/Gui/Privacy.py:149 Mailman/Gui/Privacy.py:202 #: Mailman/Gui/Privacy.py:273 Mailman/Gui/Privacy.py:370 #: Mailman/Gui/Privacy.py:389 Mailman/Gui/Usenet.py:52 #: Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 Mailman/Gui/Usenet.py:105 msgid "Yes" msgstr "Tak" #: Mailman/Cgi/admin.py:1186 msgid "Send notifications of new subscriptions to the list owner?" msgstr "Wysyłać powiadomienia o nowych subskrypcjach do opiekuna listy?" #: Mailman/Cgi/admin.py:1194 Mailman/Cgi/admin.py:1235 msgid "Enter one address per line below..." msgstr "Wprowadź adresy, po jednym w każdej linii..." #: Mailman/Cgi/admin.py:1199 Mailman/Cgi/admin.py:1240 msgid "...or specify a file to upload:" msgstr "...albo wybierz plik z dysku lokalnego:" #: Mailman/Cgi/admin.py:1204 msgid "" "Below, enter additional text to be added to the\n" " top of your invitation or the subscription notification. Include at " "least\n" " one blank line at the end..." msgstr "" "Wprowadź tekst, który zostanie dodany do zaproszenia,\n" "\tbądź powiadomienia o prenumeracie.\n" "\tDodaj co najmniej jedną pustą linię na końcu..." #: Mailman/Cgi/admin.py:1219 msgid "Send unsubscription acknowledgement to the user?" msgstr "Czy wysłać użytkownikowi powiadomienie o wypisaniu?" #: Mailman/Cgi/admin.py:1227 msgid "Send notifications to the list owner?" msgstr "Czy wysyłać powiadomienie do opiekuna listy?" #: Mailman/Cgi/admin.py:1249 msgid "Change list ownership passwords" msgstr "Zmień hasła dostępu do listy" #: Mailman/Cgi/admin.py:1252 msgid "" "The list administrators are the people who have ultimate control " "over\n" "all parameters of this mailing list. They are able to change any list\n" "configuration variable available through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions; they are not\n" "able to change any list configuration variable, but they are allowed to " "tend\n" "to pending administration requests, including approving or rejecting held\n" "subscription requests, and disposing of held postings. Of course, the\n" "list administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into administrators and\n" "moderators, you must set a separate moderator password in the fields below,\n" "and also provide the email addresses of the list moderators in the\n" "general options section." msgstr "" "Administratorzy mają\n" "pełną kontrolę nad wszystkimi parametrami tej listy. Mogą oni\n" "dokonać tego dzięki poniższym stronom administracyjnym.\n" "\n" "

    Moderatorzy mają bardziej ograniczone uprawnienia; nie mogą\n" "oni zmieniać parametrów listy, natomiast zarządzają skolejkowanymi\n" "zapytaniami użytkowników, np. zezwalając lub odrzucając prośby\n" "o zapisanie, czy też usuwając zatrzymane wiadomości. Oczywiście\n" "administratorzy listy mogą wykonywać te same czynności.\n" "\n" "

    Aby podzielić obowiązki związane z zarządzaniem listą między\n" "administratorów i moderatorów, musisz wpisać poniżej dodatkowe hasło\n" "dla moderatorów a także wprowadzić ich adresy e-mail w \n" "opcjach ogólnych." #: Mailman/Cgi/admin.py:1271 msgid "Enter new administrator password:" msgstr "Wprowadź nowe hasło administratora:" #: Mailman/Cgi/admin.py:1273 msgid "Confirm administrator password:" msgstr "Potwierdź hasło administratora" #: Mailman/Cgi/admin.py:1278 msgid "Enter new moderator password:" msgstr "Wprowadź nowe hasło moderatora:" #: Mailman/Cgi/admin.py:1280 msgid "Confirm moderator password:" msgstr "Potwierdź hasło moderatora:" #: Mailman/Cgi/admin.py:1284 msgid "" "In addition to the above passwords you may specify a password for\n" "pre-approving posts to the list. Either of the above two passwords can\n" "be used in an Approved: header or first body line pseudo-header to\n" "pre-approve a post that would otherwise be held for moderation. In\n" "addition, the password below, if set, can be used for that purpose and\n" "no other." msgstr "" #: Mailman/Cgi/admin.py:1295 #, fuzzy msgid "Enter new poster password:" msgstr "Wprowadź nowe hasło moderatora:" #: Mailman/Cgi/admin.py:1297 #, fuzzy msgid "Confirm poster password:" msgstr "Potwierdź hasło moderatora:" #: Mailman/Cgi/admin.py:1306 msgid "Submit Your Changes" msgstr "Zatwierdź" #: Mailman/Cgi/admin.py:1329 msgid "Moderator passwords did not match" msgstr "Podane hasła moderatora nie są identyczne" #: Mailman/Cgi/admin.py:1340 #, fuzzy msgid "Poster passwords did not match" msgstr "Hasła nie są identyczne." #: Mailman/Cgi/admin.py:1350 msgid "Administrator passwords did not match" msgstr "Podane hasła administratora nie są identyczne" #: Mailman/Cgi/admin.py:1400 msgid "Already a member" msgstr "Już jest zapisany" #: Mailman/Cgi/admin.py:1403 msgid "<blank line>" msgstr "<pusta linia>" #: Mailman/Cgi/admin.py:1404 Mailman/Cgi/admin.py:1407 #: Mailman/Cgi/admindb.py:919 msgid "Bad/Invalid email address" msgstr "Nieprawidłowy adres e-mail" #: Mailman/Cgi/admin.py:1410 msgid "Hostile address (illegal characters)" msgstr "Nieprawidłowy adres (niedopuszczalne znaki)" #: Mailman/Cgi/admin.py:1413 bin/add_members:149 bin/clone_member:136 #: bin/sync_members:268 msgid "Banned address (matched %(pattern)s)" msgstr "Adres na czarnej liście (pasuje do %(pattern)s)" #: Mailman/Cgi/admin.py:1419 msgid "Successfully invited:" msgstr "Pomyślnie zaproszono:" #: Mailman/Cgi/admin.py:1421 msgid "Successfully subscribed:" msgstr "Pomyślnie zapisano:" #: Mailman/Cgi/admin.py:1426 msgid "Error inviting:" msgstr "Błędy przy zapraszaniu:" #: Mailman/Cgi/admin.py:1428 msgid "Error subscribing:" msgstr "Błędy przy zapisywaniu:" #: Mailman/Cgi/admin.py:1459 msgid "Successfully Unsubscribed:" msgstr "Pomyślnie wypisano:" #: Mailman/Cgi/admin.py:1464 msgid "Cannot unsubscribe non-members:" msgstr "Nie można wypisać osób nie zapisanych:" #: Mailman/Cgi/admin.py:1472 msgid "Bad moderation flag value" msgstr "Błędny znacznik moderowania" #: Mailman/Cgi/admin.py:1494 msgid "Not subscribed" msgstr "Nie zapisano" #: Mailman/Cgi/admin.py:1497 msgid "Ignoring changes to deleted member: %(user)s" msgstr "Nie znaleziono prenumeratora: %(user)s." #: Mailman/Cgi/admin.py:1537 msgid "Successfully Removed:" msgstr "Pomyślnie usunięto:" #: Mailman/Cgi/admin.py:1541 msgid "Error Unsubscribing:" msgstr "Błędy przy wypisywaniu:" #: Mailman/Cgi/admindb.py:199 Mailman/Cgi/admindb.py:208 msgid "%(realname)s Administrative Database" msgstr "%(realname)s - baza administracyjna" #: Mailman/Cgi/admindb.py:202 msgid "%(realname)s Administrative Database Results" msgstr "%(realname)s - baza administracyjna - wyniki" #: Mailman/Cgi/admindb.py:211 msgid "There are no pending requests." msgstr "Brak skolejkowanych zadań." #: Mailman/Cgi/admindb.py:214 msgid "Click here to reload this page." msgstr "Kliknij tutaj, żeby odświeżyć tę stronę." #: Mailman/Cgi/admindb.py:228 msgid "Detailed instructions for the administrative database" msgstr "Szczegółowe instrukcje odnośnie bazy administracyjnej" #: Mailman/Cgi/admindb.py:232 msgid "Administrative requests for mailing list:" msgstr "Zadania administracyjne dla listy:" #: Mailman/Cgi/admindb.py:235 Mailman/Cgi/admindb.py:291 msgid "Submit All Data" msgstr "Zatwierdź dane" #: Mailman/Cgi/admindb.py:241 Mailman/Cgi/admindb.py:289 msgid "Discard all messages marked Defer" msgstr "Zignoruj wszystkie wiadomości oznaczone jako Odłóż" #: Mailman/Cgi/admindb.py:255 msgid "all of %(esender)s's held messages." msgstr "wszystkie wstrzymane wiadomości od %(esender)s." #: Mailman/Cgi/admindb.py:260 msgid "a single held message." msgstr "jedna wstrzymana wiadomość." #: Mailman/Cgi/admindb.py:265 msgid "all held messages." msgstr "wszystkie wstrzymane wiadomości." #: Mailman/Cgi/admindb.py:310 msgid "Mailman Administrative Database Error" msgstr "Mailman - baza administracyjna - błąd" #: Mailman/Cgi/admindb.py:315 msgid "list of available mailing lists." msgstr "spis dostępnych list." #: Mailman/Cgi/admindb.py:316 msgid "You must specify a list name. Here is the %(link)s" msgstr "Musisz wybrać jedną z wymienionych list: %(link)s" #: Mailman/Cgi/admindb.py:329 msgid "Subscription Requests" msgstr "Prośby o zapisanie" #: Mailman/Cgi/admindb.py:331 msgid "Address/name" msgstr "Adres/nazwisko użytkownika" #: Mailman/Cgi/admindb.py:332 Mailman/Cgi/admindb.py:383 msgid "Your decision" msgstr "Twoja decyzja" #: Mailman/Cgi/admindb.py:333 Mailman/Cgi/admindb.py:384 msgid "Reason for refusal" msgstr "Powód odmowy" #: Mailman/Cgi/admindb.py:351 Mailman/Cgi/admindb.py:410 #: Mailman/Cgi/admindb.py:704 Mailman/Commands/cmd_confirm.py:90 msgid "Approve" msgstr "Zatwierdź" #: Mailman/Cgi/admindb.py:361 msgid "Permanently ban from this list" msgstr "Całkowite zablokowanie na tej liście" #: Mailman/Cgi/admindb.py:382 msgid "User address/name" msgstr "Adres/nazwisko użytkownika" #: Mailman/Cgi/admindb.py:422 msgid "Unsubscription Requests" msgstr "Prośby o wypisanie" #: Mailman/Cgi/admindb.py:434 msgid "Held Messages" msgstr "wszystkie wstrzymane wiadomości." #: Mailman/Cgi/admindb.py:437 msgid "Show this list grouped/sorted by" msgstr "" #: Mailman/Cgi/admindb.py:440 msgid "sender/sender" msgstr "" #: Mailman/Cgi/admindb.py:440 msgid "sender/time" msgstr "" #: Mailman/Cgi/admindb.py:440 msgid "ungrouped/time" msgstr "" #: Mailman/Cgi/admindb.py:456 Mailman/Cgi/admindb.py:687 msgid "From:" msgstr "Od:" #: Mailman/Cgi/admindb.py:459 msgid "Action to take on all these held messages:" msgstr "Co zrobić z tymi wszystkimi wiadomościami:" #: Mailman/Cgi/admindb.py:471 msgid "Preserve messages for the site administrator" msgstr "Zachowaj list dla administratora serwera" #: Mailman/Cgi/admindb.py:477 msgid "Forward messages (individually) to:" msgstr "Prześlij wiadomości (pojedynczo) do:" #: Mailman/Cgi/admindb.py:495 msgid "Clear this member's moderate flag" msgstr "Wyczyść znacznik moderacji dla tego adresu" #: Mailman/Cgi/admindb.py:499 msgid "The sender is now a member of this list" msgstr "Nadawca jest teraz prenumeratorem tej listy" #: Mailman/Cgi/admindb.py:508 msgid "Add %(esender)s to one of these sender filters:" msgstr "Dodaj %(esender)s do filtra nadawców" #: Mailman/Cgi/admindb.py:513 msgid "Accepts" msgstr "Zaakceptuj" #: Mailman/Cgi/admindb.py:513 msgid "Discards" msgstr "Zignoruj" #: Mailman/Cgi/admindb.py:513 msgid "Holds" msgstr "Wstrzymaj" #: Mailman/Cgi/admindb.py:513 msgid "Rejects" msgstr "Odmów" #: Mailman/Cgi/admindb.py:522 msgid "" "Ban %(esender)s from ever subscribing to this\n" " mailing list" msgstr "Zablokowanie możliwości zapisania się z adresu %(esender)s" #: Mailman/Cgi/admindb.py:527 msgid "" "Click on the message number to view the individual\n" " message, or you can " msgstr "Kliknij na numerze wiadomości, żeby ją zobaczyć. Możesz też " #: Mailman/Cgi/admindb.py:529 msgid "view all messages from %(esender)s" msgstr "zobaczyć wszystkie wiadomości od %(esender)s" #: Mailman/Cgi/admindb.py:551 Mailman/Cgi/admindb.py:690 msgid "Subject:" msgstr "Temat:" #: Mailman/Cgi/admindb.py:554 msgid " bytes" msgstr " bajtów " #: Mailman/Cgi/admindb.py:554 msgid "Size:" msgstr "Rozmiar:" #: Mailman/Cgi/admindb.py:558 Mailman/Handlers/Scrubber.py:203 #: Mailman/Handlers/Scrubber.py:301 Mailman/Handlers/Scrubber.py:303 msgid "not available" msgstr "nie znany" #: Mailman/Cgi/admindb.py:559 Mailman/Cgi/admindb.py:693 msgid "Reason:" msgstr "Powód:" #: Mailman/Cgi/admindb.py:563 Mailman/Cgi/admindb.py:697 msgid "Received:" msgstr "Otrzymane:" #: Mailman/Cgi/admindb.py:619 msgid "Posting Held for Approval" msgstr "Wiadomość zatrzymana do akceptacji" #: Mailman/Cgi/admindb.py:621 msgid " (%(count)d of %(total)d)" msgstr " (%(count)d z %(total)d)" #: Mailman/Cgi/admindb.py:632 msgid "Message with id #%(id)d was lost." msgstr "List z identyfikatorem #%(id)d zaginął." #: Mailman/Cgi/admindb.py:641 msgid "Message with id #%(id)d is corrupted." msgstr "List z identyfikatorem #%(id)d jest uszkodzony." #: Mailman/Cgi/admindb.py:714 msgid "Preserve message for site administrator" msgstr "Zachowaj list dla administratora serwera" #: Mailman/Cgi/admindb.py:718 msgid "Additionally, forward this message to: " msgstr "Dodatkowo prześlij kopię listu do: " #: Mailman/Cgi/admindb.py:722 Mailman/Cgi/admindb.py:791 #: Mailman/Cgi/admindb.py:868 Mailman/Cgi/admindb.py:870 msgid "[No explanation given]" msgstr "[Nie podano wyjaśnienia]" #: Mailman/Cgi/admindb.py:724 msgid "If you reject this post,
    please explain (optional):" msgstr "Jeśli odrzucasz ten list,
    podaj wyjaśnienie (opcjonalnie):" #: Mailman/Cgi/admindb.py:730 msgid "Message Headers:" msgstr "Nagłówki listu:" #: Mailman/Cgi/admindb.py:735 msgid "Message Excerpt:" msgstr "Wycinek z treści listu:" #: Mailman/Cgi/admindb.py:907 msgid "Database Updated..." msgstr "Baza danych zaktualizowana..." #: Mailman/Cgi/admindb.py:911 msgid " is already a member" msgstr " jest już prenumeratorem" #: Mailman/Cgi/admindb.py:915 msgid "%(addr)s is banned (matched: %(patt)s)" msgstr "" #: Mailman/Cgi/confirm.py:78 msgid "Confirmation string was empty." msgstr "Kod potwierdzający był pusty." #: Mailman/Cgi/confirm.py:98 msgid "" "Invalid confirmation string:\n" " %(safecookie)s.\n" "\n" "

    Note that confirmation strings expire approximately\n" " %(days)s days after the initial subscription request. If your\n" " confirmation has expired, please try to re-submit your subscription.\n" " Otherwise, re-enter your confirmation\n" " string." msgstr "" "Nieprawidłowy kod potwierdzający:\n" " %(safecookie)s.\n" "\n" "

    Pamiętaj, że kody potwierdzające wygasają po około\n" " %(days)s dniach od wysłania pierwszej prośby o zapisanie. Jeśli\n" " ten czas już upłynął, spróbuj ponownie zapisać się.\n" " Możesz też wprowadzić ponownie\n" " kod potwierdzający." #: Mailman/Cgi/confirm.py:131 msgid "" "The address requesting unsubscription is not\n" " a member of the mailing list. Perhaps you have already " "been\n" " unsubscribed, e.g. by the list administrator?" msgstr "" "Podany adres nie jest zapisany na\n" " tę listę. Być może został już wcześniej wypisany,\n" " n.p. przez opiekuna listy ?" #: Mailman/Cgi/confirm.py:147 msgid "" "The address requesting to be changed has\n" " been subsequently unsubscribed. This request has been\n" " cancelled." msgstr "" "Zmieniany adres został w międzyczasie \n" " usunięty. Bieżące operacja została anulowana." #: Mailman/Cgi/confirm.py:167 msgid "System error, bad content: %(content)s" msgstr "Błąd systemu, niepoprawne: %(content)s" #: Mailman/Cgi/confirm.py:177 msgid "Bad confirmation string" msgstr "Nieprawidłowy kod potwierdzający" #: Mailman/Cgi/confirm.py:196 msgid "Enter confirmation cookie" msgstr "Wprowadź kod potwierdzający" #: Mailman/Cgi/confirm.py:209 msgid "" "Please enter the confirmation string\n" " (i.e. cookie) that you received in your email message, in the " "box\n" " below. Then hit the Submit button to proceed to the next\n" " confirmation step." msgstr "" "Wprowadź kod potwierdzający,\n" " który otrzymałeś w emailu. Następnie naciśnij OK,\n" #: Mailman/Cgi/confirm.py:214 msgid "Confirmation string:" msgstr "Kod potwierdzający:" #: Mailman/Cgi/confirm.py:216 msgid "Submit" msgstr "OK" #: Mailman/Cgi/confirm.py:233 msgid "Confirm subscription request" msgstr "Potwierdź subskrypcję" #: Mailman/Cgi/confirm.py:248 msgid "" "Your confirmation is required in order to complete the\n" " subscription request to the mailing list %(listname)s. Your\n" " subscription settings are shown below; make any necessary changes and " "hit\n" " Subscribe to complete the confirmation process. Once you've\n" " confirmed your subscription request, you will be shown your account\n" " options page which you can use to further customize your membership\n" " options.\n" "\n" "

    Note: your password will be emailed to you once your subscription is\n" " confirmed. You can change it by visiting your personal options page.\n" "\n" "

    Or hit Cancel my subscription request if you no longer want " "to\n" " subscribe to this list." msgstr "" "Aby zapisać się na listę\n" " %(listname)s, wymagane jest potwierdzenie. \n" " Poniżej wyświetlono wybrane przez Ciebie opcje;\n" " możesz je zmienić, po czym nacisnąć Zapisz.\n" " Wyświetlona zostanie strona, \n" " na której będziesz mógł ustawić szczegółowe opcje\n" " subskrypcji.\n" "

    Uwaga! Hasło zostanie przesłane emailem, jak tylko potwierdzisz " "subskrypcję. Hasło można zmienić na stronie ustawień subskrypcji.\n" "\n" "

    Jeśli nie chcesz się zapisać, naciśnij Anuluj." #: Mailman/Cgi/confirm.py:264 msgid "" "Your confirmation is required in order to continue with\n" " the subscription request to the mailing list %(listname)s.\n" " Your subscription settings are shown below; make any necessary " "changes\n" " and hit Subscribe to list ... to complete the confirmation\n" " process. Once you've confirmed your subscription request, the\n" " moderator must approve or reject your membership request. You will\n" " receive notice of their decision.\n" "\n" "

    Note: your password will be emailed to you once your " "subscription\n" " is confirmed. You can change it by visiting your personal options\n" " page.\n" "\n" "

    Or, if you've changed your mind and do not want to subscribe to\n" " this mailing list, you can hit Cancel my subscription\n" " request." msgstr "" "Aby zapisać się na listę\n" " %(listname)s, wymagane jest potwierdzenie. \n" " Poniżej wyświetlono wybrane przez Ciebie opcje; możesz je zmienić, po czym " "naciśnij Zapisz.\n" " Moderator listy\n" " zaaprobuje lub odrzuci Twoją prośbę. Otrzymasz informację o jego\n" " decyzji.\n" "

    Uwaga! Hasło zostanie przesłane emailem, jak tylko potwierdzisz " "subskrypcję. Hasło można zmienić na stronie ustawień subskrypcji.\n" "\n" "

    Naciśnij Anuluj, aby zrezygnować\n" " z zapisania się." #: Mailman/Cgi/confirm.py:282 msgid "Your email address:" msgstr "Adres email:" #: Mailman/Cgi/confirm.py:283 msgid "Your real name:" msgstr "Nazwisko i imię:" #: Mailman/Cgi/confirm.py:292 msgid "Receive digests?" msgstr "Grupować listy w paczki?" #: Mailman/Cgi/confirm.py:301 msgid "Preferred language:" msgstr "Preferowany język:" #: Mailman/Cgi/confirm.py:306 msgid "Subscribe to list %(listname)s" msgstr "Zapisz się na listę %(listname)s" #: Mailman/Cgi/confirm.py:307 msgid "Cancel my subscription request" msgstr "Anuluj żądanie subskrypcji" #: Mailman/Cgi/confirm.py:324 msgid "You have canceled your subscription request." msgstr "Prośba o zapisanie została anulowana." #: Mailman/Cgi/confirm.py:362 msgid "Awaiting moderator approval" msgstr "Oczekiwanie na zgodę administratora" #: Mailman/Cgi/confirm.py:365 msgid "" " You have successfully confirmed your subscription request to " "the\n" " mailing list %(listname)s, however final approval is required " "from\n" " the list moderator before you will be subscribed. Your request\n" " has been forwarded to the list moderator, and you will be " "notified\n" " of the moderator's decision." msgstr "" " Otrzymaliśmy potwierdzenie zapisania się na listę %(listname)" "s. \n" " Jednak niezbędne jest jeszcze zatwierdzenie\n" " decyzji przez moderatora listy. \n" " Zostaniesz poinformowany o jego decyzji." #: Mailman/Cgi/confirm.py:372 Mailman/Cgi/confirm.py:437 #: Mailman/Cgi/confirm.py:526 Mailman/Cgi/confirm.py:763 msgid "" "Invalid confirmation string. It is\n" " possible that you are attempting to confirm a request for an\n" " address that has already been unsubscribed." msgstr "" "Nieprawidłowy kod potwierdzający. Istnieje możliwość, że próbujesz\n" " potwierdzić decyzję dla adresu, który już został\n" " wcześniej wypisany." #: Mailman/Cgi/confirm.py:376 msgid "You are already a member of this mailing list!" msgstr "Jesteś już zapisany na tę listę!" #: Mailman/Cgi/confirm.py:379 msgid "" "You are currently banned from subscribing to\n" " this list. If you think this restriction is erroneous, please\n" " contact the list owners at %(owneraddr)s." msgstr "" "Brak możliwości zapisania się na tę listę.\n" " Skontaktuj\n" " się z opiekunem listy - %(owneraddr)s." #: Mailman/Cgi/confirm.py:383 msgid "" " You were not invited to this mailing list. The invitation has\n" " been discarded, and both list administrators have been\n" " alerted." msgstr "" " Nie zostałeś zaproszony do subskrypcji tej listy. Zaproszenie \n" " zostało anulowane, a opiekunowie obu list zostali \n" " powiadomieni o incydencie." #: Mailman/Cgi/confirm.py:393 msgid "Subscription request confirmed" msgstr "Prośba o subskrypcję potwierdzona" #: Mailman/Cgi/confirm.py:397 msgid "" " You have successfully confirmed your subscription request for\n" " \"%(addr)s\" to the %(listname)s mailing list. A separate\n" " confirmation message will be sent to your email address, along\n" " with your password, and other useful information and links.\n" "\n" "

    You can now\n" " proceed to your membership login\n" " page." msgstr "" " Twój adres \"%(addr)s\" został dopisany do listy\n" " %(listname)s. Wkrótce otrzymasz list potwierdzający\n" " zawierający hasło oraz inne użyteczne informacje i linki.\n" "\n" "

    Możesz teraz\n" " przejść na stronę logowania\n" " dla subskrybentów." #: Mailman/Cgi/confirm.py:415 msgid "You have canceled your unsubscription request." msgstr "Prośba o wypisanie została anulowana." #: Mailman/Cgi/confirm.py:443 msgid "Unsubscription request confirmed" msgstr "Potwierdzono wypisanie z listy" #: Mailman/Cgi/confirm.py:447 msgid "" " You have successfully unsubscribed from the %(listname)s " "mailing\n" " list. You can now visit the list's " "main\n" " information page." msgstr "" " Zostałeś wypisany z listy %(listname)s.\n" " Możesz teraz odwiedzić stronę\n" " informacyjną listy." #: Mailman/Cgi/confirm.py:458 msgid "Confirm unsubscription request" msgstr "Zaakceptuj prośbę o wypisanie" #: Mailman/Cgi/confirm.py:473 Mailman/Cgi/confirm.py:575 msgid "Not available" msgstr "Niedostępny" #: Mailman/Cgi/confirm.py:476 msgid "" "Your confirmation is required in order to complete the\n" " unsubscription request from the mailing list %(listname)s. " "You\n" " are currently subscribed with\n" "\n" "

    • Real name: %(fullname)s\n" "
    • Email address: %(addr)s\n" "
    \n" "\n" " Hit the Unsubscribe button below to complete the confirmation\n" " process.\n" "\n" "

    Or hit Cancel and discard to cancel this unsubscription\n" " request." msgstr "" "Potwierdź wypisanie się\n" " z listy %(listname)s. \n" " Twoje dane\n" "\n" "

    • Nazwisko i imię: %(fullname)s\n" "
    • Adres e-mail: %(addr)s\n" "
    \n" "\n" " Naciśnij Wypisz, aby potwierdzić\n" " wypisanie się.\n" "\n" "

    Kliknij Anuluj, aby zrezygnować.\n" #: Mailman/Cgi/confirm.py:492 Mailman/Cgi/options.py:767 #: Mailman/Cgi/options.py:911 Mailman/Cgi/options.py:921 msgid "Unsubscribe" msgstr "Wypisz" #: Mailman/Cgi/confirm.py:493 Mailman/Cgi/confirm.py:604 msgid "Cancel and discard" msgstr "Anuluj" #: Mailman/Cgi/confirm.py:503 msgid "You have canceled your change of address request." msgstr "Anulowałeś prośbę o zmianę adresu." #: Mailman/Cgi/confirm.py:532 msgid "" "%(newaddr)s is banned from subscribing to the\n" " %(realname)s list. If you think this restriction is erroneous,\n" " please contact the list owners at %(owneraddr)s." msgstr "" "Adres email %(newaddr)s jest na liście adresów o zabronionym\n" " dostępie do listy %(realname)s. Jeśli uważasz, że doszło tego przez " "pomyłkę,\n" " skontaktuj się z opiekunem listy - %(owneraddr)s." #: Mailman/Cgi/confirm.py:537 msgid "" "%(newaddr)s is already a member of\n" " the %(realname)s list. It is possible that you are attempting\n" " to confirm a request for an address that has already been\n" " subscribed." msgstr "" "Adres email %(newaddr)s jest już zapisany na listę %(realname)s.\n" " Być może próbujesz potwierdzić subskrypcję dla adresu, który już " "został\n" " wcześniej zapisany." #: Mailman/Cgi/confirm.py:544 msgid "Change of address request confirmed" msgstr "Prośba o zmianę adresu potwierdzona" #: Mailman/Cgi/confirm.py:548 msgid "" " You have successfully changed your address on the %(listname)s\n" " mailing list from %(oldaddr)s to %(newaddr)s. " "You\n" " can now proceed to your membership\n" " login page." msgstr "" " Zmieniłeś adres, z którego korzystasz na liście %(listname)s\n" " z %(oldaddr)s na %(newaddr)s. Możesz\n" " teraz przejść na stronę\n" " logowania dla subskrybentów." #: Mailman/Cgi/confirm.py:560 msgid "Confirm change of address request" msgstr "Potwierdź żądanie zmiany adresu" #: Mailman/Cgi/confirm.py:579 msgid "globally" msgstr "globalnej" #: Mailman/Cgi/confirm.py:582 msgid "" "Your confirmation is required in order to complete the\n" " change of address request for the mailing list %(listname)s. " "You\n" " are currently subscribed with\n" "\n" "

    • Real name: %(fullname)s\n" "
    • Old email address: %(oldaddr)s\n" "
    \n" "\n" " and you have requested to %(globallys)s change your email address to\n" "\n" "
    • New email address: %(newaddr)s\n" "
    \n" "\n" " Hit the Change address button below to complete the " "confirmation\n" " process.\n" "\n" "

    Or hit Cancel and discard to cancel this change of address\n" " request." msgstr "" "Potwierdź zmianę adresu na liście \n" " %(listname)s. Aktualnie jesteś zapisany jako\n" "\n" "

    • Imię i nazwisko: %(fullname)s\n" "
    • Dotychczasowy adres e-mail: %(oldaddr)s\n" "
    \n" "\n" " i zgłosiłeś żądanie %(globallys)s zmiany adresu na\n" "\n" "
    • Nowy adres e-mail: %(newaddr)s\n" "
    \n" "\n" " Naciśnij przycisk Zmień adres, aby potwierdzić\n" " zmianę.\n" "\n" "

    Kliknij Anuluj, jeśli nie chcesz\n" " zmieniać adresu, na który otrzymujesz wiadomości." #: Mailman/Cgi/confirm.py:603 msgid "Change address" msgstr "Zmień adres" #: Mailman/Cgi/confirm.py:612 Mailman/Cgi/confirm.py:728 msgid "Continue awaiting approval" msgstr "Oczekiwanie na reakcję moderatora" #: Mailman/Cgi/confirm.py:620 msgid "" "Okay, the list moderator will still have the\n" " opportunity to approve or reject this message." msgstr "" "W porządku, moderator listy będzie nadal miał możliwość\n" " zatwierdzenia bądź odrzucenia tego listu." #: Mailman/Cgi/confirm.py:648 msgid "Sender discarded message via web." msgstr "Wysyłający anulował list poprzez stronę WWW" #: Mailman/Cgi/confirm.py:650 msgid "" "The held message with the Subject:\n" " header %(subject)s could not be found. The most " "likely\n" " reason for this is that the list moderator has already approved " "or\n" " rejected the message. You were not able to cancel it in\n" " time." msgstr "" "Zatrzymany list o temacie:\n" " %(subject)s nie został znaleziony. Najprawdopodobniej\n" " moderator listy już zatwierdził bądź odrzucił tę wiadomość.\n" " Nie będziesz więc mógł jej anulować." #: Mailman/Cgi/confirm.py:658 msgid "Posted message canceled" msgstr "Wiadomość anulowana" #: Mailman/Cgi/confirm.py:661 msgid "" " You have successfully canceled the posting of your message with\n" " the Subject: header %(subject)s to the mailing list\n" " %(listname)s." msgstr "" " Wiadomość o temacie:\n" " %(subject)s wysłana na listę\n" " %(listname)s została anulowana." #: Mailman/Cgi/confirm.py:672 msgid "Cancel held message posting" msgstr "Anuluj wstrzymany list" #: Mailman/Cgi/confirm.py:697 msgid "" "The held message you were referred to has\n" " already been handled by the list administrator." msgstr "" "Wstrzymana wiadomość, do której się odwołujesz\n" " została już oceniona przez opiekuna listy." #: Mailman/Cgi/confirm.py:711 msgid "" "Your confirmation is required in order to cancel the\n" " posting of your message to the mailing list %(listname)s:\n" "\n" "

    • Sender: %(sender)s\n" "
    • Subject: %(subject)s\n" "
    • Reason: %(reason)s\n" "
    \n" "\n" " Hit the Cancel posting button to discard the posting.\n" "\n" "

    Or hit the Continue awaiting approval button to continue to\n" " allow the list moderator to approve or reject the message." msgstr "" "Wymagane jest potwierdzenie anulowania wysyłki wiadomości\n" " na listę %(listname)s:\n" "\n" "

    • Wysyłający: %(sender)s\n" "
    • Temat: %(subject)s\n" "
    • Powód: %(reason)s\n" "
    \n" "\n" " Kliknij przycisk Anuluj wysyłanie.\n" "\n" "

    Alternatywnie możesz kliknąć przycisk Oczekuj na\n" " zatwierdzenie, aby umożliwić moderatorowi listy zatwierdzenie\n" " lub odrzucenie wiadomości." #: Mailman/Cgi/confirm.py:727 msgid "Cancel posting" msgstr "Anuluj wysyłanie" #: Mailman/Cgi/confirm.py:739 msgid "" "You have canceled the re-enabling of your membership. If\n" " we continue to receive bounces from your address, it could be deleted " "from\n" " this mailing list." msgstr "" "Anulowałeś prośbę o uaktywnienie subskrypcji. Jeżeli \n" " nadal będziemy dostawać zwroty z tego adresu, może on zostać \n" " usunięty z tej listy." #: Mailman/Cgi/confirm.py:769 msgid "Membership re-enabled." msgstr "Prenumerata ponownie aktywna" #: Mailman/Cgi/confirm.py:773 msgid "" " You have successfully re-enabled your membership in the\n" " %(listname)s mailing list. You can now visit your member options page.\n" " " msgstr "" " Dziękujemy za uaktywnienie subskrypcji listy %(listname)s.\n" " Możesz teraz odwiedzić stronę\n" " stronę z opcjami subskrypcji." #: Mailman/Cgi/confirm.py:785 msgid "Re-enable mailing list membership" msgstr "Wznowienie subskrypcji" #: Mailman/Cgi/confirm.py:802 msgid "" "We're sorry, but you have already been unsubscribed\n" " from this mailing list. To re-subscribe, please visit the\n" " list information page." msgstr "" " Przepraszam, ale zostałeś już wypisany z tej listy.\n" " Przejdź na stronę informacyjną " "listy, aby ponownie się zapisać." #: Mailman/Cgi/confirm.py:817 msgid "not available" msgstr "niedostępne" #: Mailman/Cgi/confirm.py:821 msgid "" "Your membership in the %(realname)s mailing list is\n" " currently disabled due to excessive bounces. Your confirmation is\n" " required in order to re-enable delivery to your address. We have the\n" " following information on file:\n" "\n" "

    • Member address: %(member)s\n" "
    • Member name: %(username)s\n" "
    • Last bounce received on: %(date)s\n" "
    • Approximate number of days before you are permanently " "removed\n" " from this list: %(daysleft)s\n" "
    \n" "\n" " Hit the Re-enable membership button to resume receiving " "postings\n" " from the mailing list. Or hit the Cancel button to defer\n" " re-enabling your membership.\n" " " msgstr "" "subskrypcja listy %(realname)s została zablokowana z \n" "powodu zbyt wielu zwrotów z Twojego adresu. Jeśli chcesz otrzymywać " "wiadomości, \n" "konieczne jest ponowne uaktywnienie prenumeraty.\n" "Stan prenumeraty:\n" "\n" "
    • Adres: %(member)s\n" "
    • Imię i Nazwisko: %(username)s\n" "
    • Data ostatniego zwrotu: %(date)s\n" "
    • Przybliżona ilość dni, po której subskrypcja zostanie \n" " całkowicie usunięta: %(daysleft)s\n" "
    \n" "\n" " Naciśnij przycisk Wznów subskrypcję, żeby wznowić " "dostarczanie \n" "wiadomości z tej listy. Kliknięcie przycisku Anuluj oznacza \n" "odłożenie decyzji na później. \n" " " #: Mailman/Cgi/confirm.py:841 msgid "Re-enable membership" msgstr "Ponowne uaktywnienie subskrypcji" #: Mailman/Cgi/confirm.py:842 msgid "Cancel" msgstr "Anuluj" #: Mailman/Cgi/create.py:49 Mailman/Cgi/rmlist.py:48 msgid "Bad URL specification" msgstr "Zły adres URL" #: Mailman/Cgi/create.py:64 Mailman/Cgi/rmlist.py:178 msgid "Return to the " msgstr "Powrót do " #: Mailman/Cgi/create.py:66 Mailman/Cgi/rmlist.py:180 msgid "general list overview" msgstr "głównej strony informacyjnej listy" #: Mailman/Cgi/create.py:67 Mailman/Cgi/rmlist.py:181 msgid "
    Return to the " msgstr "
    Powrót do " #: Mailman/Cgi/create.py:69 Mailman/Cgi/rmlist.py:183 msgid "administrative list overview" msgstr "strony administracyjnej listy" #: Mailman/Cgi/create.py:104 msgid "List name must not include \"@\": %(safelistname)s" msgstr "Nazwa listy nie może zawierać znaku \"@\": %(safelistname)s" #: Mailman/Cgi/create.py:111 msgid "List already exists: %(safelistname)s" msgstr "Taka lista już istnieje: %(safelistname)s" #: Mailman/Cgi/create.py:115 msgid "You forgot to enter the list name" msgstr "Zapomniałeś podać nazwę listy" #: Mailman/Cgi/create.py:119 msgid "You forgot to specify the list owner" msgstr "Zapomniałeś podać administratora listy" #: Mailman/Cgi/create.py:126 msgid "" "Leave the initial password (and confirmation) fields\n" " blank if you want Mailman to autogenerate the list\n" " passwords." msgstr "" "Pozostaw pola z początkowym hasłem puste, aby pozwolić Mailmanowi\n" " na wygenerowanie haseł." #: Mailman/Cgi/create.py:135 msgid "Initial list passwords do not match" msgstr "Wpisane hasła różnią się od siebie" #: Mailman/Cgi/create.py:144 msgid "The list password cannot be empty" msgstr "Hasło listy nie może być puste" #: Mailman/Cgi/create.py:156 msgid "You are not authorized to create new mailing lists" msgstr "Nie masz uprawnień do tworzenia nowych list" #: Mailman/Cgi/create.py:164 msgid "Unknown virtual host: %(safehostname)s" msgstr "Nieznany host wirtualny: %(safehostname)s" #: Mailman/Cgi/create.py:200 bin/newlist:207 msgid "Bad owner email address: %(s)s" msgstr "Niepoprawny adres administratora listy: %(s)s" #: Mailman/Cgi/create.py:205 bin/newlist:170 bin/newlist:211 msgid "List already exists: %(listname)s" msgstr "Lista %(listname)s już istnieje. " #: Mailman/Cgi/create.py:213 bin/newlist:205 msgid "Illegal list name: %(s)s" msgstr "Niedozwolona nazwa listy: %(s)s" #: Mailman/Cgi/create.py:218 msgid "" "Some unknown error occurred while creating the list.\n" " Please contact the site administrator for assistance." msgstr "" "Wystąpił nieznany błąd w trakcie tworzenia listy.\n" " Skontaktuj się z administratorem serwera." #: Mailman/Cgi/create.py:255 bin/newlist:252 msgid "Your new mailing list: %(listname)s" msgstr "Twoja nowa lista: %(listname)s" #: Mailman/Cgi/create.py:264 msgid "Mailing list creation results" msgstr "Raport z tworzenia listy" #: Mailman/Cgi/create.py:270 msgid "" "You have successfully created the mailing list\n" " %(listname)s and notification has been sent to the list owner\n" " %(owner)s. You can now:" msgstr "" "Lista %(listname)s została założona,\n" " a powiadomienie wysłane do opiekuna listy:\n" " %(owner)s. Możesz teraz:" #: Mailman/Cgi/create.py:274 msgid "Visit the list's info page" msgstr "Odwiedzić stronę informacyjną listy" #: Mailman/Cgi/create.py:275 msgid "Visit the list's admin page" msgstr "Odwiedzić stronę administracyjną listy" #: Mailman/Cgi/create.py:276 msgid "Create another list" msgstr "Utworzyć nową listę" #: Mailman/Cgi/create.py:294 msgid "Create a %(hostname)s Mailing List" msgstr "Utwórz listę na serwerze %(hostname)s" #: Mailman/Cgi/create.py:303 Mailman/Cgi/rmlist.py:201 #: Mailman/Gui/Bounce.py:187 Mailman/htmlformat.py:345 msgid "Error: " msgstr "Błąd: " #: Mailman/Cgi/create.py:305 msgid "" "You can create a new mailing list by entering the\n" " relevant information into the form below. The name of the mailing list\n" " will be used as the primary address for posting messages to the list, " "so\n" " it should be lowercased. You will not be able to change this once the\n" " list is created.\n" "\n" "

    You also need to enter the email address of the initial list owner.\n" " Once the list is created, the list owner will be given notification, " "along\n" " with the initial list password. The list owner will then be able to\n" " modify the password and add or remove additional list owners.\n" "\n" "

    If you want Mailman to automatically generate the initial list admin\n" " password, click on `Yes' in the autogenerate field below, and leave the\n" " initial list password fields empty.\n" "\n" "

    You must have the proper authorization to create new mailing lists.\n" " Each site should have a list creator's password, which you can\n" " enter in the field at the bottom. Note that the site administrator's\n" " password can also be used for authentication.\n" " " msgstr "" "Możesz utworzyć nową listę wpisując niezbędne informacje\n" " w poniższym formularzu. Nazwa listy będzie występowała\n" " w adresie e-mail służącym do wysyłania wiadomości, więc jej nazwa " "powinna być\n" " wpisana małymi literami. Zmiana tej nazwy po założeniu listy jest\n" " niemożliwa.\n" "\n" "

    Musisz podać też adres administratora listy.\n" " Po jej założeniu, administrator otrzyma potwierdzający email wraz\n" " z początkowym hasłem. Administrator listy będzie mógł je zmienić,\n" " a także dodawać i usuwać dodatkowych administratorów.\n" "\n" "

    Jeśli chcesz aby Mailman wygenerował hasło automatycznie\n" " kliknij "Tak" w odpowiednim polu poniżej i pozostaw\n" " pola na hasło puste.\n" "\n" "

    Musisz mieć odpowiednie uprawnienia aby założyć nową listę.\n" " Każdy serwer powinien mieć hasło osoby uprawnionej do tworzenia " "nowych list,\n" " które wprowadza się w polu na dole strony. Można też użyć\n" " hasła administratora serwera.\n" " " #: Mailman/Cgi/create.py:331 msgid "List Identity" msgstr "Dane listy" #: Mailman/Cgi/create.py:336 msgid "Name of list:" msgstr "Nazwa listy:" #: Mailman/Cgi/create.py:343 msgid "Initial list owner address:" msgstr "Adres administratora listy:" #: Mailman/Cgi/create.py:352 msgid "Auto-generate initial list password?" msgstr "Wygenerować automatycznie hasło listy?" #: Mailman/Cgi/create.py:360 msgid "Initial list password:" msgstr "Początkowe hasło listy:" #: Mailman/Cgi/create.py:366 msgid "Confirm initial password:" msgstr "Potwierdź hasło:" #: Mailman/Cgi/create.py:381 msgid "List Characteristics" msgstr "Dodatkowe ustawienia listy" #: Mailman/Cgi/create.py:385 msgid "" "Should new members be quarantined before they\n" " are allowed to post unmoderated to this list? Answer Yes to " "hold\n" " new member postings for moderator approval by default." msgstr "" "Czy wstrzymywać do moderowania wiadomości od nowo zapisanych osób? Odpowiedź " "Tak oznacza, że domyślnie wiadomości od wszystkich nowych " "subskrybentów będą moderowane." #: Mailman/Cgi/create.py:414 msgid "" "Initial list of supported languages.

