# Dutch translation for Mailman. # Copyright © 2006 Free Software Foundation. # , 2002. # , 2002. # Jan Veuger , 2006. # msgid "" msgstr "" "Project-Id-Version: Mailman 2.1.10\n" "POT-Creation-Date: Fri Jun 6 11:25:34 2008\n" "PO-Revision-Date: 2008-02-26 13:00+0100\n" "Last-Translator: Jan Veuger \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" #: Mailman/Archiver/HyperArch.py:123 msgid "size not available" msgstr "grootte niet beschikbaar" #: Mailman/Archiver/HyperArch.py:129 msgid " %(size)i bytes " msgstr " %(size)i bytes " #: Mailman/Archiver/HyperArch.py:284 Mailman/Archiver/HyperArch.py:287 #: Mailman/Archiver/HyperArch.py:415 Mailman/Archiver/HyperArch.py:469 #: Mailman/Archiver/HyperArch.py:577 Mailman/Archiver/HyperArch.py:1051 #: Mailman/Archiver/HyperArch.py:1180 msgid " at " msgstr " op " #: Mailman/Archiver/HyperArch.py:498 msgid "Previous message:" msgstr "Vorig bericht:" #: Mailman/Archiver/HyperArch.py:520 msgid "Next message:" msgstr "Volgend Bericht:" #: Mailman/Archiver/HyperArch.py:692 Mailman/Archiver/HyperArch.py:728 msgid "thread" msgstr "Draad" #: Mailman/Archiver/HyperArch.py:693 Mailman/Archiver/HyperArch.py:729 msgid "subject" msgstr "onderwerp" #: Mailman/Archiver/HyperArch.py:694 Mailman/Archiver/HyperArch.py:730 msgid "author" msgstr "auteur" #: Mailman/Archiver/HyperArch.py:695 Mailman/Archiver/HyperArch.py:731 msgid "date" msgstr "datum" #: Mailman/Archiver/HyperArch.py:767 msgid "

Currently, there are no archives.

" msgstr "

Er zijn momenteel geen archieven.

" #: Mailman/Archiver/HyperArch.py:805 msgid "Gzip'd Text%(sz)s" msgstr "Gezipte tekst%(sz)s" #: Mailman/Archiver/HyperArch.py:810 msgid "Text%(sz)s" msgstr "Tekst %(sz)s" #: Mailman/Archiver/HyperArch.py:900 msgid "figuring article archives\n" msgstr "berekenen van artikelarchieven\n" #: Mailman/Archiver/HyperArch.py:910 msgid "April" msgstr "april" #: Mailman/Archiver/HyperArch.py:910 msgid "February" msgstr "februari" #: Mailman/Archiver/HyperArch.py:910 msgid "January" msgstr "januari" #: Mailman/Archiver/HyperArch.py:910 msgid "March" msgstr "maart" #: Mailman/Archiver/HyperArch.py:911 msgid "August" msgstr "augustus" #: Mailman/Archiver/HyperArch.py:911 msgid "July" msgstr "juli" #: Mailman/Archiver/HyperArch.py:911 msgid "June" msgstr "juni" #: Mailman/Archiver/HyperArch.py:911 Mailman/i18n.py:103 msgid "May" msgstr "mei" #: Mailman/Archiver/HyperArch.py:912 msgid "December" msgstr "december" #: Mailman/Archiver/HyperArch.py:912 msgid "November" msgstr "november" #: Mailman/Archiver/HyperArch.py:912 msgid "October" msgstr "oktober" #: Mailman/Archiver/HyperArch.py:912 msgid "September" msgstr "september" #: Mailman/Archiver/HyperArch.py:920 msgid "First" msgstr "Eerste" #: Mailman/Archiver/HyperArch.py:920 msgid "Fourth" msgstr "Vierde" #: Mailman/Archiver/HyperArch.py:920 msgid "Second" msgstr "Tweede" #: Mailman/Archiver/HyperArch.py:920 msgid "Third" msgstr "Derde" #: Mailman/Archiver/HyperArch.py:922 msgid "%(ord)s quarter %(year)i" msgstr "%(ord)s kwartaal %(year)i" #: Mailman/Archiver/HyperArch.py:929 msgid "%(month)s %(year)i" msgstr "%(month)s %(year)i" #: Mailman/Archiver/HyperArch.py:934 msgid "The Week Of Monday %(day)i %(month)s %(year)i" msgstr "De week van maandag %(day)i %(month)s %(year)i" #: Mailman/Archiver/HyperArch.py:938 msgid "%(day)i %(month)s %(year)i" msgstr "%(day)i %(month)s %(year)i" #: Mailman/Archiver/HyperArch.py:1038 msgid "Computing threaded index\n" msgstr "Berekenen van draadindex\n" #: Mailman/Archiver/HyperArch.py:1303 msgid "Updating HTML for article %(seq)s" msgstr "Updaten van HTML voor artikel %(seq)s" #: Mailman/Archiver/HyperArch.py:1310 msgid "article file %(filename)s is missing!" msgstr "artikelbestand %(filename)s is niet gevonden!" #: Mailman/Archiver/pipermail.py:179 Mailman/Archiver/pipermail.py:180 msgid "No subject" msgstr "Geen onderwerp" #: Mailman/Archiver/pipermail.py:287 msgid "Creating archive directory " msgstr "Aanmaken van archiefmap" #: Mailman/Archiver/pipermail.py:299 msgid "Reloading pickled archive state" msgstr "Herladen van opgeslagen archiefstatus" #: Mailman/Archiver/pipermail.py:326 msgid "Pickling archive state into " msgstr "Opslaan van archiefstatus in " #: Mailman/Archiver/pipermail.py:437 msgid "Updating index files for archive [%(archive)s]" msgstr "Updaten van indexbestanden voor archief [%(archive)s]" #: Mailman/Archiver/pipermail.py:470 msgid " Thread" msgstr " Draad" #: Mailman/Archiver/pipermail.py:577 msgid "#%(counter)05d %(msgid)s" msgstr "#%(counter)05d %(msgid)s" #: Mailman/Bouncer.py:44 msgid "due to excessive bounces" msgstr "door teveel bounces" #: Mailman/Bouncer.py:45 msgid "by yourself" msgstr "door uzelf" #: Mailman/Bouncer.py:46 msgid "by the list administrator" msgstr "door de lijstbeheerder" #: Mailman/Bouncer.py:47 Mailman/Bouncer.py:247 #: Mailman/Commands/cmd_set.py:182 msgid "for unknown reasons" msgstr "om onbekende redenen" #: Mailman/Bouncer.py:194 msgid "disabled" msgstr "uitgezet" #: Mailman/Bouncer.py:199 msgid "Bounce action notification" msgstr "Bounceactiemelding" #: Mailman/Bouncer.py:254 msgid " The last bounce received from you was dated %(date)s" msgstr " De laatste bounce ontvangen van u was gedateerd $(date)s" #: Mailman/Bouncer.py:279 Mailman/Deliverer.py:143 #: Mailman/Handlers/Acknowledge.py:44 Mailman/Handlers/CookHeaders.py:286 #: Mailman/Handlers/Hold.py:215 Mailman/Handlers/ToDigest.py:235 #: Mailman/ListAdmin.py:223 msgid "(no subject)" msgstr "(geen onderwerp)" #: Mailman/Bouncer.py:283 msgid "[No bounce details are available]" msgstr "[Er zijn geen bouncedetails beschikbaar]" #: Mailman/Cgi/Auth.py:46 msgid "Moderator" msgstr "Moderator" #: Mailman/Cgi/Auth.py:48 msgid "Administrator" msgstr "Beheerder" #: Mailman/Cgi/admin.py:75 Mailman/Cgi/admindb.py:90 Mailman/Cgi/confirm.py:62 #: Mailman/Cgi/edithtml.py:70 Mailman/Cgi/listinfo.py:51 #: Mailman/Cgi/options.py:78 Mailman/Cgi/private.py:108 #: Mailman/Cgi/rmlist.py:64 Mailman/Cgi/roster.py:57 #: Mailman/Cgi/subscribe.py:61 msgid "No such list %(safelistname)s" msgstr "Er is geen lijst met de naam %(safelistname)s" #: Mailman/Cgi/admin.py:90 Mailman/Cgi/admindb.py:106 #: Mailman/Cgi/edithtml.py:88 Mailman/Cgi/private.py:133 msgid "Authorization failed." msgstr "Autorisatie mislukt." #: Mailman/Cgi/admin.py:180 msgid "" "You have turned off delivery of both digest and\n" " non-digest messages. This is an incompatible state of\n" " affairs. You must turn on either digest delivery or\n" " non-digest delivery or your mailing list will basically be\n" " unusable." msgstr "" "U heeft het bezorgen van zowel verzamelmail als\n" " losse berichten uitgezet. Deze combinatie is niet geldig.\n" " U moet het gebruik van of verzamelmail of losse berichten " "aanzetten,\n" " anders is de maillijst onbruikbaar." #: Mailman/Cgi/admin.py:184 Mailman/Cgi/admin.py:190 Mailman/Cgi/admin.py:195 #: Mailman/Cgi/admin.py:1441 Mailman/Gui/GUIBase.py:204 msgid "Warning: " msgstr "Waarschuwing: " #: Mailman/Cgi/admin.py:188 msgid "" "You have digest members, but digests are turned\n" " off. Those people will not receive mail." msgstr "" "U heeft de instelling verzamelmail uitgezet, maar er zijn leden die\n" " deze optie gebruiken. Deze leden krijgen nu geen mail bezorgd." #: Mailman/Cgi/admin.py:193 msgid "" "You have regular list members but non-digestified mail is\n" " turned off. They will receive mail until you fix this\n" " problem." msgstr "" "U heeft de bezorging van reguliere mail uitgezet, maar er zijn\n" " leden die deze optie gebruiken. Deze leden zullen mail\n" " ontvangen totdat u het probleem heeft opgelost." #: Mailman/Cgi/admin.py:217 msgid "%(hostname)s mailing lists - Admin Links" msgstr "Beheerlinks van %(hostname)s maillijsten" #: Mailman/Cgi/admin.py:247 Mailman/Cgi/listinfo.py:100 msgid "Welcome!" msgstr "Welkom!" #: Mailman/Cgi/admin.py:250 Mailman/Cgi/listinfo.py:103 msgid "Mailman" msgstr "Mailman" #: Mailman/Cgi/admin.py:254 msgid "" "

There currently are no publicly-advertised %(mailmanlink)s\n" " mailing lists on %(hostname)s." msgstr "" "

Er zijn momenteel geen publieke %(mailmanlink)s\n" " maillijsten op %(hostname)s." #: Mailman/Cgi/admin.py:260 msgid "" "

Below is the collection of publicly-advertised\n" " %(mailmanlink)s mailing lists on %(hostname)s. Click on a list\n" " name to visit the configuration pages for that list." msgstr "" "

Hieronder vind u een lijst van publieke\n" " %(mailmanlink)s maillijsten op %(hostname)s. Klik op een\n" " lijstnaam voor de configuratiepagina's van die lijst. " #: Mailman/Cgi/admin.py:267 msgid "right " msgstr "rechts " #: Mailman/Cgi/admin.py:269 msgid "" "To visit the administrators configuration page for an\n" " unadvertised list, open a URL similar to this one, but with a '/' " "and\n" " the %(extra)slist name appended. If you have the proper authority,\n" " you can also create a new mailing list.\n" "\n" "

General list information can be found at " msgstr "" "Om voor een niet-publieke lijst naar de configuratiepagina te gaan voor " "beheerders\n" " opent u een URL vergelijkbaar als deze, maar dan met een '/' en\n" " de %(extra)slijstnaam toegevoegd. Als u daartoe bevoegd bent\n" " kunt u ook een nieuwe maillijst " "aanmaken.\n" "\n" "

Algemene lijstinformatie is te vinden op " #: Mailman/Cgi/admin.py:276 msgid "the mailing list overview page" msgstr "de maillijst overzichtspagina" #: Mailman/Cgi/admin.py:278 msgid "

(Send questions and comments to " msgstr "

(Voor vragen kunt u terecht bij " #: Mailman/Cgi/admin.py:288 Mailman/Cgi/listinfo.py:135 cron/mailpasswds:216 msgid "List" msgstr "Lijst" #: Mailman/Cgi/admin.py:289 Mailman/Cgi/admin.py:556 #: Mailman/Cgi/listinfo.py:136 msgid "Description" msgstr "Omschrijving" #: Mailman/Cgi/admin.py:295 Mailman/Cgi/listinfo.py:142 bin/list_lists:116 msgid "[no description available]" msgstr "[geen omschrijving beschikbaar]" #: Mailman/Cgi/admin.py:329 msgid "No valid variable name found." msgstr "Geen geldige variabelenaam gevonden." #: Mailman/Cgi/admin.py:339 msgid "" "%(realname)s Mailing list Configuration Help\n" "
%(varname)s Option" msgstr "" "%(realname)s maillijst\n" "
Hulp bij de configuratie van de %(varname)s instelling" #: Mailman/Cgi/admin.py:346 msgid "Mailman %(varname)s List Option Help" msgstr "Hulp bij de Mailman %(varname)s lijstoptie" #: Mailman/Cgi/admin.py:364 msgid "" "Warning: changing this option here\n" " could cause other screens to be out-of-sync. Be sure to reload any " "other\n" " pages that are displaying this option for this mailing list. You can " "also\n" " " msgstr "" "Waarschuwing: als u deze instelling hier\n" " verandert, kan het gebeuren dat deze verandering nog niet in andere\n" " beheersschermen wordt doorgevoerd. Als u dezelfde instelling op andere\n" " pagina's tegenkomt, zorg er dan voor dat u die pagina's eerst\n" " ververst. U kunt ook\n" " " #: Mailman/Cgi/admin.py:375 msgid "return to the %(categoryname)s options page." msgstr "terug naar de %(categoryname)spagina." #: Mailman/Cgi/admin.py:390 msgid "%(realname)s Administration (%(label)s)" msgstr "%(realname)s Beheer (%(label)s)" #: Mailman/Cgi/admin.py:391 msgid "%(realname)s mailing list administration
%(label)s Section" msgstr "%(realname)s maillijstbeheer
%(label)s" #: Mailman/Cgi/admin.py:407 msgid "Configuration Categories" msgstr "Instellingen" #: Mailman/Cgi/admin.py:408 msgid "Other Administrative Activities" msgstr "Overige beheertaken" #: Mailman/Cgi/admin.py:412 msgid "Tend to pending moderator requests" msgstr "Verwerk wachtende moderatorverzoeken" #: Mailman/Cgi/admin.py:414 msgid "Go to the general list information page" msgstr "Ga naar de lijstinformatiepagina" #: Mailman/Cgi/admin.py:416 msgid "Edit the public HTML pages and text files" msgstr "Bewerk de publiek toegankelijke HTML-pagina's en de tekstbestanden" #: Mailman/Cgi/admin.py:418 msgid "Go to list archives" msgstr "Ga naar het archief" #: Mailman/Cgi/admin.py:424 msgid "Delete this mailing list" msgstr "Verwijder deze maillijst" #: Mailman/Cgi/admin.py:425 msgid " (requires confirmation)
 
" msgstr " (bevestiging vereist)
 
" #: Mailman/Cgi/admin.py:431 msgid "Logout" msgstr "Uitloggen" #: Mailman/Cgi/admin.py:475 msgid "Emergency moderation of all list traffic is enabled" msgstr "Noodmoderatie van al het lijstverkeer staat aan" #: Mailman/Cgi/admin.py:486 msgid "" "Make your changes in the following section, then submit them\n" " using the Submit Your Changes button below." msgstr "" "Verander de instellingen en maak ze actief door op de knop\n" " Verstuur de wijzigingen te klikken." #: Mailman/Cgi/admin.py:504 msgid "Additional Member Tasks" msgstr "Aanvullende opties voor ledenbeheer" #: Mailman/Cgi/admin.py:510 msgid "" "

  • Set everyone's moderation bit, including\n" " those members not currently visible" msgstr "" "
  • Moderatie-instelling van alle leden, ook\n" " de leden die momenteel niet zichtbaar zijn" #: Mailman/Cgi/admin.py:514 msgid "Off" msgstr "Uit" #: Mailman/Cgi/admin.py:514 msgid "On" msgstr "Aan" #: Mailman/Cgi/admin.py:516 msgid "Set" msgstr "Stel in" #: Mailman/Cgi/admin.py:557 msgid "Value" msgstr "Waarde" #: Mailman/Cgi/admin.py:611 msgid "" "Badly formed options entry:\n" " %(record)s" msgstr "" "Foute invoerwaarde:\n" " %(record)s" #: Mailman/Cgi/admin.py:669 msgid "Enter the text below, or...
    " msgstr "Voer de tekst hieronder in, of ...
    " #: Mailman/Cgi/admin.py:671 msgid "
    ...specify a file to upload
    " msgstr "
    ... upload een bestand
    " #: Mailman/Cgi/admin.py:697 Mailman/Cgi/admin.py:700 msgid "Topic %(i)d" msgstr "Onderwerp %(i)d" #: Mailman/Cgi/admin.py:701 Mailman/Cgi/admin.py:751 msgid "Delete" msgstr "Wis" #: Mailman/Cgi/admin.py:702 msgid "Topic name:" msgstr "Naam onderwerp:" #: Mailman/Cgi/admin.py:704 msgid "Regexp:" msgstr "Uitdrukking:" #: Mailman/Cgi/admin.py:707 Mailman/Cgi/options.py:1042 msgid "Description:" msgstr "Omschrijving:" #: Mailman/Cgi/admin.py:711 Mailman/Cgi/admin.py:769 msgid "Add new item..." msgstr "Voeg een nieuw item toe ..." #: Mailman/Cgi/admin.py:713 Mailman/Cgi/admin.py:771 msgid "...before this one." msgstr "... voor deze." #: Mailman/Cgi/admin.py:714 Mailman/Cgi/admin.py:772 msgid "...after this one." msgstr "... na deze." #: Mailman/Cgi/admin.py:747 Mailman/Cgi/admin.py:750 msgid "Spam Filter Rule %(i)d" msgstr "Spam filterregel %(i)d" #: Mailman/Cgi/admin.py:752 msgid "Spam Filter Regexp:" msgstr "Uitdrukking:" #: Mailman/Cgi/admin.py:763 Mailman/Cgi/admindb.py:303 #: Mailman/Cgi/admindb.py:362 Mailman/Cgi/admindb.py:407 #: Mailman/Cgi/admindb.py:641 msgid "Defer" msgstr "Uitstellen" #: Mailman/Cgi/admin.py:763 Mailman/Cgi/admindb.py:305 #: Mailman/Cgi/admindb.py:364 Mailman/Cgi/admindb.py:407 #: Mailman/Cgi/admindb.py:641 Mailman/Gui/ContentFilter.py:37 #: Mailman/Gui/Privacy.py:216 Mailman/Gui/Privacy.py:297 msgid "Reject" msgstr "Weigeren" #: Mailman/Cgi/admin.py:763 Mailman/Gui/Privacy.py:216 #: Mailman/Gui/Privacy.py:297 msgid "Hold" msgstr "Vasthouden" #: Mailman/Cgi/admin.py:764 Mailman/Cgi/admindb.py:306 #: Mailman/Cgi/admindb.py:365 Mailman/Cgi/admindb.py:407 #: Mailman/Cgi/admindb.py:641 Mailman/Gui/ContentFilter.py:37 #: Mailman/Gui/Privacy.py:216 Mailman/Gui/Privacy.py:297 msgid "Discard" msgstr "Negeren" #: Mailman/Cgi/admin.py:764 Mailman/Cgi/admindb.py:407 #: Mailman/Gui/Privacy.py:297 msgid "Accept" msgstr "Goedkeuren" #: Mailman/Cgi/admin.py:767 Mailman/Cgi/admindb.py:647 msgid "Action:" msgstr "Actie:" #: Mailman/Cgi/admin.py:779 msgid "Move rule up" msgstr "Verplaats regel naar boven" #: Mailman/Cgi/admin.py:780 msgid "Move rule down" msgstr "Verplaats regel naar beneden" #: Mailman/Cgi/admin.py:813 msgid "
    (Edit %(varname)s)" msgstr "
    (Wijzig %(varname)s)" #: Mailman/Cgi/admin.py:815 msgid "
    (Details for %(varname)s)" msgstr "
    (Details voor %(varname)s)" #: Mailman/Cgi/admin.py:822 msgid "" "
    Note:\n" " setting this value performs an immediate action but does not modify\n" " permanent state." msgstr "" "
    Opmerking:\n" " het instellen van deze waarde zorgt er voor dat de actie meteen\n" " wordt uitgevoerd, maar het verandert niet de vaste instelling." #: Mailman/Cgi/admin.py:836 msgid "Mass Subscriptions" msgstr "Meerdere leden aanmelden" #: Mailman/Cgi/admin.py:843 msgid "Mass Removals" msgstr "Meerdere leden afmelden" #: Mailman/Cgi/admin.py:850 msgid "Membership List" msgstr "Ledenlijst" #: Mailman/Cgi/admin.py:857 msgid "(help)" msgstr "(help)" #: Mailman/Cgi/admin.py:858 msgid "Find member %(link)s:" msgstr "Zoek een lid %(link)s:" #: Mailman/Cgi/admin.py:861 msgid "Search..." msgstr "Zoek ..." #: Mailman/Cgi/admin.py:878 msgid "Bad regular expression: " msgstr "Foute uitdrukking: " #: Mailman/Cgi/admin.py:934 msgid "%(allcnt)s members total, %(membercnt)s shown" msgstr "%(allcnt)s leden in totaal, %(membercnt)s zichtbaar" #: Mailman/Cgi/admin.py:937 msgid "%(allcnt)s members total" msgstr "%(allcnt)s leden in totaal" #: Mailman/Cgi/admin.py:960 msgid "unsub" msgstr "afmelden" #: Mailman/Cgi/admin.py:961 msgid "member address
    member name" msgstr "email-adres
    naam" #: Mailman/Cgi/admin.py:962 msgid "hide" msgstr "verberg" #: Mailman/Cgi/admin.py:962 msgid "mod" msgstr "moderatie" #: Mailman/Cgi/admin.py:963 msgid "nomail
    [reason]" msgstr "mail
    uit" #: Mailman/Cgi/admin.py:964 msgid "ack" msgstr "bevestig" #: Mailman/Cgi/admin.py:964 msgid "not metoo" msgstr "geen
    eigen" #: Mailman/Cgi/admin.py:965 msgid "nodupes" msgstr "geen
    dubbele" #: Mailman/Cgi/admin.py:966 msgid "digest" msgstr "verzamel
    mail" #: Mailman/Cgi/admin.py:966 msgid "plain" msgstr "geen
    MIME" #: Mailman/Cgi/admin.py:967 msgid "language" msgstr "taal" #: Mailman/Cgi/admin.py:978 msgid "?" msgstr "?" #: Mailman/Cgi/admin.py:979 msgid "U" msgstr "L" #: Mailman/Cgi/admin.py:980 msgid "A" msgstr "B" #: Mailman/Cgi/admin.py:981 msgid "B" msgstr "S" #: Mailman/Cgi/admin.py:1053 msgid "unsub -- Click on this to unsubscribe the member." msgstr "afmelden -- Klik hier om het lid af te melden." #: Mailman/Cgi/admin.py:1055 msgid "" "mod -- The user's personal moderation flag. If this is\n" " set, postings from them will be moderated, otherwise they will be\n" " approved." msgstr "" "moderatie -- De moderatie instelling. Als deze\n" " is aangevinkt, worden berichten van de gebruiker vastgehouden ter\n" " goedkeuring; in het andere geval worden ze automatisch goedgekeurd." #: Mailman/Cgi/admin.py:1059 msgid "" "hide -- Is the member's address concealed on\n" " the list of subscribers?" msgstr "" "verberg -- Is het e-mailadres van het lid geheim\n" " i.e. wordt het niet getoond in de ledenlijst?" #: Mailman/Cgi/admin.py:1061 msgid "" "nomail -- Is delivery to the member disabled? If so, an\n" " abbreviation will be given describing the reason for the disabled\n" " delivery:\n" "
    • U -- Delivery was disabled by the user via their\n" " personal options page.\n" "
    • A -- Delivery was disabled by the list\n" " administrators.\n" "
    • B -- Delivery was disabled by the system due to\n" " excessive bouncing from the member's address.\n" "
    • ? -- The reason for disabled delivery isn't " "known.\n" " This is the case for all memberships which were " "disabled\n" " in older versions of Mailman.\n" "
    " msgstr "" "mail uit -- Is de mailbezorging aan het lid uitgezet? In dat\n" " geval wordt een afkorting vermeld die de reden voor het uitzetten\n" " aangeeft:\n" "
    • L -- Het lid heeft op zijn persoonlijke\n" " instellingenpagina de mailbezorging uitgezet.\n" "
    • B -- De beheerder van de lijst heeft de\n" " mailbezorging uitgezet.\n" "
    • S -- Het systeem heeft de mailbezorging\n" " geinactiveerd, vanwege een excessief aantal bounces\n" " van het e-mailadres van het lid.\n" "
    • ? -- Reden onbekend. Dit is het geval als de\n" " mailbezorging reeds uitgezet was in oudere versies\n" " van Mailman.\n" "
    " #: Mailman/Cgi/admin.py:1076 msgid "" "ack -- Does the member get acknowledgements of their\n" " posts?" msgstr "" "bevestig -- Krijgt het lid bevestigingen van\n" " berichten die het naar de lijst stuurt?" #: Mailman/Cgi/admin.py:1079 msgid "" "not metoo -- Does the member want to avoid copies of their\n" " own postings?" msgstr "" "geen eigen -- Wil het lid voorkomen dat het eigen berichten\n" " ontvangt?" #: Mailman/Cgi/admin.py:1082 msgid "" "nodupes -- Does the member want to avoid duplicates of the\n" " same message?" msgstr "" "geen dubbele -- Wil het lid voorkomen dat het dezelfde berichten\n" " dubbel ontvangt?" #: Mailman/Cgi/admin.py:1085 msgid "" "digest -- Does the member get messages in digests?\n" " (otherwise, individual messages)" msgstr "" "verzamelmail -- Krijgt het lid de berichten in verzamelmails?\n" " (in het andere geval: losse berichten)" #: Mailman/Cgi/admin.py:1088 msgid "" "plain -- If getting digests, does the member get plain\n" " text digests? (otherwise, MIME)" msgstr "" "geen MIME -- Als het lid verzamelmails krijgt, zijn dat dan\n" " verzamelmails in gewone tekst? (in het andere geval: MIME)" #: Mailman/Cgi/admin.py:1090 msgid "language -- Language preferred by the user" msgstr "taal -- Voorkeurstaal van de gebruiker" #: Mailman/Cgi/admin.py:1104 msgid "Click here to hide the legend for this table." msgstr "Klik hier om de legenda te verbergen." #: Mailman/Cgi/admin.py:1108 msgid "Click here to include the legend for this table." msgstr "Klik hier om de legenda weer te geven." #: Mailman/Cgi/admin.py:1115 msgid "" "

    To view more members, click on the appropriate\n" " range listed below:" msgstr "" "

    Om meer leden te zien, klik hieronder op de\n" " betreffende reeks-indicatie:" #: Mailman/Cgi/admin.py:1124 msgid "from %(start)s to %(end)s" msgstr "van %(start)s tot %(end)s" #: Mailman/Cgi/admin.py:1137 msgid "Subscribe these users now or invite them?" msgstr "Meld deze leden nu aan of stuur ze een uitnodiging?" #: Mailman/Cgi/admin.py:1139 msgid "Invite" msgstr "Uitnodigen" #: Mailman/Cgi/admin.py:1139 Mailman/Cgi/listinfo.py:178 msgid "Subscribe" msgstr "Aanmelden" #: Mailman/Cgi/admin.py:1145 msgid "Send welcome messages to new subscribees?" msgstr "Stuur een welkomstbericht naar nieuwe leden?" #: Mailman/Cgi/admin.py:1147 Mailman/Cgi/admin.py:1156 #: Mailman/Cgi/admin.py:1189 Mailman/Cgi/admin.py:1197 #: Mailman/Cgi/confirm.py:290 Mailman/Cgi/create.py:352 #: Mailman/Cgi/create.py:387 Mailman/Cgi/create.py:425 #: Mailman/Cgi/rmlist.py:228 Mailman/Gui/Archive.py:33 #: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62 #: Mailman/Gui/Autoresponse.py:71 Mailman/Gui/Bounce.py:77 #: Mailman/Gui/Bounce.py:120 Mailman/Gui/Bounce.py:146 #: Mailman/Gui/Bounce.py:155 Mailman/Gui/ContentFilter.py:74 #: Mailman/Gui/ContentFilter.py:116 Mailman/Gui/ContentFilter.py:120 #: Mailman/Gui/Digest.py:46 Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 #: Mailman/Gui/Digest.py:89 Mailman/Gui/General.py:156 #: Mailman/Gui/General.py:162 Mailman/Gui/General.py:240 #: Mailman/Gui/General.py:267 Mailman/Gui/General.py:294 #: Mailman/Gui/General.py:305 Mailman/Gui/General.py:308 #: Mailman/Gui/General.py:318 Mailman/Gui/General.py:323 #: Mailman/Gui/General.py:329 Mailman/Gui/General.py:349 #: Mailman/Gui/General.py:381 Mailman/Gui/General.py:404 #: Mailman/Gui/NonDigest.py:45 Mailman/Gui/NonDigest.py:53 #: Mailman/Gui/NonDigest.py:140 Mailman/Gui/Privacy.py:110 #: Mailman/Gui/Privacy.py:116 Mailman/Gui/Privacy.py:149 #: Mailman/Gui/Privacy.py:197 Mailman/Gui/Privacy.py:312 #: Mailman/Gui/Privacy.py:331 Mailman/Gui/Usenet.py:52 #: Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 Mailman/Gui/Usenet.py:105 msgid "No" msgstr "Nee" #: Mailman/Cgi/admin.py:1147 Mailman/Cgi/admin.py:1156 #: Mailman/Cgi/admin.py:1189 Mailman/Cgi/admin.py:1197 #: Mailman/Cgi/confirm.py:290 Mailman/Cgi/create.py:352 #: Mailman/Cgi/create.py:387 Mailman/Cgi/create.py:425 #: Mailman/Cgi/rmlist.py:228 Mailman/Gui/Archive.py:33 #: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62 #: Mailman/Gui/Bounce.py:77 Mailman/Gui/Bounce.py:120 #: Mailman/Gui/Bounce.py:146 Mailman/Gui/Bounce.py:155 #: Mailman/Gui/ContentFilter.py:74 Mailman/Gui/ContentFilter.py:116 #: Mailman/Gui/ContentFilter.py:120 Mailman/Gui/Digest.py:46 #: Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 Mailman/Gui/Digest.py:89 #: Mailman/Gui/General.py:156 Mailman/Gui/General.py:162 #: Mailman/Gui/General.py:240 Mailman/Gui/General.py:267 #: Mailman/Gui/General.py:294 Mailman/Gui/General.py:305 #: Mailman/Gui/General.py:308 Mailman/Gui/General.py:318 #: Mailman/Gui/General.py:323 Mailman/Gui/General.py:329 #: Mailman/Gui/General.py:349 Mailman/Gui/General.py:381 #: Mailman/Gui/General.py:404 Mailman/Gui/NonDigest.py:45 #: Mailman/Gui/NonDigest.py:53 Mailman/Gui/NonDigest.py:140 #: Mailman/Gui/Privacy.py:110 Mailman/Gui/Privacy.py:116 #: Mailman/Gui/Privacy.py:149 Mailman/Gui/Privacy.py:197 #: Mailman/Gui/Privacy.py:312 Mailman/Gui/Privacy.py:331 #: Mailman/Gui/Usenet.py:52 Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 #: Mailman/Gui/Usenet.py:105 msgid "Yes" msgstr "Ja" #: Mailman/Cgi/admin.py:1154 msgid "Send notifications of new subscriptions to the list owner?" msgstr "Stuur een melding naar de lijstbeheerder over nieuwe aanmeldingen?" #: Mailman/Cgi/admin.py:1162 Mailman/Cgi/admin.py:1203 msgid "Enter one address per line below..." msgstr "Voer hieronder een adres per regel in ..." #: Mailman/Cgi/admin.py:1167 Mailman/Cgi/admin.py:1208 msgid "...or specify a file to upload:" msgstr "... of upload een bestand:" #: Mailman/Cgi/admin.py:1172 msgid "" "Below, enter additional text to be added to the\n" " top of your invitation or the subscription notification. Include at " "least\n" " one blank line at the end..." msgstr "" "Voer hieronder een aanvullende tekst in die\n" " wordt toegevoegd bovenin uw uitnodiging of het aanmeldingsbericht.\n" " Voeg tenminste een lege regel toe aan het eind ..." #: Mailman/Cgi/admin.py:1187 msgid "Send unsubscription acknowledgement to the user?" msgstr "Stuur een afmeldingsbericht naar de gebruiker?" #: Mailman/Cgi/admin.py:1195 msgid "Send notifications to the list owner?" msgstr "Verstuur meldingen naar de lijstbeheerder?" #: Mailman/Cgi/admin.py:1217 msgid "Change list ownership passwords" msgstr "Verander de lijstbeheerderswachtwoorden" #: Mailman/Cgi/admin.py:1220 msgid "" "The list administrators are the people who have ultimate control " "over\n" "all parameters of this mailing list. They are able to change any list\n" "configuration variable available through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions; they are not\n" "able to change any list configuration variable, but they are allowed to " "tend\n" "to pending administration requests, including approving or rejecting held\n" "subscription requests, and disposing of held postings. Of course, the\n" "list administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into administrators and\n" "moderators, you must set a separate moderator password in the fields below,\n" "and also provide the email addresses of the list moderators in the\n" "general options section." msgstr "" "De lijstbeheerders zijn de personen die de volledige zeggenschap " "hebben\n" "over alle instellingsmogelijkheden van deze maillijst. Zij kunnen elke\n" "instellingsvariabele veranderen door middel van deze beheerpagina's.\n" "\n" "

    De lijstmoderatoren hebben beperktere bevoegdheden. Zij kunnen\n" "geen veranderingen in de instellingen van de lijst aanbrengen, maar zij " "mogen wel\n" "wachtende administratieve verzoeken verwerken, zoals het goedkeuren of " "weigeren van\n" "aanmeldingsverzoeken, en beslissen over wachtende berichten. Natuurlijk\n" "kunnen ook de lijstbeheerders wachtende verzoeken verwerken.\n" "\n" "

    Om de lijsttaken te verdelen onder beheerders en moderatoren,\n" "moet u een apart moderatorwachtwoord instellen in de velden hieronder, en\n" "ook de e-mailadressen van de lijstmoderatoren invullen in de\n" "configuratiecategorie Algemene " "instellingen." #: Mailman/Cgi/admin.py:1239 msgid "Enter new administrator password:" msgstr "Voer het nieuwe beheerderswachtwoord in:" #: Mailman/Cgi/admin.py:1241 msgid "Confirm administrator password:" msgstr "Bevestig het beheerderswachtwoord" #: Mailman/Cgi/admin.py:1246 msgid "Enter new moderator password:" msgstr "Voer het nieuwe moderatorwachtwoord in:" #: Mailman/Cgi/admin.py:1248 msgid "Confirm moderator password:" msgstr "Bevestig het moderatorwachtwoord:" #: Mailman/Cgi/admin.py:1258 msgid "Submit Your Changes" msgstr "Verstuur de wijzigingen" #: Mailman/Cgi/admin.py:1281 msgid "Moderator passwords did not match" msgstr "Moderatorwachtwoorden kwamen niet overeen" #: Mailman/Cgi/admin.py:1291 msgid "Administrator passwords did not match" msgstr "Beheerderswachtwoorden kwamen niet overeen" #: Mailman/Cgi/admin.py:1341 msgid "Already a member" msgstr "Is al lid" #: Mailman/Cgi/admin.py:1344 msgid "<blank line>" msgstr "<lege regel>" #: Mailman/Cgi/admin.py:1345 Mailman/Cgi/admin.py:1348 msgid "Bad/Invalid email address" msgstr "Ongeldig e-mailadres" #: Mailman/Cgi/admin.py:1351 msgid "Hostile address (illegal characters)" msgstr "Verdacht adres (niet toegestane lettertekens)" #: Mailman/Cgi/admin.py:1354 bin/add_members:140 bin/clone_member:136 #: bin/sync_members:264 msgid "Banned address (matched %(pattern)s)" msgstr "Verboden adres (komt overeen met %(pattern)s)" #: Mailman/Cgi/admin.py:1360 msgid "Successfully invited:" msgstr "Met succes uitgenodigd:" #: Mailman/Cgi/admin.py:1362 msgid "Successfully subscribed:" msgstr "Met succes aangemeld:" #: Mailman/Cgi/admin.py:1367 msgid "Error inviting:" msgstr "Fout bij het uitnodigen:" #: Mailman/Cgi/admin.py:1369 msgid "Error subscribing:" msgstr "Fout bij het aanmelden:" #: Mailman/Cgi/admin.py:1398 msgid "Successfully Unsubscribed:" msgstr "Met succes afgemeld:" #: Mailman/Cgi/admin.py:1403 msgid "Cannot unsubscribe non-members:" msgstr "Kan niet-leden niet afmelden:" #: Mailman/Cgi/admin.py:1415 msgid "Bad moderation flag value" msgstr "Verkeerde moderatie-instelling:" #: Mailman/Cgi/admin.py:1437 msgid "Not subscribed" msgstr "Niet aangemeld" #: Mailman/Cgi/admin.py:1440 msgid "Ignoring changes to deleted member: %(user)s" msgstr "Negeer wijzigingen voor verwijderd lid: %(user)s" #: Mailman/Cgi/admin.py:1480 msgid "Successfully Removed:" msgstr "Met succes verwijderd:" #: Mailman/Cgi/admin.py:1484 msgid "Error Unsubscribing:" msgstr "Fout bij afmelden:" #: Mailman/Cgi/admindb.py:160 Mailman/Cgi/admindb.py:168 msgid "%(realname)s Administrative Database" msgstr "%(realname)s Beheerdatabase" #: Mailman/Cgi/admindb.py:163 msgid "%(realname)s Administrative Database Results" msgstr "%(realname)s Beheerdatabaseresultaten" #: Mailman/Cgi/admindb.py:171 msgid "There are no pending requests." msgstr "Er zijn geen wachtende verzoeken." #: Mailman/Cgi/admindb.py:174 msgid "Click here to reload this page." msgstr "Klik hier om deze pagina te verversen." #: Mailman/Cgi/admindb.py:185 msgid "Detailed instructions for the administrative database" msgstr "Gedetailleerde instructies voor de beheerdatabase" #: Mailman/Cgi/admindb.py:189 msgid "Administrative requests for mailing list:" msgstr "Administratieve verzoeken voor maillijst:" #: Mailman/Cgi/admindb.py:192 Mailman/Cgi/admindb.py:248 msgid "Submit All Data" msgstr "Verstuur de wijzigingen" #: Mailman/Cgi/admindb.py:198 Mailman/Cgi/admindb.py:246 msgid "Discard all messages marked Defer" msgstr "Negeer alle berichten die gemarkeerd zijn met Uitstellen" #: Mailman/Cgi/admindb.py:212 msgid "all of %(esender)s's held messages." msgstr "alle vastgehouden berichten van %(esender)s." #: Mailman/Cgi/admindb.py:217 msgid "a single held message." msgstr "��n vastgehouden bericht." #: Mailman/Cgi/admindb.py:222 msgid "all held messages." msgstr "alle vastgehouden berichten." #: Mailman/Cgi/admindb.py:263 msgid "Mailman Administrative Database Error" msgstr "Mailman beheerdatabasefout" #: Mailman/Cgi/admindb.py:268 msgid "list of available mailing lists." msgstr "lijst van beschikbare maillijsten." #: Mailman/Cgi/admindb.py:269 msgid "You must specify a list name. Here is the %(link)s" msgstr "U moet een lijstnaam specificeren. Hier is de %(link)s" #: Mailman/Cgi/admindb.py:282 msgid "Subscription Requests" msgstr "Aanmeldingsverzoeken" #: Mailman/Cgi/admindb.py:284 msgid "Address/name" msgstr "Adres/naam" #: Mailman/Cgi/admindb.py:285 Mailman/Cgi/admindb.py:336 msgid "Your decision" msgstr "Uw beslissing" #: Mailman/Cgi/admindb.py:286 Mailman/Cgi/admindb.py:337 msgid "Reason for refusal" msgstr "Reden voor weigering" #: Mailman/Cgi/admindb.py:304 Mailman/Cgi/admindb.py:363 #: Mailman/Cgi/admindb.py:641 msgid "Approve" msgstr "Goedkeuren" #: Mailman/Cgi/admindb.py:314 msgid "Permanently ban from this list" msgstr "Permanent verbod voor deze lijst" #: Mailman/Cgi/admindb.py:335 msgid "User address/name" msgstr "Gebruikersadres/naam" #: Mailman/Cgi/admindb.py:375 msgid "Unsubscription Requests" msgstr "Afmeldingsverzoeken" #: Mailman/Cgi/admindb.py:387 msgid "Held Messages" msgstr "Vastgehouden berichten" #: Mailman/Cgi/admindb.py:400 Mailman/Cgi/admindb.py:624 msgid "From:" msgstr "Van:" #: Mailman/Cgi/admindb.py:403 msgid "Action to take on all these held messages:" msgstr "Te ondernemen actie op al deze vastgehouden berichten:" #: Mailman/Cgi/admindb.py:415 msgid "Preserve messages for the site administrator" msgstr "Bewaar berichten voor de lijstbeheerder" #: Mailman/Cgi/admindb.py:421 msgid "Forward messages (individually) to:" msgstr "Stuur de berichten (afzonderlijk) door naar:" #: Mailman/Cgi/admindb.py:439 msgid "Clear this member's moderate flag" msgstr "Hef de moderatie-instelling van dit lid op" #: Mailman/Cgi/admindb.py:443 msgid "The sender is now a member of this list" msgstr "De afzender is nu lid van deze lijst" #: Mailman/Cgi/admindb.py:452 msgid "Add %(esender)s to one of these sender filters:" msgstr "Voeg %(esender)s toe aan een van deze afzenderfilters:" #: Mailman/Cgi/admindb.py:457 msgid "Accepts" msgstr "Goedkeuren" #: Mailman/Cgi/admindb.py:457 msgid "Discards" msgstr "Negeren" #: Mailman/Cgi/admindb.py:457 msgid "Holds" msgstr "Vasthouden" #: Mailman/Cgi/admindb.py:457 msgid "Rejects" msgstr "Weigeren" #: Mailman/Cgi/admindb.py:466 msgid "" "Ban %(esender)s from ever subscribing to this\n" " mailing list" msgstr "" "Verbied %(esender)s om zich ooit aan te melden op deze\n" " maillijst" #: Mailman/Cgi/admindb.py:471 msgid "" "Click on the message number to view the individual\n" " message, or you can " msgstr "" "Klik op het berichtnummer om het bericht te bekijken,\n" " of u kunt " #: Mailman/Cgi/admindb.py:473 msgid "view all messages from %(esender)s" msgstr "alle berichten bekijken van %(esender)s" #: Mailman/Cgi/admindb.py:495 Mailman/Cgi/admindb.py:627 msgid "Subject:" msgstr "Onderwerp:" #: Mailman/Cgi/admindb.py:498 msgid " bytes" msgstr " bytes" #: Mailman/Cgi/admindb.py:498 msgid "Size:" msgstr "Grootte:" #: Mailman/Cgi/admindb.py:502 Mailman/Handlers/Scrubber.py:221 #: Mailman/Handlers/Scrubber.py:318 Mailman/Handlers/Scrubber.py:320 msgid "not available" msgstr "niet beschikbaar" #: Mailman/Cgi/admindb.py:503 Mailman/Cgi/admindb.py:630 msgid "Reason:" msgstr "Reden:" #: Mailman/Cgi/admindb.py:507 Mailman/Cgi/admindb.py:634 msgid "Received:" msgstr "Ontvangen:" #: Mailman/Cgi/admindb.py:565 msgid "Posting Held for Approval" msgstr "Bericht vastgehouden voor goedkeuring" #: Mailman/Cgi/admindb.py:567 msgid " (%(count)d of %(total)d)" msgstr " (%(count)d van %(total)d)" #: Mailman/Cgi/admindb.py:578 msgid "Message with id #%(id)d was lost." msgstr "Bericht met id #%(id)d was verloren." #: Mailman/Cgi/admindb.py:587 msgid "Message with id #%(id)d is corrupted." msgstr "Bericht met id #%(id)d is beschadigd." #: Mailman/Cgi/admindb.py:651 msgid "Preserve message for site administrator" msgstr "Bewaar het bericht voor de site-beheerder" #: Mailman/Cgi/admindb.py:655 msgid "Additionally, forward this message to: " msgstr "Stuur het bericht bovendien door naar: " #: Mailman/Cgi/admindb.py:659 msgid "[No explanation given]" msgstr "[Geen uitleg gegeven]" #: Mailman/Cgi/admindb.py:661 msgid "If you reject this post,
    please explain (optional):" msgstr "Als u dit bericht weigert,
    leg dan uit waarom (optioneel):" #: Mailman/Cgi/admindb.py:667 msgid "Message Headers:" msgstr "Bericht headers:" #: Mailman/Cgi/admindb.py:672 msgid "Message Excerpt:" msgstr "Bericht inhoud:" #: Mailman/Cgi/admindb.py:712 Mailman/Deliverer.py:141 msgid "No reason given" msgstr "Geen reden opgegeven" #: Mailman/Cgi/admindb.py:774 Mailman/ListAdmin.py:296 #: Mailman/ListAdmin.py:414 msgid "[No reason given]" msgstr "[Geen reden opgegeven]" #: Mailman/Cgi/admindb.py:806 msgid "Database Updated..." msgstr "Database bijgewerkt ..." #: Mailman/Cgi/admindb.py:809 msgid " is already a member" msgstr " is al lid" #: Mailman/Cgi/admindb.py:812 msgid "%(addr)s is banned (matched: %(patt)s)" msgstr "%(addr)s is verboden (komt overeen met: %(patt)s)" #: Mailman/Cgi/confirm.py:76 msgid "Confirmation string was empty." msgstr "De bevestigingscode was niet ingevuld." #: Mailman/Cgi/confirm.py:96 msgid "" "Invalid confirmation string:\n" " %(safecookie)s.\n" "\n" "

