# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR ORGANIZATION # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: Fri Jun 26 17:05:40 2020\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: ENCODING\n" "Generated-By: pygettext.py 1.4\n" #: Mailman/Archiver/HyperArch.py:124 msgid "size not available" msgstr "" #: Mailman/Archiver/HyperArch.py:130 msgid " %(size)i bytes " msgstr "" #: Mailman/Archiver/HyperArch.py:276 Mailman/Archiver/pipermail.py:185 #: Mailman/Archiver/pipermail.py:186 msgid "No subject" msgstr "" #: Mailman/Archiver/HyperArch.py:292 Mailman/Archiver/HyperArch.py:295 #: Mailman/Archiver/HyperArch.py:426 Mailman/Archiver/HyperArch.py:484 #: Mailman/Archiver/HyperArch.py:593 Mailman/Archiver/HyperArch.py:1067 #: Mailman/Archiver/HyperArch.py:1196 msgid " at " msgstr "" #: Mailman/Archiver/HyperArch.py:513 msgid "Previous message (by thread):" msgstr "" #: Mailman/Archiver/HyperArch.py:535 msgid "Next message (by thread):" msgstr "" #: Mailman/Archiver/HyperArch.py:708 Mailman/Archiver/HyperArch.py:744 msgid "thread" msgstr "" #: Mailman/Archiver/HyperArch.py:709 Mailman/Archiver/HyperArch.py:745 msgid "subject" msgstr "" #: Mailman/Archiver/HyperArch.py:710 Mailman/Archiver/HyperArch.py:746 msgid "author" msgstr "" #: Mailman/Archiver/HyperArch.py:711 Mailman/Archiver/HyperArch.py:747 msgid "date" msgstr "" #: Mailman/Archiver/HyperArch.py:783 msgid "

Currently, there are no archives.