    Note that if you do not\n" " select at least one initial language, the list will use the server\n" " default language of %(deflang)s" msgstr "" "Lista obsługiwanych języków.

    Uwaga: jeśli nie zostanie wybrany\n" " żaden język, domyślnie ustawiony zostanie język \n" " %(deflang)s" #: Mailman/Cgi/create.py:425 msgid "Send \"list created\" email to list owner?" msgstr "Wysłać e-mail o założeniu listy do administratora?" #: Mailman/Cgi/create.py:434 msgid "List creator's (authentication) password:" msgstr "Hasło osoby uprawnionej do tworzenia nowych list:" #: Mailman/Cgi/create.py:439 msgid "Create List" msgstr "Utwórz listę" #: Mailman/Cgi/create.py:440 msgid "Clear Form" msgstr "Wyczyść formularz" #: Mailman/Cgi/edithtml.py:45 msgid "General list information page" msgstr "Główna strona informacyjna listy" #: Mailman/Cgi/edithtml.py:46 msgid "Subscribe results page" msgstr "Strona z potwierdzeniem prenumeraty" #: Mailman/Cgi/edithtml.py:47 msgid "User specific options page" msgstr "Strona opcji dla użytkowników" #: Mailman/Cgi/edithtml.py:48 msgid "Welcome email text file" msgstr "Tekst maila powitalnego" #: Mailman/Cgi/edithtml.py:49 #, fuzzy msgid "Digest masthead" msgstr "nagłówek paczki" #: Mailman/Cgi/edithtml.py:61 msgid "List name is required." msgstr "Nazwa listy jest niezbędna." #: Mailman/Cgi/edithtml.py:103 msgid "%(realname)s -- Edit html for %(template_info)s" msgstr "%(realname)s -- Edytuj strony HTML dla szablonu %(template_info)s" #: Mailman/Cgi/edithtml.py:109 msgid "Edit HTML : Error" msgstr "Edycja HTML : Błąd" #: Mailman/Cgi/edithtml.py:110 msgid "%(safetemplatename)s: Invalid template" msgstr "%(safetemplatename)s: Nieprawidłowy szablon" #: Mailman/Cgi/edithtml.py:115 Mailman/Cgi/edithtml.py:116 msgid "%(realname)s -- HTML Page Editing" msgstr "%(realname)s -- Edycja stron HTML" #: Mailman/Cgi/edithtml.py:117 msgid "Select page to edit:" msgstr "Wybierz stronę do edycji:" #: Mailman/Cgi/edithtml.py:143 msgid "View or edit the list configuration information." msgstr "Pokaż lub edytuj konfigurację listy." #: Mailman/Cgi/edithtml.py:152 msgid "When you are done making changes..." msgstr "Po dokonaniu zmian..." #: Mailman/Cgi/edithtml.py:153 msgid "Submit Changes" msgstr "Zapisz zmiany" #: Mailman/Cgi/edithtml.py:160 msgid "Can't have empty html page." msgstr "Nie można ustawić pustej strony HTML." #: Mailman/Cgi/edithtml.py:161 msgid "HTML Unchanged." msgstr "Strona HTML niezmieniona." #: Mailman/Cgi/edithtml.py:167 msgid "" "The page you saved contains suspicious HTML that could\n" "potentially expose your users to cross-site scripting attacks. This change\n" "has therefore been rejected. If you still want to make these changes, you\n" "must have shell access to your Mailman server.\n" " " msgstr "" "Zapisana strona zawiera podejrzany kod HTML, który może zostać wykorzystany\n" " do ataków typu cross-site scripting.\n" "Z tego powodu zmiany zostały odrzucone. Aby je wprowadzić, konieczny bedzie\n" "bezpośredni dostęp do serwera, na którym zainstalowany jest Mailman.\n" " " #: Mailman/Cgi/edithtml.py:172 msgid "See " msgstr "Zobacz" #: Mailman/Cgi/edithtml.py:175 msgid "FAQ 4.48." msgstr "FAQ 4.48." #: Mailman/Cgi/edithtml.py:176 msgid "Page Unchanged." msgstr "Strona nie została zmieniona." #: Mailman/Cgi/edithtml.py:194 msgid "HTML successfully updated." msgstr "Strona HTML została zaktualizowana." #: Mailman/Cgi/listinfo.py:77 msgid "%(hostname)s Mailing Lists" msgstr "Listy dostępne na serwerze %(hostname)s" #: Mailman/Cgi/listinfo.py:111 msgid "" "

    There currently are no publicly-advertised\n" " %(mailmanlink)s mailing lists on %(hostname)s." msgstr "" "

    Nie ma obecnie żadnych, publicznie dostępnych %(mailmanlink)s\n" " list na serwerze %(hostname)s." #: Mailman/Cgi/listinfo.py:115 msgid "" "

    Below is a listing of all the public mailing lists on\n" " %(hostname)s. Click on a list name to get more information " "about\n" " the list, or to subscribe, unsubscribe, and change the " "preferences\n" " on your subscription." msgstr "" "

    Poniżej znajdziesz wykaz\n" " list dostępnych na serwerze %(hostname)s. Kliknij\n" " nazwę listy, aby zapisać się na listę\n" " zmienić ustawienia subskrypcji,\n" " lub wypisać się." #: Mailman/Cgi/listinfo.py:121 msgid "right" msgstr "prawo" #: Mailman/Cgi/listinfo.py:124 msgid "" " To visit the general information page for an unadvertised list,\n" " open a URL similar to this one, but with a '/' and the %(adj)s\n" " list name appended.\n" "

    List administrators, you can visit " msgstr "" " Wejście do opcji konfiguracyjnych listy ukrytej wymaga otworzenia URL\n" " podobnego do aktualnego, ale ze znakiem '/'\n" " i nazwą %(adj)s listy na końcu.\n" "

    Opiekunowie list mogą przejść na " #: Mailman/Cgi/listinfo.py:129 msgid "the list admin overview page" msgstr "główną stronę administracyjną" #: Mailman/Cgi/listinfo.py:130 msgid "" " to find the management interface for your list.\n" "

    If you are having trouble using the lists, please contact " msgstr "" ".\n" "

    Pytania i komentarze kieruj do " #: Mailman/Cgi/listinfo.py:208 msgid "Edit Options" msgstr "Edytuj opcje" #: Mailman/Cgi/listinfo.py:215 Mailman/Cgi/options.py:876 #: Mailman/Cgi/roster.py:118 msgid "View this page in" msgstr "Przełącz język na" #: Mailman/Cgi/options.py:58 Mailman/Cgi/options.py:75 msgid "CGI script error" msgstr "Błąd skryptu CGI" #: Mailman/Cgi/options.py:61 msgid "Invalid options to CGI script." msgstr "Nieprawidłowe opcje dla skryptu CGI." #: Mailman/Cgi/options.py:109 msgid "No address given" msgstr "Nie podano adresu" #: Mailman/Cgi/options.py:121 msgid "Illegal Email Address: %(safeuser)s" msgstr "Nieprawidłowy adres: %(safeuser)s" #: Mailman/Cgi/options.py:128 Mailman/Cgi/options.py:193 #: Mailman/Cgi/options.py:215 Mailman/Cgi/private.py:154 msgid "No such member: %(safeuser)s." msgstr "Nie znaleziono prenumeratora: %(safeuser)s." #: Mailman/Cgi/options.py:178 msgid "" "Your unsubscription request has been\n" " forwarded to the list administrator for approval." msgstr "" "Twoja prośba o wypisanie została przekazana do opiekuna \n" "listy i czeka na jego potwierdzenie." #: Mailman/Cgi/options.py:184 Mailman/Cgi/options.py:198 msgid "The confirmation email has been sent." msgstr "Potwierdzenie zostało wysłane." #: Mailman/Cgi/options.py:209 Mailman/Cgi/options.py:221 #: Mailman/Cgi/options.py:278 msgid "A reminder of your password has been emailed to you." msgstr "Email z przypomnieniem hasła został wysłany." #: Mailman/Cgi/options.py:250 msgid "Authentication failed." msgstr "Błąd uwierzytelnienia." #: Mailman/Cgi/options.py:285 msgid "" "The list administrator may not view the other\n" " subscriptions for this user." msgstr "" #: Mailman/Cgi/options.py:286 Mailman/Cgi/options.py:335 #: Mailman/Cgi/options.py:463 Mailman/Cgi/options.py:679 msgid "Note: " msgstr "" #: Mailman/Cgi/options.py:291 msgid "List subscriptions for %(safeuser)s on %(hostname)s" msgstr "" "Listy zaprenumerowane przez użytkownika %(safeuser)s na serwerze %(hostname)s" #: Mailman/Cgi/options.py:294 msgid "" "Click on a link to visit your options page for the\n" " requested mailing list." msgstr "" "Kliknij odnośnik, aby przejść na stronę z opcjami dla wybranej\n" " listy." #: Mailman/Cgi/options.py:305 msgid "nomail" msgstr "" #: Mailman/Cgi/options.py:332 msgid "" "The list administrator may not change the names\n" " or addresses for this user's other subscriptions. However, the\n" " subscription for this mailing list has been changed." msgstr "" #: Mailman/Cgi/options.py:355 msgid "Addresses did not match!" msgstr "Adresy nie są identyczne!" #: Mailman/Cgi/options.py:360 msgid "You are already using that email address" msgstr "Ten adres jest już na liście" #: Mailman/Cgi/options.py:372 msgid "" "The new address you requested %(newaddr)s is already a member of the\n" "%(listname)s mailing list, however you have also requested a global change " "of\n" "address. Upon confirmation, any other mailing list containing the address\n" "%(safeuser)s will be changed. " msgstr "" "Podany adres %(newaddr)s jest już zapisany na listę %(listname)s. Włączona " "jest globalna zmiana adresów, a więc po potwierdzeniu adres %(safeuser)s " "występujący \n" "we wszystkich innych listach zostanie zmieniony." #: Mailman/Cgi/options.py:381 msgid "The new address is already a member: %(newaddr)s" msgstr "%(newaddr)s jest już zapisany na listę." #: Mailman/Cgi/options.py:387 msgid "Addresses may not be blank" msgstr "Pole adresu nie może być puste" #: Mailman/Cgi/options.py:401 msgid "A confirmation message has been sent to %(newaddr)s. " msgstr "Potwierdzenie zostało wysłane do %(newaddr)s" #: Mailman/Cgi/options.py:410 msgid "Bad email address provided" msgstr "Wprowadziłeś błędny adres" #: Mailman/Cgi/options.py:412 msgid "Illegal email address provided" msgstr "Nieprawidłowy adres" #: Mailman/Cgi/options.py:414 msgid "%(newaddr)s is already a member of the list." msgstr "%(newaddr)s jest już zapisany na listę." #: Mailman/Cgi/options.py:417 msgid "" "%(newaddr)s is banned from this list. If you\n" " think this restriction is erroneous, please contact\n" " the list owners at %(owneraddr)s." msgstr "" "Adres %(newaddr)s jest na czarnej liście. Jeżeli uważasz, że \n" "doszło do tego przez pomyłkę, skontaktuj się z opiekunem listy \n" " - %(owneraddr)s." #: Mailman/Cgi/options.py:428 msgid "Member name successfully changed. " msgstr "Imię i nazwisko prenumeratora zmienione." #: Mailman/Cgi/options.py:438 msgid "" "The list administrator may not change the\n" " password for a user." msgstr "" "Administrator listy nie ma możliwości \n" "zmiany hasła użytkownika." #: Mailman/Cgi/options.py:447 msgid "Passwords may not be blank" msgstr "Hasła nie mogą być puste" #: Mailman/Cgi/options.py:452 msgid "Passwords did not match!" msgstr "Hasła nie były identyczne!" #: Mailman/Cgi/options.py:460 msgid "" "The list administrator may not change the\n" " password for this user's other subscriptions. However, the\n" " password for this mailing list has been changed." msgstr "" "Administrator listy nie może zmienić hasła zabezpieczającego\n" " inne subskrypcje użytkownika. Hasło dla bieżącej listy\n" " zostało zmienione." #: Mailman/Cgi/options.py:477 Mailman/Commands/cmd_password.py:83 #: Mailman/Commands/cmd_password.py:109 msgid "Password successfully changed." msgstr "Hasło zmienione." #: Mailman/Cgi/options.py:486 msgid "" "You must confirm your unsubscription request by turning\n" " on the checkbox below the Unsubscribe button. You\n" " have not been unsubscribed!" msgstr "" "Musisz potwierdzić prośbę o wypisanie poprzez zaznaczenie opcji\n" " Wypisz poniżej. Nie zostałeś wypisany!" #: Mailman/Cgi/options.py:518 msgid "Unsubscription results" msgstr "Raport z wypisywania" #: Mailman/Cgi/options.py:522 msgid "" "Your unsubscription request has been received and\n" " forwarded on to the list moderators for approval. You will\n" " receive notification once the list moderators have made their\n" " decision." msgstr "" "Otrzymano prośbę o wypisanie się. Została ona przekazana \n" " opiekunowi listy i czeka na jego decyzję, o której \n" " zostaniesz poinformowany emailem." #: Mailman/Cgi/options.py:527 msgid "" "You have been successfully unsubscribed from the\n" " mailing list %(fqdn_listname)s. If you were receiving digest\n" " deliveries you may get one more digest. If you have any " "questions\n" " about your unsubscription, please contact the list owners at\n" " %(owneraddr)s." msgstr "" "Zostałeś wypisany z listy\n" " %(fqdn_listname)s. Jeśli miałeś włączoną opcję dostarczania\n" " paczek, być może otrzymasz jeszcze jedną. Jeśli masz pytania\n" " związane z wypisaniem, skontaktuj się z administratorem listy\n" " - %(owneraddr)s." #: Mailman/Cgi/options.py:676 msgid "" "The list administrator may not change the\n" " options for this user's other subscriptions. However the\n" " options for this mailing list subscription has been\n" " changed." msgstr "" #: Mailman/Cgi/options.py:686 msgid "" "The list administrator has disabled digest delivery for\n" " this list, so your delivery option has not been set. However " "your\n" " other options have been set successfully." msgstr "" "Administrator listy wyłączył dostarczanie listów w postaci paczek.\n" " Pozostałe opcje zostały ustawione." #: Mailman/Cgi/options.py:690 msgid "" "The list administrator has disabled non-digest delivery\n" " for this list, so your delivery option has not been set. " "However\n" " your other options have been set successfully." msgstr "" "Administrator listy wyłączył dostarczanie listów pojedynczo (bez paczek)\n" " a zatem tej opcji nie wprowadzono. Pozostałe opcje\n" " zostały ustawione." #: Mailman/Cgi/options.py:694 msgid "You have successfully set your options." msgstr "Opcje zostały ustawione." #: Mailman/Cgi/options.py:697 msgid "You may get one last digest." msgstr "Być może otrzymasz jeszcze jedną paczkę." #: Mailman/Cgi/options.py:769 msgid "Yes, I really want to unsubscribe" msgstr "Tak, chcę się wypisać" #: Mailman/Cgi/options.py:773 msgid "Change My Password" msgstr "Zmień hasło" #: Mailman/Cgi/options.py:776 msgid "List my other subscriptions" msgstr "Wyświetl moje pozostałe subskrypcje" #: Mailman/Cgi/options.py:782 msgid "Email My Password To Me" msgstr "Wyślij mi moje hasło" #: Mailman/Cgi/options.py:784 msgid "password" msgstr "hasło" #: Mailman/Cgi/options.py:786 msgid "Log out" msgstr "Wyloguj się" #: Mailman/Cgi/options.py:788 msgid "Submit My Changes" msgstr "Zatwierdź" #: Mailman/Cgi/options.py:800 msgid "days" msgstr "dni" #: Mailman/Cgi/options.py:802 msgid "day" msgstr "dzień" #: Mailman/Cgi/options.py:803 msgid "%(days)d %(units)s" msgstr "%(days)d %(units)s" #: Mailman/Cgi/options.py:809 msgid "Change My Address and Name" msgstr "Zmień mój adres oraz imię i nazwisko" #: Mailman/Cgi/options.py:835 msgid "No topics defined" msgstr "Nie zdefiniowano tematów" #: Mailman/Cgi/options.py:843 msgid "" "\n" "You are subscribed to this list with the case-preserved address\n" "%(cpuser)s." msgstr "" "\n" "Jesteś zapisany na listę z adresu\n" "%(cpuser)s (z zachowaniem wielkości liter)." #: Mailman/Cgi/options.py:857 msgid "%(realname)s list: member options login page" msgstr "Lista %(realname)s: strona logowania dla prenumeratorów" #: Mailman/Cgi/options.py:858 msgid "email address and " msgstr "adres email oraz " #: Mailman/Cgi/options.py:861 msgid "%(realname)s list: member options for user %(safeuser)s" msgstr "Lista %(realname)s: opcje prenumeratora %(safeuser)s" #: Mailman/Cgi/options.py:887 msgid "" "In order to change your membership option, you must\n" " first log in by giving your %(extra)smembership password in the section\n" " below. If you don't remember your membership password, you can have it\n" " emailed to you by clicking on the button below. If you just want to\n" " unsubscribe from this list, click on the Unsubscribe button and " "a\n" " confirmation message will be sent to you.\n" "\n" "

    Important: From this point on, you must " "have\n" " cookies enabled in your browser, otherwise none of your changes will " "take\n" " effect.\n" " " msgstr "" "Aby zmienić swoje opcje musisz najpierw się zalogować\n" " podając hasło %(extra)sprenumeratora poniżej.\n" " Jeśli nie pamiętasz hasła, możesz je otrzymać e-mailem po kliknięciu\n" " odpowiedniego przycisku. Jeśli chcesz się wypisać,\n" " kliknij na przycisk Wypisz. \n" " Otrzymasz list z prośbą o potwierdzenie wypisania się.\n" "\n" "

    Uwaga:Odtąd musisz mieć włączoną\n" " obsługę ciasteczek w przeglądarce, bo w przeciwnym razie zmiany\n" " nie zadziałają.\n" " " #: Mailman/Cgi/options.py:901 msgid "Email address:" msgstr "Adres email:" #: Mailman/Cgi/options.py:905 msgid "Password:" msgstr "Hasło:" #: Mailman/Cgi/options.py:907 msgid "Log in" msgstr "Zaloguj" #: Mailman/Cgi/options.py:915 msgid "" "By clicking on the Unsubscribe button, a\n" " confirmation message will be emailed to you. This message will have a\n" " link that you should click on to complete the removal process (you can\n" " also confirm by email; see the instructions in the confirmation\n" " message)." msgstr "" "Po kliknięciu na przycisk Wypisz,\n" " otrzymasz email z prośbą o potwierdzenie wypisania. Email ten " "będzie\n" " zawierał odsyłacz, który należy kliknąć, aby dokończyć\n" " proces wypisywania się (możesz też wysłać potwierdzenie emailem; " "przeczytaj\n" " instrukcje w wysłanym potwierdzeniu)." #: Mailman/Cgi/options.py:923 msgid "Password reminder" msgstr "Przypomnienie hasła" #: Mailman/Cgi/options.py:927 msgid "" "By clicking on the Remind button, your\n" " password will be emailed to you." msgstr "" "Po kliknięciu przycisku Przypomnij, Twoje\n" " hasło zostanie przesłane e-mailem." #: Mailman/Cgi/options.py:930 msgid "Remind" msgstr "Przypomnij" #: Mailman/Cgi/options.py:1030 Mailman/ListAdmin.py:225 msgid "" msgstr "" #: Mailman/Cgi/options.py:1041 msgid "Requested topic is not valid: %(topicname)s" msgstr "Żądany temat jest nieprawidłowy: %(topicname)s" #: Mailman/Cgi/options.py:1046 msgid "Topic filter details" msgstr "Szczegóły filtra tematycznego" #: Mailman/Cgi/options.py:1049 msgid "Name:" msgstr "Nazwa:" #: Mailman/Cgi/options.py:1051 msgid "Pattern (as regexp):" msgstr "Wzorzec (wyrażenie regularne)" #: Mailman/Cgi/private.py:64 msgid "Private Archive Error" msgstr "Błąd prywatnego archiwum" #: Mailman/Cgi/private.py:65 msgid "You must specify a list." msgstr "Musisz wybrać listę." #: Mailman/Cgi/private.py:72 msgid "Private archive - \"./\" and \"../\" not allowed in URL." msgstr "" #: Mailman/Cgi/private.py:109 msgid "Private Archive Error - %(msg)s" msgstr "Błąd prywatnego archiwum - %(msg)s" #: Mailman/Cgi/private.py:141 #, fuzzy msgid "" "If you are a list member,\n" " your password has been emailed to you." msgstr "Email z przypomnieniem hasła został wysłany." #: Mailman/Cgi/private.py:145 #, fuzzy msgid "Please enter your email address" msgstr "Adres email:" #: Mailman/Cgi/private.py:206 msgid "Private archive file not found" msgstr "Plik archiwum nie znaleziony" #: Mailman/Cgi/rmlist.py:65 #, fuzzy msgid "No such list %(safelistname)s" msgstr "Lista %(listname)s nie istnieje na tym serwerze" #: Mailman/Cgi/rmlist.py:83 msgid "You're being a sneaky list owner!" msgstr "Ty sprytny administratorze!" #: Mailman/Cgi/rmlist.py:121 msgid "You are not authorized to delete this mailing list" msgstr "Nie masz uprawnień do skasowania tej listy" #: Mailman/Cgi/rmlist.py:162 msgid "Mailing list deletion results" msgstr "Raport z usunięcia listy " #: Mailman/Cgi/rmlist.py:169 msgid "" "You have successfully deleted the mailing list\n" " %(listname)s." msgstr " %(listname)s została usunięta." #: Mailman/Cgi/rmlist.py:173 msgid "" "There were some problems deleting the mailing list\n" " %(listname)s. Contact your site administrator at %(sitelist)" "s\n" " for details." msgstr "" "Pojawiło się kilka problemów podczas usuwania \n" " listy %(listname)s. Wyjaśnij sprawę z \n" " administratorem serwera %(sitelist)s." #: Mailman/Cgi/rmlist.py:190 msgid "Permanently remove mailing list %(realname)s" msgstr "Usuń listę %(realname)s (tej czynności nie można odwrócić)" #: Mailman/Cgi/rmlist.py:191 #, fuzzy msgid "Permanently remove mailing list %(realname)s" msgstr "Usuń listę %(realname)s (tej czynności nie można odwrócić)" #: Mailman/Cgi/rmlist.py:204 msgid "" "This page allows you as the list owner, to permanently\n" " remove this mailing list from the system. This action is not\n" " undoable so you should undertake it only if you are absolutely\n" " sure this mailing list has served its purpose and is no longer " "necessary.\n" "\n" "

    Note that no warning will be sent to your list members and after " "this\n" " action, any subsequent messages sent to the mailing list, or any of its\n" " administrative addreses will bounce.\n" "\n" "

    You also have the option of removing the archives for this mailing " "list\n" " at this time. It is almost always recommended that you do\n" " not remove the archives, since they serve as the\n" " historical record of your mailing list.\n" "\n" "

    For your safety, you will be asked to reconfirm the list password.\n" " " msgstr "" "Strona umożliwia administratorowi usunięcie tej listy\n" " z systemu. Tej operacji nie można\n" " cofnąć, a zatem powinieneś używać jej tylko wtedy, gdy\n" " jesteś absolutnie pewien, że lista nie jest już potrzebna.\n" "\n" "

    Do subskrybentów nie zostanie wysłana żadna informacja,\n" " a po skasowaniu listy wszelkie wiadomości wysyłane na\n" " nią i na adresy administracyjne będą odbijane.\n" "\n" "

    Możesz również skasować archiwa listy.\n" " W większości przypadków zalecane jest jednak\n" " pozostawienie archiwów jako historii\n" " listy.\n" "\n" "

    Dla bezpieczeństwa zostaniesz ponownie zapytany o hasło.\n" " " #: Mailman/Cgi/rmlist.py:225 msgid "List password:" msgstr "Hasło listy:" #: Mailman/Cgi/rmlist.py:229 msgid "Also delete archives?" msgstr "Skasować archiwa?" #: Mailman/Cgi/rmlist.py:237 msgid "Cancel and return to list administration" msgstr "Anuluj i powróć do administracji listą" #: Mailman/Cgi/rmlist.py:240 msgid "Delete this list" msgstr "Usuń listę" #: Mailman/Cgi/roster.py:48 Mailman/Cgi/subscribe.py:52 msgid "Invalid options to CGI script" msgstr "Nieprawidłowe opcje dla skryptu CGI" #: Mailman/Cgi/roster.py:106 msgid "%(realname)s roster authentication failed." msgstr "%(realname)s - błąd uwierzytelnienia." #: Mailman/Cgi/roster.py:134 Mailman/Cgi/roster.py:135 #: Mailman/Cgi/subscribe.py:51 Mailman/Cgi/subscribe.py:62 msgid "Error" msgstr "Błąd" #: Mailman/Cgi/subscribe.py:115 msgid "You must supply a valid email address." msgstr "Musisz wprowadzić prawidłowy adres e-mail.
    " #: Mailman/Cgi/subscribe.py:138 msgid "The form is too old. Please GET it again." msgstr "" #: Mailman/Cgi/subscribe.py:141 msgid "Please take a few seconds to fill out the form before submitting it." msgstr "" #: Mailman/Cgi/subscribe.py:144 msgid "You must GET the form before submitting it." msgstr "" #: Mailman/Cgi/subscribe.py:148 msgid "You may not subscribe a list to itself!" msgstr "Nie możesz zapisać adresu listy na listę!" #: Mailman/Cgi/subscribe.py:156 msgid "If you supply a password, you must confirm it." msgstr "Jeśli wprowadzasz hasło, musisz je potwierdzić." #: Mailman/Cgi/subscribe.py:158 msgid "Your passwords did not match." msgstr "Hasła nie są identyczne." #: Mailman/Cgi/subscribe.py:192 msgid "" "Your subscription request has been received, and will soon be acted upon.\n" "Depending on the configuration of this mailing list, your subscription " "request\n" "may have to be first confirmed by you via email, or approved by the list\n" "moderator. If confirmation is required, you will soon get a confirmation\n" "email which contains further instructions." msgstr "" "Została otrzymana prośba o zapisanie się. W zależności od konfiguracji\n" "listy, może być wymagane potwierdzenie emailem lub \n" "zgoda moderatora. Jeśli wymagane jest potwierdzenie, wkrótce dostaniesz \n" "emaila z dalszymi wskazówkami." #: Mailman/Cgi/subscribe.py:206 msgid "" "The email address you supplied is banned from this\n" " mailing list. If you think this restriction is erroneous, please\n" " contact the list owners at %(listowner)s." msgstr "" "Twój adres email jest na czarnej liście adresów.\n" " Jeśli uważasz, że doszło tego przez pomyłkę, skontaktuj\n" " się z opiekunem listy %(listowner)s." #: Mailman/Cgi/subscribe.py:210 msgid "" "The email address you supplied is not valid. (E.g. it must contain an\n" "`@'.)" msgstr "Podany adres email jest nie poprawny, n.p. musi zawierać znak `@'." #: Mailman/Cgi/subscribe.py:214 msgid "" "Your subscription is not allowed because the email address you gave is\n" "insecure." msgstr "" "Nie możesz się zapisać, ponieważ podany adres e-mail nie jest bezpieczny." #: Mailman/Cgi/subscribe.py:222 msgid "" "Confirmation from your email address is required, to prevent anyone from\n" "subscribing you without permission. Instructions are being sent to you at\n" "%(email)s. Please note your subscription will not start until you confirm\n" "your subscription." msgstr "" "W celu upewnienia się, że podałeś prawidłowy adres, będziesz musiał jeszcze\n" "odpowiedzieć na wysłaną właśnie wiadomość email.\n" "Sprawdź pocztę dla adresu %(email)s. \n" "Zwróć uwagę na to, że potwierdzenie prenumeraty jest\n" "obowiązkowe." #: Mailman/Cgi/subscribe.py:234 msgid "" "Your subscription request was deferred because %(x)s. Your request has " "been\n" "forwarded to the list moderator. You will receive email informing you of " "the\n" "moderator's decision when they get to your request." msgstr "" "Subskrypcja została odłożona z następującego powodu: %(x)s. Twoja\n" "prośba została skierowana do moderatora listy. Otrzymasz maila\n" "z decyzją moderatora." #: Mailman/Cgi/subscribe.py:241 Mailman/Commands/cmd_confirm.py:61 msgid "You are already subscribed." msgstr "Jesteś już zapisany." #: Mailman/Cgi/subscribe.py:255 msgid "Mailman privacy alert" msgstr "Uwaga dotycząca prywatności" #: Mailman/Cgi/subscribe.py:256 msgid "" "An attempt was made to subscribe your address to the mailing list\n" "%(listaddr)s. You are already subscribed to this mailing list.\n" "\n" "Note that the list membership is not public, so it is possible that a bad\n" "person was trying to probe the list for its membership. This would be a\n" "privacy violation if we let them do this, but we didn't.\n" "\n" "If you submitted the subscription request and forgot that you were already\n" "subscribed to the list, then you can ignore this message. If you suspect " "that\n" "an attempt is being made to covertly discover whether you are a member of " "this\n" "list, and you are worried about your privacy, then feel free to send a " "message\n" "to the list administrator at %(listowner)s.\n" msgstr "" "Zarejestrowano próbę zapisania Twojego adresu na listę\n" "%(listaddr)s. Jesteś już prenumeratorem tej listy.\n" "\n" "Lista prenumeratorów nie jest dostępna publicznie, a zatem istnieje\n" "możliwość, że ktoś próbował sprawdzić czy jesteś faktycznie zapisany\n" "metodą prób i błędów. Byłoby to naruszeniem prywatności, gdyby system\n" "na to zezwalał (a tak nie jest).\n" "\n" "Jeśli omyłkowo wysłałeś prośbę o zapisanie, zapomniawszy że już jesteś\n" "zapisany, możesz zignorować tę wiadomość. Jeśli podejrzewasz, że ktoś " "próbuje\n" "sprawdzić, czy jesteś subskrybentem tej listy\n" "możesz skontaktować się z administratorem:\n" "%(listowner)s.\n" #: Mailman/Cgi/subscribe.py:275 msgid "This list does not support digest delivery." msgstr "Ta lista nie udostępnia trybu paczek." #: Mailman/Cgi/subscribe.py:277 msgid "This list only supports digest delivery." msgstr "Ta lista udostępnia tylko tryb paczek." #: Mailman/Cgi/subscribe.py:284 msgid "You have been successfully subscribed to the %(realname)s mailing list." msgstr "Zostałeś zapisany na listę %(realname)s." #: Mailman/Commands/cmd_confirm.py:18 msgid "" "\n" " confirm \n" " Confirm an action. The confirmation-string is required and should " "be\n" " supplied by a mailback confirmation notice.\n" msgstr "" "\n" " confirm \n" " Prośba o potwierdzenie. Klucz-potwierdzający jest wymagany \n" " i musi znaleźć się w odpowiedzi na tę wiadomość.\n" #: Mailman/Commands/cmd_confirm.py:41 Mailman/Commands/cmd_lists.py:40 #: Mailman/Commands/cmd_set.py:133 Mailman/Commands/cmd_subscribe.py:69 #: Mailman/Commands/cmd_unsubscribe.py:52 Mailman/Commands/cmd_who.py:67 msgid "Usage:" msgstr "Stosowanie:" #: Mailman/Commands/cmd_confirm.py:50 msgid "" "Invalid confirmation string. Note that confirmation strings expire\n" "approximately %(days)s days after the initial subscription request. If " "your\n" "confirmation has expired, please try to re-submit your original request or\n" "message." msgstr "" "Nieprawidłowy kod potwierdzający:\n" "

    Kody potwierdzające wygasają po około\n" " %(days)s dniach od wysłania pierwszej prośby o zapisanie. Jeśli\n" " ten czas już upłynął, spróbuj ponownie wypełnić formularz lub wysłać " "wiadomość." #: Mailman/Commands/cmd_confirm.py:56 msgid "Your request has been forwarded to the list moderator for approval." msgstr "Twoja prośba została przekazana do moderatora w celu potwierdzenia." #: Mailman/Commands/cmd_confirm.py:64 msgid "" "You are not currently a member. Have you already unsubscribed or changed\n" "your email address?" msgstr "" "Nie jesteś prenumeratorem tej listy. Prawdopodobnie wypisałeś się już lub \n" "zmieniłeś swój adres?" #: Mailman/Commands/cmd_confirm.py:69 #, fuzzy msgid "" "You are currently banned from subscribing to this list. If you think this\n" "restriction is erroneous, please contact the list owners at\n" "%(owneraddr)s." msgstr "" "Twój adres jest na czarnej liście adresów. Jeżeli uważasz, że \n" "doszło do tego przez pomyłkę, skontaktuj się z opiekunem listy - \n" "%(owneraddr)s." #: Mailman/Commands/cmd_confirm.py:74 msgid "" "You were not invited to this mailing list. The invitation has been " "discarded,\n" "and both list administrators have been alerted." msgstr "" "Nie zostałeś zaproszony do subskrypcji tej listy. Twoje zaproszenie \n" "wygasło, a opiekunowie obu list zostali o tym powiadomieni." #: Mailman/Commands/cmd_confirm.py:78 msgid "Bad approval password given. Held message is still being held." msgstr "Podano błędne hasło. Wiadomość pozostała wstrzymana." #: Mailman/Commands/cmd_confirm.py:89 Mailman/Commands/cmd_confirm.py:92 #: Mailman/Commands/cmd_confirm.py:95 msgid "Confirmation succeeded" msgstr "Poprawne potwierdzenie" #: Mailman/Commands/cmd_echo.py:17 msgid "" "\n" " echo [args]\n" " Simply echo an acknowledgement. Args are echoed back unchanged.\n" msgstr "" "\n" " echo [tekst]\n" " Wypisanie w odpowiedzi zadany tekst w formie niezmienionej.\n" #: Mailman/Commands/cmd_end.py:17 msgid "" "\n" " end\n" " Stop processing commands. Use this if your mail program " "automatically\n" " adds a signature file.\n" msgstr "" "\n" " end\n" " Zakończenie przetwarzania komend. Użyj tej komendy, jeśli Twój \n" " program automatycznie dodaje sygnaturkę.\n" #: Mailman/Commands/cmd_help.py:17 msgid "" "\n" " help\n" " Print this help message.\n" msgstr "" "\n" " help\n" " Wyświetlenie tego tekstu pomocy.\n" #: Mailman/Commands/cmd_help.py:47 msgid "You can access your personal options via the following url:" msgstr "Możesz zmieniać ustawienia prenumeraty na stronie:" #: Mailman/Commands/cmd_info.py:17 msgid "" "\n" " info\n" " Get information about this mailing list.\n" msgstr "" "\n" " info\n" " Wyświetlenie podstawowych informacji o tej liście. \n" #: Mailman/Commands/cmd_info.py:39 Mailman/Commands/cmd_lists.py:62 msgid "n/a" msgstr "brak" #: Mailman/Commands/cmd_info.py:44 msgid "List name: %(listname)s" msgstr "Nazwa listy: %(listname)s" #: Mailman/Commands/cmd_info.py:45 msgid "Description: %(description)s" msgstr "Opis: %(description)s" #: Mailman/Commands/cmd_info.py:46 msgid "Postings to: %(postaddr)s" msgstr "Adres listy: %(postaddr)s" #: Mailman/Commands/cmd_info.py:47 msgid "List Helpbot: %(requestaddr)s" msgstr "Automat listowy: %(requestaddr)s" #: Mailman/Commands/cmd_info.py:48 msgid "List Owners: %(owneraddr)s" msgstr "Opiekun listy: %(owneraddr)s" #: Mailman/Commands/cmd_info.py:49 msgid "More information: %(listurl)s" msgstr "Więcej informacji: %(listurl)s" #: Mailman/Commands/cmd_join.py:17 msgid "The `join' command is synonymous with `subscribe'.\n" msgstr "Polecenie `join' jest synonimem `subscribe'.\n" #: Mailman/Commands/cmd_leave.py:17 msgid "The `leave' command is synonymous with `unsubscribe'.\n" msgstr "Polecenie `leave' jest synonimem `unsubscribe'.\n" #: Mailman/Commands/cmd_lists.py:17 msgid "" "\n" " lists\n" " See a list of the public mailing lists on this GNU Mailman server.\n" msgstr "" "\n" " lists\n" " Zobacz wykaz list dostępnych na tym serwerze\n" " GNU Mailman.\n" #: Mailman/Commands/cmd_lists.py:44 msgid "Public mailing lists at %(hostname)s:" msgstr "Ogólnie dostępne listy na serwerze %(hostname)s:" #: Mailman/Commands/cmd_lists.py:66 msgid "%(i)3d. List name: %(realname)s" msgstr "%(i)3d. Nazwa listy: %(realname)s" #: Mailman/Commands/cmd_lists.py:67 msgid " Description: %(description)s" msgstr " Opis: %(description)s" #: Mailman/Commands/cmd_lists.py:68 msgid " Requests to: %(requestaddr)s" msgstr " Polecenia na: %(requestaddr)s" #: Mailman/Commands/cmd_password.py:17 msgid "" "\n" " password [ ] [address=