    Note that confirmation strings expire approximately\n" " %(days)s days after the initial subscription request. If your\n" " confirmation has expired, please try to re-submit your subscription.\n" " Otherwise, re-enter your confirmation\n" " string." msgstr "" "Geen geldige bevestigingscode:\n" " %(safecookie)s.\n" "\n" "

    Opmerking: Bevestigingscodes zijn geldig tot ca. %(days)s\n" " dagen na het aanvankelijke aanmeldingsverzoek. Als deze\n" " periode is verlopen, probeer dan uzelf s.v.p. opnieuw aan te melden.\n" " Is dat niet het geval, voer dan hier uw\n" " bevestigingscode opnieuw in." #: Mailman/Cgi/confirm.py:129 msgid "" "The address requesting unsubscription is not\n" " a member of the mailing list. Perhaps you have already " "been\n" " unsubscribed, e.g. by the list administrator?" msgstr "" "Het adres waarvoor de afmelding wordt aangevraagd is geen\n" " lid van de maillijst. Misschien bent u al afgemeld,\n" " b.v. door de lijstbeheerder?" #: Mailman/Cgi/confirm.py:145 msgid "" "The address requesting to be changed has\n" " been subsequently unsubscribed. This request has been\n" " cancelled." msgstr "" "Het te wijzigen adres is op een later tijdstip afgemeld.\n" " Dit wijzigingsverzoek is derhalve geannuleerd." #: Mailman/Cgi/confirm.py:165 msgid "System error, bad content: %(content)s" msgstr "Systeemfout, verkeerde inhoud: %(content)s" #: Mailman/Cgi/confirm.py:175 msgid "Bad confirmation string" msgstr "Verkeerde bevestigingscode" #: Mailman/Cgi/confirm.py:194 msgid "Enter confirmation cookie" msgstr "Voer de bevestigingscode in" #: Mailman/Cgi/confirm.py:207 msgid "" "Please enter the confirmation string\n" " (i.e. cookie) that you received in your email message, in the " "box\n" " below. Then hit the Submit button to proceed to the next\n" " confirmation step." msgstr "" "Voer de door u ontvangen bevestigingscode in in het onderstaande\n" " invoerveld. Druk vervolgens op de button Verstuur om door\n" " te gaan naar de volgende bevestigingsstap." #: Mailman/Cgi/confirm.py:212 msgid "Confirmation string:" msgstr "Bevestigingscode:" #: Mailman/Cgi/confirm.py:214 msgid "Submit" msgstr "Verstuur" #: Mailman/Cgi/confirm.py:231 msgid "Confirm subscription request" msgstr "Bevestig het aanmeldingsverzoek" #: Mailman/Cgi/confirm.py:246 msgid "" "Your confirmation is required in order to complete the\n" " subscription request to the mailing list %(listname)s. Your\n" " subscription settings are shown below; make any necessary changes and " "hit\n" " Subscribe to complete the confirmation process. Once you've\n" " confirmed your subscription request, you will be shown your account\n" " options page which you can use to further customize your membership\n" " options.\n" "\n" "

    Note: your password will be emailed to you once your subscription is\n" " confirmed. You can change it by visiting your personal options page.\n" "\n" "

    Or hit Cancel my subscription request if you no longer want " "to\n" " subscribe to this list." msgstr "" "Uw bevestiging is vereist om het aanmeldingsverzoek voor de maillijst\n" " %(listname)s te voltooien. De door u gewenste instellingen\n" " zijn hieronder weergegeven; maak hierin nodige wijzigingen en klik op\n" " Aanmelden om de bevestigingsprocedure te voltooien. Nadat u\n" " dit heeft gedaan, wordt uw persoonlijke instellingenpagina getoond\n" " waar u uw instellingen verder aan kunt passen.\n" "\n" "

    Opmerking: uw wachtwoord zal naar u gemaild worden zodra uw " "aanmelding\n" " is bevestigd. U kunt het veranderen op uw persoonlijke " "instellingenpagina.\n" "\n" "

    Als u geen lid wil worden, klik op Aanmelding annuleren." #: Mailman/Cgi/confirm.py:261 msgid "" "Your confirmation is required in order to continue with\n" " the subscription request to the mailing list %(listname)s.\n" " Your subscription settings are shown below; make any necessary " "changes\n" " and hit Subscribe to list ... to complete the confirmation\n" " process. Once you've confirmed your subscription request, the\n" " moderator must approve or reject your membership request. You will\n" " receive notice of their decision.\n" "\n" "

    Note: your password will be emailed to you once your " "subscription\n" " is confirmed. You can change it by visiting your personal options\n" " page.\n" "\n" "

    Or, if you've changed your mind and do not want to subscribe to\n" " this mailing list, you can hit Cancel my subscription\n" " request." msgstr "" "Uw bevestiging is vereist alvorens uw aanmeldingsverzoek voor de maillijst\n" " %(listname)s kan worden verwerkt. Uw " "lidmaatschapsinstellingen\n" " zijn hieronder weergegeven; maak hierin nodige wijzigingen en klik " "op\n" " Aanmelden om de bevestigingsprocedure te voltooien.\n" " Nadat u uw aanmeldingsverzoek heeft bevestigd, moet de moderator uw\n" " verzoek goedkeuren of weigeren. U krijgt nog bericht over deze " "beslissing.\n" "\n" "

    Opmerking: uw wachtwoord zal naar u gemaild worden zodra uw " "aanmelding\n" " is bevestigd. U kunt het veranderen op uw persoonlijke " "instellingenpagina.\n" "\n" "

    Mocht u van gedachten zijn veranderd en geen lid willen worden van " "de\n" " maillijst, klik dan op Aanmelding annuleren." #: Mailman/Cgi/confirm.py:279 msgid "Your email address:" msgstr "Uw e-mailadres:" #: Mailman/Cgi/confirm.py:280 msgid "Your real name:" msgstr "Uw volledige naam:" #: Mailman/Cgi/confirm.py:289 msgid "Receive digests?" msgstr "Wilt u verzamelmails ontvangen?" #: Mailman/Cgi/confirm.py:298 msgid "Preferred language:" msgstr "Taalvoorkeur:" #: Mailman/Cgi/confirm.py:303 msgid "Cancel my subscription request" msgstr "Aanmelding annuleren" #: Mailman/Cgi/confirm.py:304 msgid "Subscribe to list %(listname)s" msgstr "Aanmelden op maillijst %(listname)s" #: Mailman/Cgi/confirm.py:321 msgid "You have canceled your subscription request." msgstr "U heeft uw aanmeldingsverzoek geannuleerd." #: Mailman/Cgi/confirm.py:359 msgid "Awaiting moderator approval" msgstr "Wachtend op moderatorgoedkeuring." #: Mailman/Cgi/confirm.py:362 msgid "" " You have successfully confirmed your subscription request to " "the\n" " mailing list %(listname)s, however final approval is required " "from\n" " the list moderator before you will be subscribed. Your request\n" " has been forwarded to the list moderator, and you will be " "notified\n" " of the moderator's decision." msgstr "" " U heeft met succes uw aanmeldingsverzoek voor de maillijst\n" " %(listname)s bevestigd. De lijstmoderator moet uw aanmelding\n" " echter nog definitief goedkeuren. Uw verzoek is naar de " "moderator\n" " doorgestuurd, die u over de beslissing zal informeren." #: Mailman/Cgi/confirm.py:369 Mailman/Cgi/confirm.py:434 #: Mailman/Cgi/confirm.py:523 Mailman/Cgi/confirm.py:758 msgid "" "Invalid confirmation string. It is\n" " possible that you are attempting to confirm a request for an\n" " address that has already been unsubscribed." msgstr "" "Foute bevestigingscode. Mogelijkerwijs\n" " probeert u een verzoek te bevestigen voor een adres dat reeds\n" " is afgemeld." #: Mailman/Cgi/confirm.py:373 msgid "You are already a member of this mailing list!" msgstr "U bent al lid van deze maillijst!" #: Mailman/Cgi/confirm.py:376 msgid "" "You are currently banned from subscribing to\n" " this list. If you think this restriction is erroneous, please\n" " contact the list owners at %(owneraddr)s." msgstr "" "Voor het door u opgegeven e-mailadres is een verbod\n" " ingesteld voor deze maillijst. Als u denkt dat dit een\n" " vergissing is kunt u contact opnemen met de\n" " lijsteigenaren: %(owneraddr)s." #: Mailman/Cgi/confirm.py:380 msgid "" " You were not invited to this mailing list. The invitation has\n" " been discarded, and both list administrators have been\n" " alerted." msgstr "" " U was niet uitgenodigd voor deelname aan deze maillijst. De\n" " uitnodiging wordt genegeerd, en de lijstbeheerders zijn\n" " gewaarschuwd." #: Mailman/Cgi/confirm.py:390 msgid "Subscription request confirmed" msgstr "Aanmeldingsverzoek bevestigd" #: Mailman/Cgi/confirm.py:394 msgid "" " You have successfully confirmed your subscription request for\n" " \"%(addr)s\" to the %(listname)s mailing list. A separate\n" " confirmation message will be sent to your email address, along\n" " with your password, and other useful information and links.\n" "\n" "

    You can now\n" " proceed to your membership login\n" " page." msgstr "" " U heeft met succes uw aanmeldingsverzoek voor\n" " \"%(addr)s\" bij de maillijst %(listname)s bevestigd. Een\n" " bevestigingsbericht zal naar uw e-mailadres worden gestuurd,\n" " met daarin uw wachtwoord, en andere nuttige informatie en " "links.\n" "\n" "

    U kunt nu doorgaan naar uw\n" " lidmaatschap-inlogpagina." #: Mailman/Cgi/confirm.py:412 msgid "You have canceled your unsubscription request." msgstr "U heeft uw afmeldingsverzoek geannuleerd." #: Mailman/Cgi/confirm.py:440 msgid "Unsubscription request confirmed" msgstr "Afmeldingsverzoek is bevestigd" #: Mailman/Cgi/confirm.py:444 msgid "" " You have successfully unsubscribed from the %(listname)s " "mailing\n" " list. You can now visit the list's " "main\n" " information page." msgstr "" " U heeft zich met succes afgemeld van de %(listname)s maillijst.\n" " U kunt nu de informatiepagina van " "de\n" " maillijst bezoeken." #: Mailman/Cgi/confirm.py:455 msgid "Confirm unsubscription request" msgstr "Bevestig afmeldingsverzoek" #: Mailman/Cgi/confirm.py:470 Mailman/Cgi/confirm.py:572 msgid "Not available" msgstr "Niet beschikbaar" #: Mailman/Cgi/confirm.py:473 msgid "" "Your confirmation is required in order to complete the\n" " unsubscription request from the mailing list %(listname)s. " "You\n" " are currently subscribed with\n" "\n" "

    • Real name: %(fullname)s\n" "
    • Email address: %(addr)s\n" "
    \n" "\n" " Hit the Unsubscribe button below to complete the confirmation\n" " process.\n" "\n" "

    Or hit Cancel and discard to cancel this unsubscription\n" " request." msgstr "" "Uw bevestiging is vereist om uw afmeldingsverzoek voor de maillijst\n" " %(listname)s te voltooien. U bent op dit moment\n" " aangemeld met\n" "\n" "

    • Naam: %(fullname)s\n" "
    • E-mailadres: %(addr)s\n" "
    \n" "\n" " Klik op de onderstaande button Afmelden om de bevestiging\n" " te voltooien.\n" "\n" "

    Of klik op Annuleer en negeer om uw afmeldingsverzoek in\n" " te trekken." #: Mailman/Cgi/confirm.py:489 Mailman/Cgi/options.py:756 #: Mailman/Cgi/options.py:900 Mailman/Cgi/options.py:910 msgid "Unsubscribe" msgstr "Afmelden" #: Mailman/Cgi/confirm.py:490 Mailman/Cgi/confirm.py:601 msgid "Cancel and discard" msgstr "Annuleer en negeer" #: Mailman/Cgi/confirm.py:500 msgid "You have canceled your change of address request." msgstr "U hebt uw adreswijzigingsverzoek geannuleerd." #: Mailman/Cgi/confirm.py:529 msgid "" "%(newaddr)s is banned from subscribing to the\n" " %(realname)s list. If you think this restriction is erroneous,\n" " please contact the list owners at %(owneraddr)s." msgstr "" "Voor %(newaddr)s is een aanmeldingsverbod ingesteld\n" " voor de %(realname)s maillijst. Als u denkt dat dit een\n" " vergissing is kunt u contact opnemen met de lijsteigenaren:\n" " %(owneraddr)s." #: Mailman/Cgi/confirm.py:534 #, fuzzy msgid "" "%(newaddr)s is already a member of\n" " the %(realname)s list. It is possible that you are attempting\n" " to confirm a request for an address that has already been\n" " subscribed." msgstr "" "Foute bevestigingscode. Mogelijkerwijs\n" " probeert u een verzoek te bevestigen voor een adres dat reeds\n" " is afgemeld." #: Mailman/Cgi/confirm.py:541 msgid "Change of address request confirmed" msgstr "Adreswijzigingsverzoek bevestigd" #: Mailman/Cgi/confirm.py:545 msgid "" " You have successfully changed your address on the %(listname)s\n" " mailing list from %(oldaddr)s to %(newaddr)s. " "You\n" " can now proceed to your membership\n" " login page." msgstr "" " U heeft met succes uw adres voor de %(listname)s maillijst\n" " veranderd van %(oldaddr)s naar %(newaddr)s.\n" " U kunt nu doorgaan naar uw\n" " lidmaatschap-inlogpagina." #: Mailman/Cgi/confirm.py:557 msgid "Confirm change of address request" msgstr "Bevestig adreswijzigingsverzoek" #: Mailman/Cgi/confirm.py:576 msgid "globally" msgstr "in alle lijsten" #: Mailman/Cgi/confirm.py:579 msgid "" "Your confirmation is required in order to complete the\n" " change of address request for the mailing list %(listname)s. " "You\n" " are currently subscribed with\n" "\n" "

    • Real name: %(fullname)s\n" "
    • Old email address: %(oldaddr)s\n" "
    \n" "\n" " and you have requested to %(globallys)s change your email address to\n" "\n" "
    • New email address: %(newaddr)s\n" "
    \n" "\n" " Hit the Change address button below to complete the " "confirmation\n" " process.\n" "\n" "

    Or hit Cancel and discard to cancel this change of address\n" " request." msgstr "" "Uw bevestiging is vereist om uw adreswijzigingsverzoek voor\n" " de maillijst %(listname)s te voltooien. U bent op dit moment\n" " aangemeld met\n" "\n" "

    • Naam: %(fullname)s\n" "
    • Oude e-mailadres: %(oldaddr)s\n" "
    \n" "\n" " en u heeft verzocht dit e-mailadres %(globallys)s te veranderen naar\n" "\n" "
    • Nieuw e-mailadres: %(newaddr)s\n" "
    \n" "\n" " Klik op de onderstaande button Wijzig adres om dit te " "bevestigen.\n" "\n" "

    Of klik op Annuleren en negeren om dit " "adreswijzigingsverzoek\n" " in te trekken." #: Mailman/Cgi/confirm.py:600 msgid "Change address" msgstr "Verander adres" #: Mailman/Cgi/confirm.py:609 Mailman/Cgi/confirm.py:723 msgid "Continue awaiting approval" msgstr "Continueer goedkeuring" #: Mailman/Cgi/confirm.py:617 msgid "" "Okay, the list moderator will still have the\n" " opportunity to approve or reject this message." msgstr "" "OK, de lijstmoderator heeft nog steeds de gelegenheid om\n" " dit bericht goed te keuren of te weigeren." #: Mailman/Cgi/confirm.py:643 msgid "Sender discarded message via web." msgstr "Afzender heeft bericht geannuleerd via het web." #: Mailman/Cgi/confirm.py:645 msgid "" "The held message with the Subject:\n" " header %(subject)s could not be found. The most " "likely\n" " reason for this is that the list moderator has already approved " "or\n" " rejected the message. You were not able to cancel it in\n" " time." msgstr "" "Het vastgehouden bericht met het onderwerp\n" " %(subject)s is niet gevonden. Hoogstwaarschijnlijk\n" " heeft de lijstmoderator het bericht reeds goedgekeurd of\n" " geweigerd. U was daardoor niet op tijd om het bericht nog te\n" " kunnen annuleren." #: Mailman/Cgi/confirm.py:653 msgid "Posted message canceled" msgstr "Geposte bericht geannuleerd" #: Mailman/Cgi/confirm.py:656 msgid "" " You have successfully canceled the posting of your message with\n" " the Subject: header %(subject)s to the mailing list\n" " %(listname)s." msgstr "" " U heeft met succes het door u geposte bericht met het\n" " onderwerp %(subject)s aan de maillijst %(listname)s\n" " kunnen annuleren." #: Mailman/Cgi/confirm.py:667 msgid "Cancel held message posting" msgstr "Annuleer vastgehouden bericht" #: Mailman/Cgi/confirm.py:692 msgid "" "The held message you were referred to has\n" " already been handled by the list administrator." msgstr "" "Het vastgehouden bericht waarnaar u werd verwezen is reeds\n" " verwerkt door de lijstbeheerder." #: Mailman/Cgi/confirm.py:706 msgid "" "Your confirmation is required in order to cancel the\n" " posting of your message to the mailing list %(listname)s:\n" "\n" "

    • Sender: %(sender)s\n" "
    • Subject: %(subject)s\n" "
    • Reason: %(reason)s\n" "
    \n" "\n" " Hit the Cancel posting button to discard the posting.\n" "\n" "

    Or hit the Continue awaiting approval button to continue to\n" " allow the list moderator to approve or reject the message." msgstr "" "U bevestiging is vereist om het volgende door u geposte bericht naar de\n" " maillijst %(listname)s te annuleren:\n" "\n" "

    • Afzender: %(sender)s\n" "
    • Onderwerp: %(subject)s\n" "
    • Reden: %(reason)s\n" "
    \n" "\n" " Klik op de button Annuleer geposte bericht om het te " "annuleren.\n" "\n" "

    Of klik op de button Continueer goedkeuring om de\n" " lijstmoderator het bericht te doen goedkeuren of weigeren." #: Mailman/Cgi/confirm.py:722 msgid "Cancel posting" msgstr "Annuleer geposte bericht" #: Mailman/Cgi/confirm.py:734 msgid "" "You have canceled the re-enabling of your membership. If\n" " we continue to receive bounces from your address, it could be deleted " "from\n" " this mailing list." msgstr "" "U heeft de reactivering van uw lidmaatschap geannuleerd. Als\n" " wij bounces blijven ontvangen van uw adres, kan het mogelijk uit deze\n" " maillijst worden verwijderd." #: Mailman/Cgi/confirm.py:764 msgid "Membership re-enabled." msgstr "Lidmaatschap gereactiveerd." #: Mailman/Cgi/confirm.py:768 msgid "" " You have successfully re-enabled your membership in the\n" " %(listname)s mailing list. You can now visit your member options page.\n" " " msgstr "" " U heeft uw lidmaatschap van de %(listname)s maillijst met\n" " succes gereactiveerd. U kunt nu uw lidmaatschap-instellingenpagina " "bezoeken.\n" " " #: Mailman/Cgi/confirm.py:780 msgid "Re-enable mailing list membership" msgstr "Reactiveer lidmaatschap" #: Mailman/Cgi/confirm.py:797 msgid "" "We're sorry, but you have already been unsubscribed\n" " from this mailing list. To re-subscribe, please visit the\n" " list information page." msgstr "" "Sorry, u bent reeds afgemeld van\n" " deze maillijst. Om u opnieuw aan te melden, bezoek de\n" " lijstinformatiepagina." #: Mailman/Cgi/confirm.py:812 msgid "not available" msgstr "niet beschikbaar" #: Mailman/Cgi/confirm.py:816 msgid "" "Your membership in the %(realname)s mailing list is\n" " currently disabled due to excessive bounces. Your confirmation is\n" " required in order to re-enable delivery to your address. We have the\n" " following information on file:\n" "\n" "

    • Member address: %(member)s\n" "
    • Member name: %(username)s\n" "
    • Last bounce received on: %(date)s\n" "
    • Approximate number of days before you are permanently " "removed\n" " from this list: %(daysleft)s\n" "
    \n" "\n" " Hit the Re-enable membership button to resume receiving " "postings\n" " from the mailing list. Or hit the Cancel button to defer\n" " re-enabling your membership.\n" " " msgstr "" "Uw lidmaatschap van de %(realname)s maillijst is tijdelijk stopgezet\n" " vanwege een excessief aantal bounces. Om uw lidmaatschap te\n" " continueren is een bevestiging van u vereist. Wij hebben de\n" " volgende informatie opgeslagen:\n" "\n" "
    • Uw e-mailadres: %(member)s\n" "
    • Uw naam: %(username)s\n" "
    • Laatste bounce ontvangen op: %(date)s\n" "
    • Geschat aantal dagen voordat u definitief van deze\n" " lijst wordt verwijderd: %(daysleft)s\n" "
    \n" "\n" " Klik op de button Lidmaatschap reactiveren om de toezending " "van\n" " berichten te hervatten. Of klik op de button Annuleren om uw\n" " lidmaatschap definitief te beeindigen.\n" " " #: Mailman/Cgi/confirm.py:836 msgid "Re-enable membership" msgstr "Lidmaatschap reactiveren" #: Mailman/Cgi/confirm.py:837 msgid "Cancel" msgstr "Annuleren" #: Mailman/Cgi/create.py:49 Mailman/Cgi/rmlist.py:48 msgid "Bad URL specification" msgstr "Geen goede URL-specificatie" #: Mailman/Cgi/create.py:64 Mailman/Cgi/rmlist.py:176 msgid "Return to the " msgstr "Terug naar het " #: Mailman/Cgi/create.py:66 Mailman/Cgi/rmlist.py:178 msgid "general list overview" msgstr "algemeen lijstoverzicht" #: Mailman/Cgi/create.py:67 Mailman/Cgi/rmlist.py:179 msgid "
    Return to the " msgstr "
    Terug naar het " #: Mailman/Cgi/create.py:69 Mailman/Cgi/rmlist.py:181 msgid "administrative list overview" msgstr "lijstbeheerdersoverzicht" #: Mailman/Cgi/create.py:104 msgid "List name must not include \"@\": %(safelistname)s" msgstr "Lijstnaam mag niet \"@\": %(safelistname)s bevatten" #: Mailman/Cgi/create.py:111 msgid "List already exists: %(safelistname)s" msgstr "Lijst bestaat reeds: %(safelistname)s" #: Mailman/Cgi/create.py:115 msgid "You forgot to enter the list name" msgstr "U bent vergeten de lijstnaam in te voeren" #: Mailman/Cgi/create.py:119 msgid "You forgot to specify the list owner" msgstr "U bent vergeten de lijstbeheerder te specificeren" #: Mailman/Cgi/create.py:126 msgid "" "Leave the initial password (and confirmation) fields\n" " blank if you want Mailman to autogenerate the list\n" " passwords." msgstr "" "Laat het wachtwoordveld (en bevestigingsveld) leeg als u Mailman\n" " een automatisch wachtwoord wilt laten genereren." #: Mailman/Cgi/create.py:135 msgid "Initial list passwords do not match" msgstr "Ingevoerde wachtwoorden komen niet overeen" #: Mailman/Cgi/create.py:144 msgid "The list password cannot be empty" msgstr "Het lijstwachtwoord moet ingevuld worden" #: Mailman/Cgi/create.py:156 msgid "You are not authorized to create new mailing lists" msgstr "U bent niet geautoriseerd om nieuwe maillijsten aan te maken" #: Mailman/Cgi/create.py:164 msgid "Unknown virtual host: %(safehostname)s" msgstr "Onbekende virtual host: %(safehostname)s" #: Mailman/Cgi/create.py:199 bin/newlist:206 msgid "Bad owner email address: %(s)s" msgstr "Foutief e-mailadres van lijsteigenaar: %(s)s" #: Mailman/Cgi/create.py:204 bin/newlist:170 bin/newlist:208 msgid "List already exists: %(listname)s" msgstr "Lijst bestaat reeds: %(listname)s" #: Mailman/Cgi/create.py:212 bin/newlist:204 msgid "Illegal list name: %(s)s" msgstr "Ongeldige lijstnaam: %(s)s" #: Mailman/Cgi/create.py:217 msgid "" "Some unknown error occurred while creating the list.\n" " Please contact the site administrator for assistance." msgstr "" "Er is een onbekende fout opgetreden tijdens het aanmaken van de lijst.\n" " Neem contact op met de sitebeheerder voor assistentie." #: Mailman/Cgi/create.py:254 bin/newlist:249 msgid "Your new mailing list: %(listname)s" msgstr "Uw nieuwe maillijst: %(listname)s" #: Mailman/Cgi/create.py:263 msgid "Mailing list creation results" msgstr "Maillijst aanmaakresultaten:" #: Mailman/Cgi/create.py:269 msgid "" "You have successfully created the mailing list\n" " %(listname)s and notification has been sent to the list owner\n" " %(owner)s. You can now:" msgstr "" "U hebt met succes de maillijst %(listname)s aangemaakt\n" " en een bericht daarvan is verzonden naar de lijsteigenaar\n" " %(owner)s. U kunt nu:" #: Mailman/Cgi/create.py:273 msgid "Visit the list's info page" msgstr "De lijstinformatiepagina bezoeken" #: Mailman/Cgi/create.py:274 msgid "Visit the list's admin page" msgstr "De lijstbeheerderspagina bezoeken" #: Mailman/Cgi/create.py:275 msgid "Create another list" msgstr "Nog een maillijst aanmaken" #: Mailman/Cgi/create.py:293 msgid "Create a %(hostname)s Mailing List" msgstr "Een %(hostname)s maillijst aanmaken" #: Mailman/Cgi/create.py:302 Mailman/Cgi/rmlist.py:199 #: Mailman/Gui/Bounce.py:187 Mailman/htmlformat.py:343 msgid "Error: " msgstr "Fout: " #: Mailman/Cgi/create.py:304 msgid "" "You can create a new mailing list by entering the\n" " relevant information into the form below. The name of the mailing list\n" " will be used as the primary address for posting messages to the list, " "so\n" " it should be lowercased. You will not be able to change this once the\n" " list is created.\n" "\n" "

    You also need to enter the email address of the initial list owner.\n" " Once the list is created, the list owner will be given notification, " "along\n" " with the initial list password. The list owner will then be able to\n" " modify the password and add or remove additional list owners.\n" "\n" "

    If you want Mailman to automatically generate the initial list admin\n" " password, click on `Yes' in the autogenerate field below, and leave the\n" " initial list password fields empty.\n" "\n" "

    You must have the proper authorization to create new mailing lists.\n" " Each site should have a list creator's password, which you can\n" " enter in the field at the bottom. Note that the site administrator's\n" " password can also be used for authentication.\n" " " msgstr "" "U kunt een nieuwe maillijst aanmaken door in het onderstaande formulier de\n" " relevante gegevens in te vullen. De naam van de maillijst zal worden " "gebruikt\n" " als het primaire adres voor het posten van berichten aan de lijst, dus\n" " het moet in kleine letters ingevuld worden. Als de lijst eenmaal is " "aangemaakt, kunt u\n" " de naam niet meer veranderen.\n" "\n" "

    U moet ook een e-mailadres van de lijstbeheerder\n" " invullen. Als de lijst is aangemaakt, zal de lijstbeheerder daarvan " "melding\n" " krijgen en tevens het wachtwoord ontvangen. De lijstbeheerder\n" " kan vervolgens het wachtwoord wijzigen en eventueel extra " "lijstbeheerders\n" " toevoegen of verwijderen.\n" "\n" "

    Als u Mailman automatisch een lijstbeheerderswachtwoord\n" " wilt laten genereren, klikt u op 'Ja' bij de betreffende vraag en laat\n" " u de wachtwoordvelden leeg.\n" "\n" "

    U kunt alleen een nieuwe maillijst aanmaken als u daarvoor\n" " geautoriseerd bent. Elke site hoort een lijstenmaker'swachtwoord\n" " te hebben, dat ingevuld dient te worden in het onderste veld. " "Overigens\n" " kan ook het wachtwoord van de sitebeheerder gebruikt voor " "authentificatie.\n" " " #: Mailman/Cgi/create.py:330 msgid "List Identity" msgstr "Lijstidentiteit" #: Mailman/Cgi/create.py:335 msgid "Name of list:" msgstr "Naam van de lijst:" #: Mailman/Cgi/create.py:342 msgid "Initial list owner address:" msgstr "E-mailadres lijstbeheerder:" #: Mailman/Cgi/create.py:351 msgid "Auto-generate initial list password?" msgstr "Automatisch een wachtwoord genereren?" #: Mailman/Cgi/create.py:359 msgid "Initial list password:" msgstr "Wachtwoord lijstbeheerder:" #: Mailman/Cgi/create.py:365 msgid "Confirm initial password:" msgstr "Bevestiging wachtwoord:" #: Mailman/Cgi/create.py:380 msgid "List Characteristics" msgstr "Lijsteigenschappen" #: Mailman/Cgi/create.py:384 msgid "" "Should new members be quarantined before they\n" " are allowed to post unmoderated to this list? Answer Yes to " "hold\n" " new member postings for moderator approval by default." msgstr "" "Moeten nieuwe leden in 'quarantaine' worden gezet voordat\n" " ze ongemodereerd berichten naar deze lijst mogen versturen? Antwoord\n" " Ja om het vasthouden van berichten van nieuwe leden voor\n" " goedkeuring door de moderator als standaard in te stellen." #: Mailman/Cgi/create.py:413 msgid "" "Initial list of supported languages.

    Note that if you do not\n" " select at least one initial language, the list will use the server\n" " default language of %(deflang)s" msgstr "" "Ondersteunde talen bij aanvang.

    Als u niet minstens ��n\n" " taal selecteert, zal de lijst de standaardtaal van de server\n" " gebruiken: %(deflang)s" #: Mailman/Cgi/create.py:424 msgid "Send \"list created\" email to list owner?" msgstr "Verzend een \"list created\" e-mail naar de lijstbeheerder?" #: Mailman/Cgi/create.py:433 msgid "List creator's (authentication) password:" msgstr "Lijstenmaker's wachtwoord ter authentificatie:" #: Mailman/Cgi/create.py:438 msgid "Create List" msgstr "Lijst aanmaken" #: Mailman/Cgi/create.py:439 msgid "Clear Form" msgstr "Wis inhoud formulier" #: Mailman/Cgi/edithtml.py:45 msgid "General list information page" msgstr "Algemene lijstinformatiepagina" #: Mailman/Cgi/edithtml.py:46 msgid "Subscribe results page" msgstr "Aanmeldingsresultaatpagina" #: Mailman/Cgi/edithtml.py:47 msgid "User specific options page" msgstr "Gebruikersspecifieke instellingenpagina" #: Mailman/Cgi/edithtml.py:48 msgid "Welcome email text file" msgstr "Tekstbestand van het welkomstbericht voor nieuwe leden" #: Mailman/Cgi/edithtml.py:60 msgid "List name is required." msgstr "Lijstnaam is vereist." #: Mailman/Cgi/edithtml.py:100 msgid "%(realname)s -- Edit html for %(template_info)s" msgstr "%(realname)s -- Bewerken html voor %(template_info)s" #: Mailman/Cgi/edithtml.py:106 msgid "Edit HTML : Error" msgstr "Bewerk HTML : Fout" #: Mailman/Cgi/edithtml.py:107 msgid "%(safetemplatename)s: Invalid template" msgstr "%(safetemplatename)s: Geen geldige template" #: Mailman/Cgi/edithtml.py:112 Mailman/Cgi/edithtml.py:113 msgid "%(realname)s -- HTML Page Editing" msgstr "%(realname)s -- HTML-pagina Bewerken" #: Mailman/Cgi/edithtml.py:114 msgid "Select page to edit:" msgstr "Selecteer pagina om te bewerken:" #: Mailman/Cgi/edithtml.py:140 msgid "View or edit the list configuration information." msgstr "Bekijk of wijzig de instellingen van de lijst." #: Mailman/Cgi/edithtml.py:149 msgid "When you are done making changes..." msgstr "Als u klaar bent met het bewerken ..." #: Mailman/Cgi/edithtml.py:150 msgid "Submit Changes" msgstr "Verstuur de wijzigingen" #: Mailman/Cgi/edithtml.py:157 msgid "Can't have empty html page." msgstr "HTML-pagina mag niet leeg zijn!" #: Mailman/Cgi/edithtml.py:158 msgid "HTML Unchanged." msgstr "HTML niet veranderd." #: Mailman/Cgi/edithtml.py:164 msgid "" "The page you saved contains suspicious HTML that could\n" "potentially expose your users to cross-site scripting attacks. This change\n" "has therefore been rejected. If you still want to make these changes, you\n" "must have shell access to your Mailman server.\n" " " msgstr "" "De pagina die u heeft bewaard bevat verdachte HTML die mogelijkerwijs\n" "uw gebruikers blootstelt aan cross-site scripting aanvallen. Deze " "wijziging\n" "is daarom geweigerd. Als u toch deze wijzigingen wilt aanbrengen, heeft u\n" "shell access nodig voor uw Mailman server.\n" #: Mailman/Cgi/edithtml.py:169 msgid "See " msgstr "Zie" #: Mailman/Cgi/edithtml.py:172 msgid "FAQ 4.48." msgstr "FAQ 4.48." #: Mailman/Cgi/edithtml.py:173 msgid "Page Unchanged." msgstr "Pagina niet veranderd." #: Mailman/Cgi/edithtml.py:191 msgid "HTML successfully updated." msgstr "HTML met succes bijgewerkt." #: Mailman/Cgi/listinfo.py:73 msgid "%(hostname)s Mailing Lists" msgstr "Maillijsten op %(hostname)s" #: Mailman/Cgi/listinfo.py:106 msgid "" "

    There currently are no publicly-advertised\n" " %(mailmanlink)s mailing lists on %(hostname)s." msgstr "" "

    Er zijn momenteel geen publieke\n" " %(mailmanlink)s maillijsten op %(hostname)s." #: Mailman/Cgi/listinfo.py:110 msgid "" "

    Below is a listing of all the public mailing lists on\n" " %(hostname)s. Click on a list name to get more information " "about\n" " the list, or to subscribe, unsubscribe, and change the " "preferences\n" " on your subscription." msgstr "" "

    Hieronder vindt u een lijst van alle publieke maillijsten op\n" " %(hostname)s. Klik op een lijstnaam voor meer informatie\n" " over de lijst, om u aan of af te melden, of om uw\n" " persoonlijke instellingen te wijzigen." #: Mailman/Cgi/listinfo.py:116 msgid "right" msgstr "rechts" #: Mailman/Cgi/listinfo.py:119 msgid "" " To visit the general information page for an unadvertised list,\n" " open a URL similar to this one, but with a '/' and the %(adj)s\n" " list name appended.\n" "

    List administrators, you can visit " msgstr "" " Om de algemene informatiepagina te bezoeken van een niet-publieke lijst\n" " opent u een URL zoals deze, maar dan met een '/' en de %(adj)s\n" " lijstnaam erachter.\n" "

    Lijstbeheerders, u kunt doorgaan naar " #: Mailman/Cgi/listinfo.py:124 msgid "the list admin overview page" msgstr "de lijstbeheer-overzichtspagina" #: Mailman/Cgi/listinfo.py:125 msgid "" " to find the management interface for your list.\n" "

    If you are having trouble using the lists, please contact " msgstr "" " om de beheerpagina's te vinden van uw lijst.\n" "

    Vragen over het gebruik van de maillijsten kunt u richten aan " #: Mailman/Cgi/listinfo.py:190 msgid "Edit Options" msgstr "Wijzig opties" #: Mailman/Cgi/listinfo.py:197 Mailman/Cgi/options.py:865 #: Mailman/Cgi/roster.py:112 msgid "View this page in" msgstr "Bekijk deze pagina in" #: Mailman/Cgi/options.py:58 Mailman/Cgi/options.py:75 msgid "CGI script error" msgstr "Fout in CGI-script" #: Mailman/Cgi/options.py:61 msgid "Invalid options to CGI script." msgstr "Ongeldige opties m.b.t. het CGI-script." #: Mailman/Cgi/options.py:107 msgid "No address given" msgstr "Er is geen adres opgegeven" #: Mailman/Cgi/options.py:119 msgid "Illegal Email Address: %(safeuser)s" msgstr "Ongeldig e-mailadres: %(safeuser)s" #: Mailman/Cgi/options.py:126 Mailman/Cgi/options.py:190 #: Mailman/Cgi/options.py:212 msgid "No such member: %(safeuser)s." msgstr "Niet bestaand lid: %(safeuser)s." #: Mailman/Cgi/options.py:176 msgid "" "Your unsubscription request has been\n" " forwarded to the list administrator for approval." msgstr "" "Uw afmeldingsverzoek is doorgestuurd\n" " naar de lijstmoderator ter goedkeuring." #: Mailman/Cgi/options.py:181 Mailman/Cgi/options.py:195 msgid "The confirmation email has been sent." msgstr "Het bevestigingsbericht is verzonden." #: Mailman/Cgi/options.py:206 Mailman/Cgi/options.py:218 #: Mailman/Cgi/options.py:273 msgid "A reminder of your password has been emailed to you." msgstr "Een herinneringsbericht met uw wachtwoord is naar u verzonden." #: Mailman/Cgi/options.py:247 msgid "Authentication failed." msgstr "Authentificatie is mislukt." #: Mailman/Cgi/options.py:280 msgid "" "The list administrator may not view the other\n" " subscriptions for this user." msgstr "" "The lijstbeheerder mag de andere abonnementen\n" " van deze gebruiker niet inzien." #: Mailman/Cgi/options.py:281 Mailman/Cgi/options.py:324 #: Mailman/Cgi/options.py:452 Mailman/Cgi/options.py:668 msgid "Note: " msgstr "Opmerking:" #: Mailman/Cgi/options.py:286 msgid "List subscriptions for %(safeuser)s on %(hostname)s" msgstr "Aanmeldingen voor %(safeuser)s op %(hostname)s" #: Mailman/Cgi/options.py:289 msgid "" "Click on a link to visit your options page for the\n" " requested mailing list." msgstr "" "Klik op een link om uw instellingenpagina voor de\n" " betreffende maillijst te bezoeken." #: Mailman/Cgi/options.py:321 msgid "" "The list administrator may not change the names\n" " or addresses for this user's other subscriptions. However, the\n" " subscription for this mailing list has been changed." msgstr "" "De lijstbeheerder mag de namen of adressen van\n" " andere abonnementen van deze gebruiker niet wijzigen. Het\n" " abonnement op deze maillijst is echter gewijzigd." #: Mailman/Cgi/options.py:344 msgid "Addresses did not match!" msgstr "Adressen komen niet overeen!" #: Mailman/Cgi/options.py:349 msgid "You are already using that email address" msgstr "U gebruikt reeds dat e-mailadres" #: Mailman/Cgi/options.py:361 msgid "" "The new address you requested %(newaddr)s is already a member of the\n" "%(listname)s mailing list, however you have also requested a global change " "of\n" "address. Upon confirmation, any other mailing list containing the address\n" "%(safeuser)s will be changed. " msgstr "" "Uw nieuwe adres %(newaddr)s is reeds lid van de\n" "%(listname)s maillijst, maar u heeft daarnaast tevens adreswijziging " "gevraagd\n" "voor alle maillijsten waarvan u lid bent. Na bevestiging zal het adres\n" "%(safeuser)s in alle maillijsten worden gewijzigd. " #: Mailman/Cgi/options.py:370 msgid "The new address is already a member: %(newaddr)s" msgstr "Het nieuwe adres %(newaddr)s is reeds lid." #: Mailman/Cgi/options.py:376 msgid "Addresses may not be blank" msgstr "E-mailadressen dienen ingevuld te worden" #: Mailman/Cgi/options.py:390 msgid "A confirmation message has been sent to %(newaddr)s. " msgstr "Een bevestigingsbericht is verzonden naar %(newaddr)s." #: Mailman/Cgi/options.py:399 msgid "Bad email address provided" msgstr "Foutief e-mailadres opgegeven" #: Mailman/Cgi/options.py:401 msgid "Illegal email address provided" msgstr "Ongeldig e-mailadres opgegeven" #: Mailman/Cgi/options.py:403 msgid "%(newaddr)s is already a member of the list." msgstr "%(newaddr)s is al lid van de lijst." #: Mailman/Cgi/options.py:406 msgid "" "%(newaddr)s is banned from this list. If you\n" " think this restriction is erroneous, please contact\n" " the list owners at %(owneraddr)s." msgstr "" "Voor %(newaddr)s is een verbod ingesteld\n" " voor deze maillijst. Als u denkt dat dit een vergissing is\n" " kunt u contact opnemen met de lijsteigenaren:\n" " %(owneraddr)s." #: Mailman/Cgi/options.py:417 msgid "Member name successfully changed. " msgstr "Gebruikersnaam is met succes veranderd. " #: Mailman/Cgi/options.py:427 #, fuzzy msgid "" "The list administrator may not change the\n" " password for a user." msgstr "" "The lijstbeheerder mag de andere abonnementen\n" " van deze gebruiker niet inzien." #: Mailman/Cgi/options.py:436 msgid "Passwords may not be blank" msgstr "Wachtwoorden dienen ingevuld te worden" #: Mailman/Cgi/options.py:441 msgid "Passwords did not match!" msgstr "Wachtwoorden kwamen niet overeen!" #: Mailman/Cgi/options.py:449 msgid "" "The list administrator may not change the\n" " password for this user's other subscriptions. However, the\n" " password for this mailing list has been changed." msgstr "" "De lijstbeheerder mag de wachtwoorden van\n" " andere abonnementen van deze gebruiker niet wijzigen. Het\n" " wachtwoord voor deze maillijst is echter gewijzigd." #: Mailman/Cgi/options.py:466 Mailman/Commands/cmd_password.py:83 #: Mailman/Commands/cmd_password.py:109 msgid "Password successfully changed." msgstr "Wachtwoord is met succes veranderd." #: Mailman/Cgi/options.py:475 msgid "" "You must confirm your unsubscription request by turning\n" " on the checkbox below the Unsubscribe button. You\n" " have not been unsubscribed!" msgstr "" "U moet uw afmeldingsverzoek bevestigen door het vakje\n" " onder de button Afmelden aan te vinken. U\n" " bent niet afgemeld!" #: Mailman/Cgi/options.py:507 msgid "Unsubscription results" msgstr "Afmeldingsresultaat" #: Mailman/Cgi/options.py:511 msgid "" "Your unsubscription request has been received and\n" " forwarded on to the list moderators for approval. You will\n" " receive notification once the list moderators have made their\n" " decision." msgstr "" "Uw afmeldingsverzoek is ontvangen en doorgestuurd\n" " naar de lijstmoderators ter goedkeuring. U zult een bericht\n" " ontvangen zodra de lijstmoderators een beslissing hebben\n" " genomen." #: Mailman/Cgi/options.py:516 msgid "" "You have been successfully unsubscribed from the\n" " mailing list %(fqdn_listname)s. If you were receiving digest\n" " deliveries you may get one more digest. If you have any " "questions\n" " about your unsubscription, please contact the list owners at\n" " %(owneraddr)s." msgstr "" "U bent succesvol afgemeld van de maillijst\n" " %(fqdn_listname)s. Als u verzamelmails ontving dan zult u " "erwellicht nog ��n\n" " ontvangen. Als u nog vragen heeft over uw afmelding, neem dan\n" " contact op met de lijsteigenaren op het volgende e-mailadres:\n" " %(owneraddr)s." #: Mailman/Cgi/options.py:665 msgid "" "The list administrator may not change the\n" " options for this user's other subscriptions. However the\n" " options for this mailing list subscription has been\n" " changed." msgstr "" "De lijstbeheerder mag de opties van\n" " andere abonnementen van deze gebruiker niet wijzigen. De\n" " abonnementsopties van deze maillijst zijn echter gewijzigd." #: Mailman/Cgi/options.py:675 msgid "" "The list administrator has disabled digest delivery for\n" " this list, so your delivery option has not been set. However " "your\n" " other options have been set successfully." msgstr "" "De lijstbeheerder heeft voor deze lijst de ontvangst\n" " van verzamelmails uitgezet, dus kon deze door u gewenste\n" " optie niet worden aangezet. Alle andere wijzigingen van uw\n" " instellingen zijn wel met succes doorgevoerd." #: Mailman/Cgi/options.py:679 msgid "" "The list administrator has disabled non-digest delivery\n" " for this list, so your delivery option has not been set. " "However\n" " your other options have been set successfully." msgstr "" "De lijstbeheerder heeft voor deze lijst de ontvangst van reguliere\n" " mail uitgezet, dus kon deze door u gewenste optie niet\n" " worden aangezet. Alle andere wijzigingen van uw instellingen\n" " zijn wel met succes doorgevoerd." #: Mailman/Cgi/options.py:683 msgid "You have successfully set your options." msgstr "De wijzigingen van uw instellingen zijn met succes doorgevoerd." #: Mailman/Cgi/options.py:686 msgid "You may get one last digest." msgstr "U krijgt wellicht nog ��n laatste verzamelmail toegestuurd." #: Mailman/Cgi/options.py:758 msgid "Yes, I really want to unsubscribe" msgstr "Ja, ik wil mezelf echt afmelden" #: Mailman/Cgi/options.py:762 msgid "Change My Password" msgstr "Wijzig mijn wachtwoord" #: Mailman/Cgi/options.py:765 msgid "List my other subscriptions" msgstr "Laat mijn andere aanmeldingen zien" #: Mailman/Cgi/options.py:771 msgid "Email My Password To Me" msgstr "Stuur mijn wachtwoord per e-mail toe" #: Mailman/Cgi/options.py:773 msgid "password" msgstr "wachtwoord" #: Mailman/Cgi/options.py:775 msgid "Log out" msgstr "Uitloggen" #: Mailman/Cgi/options.py:777 msgid "Submit My Changes" msgstr "Verstuur de wijzigingen" #: Mailman/Cgi/options.py:789 msgid "days" msgstr "dagen" #: Mailman/Cgi/options.py:791 msgid "day" msgstr "dag" #: Mailman/Cgi/options.py:792 msgid "%(days)d %(units)s" msgstr "%(days)d %(units)s" #: Mailman/Cgi/options.py:798 msgid "Change My Address and Name" msgstr "Verander mijn e-mailadres en naam" #: Mailman/Cgi/options.py:824 msgid "No topics defined" msgstr "Geen onderwerpen gedefinieerd" #: Mailman/Cgi/options.py:832 msgid "" "\n" "You are subscribed to this list with the case-preserved address\n" "%(cpuser)s." msgstr "" "\n" "U bent op deze lijst aangemeld met het adres\n" "%(cpuser)s." #: Mailman/Cgi/options.py:846 msgid "%(realname)s list: member options login page" msgstr "%(realname)s lijst: inlogpagina voor lidmaatschapsinstellingen" #: Mailman/Cgi/options.py:847 msgid "email address and " msgstr "e-mailadres en " #: Mailman/Cgi/options.py:850 msgid "%(realname)s list: member options for user %(safeuser)s" msgstr "" "%(realname)s lijst: lidmaatschapsinstellingen voor gebruiker %(safeuser)s" #: Mailman/Cgi/options.py:876 msgid "" "In order to change your membership option, you must\n" " first log in by giving your %(extra)smembership password in the section\n" " below. If you don't remember your membership password, you can have it\n" " emailed to you by clicking on the button below. If you just want to\n" " unsubscribe from this list, click on the Unsubscribe button and " "a\n" " confirmation message will be sent to you.\n" "\n" "