" msgstr "" #: Mailman/Archiver/HyperArch.py:821 msgid "Gzip'd Text%(sz)s" msgstr "" #: Mailman/Archiver/HyperArch.py:826 msgid "Text%(sz)s" msgstr "" #: Mailman/Archiver/HyperArch.py:916 msgid "" "figuring article archives\n" msgstr "" #: Mailman/Archiver/HyperArch.py:926 msgid "April" msgstr "" #: Mailman/Archiver/HyperArch.py:926 msgid "February" msgstr "" #: Mailman/Archiver/HyperArch.py:926 msgid "January" msgstr "" #: Mailman/Archiver/HyperArch.py:926 msgid "March" msgstr "" #: Mailman/Archiver/HyperArch.py:927 msgid "August" msgstr "" #: Mailman/Archiver/HyperArch.py:927 msgid "July" msgstr "" #: Mailman/Archiver/HyperArch.py:927 msgid "June" msgstr "" #: Mailman/Archiver/HyperArch.py:927 Mailman/i18n.py:137 msgid "May" msgstr "" #: Mailman/Archiver/HyperArch.py:928 msgid "December" msgstr "" #: Mailman/Archiver/HyperArch.py:928 msgid "November" msgstr "" #: Mailman/Archiver/HyperArch.py:928 msgid "October" msgstr "" #: Mailman/Archiver/HyperArch.py:928 msgid "September" msgstr "" #: Mailman/Archiver/HyperArch.py:936 msgid "First" msgstr "" #: Mailman/Archiver/HyperArch.py:936 msgid "Fourth" msgstr "" #: Mailman/Archiver/HyperArch.py:936 msgid "Second" msgstr "" #: Mailman/Archiver/HyperArch.py:936 msgid "Third" msgstr "" #: Mailman/Archiver/HyperArch.py:938 msgid "%(ord)s quarter %(year)i" msgstr "" #: Mailman/Archiver/HyperArch.py:945 msgid "%(month)s %(year)i" msgstr "" #: Mailman/Archiver/HyperArch.py:950 msgid "The Week Of Monday %(day)i %(month)s %(year)i" msgstr "" #: Mailman/Archiver/HyperArch.py:954 msgid "%(day)i %(month)s %(year)i" msgstr "" #: Mailman/Archiver/HyperArch.py:1054 msgid "" "Computing threaded index\n" msgstr "" #: Mailman/Archiver/HyperArch.py:1319 msgid "Updating HTML for article %(seq)s" msgstr "" #: Mailman/Archiver/HyperArch.py:1326 msgid "article file %(filename)s is missing!" msgstr "" #: Mailman/Archiver/pipermail.py:302 msgid "Creating archive directory " msgstr "" #: Mailman/Archiver/pipermail.py:314 msgid "Reloading pickled archive state" msgstr "" #: Mailman/Archiver/pipermail.py:341 msgid "Pickling archive state into " msgstr "" #: Mailman/Archiver/pipermail.py:453 msgid "Updating index files for archive [%(archive)s]" msgstr "" #: Mailman/Archiver/pipermail.py:486 msgid " Thread" msgstr "" #: Mailman/Archiver/pipermail.py:597 msgid "#%(counter)05d %(msgid)s" msgstr "" #: Mailman/Bouncer.py:46 msgid "due to excessive bounces" msgstr "" #: Mailman/Bouncer.py:47 msgid "by yourself" msgstr "" #: Mailman/Bouncer.py:48 msgid "by the list administrator" msgstr "" #: Mailman/Bouncer.py:49 Mailman/Bouncer.py:297 #: Mailman/Commands/cmd_set.py:182 msgid "for unknown reasons" msgstr "" #: Mailman/Bouncer.py:199 msgid "bounce score incremented" msgstr "" #: Mailman/Bouncer.py:229 msgid "disabled" msgstr "" #: Mailman/Bouncer.py:246 msgid "Bounce action notification" msgstr "" #: Mailman/Bouncer.py:271 msgid "disabled address" msgstr "" #: Mailman/Bouncer.py:304 msgid " The last bounce received from you was dated %(date)s" msgstr "" #: Mailman/Bouncer.py:333 Mailman/Deliverer.py:146 #: Mailman/Handlers/Acknowledge.py:44 Mailman/Handlers/CookHeaders.py:441 #: Mailman/Handlers/Hold.py:215 Mailman/Handlers/ToDigest.py:250 #: Mailman/ListAdmin.py:225 msgid "(no subject)" msgstr "" #: Mailman/Bouncer.py:337 msgid "[No bounce details are available]" msgstr "" #: Mailman/Cgi/Auth.py:48 msgid "Moderator" msgstr "" #: Mailman/Cgi/Auth.py:50 msgid "Administrator" msgstr "" #: Mailman/Cgi/admin.py:82 Mailman/Cgi/admindb.py:121 #: Mailman/Cgi/confirm.py:62 Mailman/Cgi/edithtml.py:86 #: Mailman/Cgi/listinfo.py:55 Mailman/Cgi/options.py:101 #: Mailman/Cgi/private.py:108 Mailman/Cgi/rmlist.py:75 #: Mailman/Cgi/roster.py:59 Mailman/Cgi/subscribe.py:67 msgid "No such list %(safelistname)s" msgstr "" #: Mailman/Cgi/admin.py:97 Mailman/Cgi/admindb.py:136 #: Mailman/Cgi/confirm.py:80 Mailman/Cgi/confirm.py:334 #: Mailman/Cgi/create.py:50 Mailman/Cgi/edithtml.py:103 #: Mailman/Cgi/listinfo.py:67 Mailman/Cgi/options.py:120 #: Mailman/Cgi/private.py:125 Mailman/Cgi/rmlist.py:48 #: Mailman/Cgi/roster.py:72 Mailman/Cgi/roster.py:153 #: Mailman/Cgi/roster.py:154 Mailman/Cgi/subscribe.py:55 #: Mailman/Cgi/subscribe.py:66 Mailman/Cgi/subscribe.py:81 msgid "Error" msgstr "" #: Mailman/Cgi/admin.py:98 Mailman/Cgi/admindb.py:137 #: Mailman/Cgi/confirm.py:81 Mailman/Cgi/create.py:51 #: Mailman/Cgi/edithtml.py:104 Mailman/Cgi/listinfo.py:68 #: Mailman/Cgi/options.py:84 Mailman/Cgi/options.py:121 #: Mailman/Cgi/private.py:126 Mailman/Cgi/rmlist.py:49 #: Mailman/Cgi/roster.py:73 Mailman/Cgi/subscribe.py:82 msgid "Invalid options to CGI script." msgstr "" #: Mailman/Cgi/admin.py:123 Mailman/Cgi/admindb.py:161 #: Mailman/Cgi/edithtml.py:128 Mailman/Cgi/private.py:144 msgid "Authorization failed." msgstr "" #: Mailman/Cgi/admin.py:221 Mailman/Cgi/admindb.py:243 #: Mailman/Cgi/edithtml.py:184 Mailman/Cgi/options.py:334 msgid "The form lifetime has expired. (request forgery check)" msgstr "" #: Mailman/Cgi/admin.py:227 msgid "" "You have turned off delivery of both digest and\n" " non-digest messages. This is an incompatible state of\n" " affairs. You must turn on either digest delivery or\n" " non-digest delivery or your mailing list will basically be\n" " unusable." msgstr "" #: Mailman/Cgi/admin.py:231 Mailman/Cgi/admin.py:239 Mailman/Cgi/admin.py:246 #: Mailman/Cgi/admin.py:1774 Mailman/Gui/GUIBase.py:209 msgid "Warning: " msgstr "" #: Mailman/Cgi/admin.py:236 msgid "" "You have digest members, but digests are turned\n" " off. Those people will not receive mail.\n" " Affected member(s) %(dm)r." msgstr "" #: Mailman/Cgi/admin.py:243 msgid "" "You have regular list members but non-digestified mail is\n" " turned off. They will receive non-digestified mail until you\n" " fix this problem. Affected member(s) %(rm)r." msgstr "" #: Mailman/Cgi/admin.py:268 msgid "%(hostname)s mailing lists - Admin Links" msgstr "" #: Mailman/Cgi/admin.py:303 Mailman/Cgi/listinfo.py:121 msgid "Welcome!" msgstr "" #: Mailman/Cgi/admin.py:306 Mailman/Cgi/listinfo.py:124 msgid "Mailman" msgstr "" #: Mailman/Cgi/admin.py:310 msgid "" "