    ]\n" " Retrieve or change your password. With no arguments, this returns\n" " your current password. With arguments and " "\n" " you can change your password.\n" "\n" " If you're posting from an address other than your membership " "address,\n" " specify your membership address with `address=
    ' (no " "brackets\n" " around the email address, and no quotes!). Note that in this case " "the\n" " response is always sent to the subscribed address.\n" msgstr "" "\n" " password [ ] [address=]\n" " Przypomnienie lub zmiana hasła. Komenda wywołana bez argumentów,\n" " powoduje odesłanie Twojego aktualnego hasła. Argumenty \n" " umożliwiają zmianę hasła. \n" "\n" " Wysyłając komendę z adresu innego niż zapisany na listę, możesz\n" " ustalić którego prenumeratora listy dotyczy zmiana hasła za pomocą\n" " parametru 'address=
    ' (bez nawiasów <>). Pamiętaj \n" " jednak, że odpowiedź będzie zawsze wysłana na adres tego \n" " prenumeratora.\n" #: Mailman/Commands/cmd_password.py:51 Mailman/Commands/cmd_password.py:66 msgid "Your password is: %(password)s" msgstr "Twoje hasło to: %(password)s" #: Mailman/Commands/cmd_password.py:57 Mailman/Commands/cmd_password.py:72 #: Mailman/Commands/cmd_password.py:95 Mailman/Commands/cmd_password.py:121 #: Mailman/Commands/cmd_set.py:149 Mailman/Commands/cmd_set.py:219 msgid "You are not a member of the %(listname)s mailing list" msgstr "Nie jesteś członkiem listy %(listname)s" #: Mailman/Commands/cmd_password.py:85 Mailman/Commands/cmd_password.py:111 msgid "" "You did not give the correct old password, so your password has not been\n" "changed. Use the no argument version of the password command to retrieve " "your\n" "current password, then try again." msgstr "" "Podałeś niepoprawne stare hasło, a więc hasło nie zostało zmienione na \n" "nowe. Skorzystaj z komendy bez argumentów, żeby przypomnieć sobie \n" "hasło, a potem spróbuj ponownie." #: Mailman/Commands/cmd_password.py:89 Mailman/Commands/cmd_password.py:115 msgid "" "\n" "Usage:" msgstr "" "\n" "Użycie:" #: Mailman/Commands/cmd_remove.py:17 msgid "The `remove' command is synonymous with `unsubscribe'.\n" msgstr "Polecenie 'remove' jest synonimem 'unsubscribe'.\n" #: Mailman/Commands/cmd_set.py:26 msgid "" "\n" " set ...\n" " Set or view your membership options.\n" "\n" " Use `set help' (without the quotes) to get a more detailed list of " "the\n" " options you can change.\n" "\n" " Use `set show' (without the quotes) to view your current option\n" " settings.\n" msgstr "" "\n" " set ...\n" " Zmiana lub sprawdzenie opcji prenumeraty.\n" "\n" " Wyślij 'set help' (bez apostrofów), a dostaniesz szczegółową \n" " listę dostępnych opcji.\n" "\n" " Wyślij 'set show' (bez apostrofów), a otrzymasz listę aktualnie\n" " ustawionych opcji dla Twojej subskrypcji.\n" #: Mailman/Commands/cmd_set.py:37 msgid "" "\n" " set help\n" " Show this detailed help.\n" "\n" " set show [address=
    ]\n" " View your current option settings. If you're posting from an " "address\n" " other than your membership address, specify your membership address\n" " with `address=
    ' (no brackets around the email address, and " "no\n" " quotes!).\n" "\n" " set authenticate [address=
    ]\n" " To set any of your options, you must include this command first, " "along\n" " with your membership password. If you're posting from an address\n" " other than your membership address, specify your membership address\n" " with `address=
    ' (no brackets around the email address, and " "no\n" " quotes!).\n" "\n" " set ack on\n" " set ack off\n" " When the `ack' option is turned on, you will receive an\n" " acknowledgement message whenever you post a message to the list.\n" "\n" " set digest plain\n" " set digest mime\n" " set digest off\n" " When the `digest' option is turned off, you will receive postings\n" " immediately when they are posted. Use `set digest plain' if " "instead\n" " you want to receive postings bundled into a plain text digest\n" " (i.e. RFC 1153 digest). Use `set digest mime' if instead you want " "to\n" " receive postings bundled together into a MIME digest.\n" "\n" " set delivery on\n" " set delivery off\n" " Turn delivery on or off. This does not unsubscribe you, but " "instead\n" " tells Mailman not to deliver messages to you for now. This is " "useful\n" " if you're going on vacation. Be sure to use `set delivery on' when\n" " you return from vacation!\n" "\n" " set myposts on\n" " set myposts off\n" " Use `set myposts off' to not receive copies of messages you post to\n" " the list. This has no effect if you're receiving digests.\n" "\n" " set hide on\n" " set hide off\n" " Use `set hide on' to conceal your email address when people request\n" " the membership list.\n" "\n" " set duplicates on\n" " set duplicates off\n" " Use `set duplicates off' if you want Mailman to not send you " "messages\n" " if your address is explicitly mentioned in the To: or Cc: fields of\n" " the message. This can reduce the number of duplicate postings you\n" " will receive.\n" "\n" " set reminders on\n" " set reminders off\n" " Use `set reminders off' if you want to disable the monthly password\n" " reminder for this mailing list.\n" msgstr "" #: Mailman/Commands/cmd_set.py:122 msgid "Bad set command: %(subcmd)s" msgstr "Błędne polecenie set: %(subcmd)s" #: Mailman/Commands/cmd_set.py:151 msgid "Your current option settings:" msgstr "Twoje aktualne ustawienia:" #: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191 #: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198 #: Mailman/Commands/cmd_set.py:202 msgid "off" msgstr "wyłączone" #: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191 #: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198 #: Mailman/Commands/cmd_set.py:202 msgid "on" msgstr "włączone" #: Mailman/Commands/cmd_set.py:154 msgid " ack %(onoff)s" msgstr " powiadamianie %(onoff)s" #: Mailman/Commands/cmd_set.py:160 msgid " digest plain" msgstr " paczki tekstowe" #: Mailman/Commands/cmd_set.py:162 msgid " digest mime" msgstr " paczki mime" #: Mailman/Commands/cmd_set.py:164 msgid " digest off" msgstr " paczki wyłączone" #: Mailman/Commands/cmd_set.py:169 msgid "delivery on" msgstr "dostarczanie włączone" #: Mailman/Commands/cmd_set.py:171 Mailman/Commands/cmd_set.py:174 #: Mailman/Commands/cmd_set.py:177 Mailman/Commands/cmd_set.py:181 msgid "delivery off" msgstr "dostarczanie wyłączone" #: Mailman/Commands/cmd_set.py:172 msgid "by you" msgstr "przez Ciebie" #: Mailman/Commands/cmd_set.py:175 msgid "by the admin" msgstr "przez administratora" #: Mailman/Commands/cmd_set.py:178 msgid "due to bounces" msgstr "z powodu zwrotów" #: Mailman/Commands/cmd_set.py:186 msgid " %(status)s (%(how)s on %(date)s)" msgstr " %(status)s (%(how)s dnia %(date)s)" #: Mailman/Commands/cmd_set.py:192 msgid " myposts %(onoff)s" msgstr " moje listy %(onoff)s" #: Mailman/Commands/cmd_set.py:195 msgid " hide %(onoff)s" msgstr " ukryj %(onoff)s" #: Mailman/Commands/cmd_set.py:199 msgid " duplicates %(onoff)s" msgstr " kopie %(onoff)s" #: Mailman/Commands/cmd_set.py:203 msgid " reminders %(onoff)s" msgstr " przypomnienia %(onoff)s" #: Mailman/Commands/cmd_set.py:224 msgid "You did not give the correct password" msgstr "Podałeś niepoprawne hasło" #: Mailman/Commands/cmd_set.py:236 Mailman/Commands/cmd_set.py:283 msgid "Bad argument: %(arg)s" msgstr "Niepoprawne argumenty: %(arg)s" #: Mailman/Commands/cmd_set.py:241 Mailman/Commands/cmd_set.py:261 msgid "Not authenticated" msgstr "Błąd uwierzytelnienia" #: Mailman/Commands/cmd_set.py:254 msgid "ack option set" msgstr "powiadamianie włączone" #: Mailman/Commands/cmd_set.py:286 msgid "digest option set" msgstr "opcje trybu paczek" #: Mailman/Commands/cmd_set.py:301 msgid "delivery enabled" msgstr "dostarczanie włączone" #: Mailman/Commands/cmd_set.py:304 msgid "delivery disabled by user" msgstr "dostarczanie wyłączone przez użytkownika" #: Mailman/Commands/cmd_set.py:316 msgid "myposts option set" msgstr "opcje moich wiadomości" #: Mailman/Commands/cmd_set.py:327 msgid "hide option set" msgstr "opcje ukrywania" #: Mailman/Commands/cmd_set.py:339 msgid "duplicates option set" msgstr "opcje powtarzania" #: Mailman/Commands/cmd_set.py:351 msgid "reminder option set" msgstr "opcje przypominania" #: Mailman/Commands/cmd_stop.py:17 msgid "stop is synonymous with the end command.\n" msgstr "" "polecenie stop powoduje zaprzestanie przetwarzania kolejnych poleceń.\n" #: Mailman/Commands/cmd_subscribe.py:17 msgid "" "\n" " subscribe [password] [digest|nodigest] [address=
    ]\n" " Subscribe to this mailing list. Your password must be given to\n" " unsubscribe or change your options, but if you omit the password, " "one\n" " will be generated for you. You may be periodically reminded of " "your\n" " password.\n" "\n" " The next argument may be either: `nodigest' or `digest' (no " "quotes!).\n" " If you wish to subscribe an address other than the address you sent\n" " this request from, you may specify `address=
    ' (no brackets\n" " around the email address, and no quotes!)\n" msgstr "" "\n" " subscribe [hasło] [digest|nodigest] [address=]\n" " Zapisanie się na listę. Hasło będzie potrzebne\n" " do wypisania się lub zmiany opcji subskrypcji. Jeżeli nie\n" " podasz go podczas zapisywania, system wygeneruje je \n" " automatycznie. Możesz co miesiąc dostawać przypomnienie \n" " swojego hasła.\n" "\n" " Drugi argument oznacza, tryb otrzymywania wiadomości. Opcja 'digest'\n" " spowoduje, że wiadomości z listy będziesz dostawać w formie \n" " codziennych paczek. W trybie 'nondigest' wiadomości dostarczane \n" " są natychmiast.\n" " Podając argument 'address=', można zapisać na się na \n" " listę z innego adresu niż ten w polu nadawcy. \n" #: Mailman/Commands/cmd_subscribe.py:62 msgid "Bad digest specifier: %(arg)s" msgstr "Błędne określenie trybu dostarczania: %(arg)s" #: Mailman/Commands/cmd_subscribe.py:92 msgid "No valid address found to subscribe" msgstr "W wiadomości nie znaleziono adresu do zapisania" #: Mailman/Commands/cmd_subscribe.py:113 msgid "" "The email address you supplied is banned from this mailing list.\n" "If you think this restriction is erroneous, please contact the list\n" "owners at %(listowner)s." msgstr "" "Twój adres jest na czarnej liście adresów. Jeżeli uważasz, że \n" "doszło do tego przez pomyłkę, skontaktuj się z opiekunem listy \n" " %(listowner)s." #: Mailman/Commands/cmd_subscribe.py:119 msgid "" "Mailman won't accept the given email address as a valid address.\n" "(E.g. it must have an @ in it.)" msgstr "" "Mailman nie rozpoznał podanego adresu email, jako poprawny \n" "(np. adres musi zawierać znak @)" #: Mailman/Commands/cmd_subscribe.py:124 msgid "" "Your subscription is not allowed because\n" "the email address you gave is insecure." msgstr "" "Podany adres wydaje się błędny. \n" "subskrypcja nie będzie zrealizowana." #: Mailman/Commands/cmd_subscribe.py:129 msgid "You are already subscribed!" msgstr "Jesteś już zapisany!" #: Mailman/Commands/cmd_subscribe.py:133 msgid "No one can subscribe to the digest of this list!" msgstr "Nie możesz zapisać się na tę listę w trybie paczek!" #: Mailman/Commands/cmd_subscribe.py:136 msgid "This list only supports digest subscriptions!" msgstr "Ta lista umożliwia zapisywanie się tylko w trybie paczek!" #: Mailman/Commands/cmd_subscribe.py:142 msgid "" "Your subscription request has been forwarded to the list administrator\n" "at %(listowner)s for review." msgstr "" "Twoja prośba o zapisanie się została przekazana opiekunowi listy \n" " %(listowner)s i czeka na jego zgodę." #: Mailman/Commands/cmd_subscribe.py:147 msgid "Subscription request succeeded." msgstr "Prośba o prenumeratę potwierdzona." #: Mailman/Commands/cmd_unsubscribe.py:17 msgid "" "\n" " unsubscribe [password] [address=
    ]\n" " Unsubscribe from the mailing list. If given, your password must " "match\n" " your current password. If omitted, a confirmation email will be " "sent\n" " to the unsubscribing address. If you wish to unsubscribe an address\n" " other than the address you sent this request from, you may specify\n" " `address=
    ' (no brackets around the email address, and no\n" " quotes!)\n" msgstr "" "\n" " unsubscribe [hasło] [address=]\n" " Wypisanie się z listy. Jeśli podano hasło, musi\n" " się ono zgadzać z aktualnych hasłem subskrybenta. Jeśli hasła\n" " nie podano, wysłana zostanie prośba o potwierdzenie. \n" " Podając argument 'address=', można wypisać się z\n" " innego adresu niż ten w polu nadawcy. \n" #: Mailman/Commands/cmd_unsubscribe.py:62 msgid "%(address)s is not a member of the %(listname)s mailing list" msgstr "%(address)s nie jest zapisany na listę %(listname)s" #: Mailman/Commands/cmd_unsubscribe.py:69 msgid "" "Your unsubscription request has been forwarded to the list administrator " "for\n" "approval." msgstr "" "Twoja prośba o wypisanie się została przekazana opiekunowi listy i \n" "czeka na jego zgodę." #: Mailman/Commands/cmd_unsubscribe.py:84 msgid "You gave the wrong password" msgstr "Zostało podane błędne hasło" #: Mailman/Commands/cmd_unsubscribe.py:87 msgid "Unsubscription request succeeded." msgstr "Prośba o wypisanie zrealizowana." #: Mailman/Commands/cmd_who.py:27 msgid "" "\n" " who\n" " See the non-hidden members of this mailing list.\n" " who password\n" " See everyone who is on this mailing list. The password is the\n" " list's admin or moderator password.\n" msgstr "" #: Mailman/Commands/cmd_who.py:35 #, fuzzy msgid "" "\n" " who password [address=
    ]\n" " See the non-hidden members of this mailing list. The roster is\n" " limited to list members only, and you must supply your membership\n" " password to retrieve it. If you're posting from an address other\n" " than your membership address, specify your membership address with\n" " `address=
    ' (no brackets around the email address, and no\n" " quotes!). If you provide the list's admin or moderator password,\n" " hidden members will be included.\n" msgstr "" "\n" " who password [address=]\n" " Zobacz listę osób zapisanych. Operacja dozwolona tylko dla \n" " subskrybentów listy, po podaniu prawidłowego hasła. \n" " Jeżeli wysyłasz komendę z innego adresu niż ten, z którego \n" " jesteś zapisany, podaj swój adres za pomocą parametru \n" " `address=' (adres bez nawiasów i cudzysłowów)\n" #: Mailman/Commands/cmd_who.py:46 msgid "" "\n" " who password\n" " See everyone who is on this mailing list. The roster is limited to\n" " list administrators and moderators only; you must supply the list\n" " admin or moderator password to retrieve the roster.\n" msgstr "" "\n" " who hasło\n" " Zobacz listę osób zapisanych. Operacja dozwolona tylko dla\n" " opiekunów i moderatorów listy, po podaniu \n" " prawidłowego hasła.\n" #: Mailman/Commands/cmd_who.py:128 msgid "You are not allowed to retrieve the list membership." msgstr "Nie masz uprawnień do wyświetlenia listy prenumeratorów." #: Mailman/Commands/cmd_who.py:134 msgid "This list has no members." msgstr "Nikt nie jest zapisany na tę listę." #: Mailman/Commands/cmd_who.py:148 msgid "Non-digest (regular) members:" msgstr "Prenumeratorzy (tryb wiadomości):" #: Mailman/Commands/cmd_who.py:151 msgid "Digest members:" msgstr "Prenumeratorzy (tryb paczek):" #: Mailman/Defaults.py:1578 msgid "Arabic" msgstr "arabski" #: Mailman/Defaults.py:1579 #, fuzzy msgid "Asturian" msgstr "estoński" #: Mailman/Defaults.py:1580 msgid "Catalan" msgstr "kataloński" #: Mailman/Defaults.py:1581 msgid "Czech" msgstr "czeski" #: Mailman/Defaults.py:1582 msgid "Danish" msgstr "duński" #: Mailman/Defaults.py:1583 msgid "German" msgstr "niemiecki" #: Mailman/Defaults.py:1584 msgid "English (USA)" msgstr "angielski (USA)" #: Mailman/Defaults.py:1585 msgid "Spanish (Spain)" msgstr "hiszpański (Hiszpania)" #: Mailman/Defaults.py:1586 msgid "Estonian" msgstr "estoński" #: Mailman/Defaults.py:1587 msgid "Euskara" msgstr "baskijski" #: Mailman/Defaults.py:1588 msgid "Persian" msgstr "" #: Mailman/Defaults.py:1589 msgid "Finnish" msgstr "fiński" #: Mailman/Defaults.py:1590 msgid "French" msgstr "francuski" #: Mailman/Defaults.py:1591 #, fuzzy msgid "Galician" msgstr "włoski" #: Mailman/Defaults.py:1592 msgid "Greek" msgstr "" #: Mailman/Defaults.py:1593 msgid "Hebrew" msgstr "hebrajski" #: Mailman/Defaults.py:1594 msgid "Croatian" msgstr "chorwacki" #: Mailman/Defaults.py:1595 msgid "Hungarian" msgstr "węgierski" #: Mailman/Defaults.py:1596 msgid "Interlingua" msgstr "" #: Mailman/Defaults.py:1597 msgid "Italian" msgstr "włoski" #: Mailman/Defaults.py:1598 msgid "Japanese" msgstr "japoński" #: Mailman/Defaults.py:1599 msgid "Korean" msgstr "koreański" #: Mailman/Defaults.py:1600 msgid "Lithuanian" msgstr "litewski" #: Mailman/Defaults.py:1601 msgid "Dutch" msgstr "duński" #: Mailman/Defaults.py:1602 msgid "Norwegian" msgstr "norweski" #: Mailman/Defaults.py:1603 msgid "Polish" msgstr "polski" #: Mailman/Defaults.py:1604 msgid "Portuguese" msgstr "portugalski" #: Mailman/Defaults.py:1605 msgid "Portuguese (Brazil)" msgstr "portugalski (Brazylia)" #: Mailman/Defaults.py:1606 msgid "Romanian" msgstr "rumuński" #: Mailman/Defaults.py:1607 msgid "Russian" msgstr "rosyjski" #: Mailman/Defaults.py:1608 #, fuzzy msgid "Slovak" msgstr "słowacki" #: Mailman/Defaults.py:1609 msgid "Slovenian" msgstr "słoweński" #: Mailman/Defaults.py:1610 msgid "Serbian" msgstr "serbski" #: Mailman/Defaults.py:1611 msgid "Swedish" msgstr "szwedzki" #: Mailman/Defaults.py:1612 msgid "Turkish" msgstr "turecki" #: Mailman/Defaults.py:1613 msgid "Ukrainian" msgstr "ukraiński" #: Mailman/Defaults.py:1614 msgid "Vietnamese" msgstr "wietnamski" #: Mailman/Defaults.py:1615 msgid "Chinese (China)" msgstr "chiński (Chiny)" #: Mailman/Defaults.py:1616 msgid "Chinese (Taiwan)" msgstr "chiński (Tajwan)" #: Mailman/Deliverer.py:51 msgid "" "Note: Since this is a list of mailing lists, administrative\n" "notices like the password reminder will be sent to\n" "your membership administrative address, %(addr)s." msgstr "" "Uwaga: Ponieważ jest to lista list, informacje\n" "administracyjne jak np. przypomnienia haseł będą wysyłane\n" "na Twój adres administracyjny - %(addr)s." #: Mailman/Deliverer.py:71 msgid " (Digest mode)" msgstr " (Tryb paczek)" #: Mailman/Deliverer.py:77 msgid "Welcome to the \"%(realname)s\" mailing list%(digmode)s" msgstr "Witaj na liście \"%(realname)s\" %(digmode)s" #: Mailman/Deliverer.py:87 msgid "You have been unsubscribed from the %(realname)s mailing list" msgstr "Zostałeś wypisany z listy \"%(realname)s\"" #: Mailman/Deliverer.py:114 msgid "%(listfullname)s mailing list reminder" msgstr "Przypomnienie o liście %(listfullname)s" #: Mailman/Deliverer.py:142 msgid "No reason given" msgstr "Nie podano powodu" #: Mailman/Deliverer.py:166 Mailman/Deliverer.py:185 msgid "Hostile subscription attempt detected" msgstr "Nieautoryzowana próba prenumeraty" #: Mailman/Deliverer.py:167 msgid "" "%(address)s was invited to a different mailing\n" "list, but in a deliberate malicious attempt they tried to confirm the\n" "invitation to your list. We just thought you'd like to know. No further\n" "action by you is required." msgstr "" "Osoba używająca adresu %(address)s została zaproszona na inną listę, \n" "a próbowała użyć swojego zaproszenia, żeby zapisać się na tę listę.\n" "To jest tylko powiadomienie o podejrzanym wydarzeniu, nie musisz nic \n" "więcej robić." #: Mailman/Deliverer.py:186 msgid "" "You invited %(address)s to your list, but in a\n" "deliberate malicious attempt, they tried to confirm the invitation to a\n" "different list. We just thought you'd like to know. No further action by " "you\n" "is required." msgstr "" "Zaprosiłeś osobę używającą adresu %(address)s na swoją listę, a ona \n" "próbowała użyć tego zaproszenia, żeby dostać się na inną listę. \n" "To jest tylko powiadomienie o podejrzanym wydarzeniu, nie musisz nic \n" "więcej robić." #: Mailman/Deliverer.py:219 msgid "%(listname)s mailing list probe message" msgstr "Test listy %(listname)s" #: Mailman/Errors.py:122 msgid "For some unknown reason" msgstr "Z nieznanego powodu" #: Mailman/Errors.py:128 Mailman/Errors.py:151 msgid "Your message was rejected" msgstr "Twój list został odrzucony" #: Mailman/Gui/Archive.py:25 msgid "Archiving Options" msgstr "Opcje archiwizacji" #: Mailman/Gui/Archive.py:31 msgid "List traffic archival policies." msgstr "Reguły archiwizacji." #: Mailman/Gui/Archive.py:34 msgid "Archive messages?" msgstr "Archiwizować wiadomości?" #: Mailman/Gui/Archive.py:36 msgid "private" msgstr "prywatne" #: Mailman/Gui/Archive.py:36 msgid "public" msgstr "publiczne" #: Mailman/Gui/Archive.py:37 msgid "Is archive file source for public or private archival?" msgstr "" "Czy plik archiwum jest źródłem dla archiwum publicznego czy prywatnego?" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Monthly" msgstr "Miesięcznie" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Quarterly" msgstr "Kwartalnie" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Yearly" msgstr "Rocznie" #: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79 msgid "Daily" msgstr "Dziennie" #: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79 msgid "Weekly" msgstr "Tygodniowo" #: Mailman/Gui/Archive.py:43 msgid "How often should a new archive volume be started?" msgstr "Jak często tworzyć nowe archiwum?" #: Mailman/Gui/Autoresponse.py:31 msgid "Auto-responder" msgstr "Auto-responder" #: Mailman/Gui/Autoresponse.py:39 msgid "" "Auto-responder characteristics.

    \n" "\n" "In the text fields below, string interpolation is performed with\n" "the following key/value substitutions:\n" "

      \n" "
    • listname - gets the name of the mailing list\n" "
    • listurl - gets the list's listinfo URL\n" "
    • requestemail - gets the list's -request address\n" "
    • owneremail - gets the list's -owner address\n" "
    \n" "\n" "

    For each text field, you can either enter the text directly into the " "text\n" "box, or you can specify a file on your local system to upload as the text." msgstr "" "Charakterystyka auto-respondera.

    \n" "\n" "W poniższych polach tekstowych, dokonywane jest podstawianie następujących " "par klucz/wartość:\n" "

      \n" "
    • listname - zawiera nazwę listy\n" "
    • listurl - zawiera adres URL strony informacyjnej listy\n" "
    • requestemail - zawiera adres do wysyłania żądań (-" "request) listy\n" "
    • owneremail - zawiera adres administratora listy (-owner)\n" "
    \n" "\n" "

    Dla każdego pola tekstowego, możesz wprowadzić tekst wprost do\n" "odpowiedniego pola, albo wskazać plik na dysku." #: Mailman/Gui/Autoresponse.py:55 msgid "" "Should Mailman send an auto-response to mailing list\n" " posters?" msgstr "" "Czy Mailman ma wysyłać auto-odpowiedzi do osób piszących na\n" " listę?" #: Mailman/Gui/Autoresponse.py:60 msgid "Auto-response text to send to mailing list posters." msgstr "Tekst auto-odpowiedzi dla osób piszących na listę." #: Mailman/Gui/Autoresponse.py:63 msgid "" "Should Mailman send an auto-response to emails sent to the\n" " -owner address?" msgstr "" "Czy Mailman ma wysyłać auto-odpowiedź na wiadomości wysyłane\n" " na adres -owner?" #: Mailman/Gui/Autoresponse.py:68 msgid "Auto-response text to send to -owner emails." msgstr "Tekst auto-odpowiedzi na wiadomości wysyłane na adres -owner." #: Mailman/Gui/Autoresponse.py:71 msgid "Yes, w/discard" msgstr "Tak, z usunięciem" #: Mailman/Gui/Autoresponse.py:71 msgid "Yes, w/forward" msgstr "Tak, z przetwarzaniem" #: Mailman/Gui/Autoresponse.py:72 msgid "" "Should Mailman send an auto-response to emails sent to the\n" " -request address? If you choose yes, decide whether you want\n" " Mailman to discard the original email, or forward it on to the\n" " system as a normal mail command." msgstr "" "Czy Mailman ma wysyłać auto-odpowiedź na listy kierowane na adres\n" " -request? Jeśli włączysz tę opcję, wybierz czy Mailman\n" " ma usuwać oryginalną wiadomość, czy też przetwarzać go\n" " jak zwykłą komendę emailową." #: Mailman/Gui/Autoresponse.py:79 msgid "Auto-response text to send to -request emails." msgstr "Tekst auto-odpowiedzi na wiadomości wysyłane na adres -request." #: Mailman/Gui/Autoresponse.py:82 msgid "" "Number of days between auto-responses to either the mailing\n" " list or -request/-owner address from the same poster. Set to\n" " zero (or negative) for no grace period (i.e. auto-respond to\n" " every message)." msgstr "" "Minimalna liczba dni pomiędzy auto-odpowiedziami z listy\n" " lub z adresów -request/-owner wysyłanymi do tego samego " "użytkownika.\n" " Ustaw zero (lub liczbę ujemną) aby wyłączyć tę opcję (tzn.\n" " auto-odpowiedzi wysyłane na każdy list)." #: Mailman/Gui/Bounce.py:26 msgid "Bounce processing" msgstr "Przetwarzanie zwrotów" #: Mailman/Gui/Bounce.py:32 msgid "" "These policies control the automatic bounce processing system\n" " in Mailman. Here's an overview of how it works.\n" "\n" "

    When a bounce is received, Mailman tries to extract two " "pieces\n" " of information from the message: the address of the member the\n" " message was intended for, and the severity of the problem " "causing\n" " the bounce. The severity can be either hard or\n" " soft meaning either a fatal error occurred, or a\n" " transient error occurred. When in doubt, a hard severity is " "used.\n" "\n" "

    If no member address can be extracted from the bounce, then " "the\n" " bounce is usually discarded. Otherwise, each member is assigned " "a\n" " bounce score and every time we encounter a bounce from\n" " this member we increment the score. Hard bounces increment by " "1\n" " while soft bounces increment by 0.5. We only increment the " "bounce\n" " score once per day, so even if we receive ten hard bounces from " "a\n" " member per day, their score will increase by only 1 for that " "day.\n" "\n" "

    When a member's bounce score is greater than the\n" " bounce score\n" " threshold, the subscription is disabled. Once disabled, " "the\n" " member will not receive any postings from the list until their\n" " membership is explicitly re-enabled (either by the list\n" " administrator or the user). However, they will receive " "occasional\n" " reminders that their membership has been disabled, and these\n" " reminders will include information about how to re-enable their\n" " membership.\n" "\n" "

    You can control both the\n" " number\n" " of reminders the member will receive and the\n" " frequency with which these reminders are sent.\n" "\n" "

    There is one other important configuration variable; after a\n" " certain period of time -- during which no bounces from the " "member\n" " are received -- the bounce information is\n" " considered\n" " stale and discarded. Thus by adjusting this value, and the\n" " score threshold, you can control how quickly bouncing members " "are\n" " disabled. You should tune both of these to the frequency and\n" " traffic volume of your list." msgstr "" #: Mailman/Gui/Bounce.py:75 msgid "Bounce detection sensitivity" msgstr "Ustawienia wykrywania zwrotów" #: Mailman/Gui/Bounce.py:78 msgid "Should Mailman perform automatic bounce processing?" msgstr "Czy Mailman ma dokonywać automatycznej analizy zwrotów?" #: Mailman/Gui/Bounce.py:79 msgid "" "By setting this value to No, you disable all\n" " automatic bounce processing for this list, however bounce\n" " messages will still be discarded so that the list " "administrator\n" " isn't inundated with them." msgstr "" "Ustawienie tego parametru na Nie spowoduje wyłączenie\n" "automatycznego przetwarzania zwrotów. Wszystkie zwroty będą \n" "ignorowane, a więc nie zapchają skrzynki administratora listy." #: Mailman/Gui/Bounce.py:85 msgid "" "The maximum member bounce score before the member's\n" " subscription is disabled. This value can be a floating point\n" " number." msgstr "" "Maksymalna punktacja, powyżej której subskrypcja zostaje zablokowana. " "Wartość ta jest liczbą rzeczywistą." #: Mailman/Gui/Bounce.py:88 msgid "" "Each subscriber is assigned a bounce score, as a floating\n" " point number. Whenever Mailman receives a bounce from a list\n" " member, that member's score is incremented. Hard bounces " "(fatal\n" " errors) increase the score by 1, while soft bounces (temporary\n" " errors) increase the score by 0.5. Only one bounce per day\n" " counts against a member's score, so even if 10 bounces are\n" " received for a member on the same day, their score will " "increase\n" " by just 1.\n" "\n" " This variable describes the upper limit for a member's bounce\n" " score, above which they are automatically disabled, but not\n" " removed from the mailing list." msgstr "" "Każdy z subskrybentów ma przypisany współczynnik zwrotów \n" "(liczba rzeczywista). Zwrot z danego adresu oznacza zwiększenie \n" "tego współczynnika. Błąd poważny powoduje zwiększenie wartości o 1.0, \n" "błąd tymczasowy zwiększa ją o 0.5. Tylko jeden zwrot z adresu na dzień \n" "jest liczony, a więc np. 10 błędów o nieistniejącym adresie dziennie " "zwiększy współczynnik \n" "tylko o 1.0. \n" "\n" "Wartość tej zmiennej określa górny limit współczynnika zwrotów. Po jego \n" "przekroczeniu prenumerata zostanie automatyczne zablokowana (co nie jest \n" "jednoznaczne z jej skasowaniem)." #: Mailman/Gui/Bounce.py:102 msgid "" "The number of days after which a member's bounce information\n" " is discarded, if no new bounces have been received in the\n" " interim. This value must be an integer." msgstr "" "Ilość dni, po której licznik zwrotów jest kasowany, w przypadku braku\n" "kolejnych. Wartość ta jest liczbą całkowitą." #: Mailman/Gui/Bounce.py:107 msgid "" "How many Your Membership Is Disabled warnings a\n" " disabled member should get before their address is removed " "from\n" " the mailing list. Set to 0 to immediately remove an address " "from\n" " the list once their bounce score exceeds the threshold. This\n" " value must be an integer." msgstr "" "Ile ostrzeżeń typu Twoja subskrypcja jest zablokowana ma zostać " "wysłanych przed usunięciem adresu z listy. Zero (0) oznacza, że adres " "zostanie usunięty natychmiast po przekroczeniu ustalonego poziomu zwrotów. " "Wartość ta jest liczbą całkowitą." #: Mailman/Gui/Bounce.py:114 msgid "" "The number of days between sending the Your Membership\n" " Is Disabled warnings. This value must be an integer." msgstr "" "Ilośc dni pomiędzy wysyłaniem kolejnych ostrzeżeń typu Twoja subskrypcja " "jest zablokowana. Wartość ta musi być liczbą całkowitą." #: Mailman/Gui/Bounce.py:117 Mailman/Gui/General.py:332 msgid "Notifications" msgstr "Powiadomienia" #: Mailman/Gui/Bounce.py:121 msgid "" "Should Mailman send you, the list owner, any bounce messages\n" " that failed to be detected by the bounce processor? Yes\n" " is recommended." msgstr "" "Czy Mailman powinien wysyłać opiekunowi listy powiadomienia o " "nierozpoznanych zwrotach? Odpowiedź Tak jest zalecana." #: Mailman/Gui/Bounce.py:124 msgid "" "While Mailman's bounce detector is fairly robust, it's\n" " impossible to detect every bounce format in the world. You\n" " should keep this variable set to Yes for two reasons: " "1)\n" " If this really is a permanent bounce from one of your members,\n" " you should probably manually remove them from your list, and " "2)\n" " you might want to send the message on to the Mailman " "developers\n" " so that this new format can be added to its known set.\n" "\n" "

    If you really can't be bothered, then set this variable to\n" " No and all non-detected bounces will be discarded\n" " without further processing.\n" "\n" "

    Note: This setting will also affect all messages " "sent\n" " to your list's -admin address. This address is deprecated and\n" " should never be used, but some people may still send mail to " "this\n" " address. If this happens, and this variable is set to\n" " No those messages too will get discarded. You may " "want\n" " to set up an\n" " autoresponse\n" " message for email to the -owner and -admin address." msgstr "" "Automatyczne rozpoznawanie zwrotów jest trudnym zadaniem. Mailman " "skutecznie \n" "rozpoznaje zdecydowaną większość wiadomości, jednak nie jest możliwe " "przewidzenie \n" "wszystkich możliwych formatów zwrotów. Zalecamy ustawienie tej zmiennej " "na \n" "Tak z dwóch powodów:1)\n" " W przypadku wielu, uciążliwych i nierozpoznanych automatycznie zwrotów z " "jednego \n" " z adresów - należy go ręcznie usunąć,\n" "2)\n" "...nierozpoznany zwrot możesz wysłać do twórców Mailmana - w ten sposób " "zostanie on \n" "dodany do znanych formatów i w przyszłości będzie rozpoznawany " "automatycznie.\n" "

    Jeśli chcesz całkowicie zignorować wszystkie zwroty, ustaw wartość tej " "zmiennej na \n" "Nie. \n" "

    Uwaga: Ta opcja wpływa na wiadomości wysyłane na adresy z \n" "końcówką -admin. Teoretycznie adres ten nie jest używany, ale \n" "niektórzy użytkownicy mogą wysyłać na niego wiadomości. W takiej \n" "sytuacji ustawienie tej opcji na Nie, spowoduje ich zignorowanie. " "Można ustawić " "automatyczną odpowiedź dla adresów -owner i -admin" #: Mailman/Gui/Bounce.py:147 msgid "" "Should Mailman notify you, the list owner, when bounces\n" " cause a member's subscription to be disabled?" msgstr "" "Czy Mailman ma powiadamiać opiekuna listy o zablokowaniu danej subskrypcji z " "powodu zwrotów?" #: Mailman/Gui/Bounce.py:149 msgid "" "By setting this value to No, you turn off\n" " notification messages that are normally sent to the list " "owners\n" " when a member's delivery is disabled due to excessive bounces.\n" " An attempt to notify the member will always be made." msgstr "" "Wybór opcji Nie spowoduje, że opiekun listy \n" "nie będzie otrzymywał powiadomień o zablokowanych prenumeratach \n" "z powodu zbyt wielu zwrotów.\n" "Mailman zawsze próbuje poinformować danego prenumeratora o problemie z " "dostarczeniem wiadomości." #: Mailman/Gui/Bounce.py:156 msgid "" "Should Mailman notify you, the list owner, when bounces\n" " cause a member to be unsubscribed?" msgstr "" "Czy Mailman ma powiadamiać opiekuna listy o wypisaniu prenumeratorów z " "powodu zwrotów?" #: Mailman/Gui/Bounce.py:158 msgid "" "By setting this value to No, you turn off\n" " notification messages that are normally sent to the list " "owners\n" " when a member is unsubscribed due to excessive bounces. An\n" " attempt to notify the member will always be made." msgstr "" "Wybór opcji Nie spowoduje, że opiekun listy \n" "nie będzie otrzymywał powiadomień o skasowanych adresach z \n" "z powodu zbyt wielu zwrotów.\n" "Mailman zawsze próbuje poinformować danego prenumeratora o problemie z " "dostarczeniem wiadomości" #: Mailman/Gui/Bounce.py:185 msgid "" "Bad value for %(property)s: %(val)s" msgstr "" "Niepoprawna wartość dla %(property)s: %(val)s" #: Mailman/Gui/ContentFilter.py:30 msgid "Content filtering" msgstr "Filtrowanie treści" #: Mailman/Gui/ContentFilter.py:37 msgid "Forward to List Owner" msgstr "Przekaż opiekunowi listy" #: Mailman/Gui/ContentFilter.py:39 msgid "Preserve" msgstr "Zachowaj" #: Mailman/Gui/ContentFilter.py:42 #, fuzzy msgid "" "Policies concerning the content of list traffic.\n" "\n" "

    Content filtering works like this: when a message is\n" " received by the list and you have enabled content filtering, " "the\n" " individual attachments are first compared to the\n" " filter\n" " types. If the attachment type matches an entry in the " "filter\n" " types, it is discarded.\n" "\n" "

    Then, if there are pass types\n" " defined, any attachment type that does not match a\n" " pass type is also discarded. If there are no pass types " "defined,\n" " this check is skipped.\n" "\n" "

    After this initial filtering, any multipart\n" " attachments that are empty are removed. If the outer message " "is\n" " left empty after this filtering, then the whole message is\n" " discarded.\n" "\n" "

    Then, each multipart/alternative section will\n" " be replaced by just the first alternative that is non-empty " "after\n" " filtering if\n" " collapse_alternatives is enabled.\n" "\n" "

    Finally, any text/html parts that are left in the\n" " message may be converted to text/plain if\n" " convert_html_to_plaintext is enabled and the site is\n" " configured to allow these conversions." msgstr "" "Reguły dotyczące automatycznego filtrowania formy (załączników) wiadomości.\n" "

    Filtrowanie formy przebiega w następujący sposób: jeśli nowa wiadomość \n" "przyjdzie na adres listy i włączona jest opcja filtrowania treści, każdy z " "załączników \n" "porównywany jest z \n" " listą zabronionych " "rozszerzeń plików.\n" ". Jeżeli załącznik pasuje do jakiegokolwiek pozycji z tej listy, " "zostaje \n" "usunięty.\n" "

    Następnie kasowane są załączniki nie pasujące do żadnej z " "pozycji na \n" "liście dozwolonych " "rozszerzeń.\n" "Pusta lista dozwolonych rozszerzeń powoduje pominięcie tego etapu " "filtrowania.\n" "

    Po wstępnym filtrowaniu, puste załączniki typu multipart\n" "są usuwane. Jeżeli po filtrowaniu cała wiadomość stanie się pusta, " "zostanie \n" "usunięta. Potem każda z grup załączników typu multipart/alternative " "jest \n" "zastępowana przez pierwszy niepusty element pozostały po filtrowaniu \n" "

    Na koniec, jeśli włączona jest opcja \n" "\n" "convert_html_to_plaintext i serwer zezwala na taką konwersję, \n" "każdy z pozostałych załączników typu text/html zostanie \n" "skonwertowany na text/plain." #: Mailman/Gui/ContentFilter.py:75 msgid "" "Should Mailman filter the content of list traffic according\n" " to the settings below?" msgstr "Czy chcesz włączyć filtrowanie treści wiadomości?" #: Mailman/Gui/ContentFilter.py:79 msgid "" "Remove message attachments that have a matching content\n" " type." msgstr "Usuń automatycznie załączniki następujących typów." #: Mailman/Gui/ContentFilter.py:82 msgid "" "Use this option to remove each message attachment that\n" " matches one of these content types. Each line should contain " "a\n" " string naming a MIME type/subtype,\n" " e.g. image/gif. Leave off the subtype to remove all\n" " parts with a matching major content type, e.g. image.\n" "\n" "

    Blank lines are ignored.\n" "\n" "

    See also pass_mime_types for a content type whitelist." msgstr "" "Opcja ta pozwala na usunięcie załączników określonego typu.\n" " Każda z linii powinna zawierać nazwę typu MIME \n" " typ/podtyp, np. image/gif. Można podać tylko typ główny,\n" " co będzie oznaczało usunięcie wszystkich załączników tego rodzaju, \n" " np. image.\n" "

    Puste linie są ignorowane.