    Important: From this point on, you must " "have\n" " cookies enabled in your browser, otherwise none of your changes will " "take\n" " effect.\n" " " msgstr "" "Om uw lidmaatschapsinstellingen te wijzigen moet u hieronder eerst inloggen\n" " met uw wachtwoord. Als u uw wachtwoord niet meer weet, kunt u het via\n" " e-mail toegestuurd krijgen door op de button Herinnering te\n" " klikken. Om u af te melden van deze lijst klikt u op Afmelden;\n" " er zal dan een bevestigingsbericht naar u worden verstuurd.\n" "\n" "

    Belangrijk: Vanaf hier moet het gebruik\n" " van cookies in uw browser toegelaten zijn, anders kunnen uw wijzigingen\n" " niet ge�ffectueerd worden.\n" " " #: Mailman/Cgi/options.py:890 msgid "Email address:" msgstr "E-mailadres:" #: Mailman/Cgi/options.py:894 msgid "Password:" msgstr "Wachtwoord" #: Mailman/Cgi/options.py:896 msgid "Log in" msgstr "Inloggen" #: Mailman/Cgi/options.py:904 msgid "" "By clicking on the Unsubscribe button, a\n" " confirmation message will be emailed to you. This message will have a\n" " link that you should click on to complete the removal process (you can\n" " also confirm by email; see the instructions in the confirmation\n" " message)." msgstr "" "Door op de button Afmelden te klikken, zal een\n" " bevestigingsbericht naar u worden verstuurd. In dit bericht staat een\n" " link vermeld die u moet bezoeken om uw afmelding te voltooien (u kunt\n" " dit desgewenst ook per e-mail doen; het bevestigingsbericht bevat\n" " instructies daartoe)." #: Mailman/Cgi/options.py:912 msgid "Password reminder" msgstr "Wachtwoordherinnering" #: Mailman/Cgi/options.py:916 msgid "" "By clicking on the Remind button, your\n" " password will be emailed to you." msgstr "" "Door op de button Herinnering te klikken, krijgt u uw wachtwoord\n" " per e-mail toegestuurd." #: Mailman/Cgi/options.py:919 msgid "Remind" msgstr "Herinnering" #: Mailman/Cgi/options.py:1019 msgid "" msgstr "" #: Mailman/Cgi/options.py:1030 msgid "Requested topic is not valid: %(topicname)s" msgstr "Vermelde onderwerp is niet geldig: %(topicname)s" #: Mailman/Cgi/options.py:1035 msgid "Topic filter details" msgstr "Details onderwerpfilter" #: Mailman/Cgi/options.py:1038 msgid "Name:" msgstr "Naam:" #: Mailman/Cgi/options.py:1040 msgid "Pattern (as regexp):" msgstr "Patroon (als uitdrukking):" #: Mailman/Cgi/private.py:64 msgid "Private Archive Error" msgstr "Fout in besloten archief" #: Mailman/Cgi/private.py:65 msgid "You must specify a list." msgstr "U dient een lijst te specificeren." #: Mailman/Cgi/private.py:72 msgid "Private archive - \"./\" and \"../\" not allowed in URL." msgstr "Besloten archief - \"./\" en \"../\" niet toegestaan in URL." #: Mailman/Cgi/private.py:109 msgid "Private Archive Error - %(msg)s" msgstr "Fout in besloten archief - %(msg)s" #: Mailman/Cgi/private.py:179 msgid "Private archive file not found" msgstr "Besloten archief bestand niet gevonden" #: Mailman/Cgi/rmlist.py:81 msgid "You're being a sneaky list owner!" msgstr "U bent een listige lijstbeheerder!" #: Mailman/Cgi/rmlist.py:119 msgid "You are not authorized to delete this mailing list" msgstr "U bent niet gemachtigd om deze maillijst te verwijderen" #: Mailman/Cgi/rmlist.py:160 msgid "Mailing list deletion results" msgstr "Maillijst verwijderresultaten" #: Mailman/Cgi/rmlist.py:167 msgid "" "You have successfully deleted the mailing list\n" " %(listname)s." msgstr "" "U heeft met succes de maillijst %(listname)s\n" " verwijderd." #: Mailman/Cgi/rmlist.py:171 msgid "" "There were some problems deleting the mailing list\n" " %(listname)s. Contact your site administrator at %(sitelist)" "s\n" " for details." msgstr "" "Er zijn problemen opgetreden bij het verwijderen van de maillijst\n" " %(listname)s. Neem contact op met uw sitebeheerder " "op %(sitelist)s voor details." #: Mailman/Cgi/rmlist.py:188 msgid "Permanently remove mailing list %(realname)s" msgstr "Permanent verwijderen van maillijst %(realname)s" #: Mailman/Cgi/rmlist.py:202 msgid "" "This page allows you as the list owner, to permanent\n" " remove this mailing list from the system. This action is not\n" " undoable so you should undertake it only if you are absolutely\n" " sure this mailing list has served its purpose and is no longer " "necessary.\n" "\n" "

    Note that no warning will be sent to your list members and after " "this\n" " action, any subsequent messages sent to the mailing list, or any of its\n" " administrative addreses will bounce.\n" "\n" "

    You also have the option of removing the archives for this mailing " "list\n" " at this time. It is almost always recommended that you do\n" " not remove the archives, since they serve as the\n" " historical record of your mailing list.\n" "\n" "

    For your safety, you will be asked to reconfirm the list password.\n" " " msgstr "" "Deze pagina stelt u als lijsteigenaar in staat om deze maillijst definitief\n" " uit het systeem te verwijderen. Deze handeling is\n" " onomkeerbaar dus u moet deze slechts uitvoeren als u er\n" " zeker van bent dat het voortbestaan van de maillijst geen enkel doel " "meer heeft.\n" "\n" "

    Gelieve nota te nemen van het feit dat geen waarschuwing zal worden\n" " verstuurd naar de leden van de lijst en dat na deze handeling elk aan " "de\n" " maillijst of haar administratieve adressen verstuurd bericht zal " "bouncen.\n" "\n" "

    U hebt op dit moment tevens de gelegenheid om de archieven van deze\n" " maillijst te verwijderen. In vrijwel alle gevallen is het aan te raden\n" " om de archieven niet te verwijderen, omdat ze kunnen\n" " dienen als historische getuigenis van uw maillijst.\n" "\n" "

    Als veiligheidsmaatregel zal u worden gevraagd uw lijstwachtwoord te " "herbevestigen.\n" " " #: Mailman/Cgi/rmlist.py:223 msgid "List password:" msgstr "Lijstwachtwoord:" #: Mailman/Cgi/rmlist.py:227 msgid "Also delete archives?" msgstr "Ook de archieven verwijderen?" #: Mailman/Cgi/rmlist.py:235 msgid "Cancel and return to list administration" msgstr "Afbreken en terug gaan naar lijstbeheer" #: Mailman/Cgi/rmlist.py:238 msgid "Delete this list" msgstr "Verwijder deze lijst" #: Mailman/Cgi/roster.py:48 Mailman/Cgi/subscribe.py:50 msgid "Invalid options to CGI script" msgstr "Ongeldige opties voor het CGI-script" #: Mailman/Cgi/roster.py:100 msgid "%(realname)s roster authentication failed." msgstr "%(realname)s lijstauthentificatie mislukt." #: Mailman/Cgi/roster.py:128 Mailman/Cgi/roster.py:129 #: Mailman/Cgi/subscribe.py:49 Mailman/Cgi/subscribe.py:60 msgid "Error" msgstr "Fout" #: Mailman/Cgi/subscribe.py:111 msgid "You must supply a valid email address." msgstr "U moet een geldig e-mailadres opgeven." #: Mailman/Cgi/subscribe.py:123 msgid "You may not subscribe a list to itself!" msgstr "U mag niet het maillijst e-mailadres aanmelden op de lijst zelf!" #: Mailman/Cgi/subscribe.py:131 msgid "If you supply a password, you must confirm it." msgstr "Als u een wachtwoord opgeeft, moet u het ook bevestigen." #: Mailman/Cgi/subscribe.py:133 msgid "Your passwords did not match." msgstr "Uw wachtwoorden kwamen niet overeen." #: Mailman/Cgi/subscribe.py:167 msgid "" "Your subscription request has been received, and will soon be acted upon.\n" "Depending on the configuration of this mailing list, your subscription " "request\n" "may have to be first confirmed by you via email, or approved by the list\n" "moderator. If confirmation is required, you will soon get a confirmation\n" "email which contains further instructions." msgstr "" "Uw aanmeldingsverzoek is ontvangen en zal zo spoedig mogelijk worden\n" "verwerkt. Afhankelijk van de instellingen van deze maillijst moet uw\n" "aanmeldingsverzoek mogelijk eerst nog door u worden bevestigd via e-mail of\n" "worden goedgekeurd door de lijstmoderator. Als bevestiging vereist\n" "is zult u spoedig een e-mail ontvangen met verdere instructies" #: Mailman/Cgi/subscribe.py:181 msgid "" "The email address you supplied is banned from this\n" " mailing list. If you think this restriction is erroneous, please\n" " contact the list owners at %(listowner)s." msgstr "" "Voor het door u opgegeven e-mailadres is een verbod\n" " ingesteld voor deze maillijst. Als u denkt dat dit een\n" " vergissing is kunt u contact opnemen met de\n" " lijsteigenaren: %(listowner)s." #: Mailman/Cgi/subscribe.py:185 msgid "" "The email address you supplied is not valid. (E.g. it must contain an\n" "`@'.)" msgstr "" "Het door u opgegeven e-mailadres is niet geldig (het moet bijvoorbeeld een\n" "`@' bevatten)." #: Mailman/Cgi/subscribe.py:189 msgid "" "Your subscription is not allowed because the email address you gave is\n" "insecure." msgstr "" "Uw aanmelding is niet toegestaan omdat het door u opgegeven e-mailadres\n" "onveilig is." #: Mailman/Cgi/subscribe.py:197 msgid "" "Confirmation from your email address is required, to prevent anyone from\n" "subscribing you without permission. Instructions are being sent to you at\n" "%(email)s. Please note your subscription will not start until you confirm\n" "your subscription." msgstr "" "Er is een bevestiging vereist vanaf uw e-mailadres om te voorkomen dat\n" "anderen u aanmelden zonder uw toestemming. Er zijn instructies naar u\n" "verzonden op het adres %(email)s. Let op: uw lidmaatschap gaat pas van\n" "start nadat u uw aanmelding heeft bevestigd." #: Mailman/Cgi/subscribe.py:209 msgid "" "Your subscription request was deferred because %(x)s. Your request has " "been\n" "forwarded to the list moderator. You will receive email informing you of " "the\n" "moderator's decision when they get to your request." msgstr "" "Uw lidmaatschapssverzoek is aangehouden omdat %(x)s. Uw verzoek is\n" "doorgestuurd naar de lijstmoderator. U zult bericht ontvangen over de\n" "beslissing van de moderator zodra deze het verzoek heeft verwerkt." #: Mailman/Cgi/subscribe.py:216 Mailman/Commands/cmd_confirm.py:61 msgid "You are already subscribed." msgstr "U bent reeds aangemeld." #: Mailman/Cgi/subscribe.py:230 msgid "Mailman privacy alert" msgstr "Mailman privacywaarschuwing" #: Mailman/Cgi/subscribe.py:231 msgid "" "An attempt was made to subscribe your address to the mailing list\n" "%(listaddr)s. You are already subscribed to this mailing list.\n" "\n" "Note that the list membership is not public, so it is possible that a bad\n" "person was trying to probe the list for its membership. This would be a\n" "privacy violation if we let them do this, but we didn't.\n" "\n" "If you submitted the subscription request and forgot that you were already\n" "subscribed to the list, then you can ignore this message. If you suspect " "that\n" "an attempt is being made to covertly discover whether you are a member of " "this\n" "list, and you are worried about your privacy, then feel free to send a " "message\n" "to the list administrator at %(listowner)s.\n" msgstr "" "Er is een poging ondernomen om uw adres aan te melden bij de maillijst\n" "%(listaddr)s. U bent echter al aangemeld voor deze maillijst.\n" "\n" "Wij wijzen u er op dat dit een besloten lijst is, en dat mogelijk een\n" "onbevoegde persoon geprobeerd heeft om de lijst binnen te dringen.\n" "Het zou een privacyschending zijn als we dit toelaten, en dit hebben we\n" "dan ook niet gedaan.\n" "\n" "Als u degene bent die het aanmeldingsverzoek heeft ingediend en was\n" "vergeten dat u reeds bent aangemeld voor deze lijst, dan kunt u\n" "dit bericht negeren. Als u vermoedt dat er een poging is gedaan om\n" "heimelijk te ontdekken of u lid bent van deze lijst, en als u verontrust\n" "bent over uw privacy, meld dit dan s.v.p. aan de lijstbeheerder op\n" "%(listowner)s.\n" #: Mailman/Cgi/subscribe.py:250 msgid "This list does not support digest delivery." msgstr "Deze lijst ondersteunt geen bezorging van verzamelmails." #: Mailman/Cgi/subscribe.py:252 msgid "This list only supports digest delivery." msgstr "Deze lijst ondersteunt alleen de bezorging van verzamelmails." #: Mailman/Cgi/subscribe.py:259 msgid "You have been successfully subscribed to the %(realname)s mailing list." msgstr "U bent met succes aangemeld bij de %(realname)s maillijst." #: Mailman/Commands/cmd_confirm.py:18 msgid "" "\n" " confirm \n" " Confirm an action. The confirmation-string is required and should " "be\n" " supplied by a mailback confirmation notice.\n" msgstr "" "\n" " bevestig \n" " Bevestig een handeling. De bevestigingscode is vereist en moet\n" " worden opgenomen in een terug te sturen bevestingsbericht.\n" #: Mailman/Commands/cmd_confirm.py:41 Mailman/Commands/cmd_lists.py:40 #: Mailman/Commands/cmd_set.py:133 Mailman/Commands/cmd_subscribe.py:69 #: Mailman/Commands/cmd_unsubscribe.py:52 Mailman/Commands/cmd_who.py:67 msgid "Usage:" msgstr "Gebruik:" #: Mailman/Commands/cmd_confirm.py:50 msgid "" "Invalid confirmation string. Note that confirmation strings expire\n" "approximately %(days)s days after the initial subscription request. If " "your\n" "confirmation has expired, please try to re-submit your original request or\n" "message." msgstr "" "Ongeldige bevestigingscode. Let er op dat de bevestigingscode ca.\n" "%(days)s dagen na het aanvankelijke aanmeldingsverzoek verloopt. Als de\n" "bevestigingsperiode is verlopen, probeer uzelf s.v.p. opnieuw aan te\n" "melden." #: Mailman/Commands/cmd_confirm.py:56 msgid "Your request has been forwarded to the list moderator for approval." msgstr "Uw verzoek is doorgestuurd naar de lijstmoderator voor goedkeuring." #: Mailman/Commands/cmd_confirm.py:64 msgid "" "You are not currently a member. Have you already unsubscribed or changed\n" "your email address?" msgstr "" "U bent momenteel geen lid. Heeft u zich misschien al afgemeld of\n" "hebt u uw e-mailadres veranderd?" #: Mailman/Commands/cmd_confirm.py:69 msgid "" "You are currently banned from subscribing to this list. If you think this\n" "restriction is erroneous, please contact the list owners at\n" "%(owneraddr)s." msgstr "" "Voor het door u opgegeven e-mailadres is momenteel een verbod\n" "ingesteld op deze maillijst. Als u denkt dat dit een vergissing is, kunt u\n" "contact opnemen met de lijsteigenaren: %(owneraddr)s." #: Mailman/Commands/cmd_confirm.py:74 msgid "" "You were not invited to this mailing list. The invitation has been " "discarded,\n" "and both list administrators have been alerted." msgstr "" "U was niet uitgenodigd voor deze maillijst. De uitnodiging is genegeerd,\n" "en beide lijstbeheerders zijn gewaarschuwd." #: Mailman/Commands/cmd_confirm.py:78 msgid "Bad approval password given. Held message is still being held." msgstr "" "Bevestigingswachtwoord is niet in orde. Het bericht wordt nog steeds " "vastgehouden." #: Mailman/Commands/cmd_confirm.py:87 msgid "Confirmation succeeded" msgstr "Bevestiging succesvol" #: Mailman/Commands/cmd_echo.py:17 msgid "" "\n" " echo [args]\n" " Simply echo an acknowledgement. Args are echoed back unchanged.\n" msgstr "" "\n" " echo [args]\n" " Simpelweg de beantwoording herhalen. Ook de opgegeven " "argumentenworden onveranderd herhaald.\n" #: Mailman/Commands/cmd_end.py:17 msgid "" "\n" " end\n" " Stop processing commands. Use this if your mail program " "automatically\n" " adds a signature file.\n" msgstr "" "\n" " end\n" " Stoppen met het verwerken van opdrachten. Gebruik dit als uw\n" " mailprogramma automatisch een handtekening-bestand toevoegt.\n" #: Mailman/Commands/cmd_help.py:17 msgid "" "\n" " help\n" " Print this help message.\n" msgstr "" "\n" " help\n" " Druk dit helpbericht af.\n" #: Mailman/Commands/cmd_help.py:47 msgid "You can access your personal options via the following url:" msgstr "U hebt toegang tot uw persoonlijke instellingen via de volgende url:" #: Mailman/Commands/cmd_info.py:17 msgid "" "\n" " info\n" " Get information about this mailing list.\n" msgstr "" "\n" " info\n" " Informatie over deze maillijst ontvangen.\n" #: Mailman/Commands/cmd_info.py:39 Mailman/Commands/cmd_lists.py:62 msgid "n/a" msgstr "n/b" #: Mailman/Commands/cmd_info.py:44 msgid "List name: %(listname)s" msgstr "Lijstnaam: %(listname)s" #: Mailman/Commands/cmd_info.py:45 msgid "Description: %(description)s" msgstr "Omschrijving: %(description)s" #: Mailman/Commands/cmd_info.py:46 msgid "Postings to: %(postaddr)s" msgstr "Berichten richten aan: %(postaddr)s" #: Mailman/Commands/cmd_info.py:47 msgid "List Helpbot: %(requestaddr)s" msgstr "Lijst helpbot: %(requestaddr)s" #: Mailman/Commands/cmd_info.py:48 msgid "List Owners: %(owneraddr)s" msgstr "Lijstbeheerders: %(owneraddr)s" #: Mailman/Commands/cmd_info.py:49 msgid "More information: %(listurl)s" msgstr "Meer informatie: %(listurl)s" #: Mailman/Commands/cmd_join.py:17 msgid "The `join' command is synonymous with `subscribe'.\n" msgstr "De `join' opdracht is gelijk aan de `subscribe' opdracht.\n" #: Mailman/Commands/cmd_leave.py:17 msgid "The `leave' command is synonymous with `unsubscribe'.\n" msgstr "De `leave' opdracht is gelijk aan de `unsubscribe' opdracht.\n" #: Mailman/Commands/cmd_lists.py:17 msgid "" "\n" " lists\n" " See a list of the public mailing lists on this GNU Mailman server.\n" msgstr "" "\n" " lists\n" " Bekijk een lijst van alle publieke maillijsten op deze GNU Mailman " "server.\n" #: Mailman/Commands/cmd_lists.py:44 msgid "Public mailing lists at %(hostname)s:" msgstr "Publieke maillijsten op %(hostname)s:" #: Mailman/Commands/cmd_lists.py:66 msgid "%(i)3d. List name: %(realname)s" msgstr "%(i)3d. Lijstnaam: %(realname)s" #: Mailman/Commands/cmd_lists.py:67 msgid " Description: %(description)s" msgstr " Beschrijving: %(description)s" #: Mailman/Commands/cmd_lists.py:68 msgid " Requests to: %(requestaddr)s" msgstr " Verzoeken naar: %(requestaddr)s" #: Mailman/Commands/cmd_password.py:17 msgid "" "\n" " password [ ] [address=

    ]\n" " Retrieve or change your password. With no arguments, this returns\n" " your current password. With arguments and " "\n" " you can change your password.\n" "\n" " If you're posting from an address other than your membership " "address,\n" " specify your membership address with `address=
    ' (no " "brackets\n" " around the email address, and no quotes!). Note that in this case " "the\n" " response is always sent to the subscribed address.\n" msgstr "" "\n" " password [ ] [address=]\n" " Wachtwoord ophalen of veranderen. Zonder argumenten krijgt u uw\n" " huidige wachtwoord toegestuurd. Met de argumenten \n" " en kunt u uw wachtwoord veranderen.\n" "\n" " Als u een bericht verstuurd vanaf een ander adres dan waar u mee " "aangemeld bent,\n" " geef dan uw aangemelde adres op met `address=' (zonder " "haakjes\n" " voor en achter het e-mailadres, en zonder aanhalingstekens!). Let " "er op dat in dit geval\n" " de bevestiging altijd naar het aangemelde adres wordt verstuurd.\n" #: Mailman/Commands/cmd_password.py:51 Mailman/Commands/cmd_password.py:66 msgid "Your password is: %(password)s" msgstr "Uw wachtwoord is: %(password)s" #: Mailman/Commands/cmd_password.py:57 Mailman/Commands/cmd_password.py:72 #: Mailman/Commands/cmd_password.py:95 Mailman/Commands/cmd_password.py:121 #: Mailman/Commands/cmd_set.py:149 Mailman/Commands/cmd_set.py:219 msgid "You are not a member of the %(listname)s mailing list" msgstr "U bent geen lid van de %(listname)s maillijst" #: Mailman/Commands/cmd_password.py:85 Mailman/Commands/cmd_password.py:111 msgid "" "You did not give the correct old password, so your password has not been\n" "changed. Use the no argument version of the password command to retrieve " "your\n" "current password, then try again." msgstr "" "U heeft niet het correcte oude wachtwoord opgegeven, uw wachtwoord is " "derhalve\n" "niet veranderd. Gebruik de wachtwoord opdracht - zonder argumenten - om uw\n" "huidige wachtwoord toegestuurd te krijgen, en probeer het opnieuw." #: Mailman/Commands/cmd_password.py:89 Mailman/Commands/cmd_password.py:115 msgid "" "\n" "Usage:" msgstr "" "\n" "Gebruik:" #: Mailman/Commands/cmd_remove.py:17 msgid "The `remove' command is synonymous with `unsubscribe'.\n" msgstr "De `remove' opdracht is gelijk aan de `unsubscribe' opdracht.\n" #: Mailman/Commands/cmd_set.py:26 msgid "" "\n" " set ...\n" " Set or view your membership options.\n" "\n" " Use `set help' (without the quotes) to get a more detailed list of " "the\n" " options you can change.\n" "\n" " Use `set show' (without the quotes) to view your current option\n" " settings.\n" msgstr "" "\n" " set ...\n" " Uw lidmaatschapsinstellingen veranderen of bekijken.\n" "\n" " Gebruik `set help' (zonder de aanhalingstekens) om een meer " "gedetailleerde lijst\n" " te krijgen van instellingen die u kunt veranderen.\n" "\n" " Gebruik `set show' (zonder de aanhalingstekens) om uw huidige " "instellingen te\n" " bekijken.\n" #: Mailman/Commands/cmd_set.py:37 msgid "" "\n" " set help\n" " Show this detailed help.\n" "\n" " set show [address=
    ]\n" " View your current option settings. If you're posting from an " "address\n" " other than your membership address, specify your membership address\n" " with `address=
    ' (no brackets around the email address, and " "no\n" " quotes!).\n" "\n" " set authenticate [address=
    ]\n" " To set any of your options, you must include this command first, " "along\n" " with your membership password. If you're posting from an address\n" " other than your membership address, specify your membership address\n" " with `address=
    ' (no brackets around the email address, and " "no\n" " quotes!).\n" "\n" " set ack on\n" " set ack off\n" " When the `ack' option is turned on, you will receive an\n" " acknowledgement message whenever you post a message to the list.\n" "\n" " set digest plain\n" " set digest mime\n" " set digest off\n" " When the `digest' option is turned off, you will receive postings\n" " immediately when they are posted. Use `set digest plain' if " "instead\n" " you want to receive postings bundled into a plain text digest\n" " (i.e. RFC 1153 digest). Use `set digest mime' if instead you want " "to\n" " receive postings bundled together into a MIME digest.\n" "\n" " set delivery on\n" " set delivery off\n" " Turn delivery on or off. This does not unsubscribe you, but " "instead\n" " tells Mailman not to deliver messages to you for now. This is " "useful\n" " if you're going on vacation. Be sure to use `set delivery on' when\n" " you return from vacation!\n" "\n" " set myposts on\n" " set myposts off\n" " Use `set myposts off' to not receive copies of messages you post to\n" " the list. This has no effect if you're receiving digests.\n" "\n" " set hide on\n" " set hide off\n" " Use `set hide on' to conceal your email address when people request\n" " the membership list.\n" "\n" " set duplicates on\n" " set duplicates off\n" " Use `set duplicates off' if you want Mailman to not send you " "messages\n" " if your address is explicitly mentioned in the To: or Cc: fields of\n" " the message. This can reduce the number of duplicate postings you\n" " will receive.\n" "\n" " set reminders on\n" " set reminders off\n" " Use `set reminders off' if you want to disable the monthly password\n" " reminder for this mailing list.\n" msgstr "" "\n" " set help\n" " Toon deze gedetailleerde hulp.\n" "\n" " set show [address=]\n" " Bekijk uw huidige instellingen. Als u een bericht verstuurt vanaf " "een\n" " ander adres dan waarmee u bent aangemeld, specificeer uw " "aanmeldingsadres\n" " met `address=' (zonder haakjes voor en achter het e-mailadres " "en zonder\n" " aanhalingstekens!).\n" "\n" " set authenticate [address=]\n" " Om uw instellingen te wijzigen moet u eerst deze opdracht " "gebruiken,\n" " voorzien van uw wachtwoord. Als u een bericht verstuurt vanaf een\n" " ander adres dan waarmee u bent aangemeld, specificeer uw " "aanmeldingsadres\n" " met `address=' (zonder haakjes voor en achter het e-mailadres " "en zonder\n" " aanhalingstekens!).\n" "\n" " set ack on\n" " set ack off\n" " Als de `ack' instelling aangezet (on) is, krijgt u bij elk bericht\n" " dat u verstuurt naar de maillijst een bevestiging van ontvangst.\n" "\n" " set digest plain\n" " set digest mime\n" " set digest off\n" " Als de `digest' (verzamelmail) instelling uit (off) is, zult u " "berichten ontvangen\n" " zodra deze op de maillijst zijn gepost. Gebruik `set digest plain'\n" " als u gebundelde verzamelberichten wilt ontvangen in gewone tekst\n" " (i.e. RFC 1153 verzamelmail). Gebruik `set digest mime' als u in " "plaats daarvan berichten\n" " wilt ontvangen die gebundeld zijn in MIME verzamelmails.\n" "\n" " set delivery on\n" " set delivery off\n" " Zet het ontvangen van berichten aan (on) of uit (off). Bij gebuik " "van 'off' meldt u zich niet af,\n" " maar Mailman zal u tijdelijk geen berichten toezenden. Dit is " "nuttig\n" " als u op vakantie gaat. Vergeet niet om 'set delivery on' te " "gebruiken\n" " als u terugkomt van vakantie!\n" "\n" " set myposts on\n" " set myposts off\n" " Gebruik `set myposts off' om geen berichten van de maillijst te " "ontvangen die u zelf\n" " heeft verstuurd. Dit heeft geen effect als u verzamelmails " "ontvangt.\n" "\n" " set hide on\n" " set hide off\n" " Gebruikt `set hide on' om uw e-mailadres geheim te houden als men " "de\n" " lidmaatschapslijst raadpleegt.\n" "\n" " set duplicates on\n" " set duplicates off\n" " Gebruik `set duplicates off' als u wilt niet wilt dat Mailman u " "berichten toestuurt\n" " als uw adres expliciet is opgenomen in de To: of Cc: velden van het " "betreffende bericht.\n" " Dit kan voorkomen dat u hetzelfde bericht dubbel ontvangt.\n" "\n" " set reminders on\n" " set reminders off\n" " Gebruik `set reminders off' als u de maandelijkse " "wachtwoordherinnering\n" " van deze maillijst wilt uitschakelen.\n" #: Mailman/Commands/cmd_set.py:122 msgid "Bad set command: %(subcmd)s" msgstr "Ongeldige opdracht: %(subcmd)s" #: Mailman/Commands/cmd_set.py:151 msgid "Your current option settings:" msgstr "Uw huidige instellingen:" #: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191 #: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198 #: Mailman/Commands/cmd_set.py:202 msgid "off" msgstr "uit" #: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191 #: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198 #: Mailman/Commands/cmd_set.py:202 msgid "on" msgstr "aan" #: Mailman/Commands/cmd_set.py:154 msgid " ack %(onoff)s" msgstr " ontvangstbevestiging %(onoff)s" #: Mailman/Commands/cmd_set.py:160 msgid " digest plain" msgstr " verzamelmail gewoon" #: Mailman/Commands/cmd_set.py:162 msgid " digest mime" msgstr " verzamelmail mime" #: Mailman/Commands/cmd_set.py:164 msgid " digest off" msgstr " verzamelmail uit" #: Mailman/Commands/cmd_set.py:169 msgid "delivery on" msgstr "ontvangst aan" #: Mailman/Commands/cmd_set.py:171 Mailman/Commands/cmd_set.py:174 #: Mailman/Commands/cmd_set.py:177 Mailman/Commands/cmd_set.py:181 msgid "delivery off" msgstr "ontvangst uit" #: Mailman/Commands/cmd_set.py:172 msgid "by you" msgstr "door u" #: Mailman/Commands/cmd_set.py:175 msgid "by the admin" msgstr "door de beheerder" #: Mailman/Commands/cmd_set.py:178 msgid "due to bounces" msgstr "vanwege bounces" #: Mailman/Commands/cmd_set.py:186 msgid " %(status)s (%(how)s on %(date)s)" msgstr " %(status)s (%(how)s op %(date)s)" #: Mailman/Commands/cmd_set.py:192 msgid " myposts %(onoff)s" msgstr " eigen berichten %(onoff)s" #: Mailman/Commands/cmd_set.py:195 msgid " hide %(onoff)s" msgstr " onzichtbaar %(onoff)s" #: Mailman/Commands/cmd_set.py:199 msgid " duplicates %(onoff)s" msgstr " dubbele berichten %(onoff)s" #: Mailman/Commands/cmd_set.py:203 msgid " reminders %(onoff)s" msgstr " herinneringen %(onoff)s" #: Mailman/Commands/cmd_set.py:224 msgid "You did not give the correct password" msgstr "U hebt niet het juiste wachtwoord opgegeven" #: Mailman/Commands/cmd_set.py:236 Mailman/Commands/cmd_set.py:283 msgid "Bad argument: %(arg)s" msgstr "Fout argument: %(arg)s" #: Mailman/Commands/cmd_set.py:241 Mailman/Commands/cmd_set.py:261 msgid "Not authenticated" msgstr "Geen toestemming" #: Mailman/Commands/cmd_set.py:254 msgid "ack option set" msgstr "optie 'ontvangstbevestiging' geactiveerd" #: Mailman/Commands/cmd_set.py:286 msgid "digest option set" msgstr "optie 'verzamelmail' geactiveerd" #: Mailman/Commands/cmd_set.py:301 msgid "delivery enabled" msgstr "ontvangst geactiveerd" #: Mailman/Commands/cmd_set.py:304 msgid "delivery disabled by user" msgstr "ontvangst uitgezet door gebruiker" #: Mailman/Commands/cmd_set.py:316 msgid "myposts option set" msgstr "optie 'eigen berichten' geactiveerd" #: Mailman/Commands/cmd_set.py:327 msgid "hide option set" msgstr "optie 'adres geheim houden' geactiveerd" #: Mailman/Commands/cmd_set.py:339 msgid "duplicates option set" msgstr "optie 'dubbele berichten' geactiveerd" #: Mailman/Commands/cmd_set.py:351 msgid "reminder option set" msgstr "optie 'herinneringen' geactiveerd" #: Mailman/Commands/cmd_stop.py:17 msgid "stop is synonymous with the end command.\n" msgstr "stop is synoniem met de end opdracht.\n" #: Mailman/Commands/cmd_subscribe.py:17 msgid "" "\n" " subscribe [password] [digest|nodigest] [address=
    ]\n" " Subscribe to this mailing list. Your password must be given to\n" " unsubscribe or change your options, but if you omit the password, " "one\n" " will be generated for you. You may be periodically reminded of " "your\n" " password.\n" "\n" " The next argument may be either: `nodigest' or `digest' (no " "quotes!).\n" " If you wish to subscribe an address other than the address you sent\n" " this request from, you may specify `address=
    ' (no brackets\n" " around the email address, and no quotes!)\n" msgstr "" "\n" " subscribe [wachtwoord] [digest|nodigest] [address=]\n" " Aanmelden voor deze maillijst. U moet uw wachtwoord opgeven\n" " om u af te melden of om uw instellingen te wijzigen, maar als u\n" " het wachtwoord weglaat zal automatisch een wachtwoord voor u worden\n" " gegenereerd. U kunt periodiek een wachtwoordherinnering ontvangen.\n" "\n" " Het volgende argument mag zijn: `nodigest' of `digest' (zonder " "aanhalingstekens!).\n" " Als u zich aanmeldt voor een adres verschillend van het adres vanaf " "waar u dit aanmeldingsverzoek verstuurt,\n" " dan moet u `address=' (zonder haakjes voor en achter het\n" " e-mailadres, en zonder aanhalingstekens!) specificeren.\n" #: Mailman/Commands/cmd_subscribe.py:62 msgid "Bad digest specifier: %(arg)s" msgstr "Ongeldige verzamelmailspecificatie: %(arg)s" #: Mailman/Commands/cmd_subscribe.py:92 msgid "No valid address found to subscribe" msgstr "Er is geen geldig adres gevonden om aan te melden" #: Mailman/Commands/cmd_subscribe.py:113 msgid "" "The email address you supplied is banned from this mailing list.\n" "If you think this restriction is erroneous, please contact the list\n" "owners at %(listowner)s." msgstr "" "Voor het door u opgegeven e-mailadres is een verbod ingesteld\n" "op deze maillijst. Als u denkt dat dit een vergissing is, kunt u\n" " contact opnemen met de lijstbeheerders op %(listowner)s." #: Mailman/Commands/cmd_subscribe.py:119 msgid "" "Mailman won't accept the given email address as a valid address.\n" "(E.g. it must have an @ in it.)" msgstr "" "Mailman kan het door u opgegeven e-mailadres niet accepteren als een\n" "geldig adres.(Er moet bijvoorbeeld een @ in opgenomen zijn.)" #: Mailman/Commands/cmd_subscribe.py:124 msgid "" "Your subscription is not allowed because\n" "the email address you gave is insecure." msgstr "" "Uw aanmelding is afgewezen omdat het door u\n" "opgegeven e-mailadres onveilig is." #: Mailman/Commands/cmd_subscribe.py:129 msgid "You are already subscribed!" msgstr "U bent al aangemeld!" #: Mailman/Commands/cmd_subscribe.py:133 msgid "No one can subscribe to the digest of this list!" msgstr "Niemand kan zich aanmelden voor de verzamelmail van deze lijst!" #: Mailman/Commands/cmd_subscribe.py:136 msgid "This list only supports digest subscriptions!" msgstr "Op deze lijst kunt u zich alleen aanmelden voor verzamelmail!" #: Mailman/Commands/cmd_subscribe.py:142 msgid "" "Your subscription request has been forwarded to the list administrator\n" "at %(listowner)s for review." msgstr "" "Uw aanmeldingsverzoek is doorgestuurd naar de lijstbeheerder op\n" "%(listowner)s voor controle." #: Mailman/Commands/cmd_subscribe.py:147 msgid "Subscription request succeeded." msgstr "Aanmeldingsverzoek voltooid." #: Mailman/Commands/cmd_unsubscribe.py:17 msgid "" "\n" " unsubscribe [password] [address=
    ]\n" " Unsubscribe from the mailing list. If given, your password must " "match\n" " your current password. If omitted, a confirmation email will be " "sent\n" " to the unsubscribing address. If you wish to unsubscribe an address\n" " other than the address you sent this request from, you may specify\n" " `address=
    ' (no brackets around the email address, and no\n" " quotes!)\n" msgstr "" "\n" " unsubscribe [wachtwoord] [address=]\n" " Afmelden van de maillijst. Indien opgegeven, moet het wachtwoord\n" " overeenkomen met uw huidige wachtwoord. Indien weggelaten, zal een\n" " bevestigingsbericht worden gestuurd naar het af te melden adres.\n" " Als u een afmeldingsbericht wilt versturen vanaf een adres\n" " verschillend van het af te melden adres, specificeer dan met\n" " `address=' (zonder haakjes voor en achter het e-mailadres,\n" " en zonder aanhalingstekens!) het af te melden adres.\n" #: Mailman/Commands/cmd_unsubscribe.py:62 msgid "%(address)s is not a member of the %(listname)s mailing list" msgstr "%(address)s is geen lid van de %(listname)s maillijst" #: Mailman/Commands/cmd_unsubscribe.py:69 msgid "" "Your unsubscription request has been forwarded to the list administrator " "for\n" "approval." msgstr "" "Uw afmeldingsverzoek is doorgestuurd naar de lijstbeheerder ter\n" "goedkeuring." #: Mailman/Commands/cmd_unsubscribe.py:84 msgid "You gave the wrong password" msgstr "U heeft het verkeerde wachtwoord opgegeven" #: Mailman/Commands/cmd_unsubscribe.py:87 msgid "Unsubscription request succeeded." msgstr "Afmeldingsverzoek met succes verwerkt." #: Mailman/Commands/cmd_who.py:27 msgid "" "\n" " who\n" " See the non-hidden members of this mailing list.\n" " who password\n" " See everyone who is on this mailing list. The password is the\n" " list's admin or moderator password.\n" msgstr "" "\n" " who\n" " Bekijk de niet-verborgen leden van deze maillijst.\n" " who password\n" " Bekijk alle leden van deze maillijst. Het wachtwoord is het\n" " wachtwoord van de lijstbeheerder of moderator.\n" #: Mailman/Commands/cmd_who.py:35 msgid "" "\n" " who password [address=
    ]\n" " See the non-hidden members of this mailing list. The roster is\n" " limited to list members only, and you must supply your membership\n" " password to retrieve it. If you're posting from an address other\n" " than your membership address, specify your membership address with\n" " `address=
    ' (no brackets around the email address, and no\n" " quotes!). If you provide the list's admin or moderator password,\n" " hidden members will be included.\n" msgstr "" "\n" " who password [address=]\n" " Bekijk de niet-verborgen leden van deze maillijst. De ledenlijst " "mag\n" " alleen door leden worden ingezien, en u moet uw wachtwoord opgeven\n" " om de lijst op te vragen. Als u de lijst wilt opvragen vanaf een\n" " adres verschillend van uw lidmaatschapsadres, specificeer dan met\n" " `address=' (zonder haakjes voor en achter het e-mailadres,\n" " en zonder aanhalingstekens!) uw lidmaatschapsadres. Als u het \n" " wachtwoord van de lijstbeheerder of moderator opgeeft, zullen ook " "de\n" " verborgen leden worden vermeld." #: Mailman/Commands/cmd_who.py:46 msgid "" "\n" " who password\n" " See everyone who is on this mailing list. The roster is limited to\n" " list administrators and moderators only; you must supply the list\n" " admin or moderator password to retrieve the roster.\n" msgstr "" "\n" " who password\n" " Bekijk alle op deze maillijst aanwezige leden. De ledenlijst mag\n" " alleen door lijstbeheerders en lijstmoderators worden ingezien;\n" " u moet het beheerders- of moderator-wachtwoord opgeven om de lijst\n" " op te vragen.\n" #: Mailman/Commands/cmd_who.py:128 msgid "You are not allowed to retrieve the list membership." msgstr "U heeft geen toestemming om de ledenlijst in te zien." #: Mailman/Commands/cmd_who.py:134 msgid "This list has no members." msgstr "Deze lijst heeft geen leden." #: Mailman/Commands/cmd_who.py:148 msgid "Non-digest (regular) members:" msgstr "Leden zonder verzamelmail:" #: Mailman/Commands/cmd_who.py:151 msgid "Digest members:" msgstr "Leden met verzamelmail:" #: Mailman/Defaults.py:1367 msgid "Arabic" msgstr "Arabisch" #: Mailman/Defaults.py:1368 msgid "Catalan" msgstr "Catalaans" #: Mailman/Defaults.py:1369 msgid "Czech" msgstr "Tsjechisch" #: Mailman/Defaults.py:1370 msgid "Danish" msgstr "Deens" #: Mailman/Defaults.py:1371 msgid "German" msgstr "Duits" #: Mailman/Defaults.py:1372 msgid "English (USA)" msgstr "Engels (USA)" #: Mailman/Defaults.py:1373 msgid "Spanish (Spain)" msgstr "Spaans (Spanje)" #: Mailman/Defaults.py:1374 msgid "Estonian" msgstr "Estlands" #: Mailman/Defaults.py:1375 msgid "Euskara" msgstr "Baskisch" #: Mailman/Defaults.py:1376 msgid "Finnish" msgstr "Fins" #: Mailman/Defaults.py:1377 msgid "French" msgstr "Frans" #: Mailman/Defaults.py:1378 #, fuzzy msgid "Galician" msgstr "Italiaans" #: Mailman/Defaults.py:1379 msgid "Hebrew" msgstr "Hebreeuws" #: Mailman/Defaults.py:1380 msgid "Croatian" msgstr "Kroatisch" #: Mailman/Defaults.py:1381 msgid "Hungarian" msgstr "Hongaars" #: Mailman/Defaults.py:1382 msgid "Interlingua" msgstr "Interlingua" #: Mailman/Defaults.py:1383 msgid "Italian" msgstr "Italiaans" #: Mailman/Defaults.py:1384 msgid "Japanese" msgstr "Japans" #: Mailman/Defaults.py:1385 msgid "Korean" msgstr "Koreaans" #: Mailman/Defaults.py:1386 msgid "Lithuanian" msgstr "Litouws" #: Mailman/Defaults.py:1387 msgid "Dutch" msgstr "Nederlands" #: Mailman/Defaults.py:1388 msgid "Norwegian" msgstr "Noors" #: Mailman/Defaults.py:1389 msgid "Polish" msgstr "Pools" #: Mailman/Defaults.py:1390 msgid "Portuguese" msgstr "Portugees" #: Mailman/Defaults.py:1391 msgid "Portuguese (Brazil)" msgstr "Portugees (Brazili�)" #: Mailman/Defaults.py:1392 msgid "Romanian" msgstr "Roemeens" #: Mailman/Defaults.py:1393 msgid "Russian" msgstr "Russisch" #: Mailman/Defaults.py:1394 msgid "Slovak" msgstr "Slowaaks" #: Mailman/Defaults.py:1395 msgid "Slovenian" msgstr "Sloveens" #: Mailman/Defaults.py:1396 msgid "Serbian" msgstr "Servisch" #: Mailman/Defaults.py:1397 msgid "Swedish" msgstr "Zweeds" #: Mailman/Defaults.py:1398 msgid "Turkish" msgstr "Turks" #: Mailman/Defaults.py:1399 msgid "Ukrainian" msgstr "Oekrains" #: Mailman/Defaults.py:1400 msgid "Vietnamese" msgstr "Vietnamees" #: Mailman/Defaults.py:1401 msgid "Chinese (China)" msgstr "Chinees (China)" #: Mailman/Defaults.py:1402 msgid "Chinese (Taiwan)" msgstr "Chinees (Taiwan)" #: Mailman/Deliverer.py:51 msgid "" "Note: Since this is a list of mailing lists, administrative\n" "notices like the password reminder will be sent to\n" "your membership administrative address, %(addr)s." msgstr "" "Opmerking: Omdat dit een lijst is van maillijsten, zullen\n" "beheerdersmeldingen zoals wachtwoordherinneringen\n" "worden verzonden naar uw lidmaatschapsadres, %(addr)s." #: Mailman/Deliverer.py:71 msgid " (Digest mode)" msgstr " (Verzamelmail modus)" #: Mailman/Deliverer.py:77 msgid "Welcome to the \"%(realname)s\" mailing list%(digmode)s" msgstr "Welkom op de \"%(realname)s\" maillijst%(digmode)s" #: Mailman/Deliverer.py:86 msgid "You have been unsubscribed from the %(realname)s mailing list" msgstr "U bent afgemeld van de %(realname)s maillijst" #: Mailman/Deliverer.py:113 msgid "%(listfullname)s mailing list reminder" msgstr "%(listfullname)s maillijstherinnering" #: Mailman/Deliverer.py:165 Mailman/Deliverer.py:184 msgid "Hostile subscription attempt detected" msgstr "Kwaadwillige aanmeldingspoging ontdekt" #: Mailman/Deliverer.py:166 msgid "" "%(address)s was invited to a different mailing\n" "list, but in a deliberate malicious attempt they tried to confirm the\n" "invitation to your list. We just thought you'd like to know. No further\n" "action by you is required." msgstr "" "%(address)s was uitgenodigd voor een andere maillijst, maar in een\n" "kwaadwillige poging is getracht de uitnodiging te bevestigen op uw lijst.\n" "Wij veronderstellen dat u dit wilde weten. Er is geen verdere actie nodig\n" "van uw kant." #: Mailman/Deliverer.py:185 msgid "" "You invited %(address)s to your list, but in a\n" "deliberate malicious attempt, they tried to confirm the invitation to a\n" "different list. We just thought you'd like to know. No further action by " "you\n" "is required." msgstr "" "U hebt %(address)s uitgenodigd op uw lijst, maar in een kwaadwillige\n" "poging heeft deze getracht de uitnodiging te bevestigen op een andere\n" "lijst. Wij veronderstellen dat u dit wilde weten. Er is geen verdere actie " "nodig\n" "van uw kant." #: Mailman/Deliverer.py:218 msgid "%(listname)s mailing list probe message" msgstr "%(listname)s onderzoeksbericht" #: Mailman/Errors.py:114 msgid "For some unknown reason" msgstr "Om onbekende redenen" #: Mailman/Errors.py:120 Mailman/Errors.py:143 msgid "Your message was rejected" msgstr "Uw bericht is geweigerd" #: Mailman/Gui/Archive.py:25 msgid "Archiving Options" msgstr "Archief" #: Mailman/Gui/Archive.py:31 msgid "List traffic archival policies." msgstr "Archiefbeleid van het lijstverkeer." #: Mailman/Gui/Archive.py:34 msgid "Archive messages?" msgstr "Archiveer berichten?" #: Mailman/Gui/Archive.py:36 msgid "private" msgstr "aleen voor leden" #: Mailman/Gui/Archive.py:36 msgid "public" msgstr "publiek toegankelijk" #: Mailman/Gui/Archive.py:37 msgid "Is archive file source for public or private archival?" msgstr "Is het archief publiek toegankelijk of alleen voor leden?" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Monthly" msgstr "Elke maand" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Quarterly" msgstr "Elk kwartaal" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Yearly" msgstr "Elk jaar" #: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79 msgid "Daily" msgstr "Elke dag" #: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79 msgid "Weekly" msgstr "Elke week" #: Mailman/Gui/Archive.py:43 msgid "How often should a new archive volume be started?" msgstr "Hoe vaak moet een nieuw archief worden gestart?" #: Mailman/Gui/Autoresponse.py:31 msgid "Auto-responder" msgstr "Automatische beantwoorder" #: Mailman/Gui/Autoresponse.py:39 msgid "" "Auto-responder characteristics.

    \n" "\n" "In the text fields below, string interpolation is performed with\n" "the following key/value substitutions:\n" "

      \n" "
    • listname - gets the name of the mailing list\n" "
    • listurl - gets the list's listinfo URL\n" "
    • requestemail - gets the list's -request address\n" "
    • owneremail - gets the list's -owner address\n" "
    \n" "\n" "

    For each text field, you can either enter the text directly into the " "text\n" "box, or you can specify a file on your local system to upload as the text." msgstr "" "Instellingen van de automatische beantwoorder.

    \n" "\n" "In de tekstvelden hieronder kunnen 'strings' gebruikt worden ter\n" "aanduiding van de volgende waarden:\n" "

      \n" "
    • listname - geeft de naam van de maillijst\n" "
    • listurl - geeft het webadres van de " "lijstinformatiepagina\n" "
    • requestemail - geeft het adres te gebruiken voor " "aanmeldingsverzoeken\n" "
    • owneremail - geeft het adres van de lijstbeheerder\n" "
    \n" "\n" "

    Bij elke tekstoptie kunt u de tekst direct in het betreffende tekstveld\n" "invoeren, maar u kunt er ook voor kiezen om een tekstbestand op uw pc\n" "te uploaden." #: Mailman/Gui/Autoresponse.py:55 msgid "" "Should Mailman send an auto-response to mailing list\n" " posters?" msgstr "" "Moet Mailman een automatisch antwoord versturen aan\n" " afzenders van berichten?" #: Mailman/Gui/Autoresponse.py:60 msgid "Auto-response text to send to mailing list posters." msgstr "" "Automatische antwoordtekst om te versturen aan afzenders van berichten." #: Mailman/Gui/Autoresponse.py:63 msgid "" "Should Mailman send an auto-response to emails sent to the\n" " -owner address?" msgstr "" "Moet Mailman een automatisch antwoord versturen aan afzenders van berichten\n" " gericht aan het adres van de lijsteigenaar?" #: Mailman/Gui/Autoresponse.py:68 msgid "Auto-response text to send to -owner emails." msgstr "" "Automatische antwoordtekst voor berichten gericht aan de lijsteigenaar." #: Mailman/Gui/Autoresponse.py:71 msgid "Yes, w/discard" msgstr "Ja, met negeren" #: Mailman/Gui/Autoresponse.py:71 msgid "Yes, w/forward" msgstr "Ja, met doorsturen" #: Mailman/Gui/Autoresponse.py:72 msgid "" "Should Mailman send an auto-response to emails sent to the\n" " -request address? If you choose yes, decide whether you want\n" " Mailman to discard the original email, or forward it on to the\n" " system as a normal mail command." msgstr "" "Moet Mailman een automatisch antwoord versturen aan afzenders van berichten\n" " gericht aan het adres voor aanmeldingsverzoeken? Als u ja " "kiest,\n" " beslis dan of u wilt dat Mailman het oorspronkelijke bericht\n" " negeert of dat het moet worden doorgestuurd naar het systeem\n" " als een regulier verzoek." #: Mailman/Gui/Autoresponse.py:79 msgid "Auto-response text to send to -request emails." msgstr "" "Automatische antwoordtekst voor berichten gericht aan het adres voor " "aanmeldingsverzoeken." #: Mailman/Gui/Autoresponse.py:82 msgid "" "Number of days between auto-responses to either the mailing\n" " list or -request/-owner address from the same poster. Set to\n" " zero (or negative) for no grace period (i.e. auto-respond to\n" " every message)." msgstr "" "Aantal dagen tussen automatische antwoorden aan dezelfde afzender, zowel\n" " m.b.t. berichten gericht aan de maillijst als aan de adressen " "van de\n" " lijsteigenaar en aanmeldingsverzoeken. Stel in op nul (of een\n" " negatief getal) voor geen uitstel (m.a.w. automatische " "beantwoording\n" " van elk bericht)." #: Mailman/Gui/Bounce.py:26 msgid "Bounce processing" msgstr "Bounceverwerking" #: Mailman/Gui/Bounce.py:32 msgid "" "These policies control the automatic bounce processing system\n" " in Mailman. Here's an overview of how it works.\n" "\n" "

    When a bounce is received, Mailman tries to extract two " "pieces\n" " of information from the message: the address of the member the\n" " message was intended for, and the severity of the problem " "causing\n" " the bounce. The severity can be either hard or\n" " soft meaning either a fatal error occurred, or a\n" " transient error occurred. When in doubt, a hard severity is " "used.\n" "\n" "

    If no member address can be extracted from the bounce, then " "the\n" " bounce is usually discarded. Otherwise, each member is assigned " "a\n" " bounce score and every time we encounter a bounce from\n" " this member we increment the score. Hard bounces increment by " "1\n" " while soft bounces increment by 0.5. We only increment the " "bounce\n" " score once per day, so even if we receive ten hard bounces from " "a\n" " member per day, their score will increase by only 1 for that " "day.\n" "\n" "

    When a member's bounce score is greater than the\n" " bounce score\n" " threshold, the subscription is disabled. Once disabled, " "the\n" " member will not receive any postings from the list until their\n" " membership is explicitly re-enabled (either by the list\n" " administrator or the user). However, they will receive " "occasional\n" " reminders that their membership has been disabled, and these\n" " reminders will include information about how to re-enable their\n" " membership.\n" "\n" "

    You can control both the\n" " number\n" " of reminders the member will receive and the\n" " frequency with which these reminders are sent.\n" "\n" "

    There is one other important configuration variable; after a\n" " certain period of time -- during which no bounces from the " "member\n" " are received -- the bounce information is\n" " considered\n" " stale and discarded. Thus by adjusting this value, and the\n" " score threshold, you can control how quickly bouncing members " "are\n" " disabled. You should tune both of these to the frequency and\n" " traffic volume of your list." msgstr "" "Bounces zijn retourmeldingen van berichten die\n" " niet op de plaats van bestemming zijn aangekomen. Mailman heeft\n" " een automatisch bounceverwerkingssysteem. Hier vindt u een\n" " overzicht hoe dit werkt en hoe u het nader kunt instellen.\n" "\n" "

    Wanneer een bounce wordt ontvangen zal Mailman proberen\n" " twee soorten informatie uit het bericht te halen: het adres van " "het lid\n" " waar het bericht voor bedoeld was en de zwaarte van het " "probleem\n" " dat de bounce heeft veroorzaakt. De zwaarte kan hard " "of\n" " zacht zijn, wat betekent dat er �f een fatale fout is " "opgetreden\n" " �f een tijdelijke fout. Bij twijfel wordt een harde zwaarte " "gebruikt.\n" "\n" "

    Als het niet mogelijk is om een adres van een lid te " "achterhalen uit\n" " de bounce dan wordt de bounce genegeerd. Lukt het achterhalen " "wel,\n" " dan wordt de bounce opgeteld bij de bounceteller. Bij " "harde\n" " bounces wordt er opgeteld met 1, bij zachte bounces met 0,5. De " "teller wordt\n" " alleen eens per dag opgehoogd, dus zelfs als er 10 harde bounces " "worden\n" " ontvangen voor een lid in een dag, dan zal de teller maar met 1 " "worden\n" " opgehoogd.\n" "\n" "

    Als de bounceteller boven de \n" " bounceteller\n" " grens komt dan wordt het lidmaatschap uitgezet. Bij het " "uitzetten ontvangt\n" " het lid geen berichten meer van de lijst totdat het lidmaatschap " "weer is aangezet\n" " (door de lijstbeheerder of de gebruiker zelf). Ondertussen zal " "het lid af en toe\n" " herinneringen ontvangen dat zijn lidmaatschap is uitgeschakeld. " "In deze\n" " herinneringen staat beschreven hoe het lid zijn lidmaatschap " "weer kan aanzetten.\n" "\n" "

    U kunt zowel het \n" " aantal\n" " herinneringen instellen dat het lid ontvangt als de \n" " frequentie waarmee deze herinneringen worden verzonden.\n" "\n" "

    Er is nog een belangrijke instelling: Na een bepaalde " "periode,\n" " als er geen bounces van het lid zijn ontvangen, zullen de " "bouncegegevens\n" " worden beschouwd als\n" " verlopen\n" " en worden genegeerd. Door deze waarde en de bounceteller grens " "aan te passen\n" " kunt u bepalen hoe snel een lidmaatschap met bounces wordt " "uitgeschakeld. Het is\n" " aan te raden om dit af te stemmen op de frequentie en de volume " "van de berichten\n" " voor de maillijst." #: Mailman/Gui/Bounce.py:75 msgid "Bounce detection sensitivity" msgstr "Bouncedetectie-gevoeligheid" #: Mailman/Gui/Bounce.py:78 msgid "Should Mailman perform automatic bounce processing?" msgstr "Moet Mailman automatische bounceverwerking doen?" #: Mailman/Gui/Bounce.py:79 msgid "" "By setting this value to No, you disable all\n" " automatic bounce processing for this list, however bounce\n" " messages will still be discarded so that the list " "administrator\n" " isn't inundated with them." msgstr "" "Door deze instelling op Nee te zetten\n" " schakelt u alle automatische bounceverwerking voor deze \n" " lijst uit. Bounceberichten zullen nog steeds worden\n" " genegeerd, zodat de lijstbeheerder niet wordt overstroomd\n" " met deze berichten." #: Mailman/Gui/Bounce.py:85 msgid "" "The maximum member bounce score before the member's\n" " subscription is disabled. This value can be a floating point\n" " number." msgstr "" "De maximum bounce score voordat het lidmaatschap\n" " wordt uitgeschakeld. Deze waarde mag decimalen achter de punt\n" " hebben." #: Mailman/Gui/Bounce.py:88 msgid "" "Each subscriber is assigned a bounce score, as a floating\n" " point number. Whenever Mailman receives a bounce from a list\n" " member, that member's score is incremented. Hard bounces " "(fatal\n" " errors) increase the score by 1, while soft bounces (temporary\n" " errors) increase the score by 0.5. Only one bounce per day\n" " counts against a member's score, so even if 10 bounces are\n" " received for a member on the same day, their score will " "increase\n" " by just 1.\n" "\n" " This variable describes the upper limit for a member's bounce\n" " score, above which they are automatically disabled, but not\n" " removed from the mailing list." msgstr "" "Elk lid heeft een maximum bounce score toegewezen gekregen, een getal met " "decimalen\n" " achter de punt. Als Mailman een bounce ontvangt van het lid, " "zal\n" " de score worden verhoogd. Harde bounces (fatale fouten) " "verhogen\n" " de score met 1.0, terwijl zachte bounces (tijdelijke fouten) " "de\n" " score met 0.5 verhogen. Slechts ��n bounce per dag draagt bij " "aan\n" " de verhoging van de score, dus zelfs als 10 bounces op dezelfde " "dag\n" " worden ontvangen, zal de score met niet meer dan 1.0 worden " "verhoogd.\n" "\n" " Deze variable legt de bovenlimiet vast voor de bounce score " "van\n" " een lid, waarboven het lidmaaatschap automatisch wordt " "uitgezet,\n" " maar waarbij het lid nog niet verwijderd wordt van de maillijst." #: Mailman/Gui/Bounce.py:102 msgid "" "The number of days after which a member's bounce information\n" " is discarded, if no new bounces have been received in the\n" " interim. This value must be an integer." msgstr "" "Het aantal dagen waarna de bouncegegevens van het lid terzijde zullen " "worden\n" " geschoven, als er geen nieuwe bounceberichten zijn ontvangen.\n" " Deze waarde moet een heel getal zijn." #: Mailman/Gui/Bounce.py:107 msgid "" "How many Your Membership Is Disabled warnings a\n" " disabled member should get before their address is removed " "from\n" " the mailing list. Set to 0 to immediately remove an address " "from\n" " the list once their bounce score exceeds the threshold. This\n" " value must be an integer." msgstr "" "Hoeveel Uw lidmaatschap is geinactiveerd herinneringen\n" " moet een lid krijgen voordat het adres uit de maillijst wordt\n" " verwijderd. Stel dit in op 0 om het adres direct te " "verwijderen\n" " als de maximum bounce score is overschreden. Deze waarde moet\n" " een heel getal zijn." #: Mailman/Gui/Bounce.py:114 msgid "" "The number of days between sending the Your Membership\n" " Is Disabled warnings. This value must be an integer." msgstr "" "Het aantal dagen tussen het verzenden van Uw lidmaatschap is " "geinactiveerd\n" " herinneringen. Deze waarde moet een heel getal zijn." #: Mailman/Gui/Bounce.py:117 Mailman/Gui/General.py:265 msgid "Notifications" msgstr "Meldingen" #: Mailman/Gui/Bounce.py:121 msgid "" "Should Mailman send you, the list owner, any bounce messages\n" " that failed to be detected by the bounce processor? Yes\n" " is recommended." msgstr "" "Moet Mailman u, de lijsteigenaar, ieder bouncebericht dat niet kon\n" " worden gedetecteerd door de bounceverwerker doorsturen?\n" " Ja is aanbevolen." #: Mailman/Gui/Bounce.py:124 msgid "" "While Mailman's bounce detector is fairly robust, it's\n" " impossible to detect every bounce format in the world. You\n" " should keep this variable set to Yes for two reasons: " "1)\n" " If this really is a permanent bounce from one of your members,\n" " you should probably manually remove them from your list, and " "2)\n" " you might want to send the message on to the Mailman " "developers\n" " so that this new format can be added to its known set.\n" "\n" "

    If you really can't be bothered, then set this variable to\n" " No and all non-detected bounces will be discarded\n" " without further processing.\n" "\n" "

    Note: This setting will also affect all messages " "sent\n" " to your list's -admin address. This address is deprecated and\n" " should never be used, but some people may still send mail to " "this\n" " address. If this happens, and this variable is set to\n" " No those messages too will get discarded. You may " "want\n" " to set up an\n" " autoresponse\n" " message for email to the -owner and -admin address." msgstr "" "Ondanks het feit dat de bouncedetector tamelijk robuust is, is het\n" " onmogelijk om elk in de wereld bestaand bounce-format te\n" " detecteren. U wordt aangeraden deze variabele op Ja " "te\n" " houden om twee redenen: 1) Als het echt een permanente bounce\n" " betreft van een van de leden, dan moet u deze waarschijnlijk\n" " handmatig uit de lijst verwijderen, en 2) u kunt het bericht\n" " aan de makers van Mailman sturen opdat dit nieuwe format kan\n" " worden toegevoegd aan de set van bekende formats.\n" "\n" "

    Als u dat allemaal niet kan schelen, zet dan deze variabele\n" " op Nee en alle niet gedetecteerde bounceberichten\n" " zullen worden genegeerd zonder verdere verwerking.\n" "\n" "

    Opmerking: Deze instelling heeft ook invloed op alle\n" " berichten gericht aan het -admin adres. Dit adres heeft de\n" " status 'deprecated' (verouderd/niet geldig) gekregen en moet\n" " nooit gebruikt worden, maar de mogelijkheid bestaat dat " "sommige\n" " personen nog steeds mail sturen naar dit adres. Als dat " "gebeurt,\n" " en deze variabele is op Nee gezet, dan zullen ook " "deze\n" " berichten worden genegeerd. U kunt besluiten om een\n" " automatisch\n" " antwoord in te stellen voor e-mail gericht aan het -owner " "en -admin adres." #: Mailman/Gui/Bounce.py:147 msgid "" "Should Mailman notify you, the list owner, when bounces\n" " cause a member's subscription to be disabled?" msgstr "" "Moet Mailman u, de lijsteigenaar, een melding sturen wanneer\n" " een lidmaatschap is uitgeschakeld vanwege bounceberichten?" #: Mailman/Gui/Bounce.py:149 msgid "" "By setting this value to No, you turn off\n" " notification messages that are normally sent to the list " "owners\n" " when a member's delivery is disabled due to excessive bounces.\n" " An attempt to notify the member will always be made." msgstr "" "Door deze waarde op Nee in te stellen worden\n" " meldingsberichten uitgeschakeld die normaliter aan de\n" " lijsteigenaren zouden worden verstuurd als een lidmaatschap " "wordt\n" " uitgeschakeld vanwege een excessief aantal bounces. Er zal wel\n" " altijd een poging worden gedaan om het lid op de hoogte te " "stellen." #: Mailman/Gui/Bounce.py:156 msgid "" "Should Mailman notify you, the list owner, when bounces\n" " cause a member to be unsubscribed?" msgstr "" "Moet Mailman u, de lijsteigenaar, een melding sturen wanneer\n" " een lid definitief zal worden afgemeld vanwege bounces?" #: Mailman/Gui/Bounce.py:158 msgid "" "By setting this value to No, you turn off\n" " notification messages that are normally sent to the list " "owners\n" " when a member is unsubscribed due to excessive bounces. An\n" " attempt to notify the member will always be made." msgstr "" "Door deze waarde op Nee in te stellen worden\n" " meldingsberichten uitgeschakeld die normaliter aan de\n" " lijsteigenaeren zouden worden verstuurd als een lid definitief\n" " wordt afgemeld vanwege een excessief aantal bounces. Er zal " "wel\n" " altijd een poging worden gedaan om het lid op de hoogte te " "stellen." #: Mailman/Gui/Bounce.py:185 msgid "" "Bad value for %(property)s: %(val)s" msgstr "" "Verkeerde waarde voor %(property)s: %(val)s" #: Mailman/Gui/ContentFilter.py:30 msgid "Content filtering" msgstr "Inhoudsfilter" #: Mailman/Gui/ContentFilter.py:37 msgid "Forward to List Owner" msgstr "Doorsturen naar de lijsteigenaar" #: Mailman/Gui/ContentFilter.py:39 msgid "Preserve" msgstr "Bewaren" #: Mailman/Gui/ContentFilter.py:42 msgid "" "Policies concerning the content of list traffic.\n" "\n" "

    Content filtering works like this: when a message is\n" " received by the list and you have enabled content filtering, " "the\n" " individual attachments are first compared to the\n" " filter\n" " types. If the attachment type matches an entry in the " "filter\n" " types, it is discarded.\n" "\n" "

    Then, if there are pass types\n" " defined, any attachment type that does not match a\n" " pass type is also discarded. If there are no pass types " "defined,\n" " this check is skipped.\n" "\n" "

    After this initial filtering, any multipart\n" " attachments that are empty are removed. If the outer message " "is\n" " left empty after this filtering, then the whole message is\n" " discarded.\n" "\n" "

    Then, each multipart/alternative section will\n" " be replaced by just the first alternative that is non-empty " "after\n" " filtering if\n" " collapse_alternatives is enabled.\n" "\n" "

    Finally, any text/html parts that are left in the\n" " message may be converted to text/plain if\n" " convert_html_to_plaintext is enabled and the site is\n" " configured to allow these conversions." msgstr "" "Beleid over de inhoud van lijstverkeer.\n" "\n" "

    Filteren op inhoud werkt als volgt: als een\n" " bericht door de lijst wordt ontvangen en filteren op inhoud is\n" " aangezet, dan zullen de individuele bijlagen eerst worden\n" " vergeleken met de\n" " \n" " filtertypes. Als het type bijlage overeenkomt met ��n van " "de\n" " gedefinieerde filtertypes, dan wordt de bijlage verwijderd.\n" "\n" "

    Vervolgens, als er doorlaattypes\n" " zijn gedefinieerd, zal elk type bijlage dat niet\n" " overeenkomt met een doorlaattype ook worden verwijderd. Als " "geen\n" " doorlaattypes zijn gedefinieerd wordt deze controle " "overgeslagen.\n" "\n" "

    Na deze initi�le filters, zal elke multipart bijlage " "die\n" " leeg is worden verwijderd. Indien het bericht zelf dan leeg is, " "zal\n" " het hele bericht worden verwijderd.\n" "\n" "

    Daarna zal elke multipart/alternative sectie\n" " worden vervangen door het eerste alternatief dat niet leeg is\n" " na het filteren als\n" " collapse_alternatives is aangezet.\n" "\n" "

    Tenslotte zullen alle text/html delen die zijn\n" " overgebleven in het bericht worden omgezet naar text/plain\n" " als convert_html_to_plaintext is aangezet en de site dusdanig " "is\n" " geconfigureerd dat deze omzettingen zijn toegestaan." #: Mailman/Gui/ContentFilter.py:75 msgid "" "Should Mailman filter the content of list traffic according\n" " to the settings below?" msgstr "" "Moet Mailman de inhoud van het lijstverkeer filteren\n" " volgens onderstaande instellingen?" #: Mailman/Gui/ContentFilter.py:79 msgid "" "Remove message attachments that have a matching content\n" " type." msgstr "" "Filtertypes: verwijder berichtbijlages die overeenkomen met ��n van de\n" " volgende inhoudstypes." #: Mailman/Gui/ContentFilter.py:82 msgid "" "Use this option to remove each message attachment that\n" " matches one of these content types. Each line should contain " "a\n" " string naming a MIME type/subtype,\n" " e.g. image/gif. Leave off the subtype to remove all\n" " parts with a matching major content type, e.g. image.\n" "\n" "

    Blank lines are ignored.\n" "\n" "

    See also pass_mime_types for a content type whitelist." msgstr "" "Gebruik deze instelling om elke berichtbijlage te verwijderen die\n" " overeenkomt met ��n van deze inhoudstypes. Elke regel moet een\n" " string zijn die een MIME type/subtype aanduidt,\n" " b.v. image/gif. Laat het subtype achterwege om alle\n" " delen te verwijderen die overeenkomen met het " "hoofdinhoudstype,\n" " b.v. image.\n" "\n" "

    Lege regels worden genegeerd.\n" "\n" "

    Zie ook doorlaattypes om inhoudstypes te defini�ren die wel mogen\n" " worden doorgelaten." #: Mailman/Gui/ContentFilter.py:94 msgid "" "Remove message attachments that don't have a matching\n" " content type. Leave this field blank to skip this filter\n" " test." msgstr "" "Doorlaattypes: verwijder berichtbijlagen die ni�t overeenkomen met ��n\n" " van de volgende inhoudstypes.\n" " Laat dit veld leeg om deze controle over te slaan." #: Mailman/Gui/ContentFilter.py:98 msgid "" "Use this option to remove each message attachment that does\n" " not have a matching content type. Requirements and formats " "are\n" " exactly like filter_mime_types.\n" "\n" "

    Note: if you add entries to this list but don't add\n" " multipart to this list, any messages with attachments\n" " will be rejected by the pass filter." msgstr "" "Gebruik deze instelling om elke berichtbijlage te verwijderen die ni�t\n" " overeenkomt met ��n van deze inhoudstypes. Vereisten en " "formats\n" " zijn gelijk aan die voor de filtertypes.\n" "\n" "

    Opmerking: als u waarden aan deze lijst toevoegt\n" " maar niet de waarde multipart, dan zal elk bericht " "met\n" " bijlagen worden geweigerd door de doorlaatfilter." #: Mailman/Gui/ContentFilter.py:108 msgid "" "Remove message attachments that have a matching filename\n" " extension." msgstr "" "Filtertypes: verwijder berichtbijlages die overeenkomen met ��n van de\n" " volgende bestandsstypen." #: Mailman/Gui/ContentFilter.py:112 msgid "" "Remove message attachments that don't have a matching\n" " filename extension. Leave this field blank to skip this " "filter\n" " test." msgstr "" "Doorlaattypes: verwijder berichtbijlagen die ni�t overeenkomen met ��n\n" " van de volgende bestandstypen.\n" " Laat dit veld leeg om deze controle over te slaan." #: Mailman/Gui/ContentFilter.py:117 msgid "" "Should Mailman collapse multipart/alternative to its\n" " first part content?" msgstr "" "Moet Mailman multipart/alternative verbergen en\n" " terugbrengen tot de inhoud van het eerste deel?" #: Mailman/Gui/ContentFilter.py:121 msgid "" "Should Mailman convert text/html parts to plain\n" " text? This conversion happens after MIME attachments have " "been\n" " stripped." msgstr "" "Moet Mailman text/html delen omzetten naar gewone tekst?\n" " Deze omzetting wordt uitgevoerd nadat MIME bijlagen zijn " "verwijderd." #: Mailman/Gui/ContentFilter.py:127 msgid "" "Action to take when a message matches the content filtering\n" " rules." msgstr "" "Te ondernemen actie als het bericht overeenkomt met de\n" " inhoudsfilter-regels." #: Mailman/Gui/ContentFilter.py:130 msgid "" "One of these actions is taken when the message matches one of\n" " the content filtering rules, meaning, the top-level\n" " content type matches one of the filter_mime_types, or the top-level content type does\n" " not match one of the\n" " pass_mime_types, or if after filtering the subparts of " "the\n" " message, the message ends up empty.\n" "\n" "

    Note this action is not taken if after filtering the " "message\n" " still contains content. In that case the message is always\n" " forwarded on to the list membership.\n" "\n" "

    When messages are discarded, a log entry is written\n" " containing the Message-ID of the discarded message. When\n" " messages are rejected or forwarded to the list owner, a reason\n" " for the rejection is included in the bounce message to the\n" " original author. When messages are preserved, they are saved " "in\n" " a special queue directory on disk for the site administrator " "to\n" " view (and possibly rescue) but otherwise discarded. This last\n" " option is only available if enabled by the site\n" " administrator." msgstr "" "Een van deze handelingen wordt ondernomen wanneer het bericht\n" " overeenkomt met ��n van de inhoudsfilter-regels: als het\n" " inhoudstype op het hoogste niveau overeenkomt met ��n van de " "filter_mime_types, of als het inhoudsttype op het hoogste " "niveau\n" " niet overeenkomt met ��n van de\n" " pass_mime_types, of als na het filteren van de onderdelen\n" " van het bericht als eindresultaat een leeg bericht overblijft.\n" "\n" "

    Let op dat deze handeling niet wordt ondernomen als na het\n" " filteren het bericht nog steeds inhoud bevat. In dat geval\n" " wordt het bericht altijd doorgestuurd naar de maillijstleden.\n" "\n" "

    Als berichten worden genegeerd, zal een regel aan het " "logboek\n" " worden toegevoegd met daarin het Message-ID van het genegeerde\n" " bericht. Als berichten worden geweigerd of doorgestuurd naar " "de\n" " lijsteigenaar, dan wordt een weigeringsreden toegevoegd aan " "het\n" " bouncebericht aan de oorspronkelijke verzender. Als berichten\n" " worden bewaard, dan worden ze opgeslagen in een speciale\n" " wachtrij-directory op de schijf van de sitebeheerder om nog te\n" " kunnen worden bekeken (en eventueel te worden gered), maar " "verder\n" " worden de berichten genegeerd. Deze laatste optie is alleen\n" " beschikbaar indien geactiveeerd door de sitebeheerder." #: Mailman/Gui/ContentFilter.py:171 msgid "Bad MIME type ignored: %(spectype)s" msgstr "Ongeldig MIME type genegeerd: %(spectype)s" #: Mailman/Gui/Digest.py:36 msgid "Digest options" msgstr "Verzamelmail" #: Mailman/Gui/Digest.py:44 msgid "Batched-delivery digest characteristics." msgstr "" "Verzamelmail-instellingen. In een verzamelmail (digest) zijn berichten van " "een bepaalde periode in ��n bericht gebundeld." #: Mailman/Gui/Digest.py:47 msgid "Can list members choose to receive list traffic bunched in digests?" msgstr "" "Mogen lijstleden voor de mogelijkheid kiezen om berichten gebundeld in " "verzamelmails te ontvangen?" #: Mailman/Gui/Digest.py:51 msgid "Digest" msgstr "Verzamelmail" #: Mailman/Gui/Digest.py:51 msgid "Regular" msgstr "Regulier" #: Mailman/Gui/Digest.py:52 msgid "Which delivery mode is the default for new users?" msgstr "Welk bezorgingsmethode is standaard voor nieuwe leden?" #: Mailman/Gui/Digest.py:55 msgid "MIME" msgstr "MIME" #: Mailman/Gui/Digest.py:55 msgid "Plain" msgstr "Gewoon" #: Mailman/Gui/Digest.py:56 msgid "When receiving digests, which format is default?" msgstr "Als verzamelmails worden ontvangen, welk format is dan standaard?" #: Mailman/Gui/Digest.py:59 msgid "How big in Kb should a digest be before it gets sent out?" msgstr "" "Wat is de limiet in Kb van een verzamelmail voordat het wordt verzonden?" #: Mailman/Gui/Digest.py:63 msgid "" "Should a digest be dispatched daily when the size threshold isn't reached?" msgstr "" "Moet een verzamelmail dagelijks worden verzonden, ook al is de limiet niet " "bereikt?" #: Mailman/Gui/Digest.py:67 msgid "Header added to every digest" msgstr "Header die wordt toegevoegd aan elke verzamelmail" #: Mailman/Gui/Digest.py:68 msgid "" "Text attached (as an initial message, before the table of contents) to the " "top of digests. " msgstr "" "Tekst toegevoegd (als een eerste bericht, voor de inhoudsopgave) aan het " "begin van verzamelmails. " #: Mailman/Gui/Digest.py:73 msgid "Footer added to every digest" msgstr "Voettekst toegevoegd aan elke verzamelmail" #: Mailman/Gui/Digest.py:74 msgid "Text attached (as a final message) to the bottom of digests. " msgstr "" "Tekst toegevoegd (als een laatste bericht) aan het einde van verzamelmails. " #: Mailman/Gui/Digest.py:80 msgid "How often should a new digest volume be started?" msgstr "" "Verzamelmails hebben 'volume' en 'editie' nummers, bv. Vol 3 #18 - 5 msgs." "Hoe vaak moet een nieuw verzamelmail-volume gestart worden?" #: Mailman/Gui/Digest.py:81 msgid "" "When a new digest volume is started, the volume number is\n" " incremented and the issue number is reset to 1." msgstr "" "Als een nieuw verzamelmail-volume wordt gestart, wordt het volumenummer\n" " automatisch opgehoogd en wordt met editie-nummer 1 gestart." #: Mailman/Gui/Digest.py:85 msgid "Should Mailman start a new digest volume?" msgstr "Moet Mailman een nieuw verzamelmail-volume starten?" #: Mailman/Gui/Digest.py:86 msgid "" "Setting this option instructs Mailman to start a new volume\n" " with the next digest sent out." msgstr "" "Het aanzetten van deze instelling zorgt ervoor dat Mailman een nieuw\n" " volume start bij de eerstvolgende verzamelmail die verzonden " "wordt." #: Mailman/Gui/Digest.py:90 msgid "" "Should Mailman send the next digest right now, if it is not\n" " empty?" msgstr "" "Moet Mailman de volgende verzamelmail nu versturen, mits deze\n" " niet leeg is?" #: Mailman/Gui/Digest.py:145 msgid "" "The next digest will be sent as volume\n" " %(volume)s, number %(number)s" msgstr "" "De volgende verzamelmail wordt verzonden als volume\n" " %(volume)s, nummer %(number)s" #: Mailman/Gui/Digest.py:150 msgid "A digest has been sent." msgstr "Een verzamelmail is verzonden." #: Mailman/Gui/Digest.py:152 msgid "There was no digest to send." msgstr "Er was geen verzamelmail om te verzenden." #: Mailman/Gui/GUIBase.py:169 msgid "Invalid value for variable: %(property)s" msgstr "Ongeldige waarde voor variabele: %(property)s" #: Mailman/Gui/GUIBase.py:173 msgid "Bad email address for option %(property)s: %(val)s" msgstr "Ongeldig e-mailadres voor instelling %(property)s: %(val)s" #: Mailman/Gui/GUIBase.py:199 msgid "" "The following illegal substitution variables were\n" " found in the %(property)s string:\n" " %(bad)s\n" "

    Your list may not operate properly until you correct " "this\n" " problem." msgstr "" "De volgende niet toegestane vervangende waardes werden\n" " aangetroffen in de %(property)s string:\n" " %(bad)s\n" "

    Het is mogelijk dat uw lijst niet naar behoren " "functioneert\n" " totdat u dit probleem heeft gecorrigeerd." #: Mailman/Gui/GUIBase.py:213 msgid "" "Your %(property)s string appeared to\n" " have some correctable problems in its new value.\n" " The fixed value will be used instead. Please\n" " double check that this is what you intended.\n" " " msgstr "" "Uw %(property)s string bleek problemen\n" " te bevatten n.a.v. nieuw ingevoerde waarden. Gelukkig\n" " waren deze te corrigeren, in zoverre dat in plaats " "daarvan\n" " de vaste waarde is gebruikt. Controleer alstublieft of " "de\n" " gecorrigeerde waarde datgene is wat u bedoelde.\n" " " #: Mailman/Gui/General.py:36 msgid "General Options" msgstr "Algemene instellingen" #: Mailman/Gui/General.py:50 msgid "Conceal the member's address" msgstr "Verberg het adres van het lid" #: Mailman/Gui/General.py:51 msgid "Acknowledge the member's posting" msgstr "Bevestig het ontvangen van berichten van het lid" #: Mailman/Gui/General.py:52 msgid "Do not send a copy of a member's own post" msgstr "Stuur geen berichten die het lid zelf heeft verstuurd" #: Mailman/Gui/General.py:54 msgid "Filter out duplicate messages to list members (if possible)" msgstr "Filter dubbele berichten aan lijstleden eruit (indien mogelijk)" #: Mailman/Gui/General.py:61 msgid "" "Fundamental list characteristics, including descriptive\n" " info and basic behaviors." msgstr "" "Algemene maillijstinstellingen, inclusief de hoofdinstellingen\n" " en beschrijvende gegevens." #: Mailman/Gui/General.py:64 msgid "General list personality" msgstr "Algemene lijstinstellingen" #: Mailman/Gui/General.py:67 msgid "The public name of this list (make case-changes only)." msgstr "" "De naam van deze lijst (alleen wijzigingen hoofdletters/kleine letters " "toegestaan!)" #: Mailman/Gui/General.py:68 msgid "" "The capitalization of this name can be changed to make it\n" " presentable in polite company as a proper noun, or to make an\n" " acronym part all upper case, etc. However, the name will be\n" " advertised as the email address (e.g., in subscribe " "confirmation\n" " notices), so it should not be otherwise altered. " "(Email\n" " addresses are not case sensitive, but they are sensitive to\n" " almost everything else :-)" msgstr "" "De letters in deze naam kunnen in kleine letters of hoofdletters\n" " worden veranderd om de naam toegankelijker te maken. De naam\n" " wordt echter ook gebruikt als het e-mailadres (b.v. in\n" " aanmeldingsbevestigingen), dus mag niet op\n" " andere manieren worden veranderd. (E-mailadressen zijn niet\n" " gevoelig voor het gebruik van hoofdletters/kleine letters,\n" " maar wel voor vrijwel al het andere :-)" #: Mailman/Gui/General.py:77 msgid "" "The list administrator email addresses. Multiple\n" " administrator addresses, each on separate line is okay." msgstr "" "De e-mailadressen van de lijstbeheerders. Bij meerdere lijstbeheerders\n" " moet elk e-mailadres op een aparte regel worden geplaatst." #: Mailman/Gui/General.py:80 msgid "" "There are two ownership roles associated with each mailing\n" " list. The list administrators are the people who " "have\n" " ultimate control over all parameters of this mailing list. " "They\n" " are able to change any list configuration variable available\n" " through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions;\n" " they are not able to change any list configuration variable, " "but\n" " they are allowed to tend to pending administration requests,\n" " including approving or rejecting held subscription requests, " "and\n" " disposing of held postings. Of course, the list\n" " administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into\n" " administrators and moderators, you must\n" " set a separate moderator password,\n" " and also provide the email\n" " addresses of the list moderators. Note that the field you\n" " are changing here specifies the list administrators." msgstr "" "Er zijn twee eigenaarsrollen betrokken bij elke\n" " maillijst. De lijstbeheerders zijn de mensen die de\n" " volledige controle hebben over alle instellingen van de\n" " maillijst. Zij kunnen elke beschikbare instelling wijzigen\n" " door middel van deze beheerpagina's.\n" "\n" "

    De lijstmoderatoren hebben wat beperktere\n" " bevoegdheden. Zijn kunnen geen enkele lijstinstelling\n" " wijzigen, maar zij mogen wel wachtende verzoeken afhandelen,\n" " zoals het goedkeuren en weigeren van aanmeldingsverzoeken\n" " en het verwijderen van vastgehouden berichten. Natuurlijk\n" " kunnen de lijstbeheerders ook wachtende verzoeken\n" " afhandelen.\n" "\n" "

    Om het mogelijk te maken dat de beheerstaken worden\n" " verdeeld tussen beheerders en moderatoren, moet u\n" " een apart moderatorwachtwoord instellen\n" " en ook de e-" "mailadressen\n" " van de lijstmoderatoren opgeven. Let op dat het veld dat u\n" " hier wijzigt de instelling is voor de lijstbeheerders." #: Mailman/Gui/General.py:101 msgid "" "The list moderator email addresses. Multiple\n" " moderator addresses, each on separate line is okay." msgstr "" "De e-mailadressen van de lijstmoderatoren. Bij meerdere moderatoren\n" " moet elk e-mailadres op een aparte regel worden geplaatst." #: Mailman/Gui/General.py:104 msgid "" "There are two ownership roles associated with each mailing\n" " list. The list administrators are the people who " "have\n" " ultimate control over all parameters of this mailing list. " "They\n" " are able to change any list configuration variable available\n" " through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions;\n" " they are not able to change any list configuration variable, " "but\n" " they are allowed to tend to pending administration requests,\n" " including approving or rejecting held subscription requests, " "and\n" " disposing of held postings. Of course, the list\n" " administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into\n" " administrators and moderators, you must\n" " set a separate moderator password,\n" " and also provide the email addresses of the list moderators in\n" " this section. Note that the field you are changing here\n" " specifies the list moderators." msgstr "" "Er zijn twee eigenaarsrollen betrokken bij elke\n" " maillijst. De lijstbeheerders zijn de mensen die de\n" " volledige controle hebben over alle instellingen van de\n" " maillijst. Zij kunnen elke beschikbare instelling wijzigen\n" " door middel van deze beheerpagina's.\n" "\n" "

    De lijstmoderatoren hebben wat beperktere\n" " bevoegdheden. Zijn kunnen geen enkele lijstinstelling\n" " wijzigen, maar zij mogen wel wachtende verzoeken afhandelen,\n" " zoals het goedkeuren en weigeren van aanmeldingsverzoeken\n" " en het verwijderen van vastgehouden berichten. Natuurlijk\n" " kunnen de lijstbeheerders ook wachtende verzoeken\n" " afhandelen.\n" "\n" "