    Zobacz również opcję \n" "\n" " pass_mime_types umożliwiającą odwrotne filtrowanie." #: Mailman/Gui/ContentFilter.py:94 msgid "" "Remove message attachments that don't have a matching\n" " content type. Leave this field blank to skip this filter\n" " test." msgstr "" "Usuń załączniki, które nie pasują do następujących typów. Puste pole oznacza " "pominięcie tego etapu filtrowania." #: Mailman/Gui/ContentFilter.py:98 msgid "" "Use this option to remove each message attachment that does\n" " not have a matching content type. Requirements and formats " "are\n" " exactly like filter_mime_types.\n" "\n" "

    Note: if you add entries to this list but don't add\n" " multipart to this list, any messages with attachments\n" " will be rejected by the pass filter." msgstr "" "Opcja ta pozwala na usunięcie załączników innego typu niż wymienione.\n" "Wymagania i format danych jest taki sam jak w opcji filter_mime_types.\n" "

    Uwaga: Jeśli ustawisz jakikolwiek typ i nie dodasz linijki\n" "multipart, filtr usunie wszystkie wiadomość, która posiadają\n" "jakikolwiek załącznik." #: Mailman/Gui/ContentFilter.py:108 msgid "" "Remove message attachments that have a matching filename\n" " extension." msgstr "Automatycznie usuń załączniki następujących typów." #: Mailman/Gui/ContentFilter.py:112 msgid "" "Remove message attachments that don't have a matching\n" " filename extension. Leave this field blank to skip this " "filter\n" " test." msgstr "" "Usuń załączniki, które nie pasują do następujących typów. Puste pole oznacza " "pominięcie tego etapu filtrowania." #: Mailman/Gui/ContentFilter.py:117 #, fuzzy msgid "" "Should Mailman collapse multipart/alternative to its\n" " first part content?" msgstr "" "Czy Mailman ma wysyłać auto-odpowiedzi do osób wysyłających \n" " wiadomości na listę?" #: Mailman/Gui/ContentFilter.py:121 msgid "" "Should Mailman convert text/html parts to plain\n" " text? This conversion happens after MIME attachments have " "been\n" " stripped." msgstr "" "Czy Mailman ma automatycznie konwertować text/html do czystego\n" " tekstu? Konwersja przeprowadzana jest po usunięciu załączników MIME." #: Mailman/Gui/ContentFilter.py:127 msgid "" "Action to take when a message matches the content filtering\n" " rules." msgstr "Co zrobić, jeśli wiadomość została pusta po filtrowaniu formy?" #: Mailman/Gui/ContentFilter.py:130 msgid "" "One of these actions is taken when the message matches one of\n" " the content filtering rules, meaning, the top-level\n" " content type matches one of the filter_mime_types, or the top-level content type does\n" " not match one of the\n" " pass_mime_types, or if after filtering the subparts of " "the\n" " message, the message ends up empty.\n" "\n" "

    Note this action is not taken if after filtering the " "message\n" " still contains content. In that case the message is always\n" " forwarded on to the list membership.\n" "\n" "

    When messages are discarded, a log entry is written\n" " containing the Message-ID of the discarded message. When\n" " messages are rejected or forwarded to the list owner, a reason\n" " for the rejection is included in the bounce message to the\n" " original author. When messages are preserved, they are saved " "in\n" " a special queue directory on disk for the site administrator " "to\n" " view (and possibly rescue) but otherwise discarded. This last\n" " option is only available if enabled by the site\n" " administrator." msgstr "" "Jedno z tych działań zostanie wykonane, jeżeli wiadomość po procesie \n" "filtrowania treści będzie pozbawiona treści. \n" "Może się tak stać na każdym etapie filtrowania treści: \n" "zabronionych typów " "filter_mime_types \n" "jedynie dozwolonych typów pass_mime_types, albo przy końcowej redukcji załączników złożonych.\n" "

    To ustawienie nie dotyczy sytuacji, w której wiadomość po filtrowaniu\n" "wciąż będzie zawierała jakąkolwiek treść. Wtedy zostanie ona przekazana \n" "wszystkim członkom listy.\n" "

    Jeśli wiadomość zostanie zignorowana, w logu zapisany \n" "zostanie wpis z identyfikatorem zignorowanej wiadomości.\n" "Odrzucenie wiadomości, lub przekazanie jej do opiekuna listy spowoduje " "wysłanie \n" "powiadomienia do autora. Wiadomość może być \n" "również zachowana, wtedy jej treść zostanie zapisana w specjalnym katalogu \n" " na serwerze. Opiekun listy będzie mógł zdecydować później co z nią \n" "zrobić. Ostatnia opcja może nie być dostępna w zależności od konfiguracji\n" "serwera." #: Mailman/Gui/ContentFilter.py:171 msgid "Bad MIME type ignored: %(spectype)s" msgstr "Zignorowano błędny typ MIME: %(spectype)s" #: Mailman/Gui/Digest.py:36 msgid "Digest options" msgstr "Opcje trybu paczek" #: Mailman/Gui/Digest.py:44 msgid "Batched-delivery digest characteristics." msgstr "Charakterystyka grupowego wysyłania paczek." #: Mailman/Gui/Digest.py:47 msgid "Can list members choose to receive list traffic bunched in digests?" msgstr "" "Czy subskrybenci mogą wybrać opcję otrzymywania listów zgrupowanych w paczki?" #: Mailman/Gui/Digest.py:51 msgid "Digest" msgstr "Tryb paczek" #: Mailman/Gui/Digest.py:51 msgid "Regular" msgstr "Tryb wiadomości" #: Mailman/Gui/Digest.py:52 msgid "Which delivery mode is the default for new users?" msgstr "Który z trybów jest domyślny dla nowych użytkowników?" #: Mailman/Gui/Digest.py:55 msgid "MIME" msgstr "MIME" #: Mailman/Gui/Digest.py:55 msgid "Plain" msgstr "Czysty tekst" #: Mailman/Gui/Digest.py:56 msgid "When receiving digests, which format is default?" msgstr "Przy włączonym trybie paczek, który z formatów jest domyślny?" #: Mailman/Gui/Digest.py:59 #, fuzzy msgid "" "How big in Kb should a digest be before it gets sent out? 0 implies no " "maximum size." msgstr "Ile kilobajtów powinna mieć paczka zanim zostanie wysłana?" #: Mailman/Gui/Digest.py:63 msgid "" "Should a digest be dispatched daily when the size threshold isn't reached?" msgstr "" "Wysyłać paczkę codziennie, jeśli nie zostanie osiągnięta minimalna wielkość?" #: Mailman/Gui/Digest.py:67 msgid "Header added to every digest" msgstr "Nagłówek dodawany do każdej paczki" #: Mailman/Gui/Digest.py:68 msgid "" "Text attached (as an initial message, before the table of contents) to the " "top of digests. " msgstr "" "Tekst (informacja wstępna, przed spisem treści) wstawiany na początku " "paczki. " #: Mailman/Gui/Digest.py:73 msgid "Footer added to every digest" msgstr "Stopka dodawana do każdej paczki" #: Mailman/Gui/Digest.py:74 msgid "Text attached (as a final message) to the bottom of digests. " msgstr "Tekst (uwagi końcowe) wstawiany na końcu paczki. " #: Mailman/Gui/Digest.py:80 msgid "How often should a new digest volume be started?" msgstr "Jak często zaczynać nowy tom paczek?" #: Mailman/Gui/Digest.py:81 msgid "" "When a new digest volume is started, the volume number is\n" " incremented and the issue number is reset to 1." msgstr "" "Gdy tworzony jest nowy tom, numer tomu jest zwiększany,\n" " a numer paczki ustawiany na 1." #: Mailman/Gui/Digest.py:85 msgid "Should Mailman start a new digest volume?" msgstr "Czy Mailman ma rozpocząć nowy tom paczek?" #: Mailman/Gui/Digest.py:86 msgid "" "Setting this option instructs Mailman to start a new volume\n" " with the next digest sent out." msgstr "" "Włączenie tej opcji spowoduje, że Mailman rozpocznie segment\n" " przy wysyłaniu kolejnej paczki." #: Mailman/Gui/Digest.py:90 msgid "" "Should Mailman send the next digest right now, if it is not\n" " empty?" msgstr "" "Czy Mailman ma wysłać kolejną paczkę w tej chwili, jeśli nie\n" " byłaby one pusta?" #: Mailman/Gui/Digest.py:145 msgid "" "The next digest will be sent as volume\n" " %(volume)s, number %(number)s" msgstr "" "Następna paczka będzie wysłana jako tom \n" " %(volume)s, numer %(number)s" #: Mailman/Gui/Digest.py:150 msgid "A digest has been sent." msgstr "Paczka została wysłana." #: Mailman/Gui/Digest.py:152 msgid "There was no digest to send." msgstr "Brak skolejkowanych paczek do wysłania." #: Mailman/Gui/GUIBase.py:172 msgid "Invalid value for variable: %(property)s" msgstr "Niepoprawna wartość zmiennej: %(property)s" #: Mailman/Gui/GUIBase.py:176 msgid "Bad email address for option %(property)s: %(error)s" msgstr "Błędny adres email dla opcji %(property)s: %(error)s" #: Mailman/Gui/GUIBase.py:202 msgid "" "The following illegal substitution variables were\n" " found in the %(property)s string:\n" " %(bad)s\n" "

    Your list may not operate properly until you correct " "this\n" " problem." msgstr "" "Znaleziono błędy w podstawianiu zmiennych w ciągu:\n" "%(property)s: %(bad)s\n" "

    Lista może nie działać prawidłowo, jeśli nie rozwiążesz \n" " tego problemu." #: Mailman/Gui/GUIBase.py:216 msgid "" "Your %(property)s string appeared to\n" " have some correctable problems in its new value.\n" " The fixed value will be used instead. Please\n" " double check that this is what you intended.\n" " " msgstr "" "Ciąg znaków %(property)s zawiera błędy.\n" "Zostanie użyta stała wartość. Proszę ponownie sprawdzić, \n" "czy jest to zgodne z oczekiwaniami." #: Mailman/Gui/General.py:37 msgid "General Options" msgstr "Opcje ogólne" #: Mailman/Gui/General.py:51 msgid "Conceal the member's address" msgstr "Ukryj adres" #: Mailman/Gui/General.py:52 msgid "Acknowledge the member's posting" msgstr "Powiadamiaj o przyjętych postach" #: Mailman/Gui/General.py:53 msgid "Do not send a copy of a member's own post" msgstr "Nie wysyłaj kopii wiadomości do nadawcy" #: Mailman/Gui/General.py:55 msgid "Filter out duplicate messages to list members (if possible)" msgstr "Unikaj wysyłania duplikatów" #: Mailman/Gui/General.py:62 msgid "" "Fundamental list characteristics, including descriptive\n" " info and basic behaviors." msgstr "" "Podstawowa charakterystyka listy, m.in. szczegółowy opis\n" " i główne parametry." #: Mailman/Gui/General.py:65 msgid "General list personality" msgstr "Informacje o liście" #: Mailman/Gui/General.py:68 msgid "The public name of this list (make case-changes only)." msgstr "Publiczna nazwa listy (dokonaj jedynie zmiany wielkich/małych liter)." #: Mailman/Gui/General.py:69 msgid "" "The capitalization of this name can be changed to make it\n" " presentable in polite company as a proper noun, or to make an\n" " acronym part all upper case, etc. However, the name will be\n" " advertised as the email address (e.g., in subscribe " "confirmation\n" " notices), so it should not be otherwise altered. " "(Email\n" " addresses are not case sensitive, but they are sensitive to\n" " almost everything else :-)" msgstr "" "Pisownia wielkich/małych liter w tej nazwie może być zmieniona\n" "aby odpowiadała prawidłowemu rzeczownikowi, czy też skrótowi.\n" "Należy jednak pamiętać, że nazwa ta będzie prezentowana\n" "w adresie e-mail (np. w potwierdzeniach zapisania), a zatem\n" "nie powinna być istotnie zmieniana. (W adresach e-mail\n" "nie rozróżnia \n" "się wielkości liter. " #: Mailman/Gui/General.py:78 msgid "" "The list administrator email addresses. Multiple\n" " administrator addresses, each on separate line is okay." msgstr "" "Adres e-mail administratora listy. Można wprowadzić\n" "kilka adresów w osobnych wierszach." #: Mailman/Gui/General.py:81 msgid "" "There are two ownership roles associated with each mailing\n" " list. The list administrators are the people who " "have\n" " ultimate control over all parameters of this mailing list. " "They\n" " are able to change any list configuration variable available\n" " through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions;\n" " they are not able to change any list configuration variable, " "but\n" " they are allowed to tend to pending administration requests,\n" " including approving or rejecting held subscription requests, " "and\n" " disposing of held postings. Of course, the list\n" " administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into\n" " administrators and moderators, you must\n" " set a separate moderator password,\n" " and also provide the email\n" " addresses of the list moderators. Note that the field you\n" " are changing here specifies the list administrators." msgstr "" "Istnieją dwie różne role związane z każdą listą.\n" "Administratorzy mają\n" "pełną kontrolę nad wszystkimi parametrami danej listy. Mogą oni\n" "dokonać tego dzięki poniższym stronom administracyjnym.\n" "\n" "

    Moderatorzy mają bardziej ograniczone uprawnienia; nie mogą\n" "zmieniać parametrów listy, natomiast zarządzają skolejkowanymi\n" "zapytaniami użytkowników, np. zezwalając lub odrzucając prośby\n" "o zapisanie, czy też usuwając zatrzymane wiadomości. Oczywiście\n" "administratorzy listy mogą wykonywać te same czynności.\n" "\n" "

    Aby podzielić obowiązki związane z zarządzaniem listą między\n" "administratorów i moderatorów, musisz wpisać\n" "dodatkowe hasło dla moderatorów, a także wprowadzić ich\n" "adresy e-mail. Zauważ, że\n" "edytowane pole dotyczy administratorów." #: Mailman/Gui/General.py:102 msgid "" "The list moderator email addresses. Multiple\n" " moderator addresses, each on separate line is okay." msgstr "" "Adresy moderatorów. Można wprowadzić\n" "kilka adresów w osobnych wierszach." #: Mailman/Gui/General.py:105 msgid "" "There are two ownership roles associated with each mailing\n" " list. The list administrators are the people who " "have\n" " ultimate control over all parameters of this mailing list. " "They\n" " are able to change any list configuration variable available\n" " through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions;\n" " they are not able to change any list configuration variable, " "but\n" " they are allowed to tend to pending administration requests,\n" " including approving or rejecting held subscription requests, " "and\n" " disposing of held postings. Of course, the list\n" " administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into\n" " administrators and moderators, you must\n" " set a separate moderator password,\n" " and also provide the email addresses of the list moderators in\n" " this section. Note that the field you are changing here\n" " specifies the list moderators." msgstr "" "Istnieją dwie różne role związane z każdą listą.\n" "Administratorzy mają\n" "pełną kontrolę nad wszystkimi parametrami danej listy. Mogą oni\n" "dokonać tego dzięki poniższym stronom administracyjnym.\n" "\n" "

    Moderatorzy mają bardziej ograniczone uprawnienia; nie mogą\n" "zmieniać parametrów listy, natomiast zarządzają skolejkowanymi\n" "zapytaniami użytkowników, np. zezwalając lub odrzucając prośby\n" "o zapisanie, czy też usuwając zatrzymane wiadomości. Oczywiście\n" "administratorzy listy mogą wykonywać te same czynności.\n" "\n" "

    Aby podzielić obowiązki związane z zarządzaniem listą między\n" "administratorów i moderatorów, musisz wpisać\n" "dodatkowe hasło dla moderatorów, a także wprowadzić ich\n" "adresy e-mail. Zauważ, że\n" "edytowane pole dotyczy moderatorów." #: Mailman/Gui/General.py:126 msgid "A terse phrase identifying this list." msgstr "Zwięzły opis listy." #: Mailman/Gui/General.py:128 msgid "" "This description is used when the mailing list is listed with\n" " other mailing lists, or in headers, and so forth. It " "should\n" " be as succinct as you can get it, while still identifying " "what\n" " the list is." msgstr "" "Ten opis jest używany, gdy wyświetlana jest lista list dostępnych na " "serwerze,\n" "oraz w nagłówkach wiadomości. Opis powinien być zwięzły, ale zarazem dobrze\n" "identyfikujący tematykę listy." #: Mailman/Gui/General.py:134 msgid "" "An introductory description - a few paragraphs - about the\n" " list. It will be included, as html, at the top of the " "listinfo\n" " page. Carriage returns will end a paragraph - see the details\n" " for more info." msgstr "" "Wstępny opis listy. Będzie on załączony jako HTML\n" "w górnej części strony informacyjnej listy. Znaki nowego wiersza będą\n" "potraktowane jako zakończenia akapitów - więcej informacji na ten temat\n" "znajdziesz w pomocy." #: Mailman/Gui/General.py:138 msgid "" "The text will be treated as html except that\n" " newlines will be translated to <br> - so you can use " "links,\n" " preformatted text, etc, but don't put in carriage returns " "except\n" " where you mean to separate paragraphs. And review your changes " "-\n" " bad html (like some unterminated HTML constructs) can prevent\n" " display of the entire listinfo page." msgstr "" "Tekst będzie potraktowany jako fragment HTML, z wyjątkiem znaków\n" "nowego wiersza, które będą skonwertowane na <br> - możesz zatem\n" "używać odsyłaczy, tekstu preformatowanego itp., ale nie naciskaj Enter\n" "o ile nie chcesz rozpocząć nowego akapitu. Dokładnie sprawdź wprowadzone\n" "zmiany - błędny HTML (np. brak zamykających znaczników) może zablokować\n" "wyświetlanie całej strony informacyjnej." #: Mailman/Gui/General.py:146 msgid "Prefix for subject line of list postings." msgstr "Prefiks dodawany do tematu listów" #: Mailman/Gui/General.py:147 msgid "" "This text will be prepended to subject lines of messages\n" " posted to the list, to distinguish mailing list messages in\n" " mailbox summaries. Brevity is premium here, it's ok to " "shorten\n" " long mailing list names to something more concise, as long as " "it\n" " still identifies the mailing list.\n" " You can also add a sequential number by %%d substitution\n" " directive. eg.; [listname %%d] -> [listname 123]\n" " (listname %%05d) -> (listname 00123)\n" " " msgstr "" "Ten tekst zostanie wstawione przed tematem wiadomości wysyłanych na listę,\n" "aby wyróżnić je spośród innych wiadomości w skrzynce użytkownika.\n" "Zwięzłość jest tutaj konieczna, dłuższe nazwy list warto\n" "skrócić, o ile nadal identyfikują one listę.\n" "Można dodać numer kolejnego listu poprzez dyrektywę %%d \n" ",np. [Lista %%d] -> [Lista 123]\n" "(Lista %%05d) -> (Lista 00123)\n" " " #: Mailman/Gui/General.py:158 Mailman/Gui/Privacy.py:244 msgid "Munge From" msgstr "" #: Mailman/Gui/General.py:158 Mailman/Gui/Privacy.py:244 #, fuzzy msgid "Wrap Message" msgstr "Wiadomość oryginalna" #: Mailman/Gui/General.py:159 msgid "" "Replace the From: header address with the list's posting\n" " address to mitigate issues stemming from the original From:\n" " domain's DMARC or similar policies." msgstr "" #: Mailman/Gui/General.py:162 msgid "" "Several protocols now in wide use attempt to ensure that use\n" " of the domain in the author's address (ie, in the From: header\n" " field) is authorized by that domain. These protocols may be\n" " incompatible with common list features such as footers, " "causing\n" " participating email services to bounce list traffic merely\n" " because of the address in the From: field. This has " "resulted\n" " in members being unsubscribed despite being perfectly able to\n" " receive mail.\n" "

    \n" " The following actions are applied to all list messages when\n" " selected here. To apply these actions only to messages where " "the\n" " domain in the From: header is determined to use such a " "protocol,\n" " see the \n" " dmarc_moderation_action settings under Privacy options...\n" " -> Sender filters.\n" "

    Settings:

    \n" "

    \n" "
    No
    \n" "
    Do nothing special. This is appropriate for anonymous " "lists.\n" " It is appropriate for dedicated announcement lists, unless the\n" " From: address of authorized posters might be in a domain with " "a\n" " DMARC or similar policy. It is also appropriate if you choose " "to\n" " use dmarc_moderation_action other than Accept for this list.\n" "
    Munge From
    \n" "
    This action replaces the poster's address in the From: " "header\n" " with the list's posting address and adds the poster's address " "to\n" " the addresses in the original Reply-To: header.
    \n" "
    Wrap Message
    \n" "
    Just wrap the message in an outer message with the From:\n" " header containing the list's posting address and with the " "original\n" " From: address added to the addresses in the original Reply-To:\n" " header and with Content-Type: message/rfc822. This is " "effectively\n" " a one message MIME format digest.
    \n" "
    \n" "

    The transformations for anonymous_list are applied before\n" " any of these actions. It is not useful to apply actions other\n" " than No to an anonymous list, and if you do so, the result may\n" " be surprising.\n" "

    The Reply-To: header munging actions below interact with " "these\n" " actions as follows:\n" "

    first_strip_reply_to = Yes will remove all the incoming\n" " Reply-To: addresses but will still add the poster's address to\n" " Reply-To: for all three settings of reply_goes_to_list which\n" " respectively will result in just the poster's address, the\n" " poster's address and the list posting address or the poster's\n" " address and the explicit reply_to_address in the outgoing\n" " Reply-To: header. If first_strip_reply_to = No the poster's\n" " address in the original From: header, if not already included " "in\n" " the Reply-To:, will be added to any existing Reply-To:\n" " address(es).\n" "

    These actions, whether selected here or via \n" " dmarc_moderation_action, do not apply to messages in " "digests\n" " or archives or sent to usenet via the Mail<->News " "gateways.\n" "

    If \n" " dmarc_moderation_action applies to this message with an\n" " action other than Accept, that action rather than this is\n" " applied" msgstr "" #: Mailman/Gui/General.py:224 msgid "" "Hide the sender of a message, replacing it with the list\n" " address (Removes From, Sender and Reply-To fields)" msgstr "" "Ukrycie adresu nadawcy wiadomości. Jest on zastępowany \n" " adresem listy (operacja na polach From, Sender i \n" " Reply-To)" #: Mailman/Gui/General.py:227 msgid "Reply-To: header munging" msgstr "Nadpisywanie nagłówka Reply-To: (Odpowiedz-Do:)" #: Mailman/Gui/General.py:230 msgid "" "Should any existing Reply-To: header found in the\n" " original message be stripped? If so, this will be done\n" " regardless of whether an explict Reply-To: header is\n" " added by Mailman or not." msgstr "" "Czy usunąć pole nagłówka Reply-To z wiadomości? Jeśli tak, to " "będzie ono usunięte niezależnie od tego, czy zostało ustawione przez " "Mailmana, czy nie." #: Mailman/Gui/General.py:236 msgid "Explicit address" msgstr "Wybrany adres" #: Mailman/Gui/General.py:236 msgid "Poster" msgstr "Nadawca" #: Mailman/Gui/General.py:236 msgid "This list" msgstr "Ta lista" #: Mailman/Gui/General.py:237 msgid "" "Where are replies to list messages directed?\n" " Poster is strongly recommended for most " "mailing\n" " lists." msgstr "" "Dokąd powinny być kierowane odpowiedzi na wiadomości wysyłane na tę listę?\n" "Nadawca jest zalecany dla większości list." #: Mailman/Gui/General.py:242 #, fuzzy msgid "" "This option controls what Mailman does to the\n" " Reply-To: header in messages flowing through this\n" " mailing list. When set to Poster, no Reply-To:\n" " header is added by Mailman, although if one is present in the\n" " original message, it is not stripped. Setting this value to\n" " either This list or Explicit address causes\n" " Mailman to insert a specific Reply-To: header in all\n" " messages, overriding the header in the original message if\n" " necessary (Explicit address inserts the value of reply_to_address).\n" "\n" "

    There are many reasons not to introduce or override the\n" " Reply-To: header. One is that some posters depend on\n" " their own Reply-To: settings to convey their valid\n" " return address. Another is that modifying Reply-To:\n" " makes it much more difficult to send private replies. See `Reply-" "To'\n" " Munging Considered Harmful for a general discussion of " "this\n" " issue. See Reply-" "To\n" " Munging Considered Useful for a dissenting opinion.\n" "\n" "

    Some mailing lists have restricted posting privileges, with " "a\n" " parallel list devoted to discussions. Examples are `patches' " "or\n" " `checkin' lists, where software changes are posted by a " "revision\n" " control system, but discussion about the changes occurs on a\n" " developers mailing list. To support these types of mailing\n" " lists, select Explicit address and set the\n" " Reply-To: address below to point to the parallel\n" " list." msgstr "" "Ta opcja określa działanie Mailman'a odnośnie nagłówków Reply-To:\n" "(Odpowiedz-Do:) we wiadomościach przechodzących przez tę listę.\n" "Jeśli wybrano opcję Nadawca, Mailman nie dodaje,\n" "ani też nie zmienia istniejącego nagłówka Reply-To:.\n" "Ustawienie tej opcji na Ta lista lub Wybrany adres\n" "powoduje, że Mailman ustawia określony nagłówek Reply-To:\n" "we wszystkich wiadomościach, nadpisując oryginalną zawartość w razie\n" "konieczności (Wybrany adres wstawia zawartość pola\n" "reply_to_address).\n" "\n" "

    Istnieje wiele powodów, dla których nie należy wprowadzać lub zmieniać\n" "nagłówka Reply-To:. Jednym z nich jest fakt, że dla niektórych\n" "subskrybentów jest to\n" "jedyna możliwość wprowadzenia właściwego adresu zwrotnego.\n" "Innym powodem jest to, że zmodyfikowany nagłówek może utrudnić wysyłanie\n" "prywatnych odpowiedzi do nadawcy. Odwiedź stronę\n" "`Reply-To'\n" "Munging Considered Harmful aby przeczytać bardziej szczegółowe\n" "omówienie tego problemu. Z kolei w artykule\n" "Reply-" "To\n" "Munging Considered Useful przedstawiono przeciwny pogląd.\n" "\n" "

    Niektóre listy mają ograniczony przywilej wysyłania\n" "wiadomości, a właściwa dyskusja toczy się na równoległej\n" "liście do tego przeznaczonej. Dla przykładu są to listy z "poprawkami\n" "do programów" ("patches") lub z "informacjami o " "zmianach\n" "w projekcie" ("checkins"), na które wiadomości są wysyłane\n" "przez system kontroli wersji, a dyskusja o zmianach toczy się na liście\n" "programistów. Aby obsłużyć ten rodzaj listy, zaznacz\n" "Wybrany adres i ustaw nagłówek Reply-To: aby wskazywał\n" "równoległą listę." #: Mailman/Gui/General.py:274 msgid "Explicit Reply-To: header." msgstr "Wybrany adres w nagłówku Reply-To:." #: Mailman/Gui/General.py:276 #, fuzzy msgid "" "This is the address set in the Reply-To: header\n" " when the reply_goes_to_list\n" " option is set to Explicit address.\n" "\n" "

    There are many reasons not to introduce or override the\n" " Reply-To: header. One is that some posters depend on\n" " their own Reply-To: settings to convey their valid\n" " return address. Another is that modifying Reply-To:\n" " makes it much more difficult to send private replies. See `Reply-" "To'\n" " Munging Considered Harmful for a general discussion of " "this\n" " issue. See Reply-" "To\n" " Munging Considered Useful for a dissenting opinion.\n" "\n" "

    Some mailing lists have restricted posting privileges, with " "a\n" " parallel list devoted to discussions. Examples are `patches' " "or\n" " `checkin' lists, where software changes are posted by a " "revision\n" " control system, but discussion about the changes occurs on a\n" " developers mailing list. To support these types of mailing\n" " lists, specify the explicit Reply-To: address here. " "You\n" " must also specify Explicit address in the\n" " reply_goes_to_list\n" " variable.\n" "\n" "

    Note that if the original message contains a\n" " Reply-To: header, it will not be changed." msgstr "" "Jest to adres wprowadzany do nagłówka Reply-To:\n" "(Odpowiedz-Do:), gdy opcja\n" "reply_goes_to_list\n" "jest ustawiona na Wybrany adres.\n" "\n" "

    Istnieje wiele powodów, dla których nie należy wprowadzać lub zmieniać\n" "nagłówka Reply-To:. Jednym z nich jest fakt, że dla niektórych\n" "prenumeratorów jest to\n" "jedyna możliwość wprowadzenia właściwego adresu zwrotnego.\n" "Innym powodem jest to, że zmodyfikowany nagłówek może utrudnić wysyłanie\n" "prywatnych odpowiedzi do nadawcy. Odwiedź stronę\n" "`Reply-To'\n" "Munging Considered Harmful aby przeczytać bardziej szczegółowe\n" "omówienie tego problemu. Z kolei w artykule\n" "Reply-" "To\n" "Munging Considered Useful przedstawiono przeciwny pogląd.\n" "\n" "

    Niektóre listy mają ograniczony przywilej wysyłania\n" "wysyłania wiadomości, a właściwa dyskusja toczy się na równoległej\n" "liście do tego przeznaczonej. Dla przykładu są to listy z "poprawkami\n" "do programów" ("patches") lub z "informacjami o " "zmianach\n" "w projekcie" ("checkins"), na które wiadomości są wysyłane\n" "przez system kontroli wersji, a dyskusja o zmianach toczy się na liście\n" "programistów. Aby obsłużyć ten rodzaj listy, wprowadź\n" "w tym polu zawartość nagłówka Reply-To:.\n" "Musisz też zaznaczyć Wybrany adres we wcześniejszej opcji\n" "\n" "

    Zauważ, że jeśli oryginalna wiadomość zawiera nagłówek\n" "Reply-To:, to nie zostanie on zmodyfikowany." #: Mailman/Gui/General.py:305 msgid "Umbrella list settings" msgstr "Ustawienia listy parasolowej" #: Mailman/Gui/General.py:308 msgid "" "Send password reminders to, eg, \"-owner\" address instead of\n" " directly to user." msgstr "" "Wysyłać przypomnienia haseł na np. adres z przyrostkiem "-owner"\n" "zamiast bezpośrednio do użytkownika." #: Mailman/Gui/General.py:311 msgid "" "Set this to yes when this list is intended to cascade only\n" " to other mailing lists. When set, meta notices like\n" " confirmations and password reminders will be directed to an\n" " address derived from the member's address - it will have the\n" " value of \"umbrella_member_suffix\" appended to the member's\n" " account name." msgstr "" "Ustaw tę opcję, jeśli ta lista jest listą parasolową dla innych list.\n" "Gdy jest ona uaktywniona, meta-informacje, jak np. potwierdzenia\n" "i przypomnienia haseł będą wysyłane na adres wyznaczony na podstawie\n" "adresu subskrybenta - zawartość pola z przyrostkiem zostanie dołączona\n" "do nazwy użytkownika." #: Mailman/Gui/General.py:319 msgid "" "Suffix for use when this list is an umbrella for other\n" " lists, according to setting of previous \"umbrella_list\"\n" " setting." msgstr "" "Przyrostek używany, jeśli ta lista jest listą parasolową, \n" "(patrz poprzednia opcja)." #: Mailman/Gui/General.py:323 msgid "" "When \"umbrella_list\" is set to indicate that this list has\n" " other mailing lists as members, then administrative notices " "like\n" " confirmations and password reminders need to not be sent to " "the\n" " member list addresses, but rather to the owner of those member\n" " lists. In that case, the value of this setting is appended to\n" " the member's account name for such notices. `-owner' is the\n" " typical choice. This setting has no effect when \"umbrella_list" "\"\n" " is \"No\"." msgstr "" "Gdy opcja dotycząca listy parasolowej jest ustawiona (subskrybentami są " "inne\n" "listy), informacje administracyjne,\n" "jak potwierdzenia i przypomnienia haseł nie powinny być wysyłane na adresy\n" "prenumeratorów, a do administratorów tych list zależnych. W takim wypadku\n" "zawartość tego pola będzie dołączana do nazwy użytkownika.\n" ""-owner" to typowa wartość. Ta opcja nie ma żadnego wpływu\n" "jeśli poprzednia ("nad-lista") jest ustawiona na "Nie"." #: Mailman/Gui/General.py:335 msgid "Send monthly password reminders?" msgstr "Wysyłać comiesięczne przypomnienia haseł?" #: Mailman/Gui/General.py:337 msgid "" "Turn this on if you want password reminders to be sent once\n" " per month to your members. Note that members may disable " "their\n" " own individual password reminders." msgstr "" "Włącz tę opcję, aby uaktywnić wysyłanie comiesięcznych przypomnień haseł\n" "do subskrybentów. Uwaga: subskrybenci mogą indywidualnie wyłączyć tę opcję." #: Mailman/Gui/General.py:342 msgid "" "List-specific text prepended to new-subscriber welcome\n" " message" msgstr "Tekst wstawiany przed informacją dla nowo zapisanych osób" #: Mailman/Gui/General.py:345 msgid "" "This value, if any, will be added to the front of the\n" " new-subscriber welcome message. The rest of the welcome " "message\n" " already describes the important addresses and URLs for the\n" " mailing list, so you don't need to include any of that kind of\n" " stuff here. This should just contain mission-specific kinds " "of\n" " things, like etiquette policies or team orientation, or that " "kind\n" " of thing.\n" "\n" "

    Note that this text will be wrapped, according to the\n" " following rules:\n" "

    • Each paragraph is filled so that no line is longer " "than\n" " 70 characters.\n" "
    • Any line that begins with whitespace is not filled.\n" "
    • A blank line separates paragraphs.\n" "
    " msgstr "" "Ten tekst (o ile zostanie podany) będzie wstawiony przed powitalną\n" "informacją dla nowo zapisanych. Pozostała część wiadomości zawiera istotne " "adresy\n" "i odsyłacze, a zatem nie musisz ich tutaj wymieniać. Można tutaj umieścić\n" "coś na kształt misji, reguł etykiety czy celu działania grupy.\n" "

    Uwaga: ten tekst zostanie zawinięty zgodnie z poniższymi regułami:\n" "

    • Każdy akapit jest wypełniany tak, że żaden wiersz nie jest\n" "dłuższy niż 70 znaków.\n" "
    • Każda linia, która rozpoczyna się od spacji/tabulatorów nie będzie\n" "wypełniana.\n" "
    • Pusty wiersz oddziela akapity.\n" "
    " #: Mailman/Gui/General.py:362 msgid "Send welcome message to newly subscribed members?" msgstr "Wysłać list powitalny do nowo zapisanych prenumeratorów?" #: Mailman/Gui/General.py:363 msgid "" "Turn this off only if you plan on subscribing people manually\n" " and don't want them to know that you did so. This option is " "most\n" " useful for transparently migrating lists from some other " "mailing\n" " list manager to Mailman." msgstr "" "Wyłącz tę opcję, jeśli planujesz samodzielnie zapisywać ludzi\n" "nie powiadamiając ich o tym fakcie. Ta opcja jest szczególnie użyteczna\n" "przy migrowaniu list z innego systemu zarządzania do Mailman'a." #: Mailman/Gui/General.py:369 msgid "" "Text sent to people leaving the list. If empty, no special\n" " text will be added to the unsubscribe message." msgstr "" "Tekst wysyłany do ludzi wypisujących się z listy. Jeśli pole pozostanie\n" "puste, do informacji o wypisaniu nie zostanie dołączony \n" "żaden dodatkowy tekst." #: Mailman/Gui/General.py:373 msgid "Send goodbye message to members when they are unsubscribed?" msgstr "Wysyłać pożegnalną wiadomość do ludzi wypisywanych z listy?" #: Mailman/Gui/General.py:376 msgid "" "Should the list moderators get immediate notice of new\n" " requests, as well as daily notices about collected ones?" msgstr "" "Czy administrator ma otrzymywać bezzwłoczną informację o nowych prośbach\n" "oprócz codziennych przypomnień o skolejkowanych zadaniach?" #: Mailman/Gui/General.py:379 msgid "" "List moderators (and list administrators) are sent daily\n" " reminders of requests pending approval, like subscriptions to " "a\n" " moderated list, or postings that are being held for one reason " "or\n" " another. Setting this option causes notices to be sent\n" " immediately on the arrival of new requests as well." msgstr "" "Moderatorzy i administratorzy otrzymują codziennie przypomnienia\n" "z listą skolejkowanych zadań, jak np. subskrypcje na moderowaną listę\n" "czy też wiadomości wstrzymane z określonego powodu. Ustawienie tej opcji\n" "powoduje, że przypomnienia będą wysyłane dodatkowo natychmiast po\n" "dodaniu nowego zadania do kolejki." #: Mailman/Gui/General.py:386 msgid "" "Should administrator get notices of subscribes and\n" " unsubscribes?" msgstr "" "Czy administrator ma otrzymywać wiadomości o zapisywaniu/wypisywaniu się?" #: Mailman/Gui/General.py:391 msgid "Send mail to poster when their posting is held for approval?" msgstr "" "Wysyłać wiadomość do nadawcy, jeśli jego list został wstrzymany\n" "w celu zatwierdzenia?" #: Mailman/Gui/General.py:394 msgid "Additional settings" msgstr "Dodatkowe ustawienia" #: Mailman/Gui/General.py:397 msgid "Emergency moderation of all list traffic." msgstr "Moderowanie awaryjne." #: Mailman/Gui/General.py:398 msgid "" "When this option is enabled, all list traffic is emergency\n" " moderated, i.e. held for moderation. Turn this option on when\n" " your list is experiencing a flamewar and you want a cooling " "off\n" " period." msgstr "" "Po włączeniu tej opcji wszystkie wiadomości zatrzymywane są do moderowania. " "Moderowanie awaryjne przydaje się np., by ostudzić gorącą dyskusję." #: Mailman/Gui/General.py:410 msgid "" "Default options for new members joining this list." msgstr "" "Domyślne ustawienia dla nowych prenumeratorów." #: Mailman/Gui/General.py:413 msgid "" "When a new member is subscribed to this list, their initial\n" " set of options is taken from this variable's setting." msgstr "" "Podczas zapisywania się nowych osób, opcje prenumeraty są zgodne z tymi " "ustawieniami." #: Mailman/Gui/General.py:417 msgid "" "(Administrivia filter) Check postings and intercept ones\n" " that seem to be administrative requests?" msgstr "" "(Filtr administracyjny) Sprawdzać wiadomości i przechwytywać te,\n" "które wyglądają na prośby administracyjne?" #: Mailman/Gui/General.py:420 msgid "" "Administrivia tests will check postings to see whether it's\n" " really meant as an administrative request (like subscribe,\n" " unsubscribe, etc), and will add it to the the administrative\n" " requests queue, notifying the administrator of the new " "request,\n" " in the process." msgstr "" "Filtr administracyjny sprawdza, czy wiadomości rzeczywiście są\n" "prośbami administracyjnymi (jak np. subscribe,\n" "unsubscribe itp.), a następnie dołącza je do kolejki zadań\n" "jednocześnie informując o tym administratorów." #: Mailman/Gui/General.py:427 msgid "" "Maximum length in kilobytes (KB) of a message body. Use 0\n" " for no limit." msgstr "" "Maksymalna wielkość treści listu w kilobajtach (KB). Wprowadź 0, aby\n" "wyłączyć limit." #: Mailman/Gui/General.py:431 msgid "" "Maximum number of members to show on one page of the\n" " Membership List." msgstr "" "Maksymalna liczba prenumeratorów wyświetlana na stronie\n" "listy subskrybentów." #: Mailman/Gui/General.py:435 msgid "Host name this list prefers for email." msgstr "Preferowana nazwa serwera dla e-maili związanych z tą listą." #: Mailman/Gui/General.py:437 msgid "" "The \"host_name\" is the preferred name for email to\n" " mailman-related addresses on this host, and generally should " "be\n" " the mail host's exchanger address, if any. This setting can " "be\n" " useful for selecting among alternative names of a host that " "has\n" " multiple addresses." msgstr "" "Preferowana nazwa serwera jest używana w adresach Mailman'a i zwykle\n" "powinna nią być nazwa węzła pocztowego, o ile jest to konieczne.\n" "Ta opcja może być również użyteczna do wybrania jednej z nazw w przypadku\n" "serwerów z przypisanymi wieloma adresami." #: Mailman/Gui/General.py:449 msgid "" "Should messages from this mailing list include the\n" " RFC 2369\n" " (i.e. List-*) headers? Yes is highly\n" " recommended." msgstr "" "Czy wiadomości z tej listy mają zawierać nagłówki zgodne z\n" "RFC 2369\n" "(tj. List-*)? Tak to zalecany wybór." #: Mailman/Gui/General.py:454 msgid "" "RFC 2369 defines a set of List-* headers that are\n" " normally added to every message sent to the list " "membership.\n" " These greatly aid end-users who are using standards " "compliant\n" " mail readers. They should normally always be enabled.\n" "\n" "

    However, not all mail readers are standards compliant " "yet,\n" " and if you have a large number of members who are using\n" " non-compliant mail readers, they may be annoyed at these\n" " headers. You should first try to educate your members as " "to\n" " why these headers exist, and how to hide them in their " "mail\n" " clients. As a last resort you can disable these headers, " "but\n" " this is not recommended (and in fact, your ability to " "disable\n" " these headers may eventually go away)." msgstr "" "RFC 2369 definiuje zestaw nagłówków List-*, które są typowo dodawane\n" "do wszystkich wiadomości wysyłanych na listę. Pomagają one użytkownikom\n" "korzystającym z czytników poczty zgodnych ze standardami. W większości\n" "przypadków opcja powinna być włączona.\n" "\n" "