    Om het mogelijk te maken dat de beheerstaken worden\n" " verdeeld tussen beheerders en moderatoren, moet u\n" " een apart moderatorwachtwoord instellen\n" " en ook de e-" "mailadressen\n" " van de lijstmoderatoren opgeven in deze sectie. Let op dat " "het\n" " veld dat u hier wijzigt de instelling is voor de " "lijstmoderatoren." #: Mailman/Gui/General.py:125 msgid "A terse phrase identifying this list." msgstr "Een korte zin die deze lijst omschrijft." #: Mailman/Gui/General.py:127 msgid "" "This description is used when the mailing list is listed with\n" " other mailing lists, or in headers, and so forth. It " "should\n" " be as succinct as you can get it, while still identifying " "what\n" " the list is." msgstr "" "Deze beschrijving wordt gebruikt als de maillijst wordt getoond in\n" " overzichten met andere maillijsten, in headers, etc. Ze\n" " moet zo kort en bondig mogelijk zijn, maar wel voldoende om\n" " te kunnen begrijpen wat voor soort maillijst het is." #: Mailman/Gui/General.py:133 msgid "" "An introductory description - a few paragraphs - about the\n" " list. It will be included, as html, at the top of the " "listinfo\n" " page. Carriage returns will end a paragraph - see the details\n" " for more info." msgstr "" "Een beschrijving van de lijst die als inleiding wordt gebruikt.\n" " Mag enkele alinea's lang zijn. Deze tekst zal worden getoond\n" " aan het begin van de lijstinformatiepagina. Harde regeleindes\n" " zorgen voor het be�indigen van een alinea - klik op 'Details'\n" " voor meer informatie." #: Mailman/Gui/General.py:137 msgid "" "The text will be treated as html except that\n" " newlines will be translated to <br> - so you can use " "links,\n" " preformatted text, etc, but don't put in carriage returns " "except\n" " where you mean to separate paragraphs. And review your changes " "-\n" " bad html (like some unterminated HTML constructs) can prevent\n" " display of the entire listinfo page." msgstr "" "De tekst zal worden behandeld als HTML, dus u kunt weblinks en andere HTML-\n" " geformatteerde tekst gebruiken. Uitzondering: harde\n" " regeleindes worden niet vertaald in <br> maar zorgen\n" " ervoor dat een nieuwe alinea (paragraph) wordt begonnen.\n" " Controleer uw veranderingen: fouten in HTML (zoals niet\n" " be�indigde tags) kunnen ervoor zorgen dat de\n" " lijstinformatiepagina niet wordt getoond." #: Mailman/Gui/General.py:145 msgid "Prefix for subject line of list postings." msgstr "Voorvoegsel aan het begin van de onderwerpregel van elk bericht." #: Mailman/Gui/General.py:146 msgid "" "This text will be prepended to subject lines of messages\n" " posted to the list, to distinguish mailing list messages in\n" " mailbox summaries. Brevity is premium here, it's ok to " "shorten\n" " long mailing list names to something more concise, as long as " "it\n" " still identifies the mailing list.\n" " You can also add a sequential number by %%d substitution\n" " directive. eg.; [listname %%d] -> [listname 123]\n" " (listname %%05d) -> (listname 00123)\n" " " msgstr "" "Deze tekst wordt aan het begin van de onderwerpregel geplaatst van\n" " alle via de lijst verstuurde berichten. Zo kan de\n" " ontvanger berichten van de maillijst onderscheiden van andere\n" " berichten in zijn mailbox. Maak de tekst zo kort mogelijk; " "lange\n" " maillijstnamen mag u hier desgewenst sterk afkorten, mits men " "de\n" " maillijst aan deze afkorting kan blijven herkennen.\n" " Met %%d kunt u kunt ook een volgnummer toevoegen,\n" " b.v.: [listname %%d] -> [listname 123]\n" " (listname %%05d) -> (listname 00123)\n" " " #: Mailman/Gui/General.py:157 msgid "" "Hide the sender of a message, replacing it with the list\n" " address (Removes From, Sender and Reply-To fields)" msgstr "" "Verberg de afzender van een bericht, door het adres te vervangen\n" " door het mailadres van de lijst (dit verwijdert de From,\n" " Sender en Reply-To velden)." #: Mailman/Gui/General.py:160 msgid "Reply-To: header munging" msgstr "Reply-To: wijzigingen" #: Mailman/Gui/General.py:163 msgid "" "Should any existing Reply-To: header found in the\n" " original message be stripped? If so, this will be done\n" " regardless of whether an explict Reply-To: header is\n" " added by Mailman or not." msgstr "" "Moet elk Reply-To: adres dat gevonden wordt\n" " in het oorspronkelijke bericht worden verwijderd?\n" " Zo ja, dan zal dit worden gedaan ongeacht het feit of er\n" " een expliciet Reply-To: adres wordt toegevoegd door " "Mailman\n" " of niet." #: Mailman/Gui/General.py:169 msgid "Explicit address" msgstr "Expliciet adres" #: Mailman/Gui/General.py:169 msgid "Poster" msgstr "Verzender" #: Mailman/Gui/General.py:169 msgid "This list" msgstr "Deze lijst" #: Mailman/Gui/General.py:170 msgid "" "Where are replies to list messages directed?\n" " Poster is strongly recommended for most " "mailing\n" " lists." msgstr "" "Aan wie moeten antwoorden op lijstberichten gericht worden?\n" " Verzender wordt sterk aangeraden voor de\n" " meeste maillijsten." #: Mailman/Gui/General.py:175 msgid "" "This option controls what Mailman does to the\n" " Reply-To: header in messages flowing through this\n" " mailing list. When set to Poster, no Reply-To:\n" " header is added by Mailman, although if one is present in the\n" " original message, it is not stripped. Setting this value to\n" " either This list or Explicit address causes\n" " Mailman to insert a specific Reply-To: header in all\n" " messages, overriding the header in the original message if\n" " necessary (Explicit address inserts the value of reply_to_address).\n" "\n" "

    There are many reasons not to introduce or override the\n" " Reply-To: header. One is that some posters depend on\n" " their own Reply-To: settings to convey their valid\n" " return address. Another is that modifying Reply-To:\n" " makes it much more difficult to send private replies. See `Reply-" "To'\n" " Munging Considered Harmful for a general discussion of " "this\n" " issue. See Reply-" "To\n" " Munging Considered Useful for a dissenting opinion.\n" "\n" "

    Some mailing lists have restricted posting privileges, with " "a\n" " parallel list devoted to discussions. Examples are `patches' " "or\n" " `checkin' lists, where software changes are posted by a " "revision\n" " control system, but discussion about the changes occurs on a\n" " developers mailing list. To support these types of mailing\n" " lists, select Explicit address and set the\n" " Reply-To: address below to point to the parallel\n" " list." msgstr "" "Deze instelling regelt wat Mailman moet doen met het\n" " Reply-To: adres in berichten die via deze maillijst\n" " worden verstuurd. Wanneer dit op Verzender wordt\n" " ingesteld, zal geen Reply-To: adres worden toegevoegd " "door\n" " Mailman, terwijl een in het oorspronkelijk bericht aanwezig\n" " adres niet wordt verwijderd. Wanneer dit op Deze lijst\n" " of Expliciet adres wordt ingesteld, zorgt Mailman\n" " ervoor dat een specifiek Reply-To: adres wordt\n" " toegevoegd aan alle berichten, waarbij het oorspronkelijke " "adres\n" " wordt overschreven indien nodig. (Expliciet adres\n" " voegt het onder reply_to_address\n" " ingevoerde adres toe).\n" " \n" "

    Er zijn vele redenen om geen Reply-To:\n" " adres toe te voegen of te overschrijven. Sommige afzenders\n" " zijn afhankelijk van hun eigen Reply-To:\n" " instelling om berichten op hun e-mailadres binnen te krijgen.\n" " Een andere reden is dat het aanpassen van het Reply-To: adres\n" " het veel moeilijker maakt om priv�-antwoorden te versturen. Zie " "`Reply-" "To'\n" " Munging Considered Harmful voor een algemene bespreking van " "dit\n" " onderwerp. Zie Reply-" "To\n" " Munging Considered Useful voor een tegengestelde visie.\n" "\n" "

    Sommige maillijsten hebben beperkte verzendprivileges,\n" " met een parallelle lijst bestemd voor discussies. Voorbeelden\n" " zijn `patches' of `checkin' lijsten, waar meldingen van\n" " softwareveranderingen worden verzonden door een revisie\n" " controle systeem, maar waarbij discussie over de veranderingen\n" " wordt gevoerd via een ontwikkelaarsmaillijst. Om dit type\n" " maillijsten te ondersteunen, kunt u de optie Expliciet\n" " adres kiezen en het hieronder vermelde Reply-To:\n" " adres laten verwijzen naar de discussielijst." #: Mailman/Gui/General.py:207 msgid "Explicit Reply-To: header." msgstr "Expliciet Reply-To: adres." #: Mailman/Gui/General.py:209 msgid "" "This is the address set in the Reply-To: header\n" " when the reply_goes_to_list\n" " option is set to Explicit address.\n" "\n" "

    There are many reasons not to introduce or override the\n" " Reply-To: header. One is that some posters depend on\n" " their own Reply-To: settings to convey their valid\n" " return address. Another is that modifying Reply-To:\n" " makes it much more difficult to send private replies. See `Reply-" "To'\n" " Munging Considered Harmful for a general discussion of " "this\n" " issue. See Reply-" "To\n" " Munging Considered Useful for a dissenting opinion.\n" "\n" "

    Some mailing lists have restricted posting privileges, with " "a\n" " parallel list devoted to discussions. Examples are `patches' " "or\n" " `checkin' lists, where software changes are posted by a " "revision\n" " control system, but discussion about the changes occurs on a\n" " developers mailing list. To support these types of mailing\n" " lists, specify the explicit Reply-To: address here. " "You\n" " must also specify Explicit address in the\n" " reply_goes_to_list\n" " variable.\n" "\n" "

    Note that if the original message contains a\n" " Reply-To: header, it will not be changed." msgstr "" "Dit is het in te stellen Reply-To: adres als de reply_goes_to_list\n" " optie is ingesteld op Expliciet adres.\n" "\n" "

    Er zijn vele redenen om geen Reply-To:\n" " adres toe te voegen of te overschrijven. Sommige afzenders\n" " zijn afhankelijk van hun eigen Reply-To:\n" " instelling om berichten op hun e-mailadres binnen te krijgen.\n" " Een andere reden is dat het aanpassen van het Reply-To: adres\n" " het veel moeilijker maakt om priv�-antwoorden te versturen. Zie " "'Reply-" "To\n" " Munging' Considered Harmful voor een algemene bespreking " "van dit\n" " onderwerp. Zie Reply-" "To\n" " Munging Considered Useful voor een tegengestelde visie.\n" "\n" "

    Sommige maillijsten hebben beperkte verzendprivileges,\n" " met een parallelle lijst bestemd voor discussies. Voorbeelden\n" " zijn `patches' of checkin' lijsten, waar meldingen van\n" " softwareveranderingen worden verzonden door een revisie\n" " controle systeem, maar waarbij discussie over de veranderingen\n" " wordt gevoerd via een ontwikkelaarsmaillijst. Om dit type\n" " maillijsten te ondersteunen, moet u hier het expliciete\n" " Reply-To: adres invoeren. U moet ook de optie\n" " Expliciet adres aanvinken bij de\n" " reply_goes_to_list instelling.\n" "\n" "

    Let op: als het oorspronkelijke bericht een\n" " Reply-To: adres bevat, zal dit niet wordt gewijzigd." #: Mailman/Gui/General.py:238 msgid "Umbrella list settings" msgstr "Instellingen voor overkoepelende lijsten" #: Mailman/Gui/General.py:241 msgid "" "Send password reminders to, eg, \"-owner\" address instead of\n" " directly to user." msgstr "" "Verstuur wachtwoordherinneringen naar de lijstbeheerders in\n" " plaats van naar het lijstadres." #: Mailman/Gui/General.py:244 msgid "" "Set this to yes when this list is intended to cascade only\n" " to other mailing lists. When set, meta notices like\n" " confirmations and password reminders will be directed to an\n" " address derived from the member's address - it will have the\n" " value of \"umbrella_member_suffix\" appended to the member's\n" " account name." msgstr "" "Stel dit in op ja als de lijst uitsluitend bedoeld is om als\n" " overkoepelende maillijst van andere maillijsten te fungeren.\n" " Dit zorgt ervoor dat meta berichten - zoals bevestigingen en\n" " wachtwoordherinneringen - worden gericht aan een adres\n" " afgeleid van het betreffende lijstadres: het achtervoegsel\n" " \"umbrella_member_suffix\" wordt toegevoegd." #: Mailman/Gui/General.py:252 msgid "" "Suffix for use when this list is an umbrella for other\n" " lists, according to setting of previous \"umbrella_list\"\n" " setting." msgstr "" "Achtervoegsel als deze lijst gebruikt wordt als\n" " overkoepelende lijst voor andere maillijsten, volgens de\n" " hieraan voorafgaande \"umbrella_list\" instelling." #: Mailman/Gui/General.py:256 msgid "" "When \"umbrella_list\" is set to indicate that this list has\n" " other mailing lists as members, then administrative notices " "like\n" " confirmations and password reminders need to not be sent to " "the\n" " member list addresses, but rather to the owner of those member\n" " lists. In that case, the value of this setting is appended to\n" " the member's account name for such notices. `-owner' is the\n" " typical choice. This setting has no effect when \"umbrella_list" "\"\n" " is \"No\"." msgstr "" "Als \"umbrella_list\" zodanig is ingesteld dat deze lijst uitsluitend\n" " andere maillijsten als leden heeft, dan kunnen administratieve\n" " berichten zoals bevestigingen en wachtwoordbevestigingen beter\n" " niet naar de lijstadressen worden gestuurd, maar naar de\n" " beheerders van deze maillijsten. In dat geval zal de hier\n" " ingevoerde waarde worden toegevoegd aan de betreffende\n" " lijstadressen. `-owner' is de gangbare keuze. Deze instelling\n" " heeft geen effect als de \"umbrella_list\" optie op \"Nee\" is " "gezet." #: Mailman/Gui/General.py:268 msgid "Send monthly password reminders?" msgstr "Verstuur maandelijkse wachtwoordherinneringen?" #: Mailman/Gui/General.py:270 msgid "" "Turn this on if you want password reminders to be sent once\n" " per month to your members. Note that members may disable " "their\n" " own individual password reminders." msgstr "" "Zet dit aan als u wilt dat eens per maand wachtwoordherinneringen\n" " aan uw leden worden verzonden. Leden kunnen desgewenst\n" " deze wachtwoordherinneringen uitschakelen op hun\n" " persoonlijke instellingenpagina." #: Mailman/Gui/General.py:275 msgid "" "List-specific text prepended to new-subscriber welcome\n" " message" msgstr "" "Lijstspecifieke tekst toegevoegd aan het begin van het\n" " welkomstbericht voor nieuwe leden." #: Mailman/Gui/General.py:278 msgid "" "This value, if any, will be added to the front of the\n" " new-subscriber welcome message. The rest of the welcome " "message\n" " already describes the important addresses and URLs for the\n" " mailing list, so you don't need to include any of that kind of\n" " stuff here. This should just contain mission-specific kinds " "of\n" " things, like etiquette policies or team orientation, or that " "kind\n" " of thing.\n" "\n" "

    Note that this text will be wrapped, according to the\n" " following rules:\n" "

    • Each paragraph is filled so that no line is longer " "than\n" " 70 characters.\n" "
    • Any line that begins with whitespace is not filled.\n" "
    • A blank line separates paragraphs.\n" "
    " msgstr "" "Deze tekst, indien ingevuld, zal aan het begin van het\n" " welkomstbericht aan een nieuw lid worden toegevoegd. De\n" " rest van het welkomstbericht beschrijft de voor de\n" " maillijst belangrijke mail- en webadressen, dus u hoeft\n" " dergelijk soort informatie niet zelf toe te voegen. De " "tekst moet dus simpelweg het doel van uw maillijst " "beschrijven,\n" " uw beleid toelichten t.a.v. het versturen van berichten via\n" " de lijst, etc.\n" "\n" "

    Er zal terugloop in de tekst plaatsvinden volgens de\n" " volgende regels:\n" "

    • Iedere alinea wordt zodanig gevuld dat geen enkele\n" " regel langer is dan 70 lettertekens.\n" "
    • Elke regel die begint met een spatie wordt niet " "gevuld.\n" "
    • Een lege regel scheidt alinea's.\n" "
    " #: Mailman/Gui/General.py:295 msgid "Send welcome message to newly subscribed members?" msgstr "Stuur een welkomstbericht naar nieuwe leden?" #: Mailman/Gui/General.py:296 msgid "" "Turn this off only if you plan on subscribing people manually\n" " and don't want them to know that you did so. This option is " "most\n" " useful for transparently migrating lists from some other " "mailing\n" " list manager to Mailman." msgstr "" "Zet dit uit als u van plan bent om personen handmatig aan te melden\n" " zonder dat zij dat merken. Deze instelling is zeer nuttig\n" " wanneer u lijsten onopgemerkt wilt laten verhuizen van een\n" " ander maillijstprogramma naar Mailman." #: Mailman/Gui/General.py:302 msgid "" "Text sent to people leaving the list. If empty, no special\n" " text will be added to the unsubscribe message." msgstr "" "Tekst die wordt verzonden naar personen die de lijst verlaten.\n" " Als u dit veld leeg laat, zal geen speciale tekst worden\n" " toegevoegd aan het afmeldingsbericht." #: Mailman/Gui/General.py:306 msgid "Send goodbye message to members when they are unsubscribed?" msgstr "Verstuur een afmeldingsbericht aan leden als ze worden afgemeld?" #: Mailman/Gui/General.py:309 msgid "" "Should the list moderators get immediate notice of new\n" " requests, as well as daily notices about collected ones?" msgstr "" "Moeten de lijstmoderators onmiddelijk bericht krijgen van nieuwe\n" " verzoeken, naast dagelijkse overzichten van alle wachtende\n" " verzoeken?" #: Mailman/Gui/General.py:312 msgid "" "List moderators (and list administrators) are sent daily\n" " reminders of requests pending approval, like subscriptions to " "a\n" " moderated list, or postings that are being held for one reason " "or\n" " another. Setting this option causes notices to be sent\n" " immediately on the arrival of new requests as well." msgstr "" "Lijstmoderators (en lijstbeheerders) krijgen ter herinnering dagelijks\n" " een bericht met een overzicht van de verzoeken die wachten\n" " op goedkeuring, zoals aanmeldingen voor een gemodereerde lijst\n" " of berichten die worden vastgehouden om bepaalde redenen. Het\n" " activeren van deze optie zorgt ervoor dat tevens een bericht\n" " wordt gestuurd zodra een nieuw verzoek binnenkomt." #: Mailman/Gui/General.py:319 msgid "" "Should administrator get notices of subscribes and\n" " unsubscribes?" msgstr "" "Moet de beheerder bericht krijgen over aanmeldingen\n" " en afmeldingen?" #: Mailman/Gui/General.py:324 msgid "Send mail to poster when their posting is held for approval?" msgstr "" "Een melding versturen naar de afzender als zijn/haar bericht wordt " "vastgehouden voor goedkeuring?" #: Mailman/Gui/General.py:327 msgid "Additional settings" msgstr "Aanvullende instellingen" #: Mailman/Gui/General.py:330 msgid "Emergency moderation of all list traffic." msgstr "Noodmoderatie voor al het lijstverkeer." #: Mailman/Gui/General.py:331 msgid "" "When this option is enabled, all list traffic is emergency\n" " moderated, i.e. held for moderation. Turn this option on when\n" " your list is experiencing a flamewar and you want a cooling " "off\n" " period." msgstr "" "Als de noodmoderatie-instelling is geactiveerd, zal al het lijstverkeer " "worden\n" " vastgehouden voor moderatie. Zet deze optie aan als er op uw " "lijst\n" " een zogenaamde flamewar (ruzie) aan de gang is en u een\n" " afkoelperiode wilt instellen." #: Mailman/Gui/General.py:343 msgid "" "Default options for new members joining this list." msgstr "" "Standaardinstellingen voor nieuwe leden op deze lijst." #: Mailman/Gui/General.py:346 msgid "" "When a new member is subscribed to this list, their initial\n" " set of options is taken from the this variable's setting." msgstr "" "Als een nieuw lid wordt aangemeld op deze lijst, zal deze set van\n" " opties automatisch worden overgenomen als initi�le\n" " instellingen." #: Mailman/Gui/General.py:350 msgid "" "(Administrivia filter) Check postings and intercept ones\n" " that seem to be administrative requests?" msgstr "" "(Beheerfilter) Controleer berichten en onderschep de\n" " berichten die beheerdersverzoeken lijken te zijn?" #: Mailman/Gui/General.py:353 msgid "" "Administrivia tests will check postings to see whether it's\n" " really meant as an administrative request (like subscribe,\n" " unsubscribe, etc), and will add it to the the administrative\n" " requests queue, notifying the administrator of the new " "request,\n" " in the process." msgstr "" "Beheertesten controleren de berichten op het feit of ze echt bedoeld\n" " zijn als beheersverzoeken (zoals aanmeldingen,\n" " afmeldingen, etc). Ze zorgen ervoor dat deze berichten\n" " worden toegevoegd aan de lijst van wachtende verzoeken,\n" " en dat de beheerder een melding krijgt dat een nieuw\n" " verzoek is binnengekomen." #: Mailman/Gui/General.py:360 msgid "" "Maximum length in kilobytes (KB) of a message body. Use 0\n" " for no limit." msgstr "" "Maximale omvang van een bericht in kilobytes (KB).\n" " Gebruik 0 als u geen limiet wilt instellen." #: Mailman/Gui/General.py:364 msgid "" "Maximum number of members to show on one page of the\n" " Membership List." msgstr "" "Maximum aantal leden dat wordt getoond op een pagina van de\n" " ledenlijst." #: Mailman/Gui/General.py:368 msgid "Host name this list prefers for email." msgstr "Hostnaam die voor deze lijst gewenst is m.b.t. e-mail." #: Mailman/Gui/General.py:370 msgid "" "The \"host_name\" is the preferred name for email to\n" " mailman-related addresses on this host, and generally should " "be\n" " the mail host's exchanger address, if any. This setting can " "be\n" " useful for selecting among alternative names of a host that " "has\n" " multiple addresses." msgstr "" "De \"host_name\" is de voor e-mail benodigde hostnaam m.b.t. de\n" " aan Mailman gerelateerde adressen, en is over\n" " het algemeen het uitwisseladres van de mailhost,\n" " mits dit is ingesteld. Deze instelling kan nodig zijn\n" " indien uit meerdere hostnamen geselecteerd moet worden\n" " bij een host met meerdere adressen." #: Mailman/Gui/General.py:382 msgid "" "Should messages from this mailing list include the\n" " RFC 2369\n" " (i.e. List-*) headers? Yes is highly\n" " recommended." msgstr "" "Moeten berichten van deze maillijst\n" " RFC 2369\n" " (i.e. List-*) headers bevatten? Ja\n" " wordt sterk aangeraden." #: Mailman/Gui/General.py:387 msgid "" "RFC 2369 defines a set of List-* headers that are\n" " normally added to every message sent to the list " "membership.\n" " These greatly aid end-users who are using standards " "compliant\n" " mail readers. They should normally always be enabled.\n" "\n" "

    However, not all mail readers are standards compliant " "yet,\n" " and if you have a large number of members who are using\n" " non-compliant mail readers, they may be annoyed at these\n" " headers. You should first try to educate your members as " "to\n" " why these headers exist, and how to hide them in their " "mail\n" " clients. As a last resort you can disable these headers, " "but\n" " this is not recommended (and in fact, your ability to " "disable\n" " these headers may eventually go away)." msgstr "" "RFC 2369 definieert een set van List-* headers die normaliter\n" " worden toegevoegd aan elk bericht dat via de maillijst\n" " wordt verzonden. Dergelijke headers zijn een grote hulp\n" " voor eindgebruikers met mailprogramma's die volgens de\n" " gangbare mailstandaarden werken. Deze optie dient\n" " derhalve normaliter altijd te worden geactiveerd.\n" "\n" "

    Helaas zijn er nog mailprogramma's die niet met de\n" " gangbare mailstandaarden werken. Als u een groot aantal\n" " leden heeft dat dergelijke mailprogramma's gebruikt,\n" " kunnen deze zich mogelijk irriteren aan deze headers.\n" " U zou eerst moeten proberen uw leden de noodzaak van\n" " van deze headers uit te leggen en hoe ze deze kunnen\n" " verbergen in hun mailprogramma. In laatste instantie\n" " zou u deze headers kunnen uitschakelen, maar dit wordt\n" " niet aangeraden (en in feite zal de mogelijkheid om\n" " deze headers uit te schakelen in de toekomst mogelijk\n" " verdwijnen)." #: Mailman/Gui/General.py:405 msgid "Should postings include the List-Post: header?" msgstr "Moeten berichten de List-Post: header bevatten?" #: Mailman/Gui/General.py:406 msgid "" "The List-Post: header is one of the headers\n" " recommended by\n" " RFC 2369.\n" " However for some announce-only mailing lists, only a\n" " very select group of people are allowed to post to the list; " "the\n" " general membership is usually not allowed to post. For lists " "of\n" " this nature, the List-Post: header is misleading.\n" " Select No to disable the inclusion of this header. " "(This\n" " does not affect the inclusion of the other List-*:\n" " headers.)" msgstr "" "De List-Post: header is een van de headers\n" " aanbevolen door \n" " RFC 2369.\n" " Echter, bij sommige zgn. announce-only maillijsten\n" " mag alleen een select aantal personen berichten naar de\n" " maillijst sturen; de algemene leden mogen doorgaans g��n\n" " berichten sturen. Voor dit soort lijsten is de\n" " List-Post: header misleidend. Kies Nee om\n" " de toevoeging van deze header uit te schakelen. (Dit heeft\n" " geen effect op de toevoeging van de andere\n" " List-*:-headers.)" #: Mailman/Gui/General.py:421 msgid "" "Discard held messages older than this number of days.\n" " Use 0 for no automatic discarding." msgstr "" "Negeer vastgehouden berichten die ouder zijn dan dit\n" " aantal dagen. Gebruik 0 indien u berichten\n" " niet automatisch wilt negeren." #: Mailman/Gui/General.py:431 msgid "" "real_name attribute not\n" " changed! It must differ from the list's name by case\n" " only." msgstr "" "real_name attribuut niet\n" " gewijzigd! Het mag alleen in hoofdletters of kleine letters\n" " afwijken van de lijstnaam." #: Mailman/Gui/General.py:448 msgid "" "The info attribute you saved\n" "contains suspicious HTML that could potentially expose your users to cross-" "site\n" "scripting attacks. This change has therefore been rejected. If you still " "want\n" "to make these changes, you must have shell access to your Mailman server.\n" "This change can be made with bin/withlist or with bin/config_list by " "setting\n" "mlist.info.\n" " " msgstr "" "Het info attribuut dat u heeft bewaard\n" "bevat verdachte HTML die uw gebruikers mogelijkerwijs blootstelt aan cross-" "site\n" "scripting aanvallen. Deze wijziging is daarom geweigerd. Als u toch deze\n" "wijzigingen wilt aanbrengen, moet u shell access hebben voor uw Mailman " "server.\n" "Deze wijziiging kan gemaakt worden met bin/withlist of met bin/config_list " "door het\n" "instellen van mlist.info.\n" #: Mailman/Gui/General.py:459 msgid "" "admin_member_chunksize attribute not\n" " changed! It must be an integer > 0." msgstr "" "admin_member_chunksize attribuut niet\n" " veranderd! Het moet een heel getal zijn > 0." #: Mailman/Gui/General.py:469 msgid "" "You cannot add a Reply-To: to an explicit\n" " address if that address is blank. Resetting these values." msgstr "" "U kunt geen Reply-To: toevoegen aan een expliciet\n" " adres als dat adres leeg is. Deze waarden worden gereset." #: Mailman/Gui/Language.py:34 msgid "Language options" msgstr "Talen" #: Mailman/Gui/Language.py:66 msgid "Natural language (internationalization) options." msgstr "Taalinstellingen (internationalisering)." #: Mailman/Gui/Language.py:71 msgid "Default language for this list." msgstr "Standaardtaal voor deze lijst." #: Mailman/Gui/Language.py:72 msgid "" "This is the default natural language for this mailing list.\n" " If more than " "one\n" " language is supported then users will be able to select " "their\n" " own preferences for when they interact with the list. All " "other\n" " interactions will be conducted in the default language. This\n" " applies to both web-based and email-based messages, but not to\n" " email posted by list members." msgstr "" "Dit is de standaardtaal voor deze maillijst.\n" " Als er meer\n" " dan ��n taal wordt ondersteund dan kunnen gebruikers hun\n" " voorkeurstaal kiezen als zij de maillijst gebruiken. Alle " "andere\n" " handelingen vinden plaats in de standaardtaal. Dit geldt zowel\n" " de webinterface als de door Mailman gegenereerde e-" "mailberichten,\n" " maar niet de door lijstleden verstuurde berichten." #: Mailman/Gui/Language.py:82 msgid "Languages supported by this list." msgstr "Talen ondersteund door deze lijst:" #: Mailman/Gui/Language.py:84 msgid "" "These are all the natural languages supported by this list.\n" " Note that the\n" " default\n" " language must be included." msgstr "" "Dit zijn alle talen die ondersteund worden door deze lijst.\n" " Let op dat de\n" " standaardtaal\n" " aangevinkt dient te zijn." #: Mailman/Gui/Language.py:90 msgid "Always" msgstr "Altijd" #: Mailman/Gui/Language.py:90 msgid "As needed" msgstr "Indien nodig" #: Mailman/Gui/Language.py:90 msgid "Never" msgstr "Nooit" #: Mailman/Gui/Language.py:91 msgid "" "Encode the\n" " subject\n" " prefix even when it consists of only ASCII characters?" msgstr "" "Codeer het\n" " onderwerp-" "voorvoegsel\n" " ook al bestaat dit uit alleen ASCII tekens?" #: Mailman/Gui/Language.py:95 msgid "" "If your mailing list's default language uses a non-ASCII\n" " character set and the prefix contains non-ASCII characters, " "the\n" " prefix will always be encoded according to the relevant\n" " standards. However, if your prefix contains only ASCII\n" " characters, you may want to set this option to Never " "to\n" " disable prefix encoding. This can make the subject headers\n" " slightly more readable for users with mail readers that don't\n" " properly handle non-ASCII encodings.\n" "\n" "

    Note however, that if your mailing list receives both " "encoded\n" " and unencoded subject headers, you might want to choose As\n" " needed. Using this setting, Mailman will not encode " "ASCII\n" " prefixes when the rest of the header contains only ASCII\n" " characters, but if the original header contains non-ASCII\n" " characters, it will encode the prefix. This avoids an " "ambiguity\n" " in the standards which could cause some mail readers to " "display\n" " extra, or missing spaces between the prefix and the original\n" " header." msgstr "" "Als de standaardtaal van uw maillijst een niet-ASCII\n" " tekenset gebruikt en het voorvoegsel niet-ASCII tekens bevat,\n" " zal het voorvoegsel altijd worden gecodeerd volgens de\n" " de toepasselijke standaarden. Mocht uw voorvoegsel echter\n" " alleen ASCII tekens bevatten, dan wilt u deze optie wellicht\n" " op Nooit instellen om codering van het voorvoegsel\n" " uit te schakelen. Dit kan de onderwerpheaders enigszins\n" " leesbaarder maken voor gebruikers met mailprogramma's die\n" " niet goed met niet-ASCII coderingen overweg kunnen.\n" "\n" "

    Let er op dat, als uw maillijst zowel gecodeerde als\n" " ongecodeerde onderwerpheaders ontvangt, u ook kunt kiezen\n" " voor Indien nodig. Door deze instelling te\n" " gebruiken, zal Mailman ASCII voorvoegsels niet coderen als\n" " de rest van de header alleen ASCII tekens bevat, en het\n" " voorvoegsel w�l coderen als de oorspronkelijke header\n" " niet-ASCII tekens bevat. Hiermee worden dubbelzinnigheden\n" " in de standaarden vermeden, die in sommige mailprogramma's\n" " kunnen leiden tot extra of ontbrekende spaties tussen het\n" " voorvoegsel en de oorspronkelijke header." #: Mailman/Gui/Membership.py:26 msgid "Membership Management..." msgstr "Ledenbeheer" #: Mailman/Gui/Membership.py:30 msgid "Membership List" msgstr "Ledenlijst" #: Mailman/Gui/Membership.py:31 msgid "Mass Subscription" msgstr "Meerdere leden aanmelden" #: Mailman/Gui/Membership.py:32 msgid "Mass Removal" msgstr "Meerdere leden afmelden" #: Mailman/Gui/NonDigest.py:35 msgid "Non-digest options" msgstr "Reguliere mail" #: Mailman/Gui/NonDigest.py:43 msgid "Policies concerning immediately delivered list traffic." msgstr "Beleid m.b.t. de reguliere, direct verstuurde mail." #: Mailman/Gui/NonDigest.py:46 msgid "" "Can subscribers choose to receive mail immediately, rather\n" " than in batched digests?" msgstr "" "Mogen leden ervoor kiezen om mail direct te ontvangen, in\n" " plaats van gebundeld in verzamelmails?" #: Mailman/Gui/NonDigest.py:53 msgid "Full Personalization" msgstr "Volledige verpersoonlijking" #: Mailman/Gui/NonDigest.py:55 msgid "" "Should Mailman personalize each non-digest delivery?\n" " This is often useful for announce-only lists, but read the details\n" " section for a discussion of important performance\n" " issues." msgstr "" "Moet Mailman elk regulier bericht verpersoonlijken?\n" " Dit is vaak nuttig bij zgn. announce-only lijsten,\n" " maar lees de sectie details\n" " voor een belangrijke toelichting m.b.t. hoe dit de\n" " performance van uw site danig kan beinvloeden." #: Mailman/Gui/NonDigest.py:61 msgid "" "Normally, Mailman sends the regular delivery messages to\n" " the mail server in batches. This is much more efficent\n" " because it reduces the amount of traffic between Mailman " "and\n" " the mail server.\n" "\n" "

    However, some lists can benefit from a more " "personalized\n" " approach. In this case, Mailman crafts a new message for\n" " each member on the regular delivery list. Turning this\n" " feature on may degrade the performance of your site, so " "you\n" " need to carefully consider whether the trade-off is worth " "it,\n" " or whether there are other ways to accomplish what you " "want.\n" " You should also carefully monitor your system load to make\n" " sure it is acceptable.\n" "\n" "

    Select No to disable personalization and send\n" " messages to the members in batches. Select Yes " "to\n" " personalize deliveries and allow additional substitution\n" " variables in message headers and footers (see below). In\n" " addition, by selecting Full Personalization, the\n" " To header of posted messages will be modified " "to\n" " include the member's address instead of the list's posting\n" " address.\n" "\n" "

    When personalization is enabled, a few more expansion\n" " variables that can be included in the message header " "and\n" " message footer.\n" "\n" "

    These additional substitution variables will be " "available\n" " for your headers and footers, when this feature is " "enabled:\n" "\n" "

    \n" " " msgstr "" "Normaliter verstuurt Mailman reguliere berichten in zgn. batches (i.e.\n" " groepsgewijs) naar de mailserver. Dit is veel effici�nter\n" " omdat het de hoeveelheid verkeer tussen Mailman en de\n" " mailserver beperkt.\n" "\n" "

    Sommige lijsten kunnen echter profijt hebben van een\n" " persoonlijkere aanpak. In dat geval zal Mailman een " "bericht\n" " aanmaken voor elk lid apart lid. Het activeren van deze\n" " optie kan de performance van uw site danig beinvloeden,\n" " dus u dient goed te overwegen of het dat waard is,\n" " of dat er andere manieren zijn om te bereiken wat u wilt.\n" " U dient ook de belasting van uw systeem goed te " "controleren\n" " om te kijken of deze acceptabel is.\n" "\n" "

    Kies Nee om verpersoonlijking uit te schakelen\n" " en berichten aan leden in batches te verzenden. Kies\n" " Ja om de ontvangst van verpersoonlijkte\n" " berichten en de daarmee gepaard gaande vervangingen van\n" " kopteksten en voetteksten toe te staan (zie hieronder).\n" " Door Volledige verpersoonlijking te selecteren,\n" " zal ook de To header van verzonden berichten\n" " veranderd worden: in de header zal het adres van het lid\n" " opgenomen worden i.p.v. het lijstadres.\n" "\n" "

    Als verpersoonlijking is geactiveerd, kunnen wat meer\n" " variabelen worden opgenomen in de koptekst\n" " en\n" " voettekst.\n" "\n" "

    Deze extra variabelen zijn beschikbaar voor uw kop- en\n" " voetteksten, mits deze zijn geactiveerd:\n" "\n" "

    • user_address - Het adres van het lid,\n" " in kleine letters.\n" "
    • user_delivered_to - Het adres van het lid,\n" " in kleine en hoofdletters, zoals dit is aangemeld.\n" "
    • user_password - Wachtwoord van het lid.\n" "
    • user_name - Volledige naam van het lid.\n" "
    • user_optionsurl - De url van de\n" " persoonlijke instellingenpagina van het lid.\n" "
    \n" " " #: Mailman/Gui/NonDigest.py:110 msgid "" "When personalization is " "enabled\n" "for this list, additional substitution variables are allowed in your " "headers\n" "and footers:\n" "\n" "
    • user_address - The address of the user,\n" " coerced to lower case.\n" "
    • user_delivered_to - The case-preserved address\n" " that the user is subscribed with.\n" "
    • user_password - The user's password.\n" "
    • user_name - The user's full name.\n" "
    • user_optionsurl - The url to the user's option\n" " page.\n" "
    \n" msgstr "" "Als verpersoonlijking is " "geactiveerd\n" "voor deze lijst, kunnen wat meer variabelen worden opgenomen in uw " "kopteksten\n" "en voetteksten:\n" "\n" "
    • user_address - Het adres van het lid,\n" " in kleine letters.\n" "
    • user_delivered_to - Het adres van het lid,\n" " in kleine en hoofdletters, zoals dit is aangemeld.\n" "
    • user_password - Wachtwoord van het lid.\n" "
    • user_name - Volledige naam van het lid.\n" "
    • user_optionsurl - De url van de\n" " persoonlijke instellingenpagina van het lid.\n" "
    \n" #: Mailman/Gui/NonDigest.py:129 msgid "Header added to mail sent to regular list members" msgstr "Koptekst toegevoegd aan reguliere berichten" #: Mailman/Gui/NonDigest.py:130 msgid "" "Text prepended to the top of every immediately-delivery\n" " message. " msgstr "" "Tekst die aan het begin van elk direct verstuurd bericht\n" " wordt geplaatst. " #: Mailman/Gui/NonDigest.py:134 msgid "Footer added to mail sent to regular list members" msgstr "Voettekst toegevoegd aan reguliere berichten" #: Mailman/Gui/NonDigest.py:135 msgid "" "Text appended to the bottom of every immediately-delivery\n" " message. " msgstr "" "Tekst die aan het eind van elk direct verstuurd bericht\n" " wordt geplaatst. " #: Mailman/Gui/NonDigest.py:141 msgid "Scrub attachments of regular delivery message?" msgstr "Wilt u bijlagen van het te verzenden bericht scrubben?" #: Mailman/Gui/NonDigest.py:142 msgid "" "When you scrub attachments, they are stored in archive\n" " area and links are made in the message so that the member can\n" " access via web browser. If you want the attachments totally\n" " disappear, you can use content filter options." msgstr "" "Als u bijlagen van het bericht scrubt, zullen deze worden " "opgeslagen in\n" " een archiefruimte en zullen links in het bericht worden " "geplaatst\n" " die het lid kan bezoeken in zijn webbrowser. Als u bijlagen " "geheel\n" " wilt doen verdwijnen, dient u de inhoudsfilter-opties te " "gebruiken." #: Mailman/Gui/NonDigest.py:149 msgid "Sibling lists" msgstr "Verwante lijsten" #: Mailman/Gui/NonDigest.py:152 msgid "" "Other mailing lists on this site whose members are\n" " excluded from the regular (non-digest) delivery if those\n" " list addresses appear in a To: or Cc: header." msgstr "" "Andere maillijsten op deze site waarvan de leden zullen worden uitgesloten\n" " van reguliere mail als deze lijstadressen opgenomen\n" " zijn in een To: of Cc: header." #: Mailman/Gui/NonDigest.py:155 msgid "" "The list addresses should be written in full mail address\n" " format (e.g. mailman@example.com). Do not specify this list\n" " address mutually in the exclude list configuration page of the\n" " other list, or members of both lists won't get any message.\n" " Note also that the site administrator may prohibit cross " "domain\n" " siblings." msgstr "" "De lijstadressen moeten vermeld worden middels het volledige\n" " mailadres (b.v. mailman@example.com). Zorg ervoor dat het " "adres\n" " van deze lijst niet tegelijkertijd opgenomen is als verwante " "lijst in de\n" " instellingen van de andere lijst, want leden die lid zijn van " "beide\n" " lijsten zullen hierdoor geen enkel bericht ontvangen.\n" " Let op dat de systeembeheerder kan verbieden dat lijsten op " "andere\n" " domeinen kunnen worden opgenomen als verwante lijst." #: Mailman/Gui/NonDigest.py:163 msgid "" "Other mailing lists on this site whose members are\n" " included in the regular (non-digest) delivery if those\n" " list addresses don't appear in a To: or Cc: header." msgstr "" "Andere maillijsten op deze site waarvan de leden de reguliere mail\n" " zullen ontvangen als deze lijstadressen niet\n" " opgenomen zijn in een To: of Cc: header." #: Mailman/Gui/NonDigest.py:166 msgid "" "The list addresses should be written in full mail address\n" " format (e.g. mailman@example.com). Note also that the site\n" " administrator may prohibit cross domain siblings." msgstr "" "De lijstadressen moeten vermeld worden middels het volledige\n" " mailadres (b.v. mailman@example.com). Let op: de\n" " systeembeheerder kan verbieden dat lijsten op andere\n" " domeinen kunnen worden opgenomen als verwante lijst." #: Mailman/Gui/Passwords.py:27 msgid "Passwords" msgstr "Wachtwoorden" #: Mailman/Gui/Privacy.py:37 msgid "Privacy options..." msgstr "Openbaarheid/moderatie/misbruik" #: Mailman/Gui/Privacy.py:41 msgid "Subscription rules" msgstr "Lidmaatschap en ledenlijst" #: Mailman/Gui/Privacy.py:42 msgid "Sender filters" msgstr "Moderatie en afzenderfilters" #: Mailman/Gui/Privacy.py:43 msgid "Recipient filters" msgstr "Ontvangerfilters" #: Mailman/Gui/Privacy.py:44 msgid "Spam filters" msgstr "Spamfilters" #: Mailman/Gui/Privacy.py:58 Mailman/Gui/Usenet.py:63 msgid "None" msgstr "Geen" #: Mailman/Gui/Privacy.py:59 Mailman/Gui/Privacy.py:82 msgid "Confirm" msgstr "Bevestiging" #: Mailman/Gui/Privacy.py:60 Mailman/Gui/Privacy.py:83 msgid "Require approval" msgstr "Goedkeuring vereist" #: Mailman/Gui/Privacy.py:61 Mailman/Gui/Privacy.py:84 msgid "Confirm and approve" msgstr "Bevestiging en goedkeuring" #: Mailman/Gui/Privacy.py:63 Mailman/Gui/Privacy.py:86 msgid "What steps are required for subscription?
    " msgstr "Welke stappen zijn vereist voor een aanmelding?
    " #: Mailman/Gui/Privacy.py:64 msgid "" "None - no verification steps (Not\n" " Recommended )
    \n" " Confirm (*) - email confirmation step required " "
    \n" " Require approval - require list administrator\n" " Approval for subscriptions
    \n" " Confirm and approve - both confirm and approve\n" " \n" "

    (*) when someone requests a subscription,\n" " Mailman sends them a notice with a unique\n" " subscription request number that they must reply " "to\n" " in order to subscribe.
    \n" "\n" " This prevents mischievous (or malicious) people\n" " from creating subscriptions for others without\n" " their consent." msgstr "" "Geen - geen verificatie stappen (Niet\n" " aanbevolen)
    \n" " Bevestiging (*) - bevestigingsstap per e-mail\n" " vereist
    \n" " Goedkeuring vereist - vereist goedkeuring door\n" " de lijstbeheerder
    \n" " Bevestiging en goedkeuring - zowel goedkeuring\n" " als bevestiging zijn vereist\n" "

    (*) Als iemand een aanmeldingsverzoek " "indient,\n" " zal Mailman die persoon een bericht sturen met\n" " een uniek aanmeldingsverzoeknummer, welke\n" " beantwoord moet worden om zich aan te melden." "
    \n" "\n" " Dit voorkomt misbruik door derden, die zich voor\n" " zouden kunnen doen als de persoon in kwestie\n" " en valse aanmeldingen zouden kunnen indienen." #: Mailman/Gui/Privacy.py:87 msgid "" "Confirm (*) - email confirmation required
    \n" " Require approval - require list administrator\n" " approval for subscriptions
    \n" " Confirm and approve - both confirm and approve\n" " \n" "

    (*) when someone requests a subscription,\n" " Mailman sends them a notice with a unique\n" " subscription request number that they must reply " "to\n" " in order to subscribe.
    This prevents\n" " mischievous (or malicious) people from creating\n" " subscriptions for others without their consent." msgstr "" "Bevestiging (*) - er is een bevestigingsstap per e-mail vereist
    \n" " Goekeuring vereist - aanmelding vereist\n" " goedkeuring door de lijstbeheerder
    \n" " Bevestiging en goedkeuring - zowel bevestiging\n" " als goedkeuring vereist\n" " \n" "

    (*) Als iemand een aanmeldingsverzoek " "indient,\n" " zal Mailman die persoon een bericht sturen met\n" " een uniek aanmeldingsverzoeknummer, welke\n" " beantwoord moet worden om zich aan te melden." "
    \n" " Dit voorkomt misbruik door derden, die zich voor\n" " zouden kunnen doen als de persoon in kwestie\n" " en valse aanmeldingen zouden kunnen indienen." #: Mailman/Gui/Privacy.py:103 msgid "" "This section allows you to configure subscription and\n" " membership exposure policy. You can also control whether this\n" " list is public or not. See also the\n" " Archival Options section for\n" " separate archive-related privacy settings." msgstr "" "In deze sectie kunt u uw beleid instellen t.a.v. de\n" " aanname van nieuwe leden en de openbaarheid van uw\n" " ledenlijst. Tevens kunt u aangeven of de lijst een 'publieke\n" " lijst' is (i.e. of het bestaan van de lijst in de openbaarheid\n" " mag worden gebracht). Zie ook de sectie\n" " Archiefinstellingen voor\n" " de privacy-instellingen van uw archief." #: Mailman/Gui/Privacy.py:109 msgid "Subscribing" msgstr "Aanmelding" #: Mailman/Gui/Privacy.py:111 msgid "" "Advertise this list when people ask what lists are on this\n" " machine?" msgstr "" "Annonceer deze lijst wanneer men vraagt welke lijsten\n" " beschikbaar zijn?" #: Mailman/Gui/Privacy.py:117 msgid "" "Is the list moderator's approval required for unsubscription\n" " requests? (No is recommended)" msgstr "" "Is goedkeuring van de lijstmoderator vereist voor\n" " afmeldingsverzoeken? (Nee wordt aanbevolen)" #: Mailman/Gui/Privacy.py:120 msgid "" "When members want to leave a list, they will make an\n" " unsubscription request, either via the web or via email.\n" " Normally it is best for you to allow open unsubscriptions so " "that\n" " users can easily remove themselves from mailing lists (they " "get\n" " really upset if they can't get off lists!).\n" "\n" "

    For some lists though, you may want to impose moderator\n" " approval before an unsubscription request is processed. " "Examples\n" " of such lists include a corporate mailing list that all " "employees\n" " are required to be members of." msgstr "" "Als leden een lijst willen verlaten, zullen zij een\n" " afmeldingsverzoek indienen, via het web of via e-mail.\n" " Normaal gesproken kunt u beter toelaten dat gebruikers\n" " zichzelf op een gemakkelijke manier kunnen afmelden van\n" " maillijsten (ze kunnen zeer overstuur raken ze er niet\n" " af kunnen komen!).\n" "\n" "

    Voor sommige lijsten echter zou het kunnen dat u\n" " goedkeuring door de moderator wilt instellen. Een\n" " voorbeeld van dergelijke lijsten zijn maillijsten van\n" " bedrijven waar alle werknemers lid van moeten zijn." #: Mailman/Gui/Privacy.py:131 msgid "Ban list" msgstr "Zwarte lijst" #: Mailman/Gui/Privacy.py:133 msgid "" "List of addresses which are banned from membership in this\n" " mailing list." msgstr "" "Lijst van adressen die u wilt verbieden om lid te zijn van\n" " deze maillijst." #: Mailman/Gui/Privacy.py:136 msgid "" "Addresses in this list are banned outright from subscribing\n" " to this mailing list, with no further moderation required. " "Add\n" " addresses one per line; start the line with a ^ character to\n" " designate a regular expression match." msgstr "" "Adressen in deze lijst worden nadrukkelijk geweerd van aanmelding\n" " bij deze maillijst, zonder dat nadere moderatie noodzakelijk\n" " is. Voeg per regel ��n adres toe; start de regel met een ^\n" " teken om er de juiste reguliere uitdrukking van te maken." #: Mailman/Gui/Privacy.py:141 msgid "Membership exposure" msgstr "Openbaarheid lidmaatschapsgegevens" #: Mailman/Gui/Privacy.py:143 msgid "Anyone" msgstr "Iedereen" #: Mailman/Gui/Privacy.py:143 msgid "List admin only" msgstr "Alleen de lijstbeheerder" #: Mailman/Gui/Privacy.py:143 msgid "List members" msgstr "Leden van de lijst" #: Mailman/Gui/Privacy.py:144 msgid "Who can view subscription list?" msgstr "Wie mag de ledenlijst inzien?" #: Mailman/Gui/Privacy.py:146 msgid "" "When set, the list of subscribers is protected by member or\n" " admin password authentication." msgstr "" "Als deze instelling op 'Leden van de lijst' of 'Alleen de\n" " lijstbeheerder' is gezet, dan zal toegang tot de\n" " ledenlijst worden afgeschermd m.b.v. de\n" " wachtwoorden van de leden of de beheerder." #: Mailman/Gui/Privacy.py:150 msgid "" "Show member addresses so they're not directly recognizable\n" " as email addresses?" msgstr "" "Toon de adressen van de leden op een manier dat ze niet\n" " direct herkenbaar zijn als e-mailadressen?" #: Mailman/Gui/Privacy.py:152 msgid "" "Setting this option causes member email addresses to be\n" " transformed when they are presented on list web pages (both in\n" " text and as links), so they're not trivially recognizable as\n" " email addresses. The intention is to prevent the addresses\n" " from being snarfed up by automated web scanners for use by\n" " spammers." msgstr "" "Activering van deze optie zorgt ervoor dat de e-mailadressen vervormd\n" " worden afgebeeld op de webpagina's van de lijst (zowel in\n" " tekst als qua link), zodat ze niet herkenbaar zijn als\n" " gangbare e-mailadresen. Bedoeling is te voorkomen dat\n" " de adressen door automatische webscanners worden 'geoogst'\n" " t.b.v. spammers." #: Mailman/Gui/Privacy.py:162 msgid "" "When a message is posted to the list, a series of\n" " moderation steps are take to decide whether the a moderator " "must\n" " first approve the message or not. This section contains the\n" " controls for moderation of both member and non-member postings.\n" "\n" "

    Member postings are held for moderation if their\n" " moderation flag is turned on. You can control whether\n" " member postings are moderated by default or not.\n" "\n" "

    Non-member postings can be automatically\n" " accepted,\n" " held " "for\n" " moderation,\n" " rejected (bounced), or\n" " discarded,\n" " either individually or as a group. Any\n" " posting from a non-member who is not explicitly accepted,\n" " rejected, or discarded, will have their posting filtered by the\n" " general\n" " non-member rules.\n" "\n" "

    In the text boxes below, add one address per line; start the\n" " line with a ^ character to designate a Python regular expression. When entering backslashes, do " "so\n" " as if you were using Python raw strings (i.e. you generally " "just\n" " use a single backslash).\n" "\n" "

    Note that non-regexp matches are always done first." msgstr "" "Als een bericht naar de lijst wordt gestuurd, wordt\n" " een aantal moderatiestappen ondernomen om uit te maken of\n" " het bericht eerst door een moderator goedgekeurd moet worden\n" " of niet. Deze sectie omvat de moderatie-instellingen voor\n" " berichten van zowel leden als niet-leden.\n" "\n" "

    Berichten van leden worden vastgehouden voor moderatie als\n" " hun moderatie-instelling is geactiveerd. U kunt\n" " een standaard instelling defini�ren voor het wel of niet laten\n" " modereren van berichten van de leden.\n" "\n" "

    Berichten van niet-leden kunnen automatisch worden\n" " geaccepteerd,\n" " \n" " vastgehouden voor moderatie,\n" " geweigerd (gebounced), of\n" " genegeerd,\n" " per individueel adres of als groep. Berichten van niet-leden\n" " die niet expliciet zijn geaccepteerd, geweigerd of genegeerd,\n" " zullen worden gefilterd volgens de\n" " \n" " algemene regels voor niet-leden.\n" "\n" "

    In de onderstaande tekstvelden dient u per regel ��n adres\n" " in te vullen. Start de regel met een ^ teken om er de juiste\n" " reguliere Python uitdrukking van te maken. Bij gebruik\n" " van 'backslashes' (schuine strepen) kunt u deze invoeren alsof\n" " het Python raw strings zijn (m.a.w. in het algemeen gebruikt\n" " u slechts ��n backslash).\n" "\n" "

    Ter aanvullende informatie: de filters voor individuele\n" " adressen worden als eerste toegepast." #: Mailman/Gui/Privacy.py:195 msgid "Member filters" msgstr "Filters voor leden" #: Mailman/Gui/Privacy.py:198 msgid "By default, should new list member postings be moderated?" msgstr "" "Moeten, als standaardinstelling, berichten van nieuwe leden\n" " worden gemodereerd?" #: Mailman/Gui/Privacy.py:200 msgid "" "Each list member has a moderation flag which says\n" " whether messages from the list member can be posted directly " "to\n" " the list, or must first be approved by the list moderator. " "When\n" " the moderation flag is turned on, list member postings must be\n" " approved first. You, the list administrator can decide whether " "a\n" " specific individual's postings will be moderated or not.\n" "\n" "

    When a new member is subscribed, their initial moderation " "flag\n" " takes its value from this option. Turn this option off to " "accept\n" " member postings by default. Turn this option on to, by " "default,\n" " moderate member postings first. You can always manually set " "an\n" " individual member's moderation bit by using the\n" " membership management\n" " screens." msgstr "" "Elk lid heeft een moderatie-instelling die bepaalt\n" " of berichten van het lid direct naar de lijst kunnen\n" " worden doorgestuurd, of eerst goedgekeurd moeten worden door\n" " de lijstmoderator. Als moderatie is geactiveerd, moeten\n" " de berichten eerst worden goedgekeurd. U kunt als\n" " lijstbeheerder beslissen of berichten van een specifiek lid\n" " moet worden gemodereerd of niet.\n" "\n" "

    Als een nieuw lid wordt aangemeld, zal bij aanvang de\n" " moderatie-instelling worden overgenomen van hetgeen u hier\n" " definieert. Zet deze optie op Nee om berichten van\n" " leden standaard te accepteren. Zet deze optie op Ja\n" " om berichten van leden eerst te laten modereren. Altijd kunt\n" " u de moderatie-instelling van elk individueel lid handmatig\n" " wijzigen in de Ledenlijst." #: Mailman/Gui/Privacy.py:217 msgid "" "Action to take when a moderated member posts to the\n" " list." msgstr "" "Te ondernemen actie als een gemodereerd lid\n" " een bericht naar de lijst stuurt." #: Mailman/Gui/Privacy.py:219 msgid "" "

    • Hold -- this holds the message for approval\n" " by the list moderators.\n" "\n" "

    • Reject -- this automatically rejects the message " "by\n" " sending a bounce notice to the post's author. The text of the\n" " bounce notice can be configured by you.\n" "\n" "

    • Discard -- this simply discards the message, " "with\n" " no notice sent to the post's author.\n" "
    " msgstr "" "
    • Vasthouden -- dit houdt het bericht vast voor\n" " goedkeuring door de lijstmoderators.\n" "\n" "

    • Weigeren -- dit weigert het bericht automatisch\n" " en genereert een weigeringsmelding naar de afzender. De tekst\n" " van de weigeringsmelding kunt u zelf instellen.\n" "\n" "

    • Negeren -- dit negeert het bericht volkomen,\n" " zonder enige melding naar de afzender.\n" "
    " #: Mailman/Gui/Privacy.py:233 msgid "" "Text to include in any\n" " rejection notice to\n" " be sent to moderated members who post to this list." msgstr "" "Tekst op te nemen in elke\n" " weigeringsmelding\n" " naar gemodereerde leden als deze berichten naar de lijst sturen." #: Mailman/Gui/Privacy.py:238 msgid "Non-member filters" msgstr "Filters voor niet-leden" #: Mailman/Gui/Privacy.py:241 msgid "" "List of non-member addresses whose postings should be\n" " automatically accepted." msgstr "" "Lijst van adressen van niet-leden van wie berichten\n" " automatisch moeten worden geaccepteerd." #: Mailman/Gui/Privacy.py:248 msgid "" "Postings from any of these non-members will be automatically\n" " accepted with no further moderation applied. Add member\n" " addresses one per line; start the line with a ^ character to\n" " designate a regular expression match. A line consisting of\n" " the @ character followed by a list name specifies another\n" " Mailman list in this installation, all of whose member\n" " addresses will be accepted for this list." msgstr "" "Berichten van deze niet-leden worden automatisch\n" " geaccepteerd zonder verdere moderatie. Voeg per regel één\n" " adres toe; start de regel met een ^ teken om er de juiste\n" " reguliere uitdrukking van te maken. Een regel bestaand uit\n" " het @ teken gevolgd door een lijstnaam duidt naar een andere\n" " lijst in deze Mailman install, waarvan alle leden geaccepteerd\n" " zullen worden voor deze lijst." #: Mailman/Gui/Privacy.py:257 msgid "" "List of non-member addresses whose postings will be\n" " immediately held for moderation." msgstr "" "Lijst van adressen van niet-leden van wie berichten\n" " onmiddellijk moeten worden vastgehouden voor moderatie." #: Mailman/Gui/Privacy.py:260 msgid "" "Postings from any of these non-members will be immediately\n" " and automatically held for moderation by the list moderators.\n" " The sender will receive a notification message which will " "allow\n" " them to cancel their held message. Add member addresses one " "per\n" " line; start the line with a ^ character to designate a regular\n" " expression match." msgstr "" "Berichten van deze niet-leden zullen onmiddellijk\n" " en automatisch worden vastgehouden voor moderatie door de\n" " lijstmoderators. De afzenders zullen een melding ontvangen die\n" " hen in staat stelt hun vastgehouden bericht te annuleren. Voeg\n" " per regel ��n adres toe; start de regel met een ^ teken om er\n" " de juiste reguliere uitdrukking van te maken." #: Mailman/Gui/Privacy.py:268 msgid "" "List of non-member addresses whose postings will be\n" " automatically rejected." msgstr "" "Lijst van adressen van niet-leden van wie berichten\n" " automatisch moeten worden geweigerd." #: Mailman/Gui/Privacy.py:271 msgid "" "Postings from any of these non-members will be automatically\n" " rejected. In other words, their messages will be bounced back " "to\n" " the sender with a notification of automatic rejection. This\n" " option is not appropriate for known spam senders; their " "messages\n" " should be\n" " automatically discarded.\n" "\n" "

    Add member addresses one per line; start the line with a ^\n" " character to designate a regular expression match." msgstr "" "Berichten van deze niet-leden zullen automatisch worden\n" " geweigerd. M.a.w.: de berichten worden teruggezonden naar de\n" " afzender met een melding van de automatische weigering. Deze\n" " optie is niet geschikt voor bekende verzenders van spam; hun\n" " berichten moeten\n" " automatisch worden genegeerd..\n" "\n" "

    Voeg per regel ��n adres toe; start de regel met een ^\n" " teken om er de juiste reguliere uitdrukking van te maken." #: Mailman/Gui/Privacy.py:283 msgid "" "List of non-member addresses whose postings will be\n" " automatically discarded." msgstr "" "Lijst van adressen van niet-leden van wie berichten\n" " automatisch moeten worden genegeerd." #: Mailman/Gui/Privacy.py:286 msgid "" "Postings from any of these non-members will be automatically\n" " discarded. That is, the message will be thrown away with no\n" " further processing or notification. The sender will not " "receive\n" " a notification or a bounce, however the list moderators can\n" " optionally receive copies of auto-discarded messages..\n" "\n" "

    Add member addresses one per line; start the line with a ^\n" " character to designate a regular expression match." msgstr "" "Berichten van deze niet-leden zullen automatisch worden\n" " genegeerd. Dat houdt in dat het bericht wordt weggegooid\n" " zonder verdere verwerking of meldingen. De afzender ontvangt\n" " geen melding noch een bouncebericht, hoewel de lijstmoderators\n" " indien gewenst kopie�n kunnen ontvangen van automatisch genegeerde berichten." ".\n" "\n" "

    Voeg per regel ��n adres toe; start de regel met een ^\n" " teken om er de juiste reguliere uitdrukking van te maken." #: Mailman/Gui/Privacy.py:298 msgid "" "Action to take for postings from non-members for which no\n" " explicit action is defined." msgstr "" "Te ondernemen actie voor berichten van niet-leden waarvoor\n" " geen expliciete actie is gedefinieerd." #: Mailman/Gui/Privacy.py:301 msgid "" "When a post from a non-member is received, the message's\n" " sender is matched against the list of explicitly\n" " accepted,\n" " held,\n" " rejected (bounced), and\n" " discarded addresses. If no match is found, then this " "action\n" " is taken." msgstr "" "Als een bericht van een niet-lid is ontvangen, wordt de afzender\n" " van het bericht vergeleken met de lijst van expliciet\n" " geaccepteerde,\n" " vastgehouden,\n" " geweigerde en\n" " genegeerde adressen. Als de afzender niet in deze\n" " lijsten wordt aangetroffen, zal de hier gedefinieerde actie\n" " worden uitgevoerd." #: Mailman/Gui/Privacy.py:313 msgid "" "Should messages from non-members, which are automatically\n" " discarded, be forwarded to the list moderator?" msgstr "" "Moeten berichten van niet-leden die automatisch zijn genegeerd\n" " worden doorgestuurd naar de lijstmoderator?" #: Mailman/Gui/Privacy.py:317 msgid "" "Text to include in any rejection notice to be sent to\n" " non-members who post to this list. This notice can include\n" " the list's owner address by %%(listowner)s and replaces the\n" " internally crafted default message." msgstr "" "Tekst op te nemen in elke weigeringsmelding naar\n" " niet-leden als deze berichten naar de lijst sturen. In deze\n" " tekst kan het adres van de lijsteigenaar opgenomen\n" " worden met de notatie %%(listowner)s en deze tekst zal\n" " de standaardtekst van de weigeringsmelding vervangen." #: Mailman/Gui/Privacy.py:325 msgid "" "This section allows you to configure various filters based on\n" " the recipient of the message." msgstr "" "In deze sectie kunt u diverse filters instellen m.b.t. de ontvangers\n" " van het bericht (geadresseerden)." #: Mailman/Gui/Privacy.py:328 msgid "Recipient filters" msgstr "Ontvangerfilters" #: Mailman/Gui/Privacy.py:332 msgid "" "Must posts have list named in destination (to, cc) field\n" " (or be among the acceptable alias names, specified below)?" msgstr "" "Moet de naam van de lijst opgenomen zijn in de To: of Cc:\n" " bestemmingsvelden (of aanwezig zijn in de hieronder\n" " gespecificeerde lijst van geaccepteerde aliasnamen)?" #: Mailman/Gui/Privacy.py:335 msgid "" "Many (in fact, most) spams do not explicitly name their\n" " myriad destinations in the explicit destination addresses - in\n" " fact often the To: field has a totally bogus address for\n" " obfuscation. The constraint applies only to the stuff in the\n" " address before the '@' sign, but still catches all such spams.\n" "\n" "

    The cost is that the list will not accept unhindered any\n" " postings relayed from other addresses, unless\n" "\n" "

      \n" "
    1. The relaying address has the same name, or\n" "\n" "
    2. The relaying address name is included on the options " "that\n" " specifies acceptable aliases for the list.\n" "\n" "
    " msgstr "" "Veel (in feite de meeste) spamberichten vermelden niet expliciet\n" " hun ontelbare bestemmingen als bestemmingsadres - vaak is\n" " het in het To: veld vermelde adres zelfs volledig nep. De\n" " beperking geldt alleen voor het gedeelte voor het '@' teken,\n" " maar zal voldoende werken.\n" "\n" "

    Het nadeel is dat de lijst niet ongehinderd berichten\n" " accepteert die zijn gerelayed vanaf andere adressen, tenzij\n" "\n" "

      \n" "
    1. Het relay-adres dezelfde naam heeft, of\n" "\n" "
    2. De naam van het relay-adres is opgenomen in de\n" " optie m.b.t. geaccepteerde aliasnamen voor de lijst.\n" "\n" "
    " #: Mailman/Gui/Privacy.py:353 msgid "" "Alias names (regexps) which qualify as explicit to or cc\n" " destination names for this list." msgstr "" "Aliasnamen die voldoen als expliciete To: of Cc:\n" " bestemmingsnaam voor deze lijst." #: Mailman/Gui/Privacy.py:356 msgid "" "Alternate addresses that are acceptable when\n" " `require_explicit_destination' is enabled. This option takes " "a\n" " list of regular expressions, one per line, which is matched\n" " against every recipient address in the message. The matching " "is\n" " performed with Python's re.match() function, meaning they are\n" " anchored to the start of the string.\n" " \n" "

    For backwards compatibility with Mailman 1.1, if the regexp\n" " does not contain an `@', then the pattern is matched against " "just\n" " the local part of the recipient address. If that match fails, " "or\n" " if the pattern does contain an `@', then the pattern is " "matched\n" " against the entire recipient address.\n" " \n" "

    Matching against the local part is deprecated; in a future\n" " release, the pattern will always be matched against the entire\n" " recipient address." msgstr "" "Alternatieve adressen die worden geaccepteerd wanneer\n" " `require_explicit_destination' is geactiveerd. Deze optie\n" " vergelijkt een lijst van reguliere uitdrukkingen, ��n per " "regel,\n" " met elke ontvangstadres dat in het bericht vermeld staat. Dit\n" " gebeurt m.b.v. de functie re.match() van Python, wat inhoudt " "dat\n" " ze worden verankerd in het begin van de string.\n" " \n" "

    Vanwege compatibiliteit met de eerdere versie 1.1 van " "Mailman\n" " zal, als de reguliere uitdrukking geen `@'-teken bevat, het\n" " patroon worden vergeleken met het lokale deel van het\n" " ontvangstadres. Als er geen match is, of als het patroon een\n" " `@' bevat, dan wordt het patroon vergeleken met het volledige\n" " ontvangstadres.\n" " \n" "

    Het vergelijken met het lokale deel heeft inmiddels de " "status\n" " 'deprecated' (verouderd/niet geldig) gekregen; in toekomstige\n" " versies van Mailman zal het patroon altijd met het volledige\n" " adres worden vergeleken." #: Mailman/Gui/Privacy.py:374 msgid "Ceiling on acceptable number of recipients for a posting." msgstr "" "Het maximum aantal ontvangers dat geaccepteerd kan worden voor een bericht." #: Mailman/Gui/Privacy.py:376 msgid "" "If a posting has this number, or more, of recipients, it is\n" " held for admin approval. Use 0 for no ceiling." msgstr "" "Als een bericht dit aantal of meer ontvangers heeft, zal\n" " het bericht worden vastgehouden voor goedkeuring door\n" " de beheerder. Gebruik 0 om geen limiet in te stellen." #: Mailman/Gui/Privacy.py:381 msgid "" "This section allows you to configure various anti-spam\n" " filters posting filters, which can help reduce the amount of " "spam\n" " your list members end up receiving.\n" " " msgstr "" "In deze sectie kunt u diverse anti-spam filters instellen,\n" " die kunnen helpen om de hoeveelheid spam die u leden krijgen\n" " te verminderen.\n" " " #: Mailman/Gui/Privacy.py:386 msgid "Header filters" msgstr "Header-filters" #: Mailman/Gui/Privacy.py:389 msgid "Filter rules to match against the headers of a message." msgstr "Filterregels toe te passen op de headers van een bericht." #: Mailman/Gui/Privacy.py:391 msgid "" "Each header filter rule has two parts, a list of regular\n" " expressions, one per line, and an action to take. Mailman\n" " matches the message's headers against every regular expression " "in\n" " the rule and if any match, the message is rejected, held, or\n" " discarded based on the action you specify. Use Defer " "to\n" " temporarily disable a rule.\n" "\n" " You can have more than one filter rule for your list. In that\n" " case, each rule is matched in turn, with processing stopped " "after\n" " the first match.\n" "\n" " Note that headers are collected from all the attachments \n" " (except for the mailman administrivia message) and\n" " matched against the regular expressions. With this feature,\n" " you can effectively sort out messages with dangerous file\n" " types or file name extensions." msgstr "" "Elke header-filter bestaat uit twee delen: een lijst van reguliere\n" " uitdrukkingen, ��n per regel, en een actie die ondrnomen moet\n" " worden als de uitdrukking in de headers van het bericht wordt\n" " aangetroffen. Mogelijke acties: geweigerd, vastgehouden of\n" " genegeerd. Gebruik Uitstellen om een\n" " filterregel tijdelijk buiten werking te stellen.\n" "\n" " U kunt meerdere filterregels instellen, die in volgorde\n" " worden doorlopen. Bij de eerste 'match' wordt de\n" " corresponderende actie ondernomen.\n" "\n" " Let op dat ook de headers van alle bijvoegsels worden\n" " gecheckt! Met deze eigenschap kunt u effectief berichten\n" " met gevaarlijke bestandstypen of bestandsextensies er uit\n" " selecteren." #: Mailman/Gui/Privacy.py:408 msgid "Legacy anti-spam filters" msgstr "Anti-spamfilters van oudere Mailman versies (optioneel)" #: Mailman/Gui/Privacy.py:411 msgid "Hold posts with header value matching a specified regexp." msgstr "" "Houd berichten vast met een headerwaarde die overeenkomt met een\n" " gespecificeerde reguliere uitdrukking." #: Mailman/Gui/Privacy.py:412 msgid "" "Use this option to prohibit posts according to specific\n" " header values. The target value is a regular-expression for\n" " matching against the specified header. The match is done\n" " disregarding letter case. Lines beginning with '#' are " "ignored\n" " as comments.\n" "\n" "

    For example:

    to: .*@public.com
    says to hold all\n" " postings with a To: mail header containing '@public." "com'\n" " anywhere among the addresses.\n" "\n" "

    Note that leading whitespace is trimmed from the regexp. " "This\n" " can be circumvented in a number of ways, e.g. by escaping or\n" " bracketing it." msgstr "" "Gebruik deze instelling om berichten tegen te houden met specifieke\n" " headerwaardes. De doelwaarde is een reguliere uitdrukking\n" " die vergeleken zal worden met de gespecificeerde header.\n" " Bij de vergelijking wordt geen onderscheid gemaakt tussen\n" " hoofdletters en kleine letters. Letterregels die beginnen\n" " met '#' worden genegeerd en beschouwd als opmerkingen.\n" "\n" "

    Bijvoorbeeld:

    to: .*@public.com
    betekent dat\n" " alle berichten met een To: mailheader die\n" " '@public.com' bevat worden vastgehouden.\n" "\n" "

    Let er op dat spaties aan het begin van de reguliere\n" " uitdrukking worden weggehaald. Dit kan worden omzeild op\n" " een aantal manieren, o.a. door 'escaping' of door het tussen\n" " haakjes te plaatsen." #: Mailman/Gui/Privacy.py:492 msgid "" "Header filter rules require a pattern.\n" " Incomplete filter rules will be ignored." msgstr "" "Header-filterregels vereisen een patroon.\n" " Incomplete filterregels worden genegeerd." #: Mailman/Gui/Privacy.py:500 msgid "" "The header filter rule pattern\n" " '%(safepattern)s' is not a legal regular expression. This\n" " rule will be ignored." msgstr "" "Het header-filterpatroon\n" " '%(safepattern)s' is geen toegestane reguliere uitdrukking.\n" " Deze regel zal worden genegeerd." #: Mailman/Gui/Topics.py:36 msgid "Topics" msgstr "Onderwerpen en onderwerpfilter" #: Mailman/Gui/Topics.py:44 msgid "List topic keywords" msgstr "Sleutelwoorden voor lijstonderwerpen" #: Mailman/Gui/Topics.py:46 msgid "Disabled" msgstr "Uit" #: Mailman/Gui/Topics.py:46 msgid "Enabled" msgstr "Aan" #: Mailman/Gui/Topics.py:47 msgid "Should the topic filter be enabled or disabled?" msgstr "Moet de onderwerpfilter aan of uit staan?" #: Mailman/Gui/Topics.py:49 msgid "" "The topic filter categorizes each incoming email message\n" " according to regular\n" " expression filters you specify below. If the message's\n" " Subject: or Keywords: header contains " "a\n" " match against a topic filter, the message is logically placed\n" " into a topic bucket. Each user can then choose to " "only\n" " receive messages from the mailing list for a particular topic\n" " bucket (or buckets). Any message not categorized in a topic\n" " bucket registered with the user is not delivered to the list.\n" "\n" "

    Note that this feature only works with regular delivery, " "not\n" " digest delivery.\n" "\n" "

    The body of the message can also be optionally scanned for\n" " Subject: and Keywords: headers, as\n" " specified by the topics_bodylines_limit\n" " configuration variable." msgstr "" "De onderwerpfilter categoriseert elk binnengekomen e-mailbericht\n" " volgens de reguliere\n" " uitdrukkingsfilters die u hieronder specificeert. Als de\n" " Subject: (onderwerp) of Keywords:\n" " (sleutelwoorden) headers van het bericht overeenkomen met\n" " een onderwerpfilter, zal het bericht in een speciaal\n" " onderwerpbakje worden geplaatst. Elke gebruiker\n" " kan vervolgens kiezen om alleen berichten van de maillijst\n" " te ontvangen uit ��n of meerdere onderwerpbakjes. Elk\n" " bericht dat niet is gecategoriseerd in de door de gebruiker\n" " geregistreerde onderwerpbakjes zal niet worden afgeleverd.\n" "

    Let op: deze mogelijkheid bestaat alleen bij ontvangst\n" " van reguliere mail, en werkt niet bij verzamelmail.\n" "\n" "

    De bodytekst van het bericht kan eventueel ook worden\n" " gecontroleerd op de aanwezigheid van Subject:\n" " en Keywords: headers; dit is nader toegelicht\n" " bij de topics_bodylines_limit instelling." #: Mailman/Gui/Topics.py:70 msgid "How many body lines should the topic matcher scan?" msgstr "" "Hoeveel regels van de bodytekst moet de onderwerpvergelijker controleren?" #: Mailman/Gui/Topics.py:72 msgid "" "The topic matcher will scan this many lines of the message\n" " body looking for topic keyword matches. Body scanning stops " "when\n" " either this many lines have been looked at, or a non-header-" "like\n" " body line is encountered. By setting this value to zero, no " "body\n" " lines will be scanned (i.e. only the Keywords: " "and\n" " Subject: headers will be scanned). By setting " "this\n" " value to a negative number, then all body lines will be " "scanned\n" " until a non-header-like line is encountered.\n" " " msgstr "" "De onderwerpvergelijker zal het aangegeven aantal regels van de\n" " bodytekst van het bericht controleren op de aanwezigheid\n" " onderwerpsleutelwoorden. De controle stopt wanneer het\n" " aangegeven aantal regels is bekeken, of zodra een niet\n" " op een header lijkende bodytekstregel wordt aangetroffen.\n" " Door deze waarde op 0 te zetten, zullen geen\n" " bodytekstregels worden onderzocht (m.a.w.: alleen de\n" " Keywords: en Subject: headers\n" " zullen worden gecontroleerd). Door deze waarde op een\n" " negatief getal te zetten, zullen alle bodytekstregels\n" " worden gecontroleerd totdat een niet op een header\n" " lijkende regel wordt aangetroffen.\n" " " #: Mailman/Gui/Topics.py:83 msgid "Topic keywords, one per line, to match against each message." msgstr "" "Sleutelwoorden voor onderwerpen, ��n per regel, voor vergelijking met elk " "bericht." #: Mailman/Gui/Topics.py:85 msgid "" "Each topic keyword is actually a regular expression, which is\n" " matched against certain parts of a mail message, specifically " "the\n" " Keywords: and Subject: message " "headers.\n" " Note that the first few lines of the body of the message can " "also\n" " contain a Keywords: and Subject:\n" " \"header\" on which matching is also performed." msgstr "" "Elk sleutelwoord is eigenlijk een reguliere uitdrukking, die vergeleken\n" " wordt met bepaalde delen van een mailbericht, en wel met name\n" " de Keywords: en Subject: headers\n" " van een bericht. Let op dat ook de eerste regels van de\n" " bodytekst van het bericht Keywords: en\n" " Subject: headers kunnen bevatten, waarop controle\n" " kan worden verricht." #: Mailman/Gui/Topics.py:123 msgid "" "Topic specifications require both a name and\n" " a pattern. Incomplete topics will be ignored." msgstr "" "Onderwerp-specificaties vereisen zowel een naam als een\n" " patroon. Incomplete onderwerpen worden genegeerd." #: Mailman/Gui/Topics.py:132 msgid "" "The topic pattern '%(safepattern)s' is not a\n" " legal regular expression. It will be discarded." msgstr "" "Het onderwerp-patroon '%(safepattern)s' is geen geldige\n" " reguliere uitdrukking. Het wordt genegeerd." #: Mailman/Gui/Usenet.py:25 msgid "Mail<->News gateways" msgstr "Berichtuitwisseling met Nieuwsgroep" #: Mailman/Gui/Usenet.py:35 msgid "Mail-to-News and News-to-Mail gateway services." msgstr "" "Berichtuitwisseling Maillijst-naar-Nieuwsgroep en Nieuwsgroep-naar-Maillijst." #: Mailman/Gui/Usenet.py:37 msgid "News server settings" msgstr "Instellingen van de news server" #: Mailman/Gui/Usenet.py:40 msgid "The hostname of the machine your news server is running on." msgstr "De hostnaam van de machine waarop uw news server draait." #: Mailman/Gui/Usenet.py:41 msgid "" "This value may be either the name of your news server, or\n" " optionally of the format name:port, where port is a port " "number.\n" "\n" " The news server is not part of Mailman proper. You have to\n" " already have access to an NNTP server, and that NNTP server " "must\n" " recognize the machine this mailing list runs on as a machine\n" " capable of reading and posting news." msgstr "" "Deze waarde mag zowel de naam van uw news server zijn, of\n" " optioneel, het format name:port hebben, waarbij port een\n" " poortnummer is.\n" "\n" " De news server is geen onderdeel van Mailman. U moet al\n" " toegang hebben tot een NNTP server, en die NNTP server moet\n" " de machine waarop uw maillijst draait herkennen als een\n" " machine die nieuws kan lezen en verzenden." #: Mailman/Gui/Usenet.py:50 msgid "The name of the Usenet group to gateway to and/or from." msgstr "" "De naam van de Usenet groep waaraan en/of waarvan berichten\n" " moeten worden doorgegeven." #: Mailman/Gui/Usenet.py:53 msgid "" "Should new posts to the mailing list be sent to the\n" " newsgroup?" msgstr "" "Moeten nieuwe berichten aan de maillijst naar de\n" " nieuwsgroep worden verzonden?" #: Mailman/Gui/Usenet.py:57 msgid "" "Should new posts to the newsgroup be sent to the mailing\n" " list?" msgstr "" "Moeten nieuwe berichten aan de nieuwsgroep naar de\n" " maillijst worden verzonden?" #: Mailman/Gui/Usenet.py:60 msgid "Forwarding options" msgstr "Doorstuuropties" #: Mailman/Gui/Usenet.py:63 msgid "Moderated" msgstr "Gemodereerd" #: Mailman/Gui/Usenet.py:63 msgid "Open list, moderated group" msgstr "Open lijst, gemodereerde groep" #: Mailman/Gui/Usenet.py:66 msgid "The moderation policy of the newsgroup." msgstr "Het moderatiebeleid van de nieuwsgroep." #: Mailman/Gui/Usenet.py:68 msgid "" "This setting determines the moderation policy of the\n" " newsgroup and its interaction with the moderation policy of " "the\n" " mailing list. This only applies to the newsgroup that you are\n" " gatewaying to, so if you are only gatewaying from\n" " Usenet, or the newsgroup you are gatewaying to is not " "moderated,\n" " set this option to None.\n" "\n" "

    If the newsgroup is moderated, you can set this mailing " "list\n" " up to be the moderation address for the newsgroup. By " "selecting\n" " Moderated, an additional posting hold will be placed " "in\n" " the approval process. All messages posted to the mailing list\n" " will have to be approved before being sent on to the " "newsgroup,\n" " or to the mailing list membership.\n" "\n" "

    Note that if the message has an Approved " "header\n" " with the list's administrative password in it, this hold test\n" " will be bypassed, allowing privileged posters to send messages\n" " directly to the list and the newsgroup.\n" "\n" "

    Finally, if the newsgroup is moderated, but you want to " "have\n" " an open posting policy anyway, you should select Open " "list,\n" " moderated group. The effect of this is to use the normal\n" " Mailman moderation facilities, but to add an Approved\n" " header to all messages that are gatewayed to Usenet." msgstr "" "Deze instelling bepaalt het moderatiebeleid van de nieuwsgroep\n" " en de interactie met het moderatiebeleid van de maillijst.\n" " Dit heeft alleen betrekking op het doorsturen van berichten\n" " naar de betreffende nieuwsgroep, dus als slechts\n" " berichten van�f Usenet worden doorgegeven, of als de " "nieuwgroep\n" " niet gemodereerd, dan zet u deze instelling op Geen.\n" "\n" "

    Als de nieuwsgroep gemodereerd wordt, kunt u deze\n" " maillijst opzetten met het modereeradres van de nieuwsgroep.\n" " Door Gemodereerd te selecteren, zullen berichten een\n" " extra keer worden vastgehouden in het goedkeuringsproces.\n" " Alle berichten aan de maillijst zullen moeten worden\n" " goedgekeurd voordat ze worden doorgestuurd naar de nieuwsgroep\n" " of de leden van de maillijst.\n" "\n" "

    Als het bericht een Approved header heeft\n" " met daarin het lijstbeheerderswachtwoord, zal deze extra\n" " stap worden overgeslagen. Op deze manier kunt u berichten\n" " direct naar de lijst en de nieuwsgroep sturen.\n" "\n" "

    Tot slot, als de nieuwsgroep wordt gemodereerd en u toch\n" " een open verzendbeleid wilt hebben, kies dan voor Open " "lijst,\n" " gemodereerde groep. Het resultaat hiervan is dat de\n" " normale moderatievoorzieningen van Mailman worden gebruikt,\n" " maar ook dat een Approved header wordt toegevoegd\n" " aan alle berichten die naar Usenet worden doorgestuurd." #: Mailman/Gui/Usenet.py:94 msgid "Prefix Subject: headers on postings gated to news?" msgstr "" "Voorvoegsel toevoegen aan Subject: headers van berichten\n" "die worden doorgestuurd naar de nieuwsgroep?" #: Mailman/Gui/Usenet.py:95 msgid "" "Mailman prefixes Subject: headers with\n" " text you can\n" " customize and normally, this prefix shows up in messages\n" " gatewayed to Usenet. You can set this option to No " "to\n" " disable the prefix on gated messages. Of course, if you turn " "off\n" " normal Subject: prefixes, they won't be prefixed for\n" " gated messages either." msgstr "" "Mailman kan een aanpasbare\n" " tekst als voorvoegsel aan de Subject: headers\n" " toevoegen, en normaliter zal dit voorvoegsel te zien zijn in\n" " de berichten die naar Usenet worden doorgestuurd. U kunt\n" " deze optie op Nee zetten om dit uit te schakelen.\n" " Vanzelfsprekend zal, als u de reguliere Subject:\n" " voorvoegsels hebt uitgeschakeld, �berhaupt geen voorvoegsel\n" " aan doorgestuurde berichten worden toegevoegd." #: Mailman/Gui/Usenet.py:103 msgid "Mass catch up" msgstr "Synchroniseren van alle berichten" #: Mailman/Gui/Usenet.py:106 msgid "Should Mailman perform a catchup on the newsgroup?" msgstr "" "Moet Mailman een synchronisatie-actie op de\n" "nieuwsgroep uitvoeren?" #: Mailman/Gui/Usenet.py:107 msgid "" "When you tell Mailman to perform a catchup on the newsgroup,\n" " this means that you want to start gating messages to the " "mailing\n" " list with the next new message found. All earlier messages on\n" " the newsgroup will be ignored. This is as if you were reading\n" " the newsgroup yourself, and you marked all current messages as\n" " read. By catching up, your mailing list members will\n" " not see any of the earlier messages." msgstr "" "Als u Mailman opdracht geeft een synchronisatie-actie uit te\n" " voeren op de nieuwsgroep, worden vanaf het eerstvolgende\n" " bericht alle nieuwe berichten naar de maillijst doorgestuurd.\n" " Alle eerdere berichten in de nieuwsgroep worden genegeerd.\n" " Dit is alsof u zelf de nieuwsgroep leest en u alle huidige\n" " berichten had gemarkeerd als gelezen. Door de\n" " synchronisatie-actie zullen de leden van uw maillijstleden\n" " geen van de eerdere berichten zien." #: Mailman/Gui/Usenet.py:121 msgid "Mass catchup completed" msgstr "Synchronisatie-actie voltooid" #: Mailman/Gui/Usenet.py:133 msgid "" "You cannot enable gatewaying unless both the\n" " news server field " "and\n" " the linked\n" " newsgroup fields are filled in." msgstr "" "Om een gateway te activeren moet u zowel de\n" " news server als " "de\n" " nieuwsgroep/n defini�ren." #: Mailman/HTMLFormatter.py:48 msgid "%(listinfo_link)s list run by %(owner_link)s" msgstr "%(listinfo_link)s wordt beheerd door %(owner_link)s" #: Mailman/HTMLFormatter.py:56 msgid "%(realname)s administrative interface" msgstr "%(realname)s beheerdersinstellingen" #: Mailman/HTMLFormatter.py:57 msgid " (requires authorization)" msgstr " (alleen toegang met authorisatie)" #: Mailman/HTMLFormatter.py:60 msgid "Overview of all %(hostname)s mailing lists" msgstr "Overzicht van alle maillijsten op %(hostname)s" #: Mailman/HTMLFormatter.py:77 msgid "(1 private member not shown)" msgstr "(1 anoniem lid niet getoond)" #: Mailman/HTMLFormatter.py:79 msgid "(%(num_concealed)d private members not shown)" msgstr "(%(num_concealed)d anonieme leden niet getoond)" #: Mailman/HTMLFormatter.py:135 msgid "; it was disabled by you" msgstr "; het is door u uitgeschakeld" #: Mailman/HTMLFormatter.py:137 msgid "; it was disabled by the list administrator" msgstr "; het is uitgeschakeld door de lijstbeheerder" #: Mailman/HTMLFormatter.py:141 msgid "" "; it was disabled due to excessive bounces. The\n" " last bounce was received on %(date)s" msgstr "" "; het is uitgeschakeld vanwege een excessief aantal bounces. De\n" " laatste bounce werd ontvangen op %(date)s" #: Mailman/HTMLFormatter.py:144 msgid "; it was disabled for unknown reasons" msgstr "; het is uitgeschakeld om onbekende redenen" #: Mailman/HTMLFormatter.py:146 msgid "Note: your list delivery is currently disabled%(reason)s." msgstr "Opmerking: uw mailontvangst is momenteel uitgeschakeld%(reason)s." #: Mailman/HTMLFormatter.py:149 msgid "Mail delivery" msgstr "Mailontvangst" #: Mailman/HTMLFormatter.py:151 Mailman/HTMLFormatter.py:296 msgid "the list administrator" msgstr "de lijstbeheerder" #: Mailman/HTMLFormatter.py:152 msgid "" "

    %(note)s\n" "\n" "

    You may have disabled list delivery intentionally,\n" " or it may have been triggered by bounces from your email\n" " address. In either case, to re-enable delivery, change the\n" " %(link)s option below. Contact %(mailto)s if you have any\n" " questions or need assistance." msgstr "" "

    %(note)s\n" "\n" "

    U heeft de ontvangst van mail met opzet uitgeschakeld,\n" " of de uitschakeling is het gevolg van bounces vanaf uw\n" " e-mail adres. In beide gevallen moet u de onderstaande\n" " %(link)s optie wijzigen om de ontvangst van mail weer te\n" " activeren. Neem contact op met %(mailto)s als u vragen\n" " heeft of hulp nodig hebt." #: Mailman/HTMLFormatter.py:164 msgid "" "

    We have received some recent bounces from your\n" " address. Your current bounce score is %(score)s out of " "a\n" " maximum of %(total)s. Please double check that your subscribed\n" " address is correct and that there are no problems with delivery " "to\n" " this address. Your bounce score will be automatically reset if\n" " the problems are corrected soon." msgstr "" "

    Wij hebben recentelijk een aantal bounces ontvangen vanaf uw\n" " adres. Uw huidige bounce score is %(score)s; de " "maximum\n" " score is %(total)s. Wilt u s.v.p. goed controleren of het " "adres\n" " waaronder u bent aangemeld correct is, en dat er geen problemen\n" " zijn met de bezorging van mail op dit adres? Uw bounce score " "zal\n" " automatisch worden gereset als de problemen op korte termijn\n" " worden opgelost." #: Mailman/HTMLFormatter.py:176 msgid "" "(Note - you are subscribing to a list of mailing lists, so the %(type)s " "notice will be sent to the admin address for your membership, %(addr)s.)

    " msgstr "" "(Opmerking - u meldt zich aan op een lijst van maillijsten, dus zal de\n" " %(type)s melding worden verstuurd naar het admin adres voor\n" " uw lidmaatschap, %(addr)s.)