    Niestety, na razie nie wszystkie czytniki są zgodne ze standardami\n" "i jeśli wielu prenumeratorów ich używa, dodatkowe nagłówki mogą im\n" "przeszkadzać. Powinieneś po pierwsze wyjaśnić prenumeratorom, dlaczego\n" "istnieją takie nagłówki i w jaki sposób można wyłączyć ich wyświetlanie\n" "w ich czytnikach pocztowych. Jako ostatnią deskę ratunku możesz\n" "wyłączyć te nagłówki, ale nie jest to zalecane (i być może ta opcja\n" "zostanie w przyszłości usunięta)." #: Mailman/Gui/General.py:472 msgid "Should postings include the List-Post: header?" msgstr "Czy wiadomości mają zawierać pole nagłówka List-Post:?" #: Mailman/Gui/General.py:473 msgid "" "The List-Post: header is one of the headers\n" " recommended by\n" " RFC 2369.\n" " However for some announce-only mailing lists, only a\n" " very select group of people are allowed to post to the list; " "the\n" " general membership is usually not allowed to post. For lists " "of\n" " this nature, the List-Post: header is misleading.\n" " Select No to disable the inclusion of this header. " "(This\n" " does not affect the inclusion of the other List-*:\n" " headers.)" msgstr "" "Pole nagłówka List-Post: jest jednym z pól zalecanych przez \n" "RFC 2369. \n" "Jednak czasami, jeśli lista ma charakter tylko jednostronnych anonsów, \n" "większość osób nie ma prawa wysyłania na nią wiadomości i nagłówek \n" " List-Post: może wprowadzać zamieszanie. Zaznaczenie \n" "odpowiedzi Nie wyłączy dołączanie tego pola nagłówka. \n" "(Opcja nie dotyczy dołączania pozostałych pól nagłówka typu \n" "List-*:. )" #: Mailman/Gui/General.py:489 #, fuzzy msgid "" "Should the Sender header be rewritten for this\n" " mailing list to avoid stray bounces? Yes is\n" " recommended." msgstr "" "Czy Mailman powinien wysyłać opiekunowi listy powiadomienia o " "nierozpoznanych zwrotach? Odpowiedź Tak jest zalecana." #: Mailman/Gui/General.py:493 msgid "" "RFC\n" " 2822 defines the Sender header and defines it\n" " as \"the mailbox of the agent responsible for the actual\n" " transmission of the message.\" Mailman replaces this " "header\n" " by default with the list's bounce address.\n" " \n" "

    While it is debatable if Mailman is such an agent, " "setting\n" " this header helps directing bounces from some broken MTAs " "to\n" " the right destination. On the other hand, some mail\n" " readers show unexpected behaviour if this header is set " "(like\n" " missing addresses in forwarded mails and copies sent to " "the\n" " bounce address on reply-to-all), so it can be disabled \n" " here." msgstr "" #: Mailman/Gui/General.py:511 msgid "" "Discard held messages older than this number of days.\n" " Use 0 for no automatic discarding." msgstr "" "Zignoruj wiadomości wstrzymane dawniej niż określona ilość dni.\n" " Zero (O) wyłącza takie automatyczne ignorowanie." #: Mailman/Gui/General.py:521 msgid "" "real_name attribute not\n" " changed! It must differ from the list's name by case\n" " only." msgstr "" "

    Atrybut real_name nie\n" " został zmieniony! Może się on różnić od nazwy listy\n" " jedynie wielkością liter." #: Mailman/Gui/General.py:549 msgid "" "The info attribute you saved\n" "contains suspicious HTML that could potentially expose your users to cross-" "site\n" "scripting attacks. This change has therefore been rejected. If you still " "want\n" "to make these changes, you must have shell access to your Mailman server.\n" "This change can be made with bin/withlist or with bin/config_list by " "setting\n" "mlist.info.\n" " " msgstr "" #: Mailman/Gui/General.py:560 #, fuzzy msgid "" "admin_member_chunksize attribute not\n" " changed! It must be an integer > 0." msgstr "" "

    Atrybut real_name nie\n" " został zmieniony! Może się on różnić od nazwy listy\n" " jedynie wielkością liter." #: Mailman/Gui/General.py:570 msgid "" "You cannot add a Reply-To: to an explicit\n" " address if that address is blank. Resetting these values." msgstr "" "Nie można dodać pola Reply-To:, jeśli adres jest pusty.\n" "Anulowanie tych wartości." #: Mailman/Gui/Language.py:34 msgid "Language options" msgstr "Opcje językowe" #: Mailman/Gui/Language.py:66 msgid "Natural language (internationalization) options." msgstr "Opcje dotyczące ustawień międzynarodowych." #: Mailman/Gui/Language.py:71 msgid "Default language for this list." msgstr "Domyślny język tej listy." #: Mailman/Gui/Language.py:72 msgid "" "This is the default natural language for this mailing list.\n" " If more than " "one\n" " language is supported then users will be able to select " "their\n" " own preferences for when they interact with the list. All " "other\n" " interactions will be conducted in the default language. This\n" " applies to both web-based and email-based messages, but not to\n" " email posted by list members." msgstr "" "To jest domyślny język tej listy. Jeśli obsługiwanych jest\n" "więcej języków,\n" "użytkownicy będą mieli możliwość wyboru według własnych preferencji.\n" "Dotyczy to zarówno\n" "komunikacji przez WWW jak i e-mail, ale nie ma wpływu na listy\n" "wysyłane przez subskrybentów." #: Mailman/Gui/Language.py:82 msgid "Languages supported by this list." msgstr "Języki obsługiwane przez tę listę." #: Mailman/Gui/Language.py:84 msgid "" "These are all the natural languages supported by this list.\n" " Note that the\n" " default\n" " language must be included." msgstr "" "Są to wszystkie języki obsługiwane przez listę. Uwaga:\n" "język domyślny\n" "musi być dołączony." #: Mailman/Gui/Language.py:90 msgid "Always" msgstr "Zawsze" #: Mailman/Gui/Language.py:90 msgid "As needed" msgstr "Jeśli potrzebne" #: Mailman/Gui/Language.py:90 msgid "Never" msgstr "Nigdy" #: Mailman/Gui/Language.py:91 msgid "" "Encode the\n" " subject\n" " prefix even when it consists of only ASCII characters?" msgstr "" "Czy kodować prefiks tematu " "wiadomości, nawet jeśli zawiera on tylko znaki ASCII?" #: Mailman/Gui/Language.py:95 msgid "" "If your mailing list's default language uses a non-ASCII\n" " character set and the prefix contains non-ASCII characters, " "the\n" " prefix will always be encoded according to the relevant\n" " standards. However, if your prefix contains only ASCII\n" " characters, you may want to set this option to Never " "to\n" " disable prefix encoding. This can make the subject headers\n" " slightly more readable for users with mail readers that don't\n" " properly handle non-ASCII encodings.\n" "\n" "

    Note however, that if your mailing list receives both " "encoded\n" " and unencoded subject headers, you might want to choose As\n" " needed. Using this setting, Mailman will not encode " "ASCII\n" " prefixes when the rest of the header contains only ASCII\n" " characters, but if the original header contains non-ASCII\n" " characters, it will encode the prefix. This avoids an " "ambiguity\n" " in the standards which could cause some mail readers to " "display\n" " extra, or missing spaces between the prefix and the original\n" " header." msgstr "" #: Mailman/Gui/Membership.py:26 msgid "Membership Management..." msgstr "Zarządzanie prenumeratą..." #: Mailman/Gui/Membership.py:30 msgid "Membership List" msgstr "Lista prenumeratorów" #: Mailman/Gui/Membership.py:31 msgid "Mass Subscription" msgstr "Hurtowe zapisywanie" #: Mailman/Gui/Membership.py:32 msgid "Mass Removal" msgstr "Hurtowe wypisywanie" #: Mailman/Gui/NonDigest.py:35 msgid "Non-digest options" msgstr "Opcje trybu wiadomości" #: Mailman/Gui/NonDigest.py:43 msgid "Policies concerning immediately delivered list traffic." msgstr "Reguły dotyczące listów wysyłanych natychmiast." #: Mailman/Gui/NonDigest.py:46 msgid "" "Can subscribers choose to receive mail immediately, rather\n" " than in batched digests?" msgstr "" "Czy prenumeratorzy mogą wybrać otrzymywanie poczty natychmiast,\n" "zamiast wiadomości zgrupowanych w paczki?" #: Mailman/Gui/NonDigest.py:53 msgid "Full Personalization" msgstr "Pełna personalizacja" #: Mailman/Gui/NonDigest.py:55 msgid "" "Should Mailman personalize each non-digest delivery?\n" " This is often useful for announce-only lists, but read the details\n" " section for a discussion of important performance\n" " issues." msgstr "" "Czy Mailman powinien personalizować każdą wiadomość?\n" "To przydatna opcja dla list ogłoszeniowych (biuletynów), ale\n" "zajrzyj do pomocy\n" "aby przeczytać o istotnych problemach związanych z wydajnością." #: Mailman/Gui/NonDigest.py:61 msgid "" "Normally, Mailman sends the regular delivery messages to\n" " the mail server in batches. This is much more efficent\n" " because it reduces the amount of traffic between Mailman " "and\n" " the mail server.\n" "\n" "

    However, some lists can benefit from a more " "personalized\n" " approach. In this case, Mailman crafts a new message for\n" " each member on the regular delivery list. Turning this\n" " feature on may degrade the performance of your site, so " "you\n" " need to carefully consider whether the trade-off is worth " "it,\n" " or whether there are other ways to accomplish what you " "want.\n" " You should also carefully monitor your system load to make\n" " sure it is acceptable.\n" "\n" "

    Select No to disable personalization and send\n" " messages to the members in batches. Select Yes " "to\n" " personalize deliveries and allow additional substitution\n" " variables in message headers and footers (see below). In\n" " addition, by selecting Full Personalization, the\n" " To header of posted messages will be modified " "to\n" " include the member's address instead of the list's posting\n" " address.\n" "\n" "

    When personalization is enabled, a few more expansion\n" " variables can be included in the message header " "and\n" " message footer.\n" "\n" "

    These additional substitution variables will be " "available\n" " for your headers and footers, when this feature is " "enabled:\n" "\n" "

    \n" " " msgstr "" "W normalnych ustawieniach, Mailman wysyła wiadomości do serwera poczty\n" "w porcjach. Jest to znacznie bardziej efektywne, ponieważ redukuje ilość\n" "ruchu pomiędzy Mailman'em, a serwerem poczty.\n" "\n" "

    Jednakże, dla niektórych list pożądane jest bardziej spersonalizowane\n" "ustawienie. W tym przypadku Mailman tworzy nową wiadomość dla każdego " "zwykłego\n" "prenumeratora. Włączenie tej opcji może pogorszyć wydajność serwera,\n" "a zatem należy dokładnie rozważyć, czy jest to akceptowalne, czy też\n" "istnieją inne możliwości osiągnięcia celu.\n" "Powinieneś również dokładnie monitorować obciążenie systemu aby\n" "upewnić się, że jest ono akceptowalne.\n" "\n" "

    Ustaw Nie, żeby wyłączyć personalizacje i wysyłać wszystkie \n" "wiadomości w porcjach. Ustawienie Tak pozwala na personalizację\n" "dostarczania i dodatkowe podstawianie zmiennych w nagłówku i stopce\n" "(patrz niżej). Opcja Pełna Personalizacja, pozwala dodatkowo\n" "zmienić pole nagłowka To, by zawierało adres prenumeratora, \n" " a nie adres listy.\n" "

    Po włączeniu opcji personalizacji wykonywane są dwie dodatkowe\n" "operacje. Po pierwsze, nagłówek To: (Do:)\n" "wysyłanego listu jest modyfikowany tak, aby zawierał adres subskrybenta,\n" "a zatem list wygląda jakby był adresowany do użytkownika, a nie na listę.\n" "\n" "

    Po drugie, ustawiane są dodatkowe zmienne, których można użyć w\n" "nagłówku i\n" "stopce wiadomości.\n" "\n" "

    Chodzi o następujące zmienne:\n" "\n" "

    • user_address - Adres użytkownika skonwertowany na małe\n" "litery.\n" "
    • user_delivered_to - Adres użytkownika z zachowaniem wielkości\n" "liter.\n" "
    • user_password - Hasło użytkownika.\n" "
    • user_name - Imię i nazwisko użytkownika.\n" "
    • user_optionsurl - Adres URL do strony WWW z ustawieniami\n" "opcji użytkownika.\n" "
    " #: Mailman/Gui/NonDigest.py:110 msgid "" "When personalization is " "enabled\n" "for this list, additional substitution variables are allowed in your " "headers\n" "and footers:\n" "\n" "
    • user_address - The address of the user,\n" " coerced to lower case.\n" "
    • user_delivered_to - The case-preserved address\n" " that the user is subscribed with.\n" "
    • user_password - The user's password.\n" "
    • user_name - The user's full name.\n" "
    • user_optionsurl - The url to the user's option\n" " page.\n" "
    \n" msgstr "" #: Mailman/Gui/NonDigest.py:129 msgid "Header added to mail sent to regular list members" msgstr "Nagłówek dodawany do poczty wysyłanej do zwykłych prenumeratorów." #: Mailman/Gui/NonDigest.py:130 msgid "" "Text prepended to the top of every immediately-delivery\n" " message. " msgstr "Tekst wstawiany przed każdą wiadomością do zwykłych prenumeratorów." #: Mailman/Gui/NonDigest.py:134 msgid "Footer added to mail sent to regular list members" msgstr "Stopka dodawana do wiadomości dla zwykłych prenumeratorów." #: Mailman/Gui/NonDigest.py:135 msgid "" "Text appended to the bottom of every immediately-delivery\n" " message. " msgstr "Tekst dołączany do stopki każdej wiadomości." #: Mailman/Gui/NonDigest.py:141 msgid "Scrub attachments of regular delivery message?" msgstr "" "Odrzucić wszystkie załączniki w wiadomościach wysyłanych w trybie listów?" #: Mailman/Gui/NonDigest.py:142 msgid "" "When you scrub attachments, they are stored in the archive\n" " area and links are made in the message so that the member can\n" " access them via a web browser. If you want the attachments to\n" " totally disappear, you can use content filtering options." msgstr "" "Odrzucenie załączników oznacza, że nadal będą one dostępne\n" " w archiwum na stronie www. Całkowite usunięcie załącznika \n" " możliwe jest dzięki opcji filtrowania treści." #: Mailman/Gui/NonDigest.py:149 msgid "Sibling lists" msgstr "Listy siostrzane" #: Mailman/Gui/NonDigest.py:152 msgid "" "Other mailing lists on this site whose members are\n" " excluded from the regular (non-digest) delivery if those\n" " list addresses appear in a To: or Cc: header." msgstr "" #: Mailman/Gui/NonDigest.py:155 msgid "" "The list addresses should be written in full mail address\n" " format (e.g. mailman@example.com). Do not specify this list\n" " address mutually in the exclude list configuration page of the\n" " other list, or members of both lists won't get any message.\n" " Note also that the site administrator may prohibit cross " "domain\n" " siblings." msgstr "" #: Mailman/Gui/NonDigest.py:163 msgid "" "Ignore regular_exlude_lists of which the poster is not a\n" " member." msgstr "" #: Mailman/Gui/NonDigest.py:165 msgid "" "If a post is addressed to this list and to one or more of\n" " the exclude lists, regular members of those lists will not be\n" " sent the post from this list, but if the poster is not a " "member\n" " of an excluded list, the post may not be accepted by that list\n" " which leaves the members of that list with no copy of the " "post.\n" " Setting this to Yes ignores any of the exclude lists of which " "the\n" " poster is not a member." msgstr "" #: Mailman/Gui/NonDigest.py:174 msgid "" "Other mailing lists on this site whose members are\n" " included in the regular (non-digest) delivery if those\n" " list addresses don't appear in a To: or Cc: header." msgstr "" #: Mailman/Gui/NonDigest.py:177 msgid "" "The list addresses should be written in full mail address\n" " format (e.g. mailman@example.com). Note also that the site\n" " administrator may prohibit cross domain siblings." msgstr "" #: Mailman/Gui/Passwords.py:27 msgid "Passwords" msgstr "Hasła" #: Mailman/Gui/Privacy.py:37 msgid "Privacy options..." msgstr "Opcje prywatności..." #: Mailman/Gui/Privacy.py:41 msgid "Subscription rules" msgstr "Zasady subskrypcji" #: Mailman/Gui/Privacy.py:42 msgid "Sender filters" msgstr "Filtry nadawcy" #: Mailman/Gui/Privacy.py:43 msgid "Recipient filters" msgstr "Filtry odbiorcy" #: Mailman/Gui/Privacy.py:44 msgid "Spam filters" msgstr "Filtry spamu" #: Mailman/Gui/Privacy.py:58 Mailman/Gui/Usenet.py:63 msgid "None" msgstr "Brak" #: Mailman/Gui/Privacy.py:59 Mailman/Gui/Privacy.py:82 msgid "Confirm" msgstr "Potwierdzenie" #: Mailman/Gui/Privacy.py:60 Mailman/Gui/Privacy.py:83 msgid "Require approval" msgstr "Zgoda administratora" #: Mailman/Gui/Privacy.py:61 Mailman/Gui/Privacy.py:84 msgid "Confirm and approve" msgstr "Potwierdzenie i zgoda administratora" #: Mailman/Gui/Privacy.py:63 Mailman/Gui/Privacy.py:86 msgid "What steps are required for subscription?
    " msgstr "Jakie warunki są niezbędne do zapisania się?
    " #: Mailman/Gui/Privacy.py:64 msgid "" "None - no verification steps (Not\n" " Recommended )
    \n" " Confirm (*) - email confirmation step required " "
    \n" " Require approval - require list administrator\n" " Approval for subscriptions
    \n" " Confirm and approve - both confirm and approve\n" " \n" "

    (*) when someone requests a subscription,\n" " Mailman sends them a notice with a unique\n" " subscription request number that they must reply " "to\n" " in order to subscribe.
    \n" "\n" " This prevents mischievous (or malicious) people\n" " from creating subscriptions for others without\n" " their consent." msgstr "" "Brak - brak czynności weryfikacyjnych (nie zalecane)
    \n" "Potwierdzenie (*) - wymagane potwierdzenie poprzez e-mail
    \n" "Zgoda administratora - subskrypcja wymaga aprobaty administratora listy
    \n" "Potwierdzenie i zgoda administratora - oba wyżej wymienione wymagania\n" "

    (*) Gdy ktoś zgłosi chęć zapisania się, Mailman wysyła wiadomość\n" "zawierającą niepowtarzalny numer subskrybcji, który musi zostać odesłany\n" "w celu zapisania użytkownika.
    \n" "\n" "Zapobiega to żartom lub złośliwościom ze strony ludzi próbujących zapisać\n" "innych bez ich zgody." #: Mailman/Gui/Privacy.py:87 msgid "" "Confirm (*) - email confirmation required
    \n" " Require approval - require list administrator\n" " approval for subscriptions
    \n" " Confirm and approve - both confirm and approve\n" " \n" "

    (*) when someone requests a subscription,\n" " Mailman sends them a notice with a unique\n" " subscription request number that they must reply " "to\n" " in order to subscribe.
    This prevents\n" " mischievous (or malicious) people from creating\n" " subscriptions for others without their consent." msgstr "" "Potwierdzenie (*) - wymagane potwierdzenie poprzez e-mail
    \n" "Zgoda administratora - subskrypcja wymaga aprobaty administratora listy
    \n" "Potwierdzenie i zgoda administratora - oba wyżej wymienione wymagania\n" "

    (*) Gdy ktoś zgłosi chęć zapisania się, Mailman wysyła wiadomość\n" "zawierającą niepowtarzalny numer subskrybcji, który musi zostać odesłany\n" "w celu zapisania użytkownika.
    \n" "\n" "Zapobiega to żartom lub złośliwościom ze strony ludzi próbujących zapisać\n" "innych bez ich zgody." #: Mailman/Gui/Privacy.py:103 msgid "" "This section allows you to configure subscription and\n" " membership exposure policy. You can also control whether this\n" " list is public or not. See also the\n" " Archival Options section for\n" " separate archive-related privacy settings." msgstr "" "Ta część umożliwia skonfigurowanie reguł dotyczących jawności prenumeraty\n" "i listy subskrybentów. Możesz też wybrać, czy lista będzie publicznie\n" "dostępna, czy też nie. Sprawdź też\n" "Opcje archiwizacji aby ustawić parametry\n" "związane z prywatnością archiwów listy." #: Mailman/Gui/Privacy.py:109 msgid "Subscribing" msgstr "Prenumerata" #: Mailman/Gui/Privacy.py:111 msgid "" "Advertise this list when people ask what lists are on this\n" " machine?" msgstr "" "Wyświetlać tę listę na żądanie pokazania list działających na tym serwerze?" #: Mailman/Gui/Privacy.py:117 msgid "" "Is the list moderator's approval required for unsubscription\n" " requests? (No is recommended)" msgstr "" "Czy jest wymagana zgoda moderatora na wypisanie się z listy (Nie\n" "jest zalecane)" #: Mailman/Gui/Privacy.py:120 msgid "" "When members want to leave a list, they will make an\n" " unsubscription request, either via the web or via email.\n" " Normally it is best for you to allow open unsubscriptions so " "that\n" " users can easily remove themselves from mailing lists (they " "get\n" " really upset if they can't get off lists!).\n" "\n" "

    For some lists though, you may want to impose moderator\n" " approval before an unsubscription request is processed. " "Examples\n" " of such lists include a corporate mailing list that all " "employees\n" " are required to be members of." msgstr "" #: Mailman/Gui/Privacy.py:131 msgid "Ban list" msgstr "Adresy zabronione" #: Mailman/Gui/Privacy.py:133 msgid "" "List of addresses which are banned from membership in this\n" " mailing list." msgstr "Lista adresów, z których subskrypcja jest zabroniona." #: Mailman/Gui/Privacy.py:136 msgid "" "Addresses in this list are banned outright from subscribing\n" " to this mailing list, with no further moderation required. " "Add\n" " addresses one per line; start the line with a ^ character to\n" " designate a regular expression match." msgstr "" "Czarna lista prenumeratorów.\n" " Nie będzie dla nich uruchamiany proces moderowania. \n" " Umieszczamy po jednym adresie w linii, jeśli chcesz \n" " wstawić wyrażenie regularne, zacznij je od znaku ^." #: Mailman/Gui/Privacy.py:141 msgid "Membership exposure" msgstr "Wyświetlenie listy prenumeratorów" #: Mailman/Gui/Privacy.py:143 msgid "Anyone" msgstr "Każdy" #: Mailman/Gui/Privacy.py:143 msgid "List admin only" msgstr "Tylko administrator listy" #: Mailman/Gui/Privacy.py:143 msgid "List members" msgstr "Tylko prenumeratorzy" #: Mailman/Gui/Privacy.py:144 msgid "Who can view subscription list?" msgstr "Kto może zobaczyć listę prenumeratorów?" #: Mailman/Gui/Privacy.py:146 msgid "" "When set, the list of subscribers is protected by member or\n" " admin password authentication." msgstr "Gdy włączone, lista prenumeratorów jest chroniona hasłem." #: Mailman/Gui/Privacy.py:150 msgid "" "Show member addresses so they're not directly recognizable\n" " as email addresses?" msgstr "" "Prezentacja adresów prenumeratorów w taki sposób, że nie są\n" " one rozpoznawane jako adres email." #: Mailman/Gui/Privacy.py:152 msgid "" "Setting this option causes member email addresses to be\n" " transformed when they are presented on list web pages (both in\n" " text and as links), so they're not trivially recognizable as\n" " email addresses. The intention is to prevent the addresses\n" " from being snarfed up by automated web scanners for use by\n" " spammers." msgstr "" "Włączenie tej opcji powoduje, że adresy adresy email prenumeratorów są\n" " zniekształcane, tak, że nie przypominają adresu email.\n" " Ma to na celu utrudnić pracę automatycznych skanerów sieci,\n" " które dostarczają listy adresów spamerom." #: Mailman/Gui/Privacy.py:163 #, fuzzy msgid "/Quarantine" msgstr "Kwartalnie" #: Mailman/Gui/Privacy.py:167 msgid "" "When a message is posted to the list, a series of\n" " moderation steps are taken to decide whether a moderator must\n" " first approve the message or not. This section contains the\n" " controls for moderation of both member and non-member postings.\n" "\n" "

    Member postings are held for moderation if their\n" " moderation flag is turned on. You can control whether\n" " member postings are moderated by default or not.\n" "\n" "

    Non-member postings can be automatically\n" " accepted,\n" " held " "for\n" " moderation,\n" " rejected (bounced), or\n" " discarded,\n" " either individually or as a group. Any\n" " posting from a non-member who is not explicitly accepted,\n" " rejected, or discarded, will have their posting filtered by the\n" " general\n" " non-member rules.\n" "\n" "

    In the text boxes below, add one address per line; start the\n" " line with a ^ character to designate a Python regular expression. When entering backslashes, do " "so\n" " as if you were using Python raw strings (i.e. you generally " "just\n" " use a single backslash).\n" "\n" "

    Note that non-regexp matches are always done first." msgstr "" "Po wysłaniu wiadomości na listę, Mailman przeprowadza analizę \n" " co należy dalej z nią zrobić (sprawdzany jest adres nadawcy).\n" "Ta sekcja umożliwia kontrolowanie wiadomości wysyłanych przez .\n" "prenumeratorów lub osoby spoza listy.\n" "

    Jeśli znacznik moderowania jest aktywny dla " "prenumeratorów oznacza \n" " to, że jego listy będą zatrzymywane do \n" " moderowania.\n" "\n" "

    Wiadomości od osób nie zapisanych mogą być automatycznie\n" " akceptowane,\n" " \n" " zatrzymywane do moderowania,\n" " odrzucane (odbite) lub\n" " kasowane,\n" " zarówno indywidualnie jak i grupowo. Każdy email wysłany \n" " przez osobę nie będącą prenumeratorem, który nie został wprost\n" " zaakceptowany, odrzucony lub skasowany, podlega\n" " ogólnej\n" " zasadzie stosowanej dla nie subskrybentów.

    W polach należy " "wpisywać po jednym adresie w linii. Znak ^ napoczątku nowej linii oznacza wyrażenie regularne w " "Pythonie.

    Pamiętaj, że linie bez użycia wyrażeń regularnych są " "dopasowywane wcześniej." #: Mailman/Gui/Privacy.py:200 msgid "Member filters" msgstr "Filtry prenumeratorów" #: Mailman/Gui/Privacy.py:203 msgid "By default, should new list member postings be moderated?" msgstr "Czy domyślnie wiadomości od nowych prenumeratorów mają być moderowane?" #: Mailman/Gui/Privacy.py:205 msgid "" "Each list member has a moderation flag which says\n" " whether messages from the list member can be posted directly " "to\n" " the list, or must first be approved by the list moderator. " "When\n" " the moderation flag is turned on, list member postings must be\n" " approved first. You, the list administrator can decide whether " "a\n" " specific individual's postings will be moderated or not.\n" "\n" "

    When a new member is subscribed, their initial moderation " "flag\n" " takes its value from this option. Turn this option off to " "accept\n" " member postings by default. Turn this option on to, by " "default,\n" " moderate member postings first. You can always manually set " "an\n" " individual member's moderation bit by using the\n" " membership management\n" " screens." msgstr "" "Każdy z prenumeratorów może mieć ustawiony znacznik moderowania\n" " który określa, czy wiadomości przez niego wysyłane muszą być \n" " potwierdzone przez moderatora przed przekazaniem na listę. \n" " Włączony znacznik moderowania oznacza, że wiadomości \n" " wysyłane przez danego subskrybenta muszą być potwierdzone \n" " przez moderatora. \n" "

    Podczas zapisywania nowego prenumeratora, jego znacznik \n" " moderowania ustawiany jest na podstawie tej opcji. \n" " Wyłączenie tej opcji powoduje, że domyślnie listy \n" " subskrybentów są akceptowane. Jej włączenie powoduję, że \n" " listy domyślnie są moderowane. Dodatkowo można ustawić \n" " znacznik moderowania dla każdego subskrybenta osobno \n" " korzystając ze strony zarządzania \n" " prenumeratorami. " #: Mailman/Gui/Privacy.py:222 msgid "" "Action to take when a moderated member posts to the\n" " list." msgstr "Co zrobić z wiadomościami wysłanymi z moderowanego adresu." #: Mailman/Gui/Privacy.py:224 msgid "" "

    • Hold -- this holds the message for approval\n" " by the list moderators.\n" "\n" "

    • Reject -- this automatically rejects the message " "by\n" " sending a bounce notice to the post's author. The text of the\n" " bounce notice can be configured by you.\n" "\n" "

    • Discard -- this simply discards the message, " "with\n" " no notice sent to the post's author.\n" "
    " msgstr "" "
    • Wstrzymaj -- wstrzymuje wiadomość do akceptacji \n" " moderatora listy.\n" "

    • Odmów -- powoduje automatyczne odrzucenie wiadomości i " "powiadomienie\n" " o tym autora. Tekst powiadomienia o odrzuceniu można \n" "\n" "zmienić tutaj.\n" "

    • Zignoruj -- zignoruj wiadomość, bez powiadamiania autora. \n" "
    " #: Mailman/Gui/Privacy.py:238 msgid "" "Text to include in any\n" " rejection notice to\n" " be sent to moderated members who post to this list." msgstr "" "Tekst, który zostanie dołączony do każdego powiadomienia o odrzuceniu wiadomości " "od moderowanego subskrybenta listy." #: Mailman/Gui/Privacy.py:246 #, fuzzy msgid "" "Action to take when anyone posts to the\n" " list from a domain with a DMARC Reject%(quarantine)s Policy." msgstr "Co zrobić z wiadomościami wysłanymi z moderowanego adresu." #: Mailman/Gui/Privacy.py:249 #, fuzzy msgid "" "
    • Munge From -- applies the from_is_list Munge From\n" " transformation to these messages.\n" "\n" "

    • Wrap Message -- applies the from_is_list Wrap\n" " Message transformation to these messages.\n" "\n" "

    • Reject -- this automatically rejects the message " "by\n" " sending a bounce notice to the post's author. The text of the\n" " bounce notice can be configured by you.\n" "\n" "

    • Discard -- this simply discards the message, " "with\n" " no notice sent to the post's author.\n" "
    \n" "\n" "

    This setting takes precedence over the from_is_list " "setting\n" " if the message is From: an affected domain and the setting is\n" " other than Accept." msgstr "" "

    • Wstrzymaj -- wstrzymuje wiadomość do akceptacji \n" " moderatora listy.\n" "

    • Odmów -- powoduje automatyczne odrzucenie wiadomości i " "powiadomienie\n" " o tym autora. Tekst powiadomienia o odrzuceniu można \n" "\n" "zmienić tutaj.\n" "

    • Zignoruj -- zignoruj wiadomość, bez powiadamiania autora. \n" "
    " #: Mailman/Gui/Privacy.py:274 msgid "" "Shall the above dmarc_moderation_action apply to messages\n" " From: domains with DMARC p=quarantine as well as p=reject" msgstr "" #: Mailman/Gui/Privacy.py:277 msgid "" "
    • No -- this applies dmarc_moderation_action to\n" " only those posts From: a domain with DMARC p=reject. This " "is\n" " appropriate if you are concerned about bounced messages, but\n" " want to apply dmarc_moderation_action to as few messages as\n" " possible.\n" "

    • Yes -- this applies dmarc_moderation_action to\n" " posts From: a domain with DMARC p=reject or p=quarantine.\n" "

    If a message is From: a domain with DMARC " "p=quarantine\n" " and dmarc_moderation_action is not applied (this set to No)\n" " the message will likely not bounce, but will be delivered to\n" " recipients' spam folders or other hard to find places." msgstr "" #: Mailman/Gui/Privacy.py:290 #, fuzzy msgid "" "Text to include in any\n" " rejection notice to\n" " be sent to anyone who posts to this list from a domain\n" " with a DMARC Reject%(quarantine)s Policy." msgstr "" "Tekst, który zostanie dołączony do każdego powiadomienia o odrzuceniu wiadomości " "od moderowanego subskrybenta listy." #: Mailman/Gui/Privacy.py:296 msgid "Non-member filters" msgstr "Filtrowanie osób nie będących prenumeratorami" #: Mailman/Gui/Privacy.py:299 msgid "" "List of non-member addresses whose postings should be\n" " automatically accepted." msgstr "" "Lista adresów osób nie będących prenumeratorami, których wiadomości powinny " "być\n" " automatycznie akceptowane." #: Mailman/Gui/Privacy.py:306 #, fuzzy msgid "" "Postings from any of these non-members will be automatically\n" " accepted with no further moderation applied. Add member\n" " addresses one per line; start the line with a ^ character to\n" " designate a regular expression match. A line consisting of\n" " the @ character followed by a list name specifies another\n" " Mailman list in this installation, all of whose member\n" " addresses will be accepted for this list." msgstr "" "Listy wysłane przez osoby nie będące prenumeratorami\n" " będą automatycznie akceptowane bez \n" " moderacji. Umieszczaj po jednym adresie w linii; \n" " rozpocznij linię od znaku ^ , żeby wprowadzić wyrażenie \n" " regularne." #: Mailman/Gui/Privacy.py:315 msgid "" "List of non-member addresses whose postings will be\n" " immediately held for moderation." msgstr "" "Lista adresów osób nie będących prenumeratorami, których emaile będą \n" " zatrzymywane do moderowania." #: Mailman/Gui/Privacy.py:318 msgid "" "Postings from any of these non-members will be immediately\n" " and automatically held for moderation by the list moderators.\n" " The sender will receive a notification message which will " "allow\n" " them to cancel their held message. Add member addresses one " "per\n" " line; start the line with a ^ character to designate a regular\n" " expression match." msgstr "" "Wiadomości wysyłane z tych adresów będą\n" " natychmiast i automatycznie zatrzymywane do moderacji.\n" " Wysyłający otrzyma powiadomienie, które pozwoli mu \n" " skasować wstrzymaną wiadomość. Umieszczaj po jednym " "adresie w linii; \n" " rozpocznij linię od znaku ^ , żeby wprowadzić wyrażenie \n" " regularne." #: Mailman/Gui/Privacy.py:326 msgid "" "List of non-member addresses whose postings will be\n" " automatically rejected." msgstr "" "Lista adresów osób nie będących prenumeratorami, których wiadomości będą\n" " automatycznie odrzucane." #: Mailman/Gui/Privacy.py:329 msgid "" "Postings from any of these non-members will be automatically\n" " rejected. In other words, their messages will be bounced back " "to\n" " the sender with a notification of automatic rejection. This\n" " option is not appropriate for known spam senders; their " "messages\n" " should be\n" " automatically discarded.\n" "\n" "

    Add member addresses one per line; start the line with a ^\n" " character to designate a regular expression match." msgstr "" "Wiadomości wysyłane z tych adresów\n" " będą automatycznie odrzucane. Innymi słowy list zostanie \n" " odbity do nadawcy z informacją o automatycznym \n" " odrzuceniu. Ta opcja nie służy do odrzucania \n" " emaili od znanych spamerów. Ich wiadomości powinny być \n" " automatycznie kasowane." #: Mailman/Gui/Privacy.py:341 msgid "" "List of non-member addresses whose postings will be\n" " automatically discarded." msgstr "" "Lista adresów osób nie będących prenumeratorami, których wiadomości będą \n" " automatycznie kasowane." #: Mailman/Gui/Privacy.py:344 msgid "" "Postings from any of these non-members will be automatically\n" " discarded. That is, the message will be thrown away with no\n" " further processing or notification. The sender will not " "receive\n" " a notification or a bounce, however the list moderators can\n" " optionally receive copies of auto-discarded messages..\n" "\n" "

    Add member addresses one per line; start the line with a ^\n" " character to designate a regular expression match." msgstr "" #: Mailman/Gui/Privacy.py:356 msgid "" "Action to take for postings from non-members for which no\n" " explicit action is defined." msgstr "" "Reakcja na email od osoby nie będącej prenumeratorem, dla której nie \n" " określono żadnego działania." #: Mailman/Gui/Privacy.py:359 msgid "" "When a post from a non-member is received, the message's\n" " sender is matched against the list of explicitly\n" " accepted,\n" " held,\n" " rejected (bounced), and\n" " discarded addresses. If no match is found, then this " "action\n" " is taken." msgstr "" "Po otrzymaniu wiadomości od osoby nie będącej prenumeratorem, Mailman " "sprawdza czy jego adres \n" " znajduje się na liście adresów, dla których wiadomości mają " "być\n" " akceptowane,\n" " wstrzymane,\n" " odrzucone (odbicia) lub\n" " skasowane. Jeśli adres nie występuje na żadnej z tych " "list, \n" " podejmowana jest określona tutaj akcja." #: Mailman/Gui/Privacy.py:371 msgid "" "Should messages from non-members, which are automatically\n" " discarded, be forwarded to the list moderator?" msgstr "" "Czy wiadomości od osób nie będących prenumeratorami, które zostały \n" " automatycznie odrzucone, mają być przekazywane \n" " do moderatora listy?" #: Mailman/Gui/Privacy.py:375 msgid "" "Text to include in any rejection notice to be sent to\n" " non-members who post to this list. This notice can include\n" " the list's owner address by %%(listowner)s and replaces the\n" " internally crafted default message." msgstr "" #: Mailman/Gui/Privacy.py:383 msgid "" "This section allows you to configure various filters based on\n" " the recipient of the message." msgstr "" "Sekcja ta zawiera ustawienia filtrowanie wiadomości na podstawie adresu " "odbiorcy." #: Mailman/Gui/Privacy.py:386 msgid "Recipient filters" msgstr "Fitry odbiorcy" #: Mailman/Gui/Privacy.py:390 msgid "" "Must posts have list named in destination (to, cc) field\n" " (or be among the acceptable alias names, specified below)?" msgstr "" "W polu docelowym wiadomości musi wystąpić nazwa listy, \n" " pola (to, cc), (lub jeden z jej aliasów wymienionych\n" " poniżej)?" #: Mailman/Gui/Privacy.py:393 msgid "" "Many (in fact, most) spams do not explicitly name their\n" " myriad destinations in the explicit destination addresses - in\n" " fact often the To: field has a totally bogus address for\n" " obfuscation. The constraint applies only to the stuff in the\n" " address before the '@' sign, but still catches all such spams.\n" "\n" "

    The cost is that the list will not accept unhindered any\n" " postings relayed from other addresses, unless\n" "\n" "

      \n" "
    1. The relaying address has the same name, or\n" "\n" "
    2. The relaying address name is included on the options " "that\n" " specifies acceptable aliases for the list.\n" "\n" "
    " msgstr "" "Wiele (większość) wiadomości spamerskich nie zawiera adresu odbiorcy w polu\n" " Do. Często pole Do: nagłówka wiadomości zawiera\n" " śmieci. Wyrażenie stosowane jest tylko do części adresu\n" " przed znakiem '@'.\n" "\n" "

    W ten sposób lista nie zaakceptuje żadnego listu " "przekierowanego z innego adresu, chyba, że\n" "\n" "

      \n" "
    1. Przekierowywany adres ma tą samą część przed '@'\n" "\n" "
    2. Część przed '@' znajduje się na liście akceptowanych\n" " aliasów dla listy.\n" "\n" "
    " #: Mailman/Gui/Privacy.py:411 msgid "" "Alias names (regexps) which qualify as explicit to or cc\n" " destination names for this list." msgstr "" #: Mailman/Gui/Privacy.py:414 msgid "" "Alternate addresses that are acceptable when\n" " `require_explicit_destination' is enabled. This option takes " "a\n" " list of regular expressions, one per line, which is matched\n" " against every recipient address in the message. The matching " "is\n" " performed with Python's re.match() function, meaning they are\n" " anchored to the start of the string.\n" " \n" "

    For backwards compatibility with Mailman 1.1, if the regexp\n" " does not contain an `@', then the pattern is matched against " "just\n" " the local part of the recipient address. If that match fails, " "or\n" " if the pattern does contain an `@', then the pattern is " "matched\n" " against the entire recipient address.\n" " \n" "

    Matching against the local part is deprecated; in a future\n" " release, the pattern will always be matched against the entire\n" " recipient address." msgstr "" "Dodatkowych adresów można używać, jeśli włączona jest opcja\n" " 'require_explicit_destination'. Lista wyrażeń regularnych \n" " jest porównywana z każdym adresem docelowym przesyłki. \n" " Dopasowywanie jest robione za pomocą funkcji Pythona \n" " re.match(), co oznacza, że porównywanie rozpoczyna się od\n" " początku ciągu znaków.\n" " \n" "

    Aby zachować kompatybilność wstecz, jeśli wyrażenie \n" " regularne nie zawiera '@', dopasowywana jest tylko lokalna \n" " część adresu. Gdy wzorzec nie pasuje lub gdy wyrażenie \n" " zawiera '@', dopasowywany jest cały adres docelowy.\n" " \n" "