    " #: Mailman/HTMLFormatter.py:186 msgid "" "You will be sent email requesting confirmation, to\n" " prevent others from gratuitously subscribing you." msgstr "" "U krijgt een e-mail toegezonden met het verzoek om uw aanmelding\n" " te bevestigen, ter voorkoming van valse aanmeldingen." #: Mailman/HTMLFormatter.py:189 msgid "" "This is a closed list, which means your subscription\n" " will be held for approval. You will be notified of the list\n" " moderator's decision by email." msgstr "" "Dit is een besloten lijst, wat inhoudt dat voor uw lidmaatschap\n" " goedkeuring is vereist van de lijstmoderator. De beslissing van " "de\n" " moderator krijgt u per e-mail toegestuurd." #: Mailman/HTMLFormatter.py:192 Mailman/HTMLFormatter.py:199 msgid "also " msgstr "tevens " #: Mailman/HTMLFormatter.py:194 msgid "" "You will be sent email requesting confirmation, to\n" " prevent others from gratuitously subscribing you. Once\n" " confirmation is received, your request will be held for " "approval\n" " by the list moderator. You will be notified of the moderator's\n" " decision by email." msgstr "" "Om valse aanmeldingen tegen te gaan, krijgt u een e-mail\n" " toegezonden met het verzoek om de aanmelding te bevestigen.\n" " Na ontvangst van de bevestiging, zal de lijstmoderator uw\n" " aanmelding in beraad nemen. De beslissing van de\n" " moderator krijgt u per e-mail toegestuurd." #: Mailman/HTMLFormatter.py:203 msgid "" "This is %(also)sa private list, which means that the\n" " list of members is not available to non-members." msgstr "" "Dit is %(also)seen besloten lijst, wat betekent\n" " dat de ledenlijst niet toegankelijk is voor niet-leden." #: Mailman/HTMLFormatter.py:206 msgid "" "This is %(also)sa hidden list, which means that the\n" " list of members is available only to the list administrator." msgstr "" "Dit is %(also)seen verborgen lijst, wat betekent\n" " dat de ledenlijst alleen toegankelijk is voor de lijstbeheerder." #: Mailman/HTMLFormatter.py:209 msgid "" "This is %(also)sa public list, which means that the\n" " list of members list is available to everyone." msgstr "" "Dit is %(also)seen publieke lijst, wat betekent\n" " dat de ledenlijst ook toegankelijk is voor niet-leden." #: Mailman/HTMLFormatter.py:212 msgid "" " (but we obscure the addresses so they are not\n" " easily recognizable by spammers)." msgstr "" " (maar wij vermommen de adressen zo dat ze niet\n" " gemakkelijk herkenbaar zijn voor spammers)." #: Mailman/HTMLFormatter.py:217 msgid "" "

    (Note that this is an umbrella list, intended to\n" " have only other mailing lists as members. Among other things,\n" " this means that your confirmation request will be sent to the\n" " `%(sfx)s' account for your address.)" msgstr "" "

    (Let op: dit is een overkoepelende lijst, uitsluitend\n" " bedoeld om andere lijsten als lid te hebben. Dit houdt o.a.\n" " in dat uw aanmeldingsbevestiging zal worden verstuurd naar\n" " het `%(sfx)s' account van uw adres.)" #: Mailman/HTMLFormatter.py:246 msgid "either " msgstr "of " #: Mailman/HTMLFormatter.py:251 msgid "" "To unsubscribe from %(realname)s, get a password reminder,\n" " or change your subscription options %(either)senter your " "subscription\n" " email address:\n" "

    " msgstr "" "Om u af te melden van %(realname)s, om uw wachtwoord toegestuurd te\n" " krijgen of om uw opties te wijzigen, vul %(either)suw\n" " e-mail adres in:\n" "

    " #: Mailman/HTMLFormatter.py:258 msgid "Unsubscribe or edit options" msgstr "Afmelden of opties wijzigen" #: Mailman/HTMLFormatter.py:262 msgid "" "

    ... or select your entry from\n" " the subscribers list (see above)." msgstr "" "

    ... of selecteer uw naam\n" " uit de ledenlijst (zie boven)." #: Mailman/HTMLFormatter.py:264 msgid "" " If you leave the field blank, you will be prompted for\n" " your email address" msgstr "" " Als u dit veld leeg laat, zal straks gevraagd worden om\n" " uw e-mailadres" #: Mailman/HTMLFormatter.py:272 msgid "" "(%(which)s is only available to the list\n" " members.)" msgstr "" "(%(which)s is alleen toegankelijk voor\n" " leden van de lijst.)" #: Mailman/HTMLFormatter.py:276 msgid "" "(%(which)s is only available to the list\n" " administrator.)" msgstr "" "(%(which)s is alleen toegankelijk voor\n" " de lijstbeheerder.)" #: Mailman/HTMLFormatter.py:286 msgid "Click here for the list of " msgstr "Klik hier voor een lijst van " #: Mailman/HTMLFormatter.py:288 msgid " subscribers: " msgstr " leden: " #: Mailman/HTMLFormatter.py:290 msgid "Visit Subscriber list" msgstr "Bekijk de ledenlijst" #: Mailman/HTMLFormatter.py:293 msgid "members" msgstr "leden" #: Mailman/HTMLFormatter.py:294 msgid "Address:" msgstr "Adres:" #: Mailman/HTMLFormatter.py:297 msgid "Admin address:" msgstr "Beheerdersadres:" #: Mailman/HTMLFormatter.py:300 msgid "The subscribers list" msgstr "De ledenlijst" #: Mailman/HTMLFormatter.py:302 msgid "

    Enter your " msgstr "

    Vermeld uw " #: Mailman/HTMLFormatter.py:304 msgid " and password to visit the subscribers list:

    " msgstr " en wachtwoord om toegang te krijgen tot de ledenlijst:

    " #: Mailman/HTMLFormatter.py:309 msgid "Password: " msgstr "Wachtwoord: " #: Mailman/HTMLFormatter.py:313 msgid "Visit Subscriber List" msgstr "Bekijk de ledenlijst" #: Mailman/HTMLFormatter.py:347 msgid "Once a month, your password will be emailed to you as a reminder." msgstr "Maandelijks krijgt u uw wachtwoord toegemaild als herinnering." #: Mailman/HTMLFormatter.py:393 msgid "The current archive" msgstr "Het huidige archief" #: Mailman/Handlers/Acknowledge.py:59 msgid "%(realname)s post acknowledgement" msgstr "%(realname)s ontvangstbevestiging" #: Mailman/Handlers/CalcRecips.py:78 msgid "" "Your urgent message to the %(realname)s mailing list was not authorized for\n" "delivery. The original message as received by Mailman is attached.\n" msgstr "" "Uw dringende bericht aan de %(realname)s maillijst krijgt geen toestemming\n" "om te worden verzonden. Het originele bericht is hierbij gevoegd.\n" #: Mailman/Handlers/Emergency.py:29 msgid "Emergency hold on all list traffic is in effect" msgstr "" "Noodmoderatie in werking getreden: al het berichtverkeer\n" " wordt vastgehouden" #: Mailman/Handlers/Emergency.py:30 Mailman/Handlers/Hold.py:58 msgid "Your message was deemed inappropriate by the moderator." msgstr "Uw bericht is niet in orde bevonden door de moderator." #: Mailman/Handlers/Hold.py:53 msgid "Sender is explicitly forbidden" msgstr "Afzender-adres is nadrukkelijk niet toegestaan" #: Mailman/Handlers/Hold.py:54 msgid "You are forbidden from posting messages to this list." msgstr "U is niet toegestaan berichten te versturen naar deze lijst." #: Mailman/Handlers/Hold.py:57 msgid "Post to moderated list" msgstr "Bericht aan een gemodereerde lijst" #: Mailman/Handlers/Hold.py:61 msgid "Post by non-member to a members-only list" msgstr "Bericht van een niet-lid aan een besloten lijst" #: Mailman/Handlers/Hold.py:62 msgid "Non-members are not allowed to post messages to this list." msgstr "Niet-leden mogen geen berichten versturen naar deze lijst." #: Mailman/Handlers/Hold.py:65 msgid "Posting to a restricted list by sender requires approval" msgstr "" "Voor berichten aan een besloten lijst door de afzender is goedkeuring nodig" #: Mailman/Handlers/Hold.py:66 msgid "This list is restricted; your message was not approved." msgstr "Deze lijst is besloten; uw bericht is niet goedgekeurd." #: Mailman/Handlers/Hold.py:69 msgid "Too many recipients to the message" msgstr "Te veel geadresseerden in het bericht" #: Mailman/Handlers/Hold.py:70 msgid "Please trim the recipient list; it is too long." msgstr "Verminder het aantal geadresseerden; het is te hoog." #: Mailman/Handlers/Hold.py:73 msgid "Message has implicit destination" msgstr "Bericht heeft een 'blinde' bestemming" #: Mailman/Handlers/Hold.py:74 msgid "" "Blind carbon copies or other implicit destinations are\n" "not allowed. Try reposting your message by explicitly including the list\n" "address in the To: or Cc: fields." msgstr "" "Het opnemen van geadresseerden in het Bcc: veld of\n" "andere 'blinde' bestemmingen zijn niet toegestaan. Stuur uw bericht\n" "nogmaals en plaats het lijstadres in het To: of Cc: veld." #: Mailman/Handlers/Hold.py:79 msgid "Message may contain administrivia" msgstr "Bericht bevat wellicht administratieve opdrachten" #: Mailman/Handlers/Hold.py:84 msgid "" "Please do *not* post administrative requests to the mailing\n" "list. If you wish to subscribe, visit %(listurl)s or send a message with " "the\n" "word `help' in it to the request address, %(request)s, for further\n" "instructions." msgstr "" "S.v.p. g��n administratieve verzoeken naar de maillijst\n" "versturen. Als u zich wilt aanmelden, bezoek %(listurl)s of stuur een\n" "bericht met het woord `help' naar %(request)s voor nadere instructies." #: Mailman/Handlers/Hold.py:90 msgid "Message has a suspicious header" msgstr "Bericht heeft een verdachte header" #: Mailman/Handlers/Hold.py:91 msgid "Your message had a suspicious header." msgstr "Uw bericht had een verdachte header." #: Mailman/Handlers/Hold.py:101 msgid "" "Message body is too big: %(size)d bytes with a limit of\n" "%(limit)d KB" msgstr "" "Bericht is te groot: %(size)d bytes. De limiet is\n" "%(limit)d KB" #: Mailman/Handlers/Hold.py:106 msgid "" "Your message was too big; please trim it to less than\n" "%(kb)d KB in size." msgstr "" "Uw bericht was te groot; de omvang mag hooguit\n" "%(kb)d KB zijn." #: Mailman/Handlers/Hold.py:110 msgid "Posting to a moderated newsgroup" msgstr "Berichten naar een gemodereerde nieuwsgroep" #: Mailman/Handlers/Hold.py:250 msgid "Your message to %(listname)s awaits moderator approval" msgstr "Uw bericht aan %(listname)s wacht op goedkeuring door de moderator" #: Mailman/Handlers/Hold.py:269 msgid "%(listname)s post from %(sender)s requires approval" msgstr "Voor berichten van %(sender)s aan %(listname)s is uw goedkeuring nodig" #: Mailman/Handlers/Hold.py:276 msgid "" "If you reply to this message, keeping the Subject: header intact, Mailman " "will\n" "discard the held message. Do this if the message is spam. If you reply to\n" "this message and include an Approved: header with the list password in it, " "the\n" "message will be approved for posting to the list. The Approved: header can\n" "also appear in the first line of the body of the reply." msgstr "" "Als u dit bericht beantwoordt en daarbij de onderwerpregel intact laat,\n" "zal Mailman het vastgehouden bericht negeren. Doe dit als het bericht een\n" "spambericht is. Als u dit bericht beantwoordt en in de onderwerpregel het\n" "woord Approved: en uw wachtwoord vermeldt, zal het bericht worden\n" "goedgekeurd voor doorzending naar de lijst. U mag het woord\n" "Approved: en uw wachtwoord ook vermelden op de eerste regel van\n" "de bodytekst van uw antwoord." #: Mailman/Handlers/MimeDel.py:59 msgid "The message's content type was explicitly disallowed" msgstr "Het inhoudstype van uw bericht is expliciet niet toegestaan" #: Mailman/Handlers/MimeDel.py:64 msgid "The message's content type was not explicitly allowed" msgstr "Het inhoudstype van uw bericht is niet expliciet toegestaan" #: Mailman/Handlers/MimeDel.py:72 msgid "The message's file extension was explicitly disallowed" msgstr "Het bestandstype van het bericht is expliciet niet toegestaan" #: Mailman/Handlers/MimeDel.py:75 msgid "The message's file extension was not explicitly allowed" msgstr "Het bestandstype van het bericht is niet expliciet toegestaan" #: Mailman/Handlers/MimeDel.py:87 msgid "After content filtering, the message was empty" msgstr "Na controle door de inhoudsfilter, was het bericht leeg" #: Mailman/Handlers/MimeDel.py:232 msgid "" "The attached message matched the %(listname)s mailing list's content " "filtering\n" "rules and was prevented from being forwarded on to the list membership. " "You\n" "are receiving the only remaining copy of the discarded message.\n" "\n" msgstr "" "Het bijgevoegde bericht is gecontroleerd door de inhoudsfilter van\n" "de %(listname)s maillijst en tegengehouden. Het wordt niet\n" "doorgestuurd naar de leden van de lijst. U ontvangt hierbij het\n" "enig overgebleven exemplaar van het genegeerde bericht.\n" "\n" #: Mailman/Handlers/MimeDel.py:238 msgid "Content filtered message notification" msgstr "Melding dat berichtinhoud is gefilterd door de inhoudsfilter" #: Mailman/Handlers/Moderate.py:162 msgid "" "You are not allowed to post to this mailing list, and your message has been\n" "automatically rejected. If you think that your messages are being rejected " "in\n" "error, contact the mailing list owner at %(listowner)s." msgstr "" "Het is u niet toegestaan om berichten naar deze maillijst te verzenden, en\n" "uw bericht is automatisch geweigerd. Als u vermoedt dat dit een vergissing\n" "is, neem dan contact op met de lijstbeheerder op %(listowner)s." #: Mailman/Handlers/Moderate.py:178 msgid "Auto-discard notification" msgstr "Melding van automatische negering" #: Mailman/Handlers/Moderate.py:181 msgid "The attached message has been automatically discarded." msgstr "Het bijgevoegde bericht is automatisch genegeerd." #: Mailman/Handlers/Replybot.py:74 msgid "Auto-response for your message to the \"%(realname)s\" mailing list" msgstr "" "Automatische beantwoording van uw bericht aan de \"%(realname)s\" maillijst" #: Mailman/Handlers/Replybot.py:107 msgid "The Mailman Replybot" msgstr "De automatische beantwoorder van Mailman" #: Mailman/Handlers/Scrubber.py:223 msgid "" "An embedded and charset-unspecified text was scrubbed...\n" "Name: %(filename)s\n" "URL: %(url)s\n" msgstr "" "Een ingesloten tekst met niet-gespecificeerde tekenset is gescrubt ...\n" "Naam: %(filename)s\n" "URL: %(url)s\n" #: Mailman/Handlers/Scrubber.py:233 msgid "HTML attachment scrubbed and removed" msgstr "HTML-bijlage gescrubt en verwijderd" #: Mailman/Handlers/Scrubber.py:249 Mailman/Handlers/Scrubber.py:274 msgid "" "An HTML attachment was scrubbed...\n" "URL: %(url)s\n" msgstr "" "Een HTML-bijlage is gescrubt...\n" "URL: %(url)s\n" #: Mailman/Handlers/Scrubber.py:286 msgid "no subject" msgstr "geen onderwerp" #: Mailman/Handlers/Scrubber.py:287 msgid "no date" msgstr "geen datum" #: Mailman/Handlers/Scrubber.py:288 msgid "unknown sender" msgstr "onbekende afzender" #: Mailman/Handlers/Scrubber.py:290 msgid "" "An embedded message was scrubbed...\n" "From: %(who)s\n" "Subject: %(subject)s\n" "Date: %(date)s\n" "Size: %(size)s\n" "URL: %(url)s\n" msgstr "" "Een ingesloten bericht is gescrubt...\n" "Van: %(who)s\n" "Onderwerp: %(subject)s\n" "Datum: %(date)s\n" "Grootte: %(size)s\n" "URL: %(url)s\n" #: Mailman/Handlers/Scrubber.py:322 msgid "" "A non-text attachment was scrubbed...\n" "Name: %(filename)s\n" "Type: %(ctype)s\n" "Size: %(size)d bytes\n" "Desc: %(desc)s\n" "URL: %(url)s\n" msgstr "" "Een niet-tekst bijlage is gescrubt...\n" "Naam: %(filename)s\n" "Type: %(ctype)s\n" "Grootte: %(size)d bytes\n" "Omschrijving: %(desc)s\n" "URL : %(url)s\n" #: Mailman/Handlers/Scrubber.py:358 msgid "Skipped content of type %(partctype)s\n" msgstr "Verwijderde inhoud van type %(partctype)s\n" #: Mailman/Handlers/Scrubber.py:399 msgid "-------------- next part --------------\n" msgstr "------------- volgend deel ------------\n" #: Mailman/Handlers/SpamDetect.py:55 msgid "The message headers matched a filter rule" msgstr "De bericht headers kwamen overeen met een spamfilterregel" #: Mailman/Handlers/SpamDetect.py:135 msgid "Message rejected by filter rule match" msgstr "Bericht geweigerd vanwege overeenkomst met spamfilterregel" #: Mailman/Handlers/ToDigest.py:158 msgid "%(realname)s Digest, Vol %(volume)d, Issue %(issue)d" msgstr "%(realname)s Verzamelmail, Volume %(volume)d, Nummer %(issue)d" #: Mailman/Handlers/ToDigest.py:204 msgid "digest header" msgstr "verzamelmail-header" #: Mailman/Handlers/ToDigest.py:207 msgid "Digest Header" msgstr "Verzamelmail-header" #: Mailman/Handlers/ToDigest.py:220 msgid "Today's Topics:\n" msgstr "Onderwerpen van vandaag:\n" #: Mailman/Handlers/ToDigest.py:300 msgid "Today's Topics (%(msgcount)d messages)" msgstr "Onderwerpen van vandaag (%(msgcount)d berichten)" #: Mailman/Handlers/ToDigest.py:326 msgid "[Message discarded by content filter]" msgstr "[Bericht genegeerd door inhoudsfilter]" #: Mailman/Handlers/ToDigest.py:354 msgid "digest footer" msgstr "verzamelmail-voettekst" #: Mailman/Handlers/ToDigest.py:357 msgid "Digest Footer" msgstr "Verzamelmail-voettekst" #: Mailman/Handlers/ToDigest.py:371 msgid "End of " msgstr "Eind van " #: Mailman/ListAdmin.py:295 msgid "Posting of your message titled \"%(subject)s\"" msgstr "Verzending van uw bericht met de titel \"%(subject)s\"" #: Mailman/ListAdmin.py:334 msgid "Forward of moderated message" msgstr "Doorsturen van gemodereerd bericht" #: Mailman/ListAdmin.py:390 msgid "New subscription request to list %(realname)s from %(addr)s" msgstr "Nieuw aanmeldingsverzoek aan lijst %(realname)s van %(addr)s" #: Mailman/ListAdmin.py:413 msgid "Subscription request" msgstr "Aanmeldingsverzoek" #: Mailman/ListAdmin.py:442 msgid "New unsubscription request from %(realname)s by %(addr)s" msgstr "Nieuw afmeldingsverzoek van %(realname)s door %(addr)s" #: Mailman/ListAdmin.py:465 msgid "Unsubscription request" msgstr "Afmeldingsverzoek" #: Mailman/ListAdmin.py:496 msgid "Original Message" msgstr "Oorspronkelijk bericht" #: Mailman/ListAdmin.py:499 msgid "Request to mailing list %(realname)s rejected" msgstr "Verzoek aan maillijst %(realname)s geweigerd" #: Mailman/MTA/Manual.py:66 msgid "" "The mailing list `%(listname)s' has been created via the through-the-web\n" "interface. In order to complete the activation of this mailing list, the\n" "proper /etc/aliases (or equivalent) file must be updated. The program\n" "`newaliases' may also have to be run.\n" "\n" "Here are the entries for the /etc/aliases file:\n" msgstr "" #: Mailman/MTA/Manual.py:77 msgid "" "To finish creating your mailing list, you must edit your /etc/aliases (or\n" "equivalent) file by adding the following lines, and possibly running the\n" "`newaliases' program:\n" msgstr "" #: Mailman/MTA/Manual.py:82 msgid "## %(listname)s mailing list" msgstr "" #: Mailman/MTA/Manual.py:99 msgid "Mailing list creation request for list %(listname)s" msgstr "" #: Mailman/MTA/Manual.py:113 msgid "" "The mailing list `%(listname)s' has been removed via the through-the-web\n" "interface. In order to complete the de-activation of this mailing list, " "the\n" "appropriate /etc/aliases (or equivalent) file must be updated. The program\n" "`newaliases' may also have to be run.\n" "\n" "Here are the entries in the /etc/aliases file that should be removed:\n" msgstr "" #: Mailman/MTA/Manual.py:123 msgid "" "\n" "To finish removing your mailing list, you must edit your /etc/aliases (or\n" "equivalent) file by removing the following lines, and possibly running the\n" "`newaliases' program:\n" "\n" "## %(listname)s mailing list" msgstr "" #: Mailman/MTA/Manual.py:142 msgid "Mailing list removal request for list %(listname)s" msgstr "" #: Mailman/MTA/Postfix.py:306 msgid "checking permissions on %(file)s" msgstr "" #: Mailman/MTA/Postfix.py:316 msgid "%(file)s permissions must be 066x (got %(octmode)s)" msgstr "" #: Mailman/MTA/Postfix.py:318 Mailman/MTA/Postfix.py:345 #: Mailman/MTA/Postfix.py:356 bin/check_perms:125 bin/check_perms:153 #: bin/check_perms:163 bin/check_perms:174 bin/check_perms:199 #: bin/check_perms:216 bin/check_perms:242 bin/check_perms:265 #: bin/check_perms:284 bin/check_perms:298 bin/check_perms:318 #: bin/check_perms:355 msgid "(fixing)" msgstr "" #: Mailman/MTA/Postfix.py:334 msgid "checking ownership of %(dbfile)s" msgstr "" #: Mailman/MTA/Postfix.py:342 msgid "%(dbfile)s owned by %(owner)s (must be owned by %(user)s" msgstr "" #: Mailman/MTA/Postfix.py:354 msgid "%(dbfile)s permissions must be 066x (got %(octmode)s)" msgstr "" #: Mailman/MailList.py:216 msgid "Your confirmation is required to join the %(listname)s mailing list" msgstr "" "Uw bevesting is vereist om deel te kunnen nemen aan de %(listname)s maillijst" #: Mailman/MailList.py:227 msgid "Your confirmation is required to leave the %(listname)s mailing list" msgstr "Uw bevestiging is vereist voor afmelding van de %(listname)s maillijst" #: Mailman/MailList.py:883 Mailman/MailList.py:1305 msgid " from %(remote)s" msgstr " van %(remote)s" #: Mailman/MailList.py:916 msgid "subscriptions to %(realname)s require moderator approval" msgstr "aanmeldingen bij %(realname)s vereisen goedkeuring door moderator" #: Mailman/MailList.py:985 bin/add_members:245 msgid "%(realname)s subscription notification" msgstr "%(realname)s aanmeldingsbericht" #: Mailman/MailList.py:1004 msgid "unsubscriptions require moderator approval" msgstr "afmeldingen vereisen goedkeuring door moderator" #: Mailman/MailList.py:1024 msgid "%(realname)s unsubscribe notification" msgstr "%(realname)s afmeldingsbericht" #: Mailman/MailList.py:1214 msgid "subscriptions to %(name)s require administrator approval" msgstr "aanmeldingen bij %(name)s vereisen goedkeuring door beheerder" #: Mailman/MailList.py:1477 msgid "Last autoresponse notification for today" msgstr "Laatste automatisch bericht voor vandaag" #: Mailman/Queue/BounceRunner.py:321 msgid "" "The attached message was received as a bounce, but either the bounce format\n" "was not recognized, or no member addresses could be extracted from it. " "This\n" "mailing list has been configured to send all unrecognized bounce messages " "to\n" "the list administrator(s).\n" "\n" "For more information see:\n" "%(adminurl)s\n" "\n" msgstr "" "Het bijgevoegde bericht is ontvangen als een bounce, maar noch het bounce\n" "format, noch het adres van het lid kon worden herkend. Deze maillijst is\n" "zodanig geconfigureerd dat alle onherkenbare bounce berichten aan de\n" "lijstbeheerder(s) worden verzonden.\n" "\n" "Voor meer informatie, zie:\n" "%(adminurl)s\n" "\n" #: Mailman/Queue/BounceRunner.py:331 msgid "Uncaught bounce notification" msgstr "Niet onderschepte bouncemelding" #: Mailman/Queue/CommandRunner.py:92 msgid "Ignoring non-text/plain MIME parts" msgstr "Niet-tekst/gewone MIME onderdelen genegeerd" #: Mailman/Queue/CommandRunner.py:148 msgid "" "The results of your email command are provided below.\n" "Attached is your original message.\n" msgstr "" "De resultaten van uw e-mail opdracht zijn hieronder weergegeven.\n" "Bijgevoegd is uw oorspronkelijke bericht.\n" #: Mailman/Queue/CommandRunner.py:153 msgid "- Results:" msgstr "- Resultaten:" #: Mailman/Queue/CommandRunner.py:159 msgid "" "\n" "- Unprocessed:" msgstr "" "\n" "- Niet verwerkt:" #: Mailman/Queue/CommandRunner.py:163 msgid "" "No commands were found in this message.\n" "To obtain instructions, send a message containing just the word \"help\".\n" msgstr "" "In dit bericht werden geen opdrachten aangetroffen.\n" "Voor nadere instructies, stuur een bericht dat alleen het woord \"help\" " "bevat.\n" #: Mailman/Queue/CommandRunner.py:168 msgid "" "\n" "- Ignored:" msgstr "" "\n" "- Genegeerd:" #: Mailman/Queue/CommandRunner.py:170 msgid "" "\n" "- Done.\n" "\n" msgstr "" "\n" "- Gedaan.\n" "\n" #: Mailman/Queue/CommandRunner.py:194 msgid "The results of your email commands" msgstr "De resultaten van uw e-mail opdrachten" #: Mailman/htmlformat.py:639 msgid "Delivered by Mailman
    version %(version)s" msgstr "Bezorgd door Mailman
    versie %(version)s" #: Mailman/htmlformat.py:640 msgid "Python Powered" msgstr "Python Powered" #: Mailman/htmlformat.py:641 msgid "Gnu's Not Unix" msgstr "Gnu's Not Unix" #: Mailman/i18n.py:98 msgid "Mon" msgstr "Ma" #: Mailman/i18n.py:98 msgid "Thu" msgstr "Do" #: Mailman/i18n.py:98 msgid "Tue" msgstr "Di" #: Mailman/i18n.py:98 msgid "Wed" msgstr "Wo" #: Mailman/i18n.py:99 msgid "Fri" msgstr "Vr" #: Mailman/i18n.py:99 msgid "Sat" msgstr "Za" #: Mailman/i18n.py:99 msgid "Sun" msgstr "Zo" #: Mailman/i18n.py:103 msgid "Apr" msgstr "Apr" #: Mailman/i18n.py:103 msgid "Feb" msgstr "Feb" #: Mailman/i18n.py:103 msgid "Jan" msgstr "Jan" #: Mailman/i18n.py:103 msgid "Jun" msgstr "Jun" #: Mailman/i18n.py:103 msgid "Mar" msgstr "Mrt" #: Mailman/i18n.py:104 msgid "Aug" msgstr "Aug" #: Mailman/i18n.py:104 msgid "Dec" msgstr "Dec" #: Mailman/i18n.py:104 msgid "Jul" msgstr "Jul" #: Mailman/i18n.py:104 msgid "Nov" msgstr "Nov" #: Mailman/i18n.py:104 msgid "Oct" msgstr "Okt" #: Mailman/i18n.py:104 msgid "Sep" msgstr "Sep" #: Mailman/i18n.py:107 msgid "Server Local Time" msgstr "Lokale tijd server" #: Mailman/i18n.py:146 msgid "" "%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i" msgstr "" "%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i" #: bin/add_members:26 msgid "" "Add members to a list from the command line.\n" "\n" "Usage:\n" " add_members [options] listname\n" "\n" "Options:\n" "\n" " --regular-members-file=file\n" " -r file\n" " A file containing addresses of the members to be added, one\n" " address per line. This list of people become non-digest\n" " members. If file is `-', read addresses from stdin. Note that\n" " -n/--non-digest-members-file are deprecated synonyms for this " "option.\n" "\n" " --digest-members-file=file\n" " -d file\n" " Similar to above, but these people become digest members.\n" "\n" " --welcome-msg=\n" " -w \n" " Set whether or not to send the list members a welcome message,\n" " overriding whatever the list's `send_welcome_msg' setting is.\n" "\n" " --admin-notify=\n" " -a \n" " Set whether or not to send the list administrators a notification " "on\n" " the success/failure of these subscriptions, overriding whatever the\n" " list's `admin_notify_mchanges' setting is.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname\n" " The name of the Mailman list you are adding members to. It must\n" " already exist.\n" "\n" "You must supply at least one of -r and -d options. At most one of the\n" "files can be `-'.\n" msgstr "" #: bin/add_members:137 msgid "Already a member: %(member)s" msgstr "" #: bin/add_members:143 msgid "Bad/Invalid email address: blank line" msgstr "" #: bin/add_members:145 msgid "Bad/Invalid email address: %(member)s" msgstr "" #: bin/add_members:147 msgid "Hostile address (illegal characters): %(member)s" msgstr "" #: bin/add_members:149 msgid "Subscribed: %(member)s" msgstr "" #: bin/add_members:194 msgid "Bad argument to -w/--welcome-msg: %(arg)s" msgstr "" #: bin/add_members:201 msgid "Bad argument to -a/--admin-notify: %(arg)s" msgstr "" #: bin/add_members:207 msgid "Cannot read both digest and normal members from standard input." msgstr "" #: bin/add_members:213 bin/config_list:109 bin/export.py:272 #: bin/find_member:97 bin/inject:91 bin/list_admins:90 bin/list_members:232 #: bin/sync_members:222 cron/bumpdigests:86 msgid "No such list: %(listname)s" msgstr "" #: bin/add_members:233 bin/change_pw:159 bin/check_db:114 bin/discard:83 #: bin/sync_members:244 bin/update:575 cron/bumpdigests:78 msgid "Nothing to do." msgstr "" #: bin/arch:19 msgid "" "Rebuild a list's archive.\n" "\n" "Use this command to rebuild the archives for a mailing list. You may want " "to\n" "do this if you edit some messages in an archive, or remove some messages " "from\n" "an archive.\n" "\n" "Usage: %(PROGRAM)s [options] []\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" " -q / --quiet\n" " Make the archiver output less verbose.\n" "\n" " --wipe\n" " First wipe out the original archive before regenerating. You " "usually\n" " want to specify this argument unless you're generating the archive " "in\n" " chunks.\n" "\n" " -s N\n" " --start=N\n" " Start indexing at article N, where article 0 is the first in the " "mbox.\n" " Defaults to 0.\n" "\n" " -e M\n" " --end=M\n" " End indexing at article M. This script is not very efficient with\n" " respect to memory management, and for large archives, it may not be\n" " possible to index the mbox entirely. For that reason, you can " "specify\n" " the start and end article numbers.\n" "\n" "Where is the path to a list's complete mbox archive. Usually this " "will\n" "be some path in the archives/private directory. For example:\n" "\n" "%% bin/arch mylist archives/private/mylist.mbox/mylist.mbox\n" "\n" " is optional. If it is missing, it is calculated.\n" msgstr "" #: bin/arch:125 msgid "listname is required" msgstr "" #: bin/arch:143 bin/change_pw:107 bin/config_list:256 msgid "" "No such list \"%(listname)s\"\n" "%(e)s" msgstr "" #: bin/arch:183 msgid "Cannot open mbox file %(mbox)s: %(msg)s" msgstr "" #: bin/b4b5-archfix:19 msgid "" "Fix the MM2.1b4 archives.\n" "\n" "Usage: %(PROGRAM)s [options] file ...\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" "Only use this to `fix' some archive database files that may have gotten\n" "written in Mailman 2.1b4 with some bogus data. Use like this from your\n" "$PREFIX directory\n" "\n" "%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n" "\n" "(note the backquotes are required)\n" "\n" "You will need to run `bin/check_perms -f' after running this script.\n" msgstr "" #: bin/change_pw:20 msgid "" "Change a list's password.\n" "\n" "Prior to Mailman 2.1, list passwords were kept in crypt'd format -- " "usually.\n" "Some Python installations didn't have the crypt module available, so they'd\n" "fall back to md5. Then suddenly the Python installation might grow a crypt\n" "module and all list passwords would be broken.\n" "\n" "In Mailman 2.1, all list and site passwords are stored in SHA1 hexdigest\n" "form. This breaks list passwords for all existing pre-Mailman 2.1 lists, " "and\n" "since those passwords aren't stored anywhere in plain text, they cannot be\n" "retrieved and updated.\n" "\n" "Thus, this script generates new passwords for a list, and optionally sends " "it\n" "to all the owners of the list.\n" "\n" "Usage: change_pw [options]\n" "\n" "Options:\n" "\n" " --all / -a\n" " Change the password for all lists.\n" "\n" " --domain=domain\n" " -d domain\n" " Change the password for all lists in the virtual domain `domain'. " "It\n" " is okay to give multiple -d options.\n" "\n" " --listname=listname\n" " -l listname\n" " Change the password only for the named list. It is okay to give\n" " multiple -l options.\n" "\n" " --password=newpassword\n" " -p newpassword\n" " Use the supplied plain text password `newpassword' as the new " "password\n" " for any lists that are being changed (as specified by the -a, -d, " "and\n" " -l options). If not given, lists will be assigned a randomly\n" " generated new password.\n" "\n" " --quiet / -q\n" " Don't notify list owners of the new password. You'll have to have\n" " some other way of letting the list owners know the new password\n" " (presumably out-of-band).\n" "\n" " --help / -h\n" " Print this help message and exit.\n" msgstr "" #: bin/change_pw:145 msgid "Bad arguments: %(strargs)s" msgstr "" #: bin/change_pw:149 msgid "Empty list passwords are not allowed" msgstr "" #: bin/change_pw:181 msgid "New %(listname)s password: %(notifypassword)s" msgstr "" #: bin/change_pw:190 msgid "Your new %(listname)s list password" msgstr "" #: bin/change_pw:191 msgid "" "The site administrator at %(hostname)s has changed the password for your\n" "mailing list %(listname)s. It is now\n" "\n" " %(notifypassword)s\n" "\n" "Please be sure to use this for all future list administration. You may " "want\n" "to log in now to your list and change the password to something more to " "your\n" "liking. Visit your list admin page at\n" "\n" " %(adminurl)s\n" msgstr "" #: bin/check_db:19 msgid "" "Check a list's config database file for integrity.\n" "\n" "All of the following files are checked:\n" "\n" " config.pck\n" " config.pck.last\n" " config.db\n" " config.db.last\n" " config.safety\n" "\n" "It's okay if any of these are missing. config.pck and config.pck.last are\n" "pickled versions of the config database file for 2.1a3 and beyond. config." "db\n" "and config.db.last are used in all earlier versions, and these are Python\n" "marshals. config.safety is a pickle written by 2.1a3 and beyond when the\n" "primary config.pck file could not be read.\n" "\n" "Usage: %(PROGRAM)s [options] [listname [listname ...]]\n" "\n" "Options:\n" "\n" " --all / -a\n" " Check the databases for all lists. Otherwise only the lists named " "on\n" " the command line are checked.\n" "\n" " --verbose / -v\n" " Verbose output. The state of every tested file is printed.\n" " Otherwise only corrupt files are displayed.\n" "\n" " --help / -h\n" " Print this text and exit.\n" msgstr "" #: bin/check_db:119 msgid "No list named:" msgstr "" #: bin/check_db:128 msgid "List:" msgstr "" #: bin/check_db:148 msgid " %(file)s: okay" msgstr "" #: bin/check_perms:20 msgid "" "Check the permissions for the Mailman installation.\n" "\n" "Usage: %(PROGRAM)s [-f] [-v] [-h]\n" "\n" "With no arguments, just check and report all the files that have bogus\n" "permissions or group ownership. With -f (and run as root), fix all the\n" "permission problems found. With -v be verbose.\n" msgstr "" #: bin/check_perms:110 msgid " checking gid and mode for %(path)s" msgstr "" #: bin/check_perms:122 msgid "%(path)s bad group (has: %(groupname)s, expected %(MAILMAN_GROUP)s)" msgstr "" #: bin/check_perms:151 msgid "directory permissions must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:160 msgid "source perms must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:171 msgid "article db files must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:183 msgid "checking mode for %(prefix)s" msgstr "" #: bin/check_perms:193 msgid "WARNING: directory does not exist: %(d)s" msgstr "" #: bin/check_perms:197 msgid "directory must be at least 02775: %(d)s" msgstr "" #: bin/check_perms:209 msgid "checking perms on %(private)s" msgstr "" #: bin/check_perms:214 msgid "%(private)s must not be other-readable" msgstr "" #: bin/check_perms:223 msgid "" "Warning: Private archive directory is other-executable (o+x).\n" " This could allow other users on your system to read private " "archives.\n" " If you're on a shared multiuser system, you should consult the\n" " installation manual on how to fix this." msgstr "" #: bin/check_perms:240 msgid "mbox file must be at least 0660:" msgstr "" #: bin/check_perms:263 msgid "%(dbdir)s \"other\" perms must be 000" msgstr "" #: bin/check_perms:273 msgid "checking cgi-bin permissions" msgstr "" #: bin/check_perms:278 msgid " checking set-gid for %(path)s" msgstr "" #: bin/check_perms:282 msgid "%(path)s must be set-gid" msgstr "" #: bin/check_perms:292 msgid "checking set-gid for %(wrapper)s" msgstr "" #: bin/check_perms:296 msgid "%(wrapper)s must be set-gid" msgstr "" #: bin/check_perms:306 msgid "checking permissions on %(pwfile)s" msgstr "" #: bin/check_perms:315 msgid "%(pwfile)s permissions must be exactly 0640 (got %(octmode)s)" msgstr "" #: bin/check_perms:339 msgid "checking permissions on list data" msgstr "" #: bin/check_perms:345 msgid " checking permissions on: %(path)s" msgstr "" #: bin/check_perms:353 msgid "file permissions must be at least 660: %(path)s" msgstr "" #: bin/check_perms:398 msgid "No problems found" msgstr "" #: bin/check_perms:400 msgid "Problems found:" msgstr "" #: bin/check_perms:401 msgid "Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix" msgstr "" #: bin/cleanarch:20 msgid "" "Clean up an .mbox archive file.\n" "\n" "The archiver looks for Unix-From lines separating messages in an mbox " "archive\n" "file. For compatibility, it specifically looks for lines that start with\n" "\"From \" -- i.e. the letters capital-F, lowercase-r, o, m, space, ignoring\n" "everything else on the line.\n" "\n" "Normally, any lines that start \"From \" in the body of a message should be\n" "escaped such that a > character is actually the first on a line. It is\n" "possible though that body lines are not actually escaped. This script\n" "attempts to fix these by doing a stricter test of the Unix-From lines. Any\n" "lines that start \"From \" but do not pass this stricter test are escaped " "with a\n" "> character.\n" "\n" "Usage: cleanarch [options] < inputfile > outputfile\n" "Options:\n" " -s n\n" " --status=n\n" " Print a # character every n lines processed\n" "\n" " -q / --quiet\n" " Don't print changed line information to standard error.\n" "\n" " -n / --dry-run\n" " Don't actually output anything.\n" "\n" " -h / --help\n" " Print this message and exit\n" msgstr "" #: bin/cleanarch:83 msgid "Unix-From line changed: %(lineno)d" msgstr "" #: bin/cleanarch:111 msgid "Bad status number: %(arg)s" msgstr "" #: bin/cleanarch:167 msgid "%(messages)d messages found" msgstr "" #: bin/clone_member:19 msgid "" "Clone a member address.\n" "\n" "Cloning a member address means that a new member will be added who has all " "the\n" "same options and passwords as the original member address. Note that this\n" "operation is fairly trusting of the user who runs it -- it does no\n" "verification to the new address, it does not send out a welcome message, " "etc.\n" "\n" "The existing member's subscription is usually not modified in any way. If " "you\n" "want to remove the old address, use the -r flag. If you also want to " "change\n" "any list admin addresses, use the -a flag.\n" "\n" "Usage:\n" " clone_member [options] fromoldaddr tonewaddr\n" "\n" "Where:\n" "\n" " --listname=listname\n" " -l listname\n" " Check and modify only the named mailing lists. If -l is not given,\n" " then all mailing lists are scanned from the address. Multiple -l\n" " options can be supplied.\n" "\n" " --remove\n" " -r\n" " Remove the old address from the mailing list after it's been " "cloned.\n" "\n" " --admin\n" " -a\n" " Scan the list admin addresses for the old address, and clone or " "change\n" " them too.\n" "\n" " --quiet\n" " -q\n" " Do the modifications quietly.\n" "\n" " --nomodify\n" " -n\n" " Print what would be done, but don't actually do it. Inhibits the\n" " --quiet flag.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " fromoldaddr (`from old address') is the old address of the user. " "tonewaddr\n" " (`to new address') is the new address of the user.\n" "\n" msgstr "" #: bin/clone_member:94 msgid "processing mailing list:" msgstr "" #: bin/clone_member:101 msgid " scanning list owners:" msgstr "" #: bin/clone_member:119 msgid " new list owners:" msgstr "" #: bin/clone_member:121 msgid "(no change)" msgstr "" #: bin/clone_member:130 msgid " address not found:" msgstr "" #: bin/clone_member:145 msgid " clone address added:" msgstr "" #: bin/clone_member:148 msgid " clone address is already a member:" msgstr "" #: bin/clone_member:151 msgid " original address removed:" msgstr "" #: bin/clone_member:202 msgid "Not a valid email address: %(toaddr)s" msgstr "" #: bin/clone_member:215 msgid "" "Error opening list \"%(listname)s\", skipping.\n" "%(e)s" msgstr "" #: bin/config_list:20 msgid "" "Configure a list from a text file description.\n" "\n" "Usage: config_list [options] listname\n" "\n" "Options:\n" " --inputfile filename\n" " -i filename\n" " Configure the list by assigning each module-global variable in the\n" " file to an attribute on the list object, then saving the list. The\n" " named file is loaded with execfile() and must be legal Python code.\n" " Any variable that isn't already an attribute of the list object is\n" " ignored (a warning message is printed). See also the -c option.\n" "\n" " A special variable named `mlist' is put into the globals during the\n" " execfile, which is bound to the actual MailList object. This lets " "you\n" " do all manner of bizarre thing to the list object, but BEWARE! " "Using\n" " this can severely (and possibly irreparably) damage your mailing " "list!\n" "\n" " --outputfile filename\n" " -o filename\n" " Instead of configuring the list, print out a list's configuration\n" " variables in a format suitable for input using this script. In " "this\n" " way, you can easily capture the configuration settings for a\n" " particular list and imprint those settings on another list. " "filename\n" " is the file to output the settings to. If filename is `-', " "standard\n" " out is used.\n" "\n" " --checkonly\n" " -c\n" " With this option, the modified list is not actually changed. Only\n" " useful with -i.\n" "\n" " --verbose\n" " -v\n" " Print the name of each attribute as it is being changed. Only " "useful\n" " with -i.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" "The options -o and -i are mutually exclusive.\n" "\n" msgstr "" #: bin/config_list:117 msgid "" "# -*- python -*-\n" "# -*- coding: %(charset)s -*-\n" "## \"%(listname)s\" mailing list configuration settings\n" "## captured on %(when)s\n" msgstr "" #: bin/config_list:143 msgid "options" msgstr "" #: bin/config_list:202 msgid "legal values are:" msgstr "" #: bin/config_list:269 msgid "attribute \"%(k)s\" ignored" msgstr "" #: bin/config_list:272 msgid "attribute \"%(k)s\" changed" msgstr "" #: bin/config_list:278 msgid "Non-standard property restored: %(k)s" msgstr "" #: bin/config_list:286 msgid "Invalid value for property: %(k)s" msgstr "" #: bin/config_list:288 msgid "Bad email address for option %(k)s: %(v)s" msgstr "" #: bin/config_list:345 msgid "Only one of -i or -o is allowed" msgstr "" #: bin/config_list:347 msgid "One of -i or -o is required" msgstr "" #: bin/config_list:351 msgid "List name is required" msgstr "" #: bin/convert.py:19 msgid "" "Convert a list's interpolation strings from %-strings to $-strings.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r convert \n" msgstr "" #: bin/convert.py:38 bin/fix_url.py:85 msgid "Saving list" msgstr "" #: bin/convert.py:44 bin/fix_url.py:51 bin/reset_pw.py:57 msgid "%%%" msgstr "" #: bin/discard:19 msgid "" "Discard held messages.\n" "\n" "Usage:\n" " discard [options] file ...\n" "\n" "Options:\n" " --help / -h\n" " Print this help message and exit.\n" "\n" " --quiet / -q\n" " Don't print status messages.\n" msgstr "" #: bin/discard:94 msgid "Ignoring non-held message: %(f)s" msgstr "" #: bin/discard:100 msgid "Ignoring held msg w/bad id: %(f)s" msgstr "" #: bin/discard:112 msgid "Discarded held msg #%(id)s for list %(listname)s" msgstr "" #: bin/dumpdb:19 msgid "" "Dump the contents of any Mailman `database' file.\n" "\n" "Usage: %(PROGRAM)s [options] filename\n" "\n" "Options:\n" "\n" " --marshal/-m\n" " Assume the file contains a Python marshal, overridding any " "automatic\n" " guessing.\n" "\n" " --pickle/-p\n" " Assume the file contains a Python pickle, overridding any automatic\n" " guessing.\n" "\n" " --noprint/-n\n" " Don't attempt to pretty print the object. This is useful if " "there's\n" " some problem with the object and you just want to get an unpickled\n" " representation. Useful with `python -i bin/dumpdb '. In " "that\n" " case, the root of the tree will be left in a global called \"msg\".\n" "\n" " --help/-h\n" " Print this help message and exit\n" "\n" "If the filename ends with `.db', then it is assumed that the file contains " "a\n" "Python marshal. If the file ends with `.pck' then it is assumed to contain " "a\n" "Python pickle. In either case, if you want to override the default " "assumption\n" "-- or if the file ends in neither suffix -- use the -p or -m flags.\n" msgstr "" #: bin/dumpdb:105 msgid "No filename given." msgstr "" #: bin/dumpdb:108 msgid "Bad arguments: %(pargs)s" msgstr "" #: bin/dumpdb:118 msgid "Please specify either -p or -m." msgstr "" #: bin/dumpdb:133 msgid "[----- start %(typename)s file -----]" msgstr "" #: bin/dumpdb:139 msgid "[----- end %(typename)s file -----]" msgstr "" #: bin/dumpdb:142 msgid "<----- start object %(cnt)s ----->" msgstr "" #: bin/export.py:20 msgid "Export an XML representation of a mailing list." msgstr "" #: bin/export.py:320 msgid "" "%%prog [options]\n" "\n" "Export the configuration and members of a mailing list in XML format." msgstr "" #: bin/export.py:326 msgid "" "Output XML to FILENAME. If not given, or if FILENAME is '-', standard out " "is\n" "used." msgstr "" #: bin/export.py:330 msgid "" "Specify the RFC 2307 style hashing scheme for passwords included in the\n" "output. Use -P to get a list of supported schemes, which are\n" "case-insensitive." msgstr "" #: bin/export.py:335 msgid "" "List the supported password hashing schemes and exit. The scheme labels " "are\n" "case-insensitive." msgstr "" #: bin/export.py:340 msgid "" "The list to include in the output. If not given, then all mailing lists " "are\n" "included in the XML output. Multiple -l flags may be given." msgstr "" #: bin/export.py:346 msgid "Unexpected arguments" msgstr "" #: bin/export.py:352 msgid "Invalid password scheme" msgstr "" #: bin/find_member:19 msgid "" "Find all lists that a member's address is on.\n" "\n" "Usage:\n" " find_member [options] regex [regex [...]]\n" "\n" "Where:\n" " --listname=listname\n" " -l listname\n" " Include only the named list in the search.\n" "\n" " --exclude=listname\n" " -x listname\n" " Exclude the named list from the search.\n" "\n" " --owners\n" " -w\n" " Search list owners as well as members.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " regex\n" " A Python regular expression to match against.\n" "\n" "The interaction between -l and -x is as follows. If any -l option is given\n" "then only the named list will be included in the search. If any -x option " "is\n" "given but no -l option is given, then all lists will be search except those\n" "specifically excluded.\n" "\n" "Regular expression syntax is Perl5-like, using the Python re module. " "Complete\n" "specifications are at:\n" "\n" "http://www.python.org/doc/current/lib/module-re.html\n" "\n" "Address matches are case-insensitive, but case-preserved addresses are\n" "displayed.\n" "\n" msgstr "" #: bin/find_member:159 msgid "Search regular expression required" msgstr "" #: bin/find_member:164 msgid "No lists to search" msgstr "" #: bin/find_member:173 msgid "found in:" msgstr "" #: bin/find_member:179 msgid "(as owner)" msgstr "" #: bin/fix_url.py:19 msgid "" "Reset a list's web_page_url attribute to the default setting.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r fix_url listname [options]\n" "\n" "Options:\n" " -u urlhost\n" " --urlhost=urlhost\n" " Look up urlhost in the virtual host table and set the web_page_url " "and\n" " host_name attributes of the list to the values found. This\n" " essentially moves the list from one virtual domain to another.\n" "\n" " Without this option, the default web_page_url and host_name values " "are\n" " used.\n" "\n" " -v / --verbose\n" " Print what the script is doing.\n" "\n" "If run standalone, it prints this help text and exits.\n" msgstr "" #: bin/fix_url.py:80 msgid "Setting web_page_url to: %(web_page_url)s" msgstr "" #: bin/fix_url.py:83 msgid "Setting host_name to: %(mailhost)s" msgstr "" #: bin/genaliases:19 msgid "" "Regenerate Mailman specific aliases from scratch.\n" "\n" "The actual output depends on the value of the `MTA' variable in your mm_cfg." "py\n" "file.\n" "\n" "Usage: genaliases [options]\n" "Options:\n" "\n" " -q/--quiet\n" " Some MTA output can include more verbose help text. Use this to " "tone\n" " down the verbosity.\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: bin/inject:20 msgid "" "Inject a message from a file into Mailman's incoming queue.\n" "\n" "Usage: inject [options] [filename]\n" "\n" "Options:\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" " -l listname\n" " --listname=listname\n" " The name of the list to inject this message to. Required.\n" "\n" " -q queuename\n" " --queue=queuename\n" " The name of the queue to inject the message to. The queuename must " "be\n" " one of the directories inside the qfiles directory. If omitted, " "the\n" " incoming queue is used.\n" "\n" "filename is the name of the plaintext message file to inject. If omitted,\n" "standard input is used.\n" msgstr "" #: bin/inject:84 msgid "Bad queue directory: %(qdir)s" msgstr "" #: bin/inject:89 msgid "A list name is required" msgstr "" #: bin/list_admins:20 msgid "" "List all the owners of a mailing list.\n" "\n" "Usage: %(program)s [options] listname ...\n" "\n" "Where:\n" "\n" " --all-vhost=vhost\n" " -v=vhost\n" " List the owners of all the mailing lists for the given virtual " "host.\n" "\n" " --all\n" " -a\n" " List the owners of all the mailing lists on this system.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" "`listname' is the name of the mailing list to print the owners of. You can\n" "have more than one named list on the command line.\n" msgstr "" #: bin/list_admins:97 msgid "List: %(listname)s, \tOwners: %(owners)s" msgstr "" #: bin/list_lists:19 msgid "" "List all mailing lists.\n" "\n" "Usage: %(program)s [options]\n" "\n" "Where:\n" "\n" " -a / --advertised\n" " List only those mailing lists that are publically advertised\n" "\n" " --virtual-host-overview=domain\n" " -V domain\n" " List only those mailing lists that are homed to the given virtual\n" " domain. This only works if the VIRTUAL_HOST_OVERVIEW variable is\n" " set.\n" "\n" " -b / --bare\n" " Displays only the list name, with no description.\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" msgstr "" #: bin/list_lists:105 msgid "No matching mailing lists found" msgstr "" #: bin/list_lists:109 msgid "matching mailing lists found:" msgstr "" #: bin/list_members:19 msgid "" "List all the members of a mailing list.\n" "\n" "Usage: %(PROGRAM)s [options] listname\n" "\n" "Where:\n" "\n" " --output file\n" " -o file\n" " Write output to specified file instead of standard out.\n" "\n" " --regular / -r\n" " Print just the regular (non-digest) members.\n" "\n" " --digest[=kind] / -d [kind]\n" " Print just the digest members. Optional argument can be \"mime\" " "or\n" " \"plain\" which prints just the digest members receiving that kind " "of\n" " digest.\n" "\n" " --nomail[=why] / -n [why]\n" " Print the members that have delivery disabled. Optional argument " "can\n" " be \"byadmin\", \"byuser\", \"bybounce\", or \"unknown\" which " "prints just the\n" " users who have delivery disabled for that reason. It can also be\n" " \"enabled\" which prints just those member for whom delivery is\n" " enabled.\n" "\n" " --fullnames / -f\n" " Include the full names in the output.\n" "\n" " --preserve / -p\n" " Output member addresses case preserved the way they were added to " "the\n" " list. Otherwise, addresses are printed in all lowercase.\n" "\n" " --invalid / -i\n" " Print only the addresses in the membership list that are invalid.\n" " Ignores -r, -d, -n.\n" "\n" " --unicode / -u\n" " Print addresses which are stored as Unicode objects instead of " "normal\n" " string objects. Ignores -r, -d, -n.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname is the name of the mailing list to use.\n" "\n" "Note that if neither -r or -d is supplied, both regular members are printed\n" "first, followed by digest members, but no indication is given as to address\n" "status.\n" msgstr "" #: bin/list_members:191 msgid "Bad --nomail option: %(why)s" msgstr "" #: bin/list_members:202 msgid "Bad --digest option: %(kind)s" msgstr "" #: bin/list_members:224 msgid "Could not open file for writing:" msgstr "" #: bin/list_owners:20 msgid "" "List the owners of a mailing list, or all mailing lists.\n" "\n" "Usage: %(PROGRAM)s [options] [listname ...]\n" "Options:\n" "\n" " -w / --with-listnames\n" " Group the owners by list names and include the list names in the\n" " output. Otherwise, the owners will be sorted and uniquified based " "on\n" " the email address.\n" "\n" " -m / --moderators\n" " Include the list moderators in the output.\n" "\n" " -h / --help\n" " Print this help message and exit.\n" "\n" " listname\n" " Print the owners of the specified lists. More than one can appear\n" " after the options. If there are no listnames provided, the owners " "of\n" " all the lists will be displayed.\n" msgstr "" #: bin/mailmanctl:20 msgid "" "Primary start-up and shutdown script for Mailman's qrunner daemon.\n" "\n" "This script starts, stops, and restarts the main Mailman queue runners, " "making\n" "sure that the various long-running qrunners are still alive and kicking. " "It\n" "does this by forking and exec'ing the qrunners and waiting on their pids.\n" "When it detects a subprocess has exited, it may restart it.\n" "\n" "The qrunners respond to SIGINT, SIGTERM, and SIGHUP. SIGINT and SIGTERM " "both\n" "cause the qrunners to exit cleanly, but the master will only restart " "qrunners\n" "that have exited due to a SIGINT. SIGHUP causes the master and the " "qrunners\n" "to close their log files, and reopen then upon the next printed message.\n" "\n" "The master also responds to SIGINT, SIGTERM, and SIGHUP, which it simply\n" "passes on to the qrunners (note that the master will close and reopen its " "own\n" "log files on receipt of a SIGHUP). The master also leaves its own process " "id\n" "in the file data/master-qrunner.pid but you normally don't need to use this\n" "pid directly. The `start', `stop', `restart', and `reopen' commands handle\n" "everything for you.\n" "\n" "Usage: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n" "\n" "Options:\n" "\n" " -n/--no-restart\n" " Don't restart the qrunners when they exit because of an error or a\n" " SIGINT. They are never restarted if they exit in response to a\n" " SIGTERM. Use this only for debugging. Only useful if the `start'\n" " command is given.\n" "\n" " -u/--run-as-user\n" " Normally, this script will refuse to run if the user id and group " "id\n" " are not set to the `mailman' user and group (as defined when you\n" " configured Mailman). If run as root, this script will change to " "this\n" " user and group before the check is made.\n" "\n" " This can be inconvenient for testing and debugging purposes, so the -" "u\n" " flag means that the step that sets and checks the uid/gid is " "skipped,\n" " and the program is run as the current user and group. This flag is\n" " not recommended for normal production environments.\n" "\n" " Note though, that if you run with -u and are not in the mailman " "group,\n" " you may have permission problems, such as begin unable to delete a\n" " list's archives through the web. Tough luck!\n" "\n" " -s/--stale-lock-cleanup\n" " If mailmanctl finds an existing master lock, it will normally exit\n" " with an error message. With this option, mailmanctl will perform " "an\n" " extra level of checking. If a process matching the host/pid " "described\n" " in the lock file is running, mailmanctl will still exit, but if no\n" " matching process is found, mailmanctl will remove the apparently " "stale\n" " lock and make another attempt to claim the master lock.\n" "\n" " -q/--quiet\n" " Don't print status messages. Error messages are still printed to\n" " standard error.\n" "\n" " -h/--help\n" " Print this message and exit.\n" "\n" "Commands:\n" "\n" " start - Start the master daemon and all qrunners. Prints a message " "and\n" " exits if the master daemon is already running.\n" "\n" " stop - Stops the master daemon and all qrunners. After stopping, no\n" " more messages will be processed.\n" "\n" " restart - Restarts the qrunners, but not the master process. Use this\n" " whenever you upgrade or update Mailman so that the qrunners " "will\n" " use the newly installed code.\n" "\n" " reopen - This will close all log files, causing them to be re-opened " "the\n" " next time a message is written to them\n" msgstr "" #: bin/mailmanctl:152 msgid "PID unreadable in: %(pidfile)s" msgstr "" #: bin/mailmanctl:154 msgid "Is qrunner even running?" msgstr "" #: bin/mailmanctl:160 msgid "No child with pid: %(pid)s" msgstr "" #: bin/mailmanctl:162 msgid "Stale pid file removed." msgstr "" #: bin/mailmanctl:220 msgid "" "The master qrunner lock could not be acquired because it appears as if " "another\n" "master qrunner is already running.\n" msgstr "" #: bin/mailmanctl:226 msgid "" "The master qrunner lock could not be acquired. It appears as though there " "is\n" "a stale master qrunner lock. Try re-running mailmanctl with the -s flag.\n" msgstr "" #: bin/mailmanctl:232 msgid "" "The master qrunner lock could not be acquired, because it appears as if " "some\n" "process on some other host may have acquired it. We can't test for stale\n" "locks across host boundaries, so you'll have to do this manually. Or, if " "you\n" "know the lock is stale, re-run mailmanctl with the -s flag.\n" "\n" "Lock file: %(LOCKFILE)s\n" "Lock host: %(status)s\n" "\n" "Exiting." msgstr "" #: bin/mailmanctl:279 cron/mailpasswds:119 msgid "Site list is missing: %(sitelistname)s" msgstr "" #: bin/mailmanctl:304 msgid "Run this program as root or as the %(name)s user, or use -u." msgstr "" #: bin/mailmanctl:335 msgid "No command given." msgstr "" #: bin/mailmanctl:338 msgid "Bad command: %(command)s" msgstr "" #: bin/mailmanctl:343 msgid "Warning! You may encounter permission problems." msgstr "" #: bin/mailmanctl:352 msgid "Shutting down Mailman's master qrunner" msgstr "" #: bin/mailmanctl:359 msgid "Restarting Mailman's master qrunner" msgstr "" #: bin/mailmanctl:363 msgid "Re-opening all log files" msgstr "" #: bin/mailmanctl:399 msgid "Starting Mailman's master qrunner." msgstr "" #: bin/mmsitepass:19 msgid "" "Set the site password, prompting from the terminal.\n" "\n" "The site password can be used in most if not all places that the list\n" "administrator's password can be used, which in turn can be used in most " "places\n" "that a list users password can be used.\n" "\n" "Usage: %(PROGRAM)s [options] [password]\n" "\n" "Options:\n" "\n" " -c/--listcreator\n" " Set the list creator password instead of the site password. The " "list\n" " creator is authorized to create and remove lists, but does not have\n" " the total power of the site administrator.\n" "\n" " -h/--help\n" " Print this help message and exit.\n" "\n" "If password is not given on the command line, it will be prompted for.\n" msgstr "" #: bin/mmsitepass:73 msgid "site" msgstr "" #: bin/mmsitepass:80 msgid "list creator" msgstr "" #: bin/mmsitepass:86 msgid "New %(pwdesc)s password: " msgstr "" #: bin/mmsitepass:87 msgid "Again to confirm password: " msgstr "" #: bin/mmsitepass:89 msgid "Passwords do not match; no changes made." msgstr "" #: bin/mmsitepass:92 msgid "Interrupted..." msgstr "" #: bin/mmsitepass:98 msgid "Password changed." msgstr "" #: bin/mmsitepass:100 msgid "Password change failed." msgstr "" #: bin/msgfmt.py:5 msgid "" "Generate binary message catalog from textual translation description.\n" "\n" "This program converts a textual Uniforum-style message catalog (.po file) " "into\n" "a binary GNU catalog (.mo file). This is essentially the same function as " "the\n" "GNU msgfmt program, however, it is a simpler implementation.\n" "\n" "Usage: msgfmt.py [OPTIONS] filename.po\n" "\n" "Options:\n" " -o file\n" " --output-file=file\n" " Specify the output file to write to. If omitted, output will go to " "a\n" " file named filename.mo (based off the input file name).\n" "\n" " -h\n" " --help\n" " Print this message and exit.\n" "\n" " -V\n" " --version\n" " Display version information and exit.\n" msgstr "" #: bin/msgfmt.py:49 msgid "Add a non-fuzzy translation to the dictionary." msgstr "" #: bin/msgfmt.py:57 msgid "Return the generated output." msgstr "" #: bin/newlist:19 msgid "" "Create a new, unpopulated mailing list.\n" "\n" "Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n" "\n" "Options:\n" "\n" " -l language\n" " --language=language\n" " Make the list's preferred language `language', which must be a two\n" " letter language code.\n" "\n" " -u urlhost\n" " --urlhost=urlhost\n" " Gives the list's web interface host name.\n" "\n" " -e emailhost\n" " --emailhost=emailhost\n" " Gives the list's email domain name.\n" "\n" " -q/--quiet\n" " Normally the administrator is notified by email (after a prompt) " "that\n" " their list has been created. This option suppresses the prompt and\n" " notification.\n" "\n" " -h/--help\n" " Print this help text and exit.\n" "\n" "You can specify as many of the arguments as you want on the command line:\n" "you will be prompted for the missing ones.\n" "\n" "Every Mailman list has two parameters which define the default host name " "for\n" "outgoing email, and the default URL for all web interfaces. When you\n" "configured Mailman, certain defaults were calculated, but if you are " "running\n" "multiple virtual Mailman sites, then the defaults may not be appropriate " "for\n" "the list you are creating.\n" "\n" "You also specify the domain to create your new list in by typing the " "command\n" "like so:\n" "\n" " newlist --urlhost=www.mydom.ain mylist\n" "\n" "where `www.mydom.ain' should be the base hostname for the URL to this " "virtual\n" "hosts's lists. E.g. with this setting people will view the general list\n" "overviews at http://www.mydom.ain/mailman/listinfo. Also, www.mydom.ain\n" "should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if\n" "the email hostname to be automatically determined.\n" "\n" "If you want the email hostname to be different from the one looked up by " "the\n" "VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can " "specify\n" "`emailhost' like so:\n" "\n" " newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n" "\n" "where `mydom.ain' is the mail domain name. If you don't specify emailhost " "but\n" "urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST " "will\n" "be used for the email interface.\n" "\n" "For backward compatibility, you can also specify the domain to create your\n" "new list in by spelling the listname like so:\n" "\n" " mylist@www.mydom.ain\n" "\n" "where www.mydom.ain is used for `urlhost' but it will also be used for\n" "`emailhost' if it is not found in the virtual host table. Note that\n" "'--urlhost' and '--emailhost' have precedence to this notation.\n" "\n" "If you spell the list name as just `mylist', then the email hostname will " "be\n" "taken from DEFAULT_EMAIL_HOST and the url will be taken from DEFAULT_URL " "(as\n" "defined in your Defaults.py file or overridden by settings in mm_cfg.py).\n" "\n" "Note that listnames are forced to lowercase.\n" msgstr "" #: bin/newlist:150 msgid "Unknown language: %(lang)s" msgstr "" #: bin/newlist:155 msgid "Enter the name of the list: " msgstr "" #: bin/newlist:176 msgid "Enter the email of the person running the list: " msgstr "" #: bin/newlist:181 msgid "Initial %(listname)s password: " msgstr "" #: bin/newlist:185 msgid "The list password cannot be empty" msgstr "" #: bin/newlist:229 msgid "Hit enter to notify %(listname)s owner..." msgstr "" #: bin/qrunner:20 msgid "" "Run one or more qrunners, once or repeatedly.\n" "\n" "Each named runner class is run in round-robin fashion. In other words, the\n" "first named runner is run to consume all the files currently in its\n" "directory. When that qrunner is done, the next one is run to consume all " "the\n" "files in /its/ directory, and so on. The number of total iterations can be\n" "given on the command line.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" "\n" " -r runner[:slice:range]\n" " --runner=runner[:slice:range]\n" " Run the named qrunner, which must be one of the strings returned by\n" " the -l option. Optional slice:range if given, is used to assign\n" " multiple qrunner processes to a queue. range is the total number " "of\n" " qrunners for this queue while slice is the number of this qrunner " "from\n" " [0..range).\n" "\n" " If using the slice:range form, you better make sure that each " "qrunner\n" " for the queue is given the same range value. If slice:runner is " "not\n" " given, then 1:1 is used.\n" "\n" " Multiple -r options may be given, in which case each qrunner will " "run\n" " once in round-robin fashion. The special runner `All' is shorthand\n" " for a qrunner for each listed by the -l option.\n" "\n" " --once\n" " -o\n" " Run each named qrunner exactly once through its main loop. " "Otherwise,\n" " each qrunner runs indefinitely, until the process receives a " "SIGTERM\n" " or SIGINT.\n" "\n" " -l/--list\n" " Shows the available qrunner names and exit.\n" "\n" " -v/--verbose\n" " Spit out more debugging information to the logs/qrunner log file.\n" "\n" " -s/--subproc\n" " This should only be used when running qrunner as a subprocess of " "the\n" " mailmanctl startup script. It changes some of the exit-on-error\n" " behavior to work better with that framework.\n" "\n" " -h/--help\n" " Print this message and exit.\n" "\n" "runner is required unless -l or -h is given, and it must be one of the " "names\n" "displayed by the -l switch.\n" "\n" "Note also that this script should be started up from mailmanctl as a normal\n" "operation. It is only useful for debugging if it is run separately.\n" msgstr "" #: bin/qrunner:178 msgid "%(name)s runs the %(runnername)s qrunner" msgstr "" #: bin/qrunner:179 msgid "All runs all the above qrunners" msgstr "" #: bin/qrunner:215 msgid "No runner name given." msgstr "" #: bin/rb-archfix:21 msgid "" "Reduce disk space usage for Pipermail archives.\n" "\n" "Usage: %(PROGRAM)s [options] file ...\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" "Only use this to 'fix' archive -article database files that have been " "written\n" "with Mailman 2.1.3 or earlier and have html_body attributes in them. These\n" "attributes can cause huge amounts of memory bloat and impact performance " "for\n" "high activity lists, particularly those where large text postings are made " "to\n" "them.\n" "\n" "Example:\n" "\n" "%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n" "\n" "You should run `bin/check_perms -f' after running this script.\n" "\n" "You will probably want to delete the -article.bak files created by this " "script\n" "when you are satisfied with the results.\n" "\n" "This script is provided for convenience purposes only. It isn't supported.\n" msgstr "" #: bin/remove_members:20 msgid "" "Remove members from a list.\n" "\n" "Usage:\n" " remove_members [options] [listname] [addr1 ...]\n" "\n" "Options:\n" "\n" " --file=file\n" " -f file\n" " Remove member addresses found in the given file. If file is\n" " `-', read stdin.\n" "\n" " --all\n" " -a\n" " Remove all members of the mailing list.\n" " (mutually exclusive with --fromall)\n" "\n" " --fromall\n" " Removes the given addresses from all the lists on this system\n" " regardless of virtual domains if you have any. This option cannot " "be\n" " used -a/--all. Also, you should not specify a listname when using\n" " this option.\n" "\n" " --nouserack\n" " -n\n" " Don't send the user acknowledgements. If not specified, the list\n" " default value is used.\n" "\n" " --noadminack\n" " -N\n" " Don't send the admin acknowledgements. If not specified, the list\n" " default value is used.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname is the name of the mailing list to use.\n" "\n" " addr1 ... are additional addresses to remove.\n" msgstr "" #: bin/remove_members:156 msgid "Could not open file for reading: %(filename)s." msgstr "" #: bin/remove_members:163 msgid "Error opening list %(listname)s... skipping." msgstr "" #: bin/remove_members:173 msgid "No such member: %(addr)s" msgstr "" #: bin/remove_members:178 msgid "User `%(addr)s' removed from list: %(listname)s." msgstr "" #: bin/reset_pw.py:21 msgid "" "Reset the passwords for members of a mailing list.\n" "\n" "This script resets all the passwords of a mailing list's members. It can " "also\n" "be used to reset the lists of all members of all mailing lists, but it is " "your\n" "responsibility to let the users know that their passwords have been " "changed.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r reset_pw listname [options]\n" "\n" "Options:\n" " -v / --verbose\n" " Print what the script is doing.\n" msgstr "" #: bin/reset_pw.py:77 msgid "Changing passwords for list: %(listname)s" msgstr "" #: bin/reset_pw.py:83 msgid "New password for member %(member)40s: %(randompw)s" msgstr "" #: bin/rmlist:19 msgid "" "Remove the components of a mailing list with impunity - beware!\n" "\n" "This removes (almost) all traces of a mailing list. By default, the lists\n" "archives are not removed, which is very handy for retiring old lists.\n" "\n" "Usage:\n" " rmlist [-a] [-h] listname\n" "\n" "Where:\n" " --archives\n" " -a\n" " Remove the list's archives too, or if the list has already been\n" " deleted, remove any residual archives.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" msgstr "" #: bin/rmlist:72 bin/rmlist:75 msgid "Removing %(msg)s" msgstr "" #: bin/rmlist:80 msgid "%(listname)s %(msg)s not found as %(filename)s" msgstr "" #: bin/rmlist:104 msgid "No such list (or list already deleted): %(listname)s" msgstr "" #: bin/rmlist:106 msgid "No such list: %(listname)s. Removing its residual archives." msgstr "" #: bin/rmlist:110 msgid "Not removing archives. Reinvoke with -a to remove them." msgstr "" #: bin/rmlist:124 msgid "list info" msgstr "" #: bin/rmlist:132 msgid "stale lock file" msgstr "" #: bin/rmlist:137 bin/rmlist:139 msgid "private archives" msgstr "" #: bin/rmlist:141 bin/rmlist:143 msgid "public archives" msgstr "" #: bin/show_qfiles:20 msgid "" "Show the contents of one or more Mailman queue files.\n" "\n" "Usage: show_qfiles [options] qfile ...\n" "\n" "Options:\n" "\n" " -q / --quiet\n" " Don't print `helpful' message delimiters.\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" "Example: show_qfiles qfiles/shunt/*.pck\n" msgstr "" #: bin/sync_members:19 msgid "" "Synchronize a mailing list's membership with a flat file.\n" "\n" "This script is useful if you have a Mailman mailing list and a sendmail\n" ":include: style list of addresses (also as is used in Majordomo). For " "every\n" "address in the file that does not appear in the mailing list, the address " "is\n" "added. For every address in the mailing list that does not appear in the\n" "file, the address is removed. Other options control what happens when an\n" "address is added or removed.\n" "\n" "Usage: %(PROGRAM)s [options] -f file listname\n" "\n" "Where `options' are:\n" "\n" " --no-change\n" " -n\n" " Don't actually make the changes. Instead, print out what would be\n" " done to the list.\n" "\n" " --welcome-msg[=]\n" " -w[=]\n" " Sets whether or not to send the newly added members a welcome\n" " message, overriding whatever the list's `send_welcome_msg' setting\n" " is. With -w=yes or -w, the welcome message is sent. With -w=no, " "no\n" " message is sent.\n" "\n" " --goodbye-msg[=]\n" " -g[=]\n" " Sets whether or not to send the goodbye message to removed members,\n" " overriding whatever the list's `send_goodbye_msg' setting is. With\n" " -g=yes or -g, the goodbye message is sent. With -g=no, no message " "is\n" " sent.\n" "\n" " --digest[=]\n" " -d[=]\n" " Selects whether to make newly added members receive messages in\n" " digests. With -d=yes or -d, they become digest members. With -" "d=no\n" " (or if no -d option given) they are added as regular members.\n" "\n" " --notifyadmin[=]\n" " -a[=]\n" " Specifies whether the admin should be notified for each " "subscription\n" " or unsubscription. If you're adding a lot of addresses, you\n" " definitely want to turn this off! With -a=yes or -a, the admin is\n" " notified. With -a=no, the admin is not notified. With no -a " "option,\n" " the default for the list is used.\n" "\n" " --file \n" " -f \n" " This option is required. It specifies the flat file to synchronize\n" " against. Email addresses must appear one per line. If filename is\n" " `-' then stdin is used.\n" "\n" " --help\n" " -h\n" " Print this message.\n" "\n" " listname\n" " Required. This specifies the list to synchronize.\n" msgstr "" #: bin/sync_members:115 msgid "Bad choice: %(yesno)s" msgstr "" #: bin/sync_members:138 msgid "Dry run mode" msgstr "" #: bin/sync_members:159 msgid "Only one -f switch allowed" msgstr "" #: bin/sync_members:163 msgid "No argument to -f given" msgstr "" #: bin/sync_members:172 msgid "Illegal option: %(opt)s" msgstr "" #: bin/sync_members:178 msgid "No listname given" msgstr "" #: bin/sync_members:182 msgid "Must have a listname and a filename" msgstr "" #: bin/sync_members:191 msgid "Cannot read address file: %(filename)s: %(msg)s" msgstr "" #: bin/sync_members:203 msgid "Ignore : %(addr)30s" msgstr "" #: bin/sync_members:212 msgid "Invalid : %(addr)30s" msgstr "" #: bin/sync_members:215 msgid "You must fix the preceding invalid addresses first." msgstr "" #: bin/sync_members:260 msgid "Added : %(s)s" msgstr "" #: bin/sync_members:280 msgid "Removed: %(s)s" msgstr "" #: bin/transcheck:19 msgid "" "\n" "Check a given Mailman translation, making sure that variables and\n" "tags referenced in translation are the same variables and tags in\n" "the original templates and catalog.\n" "\n" "Usage:\n" "\n" "cd $MAILMAN_DIR\n" "%(program)s [-q] \n" "\n" "Where is your country code (e.g. 'it' for Italy) and -q is\n" "to ask for a brief summary.\n" msgstr "" #: bin/transcheck:58 msgid "check a translation comparing with the original string" msgstr "" #: bin/transcheck:68 msgid "scan a string from the original file" msgstr "" #: bin/transcheck:78 msgid "scan a translated string" msgstr "" #: bin/transcheck:91 msgid "check for differences between checked in and checked out" msgstr "" #: bin/transcheck:124 msgid "parse a .po file extracting msgids and msgstrs" msgstr "" #: bin/transcheck:143 msgid "" "States table for the finite-states-machine parser:\n" " 0 idle\n" " 1 filename-or-comment\n" " 2 msgid\n" " 3 msgstr\n" " 4 end\n" " " msgstr "" #: bin/transcheck:280 msgid "" "check a translated template against the original one\n" " search also tags if html is not zero" msgstr "" #: bin/transcheck:327 msgid "scan the po file comparing msgids with msgstrs" msgstr "" #: bin/unshunt:20 msgid "" "Move a message from the shunt queue to the original queue.\n" "\n" "Usage: %(PROGRAM)s [options] [directory]\n" "\n" "Where:\n" "\n" " -h / --help\n" " Print help and exit.\n" "\n" "Optional `directory' specifies a directory to dequeue from other than\n" "qfiles/shunt. *** Warning *** Do not unshunt messages that weren't\n" "shunted to begin with. For example, running unshunt on qfiles/out/\n" "will result in losing all the messages in that queue.\n" msgstr "" #: bin/unshunt:85 msgid "" "Cannot unshunt message %(filebase)s, skipping:\n" "%(e)s" msgstr "" #: bin/update:19 msgid "" "Perform all necessary upgrades.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -f/--force\n" " Force running the upgrade procedures. Normally, if the version " "number\n" " of the installed Mailman matches the current version number (or a\n" " `downgrade' is detected), nothing will be done.\n" "\n" " -h/--help\n" " Print this text and exit.\n" "\n" "Use this script to help you update to the latest release of Mailman from\n" "some previous version. It knows about versions back to 1.0b4 (?).\n" msgstr "" #: bin/update:107 msgid "Fixing language templates: %(listname)s" msgstr "" #: bin/update:196 bin/update:709 msgid "WARNING: could not acquire lock for list: %(listname)s" msgstr "" #: bin/update:215 msgid "Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info" msgstr "" #: bin/update:221 msgid "Updating the held requests database." msgstr "" #: bin/update:243 msgid "" "For some reason, %(mbox_dir)s exists as a file. This won't work with\n" "b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding." msgstr "" #: bin/update:255 msgid "" "\n" "%(listname)s has both public and private mbox archives. Since this list\n" "currently uses private archiving, I'm installing the private mbox archive\n" "-- %(o_pri_mbox_file)s -- as the active archive, and renaming\n" " %(o_pub_mbox_file)s\n" "to\n" " %(o_pub_mbox_file)s.preb6\n" "\n" "You can integrate that into the archives if you want by using the 'arch'\n" "script.\n" msgstr "" #: bin/update:270 msgid "" "%s has both public and private mbox archives. Since this list\n" "currently uses public archiving, I'm installing the public mbox file\n" "archive file (%s) as the active one, and renaming\n" " %s\n" " to\n" " %s.preb6\n" "\n" "You can integrate that into the archives if you want by using the 'arch'\n" "script.\n" msgstr "" #: bin/update:287 msgid "- updating old private mbox file" msgstr "" #: bin/update:295 msgid "" " unknown file in the way, moving\n" " %(o_pri_mbox_file)s\n" " to\n" " %(newname)s" msgstr "" #: bin/update:302 bin/update:325 msgid "" " looks like you have a really recent CVS installation...\n" " you're either one brave soul, or you already ran me" msgstr "" #: bin/update:311 msgid "- updating old public mbox file" msgstr "" #: bin/update:319 msgid "" " unknown file in the way, moving\n" " %(o_pub_mbox_file)s\n" " to\n" " %(newname)s" msgstr "" #: bin/update:357 msgid "- This list looks like it might have <= b4 list templates around" msgstr "" #: bin/update:365 msgid "- moved %(o_tmpl)s to %(n_tmpl)s" msgstr "" #: bin/update:367 msgid "- both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched" msgstr "" #: bin/update:370 msgid "- %(o_tmpl)s doesn't exist, leaving untouched" msgstr "" #: bin/update:400 msgid "removing directory %(src)s and everything underneath" msgstr "" #: bin/update:403 msgid "removing %(src)s" msgstr "" #: bin/update:407 msgid "Warning: couldn't remove %(src)s -- %(rest)s" msgstr "" #: bin/update:412 msgid "couldn't remove old file %(pyc)s -- %(rest)s" msgstr "" #: bin/update:416 msgid "updating old qfiles" msgstr "" #: bin/update:459 msgid "Warning! Not a directory: %(dirpath)s" msgstr "" #: bin/update:528 msgid "message is unparsable: %(filebase)s" msgstr "" #: bin/update:542 msgid "Warning! Deleting empty .pck file: %(pckfile)s" msgstr "" #: bin/update:561 msgid "Updating Mailman 2.0 pending_subscriptions.db database" msgstr "" #: bin/update:572 msgid "Updating Mailman 2.1.4 pending.pck database" msgstr "" #: bin/update:596 msgid "Ignoring bad pended data: %(key)s: %(val)s" msgstr "" #: bin/update:612 msgid "WARNING: Ignoring duplicate pending ID: %(id)s." msgstr "" #: bin/update:665 msgid "getting rid of old source files" msgstr "" #: bin/update:675 msgid "no lists == nothing to do, exiting" msgstr "" #: bin/update:682 msgid "" "fixing all the perms on your old html archives to work with b6\n" "If your archives are big, this could take a minute or two..." msgstr "" #: bin/update:687 msgid "done" msgstr "" #: bin/update:689 msgid "Updating mailing list: %(listname)s" msgstr "" #: bin/update:692 msgid "Updating Usenet watermarks" msgstr "" #: bin/update:697 msgid "- nothing to update here" msgstr "" #: bin/update:720 msgid "- usenet watermarks updated and gate_watermarks removed" msgstr "" #: bin/update:734 msgid "" "\n" "\n" "NOTE NOTE NOTE NOTE NOTE\n" "\n" " You are upgrading an existing Mailman installation, but I can't tell " "what\n" " version you were previously running.\n" "\n" " If you are upgrading from Mailman 1.0b9 or earlier you will need to\n" " manually update your mailing lists. For each mailing list you need to\n" " copy the file templates/options.html lists//options.html.\n" "\n" " However, if you have edited this file via the Web interface, you will " "have\n" " to merge your changes into this file, otherwise you will lose your\n" " changes.\n" "\n" "NOTE NOTE NOTE NOTE NOTE\n" "\n" msgstr "" #: bin/update:791 msgid "No updates are necessary." msgstr "" #: bin/update:794 msgid "" "Downgrade detected, from version %(hexlversion)s to version %(hextversion)s\n" "This is probably not safe.\n" "Exiting." msgstr "" #: bin/update:799 msgid "Upgrading from version %(hexlversion)s to %(hextversion)s" msgstr "" #: bin/update:808 msgid "" "\n" "ERROR:\n" "\n" "The locks for some lists could not be acquired. This means that either\n" "Mailman was still active when you upgraded, or there were stale locks in " "the\n" "%(lockdir)s directory.\n" "\n" "You must put Mailman into a quiescent state and remove all stale locks, " "then\n" "re-run \"make update\" manually. See the INSTALL and UPGRADE files for " "details.\n" msgstr "" #: bin/version:19 msgid "Print the Mailman version.\n" msgstr "" #: bin/version:26 msgid "Using Mailman version:" msgstr "" #: bin/withlist:20 msgid "" "General framework for interacting with a mailing list object.\n" "\n" "There are two ways to use this script: interactively or programmatically.\n" "Using it interactively allows you to play with, examine and modify a " "MailList\n" "object from Python's interactive interpreter. When running interactively, " "a\n" "MailList object called `m' will be available in the global namespace. It " "also\n" "loads the class MailList into the global namespace.\n" "\n" "Programmatically, you can write a function to operate on a MailList object,\n" "and this script will take care of the housekeeping (see below for " "examples).\n" "In that case, the general usage syntax is:\n" "\n" "%% bin/withlist [options] listname [args ...]\n" "\n" "Options:\n" "\n" " -l / --lock\n" " Lock the list when opening. Normally the list is opened unlocked\n" " (e.g. for read-only operations). You can always lock the file " "after\n" " the fact by typing `m.Lock()'\n" "\n" " Note that if you use this option, you should explicitly call m.Save" "()\n" " before exiting, since the interpreter's clean up procedure will not\n" " automatically save changes to the MailList object (but it will " "unlock\n" " the list).\n" "\n" " -i / --interactive\n" " Leaves you at an interactive prompt after all other processing is\n" " complete. This is the default unless the -r option is given.\n" "\n" " --run [module.]callable\n" " -r [module.]callable\n" " This can be used to run a script with the opened MailList object.\n" " This works by attempting to import `module' (which must be in the\n" " directory containing withlist, or already be accessible on your\n" " sys.path), and then calling `callable' from the module. callable " "can\n" " be a class or function; it is called with the MailList object as " "the\n" " first argument. If additional args are given on the command line,\n" " they are passed as subsequent positional args to the callable.\n" "\n" " Note that `module.' is optional; if it is omitted then a module " "with\n" " the name `callable' will be imported.\n" "\n" " The global variable `r' will be set to the results of this call.\n" "\n" " --all / -a\n" " This option only works with the -r option. Use this if you want to\n" " execute the script on all mailing lists. When you use -a you " "should\n" " not include a listname argument on the command line. The variable " "`r'\n" " will be a list of all the results.\n" "\n" " --quiet / -q\n" " Suppress all status messages.\n" "\n" " --help / -h\n" " Print this message and exit\n" "\n" "\n" "Here's an example of how to use the -r option. Say you have a file in the\n" "Mailman installation directory called `listaddr.py', with the following\n" "two functions:\n" "\n" "def listaddr(mlist):\n" " print mlist.GetListEmail()\n" "\n" "def requestaddr(mlist):\n" " print mlist.GetRequestEmail()\n" "\n" "Now, from the command line you can print the list's posting address by " "running\n" "the following from the command line:\n" "\n" "%% bin/withlist -r listaddr mylist\n" "Loading list: mylist (unlocked)\n" "Importing listaddr ...\n" "Running listaddr.listaddr() ...\n" "mylist@myhost.com\n" "\n" "And you can print the list's request address by running:\n" "\n" "%% bin/withlist -r listaddr.requestaddr mylist\n" "Loading list: mylist (unlocked)\n" "Importing listaddr ...\n" "Running listaddr.requestaddr() ...\n" "mylist-request@myhost.com\n" "\n" "As another example, say you wanted to change the password for a particular\n" "user on a particular list. You could put the following function in a file\n" "called `changepw.py':\n" "\n" "from Mailman.Errors import NotAMemberError\n" "\n" "def changepw(mlist, addr, newpasswd):\n" " try:\n" " mlist.setMemberPassword(addr, newpasswd)\n" " mlist.Save()\n" " except NotAMemberError:\n" " print 'No address matched:', addr\n" "\n" "and run this from the command line:\n" " %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n" msgstr "" #: bin/withlist:164 msgid "" "Unlock a locked list, but do not implicitly Save() it.\n" "\n" " This does not get run if the interpreter exits because of a signal, or " "if\n" " os._exit() is called. It will get called if an exception occurs " "though.\n" " " msgstr "" #: bin/withlist:175 msgid "Unlocking (but not saving) list: %(listname)s" msgstr "" #: bin/withlist:179 msgid "Finalizing" msgstr "" #: bin/withlist:188 msgid "Loading list %(listname)s" msgstr "" #: bin/withlist:190 msgid "(locked)" msgstr "" #: bin/withlist:192 msgid "(unlocked)" msgstr "" #: bin/withlist:197 msgid "Unknown list: %(listname)s" msgstr "" #: bin/withlist:237 msgid "No list name supplied." msgstr "" #: bin/withlist:246 msgid "--all requires --run" msgstr "" #: bin/withlist:266 msgid "Importing %(module)s..." msgstr "" #: bin/withlist:270 msgid "Running %(module)s.%(callable)s()..." msgstr "" #: bin/withlist:291 msgid "The variable `m' is the %(listname)s MailList instance" msgstr "" #: cron/bumpdigests:19 msgid "" "Increment the digest volume number and reset the digest number to one.\n" "\n" "Usage: %(PROGRAM)s [options] [listname ...]\n" "\n" "Options:\n" "\n" " --help/-h\n" " Print this message and exit.\n" "\n" "The lists named on the command line are bumped. If no list names are " "given,\n" "all lists are bumped.\n" msgstr "" #: cron/checkdbs:19 msgid "" "Check for pending admin requests and mail the list owners if necessary.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: cron/checkdbs:107 msgid "" "Notice: %(discarded)d old request(s) automatically expired.\n" "\n" msgstr "" #: cron/checkdbs:120 msgid "%(count)d %(realname)s moderator request(s) waiting" msgstr "" #: cron/checkdbs:123 msgid "%(realname)s moderator request check result" msgstr "" #: cron/checkdbs:143 msgid "Pending subscriptions:" msgstr "" #: cron/checkdbs:154 msgid "" "\n" "Pending posts:" msgstr "" #: cron/checkdbs:161 msgid "" "From: %(sender)s on %(date)s\n" "Subject: %(subject)s\n" "Cause: %(reason)s" msgstr "" #: cron/cull_bad_shunt:20 msgid "" "Cull bad and shunt queues, recommended once per day.\n" "\n" "This script goes through the 'bad' and 'shunt' queue directories and,\n" "if mm_cfg.BAD_SHUNT_STALE_AFTER is > 0, it removes all files more than\n" "that many seconds old.\n" "\n" "If mm_cfg.BAD_SHUNT_ARCHIVE_DIRECTORY is a writable directory, the old\n" "files are moved there. Otherwise they are deleted.\n" "\n" "Only regular files immediately subordinate to the 'bad' and 'shunt'\n" "directories are processed. Anything else is skipped.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" msgstr "" #: cron/disabled:20 msgid "" "Process disabled members, recommended once per day.\n" "\n" "This script cruises through every mailing list looking for members whose\n" "delivery is disabled. If they have been disabled due to bounces, they will\n" "receive another notification, or they may be removed if they've received " "the\n" "maximum number of notifications.\n" "\n" "Use the --byadmin, --byuser, and --unknown flags to also send notifications " "to\n" "members whose accounts have been disabled for those reasons. Use --all to\n" "send the notification to all disabled members.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" "\n" " -o / --byadmin\n" " Also send notifications to any member disabled by the list\n" " owner/administrator.\n" "\n" " -m / --byuser\n" " Also send notifications to any member disabled by themselves.\n" "\n" " -u / --unknown\n" " Also send notifications to any member disabled for unknown reasons\n" " (usually a legacy disabled address).\n" "\n" " -b / --notbybounce\n" " Don't send notifications to members disabled because of bounces " "(the\n" " default is to notify bounce disabled members).\n" "\n" " -a / --all\n" " Send notifications to all disabled members.\n" "\n" " -f / --force\n" " Send notifications to disabled members even if they're not due a " "new\n" " notification yet.\n" "\n" " -l listname\n" " --listname=listname\n" " Process only the given list, otherwise do all lists.\n" msgstr "" #: cron/disabled:145 msgid "[disabled by periodic sweep and cull, no message available]" msgstr "" #: cron/gate_news:19 msgid "" "Poll the NNTP servers for messages to be gatewayed to mailing lists.\n" "\n" "Usage: gate_news [options]\n" "\n" "Where options are\n" "\n" " --help\n" " -h\n" " Print this text and exit.\n" "\n" msgstr "" #: cron/mailpasswds:19 msgid "" "Send password reminders for all lists to all users.\n" "\n" "This program scans all mailing lists and collects users and their " "passwords,\n" "grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true. " "Then\n" "one email message is sent to each unique user (per-virtual host) containing\n" "the list passwords and options url for the user. The password reminder " "comes\n" "from the mm_cfg.MAILMAN_SITE_LIST, which must exist.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -l listname\n" " --listname=listname\n" " Send password reminders for the named list only. If omitted,\n" " reminders are sent for all lists. Multiple -l/--listname options " "are\n" " allowed.\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: cron/mailpasswds:216 msgid "Password // URL" msgstr "" #: cron/mailpasswds:222 msgid "%(host)s mailing list memberships reminder" msgstr "" #: cron/nightly_gzip:19 msgid "" "Re-generate the Pipermail gzip'd archive flat files.\n" "\n" "This script should be run nightly from cron. When run from the command " "line,\n" "the following usage is understood:\n" "\n" "Usage: %(program)s [-v] [-h] [listnames]\n" "\n" "Where:\n" " --verbose\n" " -v\n" " print each file as it's being gzip'd\n" "\n" " --help\n" " -h\n" " print this message and exit\n" "\n" " listnames\n" " Optionally, only compress the .txt files for the named lists. " "Without \n" " this, all archivable lists are processed.\n" "\n" msgstr "" #: cron/senddigests:20 msgid "" "Dispatch digests for lists w/pending messages and digest_send_periodic set.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" "\n" " -l listname\n" " --listname=listname\n" " Send the digest for the given list only, otherwise the digests for " "all\n" " lists are sent out.\n" msgstr "" #~ msgid "" #~ "\n" #~ " who\n" #~ " See everyone who is on this mailing list.\n" #~ msgstr "" #~ "\n" #~ " who\n" #~ " Bekijk alle op deze maillijst aanwezige leden.\n"