    Dopasowanie tylko do części lokalnej jest zaszłością i \n" " w przyszłych wersjach wzorzec będzie zawsze dopasowywany \n" " do całego adresu docelowego." #: Mailman/Gui/Privacy.py:432 msgid "Ceiling on acceptable number of recipients for a posting." msgstr "Limit ilości odbiorców wiadomości." #: Mailman/Gui/Privacy.py:434 msgid "" "If a posting has this number, or more, of recipients, it is\n" " held for admin approval. Use 0 for no ceiling." msgstr "" "Jeśli wiadomość ma taką lub większą ilość odbiorców, jest \n" " on wstrzymywany do decyzji administratora. \n" " Ustawienie limitu na 0, oznacza wyłączenie \n" " tej opcji." #: Mailman/Gui/Privacy.py:439 msgid "" "This section allows you to configure various anti-spam\n" " filters posting filters, which can help reduce the amount of " "spam\n" " your list members end up receiving.\n" " " msgstr "" "W tym miejscu można zdefiniować filtry,\n" " które mogą mogą pomóc Ci zmniejszyć ilość spamu\n" " przekazywanego przez listę." #: Mailman/Gui/Privacy.py:444 msgid "Header filters" msgstr "Filtry nagłowka" #: Mailman/Gui/Privacy.py:447 msgid "Filter rules to match against the headers of a message." msgstr "Reguły filtrowania, które będą dopasowywane do pól nagłówka." #: Mailman/Gui/Privacy.py:449 msgid "" "Each header filter rule has two parts, a list of regular\n" " expressions, one per line, and an action to take. Mailman\n" " matches the message's headers against every regular expression " "in\n" " the rule and if any match, the message is rejected, held, or\n" " discarded based on the action you specify. Use Defer " "to\n" " temporarily disable a rule.\n" "\n" " You can have more than one filter rule for your list. In that\n" " case, each rule is matched in turn, with processing stopped " "after\n" " the first match.\n" "\n" " Note that headers are collected from all the attachments\n" " (except for the mailman administrivia message) and\n" " matched against the regular expressions. With this feature,\n" " you can effectively sort out messages with dangerous file\n" " types or file name extensions." msgstr "" #: Mailman/Gui/Privacy.py:466 msgid "Legacy anti-spam filters" msgstr "Filtry antyspamowe" #: Mailman/Gui/Privacy.py:469 msgid "Hold posts with header value matching a specified regexp." msgstr "Wstrzymanie emaili po dopasowaniu pól nagłówka." #: Mailman/Gui/Privacy.py:470 msgid "" "Use this option to prohibit posts according to specific\n" " header values. The target value is a regular-expression for\n" " matching against the specified header. The match is done\n" " disregarding letter case. Lines beginning with '#' are " "ignored\n" " as comments.\n" "\n" "

    For example:

    to: .*@public.com
    says to hold all\n" " postings with a To: mail header containing '@public." "com'\n" " anywhere among the addresses.\n" "\n" "

    Note that leading whitespace is trimmed from the regexp. " "This\n" " can be circumvented in a number of ways, e.g. by escaping or\n" " bracketing it." msgstr "" "Użycie tej opcji pozwala na zablokowanie listów o \n" " określonych polach nagłówka. Duże/małe litery \n" " nie są uwzględniane. Linie rozpoczynające się od \n" " '#' są ignorowane.\n" "\n" "

    Przykład:

    to: .*@public.com
    oznacza, że \n" " zostaną wstrzymane wszystkie listy, którego pole nagłówka \n" " To: zawiera '@public.com'\n" "\n" "

    Uwaga! Białe znaki są usuwane z wyrażenia regularnego. \n" " Można tego uniknąć np. poprzez umieszczenie ich w \n" " nawiasach." #: Mailman/Gui/Privacy.py:505 msgid "" "dmarc_moderation_action must be >= the configured\n" " default value." msgstr "" #: Mailman/Gui/Privacy.py:555 msgid "" "Header filter rules require a pattern.\n" " Incomplete filter rules will be ignored." msgstr "" "Filtrowanie według pól nagłówka wymaga wzorców.\n" " Błędne reguły filtrowania zostaną zignorowane." #: Mailman/Gui/Privacy.py:563 msgid "" "The header filter rule pattern\n" " '%(safepattern)s' is not a legal regular expression. This\n" " rule will be ignored." msgstr "" "Podany wzorzec filtrowania nagłówka \n" " '%(safepattern)s' nie jest poprawnym wyrażeniem \n" " regularnym. Reguła ta zostanie zignorowana." #: Mailman/Gui/Topics.py:36 msgid "Topics" msgstr "Tematy" #: Mailman/Gui/Topics.py:44 msgid "List topic keywords" msgstr "Tematy na liście według słów kluczowych" #: Mailman/Gui/Topics.py:46 msgid "Disabled" msgstr "Wyłączone" #: Mailman/Gui/Topics.py:46 msgid "Enabled" msgstr "Włączone" #: Mailman/Gui/Topics.py:47 msgid "Should the topic filter be enabled or disabled?" msgstr "Czy filtrowanie tematyczne ma być włączone, czy wyłączone?" #: Mailman/Gui/Topics.py:49 msgid "" "The topic filter categorizes each incoming email message\n" " according to regular\n" " expression filters you specify below. If the message's\n" " Subject: or Keywords: header contains " "a\n" " match against a topic filter, the message is logically placed\n" " into a topic bucket. Each user can then choose to " "only\n" " receive messages from the mailing list for a particular topic\n" " bucket (or buckets). Any message not categorized in a topic\n" " bucket registered with the user is not delivered to the list.\n" "\n" "

    Note that this feature only works with regular delivery, " "not\n" " digest delivery.\n" "\n" "

    The body of the message can also be optionally scanned for\n" " Subject: and Keywords: headers, as\n" " specified by the topics_bodylines_limit\n" " configuration variable." msgstr "" "Filtr tematyczny dzieli wszystkie przychodzące wiadomości \n" " na kategorie według wyrażenia\n" " regularnego , które określisz. Jeżeli pola nagłówka\n" " Subject: lub Keywords: zostaną\n" " dopasowane do tego wyrażenia, wiadomość jest umieszczana\n" " w konkretnym wątku tematycznym. Każdy z użytkowników \n" " może wybrać, które tematy go interesują i otrzymywać tylko \n" " interesujące wiadomości. Wiadomość, która nie będzie pasowała \n" " do żadnego z tematów podanych przez użytkownika, nie \n" " zostanie dostarczona.\n" "\n" "

    Uwaga, ta opcja działa tylko w trybie \n" " dostarczania listów - nie działa z trybie paczek.\n" "\n" "

    Treść wiadomości może być również przeszukiwana \n" " pod kątem nagłówków Subject: i \n" " Keyword:, przeszukiwane jest tylko pierwszych \n" "topics_bodylines_limit\n" " linii." #: Mailman/Gui/Topics.py:70 msgid "How many body lines should the topic matcher scan?" msgstr "" "Ile linii z treści wiadomości będzie przeszukiwane w celu dopasowania filtru " "tematycznego?" #: Mailman/Gui/Topics.py:72 msgid "" "The topic matcher will scan this many lines of the message\n" " body looking for topic keyword matches. Body scanning stops " "when\n" " either this many lines have been looked at, or a non-header-" "like\n" " body line is encountered. By setting this value to zero, no " "body\n" " lines will be scanned (i.e. only the Keywords: " "and\n" " Subject: headers will be scanned). By setting " "this\n" " value to a negative number, then all body lines will be " "scanned\n" " until a non-header-like line is encountered.\n" " " msgstr "" "Dopasowywanie tematyczne powoduje przeszukanie określonej liczby linii " "wiadomości\n" "w celu dopasowania wzorców słów kluczowych. Przeszukiwanie zakończy się\n" "po określonej liczbie linii lub jeśli sprawdzana linia nie wygląda \n" "na wiersz nagłówka. Ustawienie tej zmiennej na zero spowoduje, że \n" "nie będzie przeszukiwana treść wiadomości, a tylko pola nagłówka. \n" "Ustawienie tej zmiennej na wartość ujemną spowoduje przeszukanie \n" "całej treści wiadomości do chwili wyszukania wiersza, który nie \n" "jest częścią nagłówka." #: Mailman/Gui/Topics.py:83 msgid "Topic keywords, one per line, to match against each message." msgstr "Słowa kluczowe tematu, jedno w każdej linii." #: Mailman/Gui/Topics.py:85 msgid "" "Each topic keyword is actually a regular expression, which is\n" " matched against certain parts of a mail message, specifically " "the\n" " Keywords: and Subject: message " "headers.\n" " Note that the first few lines of the body of the message can " "also\n" " contain a Keywords: and Subject:\n" " \"header\" on which matching is also performed." msgstr "" "Każde ze słów kluczowych tematu jest wyrażeniem regularnym, \n" "które dopasowywane jest do określonych części wiadomości. Przeszukiwane \n" "są pola nagłówka Keywords: i Subject:.\n" "Warto pamiętać, że pierwsze kilka linii wiadomości \n" "może zawierać Keywords: i Subject:." #: Mailman/Gui/Topics.py:123 msgid "" "Topic specifications require both a name and\n" " a pattern. Incomplete topics will be ignored." msgstr "" "Definicja dopasowania tematycznego musi zawierać jego nazwę \n" " i wzorzec. Niekompletne tematy będą zignorowane." #: Mailman/Gui/Topics.py:133 msgid "" "The topic pattern '%(safepattern)s' is not a\n" " legal regular expression. It will be discarded." msgstr "" "Wzorzec tematu ''%(safepattern)s' nie jest poprawnym \n" " wyrażeniem regularnym. Zostanie on zignorowany." #: Mailman/Gui/Usenet.py:25 msgid "Mail<->News gateways" msgstr "Bramka Mail<->Niusy" #: Mailman/Gui/Usenet.py:35 msgid "Mail-to-News and News-to-Mail gateway services." msgstr "Obustronna bramka do sieci USENET (niusy)" #: Mailman/Gui/Usenet.py:37 msgid "News server settings" msgstr "Ustawienia serwera NNTP" #: Mailman/Gui/Usenet.py:40 msgid "The hostname of the machine your news server is running on." msgstr "Internetowy adres Twojego serwera NNTP." #: Mailman/Gui/Usenet.py:41 msgid "" "This value may be either the name of your news server, or\n" " optionally of the format name:port, where port is a port " "number.\n" "\n" " The news server is not part of Mailman proper. You have to\n" " already have access to an NNTP server, and that NNTP server " "must\n" " recognize the machine this mailing list runs on as a machine\n" " capable of reading and posting news." msgstr "" "Wartość w tym polu może być nazwą serwera NNTP lub \n" " w formacie nazwa:port, gdzie port jest numerem portu.\n" "\n" "Serwer News nie jest częścią programu Mailman. Musisz mieć dostęp\n" "do działającego serwera NNTP. Wymagana jest możliwość czytania i \n" "wysyłania postów do serwera." #: Mailman/Gui/Usenet.py:50 msgid "The name of the Usenet group to gateway to and/or from." msgstr "Nazwa grupy dyskusyjnej, do której jest ta bramka." #: Mailman/Gui/Usenet.py:53 msgid "" "Should new posts to the mailing list be sent to the\n" " newsgroup?" msgstr "" "Czy nowe wiadomości wysyłane na listę mają być przekazywane\n" "do grupy news?" #: Mailman/Gui/Usenet.py:57 msgid "" "Should new posts to the newsgroup be sent to the mailing\n" " list?" msgstr "" "Czy nowe posty pojawiające się na grupie mają być przekazywane\n" "na listę?" #: Mailman/Gui/Usenet.py:60 msgid "Forwarding options" msgstr "Opcje przekazywania" #: Mailman/Gui/Usenet.py:63 msgid "Moderated" msgstr "Moderowane" #: Mailman/Gui/Usenet.py:63 msgid "Open list, moderated group" msgstr "Lista otwarta, grupa moderowana" #: Mailman/Gui/Usenet.py:66 msgid "The moderation policy of the newsgroup." msgstr "Typ moderowania grupy dyskusyjnej." #: Mailman/Gui/Usenet.py:68 msgid "" "This setting determines the moderation policy of the\n" " newsgroup and its interaction with the moderation policy of " "the\n" " mailing list. This only applies to the newsgroup that you are\n" " gatewaying to, so if you are only gatewaying from\n" " Usenet, or the newsgroup you are gatewaying to is not " "moderated,\n" " set this option to None.\n" "\n" "

    If the newsgroup is moderated, you can set this mailing " "list\n" " up to be the moderation address for the newsgroup. By " "selecting\n" " Moderated, an additional posting hold will be placed " "in\n" " the approval process. All messages posted to the mailing list\n" " will have to be approved before being sent on to the " "newsgroup,\n" " or to the mailing list membership.\n" "\n" "

    Note that if the message has an Approved " "header\n" " with the list's administrative password in it, this hold test\n" " will be bypassed, allowing privileged posters to send messages\n" " directly to the list and the newsgroup.\n" "\n" "

    Finally, if the newsgroup is moderated, but you want to " "have\n" " an open posting policy anyway, you should select Open " "list,\n" " moderated group. The effect of this is to use the normal\n" " Mailman moderation facilities, but to add an Approved\n" " header to all messages that are gatewayed to Usenet." msgstr "" #: Mailman/Gui/Usenet.py:94 msgid "Prefix Subject: headers on postings gated to news?" msgstr "" "Czy dodawać przedrostek do tematów wiadomości przekazywanych do serwera news?" #: Mailman/Gui/Usenet.py:95 msgid "" "Mailman prefixes Subject: headers with\n" " text you can\n" " customize and normally, this prefix shows up in messages\n" " gatewayed to Usenet. You can set this option to No " "to\n" " disable the prefix on gated messages. Of course, if you turn " "off\n" " normal Subject: prefixes, they won't be prefixed for\n" " gated messages either." msgstr "" #: Mailman/Gui/Usenet.py:103 msgid "Mass catch up" msgstr "Przechwycenie grupy" #: Mailman/Gui/Usenet.py:106 msgid "Should Mailman perform a catchup on the newsgroup?" msgstr "Czy Mailman ma zignorować starsze wiadomości na grupie news?" #: Mailman/Gui/Usenet.py:107 msgid "" "When you tell Mailman to perform a catchup on the newsgroup,\n" " this means that you want to start gating messages to the " "mailing\n" " list with the next new message found. All earlier messages on\n" " the newsgroup will be ignored. This is as if you were reading\n" " the newsgroup yourself, and you marked all current messages as\n" " read. By catching up, your mailing list members will\n" " not see any of the earlier messages." msgstr "" "Jeśli każesz Mailmanowi zignorować starsze wiadomości, oznacza to, że\n" "przechwytywanie postów na listę obowiązywać będzie tylko dla nowych \n" "wiadomości. Wszystkie wiadomości wysłane przed uruchomieniem bramki " "zostaną \n" "zignorowane. Można to porównać do zaznaczenia wszystkich wiadomości \n" "jako przeczytanych w programie do czytania wiadomości z serwera Usenetu." #: Mailman/Gui/Usenet.py:121 msgid "Mass catchup completed" msgstr "Przechwytywanie grupy zakończone" #: Mailman/Gui/Usenet.py:133 msgid "" "You cannot enable gatewaying unless both the\n" " news server field " "and\n" " the linked\n" " newsgroup fields are filled in." msgstr "" "Włącznie bramki do Usenetu jest możliwe tylko, jeśli oba pola \n" " nazwa serwera NNTP\n" " i nazwa grupy dyskusyjnej\n" " są wypełnione." #: Mailman/HTMLFormatter.py:48 msgid "%(listinfo_link)s list run by %(owner_link)s" msgstr "Listą %(listinfo_link)s opiekuje się %(owner_link)s" #: Mailman/HTMLFormatter.py:56 msgid "%(realname)s administrative interface" msgstr "Interfejs administracyjny listy %(realname)s" #: Mailman/HTMLFormatter.py:57 msgid " (requires authorization)" msgstr " (wymagane uwierzytelnienie)" #: Mailman/HTMLFormatter.py:60 msgid "Overview of all %(hostname)s mailing lists" msgstr "Przegląd wszystkich list na %(hostname)s" #: Mailman/HTMLFormatter.py:77 msgid "(1 private member not shown)" msgstr "(1 prywatny adres ukryty)" #: Mailman/HTMLFormatter.py:79 msgid "(%(num_concealed)d private members not shown)" msgstr "Liczba adresów ukrytych: (%(num_concealed)d)" #: Mailman/HTMLFormatter.py:135 msgid "; it was disabled by you" msgstr "; wyłączone przez Ciebie" #: Mailman/HTMLFormatter.py:137 msgid "; it was disabled by the list administrator" msgstr "; wyłączone przez administratora listy" #: Mailman/HTMLFormatter.py:141 msgid "" "; it was disabled due to excessive bounces. The\n" " last bounce was received on %(date)s" msgstr "" "; wyłączone z powodu wielu zwrotów. Ostatni\n" " zwrot otrzymano %(date)s" #: Mailman/HTMLFormatter.py:144 msgid "; it was disabled for unknown reasons" msgstr "; zostało wyłączone z nieznanych powodów" #: Mailman/HTMLFormatter.py:146 msgid "Note: your list delivery is currently disabled%(reason)s." msgstr "Uwaga: Dostarczanie listów jest w tym momencie wyłączone%(reason)s." #: Mailman/HTMLFormatter.py:149 msgid "Mail delivery" msgstr "Dostarczanie wiadomości" #: Mailman/HTMLFormatter.py:151 Mailman/HTMLFormatter.py:296 msgid "the list administrator" msgstr "administrator listy" #: Mailman/HTMLFormatter.py:152 msgid "" "

    %(note)s\n" "\n" "

    You may have disabled list delivery intentionally,\n" " or it may have been triggered by bounces from your email\n" " address. In either case, to re-enable delivery, change the\n" " %(link)s option below. Contact %(mailto)s if you have any\n" " questions or need assistance." msgstr "" "

    %(note)s\n" "\n" "

    Dostarczanie wiadomości zostało wyłączone celowo, lub na skutek \n" "zbyt wielu zwrotów z adresu. W obu przypadkach ponowne uaktywnienie \n" "może być wykonane przy pomocy %(link)s poniższej opcji. Pytanie lub \n" "wątpliwości proszę kierować na adres %(mailto)s." #: Mailman/HTMLFormatter.py:164 msgid "" "

    We have received some recent bounces from your\n" " address. Your current bounce score is %(score)s out of " "a\n" " maximum of %(total)s. Please double check that your subscribed\n" " address is correct and that there are no problems with delivery " "to\n" " this address. Your bounce score will be automatically reset if\n" " the problems are corrected soon." msgstr "" "

    Otrzymano kilka zwrotów z Twojego adresu. W tej chwili współczynnik \n" "zwrotów wynosi %(score)s (maksymalna dopuszczalna wartość to %(total)" "s).\n" "Proszę sprawdzić, czy adres jest poprawny i czy nie ma problemów z " "dostarczaniem wiadomości\n" "na ten adres. Współczynnik zwrotów zostanie automatycznie wyzerowany, " "jeśli \n" "problem szybko zniknie." #: Mailman/HTMLFormatter.py:176 msgid "" "(Note - you are subscribing to a list of mailing lists, so the %(type)s " "notice will be sent to the admin address for your membership, %(addr)s.)

    " msgstr "" "(Uwaga - zapisujesz się na listę list, a więc powiadomienie %(type)s " "zostanie wysłane na adres opiekuna listy - %(addr)s.)

    " #: Mailman/HTMLFormatter.py:186 msgid "" "You will be sent email requesting confirmation, to\n" " prevent others from gratuitously subscribing you." msgstr "" "Aby zapobiec fałszywym zgłoszeniom, otrzymasz email \n" " z prośbą o potwierdzenie prenumeraty." #: Mailman/HTMLFormatter.py:189 msgid "" "This is a closed list, which means your subscription\n" " will be held for approval. You will be notified of the list\n" " moderator's decision by email." msgstr "" "Ta lista jest listą zamkniętą, co oznacza, że każda prośba\n" " o zapisanie się musi być zatwierdzona. Dostaniesz\n" " email informujący o decyzji moderatora." #: Mailman/HTMLFormatter.py:192 Mailman/HTMLFormatter.py:199 msgid "also " msgstr "również " #: Mailman/HTMLFormatter.py:194 msgid "" "You will be sent email requesting confirmation, to\n" " prevent others from gratuitously subscribing you. Once\n" " confirmation is received, your request will be held for " "approval\n" " by the list moderator. You will be notified of the moderator's\n" " decision by email." msgstr "" "Sprawdź pocztę, by potwierdzić prenumeratę. \n" " Po otrzymaniu \n" " potwierdzenia, prośba zostanie przekazana \n" " do decyzji moderatora. O jego decyzji system powiadomi Cię \n" " automatycznie." #: Mailman/HTMLFormatter.py:203 msgid "" "This is %(also)sa private list, which means that the\n" " list of members is not available to non-members." msgstr "" "Lista jest %(also)s listą prywatną, co oznacza, że nie masz prawa\n" " wyświetlić adresów jej prenumeratorów." #: Mailman/HTMLFormatter.py:206 msgid "" "This is %(also)sa hidden list, which means that the\n" " list of members is available only to the list administrator." msgstr "" "Lista jest %(also)slistą ukrytą, co oznacza, że \n" " lista jej członków jest dostępna tylko dla administratora." #: Mailman/HTMLFormatter.py:209 msgid "" "This is %(also)sa public list, which means that the\n" " list of members list is available to everyone." msgstr "" "Lista jest %(also)s listą publiczną, co oznacza, że \n" " lista jej członków jest dostępna dla wszystkich." #: Mailman/HTMLFormatter.py:212 msgid "" " (but we obscure the addresses so they are not\n" " easily recognizable by spammers)." msgstr "" " (ale adresy są zniekształcane w taki sposób, że \n" " nie są, w łatwy sposób, rozpoznawalne przez spamerów)." #: Mailman/HTMLFormatter.py:217 msgid "" "

    (Note that this is an umbrella list, intended to\n" " have only other mailing lists as members. Among other things,\n" " this means that your confirmation request will be sent to the\n" " `%(sfx)s' account for your address.)" msgstr "" "

    (Pamiętaj, że jest to lista parasolowa, której subskrybentami\n" " powinny być tylko inne listy. Oznacza to, między \n" " innymi, że prośby o potwierdzenie będą wysyłane na konto \n" " %(sfx)s'.)" #: Mailman/HTMLFormatter.py:246 msgid "either " msgstr "albo " #: Mailman/HTMLFormatter.py:251 msgid "" "To unsubscribe from %(realname)s, get a password reminder,\n" " or change your subscription options %(either)senter your " "subscription\n" " email address:\n" "

    " msgstr "" "Podaj swój adres, żeby wypisać się z listy %(realname)s, \n" " poprosić o przypomnienie hasła, %(either)s zmienić parametry " "prenumeraty:\n" "

    " #: Mailman/HTMLFormatter.py:258 msgid "Unsubscribe or edit options" msgstr "Wypisz się lub zmień opcje prenumeraty" #: Mailman/HTMLFormatter.py:262 msgid "" "

    ... or select your entry from\n" " the subscribers list (see above)." msgstr "" "

    ... lub wybierz swój adres na liście \n" " prenumeratorów (patrz wyżej)." #: Mailman/HTMLFormatter.py:264 msgid "" " If you leave the field blank, you will be prompted for\n" " your email address" msgstr "" " Jeśli zostawisz to pole puste, adres email będziesz musiał \n" " podać później." #: Mailman/HTMLFormatter.py:272 msgid "" "(%(which)s is only available to the list\n" " members.)" msgstr "" "(%(which)s jest dostępne tylko dla prenumeratorów\n" " listy.)" #: Mailman/HTMLFormatter.py:276 msgid "" "(%(which)s is only available to the list\n" " administrator.)" msgstr "" "(%(which)s jest dostępne tylko dla \n" " administratora listy.)" #: Mailman/HTMLFormatter.py:286 msgid "Click here for the list of " msgstr "Kliknij tutaj, żeby wyświetlić listę " #: Mailman/HTMLFormatter.py:288 msgid " subscribers: " msgstr " prenumeratorów: " #: Mailman/HTMLFormatter.py:290 msgid "Visit Subscriber list" msgstr "Zobacz listę prenumeratorów" #: Mailman/HTMLFormatter.py:293 msgid "members" msgstr "prenumeratorzy" #: Mailman/HTMLFormatter.py:294 msgid "Address:" msgstr "Adres:" #: Mailman/HTMLFormatter.py:297 msgid "Admin address:" msgstr "Adres administratora:" #: Mailman/HTMLFormatter.py:300 msgid "The subscribers list" msgstr "Lista prenumeratorów" #: Mailman/HTMLFormatter.py:302 msgid "

    Enter your " msgstr "

    Wprowadź swój " #: Mailman/HTMLFormatter.py:304 msgid " and password to visit the subscribers list:

    " msgstr " i hasło, żeby zobaczyć listę osób zapisanych:

    " #: Mailman/HTMLFormatter.py:309 msgid "Password: " msgstr "Hasło: " #: Mailman/HTMLFormatter.py:313 msgid "Visit Subscriber List" msgstr "Zobacz listę prenumeratorów" #: Mailman/HTMLFormatter.py:347 msgid "Once a month, your password will be emailed to you as a reminder." msgstr "Raz w miesiącu będziesz otrzymywał email z hasłem." #: Mailman/HTMLFormatter.py:394 msgid "The current archive" msgstr "Bieżące archiwum" #: Mailman/Handlers/Acknowledge.py:59 msgid "%(realname)s post acknowledgement" msgstr "%(realname)s potwierdzenie wiadomości" #: Mailman/Handlers/Approve.py:45 msgid "" "Message rejected.\n" "It appears that this message contains an HTML part with the\n" "Approved: password line, but due to the way it is coded in the\n" "HTML it can't be safely removed.\n" msgstr "" #: Mailman/Handlers/CalcRecips.py:78 msgid "" "Your urgent message to the %(realname)s mailing list was not authorized for\n" "delivery. The original message as received by Mailman is attached.\n" msgstr "" "Nie masz wystarczających uprawnień, żeby wysyłać pilną wiadomość na listę \n" "%(realname)s. W załączniku znajdziesz swój email.\n" #: Mailman/Handlers/Emergency.py:29 msgid "Emergency hold on all list traffic is in effect" msgstr "Uruchomione zostało awaryjne moderowanie listy" #: Mailman/Handlers/Emergency.py:30 Mailman/Handlers/Hold.py:58 msgid "Your message was deemed inappropriate by the moderator." msgstr "Moderator uznał wiadomość za niepożądaną." #: Mailman/Handlers/Hold.py:53 msgid "Sender is explicitly forbidden" msgstr "Adres nadawcy został zablokowany" #: Mailman/Handlers/Hold.py:54 msgid "You are forbidden from posting messages to this list." msgstr "" "Administrator zablokował możliwość wysłania przez Ciebie wiadomości na tę " "listę." #: Mailman/Handlers/Hold.py:57 msgid "Post to moderated list" msgstr "Wiadomość wysłana na listę moderowaną" #: Mailman/Handlers/Hold.py:61 msgid "Post by non-member to a members-only list" msgstr "Wiadomość wysłana przez osobę spoza zamkniętej listy" #: Mailman/Handlers/Hold.py:62 msgid "Non-members are not allowed to post messages to this list." msgstr "Tylko członkowie listy mogą wysyłać na nią wiadomości" #: Mailman/Handlers/Hold.py:65 msgid "Posting to a restricted list by sender requires approval" msgstr "Wysłanie wiadomości na listę z ograniczeniami wymaga akceptacji" #: Mailman/Handlers/Hold.py:66 msgid "This list is restricted; your message was not approved." msgstr "Ta lista ma ograniczenia. Twoja wiadomość nie została zaakceptowana." #: Mailman/Handlers/Hold.py:69 msgid "Too many recipients to the message" msgstr "Wiadomość ma zbyt wielu adresatów" #: Mailman/Handlers/Hold.py:70 msgid "Please trim the recipient list; it is too long." msgstr "Proszę zmiejszyć listę odbiorców tej wiadomości - jest za długa." #: Mailman/Handlers/Hold.py:73 msgid "Message has implicit destination" msgstr "Wiadomość jest niepoprawnie zaadresowana" #: Mailman/Handlers/Hold.py:74 msgid "" "Blind carbon copies or other implicit destinations are\n" "not allowed. Try reposting your message by explicitly including the list\n" "address in the To: or Cc: fields." msgstr "" "Bcc: lub inne pośrednie adresowanie listy nie jest dozwolone.\n" "Wyślij wiadomość ponownie, umieszczając adres listy w polach\n" "Do lub Kopia" #: Mailman/Handlers/Hold.py:79 msgid "Message may contain administrivia" msgstr "Wiadomość może zawierać polecenia administracyjne" #: Mailman/Handlers/Hold.py:84 msgid "" "Please do *not* post administrative requests to the mailing\n" "list. If you wish to subscribe, visit %(listurl)s or send a message with " "the\n" "word `help' in it to the request address, %(request)s, for further\n" "instructions." msgstr "" "Proszę *nie* wysyłać poleceń administracyjnych na adres listy.\n" "Jeśli chcesz się zapisać, odwiedź strone %(listurl)s albo wyślij \n" "wiadomość ze słowem 'help' na adres %(request)s. Tam znajdziesz \n" "kolejne wskazówki." #: Mailman/Handlers/Hold.py:90 msgid "Message has a suspicious header" msgstr "Nagłowek wiadomości jest niepoprawny" #: Mailman/Handlers/Hold.py:91 msgid "Your message had a suspicious header." msgstr "Nagłowek Twojej wiadomości jest niepoprawny" #: Mailman/Handlers/Hold.py:101 msgid "" "Message body is too big: %(size)d bytes with a limit of\n" "%(limit)d KB" msgstr "Wiadomość zbyt duża: %(size)d bajtów przy limicie %(limit)d kB" #: Mailman/Handlers/Hold.py:106 msgid "" "Your message was too big; please trim it to less than\n" "%(kb)d KB in size." msgstr "Wiadomość jest zbyt duża. Proszę ją zmniejszyć do %(kb)d kB" #: Mailman/Handlers/Hold.py:110 msgid "Posting to a moderated newsgroup" msgstr "Wiadomość wysłana na grupę moderowaną" #: Mailman/Handlers/Hold.py:247 msgid "Your message to %(listname)s awaits moderator approval" msgstr "Wiadomość wysłana na listę %(listname)s czeka na akceptację" #: Mailman/Handlers/Hold.py:266 msgid "%(listname)s post from %(sender)s requires approval" msgstr "Wiadomość na %(listname)s od %(sender)s czeka na akceptację" #: Mailman/Handlers/Hold.py:273 msgid "" "If you reply to this message, keeping the Subject: header intact, Mailman " "will\n" "discard the held message. Do this if the message is spam. If you reply to\n" "this message and include an Approved: header with the list password in it, " "the\n" "message will be approved for posting to the list. The Approved: header can\n" "also appear in the first line of the body of the reply." msgstr "" "Jeśli odpowiesz na tę wiadomość nie zmieniając jej tematu (pola Subject), \n" "Mailman zignoruje wstrzymaną wiadomość. Jest to prawidłowe działanie w \n" "przypadku spamu. \n" "Jeśli odpowiedź będzie zawierała pole nagłówka Approved: i hasło listy, \n" "wstrzymana wiadomość zostanie przesłana do wszystkich subskrybentów. \n" "Nagłówek Approved: może się również pojawić w pierwszej linii \n" "odpowiedzi." #: Mailman/Handlers/MimeDel.py:59 msgid "The message's content type was explicitly disallowed" msgstr "Tego typu wiadomości zostały bezpośrednio zablokowane" #: Mailman/Handlers/MimeDel.py:64 msgid "The message's content type was not explicitly allowed" msgstr "Niedozwolony typ wiadomości" #: Mailman/Handlers/MimeDel.py:72 msgid "The message's file extension was explicitly disallowed" msgstr "Typ wiadomości został bezpośrednio zablokowany" #: Mailman/Handlers/MimeDel.py:75 msgid "The message's file extension was not explicitly allowed" msgstr "Nie można wysyłać tego rodzaju pliku na listę" #: Mailman/Handlers/MimeDel.py:87 msgid "After content filtering, the message was empty" msgstr "Po przefiltrowaniu treści, wiadomość została pusta" #: Mailman/Handlers/MimeDel.py:264 msgid "" "The attached message matched the %(listname)s mailing list's content " "filtering\n" "rules and was prevented from being forwarded on to the list membership. " "You\n" "are receiving the only remaining copy of the discarded message.\n" "\n" msgstr "" "Wiadomość z załącznika została usunięta przez algorytm filtrowania \n" "treści dla listy %(listname)s. \n" "Nie zostanie ona przekazana innym subskrybentom.\n" "Otrzymałeś jedyną kopię zignorowanej wiadomości.\n" #: Mailman/Handlers/MimeDel.py:270 msgid "Content filtered message notification" msgstr "Powiadomienie o filtrowaniu treści" #: Mailman/Handlers/Moderate.py:70 #, fuzzy msgid "" "You are not allowed to post to this mailing list From: a domain which\n" "publishes a DMARC policy of reject or quarantine, and your message has been\n" "automatically rejected. If you think that your messages are being rejected " "in\n" "error, contact the mailing list owner at %(listowner)s." msgstr "" "Nie masz uprawnień pozwalających na wysyłanie wiadomości na tę listę \n" "Twoje wiadomości są automatycznie odrzucane. \n" "Skontaktuj się z opiekunen \n" "listy pod adresem %(listowner)s." #: Mailman/Handlers/Moderate.py:189 msgid "" "You are not allowed to post to this mailing list, and your message has been\n" "automatically rejected. If you think that your messages are being rejected " "in\n" "error, contact the mailing list owner at %(listowner)s." msgstr "" "Nie masz uprawnień pozwalających na wysyłanie wiadomości na tę listę \n" "Twoje wiadomości są automatycznie odrzucane. \n" "Skontaktuj się z opiekunen \n" "listy pod adresem %(listowner)s." #: Mailman/Handlers/Moderate.py:205 msgid "Auto-discard notification" msgstr "Powiadomienie o odrzuceniu" #: Mailman/Handlers/Moderate.py:208 msgid "The attached message has been automatically discarded." msgstr "Wiadomość z załącznika została automatycznie odrzucona." #: Mailman/Handlers/Replybot.py:75 msgid "Auto-response for your message to the \"%(realname)s\" mailing list" msgstr "Automatyczna odpowiedź z listy \"%(realname)s\" " #: Mailman/Handlers/Replybot.py:108 msgid "The Mailman Replybot" msgstr "Automat Mailman" #: Mailman/Handlers/Scrubber.py:205 #, fuzzy msgid "" "An embedded and charset-unspecified text was scrubbed...\n" "Name: %(filename)s\n" "URL: %(url)s\n" msgstr "" "Błędnie zakodowany tekst został usunięty...\n" "Plik: %(filename)s\n" "Url: %(url)s\n" #: Mailman/Handlers/Scrubber.py:215 msgid "HTML attachment scrubbed and removed" msgstr "Załącznik HTML został usunięty" #: Mailman/Handlers/Scrubber.py:231 Mailman/Handlers/Scrubber.py:256 msgid "" "An HTML attachment was scrubbed...\n" "URL: %(url)s\n" msgstr "" "Załącznik HTML został usunięty...\n" "URL: %(url)s\n" #: Mailman/Handlers/Scrubber.py:268 msgid "no subject" msgstr "brak tematu" #: Mailman/Handlers/Scrubber.py:270 msgid "no date" msgstr "brak daty" #: Mailman/Handlers/Scrubber.py:271 msgid "unknown sender" msgstr "nieznany nadawca" #: Mailman/Handlers/Scrubber.py:273 #, fuzzy msgid "" "An embedded message was scrubbed...\n" "From: %(who)s\n" "Subject: %(subject)s\n" "Date: %(date)s\n" "Size: %(size)s\n" "URL: %(url)s\n" msgstr "" "Załączona wiadomość została usunięta...\n" "From: %(who)s\n" "Subject: %(subject)s\n" "Date: %(date)s\n" "Size: %(size)s\n" "Url: %(url)s\n" #: Mailman/Handlers/Scrubber.py:305 #, fuzzy msgid "" "A non-text attachment was scrubbed...\n" "Name: %(filename)s\n" "Type: %(ctype)s\n" "Size: %(size)d bytes\n" "Desc: %(desc)s\n" "URL: %(url)s\n" msgstr "" "Załącznik wiadomości został usunięty...\n" "Name: %(filename)s\n" "Type: %(ctype)s\n" "Size: %(size)d bytes\n" "Desc: %(desc)s\n" "Url : %(url)s\n" #: Mailman/Handlers/Scrubber.py:344 msgid "Skipped content of type %(partctype)s\n" msgstr "Pominięto zawartość typu %(partctype)s\n" #: Mailman/Handlers/Scrubber.py:385 msgid "-------------- next part --------------\n" msgstr "-------------- następna część ---------\n" #: Mailman/Handlers/SpamDetect.py:56 msgid "The message headers matched a filter rule" msgstr "Nagłówek wiadomości pasuje do reguł filtra" #: Mailman/Handlers/SpamDetect.py:123 msgid "Message rejected by filter rule match" msgstr "Wiadomość odrzucona przez filtr" #: Mailman/Handlers/ToDigest.py:163 msgid "%(realname)s Digest, Vol %(volume)d, Issue %(issue)d" msgstr "Paczka %(realname)s, Tom %(volume)d, Numer %(issue)d" #: Mailman/Handlers/ToDigest.py:209 msgid "digest header" msgstr "nagłówek paczki" #: Mailman/Handlers/ToDigest.py:212 msgid "Digest Header" msgstr "Nagłówek paczki" #: Mailman/Handlers/ToDigest.py:225 msgid "Today's Topics:\n" msgstr "Dzisiejsze tematy:\n" #: Mailman/Handlers/ToDigest.py:305 msgid "Today's Topics (%(msgcount)d messages)" msgstr "Dzisiejsze tematy (%(msgcount)d wiadomości)" #: Mailman/Handlers/ToDigest.py:331 msgid "[Message discarded by content filter]" msgstr "[Wiadomość skasowana przez filtr treści]" #: Mailman/Handlers/ToDigest.py:359 msgid "digest footer" msgstr "stopka paczki" #: Mailman/Handlers/ToDigest.py:362 Mailman/Handlers/ToDigest.py:370 msgid "Digest Footer" msgstr "Stopka Paczki" #: Mailman/Handlers/ToDigest.py:377 msgid "End of " msgstr "Koniec " #: Mailman/ListAdmin.py:307 msgid "Posting of your message titled \"%(subject)s\"" msgstr "Twoja wiadomość o tytule \"%(subject)s\"" #: Mailman/ListAdmin.py:308 Mailman/ListAdmin.py:430 msgid "[No reason given]" msgstr "[Nie podano powodu]" #: Mailman/ListAdmin.py:346 msgid "Forward of moderated message" msgstr "Przekazywanie wiadomości moderowanej" #: Mailman/ListAdmin.py:403 msgid "New subscription request to list %(realname)s from %(addr)s" msgstr "Nowa prośba o zapisanie na listę %(realname)s od %(addr)s" #: Mailman/ListAdmin.py:429 msgid "Subscription request" msgstr "Prośba o zapisanie" #: Mailman/ListAdmin.py:460 msgid "New unsubscription request from %(realname)s by %(addr)s" msgstr "Nowa prośba wypisania z listy %(realname)s od %(addr)s" #: Mailman/ListAdmin.py:484 msgid "Unsubscription request" msgstr "Prośba o wypisanie" #: Mailman/ListAdmin.py:517 msgid "Original Message" msgstr "Wiadomość oryginalna" #: Mailman/ListAdmin.py:520 msgid "Request to mailing list %(realname)s rejected" msgstr "Odrzucona prośba wysłana na listę %(realname)s" #: Mailman/MTA/Manual.py:66 msgid "" "The mailing list `%(listname)s' has been created via the through-the-web\n" "interface. In order to complete the activation of this mailing list, the\n" "proper /etc/aliases (or equivalent) file must be updated. The program\n" "`newaliases' may also have to be run.\n" "\n" "Here are the entries for the /etc/aliases file:\n" msgstr "" "Lista '%(listname)s' została utworzona za pomocą interfejsu www.\n" "W celu pełnej obsługi listy konieczna jest jeszcze edycja pliku \n" "/etc/aliases (lub odpowiednika). Możliwe, że konieczne będzie również \n" "uruchomienie programu 'newaliases'.\n" "\n" "Do pliku /etc/aliases należy dodać następujące linie:\n" #: Mailman/MTA/Manual.py:77 msgid "" "To finish creating your mailing list, you must edit your /etc/aliases (or\n" "equivalent) file by adding the following lines, and possibly running the\n" "`newaliases' program:\n" msgstr "" "Aby zakończyć proces tworzenia listy, konieczne będzie dodanie \n" "poniższych linii do pliku /etc/aliases (lub odpowiednika), oraz odświeżyć \n" "bazę aliasów poleceniem 'newaliases':\n" #: Mailman/MTA/Manual.py:82 msgid "## %(listname)s mailing list" msgstr "## Lista %(listname)s" #: Mailman/MTA/Manual.py:99 msgid "Mailing list creation request for list %(listname)s" msgstr "Prośba o utworzenie listy %(listname)s" #: Mailman/MTA/Manual.py:113 msgid "" "The mailing list `%(listname)s' has been removed via the through-the-web\n" "interface. In order to complete the de-activation of this mailing list, " "the\n" "appropriate /etc/aliases (or equivalent) file must be updated. The program\n" "`newaliases' may also have to be run.\n" "\n" "Here are the entries in the /etc/aliases file that should be removed:\n" msgstr "" "Lista '%(listname)s' została usunięta przez interfejs www.\n" "W celu całkowitego usunięcia listy konieczna jest jeszcze edycja pliku \n" "/etc/aliases (lub odpowiednika). Możliwe, że konieczne będzie również \n" "uruchomienie programu 'newaliases'.\n" "\n" "W pliku /etc/aliases należy skasować następujące linie:\n" #: Mailman/MTA/Manual.py:123 msgid "" "\n" "To finish removing your mailing list, you must edit your /etc/aliases (or\n" "equivalent) file by removing the following lines, and possibly running the\n" "`newaliases' program:\n" "\n" "## %(listname)s mailing list" msgstr "" "\n" "W celu całkowitego usunięcia listy, należy skasować poniższe \n" "linie z pliku /etc/aliases (lub odpowiednika). Konieczne może być\n" "również uruchomienie programu 'newaliases':\n" "\n" "## Lista %(listname)s" #: Mailman/MTA/Manual.py:142 msgid "Mailing list removal request for list %(listname)s" msgstr "Prośba o usunięcie listy %(listname)s" #: Mailman/MTA/Postfix.py:324 msgid "checking permissions on %(file)s" msgstr "kontrola praw dostępu do pliku %(file)s" #: Mailman/MTA/Postfix.py:334 msgid "%(file)s permissions must be 066x (got %(octmode)s)" msgstr "" "prawa dostępu do pliku %(file)s powinny być ustawione na 066x (są %(octmode)" "s)" #: Mailman/MTA/Postfix.py:336 Mailman/MTA/Postfix.py:363 #: Mailman/MTA/Postfix.py:374 bin/check_perms:125 bin/check_perms:153 #: bin/check_perms:163 bin/check_perms:174 bin/check_perms:199 #: bin/check_perms:216 bin/check_perms:242 bin/check_perms:265 #: bin/check_perms:284 bin/check_perms:298 bin/check_perms:318 #: bin/check_perms:358 msgid "(fixing)" msgstr "(poprawione)" #: Mailman/MTA/Postfix.py:352 msgid "checking ownership of %(dbfile)s" msgstr "kontrola właściciela pliku %(dbfile)s" #: Mailman/MTA/Postfix.py:360 msgid "%(dbfile)s owned by %(owner)s (must be owned by %(user)s" msgstr "%(owner)s jest właścicielem pliku %(dbfile)s (a musi być %(user)s)" #: Mailman/MTA/Postfix.py:372 #, fuzzy msgid "%(dbfile)s permissions must be 066x (got %(octmode)s)" msgstr "" "prawa dostępu do pliku %(dbfile)s powinny być ustawione na 066x (są " "%(octmode)s)" #: Mailman/MailList.py:216 msgid "Your confirmation is required to join the %(listname)s mailing list" msgstr "Prosimy o potwierdzenie prenumeraty listy %(listname)s" #: Mailman/MailList.py:227 msgid "Your confirmation is required to leave the %(listname)s mailing list" msgstr "Prosimy o potwierdzenie wypisania się z listy %(listname)s" #: Mailman/MailList.py:908 Mailman/MailList.py:1339 msgid " from %(remote)s" msgstr " z adresu %(remote)s" #: Mailman/MailList.py:949 msgid "subscriptions to %(realname)s require moderator approval" msgstr "prenumerata listy %(realname)s wymaga zgody administratora" #: Mailman/MailList.py:1018 bin/add_members:252 msgid "%(realname)s subscription notification" msgstr "Powiadomienie o prenumeracie %(realname)s" #: Mailman/MailList.py:1037 msgid "unsubscriptions require moderator approval" msgstr "wypisanie się wymaga zgody administratora" #: Mailman/MailList.py:1058 msgid "%(realname)s unsubscribe notification" msgstr "Powiadomienie o wypisaniu się %(realname)s" #: Mailman/MailList.py:1248 msgid "subscriptions to %(name)s require administrator approval" msgstr "%(name)s prosi o zatwierdzenie jego subskrypcji" #: Mailman/MailList.py:1513 msgid "Last autoresponse notification for today" msgstr "Dzisiaj nie otrzymasz już kolejnych automatycznych wiadomości" #: Mailman/Queue/BounceRunner.py:343 msgid "" "The attached message was received as a bounce, but either the bounce format\n" "was not recognized, or no member addresses could be extracted from it. " "This\n" "mailing list has been configured to send all unrecognized bounce messages " "to\n" "the list administrator(s).\n" "\n" "For more information see:\n" "%(adminurl)s\n" "\n" msgstr "" "W załączniku znajdziesz zwrot wiadomości, niestety jego format nie\n" "został automatycznie rozpoznany (nie rozpoznano z jakiego adresu pochodzi).\n" "Lista została skonfigurowana w taki sposób, że\n" "nierozpoznane zwroty są przekazywane do jej administratora(ów).\n" "\n" "Więcej informacji znajdziesz na stronie:\n" "%(adminurl)s\n" "\n" #: Mailman/Queue/BounceRunner.py:353 msgid "Uncaught bounce notification" msgstr "Powiadomienie o nierozpoznanych zwrotach" #: Mailman/Queue/CommandRunner.py:97 msgid "Ignoring non-text/plain MIME parts" msgstr "Zignorowano załączniki MIME, które nie są czystym tekstem(text/plain)" #: Mailman/Queue/CommandRunner.py:163 msgid "" "The results of your email command are provided below.\n" "Attached is your original message.\n" msgstr "" "Wyniki interpretacji wydanej przez Ciebie komendy pokazano \n" "poniżej. Oryginalną wiadomość znajdziesz w załączniku.\n" #: Mailman/Queue/CommandRunner.py:168 msgid "- Results:" msgstr "- Rezultat:" #: Mailman/Queue/CommandRunner.py:174 msgid "" "\n" "- Unprocessed:" msgstr "" "\n" "- Nieprzetworzone:" #: Mailman/Queue/CommandRunner.py:178 msgid "" "No commands were found in this message.\n" "To obtain instructions, send a message containing just the word \"help\".\n" msgstr "" "W wiadomości nie znaleziono żadnego polecenia.\n" "Wyślij wiadomość ze słowem 'help', żeby otrzymać listę możliwych poleceń.\n" #: Mailman/Queue/CommandRunner.py:183 msgid "" "\n" "- Ignored:" msgstr "" "\n" "- Zignorowane:" #: Mailman/Queue/CommandRunner.py:185 msgid "" "\n" "- Done.\n" "\n" msgstr "" "\n" "- Koniec.\n" "\n" #: Mailman/Queue/CommandRunner.py:209 msgid "The results of your email commands" msgstr "Rezultat polecenia przesłanego emailem" #: Mailman/Queue/CommandRunner.py:215 msgid "Message body suppressed by Mailman site configuration\n" msgstr "" #: Mailman/Queue/CommandRunner.py:217 msgid "Original message suppressed by Mailman site configuration\n" msgstr "" #: Mailman/htmlformat.py:648 msgid "Delivered by Mailman
    version %(version)s" msgstr "Wysłane przez program Mailman
    , (wersja %(version)s)" #: Mailman/htmlformat.py:649 msgid "Python Powered" msgstr "" #: Mailman/htmlformat.py:650 msgid "Gnu's Not Unix" msgstr "" #: Mailman/i18n.py:102 msgid "Mon" msgstr "Pon" #: Mailman/i18n.py:102 msgid "Thu" msgstr "Czw" #: Mailman/i18n.py:102 msgid "Tue" msgstr "Wto" #: Mailman/i18n.py:102 msgid "Wed" msgstr "Śro" #: Mailman/i18n.py:103 msgid "Fri" msgstr "Pią" #: Mailman/i18n.py:103 msgid "Sat" msgstr "Sob" #: Mailman/i18n.py:103 msgid "Sun" msgstr "Nie" #: Mailman/i18n.py:107 msgid "Apr" msgstr "Kwi" #: Mailman/i18n.py:107 msgid "Feb" msgstr "Lut" #: Mailman/i18n.py:107 msgid "Jan" msgstr "Sty" #: Mailman/i18n.py:107 msgid "Jun" msgstr "Cze" #: Mailman/i18n.py:107 msgid "Mar" msgstr "Mar" #: Mailman/i18n.py:108 msgid "Aug" msgstr "Sie" #: Mailman/i18n.py:108 msgid "Dec" msgstr "Gru" #: Mailman/i18n.py:108 msgid "Jul" msgstr "Lip" #: Mailman/i18n.py:108 msgid "Nov" msgstr "Lis" #: Mailman/i18n.py:108 msgid "Oct" msgstr "Paź" #: Mailman/i18n.py:108 msgid "Sep" msgstr "Wrz" #: Mailman/i18n.py:111 msgid "Server Local Time" msgstr "Lokalny Czas Serwera" #: Mailman/i18n.py:150 msgid "" "%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i" msgstr "" "%(wday)s, %(day)2i %(mon)s %(year)04i, %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s" #: bin/add_members:26 msgid "" "Add members to a list from the command line.\n" "\n" "Usage:\n" " add_members [options] listname\n" "\n" "Options:\n" "\n" " --regular-members-file=file\n" " -r file\n" " A file containing addresses of the members to be added, one\n" " address per line. This list of people become non-digest\n" " members. If file is `-', read addresses from stdin. Note that\n" " -n/--non-digest-members-file are deprecated synonyms for this " "option.\n" "\n" " --digest-members-file=file\n" " -d file\n" " Similar to above, but these people become digest members.\n" "\n" " --welcome-msg=\n" " -w \n" " Set whether or not to send the list members a welcome message,\n" " overriding whatever the list's `send_welcome_msg' setting is.\n" "\n" " --admin-notify=\n" " -a \n" " Set whether or not to send the list administrators a notification " "on\n" " the success/failure of these subscriptions, overriding whatever the\n" " list's `admin_notify_mchanges' setting is.\n" "\n" " --nomail\n" " -n\n" " Set the newly added members mail delivery to disabled by admin.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname\n" " The name of the Mailman list you are adding members to. It must\n" " already exist.\n" "\n" "You must supply at least one of -r and -d options. At most one of the\n" "files can be `-'.\n" msgstr "" #: bin/add_members:146 msgid "Already a member: %(member)s" msgstr "%(member)s jest już prenumeratorem" #: bin/add_members:152 msgid "Bad/Invalid email address: blank line" msgstr "Błędny format adresu" #: bin/add_members:154 msgid "Bad/Invalid email address: %(member)s" msgstr "Błędny adres email: %(member)s" #: bin/add_members:156 msgid "Hostile address (illegal characters): %(member)s" msgstr "" #: bin/add_members:158 msgid "Subscribed: %(member)s" msgstr "Zapisano: %(member)s" #: bin/add_members:199 msgid "Bad argument to -w/--welcome-msg: %(arg)s" msgstr "" #: bin/add_members:206 msgid "Bad argument to -a/--admin-notify: %(arg)s" msgstr "" #: bin/add_members:214 msgid "Cannot read both digest and normal members from standard input." msgstr "" #: bin/add_members:220 bin/config_list:109 bin/export.py:271 #: bin/find_member:97 bin/inject:91 bin/list_admins:90 bin/list_members:232 #: bin/sync_members:222 cron/bumpdigests:86 msgid "No such list: %(listname)s" msgstr "Lista %(listname)s nie istnieje na tym serwerze" #: bin/add_members:240 bin/change_pw:158 bin/check_db:114 bin/discard:83 #: bin/sync_members:244 bin/update:302 bin/update:323 bin/update:577 #: cron/bumpdigests:78 msgid "Nothing to do." msgstr "Brak zadań" #: bin/arch:19 msgid "" "Rebuild a list's archive.\n" "\n" "Use this command to rebuild the archives for a mailing list. You may want " "to\n" "do this if you edit some messages in an archive, or remove some messages " "from\n" "an archive.\n" "\n" "Usage: %(PROGRAM)s [options] []\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" " -q / --quiet\n" " Make the archiver output less verbose.\n" "\n" " --wipe\n" " First wipe out the original archive before regenerating. You " "usually\n" " want to specify this argument unless you're generating the archive " "in\n" " chunks.\n" "\n" " -s N\n" " --start=N\n" " Start indexing at article N, where article 0 is the first in the " "mbox.\n" " Defaults to 0.\n" "\n" " -e M\n" " --end=M\n" " End indexing at article M. This script is not very efficient with\n" " respect to memory management, and for large archives, it may not be\n" " possible to index the mbox entirely. For that reason, you can " "specify\n" " the start and end article numbers.\n" "\n" "Where is the path to a list's complete mbox archive. Usually this " "will\n" "be some path in the archives/private directory. For example:\n" "\n" "%% bin/arch mylist archives/private/mylist.mbox/mylist.mbox\n" "\n" " is optional. If it is missing, it is calculated.\n" msgstr "" #: bin/arch:125 msgid "listname is required" msgstr "podaj nazwę listy" #: bin/arch:143 bin/change_pw:106 bin/config_list:256 msgid "" "No such list \"%(listname)s\"\n" "%(e)s" msgstr "" "Brak listy \"%(listname)s\" na serwerze\n" "%(e)s" #: bin/arch:168 msgid "Cannot open mbox file %(mbox)s: %(msg)s" msgstr "" #: bin/b4b5-archfix:19 msgid "" "Fix the MM2.1b4 archives.\n" "\n" "Usage: %(PROGRAM)s [options] file ...\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" "Only use this to `fix' some archive database files that may have gotten\n" "written in Mailman 2.1b4 with some bogus data. Use like this from your\n" "$PREFIX directory\n" "\n" "%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n" "\n" "(note the backquotes are required)\n" "\n" "You will need to run `bin/check_perms -f' after running this script.\n" msgstr "" #: bin/change_pw:20 msgid "" "Change a list's password.\n" "\n" "Prior to Mailman 2.1, list passwords were kept in crypt'd format -- " "usually.\n" "Some Python installations didn't have the crypt module available, so they'd\n" "fall back to md5. Then suddenly the Python installation might grow a crypt\n" "module and all list passwords would be broken.\n" "\n" "In Mailman 2.1, all list and site passwords are stored in SHA1 hexdigest\n" "form. This breaks list passwords for all existing pre-Mailman 2.1 lists, " "and\n" "since those passwords aren't stored anywhere in plain text, they cannot be\n" "retrieved and updated.\n" "\n" "Thus, this script generates new passwords for a list, and optionally sends " "it\n" "to all the owners of the list.\n" "\n" "Usage: change_pw [options]\n" "\n" "Options:\n" "\n" " --all / -a\n" " Change the password for all lists.\n" "\n" " --domain=domain\n" " -d domain\n" " Change the password for all lists in the virtual domain `domain'. " "It\n" " is okay to give multiple -d options.\n" "\n" " --listname=listname\n" " -l listname\n" " Change the password only for the named list. It is okay to give\n" " multiple -l options.\n" "\n" " --password=newpassword\n" " -p newpassword\n" " Use the supplied plain text password `newpassword' as the new " "password\n" " for any lists that are being changed (as specified by the -a, -d, " "and\n" " -l options). If not given, lists will be assigned a randomly\n" " generated new password.\n" "\n" " --quiet / -q\n" " Don't notify list owners of the new password. You'll have to have\n" " some other way of letting the list owners know the new password\n" " (presumably out-of-band).\n" "\n" " --help / -h\n" " Print this help message and exit.\n" msgstr "" #: bin/change_pw:144 msgid "Bad arguments: %(strargs)s" msgstr "Błędny argument: %(strargs)s" #: bin/change_pw:148 msgid "Empty list passwords are not allowed" msgstr "Puste hasła nie są dozwolone" #: bin/change_pw:180 msgid "New %(listname)s password: %(notifypassword)s" msgstr "Nowe hasło %(notifypassword)s dla listy %(listname)s" #: bin/change_pw:189 msgid "Your new %(listname)s list password" msgstr "Nowe hasło dla listy %(listname)s" #: bin/change_pw:190 msgid "" "The site administrator at %(hostname)s has changed the password for your\n" "mailing list %(listname)s. It is now\n" "\n" " %(notifypassword)s\n" "\n" "Please be sure to use this for all future list administration. You may " "want\n" "to log in now to your list and change the password to something more to " "your\n" "liking. Visit your list admin page at\n" "\n" " %(adminurl)s\n" msgstr "" #: bin/check_db:19 msgid "" "Check a list's config database file for integrity.\n" "\n" "All of the following files are checked:\n" "\n" " config.pck\n" " config.pck.last\n" " config.db\n" " config.db.last\n" " config.safety\n" "\n" "It's okay if any of these are missing. config.pck and config.pck.last are\n" "pickled versions of the config database file for 2.1a3 and beyond. config." "db\n" "and config.db.last are used in all earlier versions, and these are Python\n" "marshals. config.safety is a pickle written by 2.1a3 and beyond when the\n" "primary config.pck file could not be read.\n" "\n" "Usage: %(PROGRAM)s [options] [listname [listname ...]]\n" "\n" "Options:\n" "\n" " --all / -a\n" " Check the databases for all lists. Otherwise only the lists named " "on\n" " the command line are checked.\n" "\n" " --verbose / -v\n" " Verbose output. The state of every tested file is printed.\n" " Otherwise only corrupt files are displayed.\n" "\n" " --help / -h\n" " Print this text and exit.\n" msgstr "" #: bin/check_db:119 msgid "No list named:" msgstr "Brak listy o nazwie:" #: bin/check_db:128 msgid "List:" msgstr "Lista:" #: bin/check_db:148 msgid " %(file)s: okay" msgstr "" #: bin/check_perms:20 msgid "" "Check the permissions for the Mailman installation.\n" "\n" "Usage: %(PROGRAM)s [-f] [-v] [-h]\n" "\n" "With no arguments, just check and report all the files that have bogus\n" "permissions or group ownership. With -f (and run as root), fix all the\n" "permission problems found. With -v be verbose.\n" msgstr "" #: bin/check_perms:110 msgid " checking gid and mode for %(path)s" msgstr "" #: bin/check_perms:122 msgid "%(path)s bad group (has: %(groupname)s, expected %(MAILMAN_GROUP)s)" msgstr "" #: bin/check_perms:151 msgid "directory permissions must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:160 msgid "source perms must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:171 msgid "article db files must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:183 msgid "checking mode for %(prefix)s" msgstr "" #: bin/check_perms:193 msgid "WARNING: directory does not exist: %(d)s" msgstr "Ostrzeżenie: nie ma takiego katalogu: %(d)s" #: bin/check_perms:197 msgid "directory must be at least 02775: %(d)s" msgstr "Katalog musi mieć przynajmniej uprawnienia 02775: %(d)s" #: bin/check_perms:209 msgid "checking perms on %(private)s" msgstr "sprawdzam uprawnienia dla %(private)s" #: bin/check_perms:214 msgid "%(private)s must not be other-readable" msgstr "" #: bin/check_perms:223 msgid "" "Warning: Private archive directory is other-executable (o+x).\n" " This could allow other users on your system to read private " "archives.\n" " If you're on a shared multiuser system, you should consult the\n" " installation manual on how to fix this." msgstr "" #: bin/check_perms:240 msgid "mbox file must be at least 0660:" msgstr "Plik mbox musi mieć przynajmniej uprawnienia 0660:" #: bin/check_perms:263 msgid "%(dbdir)s \"other\" perms must be 000" msgstr "" #: bin/check_perms:273 msgid "checking cgi-bin permissions" msgstr "sprawdzam uprawnienia skryptów cgi-bin" #: bin/check_perms:278 msgid " checking set-gid for %(path)s" msgstr "" #: bin/check_perms:282 msgid "%(path)s must be set-gid" msgstr "" #: bin/check_perms:292 msgid "checking set-gid for %(wrapper)s" msgstr "" #: bin/check_perms:296 msgid "%(wrapper)s must be set-gid" msgstr "" #: bin/check_perms:306 msgid "checking permissions on %(pwfile)s" msgstr "" #: bin/check_perms:315 msgid "%(pwfile)s permissions must be exactly 0640 (got %(octmode)s)" msgstr "" #: bin/check_perms:340 msgid "checking permissions on list data" msgstr "" #: bin/check_perms:348 msgid " checking permissions on: %(path)s" msgstr "" #: bin/check_perms:356 msgid "file permissions must be at least 660: %(path)s" msgstr "" #: bin/check_perms:401 msgid "No problems found" msgstr "Nie znaleziono żadnych problemów" #: bin/check_perms:403 msgid "Problems found:" msgstr "Problemy:" #: bin/check_perms:404 msgid "Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix" msgstr "" "Uruchom ponownie jako %(MAILMAN_USER)s (lub root) z flagą -f, by naprawić " "problem" #: bin/cleanarch:20 msgid "" "Clean up an .mbox archive file.\n" "\n" "The archiver looks for Unix-From lines separating messages in an mbox " "archive\n" "file. For compatibility, it specifically looks for lines that start with\n" "\"From \" -- i.e. the letters capital-F, lowercase-r, o, m, space, ignoring\n" "everything else on the line.\n" "\n" "Normally, any lines that start \"From \" in the body of a message should be\n" "escaped such that a > character is actually the first on a line. It is\n" "possible though that body lines are not actually escaped. This script\n" "attempts to fix these by doing a stricter test of the Unix-From lines. Any\n" "lines that start \"From \" but do not pass this stricter test are escaped " "with a\n" "> character.\n" "\n" "Usage: cleanarch [options] < inputfile > outputfile\n" "Options:\n" " -s n\n" " --status=n\n" " Print a # character every n lines processed\n" "\n" " -q / --quiet\n" " Don't print changed line information to standard error.\n" "\n" " -n / --dry-run\n" " Don't actually output anything.\n" "\n" " -h / --help\n" " Print this message and exit\n" msgstr "" #: bin/cleanarch:83 msgid "Unix-From line changed: %(lineno)d" msgstr "" #: bin/cleanarch:111 msgid "Bad status number: %(arg)s" msgstr "" #: bin/cleanarch:167 msgid "%(messages)d messages found" msgstr "" #: bin/clone_member:19 msgid "" "Clone a member address.\n" "\n" "Cloning a member address means that a new member will be added who has all " "the\n" "same options and passwords as the original member address. Note that this\n" "operation is fairly trusting of the user who runs it -- it does no\n" "verification to the new address, it does not send out a welcome message, " "etc.\n" "\n" "The existing member's subscription is usually not modified in any way. If " "you\n" "want to remove the old address, use the -r flag. If you also want to " "change\n" "any list admin addresses, use the -a flag.\n" "\n" "Usage:\n" " clone_member [options] fromoldaddr tonewaddr\n" "\n" "Where:\n" "\n" " --listname=listname\n" " -l listname\n" " Check and modify only the named mailing lists. If -l is not given,\n" " then all mailing lists are scanned from the address. Multiple -l\n" " options can be supplied.\n" "\n" " --remove\n" " -r\n" " Remove the old address from the mailing list after it's been " "cloned.\n" "\n" " --admin\n" " -a\n" " Scan the list admin addresses for the old address, and clone or " "change\n" " them too.\n" "\n" " --quiet\n" " -q\n" " Do the modifications quietly.\n" "\n" " --nomodify\n" " -n\n" " Print what would be done, but don't actually do it. Inhibits the\n" " --quiet flag.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " fromoldaddr (`from old address') is the old address of the user. " "tonewaddr\n" " (`to new address') is the new address of the user.\n" "\n" msgstr "" #: bin/clone_member:94 msgid "processing mailing list:" msgstr "przetwarzanie listy:" #: bin/clone_member:101 msgid " scanning list owners:" msgstr "skanowanie adresów opiekunów listy:" #: bin/clone_member:119 msgid " new list owners:" msgstr "nowi opiekunowie listy:" #: bin/clone_member:121 msgid "(no change)" msgstr "(bez zmian)" #: bin/clone_member:130 msgid " address not found:" msgstr "nie znaleziono adresu:" #: bin/clone_member:145 msgid " clone address added:" msgstr "" #: bin/clone_member:148 msgid " clone address is already a member:" msgstr "" #: bin/clone_member:151 msgid " original address removed:" msgstr "usunięto oryginalny adres:" #: bin/clone_member:202 msgid "Not a valid email address: %(toaddr)s" msgstr "Błędny adres email: %(toaddr)s" #: bin/clone_member:215 msgid "" "Error opening list \"%(listname)s\", skipping.\n" "%(e)s" msgstr "" "Nie mogę otworzyć listy \"%(listname)s\", pomijam ją.\n" "%(e)s" #: bin/config_list:20 msgid "" "Configure a list from a text file description.\n" "\n" "Usage: config_list [options] listname\n" "\n" "Options:\n" " --inputfile filename\n" " -i filename\n" " Configure the list by assigning each module-global variable in the\n" " file to an attribute on the list object, then saving the list. The\n" " named file is loaded with execfile() and must be legal Python code.\n" " Any variable that isn't already an attribute of the list object is\n" " ignored (a warning message is printed). See also the -c option.\n" "\n" " A special variable named `mlist' is put into the globals during the\n" " execfile, which is bound to the actual MailList object. This lets " "you\n" " do all manner of bizarre thing to the list object, but BEWARE! " "Using\n" " this can severely (and possibly irreparably) damage your mailing " "list!\n" "\n" " --outputfile filename\n" " -o filename\n" " Instead of configuring the list, print out a list's configuration\n" " variables in a format suitable for input using this script. In " "this\n" " way, you can easily capture the configuration settings for a\n" " particular list and imprint those settings on another list. " "filename\n" " is the file to output the settings to. If filename is `-', " "standard\n" " out is used.\n" "\n" " --checkonly\n" " -c\n" " With this option, the modified list is not actually changed. Only\n" " useful with -i.\n" "\n" " --verbose\n" " -v\n" " Print the name of each attribute as it is being changed. Only " "useful\n" " with -i.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" "The options -o and -i are mutually exclusive.\n" "\n" msgstr "" #: bin/config_list:117 msgid "" "# -*- python -*-\n" "# -*- coding: %(charset)s -*-\n" "## \"%(listname)s\" mailing list configuration settings\n" "## captured on %(when)s\n" msgstr "" #: bin/config_list:143 msgid "options" msgstr "opcje" #: bin/config_list:202 msgid "legal values are:" msgstr "dozwolone wartości to:" #: bin/config_list:269 msgid "attribute \"%(k)s\" ignored" msgstr "zignorowano atrybut \"%(k)s\"" #: bin/config_list:272 msgid "attribute \"%(k)s\" changed" msgstr "zmieniono atrybut \"%(k)s\"" #: bin/config_list:278 msgid "Non-standard property restored: %(k)s" msgstr "" #: bin/config_list:286 msgid "Invalid value for property: %(k)s" msgstr "Błędna wartość dla opcji: %(k)s" #: bin/config_list:288 msgid "Bad email address for option %(k)s: %(v)s" msgstr "Błędny adres e-mail dla opcji %(k)s: %(v)s" #: bin/config_list:345 msgid "Only one of -i or -o is allowed" msgstr "" #: bin/config_list:347 msgid "One of -i or -o is required" msgstr "" #: bin/config_list:351 msgid "List name is required" msgstr "Wymagana jest nazwa listy" #: bin/convert.py:19 msgid "" "Convert a list's interpolation strings from %-strings to $-strings.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r convert \n" msgstr "" #: bin/convert.py:38 bin/fix_url.py:90 msgid "Saving list" msgstr "Zapisywanie listy" #: bin/convert.py:44 bin/fix_url.py:51 bin/reset_pw.py:57 msgid "%%%" msgstr "" #: bin/discard:19 msgid "" "Discard held messages.\n" "\n" "Usage:\n" " discard [options] file ...\n" "\n" "Options:\n" " --help / -h\n" " Print this help message and exit.\n" "\n" " --quiet / -q\n" " Don't print status messages.\n" msgstr "" #: bin/discard:94 msgid "Ignoring non-held message: %(f)s" msgstr "Zignorowano niewstrzymaną wiadomość: %(f)s." #: bin/discard:100 msgid "Ignoring held msg w/bad id: %(f)s" msgstr "Zignorowano wstrzymaną wiadomość o złym id: %(f)s" #: bin/discard:112 msgid "Discarded held msg #%(id)s for list %(listname)s" msgstr "Odrzucone wstrzymanie wiadomości #%(id)s na liście %(listname)s" #: bin/dumpdb:19 msgid "" "Dump the contents of any Mailman `database' file.\n" "\n" "Usage: %(PROGRAM)s [options] filename\n" "\n" "Options:\n" "\n" " --marshal/-m\n" " Assume the file contains a Python marshal, overridding any " "automatic\n" " guessing.\n" "\n" " --pickle/-p\n" " Assume the file contains a Python pickle, overridding any automatic\n" " guessing.\n" "\n" " --noprint/-n\n" " Don't attempt to pretty print the object. This is useful if " "there's\n" " some problem with the object and you just want to get an unpickled\n" " representation. Useful with `python -i bin/dumpdb '. In " "that\n" " case, the root of the tree will be left in a global called \"msg\".\n" "\n" " --help/-h\n" " Print this help message and exit\n" "\n" "If the filename ends with `.db', then it is assumed that the file contains " "a\n" "Python marshal. If the file ends with `.pck' then it is assumed to contain " "a\n" "Python pickle. In either case, if you want to override the default " "assumption\n" "-- or if the file ends in neither suffix -- use the -p or -m flags.\n" msgstr "" #: bin/dumpdb:105 msgid "No filename given." msgstr "Nie podano nazwy pliku" #: bin/dumpdb:108 msgid "Bad arguments: %(pargs)s" msgstr "Błędne argumenty: %(pargs)s" #: bin/dumpdb:118 msgid "Please specify either -p or -m." msgstr "" #: bin/dumpdb:133 msgid "[----- start %(typename)s file -----]" msgstr "[----- początek pliku %(typename)s -----]" #: bin/dumpdb:139 msgid "[----- end %(typename)s file -----]" msgstr "[----- koniec pliku %(typename)s -----]" #: bin/dumpdb:142 msgid "<----- start object %(cnt)s ----->" msgstr "<----- początek obiektu %(cnt)s ----->" #: bin/export.py:20 msgid "Export an XML representation of a mailing list." msgstr "Eksportuj listę do pliku XML" #: bin/export.py:319 msgid "" "%%prog [options]\n" "\n" "Export the configuration and members of a mailing list in XML format." msgstr "" "%%prog [options]\n" "\n" "Wyksportuj konfigurację oraz subskrybentów listy do formatu XML." #: bin/export.py:325 msgid "" "Output XML to FILENAME. If not given, or if FILENAME is '-', standard out " "is\n" "used." msgstr "" "Zapisz XML do FILENAME. Jeśli nie podano nazwy pliku, lub jeśli FILENAME to " "'-', dane zostaną przesłane\n" "na standardowe wyjście." #: bin/export.py:329 msgid "" "Specify the RFC 2307 style hashing scheme for passwords included in the\n" "output. Use -P to get a list of supported schemes, which are\n" "case-insensitive." msgstr "" #: bin/export.py:334 msgid "" "List the supported password hashing schemes and exit. The scheme labels " "are\n" "case-insensitive." msgstr "" #: bin/export.py:339 msgid "" "The list to include in the output. If not given, then all mailing lists " "are\n" "included in the XML output. Multiple -l flags may be given." msgstr "" "Lista, która ma zostać wyeksportowana. Jeśli nie zostanie podana, do pliku " "XML wyeksportowanezostaną\n" "wszystkie listy. Można wielokrotnie stosować flagę -l." #: bin/export.py:345 msgid "Unexpected arguments" msgstr "Nieoczekiwane argumenty" #: bin/export.py:351 #, fuzzy msgid "Invalid password scheme" msgstr "Błędny schemat hasła" #: bin/find_member:19 msgid "" "Find all lists that a member's address is on.\n" "\n" "Usage:\n" " find_member [options] regex [regex [...]]\n" "\n" "Where:\n" " --listname=listname\n" " -l listname\n" " Include only the named list in the search.\n" "\n" " --exclude=listname\n" " -x listname\n" " Exclude the named list from the search.\n" "\n" " --owners\n" " -w\n" " Search list owners as well as members.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " regex\n" " A Python regular expression to match against.\n" "\n" "The interaction between -l and -x is as follows. If any -l option is given\n" "then only the named list will be included in the search. If any -x option " "is\n" "given but no -l option is given, then all lists will be search except those\n" "specifically excluded.\n" "\n" "Regular expression syntax is Perl5-like, using the Python re module. " "Complete\n" "specifications are at:\n" "\n" "http://docs.python.org/library/re.html\n" "\n" "Address matches are case-insensitive, but case-preserved addresses are\n" "displayed.\n" "\n" msgstr "" #: bin/find_member:159 msgid "Search regular expression required" msgstr "" #: bin/find_member:164 msgid "No lists to search" msgstr "Nie wskazano list, które miałaby być przeszukane" #: bin/find_member:173 msgid "found in:" msgstr "znaleziono w:" #: bin/find_member:179 msgid "(as owner)" msgstr "(jako właściciel)" #: bin/fix_url.py:19 msgid "" "Reset a list's web_page_url attribute to the default setting.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r fix_url listname [options]\n" "\n" "Options:\n" " -u urlhost\n" " --urlhost=urlhost\n" " Look up urlhost in the virtual host table and set the web_page_url " "and\n" " host_name attributes of the list to the values found. This\n" " essentially moves the list from one virtual domain to another.\n" "\n" " Without this option, the default web_page_url and host_name values " "are\n" " used.\n" "\n" " -v / --verbose\n" " Print what the script is doing.\n" "\n" "If run standalone, it prints this help text and exits.\n" msgstr "" #: bin/fix_url.py:75 #, fuzzy msgid "Locking list" msgstr "Zapisywanie listy" #: bin/fix_url.py:85 msgid "Setting web_page_url to: %(web_page_url)s" msgstr "Ustawienie zmiennej web_page_url: %(web_page_url)s" #: bin/fix_url.py:88 msgid "Setting host_name to: %(mailhost)s" msgstr "Ustawienie zmiennej host_name na adres: %(mailhost)s" #: bin/genaliases:19 msgid "" "Regenerate Mailman specific aliases from scratch.\n" "\n" "The actual output depends on the value of the `MTA' variable in your mm_cfg." "py\n" "file.\n" "\n" "Usage: genaliases [options]\n" "Options:\n" "\n" " -q/--quiet\n" " Some MTA output can include more verbose help text. Use this to " "tone\n" " down the verbosity.\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: bin/genaliases:84 msgid "genaliases can't do anything useful with mm_cfg.MTA = %(mta)s." msgstr "" #: bin/inject:20 msgid "" "Inject a message from a file into Mailman's incoming queue.\n" "\n" "Usage: inject [options] [filename]\n" "\n" "Options:\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" " -l listname\n" " --listname=listname\n" " The name of the list to inject this message to. Required.\n" "\n" " -q queuename\n" " --queue=queuename\n" " The name of the queue to inject the message to. The queuename must " "be\n" " one of the directories inside the qfiles directory. If omitted, " "the\n" " incoming queue is used.\n" "\n" "filename is the name of the plaintext message file to inject. If omitted,\n" "standard input is used.\n" msgstr "" #: bin/inject:84 msgid "Bad queue directory: %(qdir)s" msgstr "" #: bin/inject:89 msgid "A list name is required" msgstr "Nazwa listy jest niezbędna" #: bin/list_admins:20 msgid "" "List all the owners of a mailing list.\n" "\n" "Usage: %(program)s [options] listname ...\n" "\n" "Where:\n" "\n" " --all-vhost=vhost\n" " -v=vhost\n" " List the owners of all the mailing lists for the given virtual " "host.\n" "\n" " --all\n" " -a\n" " List the owners of all the mailing lists on this system.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" "`listname' is the name of the mailing list to print the owners of. You can\n" "have more than one named list on the command line.\n" msgstr "" #: bin/list_admins:97 msgid "List: %(listname)s, \tOwners: %(owners)s" msgstr "Lista: %(listname)s, \tOpiekunowie: %(owners)s" #: bin/list_lists:19 msgid "" "List all mailing lists.\n" "\n" "Usage: %(program)s [options]\n" "\n" "Where:\n" "\n" " -a / --advertised\n" " List only those mailing lists that are publically advertised\n" "\n" " -p / --public-archive\n" " List only those lists with public archives.\n" "\n" " --virtual-host-overview=domain\n" " -V domain\n" " List only those mailing lists that are homed to the given virtual\n" " domain. This only works if the VIRTUAL_HOST_OVERVIEW variable is\n" " set.\n" "\n" " -b / --bare\n" " Displays only the list name, with no description.\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" msgstr "" #: bin/list_lists:113 msgid "No matching mailing lists found" msgstr "Nie znaleziono list odpowiadających szukanym kryteriom" #: bin/list_lists:117 msgid "matching mailing lists found:" msgstr "Znaleziono listy odpowiadające szukanym kryteriom" #: bin/list_members:19 msgid "" "List all the members of a mailing list.\n" "\n" "Usage: %(PROGRAM)s [options] listname\n" "\n" "Where:\n" "\n" " --output file\n" " -o file\n" " Write output to specified file instead of standard out.\n" "\n" " --regular / -r\n" " Print just the regular (non-digest) members.\n" "\n" " --digest[=kind] / -d [kind]\n" " Print just the digest members. Optional argument can be \"mime\" " "or\n" " \"plain\" which prints just the digest members receiving that kind " "of\n" " digest.\n" "\n" " --nomail[=why] / -n [why]\n" " Print the members that have delivery disabled. Optional argument " "can\n" " be \"byadmin\", \"byuser\", \"bybounce\", or \"unknown\" which " "prints just the\n" " users who have delivery disabled for that reason. It can also be\n" " \"enabled\" which prints just those member for whom delivery is\n" " enabled.\n" "\n" " --fullnames / -f\n" " Include the full names in the output.\n" "\n" " --preserve / -p\n" " Output member addresses case preserved the way they were added to " "the\n" " list. Otherwise, addresses are printed in all lowercase.\n" "\n" " --invalid / -i\n" " Print only the addresses in the membership list that are invalid.\n" " Ignores -r, -d, -n.\n" "\n" " --unicode / -u\n" " Print addresses which are stored as Unicode objects instead of " "normal\n" " string objects. Ignores -r, -d, -n.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname is the name of the mailing list to use.\n" "\n" "Note that if neither -r or -d is supplied, both regular members are printed\n" "first, followed by digest members, but no indication is given as to address\n" "status.\n" msgstr "" #: bin/list_members:191 msgid "Bad --nomail option: %(why)s" msgstr "Błędna opcja --nomail:: %(why)s" #: bin/list_members:202 msgid "Bad --digest option: %(kind)s" msgstr "Błędna opcja --digest: %(kind)s" #: bin/list_members:224 msgid "Could not open file for writing:" msgstr "Nie można otworzyć pliku do zapisu:" #: bin/list_owners:20 msgid "" "List the owners of a mailing list, or all mailing lists.\n" "\n" "Usage: %(PROGRAM)s [options] [listname ...]\n" "Options:\n" "\n" " -w / --with-listnames\n" " Group the owners by list names and include the list names in the\n" " output. Otherwise, the owners will be sorted and uniquified based " "on\n" " the email address.\n" "\n" " -m / --moderators\n" " Include the list moderators in the output.\n" "\n" " -h / --help\n" " Print this help message and exit.\n" "\n" " listname\n" " Print the owners of the specified lists. More than one can appear\n" " after the options. If there are no listnames provided, the owners " "of\n" " all the lists will be displayed.\n" msgstr "" #: bin/mailmanctl:20 msgid "" "Primary start-up and shutdown script for Mailman's qrunner daemon.\n" "\n" "This script starts, stops, and restarts the main Mailman queue runners, " "making\n" "sure that the various long-running qrunners are still alive and kicking. " "It\n" "does this by forking and exec'ing the qrunners and waiting on their pids.\n" "When it detects a subprocess has exited, it may restart it.\n" "\n" "The qrunners respond to SIGINT, SIGTERM, and SIGHUP. SIGINT and SIGTERM " "both\n" "cause the qrunners to exit cleanly, but the master will only restart " "qrunners\n" "that have exited due to a SIGINT. SIGHUP causes the master and the " "qrunners\n" "to close their log files, and reopen then upon the next printed message.\n" "\n" "The master also responds to SIGINT, SIGTERM, and SIGHUP, which it simply\n" "passes on to the qrunners (note that the master will close and reopen its " "own\n" "log files on receipt of a SIGHUP). The master also leaves its own process " "id\n" "in the file data/master-qrunner.pid but you normally don't need to use this\n" "pid directly. The `start', `stop', `restart', and `reopen' commands handle\n" "everything for you.\n" "\n" "Usage: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n" "\n" "Options:\n" "\n" " -n/--no-restart\n" " Don't restart the qrunners when they exit because of an error or a\n" " SIGINT. They are never restarted if they exit in response to a\n" " SIGTERM. Use this only for debugging. Only useful if the `start'\n" " command is given.\n" "\n" " -u/--run-as-user\n" " Normally, this script will refuse to run if the user id and group " "id\n" " are not set to the `mailman' user and group (as defined when you\n" " configured Mailman). If run as root, this script will change to " "this\n" " user and group before the check is made.\n" "\n" " This can be inconvenient for testing and debugging purposes, so the -" "u\n" " flag means that the step that sets and checks the uid/gid is " "skipped,\n" " and the program is run as the current user and group. This flag is\n" " not recommended for normal production environments.\n" "\n" " Note though, that if you run with -u and are not in the mailman " "group,\n" " you may have permission problems, such as begin unable to delete a\n" " list's archives through the web. Tough luck!\n" "\n" " -s/--stale-lock-cleanup\n" " If mailmanctl finds an existing master lock, it will normally exit\n" " with an error message. With this option, mailmanctl will perform " "an\n" " extra level of checking. If a process matching the host/pid " "described\n" " in the lock file is running, mailmanctl will still exit, but if no\n" " matching process is found, mailmanctl will remove the apparently " "stale\n" " lock and make another attempt to claim the master lock.\n" "\n" " -q/--quiet\n" " Don't print status messages. Error messages are still printed to\n" " standard error.\n" "\n" " -h/--help\n" " Print this message and exit.\n" "\n" "Commands:\n" "\n" " start - Start the master daemon and all qrunners. Prints a message " "and\n" " exits if the master daemon is already running.\n" "\n" " stop - Stops the master daemon and all qrunners. After stopping, no\n" " more messages will be processed.\n" "\n" " restart - Restarts the qrunners, but not the master process. Use this\n" " whenever you upgrade or update Mailman so that the qrunners " "will\n" " use the newly installed code.\n" "\n" " reopen - This will close all log files, causing them to be re-opened " "the\n" " next time a message is written to them\n" msgstr "" #: bin/mailmanctl:152 msgid "PID unreadable in: %(pidfile)s" msgstr "Nie mogę odczytać PID w %(pidfile)s" #: bin/mailmanctl:154 msgid "Is qrunner even running?" msgstr "Czy program zarządzający kolejką jest uruchomiony?" #: bin/mailmanctl:160 msgid "No child with pid: %(pid)s" msgstr "Brak pliku potomnego z pid: %(pid)s" #: bin/mailmanctl:162 msgid "Stale pid file removed." msgstr "Usunięto stary plik pid" #: bin/mailmanctl:221 msgid "" "The master qrunner lock could not be acquired because it appears as if " "another\n" "master qrunner is already running.\n" msgstr "" #: bin/mailmanctl:227 msgid "" "The master qrunner lock could not be acquired. It appears as though there " "is\n" "a stale master qrunner lock. Try re-running mailmanctl with the -s flag.\n" msgstr "" #: bin/mailmanctl:233 msgid "" "The master qrunner lock could not be acquired, because it appears as if " "some\n" "process on some other host may have acquired it. We can't test for stale\n" "locks across host boundaries, so you'll have to do this manually. Or, if " "you\n" "know the lock is stale, re-run mailmanctl with the -s flag.\n" "\n" "Lock file: %(LOCKFILE)s\n" "Lock host: %(status)s\n" "\n" "Exiting." msgstr "" #: bin/mailmanctl:280 cron/mailpasswds:119 msgid "Site list is missing: %(sitelistname)s" msgstr "Brakuje listy systemowej: %(sitelistname)s" #: bin/mailmanctl:305 msgid "Run this program as root or as the %(name)s user, or use -u." msgstr "" "Uruchom program jako root lub jako użytkownik %(name)s, albo \n" "użyj opcji -u." #: bin/mailmanctl:336 msgid "No command given." msgstr "Nie podano polecenia." #: bin/mailmanctl:339 msgid "Bad command: %(command)s" msgstr "Błędne polecenie: %(command)s" #: bin/mailmanctl:344 msgid "Warning! You may encounter permission problems." msgstr "Uwaga! Problemy z prawami dostępu." #: bin/mailmanctl:353 msgid "Shutting down Mailman's master qrunner" msgstr "Zatrzymywanie zarządcy kolejki systemu Mailman" #: bin/mailmanctl:360 msgid "Restarting Mailman's master qrunner" msgstr "Restartowanie zarządcy kolejki systemu Mailman" #: bin/mailmanctl:364 msgid "Re-opening all log files" msgstr "Ponowne otwarcie wszystkich logów" #: bin/mailmanctl:400 msgid "Starting Mailman's master qrunner." msgstr "Uruchamianie zarządcy kolejki systemu Mailman." #: bin/mmsitepass:19 msgid "" "Set the site password, prompting from the terminal.\n" "\n" "The site password can be used in most if not all places that the list\n" "administrator's password can be used, which in turn can be used in most " "places\n" "that a list users password can be used.\n" "\n" "Usage: %(PROGRAM)s [options] [password]\n" "\n" "Options:\n" "\n" " -c/--listcreator\n" " Set the list creator password instead of the site password. The " "list\n" " creator is authorized to create and remove lists, but does not have\n" " the total power of the site administrator.\n" "\n" " -h/--help\n" " Print this help message and exit.\n" "\n" "If password is not given on the command line, it will be prompted for.\n" msgstr "" #: bin/mmsitepass:73 msgid "site" msgstr "serwis" #: bin/mmsitepass:80 msgid "list creator" msgstr "twórca list" #: bin/mmsitepass:86 msgid "New %(pwdesc)s password: " msgstr "" #: bin/mmsitepass:87 msgid "Again to confirm password: " msgstr "Ponownie potwierdź hasło" #: bin/mmsitepass:89 msgid "Passwords do not match; no changes made." msgstr "Hasła nie pasują do siebie" #: bin/mmsitepass:92 msgid "Interrupted..." msgstr "" #: bin/mmsitepass:98 msgid "Password changed." msgstr "Hasło zostało zmienione" #: bin/mmsitepass:100 msgid "Password change failed." msgstr "Nie doszło do zmiany hasła" #: bin/msgfmt.py:5 msgid "" "Generate binary message catalog from textual translation description.\n" "\n" "This program converts a textual Uniforum-style message catalog (.po file) " "into\n" "a binary GNU catalog (.mo file). This is essentially the same function as " "the\n" "GNU msgfmt program, however, it is a simpler implementation.\n" "\n" "Usage: msgfmt.py [OPTIONS] filename.po\n" "\n" "Options:\n" " -o file\n" " --output-file=file\n" " Specify the output file to write to. If omitted, output will go to " "a\n" " file named filename.mo (based off the input file name).\n" "\n" " -h\n" " --help\n" " Print this message and exit.\n" "\n" " -V\n" " --version\n" " Display version information and exit.\n" msgstr "" #: bin/msgfmt.py:49 msgid "Add a non-fuzzy translation to the dictionary." msgstr "" #: bin/msgfmt.py:57 msgid "Return the generated output." msgstr "Wyświetl wygenerowane wyniki." #: bin/newlist:20 msgid "" "Create a new, unpopulated mailing list.\n" "\n" "Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n" "\n" "Options:\n" "\n" " -l language\n" " --language=language\n" " Make the list's preferred language `language', which must be a two\n" " letter language code.\n" "\n" " -u urlhost\n" " --urlhost=urlhost\n" " Gives the list's web interface host name.\n" "\n" " -e emailhost\n" " --emailhost=emailhost\n" " Gives the list's email domain name.\n" "\n" " -q/--quiet\n" " Normally the administrator is notified by email (after a prompt) " "that\n" " their list has been created. This option suppresses the prompt and\n" " notification.\n" "\n" " -h/--help\n" " Print this help text and exit.\n" "\n" "You can specify as many of the arguments as you want on the command line:\n" "you will be prompted for the missing ones.\n" "\n" "Every Mailman list has two parameters which define the default host name " "for\n" "outgoing email, and the default URL for all web interfaces. When you\n" "configured Mailman, certain defaults were calculated, but if you are " "running\n" "multiple virtual Mailman sites, then the defaults may not be appropriate " "for\n" "the list you are creating.\n" "\n" "You also specify the domain to create your new list in by typing the " "command\n" "like so:\n" "\n" " newlist --urlhost=www.mydom.ain mylist\n" "\n" "where `www.mydom.ain' should be the base hostname for the URL to this " "virtual\n" "hosts's lists. E.g. with this setting people will view the general list\n" "overviews at http://www.mydom.ain/mailman/listinfo. Also, www.mydom.ain\n" "should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if\n" "the email hostname to be automatically determined.\n" "\n" "If you want the email hostname to be different from the one looked up by " "the\n" "VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can " "specify\n" "`emailhost' like so:\n" "\n" " newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n" "\n" "where `mydom.ain' is the mail domain name. If you don't specify emailhost " "but\n" "urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST " "will\n" "be used for the email interface.\n" "\n" "For backward compatibility, you can also specify the domain to create your\n" "new list in by spelling the listname like so:\n" "\n" " mylist@www.mydom.ain\n" "\n" "where www.mydom.ain is used for `urlhost' but it will also be used for\n" "`emailhost' if it is not found in the virtual host table. Note that\n" "'--urlhost' and '--emailhost' have precedence to this notation.\n" "\n" "If you spell the list name as just `mylist', then the email hostname will " "be\n" "taken from DEFAULT_EMAIL_HOST and the url will be taken from DEFAULT_URL " "(as\n" "defined in your Defaults.py file or overridden by settings in mm_cfg.py).\n" "\n" "Note that listnames are forced to lowercase.\n" msgstr "" #: bin/newlist:150 msgid "Unknown language: %(lang)s" msgstr "Nieznany język: %(lang)s" #: bin/newlist:155 msgid "Enter the name of the list: " msgstr "Podaj nazwę listy: " #: bin/newlist:176 msgid "Enter the email of the person running the list: " msgstr "Podaj email opiekuna listy: " #: bin/newlist:181 msgid "Initial %(listname)s password: " msgstr "Początkowe hasło listy %(listname)s: " #: bin/newlist:185 msgid "The list password cannot be empty" msgstr "Hasło listy nie może być puste" #: bin/newlist:208 msgid "" " - owner addresses need to be fully-qualified names like \"owner@example.com" "\", not just \"owner\"." msgstr "" #: bin/newlist:232 msgid "Hit enter to notify %(listname)s owner..." msgstr "Naciśnij Enter, by powiadomić opiekuna listy %(listname)s..." #: bin/qrunner:20 msgid "" "Run one or more qrunners, once or repeatedly.\n" "\n" "Each named runner class is run in round-robin fashion. In other words, the\n" "first named runner is run to consume all the files currently in its\n" "directory. When that qrunner is done, the next one is run to consume all " "the\n" "files in /its/ directory, and so on. The number of total iterations can be\n" "given on the command line.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" "\n" " -r runner[:slice:range]\n" " --runner=runner[:slice:range]\n" " Run the named qrunner, which must be one of the strings returned by\n" " the -l option. Optional slice:range if given, is used to assign\n" " multiple qrunner processes to a queue. range is the total number " "of\n" " qrunners for this queue while slice is the number of this qrunner " "from\n" " [0..range).\n" "\n" " If using the slice:range form, you better make sure that each " "qrunner\n" " for the queue is given the same range value. If slice:runner is " "not\n" " given, then 1:1 is used.\n" "\n" " Multiple -r options may be given, in which case each qrunner will " "run\n" " once in round-robin fashion. The special runner `All' is shorthand\n" " for a qrunner for each listed by the -l option.\n" "\n" " --once\n" " -o\n" " Run each named qrunner exactly once through its main loop. " "Otherwise,\n" " each qrunner runs indefinitely, until the process receives a " "SIGTERM\n" " or SIGINT.\n" "\n" " -l/--list\n" " Shows the available qrunner names and exit.\n" "\n" " -v/--verbose\n" " Spit out more debugging information to the logs/qrunner log file.\n" "\n" " -s/--subproc\n" " This should only be used when running qrunner as a subprocess of " "the\n" " mailmanctl startup script. It changes some of the exit-on-error\n" " behavior to work better with that framework.\n" "\n" " -h/--help\n" " Print this message and exit.\n" "\n" "runner is required unless -l or -h is given, and it must be one of the " "names\n" "displayed by the -l switch.\n" "\n" "Note also that this script should be started up from mailmanctl as a normal\n" "operation. It is only useful for debugging if it is run separately.\n" msgstr "" #: bin/qrunner:178 msgid "%(name)s runs the %(runnername)s qrunner" msgstr "" #: bin/qrunner:179 msgid "All runs all the above qrunners" msgstr "" #: bin/qrunner:215 msgid "No runner name given." msgstr "" #: bin/rb-archfix:21 msgid "" "Reduce disk space usage for Pipermail archives.\n" "\n" "Usage: %(PROGRAM)s [options] file ...\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" "Only use this to 'fix' archive -article database files that have been " "written\n" "with Mailman 2.1.3 or earlier and have html_body attributes in them. These\n" "attributes can cause huge amounts of memory bloat and impact performance " "for\n" "high activity lists, particularly those where large text postings are made " "to\n" "them.\n" "\n" "Example:\n" "\n" "%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n" "\n" "You should run `bin/check_perms -f' after running this script.\n" "\n" "You will probably want to delete the -article.bak files created by this " "script\n" "when you are satisfied with the results.\n" "\n" "This script is provided for convenience purposes only. It isn't supported.\n" msgstr "" #: bin/remove_members:20 msgid "" "Remove members from a list.\n" "\n" "Usage:\n" " remove_members [options] [listname] [addr1 ...]\n" "\n" "Options:\n" "\n" " --file=file\n" " -f file\n" " Remove member addresses found in the given file. If file is\n" " `-', read stdin.\n" "\n" " --all\n" " -a\n" " Remove all members of the mailing list.\n" " (mutually exclusive with --fromall)\n" "\n" " --fromall\n" " Removes the given addresses from all the lists on this system\n" " regardless of virtual domains if you have any. This option cannot " "be\n" " used -a/--all. Also, you should not specify a listname when using\n" " this option.\n" "\n" " --nouserack\n" " -n\n" " Don't send the user acknowledgements. If not specified, the list\n" " default value is used.\n" "\n" " --noadminack\n" " -N\n" " Don't send the admin acknowledgements. If not specified, the list\n" " default value is used.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname is the name of the mailing list to use.\n" "\n" " addr1 ... are additional addresses to remove.\n" msgstr "" #: bin/remove_members:156 msgid "Could not open file for reading: %(filename)s." msgstr "Pliku nie można otworzyć do odczytu: %(filename)s." #: bin/remove_members:163 msgid "Error opening list %(listname)s... skipping." msgstr "Błąd przy otwieraniu listy %(listname)s... pominięto." #: bin/remove_members:173 msgid "No such member: %(addr)s" msgstr "Nie znaleziono prenumeratora: %(addr)s." #: bin/remove_members:178 msgid "User `%(addr)s' removed from list: %(listname)s." msgstr "Użytkownik '%(addr)s' został usunięty z listy: %(listname)s." #: bin/reset_pw.py:21 msgid "" "Reset the passwords for members of a mailing list.\n" "\n" "This script resets all the passwords of a mailing list's members. It can " "also\n" "be used to reset the lists of all members of all mailing lists, but it is " "your\n" "responsibility to let the users know that their passwords have been " "changed.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r reset_pw listname [options]\n" "\n" "Options:\n" " -v / --verbose\n" " Print what the script is doing.\n" msgstr "" #: bin/reset_pw.py:77 msgid "Changing passwords for list: %(listname)s" msgstr "Zmiana haseł dla listy: %(listname)s" #: bin/reset_pw.py:83 msgid "New password for member %(member)40s: %(randompw)s" msgstr "Nowe hasło dla %(member)40s: %(randompw)s" #: bin/rmlist:19 msgid "" "Remove the components of a mailing list with impunity - beware!\n" "\n" "This removes (almost) all traces of a mailing list. By default, the lists\n" "archives are not removed, which is very handy for retiring old lists.\n" "\n" "Usage:\n" " rmlist [-a] [-h] listname\n" "\n" "Where:\n" " --archives\n" " -a\n" " Remove the list's archives too, or if the list has already been\n" " deleted, remove any residual archives.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" msgstr "" #: bin/rmlist:73 bin/rmlist:76 msgid "Removing %(msg)s" msgstr "Usuwanie %(msg)s" #: bin/rmlist:81 msgid "%(listname)s %(msg)s not found as %(filename)s" msgstr "%(listname)s %(msg)s nie znalezione jako %(filename)s" #: bin/rmlist:105 msgid "No such list (or list already deleted): %(listname)s" msgstr "Nie ma takiej listy (lub lista została już skasowana): %(listname)s" #: bin/rmlist:107 msgid "No such list: %(listname)s. Removing its residual archives." msgstr "Nie ma takiej listy: %(listname)s. Usuwanie pozostałych archiwów." #: bin/rmlist:111 msgid "Not removing archives. Reinvoke with -a to remove them." msgstr "Nie usunięto archiwum. Uruchom ponownie z opcją -a." #: bin/rmlist:125 msgid "list info" msgstr "informacja o liście" #: bin/rmlist:133 msgid "stale lock file" msgstr "" #: bin/rmlist:141 #, fuzzy msgid "held message file" msgstr "wszystkie wstrzymane wiadomości." #: bin/rmlist:146 bin/rmlist:148 msgid "private archives" msgstr "prywatne archiwum" #: bin/rmlist:150 bin/rmlist:152 msgid "public archives" msgstr "publiczne archiwum" #: bin/show_qfiles:20 msgid "" "Show the contents of one or more Mailman queue files.\n" "\n" "Usage: show_qfiles [options] qfile ...\n" "\n" "Options:\n" "\n" " -q / --quiet\n" " Don't print `helpful' message delimiters.\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" "Example: show_qfiles qfiles/shunt/*.pck\n" msgstr "" #: bin/sync_members:19 msgid "" "Synchronize a mailing list's membership with a flat file.\n" "\n" "This script is useful if you have a Mailman mailing list and a sendmail\n" ":include: style list of addresses (also as is used in Majordomo). For " "every\n" "address in the file that does not appear in the mailing list, the address " "is\n" "added. For every address in the mailing list that does not appear in the\n" "file, the address is removed. Other options control what happens when an\n" "address is added or removed.\n" "\n" "Usage: %(PROGRAM)s [options] -f file listname\n" "\n" "Where `options' are:\n" "\n" " --no-change\n" " -n\n" " Don't actually make the changes. Instead, print out what would be\n" " done to the list.\n" "\n" " --welcome-msg[=]\n" " -w[=]\n" " Sets whether or not to send the newly added members a welcome\n" " message, overriding whatever the list's `send_welcome_msg' setting\n" " is. With -w=yes or -w, the welcome message is sent. With -w=no, " "no\n" " message is sent.\n" "\n" " --goodbye-msg[=]\n" " -g[=]\n" " Sets whether or not to send the goodbye message to removed members,\n" " overriding whatever the list's `send_goodbye_msg' setting is. With\n" " -g=yes or -g, the goodbye message is sent. With -g=no, no message " "is\n" " sent.\n" "\n" " --digest[=]\n" " -d[=]\n" " Selects whether to make newly added members receive messages in\n" " digests. With -d=yes or -d, they become digest members. With -" "d=no\n" " (or if no -d option given) they are added as regular members.\n" "\n" " --notifyadmin[=]\n" " -a[=]\n" " Specifies whether the admin should be notified for each " "subscription\n" " or unsubscription. If you're adding a lot of addresses, you\n" " definitely want to turn this off! With -a=yes or -a, the admin is\n" " notified. With -a=no, the admin is not notified. With no -a " "option,\n" " the default for the list is used.\n" "\n" " --file \n" " -f \n" " This option is required. It specifies the flat file to synchronize\n" " against. Email addresses must appear one per line. If filename is\n" " `-' then stdin is used.\n" "\n" " --help\n" " -h\n" " Print this message.\n" "\n" " listname\n" " Required. This specifies the list to synchronize.\n" msgstr "" #: bin/sync_members:115 msgid "Bad choice: %(yesno)s" msgstr "Zły wybór: %(yesno)s" #: bin/sync_members:138 msgid "Dry run mode" msgstr "" #: bin/sync_members:159 msgid "Only one -f switch allowed" msgstr "Flagę -f można zastosować tylko raz" #: bin/sync_members:163 msgid "No argument to -f given" msgstr "" #: bin/sync_members:172 msgid "Illegal option: %(opt)s" msgstr "Błędna opcja: %(opt)s" #: bin/sync_members:178 msgid "No listname given" msgstr "Nie podano nazwy listy" #: bin/sync_members:182 msgid "Must have a listname and a filename" msgstr "Musisz podać nazwę listy oraz nazwę pliku" #: bin/sync_members:191 msgid "Cannot read address file: %(filename)s: %(msg)s" msgstr "Nie mogę odczytać pliku z adresami: %(filename)s: %(msg)s" #: bin/sync_members:203 msgid "Ignore : %(addr)30s" msgstr "" #: bin/sync_members:212 msgid "Invalid : %(addr)30s" msgstr "Nieprawidłowy : %(addr)30s" #: bin/sync_members:215 msgid "You must fix the preceding invalid addresses first." msgstr "Musisz najpierw poprawić błędne adresy" #: bin/sync_members:264 msgid "Added : %(s)s" msgstr "Dodano: %(s)s" #: bin/sync_members:288 msgid "Removed: %(s)s" msgstr "Usunięto: %(s)s" #: bin/transcheck:19 msgid "" "\n" "Check a given Mailman translation, making sure that variables and\n" "tags referenced in translation are the same variables and tags in\n" "the original templates and catalog.\n" "\n" "Usage:\n" "\n" "cd $MAILMAN_DIR\n" "%(program)s [-q] \n" "\n" "Where is your country code (e.g. 'it' for Italy) and -q is\n" "to ask for a brief summary.\n" msgstr "" #: bin/transcheck:58 msgid "check a translation comparing with the original string" msgstr "" #: bin/transcheck:68 msgid "scan a string from the original file" msgstr "" #: bin/transcheck:78 msgid "scan a translated string" msgstr "" #: bin/transcheck:91 msgid "check for differences between checked in and checked out" msgstr "" #: bin/transcheck:124 msgid "parse a .po file extracting msgids and msgstrs" msgstr "" #: bin/transcheck:143 msgid "" "States table for the finite-states-machine parser:\n" " 0 idle\n" " 1 filename-or-comment\n" " 2 msgid\n" " 3 msgstr\n" " 4 end\n" " " msgstr "" #: bin/transcheck:280 msgid "" "check a translated template against the original one\n" " search also tags if html is not zero" msgstr "" #: bin/transcheck:327 msgid "scan the po file comparing msgids with msgstrs" msgstr "" #: bin/unshunt:20 msgid "" "Move a message from the shunt queue to the original queue.\n" "\n" "Usage: %(PROGRAM)s [options] [directory]\n" "\n" "Where:\n" "\n" " -h / --help\n" " Print help and exit.\n" "\n" "Optional `directory' specifies a directory to dequeue from other than\n" "qfiles/shunt. *** Warning *** Do not unshunt messages that weren't\n" "shunted to begin with. For example, running unshunt on qfiles/out/\n" "will result in losing all the messages in that queue.\n" msgstr "" #: bin/unshunt:85 msgid "" "Cannot unshunt message %(filebase)s, skipping:\n" "%(e)s" msgstr "" #: bin/update:20 msgid "" "Perform all necessary upgrades.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -f/--force\n" " Force running the upgrade procedures. Normally, if the version " "number\n" " of the installed Mailman matches the current version number (or a\n" " `downgrade' is detected), nothing will be done.\n" "\n" " -h/--help\n" " Print this text and exit.\n" "\n" "Use this script to help you update to the latest release of Mailman from\n" "some previous version. It knows about versions back to 1.0b4 (?).\n" msgstr "" #: bin/update:107 msgid "Fixing language templates: %(listname)s" msgstr "Poprawiam szablony językowe: %(listname)s" #: bin/update:196 bin/update:711 msgid "WARNING: could not acquire lock for list: %(listname)s" msgstr "Uwaga: nie można zamknąć przed zapisem pliku listy %(listname)s" #: bin/update:215 msgid "Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info" msgstr "" #: bin/update:221 msgid "Updating the held requests database." msgstr "Aktualizowanie bazy wstrzymanych wiadomości" #: bin/update:243 msgid "" "For some reason, %(mbox_dir)s exists as a file. This won't work with\n" "b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding." msgstr "" #: bin/update:255 msgid "" "\n" "%(listname)s has both public and private mbox archives. Since this list\n" "currently uses private archiving, I'm installing the private mbox archive\n" "-- %(o_pri_mbox_file)s -- as the active archive, and renaming\n" " %(o_pub_mbox_file)s\n" "to\n" " %(o_pub_mbox_file)s.preb6\n" "\n" "You can integrate that into the archives if you want by using the 'arch'\n" "script.\n" msgstr "" #: bin/update:270 msgid "" "%s has both public and private mbox archives. Since this list\n" "currently uses public archiving, I'm installing the public mbox file\n" "archive file (%s) as the active one, and renaming\n" " %s\n" " to\n" " %s.preb6\n" "\n" "You can integrate that into the archives if you want by using the 'arch'\n" "script.\n" msgstr "" #: bin/update:287 msgid "- updating old private mbox file" msgstr "- aktualizowanie starego, prywatnego pliku mbox" #: bin/update:295 msgid "" " unknown file in the way, moving\n" " %(o_pri_mbox_file)s\n" " to\n" " %(newname)s" msgstr "" #: bin/update:309 msgid "- updating old public mbox file" msgstr "- aktualizowanie starego, publicznego pliku mbox" #: bin/update:317 msgid "" " unknown file in the way, moving\n" " %(o_pub_mbox_file)s\n" " to\n" " %(newname)s" msgstr "" #: bin/update:353 msgid "- This list looks like it might have <= b4 list templates around" msgstr "" #: bin/update:361 msgid "- moved %(o_tmpl)s to %(n_tmpl)s" msgstr "" #: bin/update:363 msgid "- both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched" msgstr "" #: bin/update:366 msgid "- %(o_tmpl)s doesn't exist, leaving untouched" msgstr "" #: bin/update:396 msgid "removing directory %(src)s and everything underneath" msgstr "usuwanie katalogu %(src)s i wszystkich subkatalogów" #: bin/update:399 msgid "removing %(src)s" msgstr "usuwanie %(src)s" #: bin/update:403 msgid "Warning: couldn't remove %(src)s -- %(rest)s" msgstr "Uwaga: nie mogłem usunąć %(src)s -- %(rest)s" #: bin/update:408 msgid "couldn't remove old file %(pyc)s -- %(rest)s" msgstr "nie mogłem usunąć starego pliku %(pyc)s -- %(rest)s" #: bin/update:412 msgid "updating old qfiles" msgstr "aktualizacja starych plików kolejki" #: bin/update:455 msgid "Warning! Not a directory: %(dirpath)s" msgstr "Uwaga: wybrany obiekt to nie katalog: %(dirpath)s" #: bin/update:530 msgid "message is unparsable: %(filebase)s" msgstr "nie można przetworzyć wiadomości: %(filebase)s" #: bin/update:544 msgid "Warning! Deleting empty .pck file: %(pckfile)s" msgstr "Uwaga! Usuwam pusty plik .pck: %(pckfile)s" #: bin/update:563 msgid "Updating Mailman 2.0 pending_subscriptions.db database" msgstr "Aktualizuję bazę pending_subscriptions.db w Mailman 2.0" #: bin/update:574 msgid "Updating Mailman 2.1.4 pending.pck database" msgstr "Aktualizuję bazę pending.pck w Mailman 2.1.4 " #: bin/update:598 msgid "Ignoring bad pended data: %(key)s: %(val)s" msgstr "" #: bin/update:614 msgid "WARNING: Ignoring duplicate pending ID: %(id)s." msgstr "" "Ostrzeżenie: Ignorowanie oczekujących wiadomości o tym samym ID: %(id)s." #: bin/update:667 msgid "getting rid of old source files" msgstr "usuwanie starych plików źródłowych" #: bin/update:677 msgid "no lists == nothing to do, exiting" msgstr "brak list == brak zadań do realizacji, kończę pracę" #: bin/update:684 msgid "" "fixing all the perms on your old html archives to work with b6\n" "If your archives are big, this could take a minute or two..." msgstr "" "poprawiam uprawnienia plików w starych archiwach html, by były kompatybilne " "z b6\n" "Jeśli archiwa są duże, proces ten może zająć kilka minut..." #: bin/update:689 msgid "done" msgstr "gotowe" #: bin/update:691 msgid "Updating mailing list: %(listname)s" msgstr "Aktualizowanie listy %(listname)s" #: bin/update:694 msgid "Updating Usenet watermarks" msgstr "" #: bin/update:699 msgid "- nothing to update here" msgstr "- brak plików do zaktualizowania" #: bin/update:722 msgid "- usenet watermarks updated and gate_watermarks removed" msgstr "" #: bin/update:736 msgid "" "\n" "\n" "NOTE NOTE NOTE NOTE NOTE\n" "\n" " You are upgrading an existing Mailman installation, but I can't tell " "what\n" " version you were previously running.\n" "\n" " If you are upgrading from Mailman 1.0b9 or earlier you will need to\n" " manually update your mailing lists. For each mailing list you need to\n" " copy the file templates/options.html lists//options.html.\n" "\n" " However, if you have edited this file via the Web interface, you will " "have\n" " to merge your changes into this file, otherwise you will lose your\n" " changes.\n" "\n" "NOTE NOTE NOTE NOTE NOTE\n" "\n" msgstr "" #: bin/update:793 msgid "No updates are necessary." msgstr "Nie są wymagane żadne aktualizacje" #: bin/update:796 msgid "" "Downgrade detected, from version %(hexlversion)s to version %(hextversion)s\n" "This is probably not safe.\n" "Exiting." msgstr "" #: bin/update:801 msgid "Upgrading from version %(hexlversion)s to %(hextversion)s" msgstr "Aktualizacja z wersji %(hexlversion)s do %(hextversion)s" #: bin/update:810 msgid "" "\n" "ERROR:\n" "\n" "The locks for some lists could not be acquired. This means that either\n" "Mailman was still active when you upgraded, or there were stale locks in " "the\n" "%(lockdir)s directory.\n" "\n" "You must put Mailman into a quiescent state and remove all stale locks, " "then\n" "re-run \"make update\" manually. See the INSTALL and UPGRADE files for " "details.\n" msgstr "" #: bin/version:19 msgid "Print the Mailman version.\n" msgstr "Wyświetl wersję programu Mailman.\n" #: bin/version:26 msgid "Using Mailman version:" msgstr "Wersja Mailmana:" #: bin/withlist:20 msgid "" "General framework for interacting with a mailing list object.\n" "\n" "There are two ways to use this script: interactively or programmatically.\n" "Using it interactively allows you to play with, examine and modify a " "MailList\n" "object from Python's interactive interpreter. When running interactively, " "a\n" "MailList object called `m' will be available in the global namespace. It " "also\n" "loads the class MailList into the global namespace.\n" "\n" "Programmatically, you can write a function to operate on a MailList object,\n" "and this script will take care of the housekeeping (see below for " "examples).\n" "In that case, the general usage syntax is:\n" "\n" "%% bin/withlist [options] listname [args ...]\n" "\n" "Options:\n" "\n" " -l / --lock\n" " Lock the list when opening. Normally the list is opened unlocked\n" " (e.g. for read-only operations). You can always lock the file " "after\n" " the fact by typing `m.Lock()'\n" "\n" " Note that if you use this option, you should explicitly call m.Save" "()\n" " before exiting, since the interpreter's clean up procedure will not\n" " automatically save changes to the MailList object (but it will " "unlock\n" " the list).\n" "\n" " -i / --interactive\n" " Leaves you at an interactive prompt after all other processing is\n" " complete. This is the default unless the -r option is given.\n" "\n" " --run [module.]callable\n" " -r [module.]callable\n" " This can be used to run a script with the opened MailList object.\n" " This works by attempting to import `module' (which must be in the\n" " directory containing withlist, or already be accessible on your\n" " sys.path), and then calling `callable' from the module. callable " "can\n" " be a class or function; it is called with the MailList object as " "the\n" " first argument. If additional args are given on the command line,\n" " they are passed as subsequent positional args to the callable.\n" "\n" " Note that `module.' is optional; if it is omitted then a module " "with\n" " the name `callable' will be imported.\n" "\n" " The global variable `r' will be set to the results of this call.\n" "\n" " --all / -a\n" " This option only works with the -r option. Use this if you want to\n" " execute the script on all mailing lists. When you use -a you " "should\n" " not include a listname argument on the command line. The variable " "`r'\n" " will be a list of all the results.\n" "\n" " --quiet / -q\n" " Suppress all status messages.\n" "\n" " --help / -h\n" " Print this message and exit\n" "\n" "\n" "Here's an example of how to use the -r option. Say you have a file in the\n" "Mailman installation directory called `listaddr.py', with the following\n" "two functions:\n" "\n" "def listaddr(mlist):\n" " print mlist.GetListEmail()\n" "\n" "def requestaddr(mlist):\n" " print mlist.GetRequestEmail()\n" "\n" "Now, from the command line you can print the list's posting address by " "running\n" "the following from the command line:\n" "\n" "%% bin/withlist -r listaddr mylist\n" "Loading list: mylist (unlocked)\n" "Importing listaddr ...\n" "Running listaddr.listaddr() ...\n" "mylist@myhost.com\n" "\n" "And you can print the list's request address by running:\n" "\n" "%% bin/withlist -r listaddr.requestaddr mylist\n" "Loading list: mylist (unlocked)\n" "Importing listaddr ...\n" "Running listaddr.requestaddr() ...\n" "mylist-request@myhost.com\n" "\n" "As another example, say you wanted to change the password for a particular\n" "user on a particular list. You could put the following function in a file\n" "called `changepw.py':\n" "\n" "from Mailman.Errors import NotAMemberError\n" "\n" "def changepw(mlist, addr, newpasswd):\n" " try:\n" " mlist.setMemberPassword(addr, newpasswd)\n" " mlist.Save()\n" " except NotAMemberError:\n" " print 'No address matched:', addr\n" "\n" "and run this from the command line:\n" " %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n" msgstr "" #: bin/withlist:164 msgid "" "Unlock a locked list, but do not implicitly Save() it.\n" "\n" " This does not get run if the interpreter exits because of a signal, or " "if\n" " os._exit() is called. It will get called if an exception occurs " "though.\n" " " msgstr "" #: bin/withlist:175 msgid "Unlocking (but not saving) list: %(listname)s" msgstr "Odblokowanie listy: %(listname)s" #: bin/withlist:179 msgid "Finalizing" msgstr "Prawie gotowe" #: bin/withlist:188 msgid "Loading list %(listname)s" msgstr "Wczytywanie listy %(listname)s" #: bin/withlist:190 msgid "(locked)" msgstr "(zablokowana)" #: bin/withlist:192 msgid "(unlocked)" msgstr "(odblokowana)" #: bin/withlist:197 msgid "Unknown list: %(listname)s" msgstr "Nieznana lista: %(listname)s" #: bin/withlist:237 msgid "No list name supplied." msgstr "Nie podano nazwy listy" #: bin/withlist:246 msgid "--all requires --run" msgstr "opcja --all wymaga --run" #: bin/withlist:266 msgid "Importing %(module)s..." msgstr "Importowania %(module)s..." #: bin/withlist:270 msgid "Running %(module)s.%(callable)s()..." msgstr "" #: bin/withlist:291 msgid "The variable `m' is the %(listname)s MailList instance" msgstr "" #: cron/bumpdigests:19 msgid "" "Increment the digest volume number and reset the digest number to one.\n" "\n" "Usage: %(PROGRAM)s [options] [listname ...]\n" "\n" "Options:\n" "\n" " --help/-h\n" " Print this message and exit.\n" "\n" "The lists named on the command line are bumped. If no list names are " "given,\n" "all lists are bumped.\n" msgstr "" #: cron/checkdbs:20 msgid "" "Check for pending admin requests and mail the list owners if necessary.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" "Sprawdź oczekujące skolejkowane zadania administracyjne oraz wyślij email " "do\n" "opiekuna listy.\n" "Wykorzystanie: %(PROGRAM)s [options]\n" "\n" "Opcje:\n" "\n" " -h/--help\n" " Wyświetl wiadomość i zakończ działanie.\n" #: cron/checkdbs:108 msgid "" "Notice: %(discarded)d old request(s) automatically expired.\n" "\n" msgstr "" "Liczba zignorowanych starych żądań: %(discarded)d.\n" "\n" #: cron/checkdbs:121 msgid "%(count)d %(realname)s moderator request(s) waiting" msgstr "Liczba zadań dla moderatora %(realname)s: %(count)d" #: cron/checkdbs:124 msgid "%(realname)s moderator request check result" msgstr "Zadania oczekujące na moderatora %(realname)s" #: cron/checkdbs:144 msgid "Pending subscriptions:" msgstr "Prośby o zapisanie:" #: cron/checkdbs:155 #, fuzzy msgid "Pending unsubscriptions:" msgstr "Prośby o zapisanie:" #: cron/checkdbs:162 msgid "" "\n" "Pending posts:" msgstr "" "\n" "Wiadomości oczekujące:" #: cron/checkdbs:169 msgid "" "From: %(sender)s on %(date)s\n" "Subject: %(subject)s\n" "Cause: %(reason)s" msgstr "" "Od: %(sender)s dnia %(date)s\n" "Temat: %(subject)s\n" "Powód: %(reason)s" #: cron/cull_bad_shunt:20 msgid "" "Cull bad and shunt queues, recommended once per day.\n" "\n" "This script goes through the 'bad' and 'shunt' queue directories and,\n" "if mm_cfg.BAD_SHUNT_STALE_AFTER is > 0, it removes all files more than\n" "that many seconds old.\n" "\n" "If mm_cfg.BAD_SHUNT_ARCHIVE_DIRECTORY is a writable directory, the old\n" "files are moved there. Otherwise they are deleted.\n" "\n" "Only regular files immediately subordinate to the 'bad' and 'shunt'\n" "directories are processed. Anything else is skipped.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" msgstr "" #: cron/disabled:20 msgid "" "Process disabled members, recommended once per day.\n" "\n" "This script cruises through every mailing list looking for members whose\n" "delivery is disabled. If they have been disabled due to bounces, they will\n" "receive another notification, or they may be removed if they've received " "the\n" "maximum number of notifications.\n" "\n" "Use the --byadmin, --byuser, and --unknown flags to also send notifications " "to\n" "members whose accounts have been disabled for those reasons. Use --all to\n" "send the notification to all disabled members.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" "\n" " -o / --byadmin\n" " Also send notifications to any member disabled by the list\n" " owner/administrator.\n" "\n" " -m / --byuser\n" " Also send notifications to any member disabled by themselves.\n" "\n" " -u / --unknown\n" " Also send notifications to any member disabled for unknown reasons\n" " (usually a legacy disabled address).\n" "\n" " -b / --notbybounce\n" " Don't send notifications to members disabled because of bounces " "(the\n" " default is to notify bounce disabled members).\n" "\n" " -a / --all\n" " Send notifications to all disabled members.\n" "\n" " -f / --force\n" " Send notifications to disabled members even if they're not due a " "new\n" " notification yet.\n" "\n" " -l listname\n" " --listname=listname\n" " Process only the given list, otherwise do all lists.\n" msgstr "" #: cron/disabled:145 msgid "[disabled by periodic sweep and cull, no message available]" msgstr "" #: cron/gate_news:19 msgid "" "Poll the NNTP servers for messages to be gatewayed to mailing lists.\n" "\n" "Usage: gate_news [options]\n" "\n" "Where options are\n" "\n" " --help\n" " -h\n" " Print this text and exit.\n" "\n" msgstr "" #: cron/mailpasswds:19 msgid "" "Send password reminders for all lists to all users.\n" "\n" "This program scans all mailing lists and collects users and their " "passwords,\n" "grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true. " "Then\n" "one email message is sent to each unique user (per-virtual host) containing\n" "the list passwords and options url for the user. The password reminder " "comes\n" "from the mm_cfg.MAILMAN_SITE_LIST, which must exist.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -l listname\n" " --listname=listname\n" " Send password reminders for the named list only. If omitted,\n" " reminders are sent for all lists. Multiple -l/--listname options " "are\n" " allowed.\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: cron/mailpasswds:216 msgid "Password // URL" msgstr "Hasło // Adres URL" #: cron/mailpasswds:222 msgid "%(host)s mailing list memberships reminder" msgstr "Przypomnienie o listach na %(host)s" #: cron/nightly_gzip:19 msgid "" "Re-generate the Pipermail gzip'd archive flat files.\n" "\n" "This script should be run nightly from cron. When run from the command " "line,\n" "the following usage is understood:\n" "\n" "Usage: %(program)s [-v] [-h] [listnames]\n" "\n" "Where:\n" " --verbose\n" " -v\n" " print each file as it's being gzip'd\n" "\n" " --help\n" " -h\n" " print this message and exit\n" "\n" " listnames\n" " Optionally, only compress the .txt files for the named lists. " "Without \n" " this, all archivable lists are processed.\n" "\n" msgstr "" #: cron/senddigests:20 msgid "" "Dispatch digests for lists w/pending messages and digest_send_periodic set.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" "\n" " -l listname\n" " --listname=listname\n" " Send the digest for the given list only, otherwise the digests for " "all\n" " lists are sent out.\n" msgstr "" #, fuzzy #~ msgid "" #~ "

    If \n" #~ " dmarc_moderation_action applies to this message with an\n" #~ " action other than Accept, that action rather than this is\n" #~ " applied" #~ msgstr "" #~ "Tekst, który zostanie dołączony do każdego powiadomienia o odrzuceniu " #~ "wiadomości od moderowanego subskrybenta listy." #~ msgid "" #~ "\n" #~ " who\n" #~ " See everyone who is on this mailing list.\n" #~ msgstr "" #~ "\n" #~ " who\n" #~ " Zobacz listę osób zapisanych.\n" #~ msgid "" #~ "Approval notices are sent when mail triggers certain of the\n" #~ " limits except routine list moderation and spam " #~ "filters,\n" #~ " for which notices are not sent. This option " #~ "overrides\n" #~ " ever sending the notice." #~ msgstr "" #~ "Wiadomości o potrzebie zatwierdzenia są wysyłane, jeśli list przekroczy\n" #~ "określone limity, z wyjątkiem rutynowej moderacji i filtrów\n" #~ "antyspamowych, w których przypadku wiadomości nie są wysyłane.\n" #~ "Ta opcja umożliwia globalne wyłączenie wysyłania wszystkich informacji." #~ msgid "You have been invited to join the %(listname)s mailing list" #~ msgstr "Zaproszonenie do listy \"%(listname)s\""