There currently are no publicly-advertised %(mailmanlink)s\n" " mailing lists on %(hostname)s." msgstr "" #: Mailman/Cgi/admin.py:316 msgid "" "

Below is the collection of publicly-advertised\n" " %(mailmanlink)s mailing lists on %(hostname)s. Click on a list\n" " name to visit the configuration pages for that list." msgstr "" #: Mailman/Cgi/admin.py:323 msgid "right " msgstr "" #: Mailman/Cgi/admin.py:325 msgid "" "To visit the administrators configuration page for an\n" " unadvertised list, open a URL similar to this one, but with a '/' and\n" " the %(extra)slist name appended. If you have the proper authority,\n" " you can also create a new mailing list.\n" "\n" "

General list information can be found at " msgstr "" #: Mailman/Cgi/admin.py:332 msgid "the mailing list overview page" msgstr "" #: Mailman/Cgi/admin.py:334 msgid "

(Send questions and comments to " msgstr "" #: Mailman/Cgi/admin.py:344 Mailman/Cgi/listinfo.py:156 cron/mailpasswds:216 msgid "List" msgstr "" #: Mailman/Cgi/admin.py:345 Mailman/Cgi/admin.py:613 #: Mailman/Cgi/listinfo.py:157 msgid "Description" msgstr "" #: Mailman/Cgi/admin.py:351 Mailman/Cgi/listinfo.py:163 bin/list_lists:130 msgid "[no description available]" msgstr "" #: Mailman/Cgi/admin.py:385 msgid "No valid variable name found." msgstr "" #: Mailman/Cgi/admin.py:395 msgid "" "%(realname)s Mailing list Configuration Help\n" "
%(varname)s Option" msgstr "" #: Mailman/Cgi/admin.py:402 msgid "Mailman %(varname)s List Option Help" msgstr "" #: Mailman/Cgi/admin.py:420 msgid "" "Warning: changing this option here\n" " could cause other screens to be out-of-sync. Be sure to reload any other\n" " pages that are displaying this option for this mailing list. You can also\n" " " msgstr "" #: Mailman/Cgi/admin.py:431 msgid "return to the %(categoryname)s options page." msgstr "" #: Mailman/Cgi/admin.py:446 msgid "%(realname)s Administration (%(label)s)" msgstr "" #: Mailman/Cgi/admin.py:447 msgid "%(realname)s mailing list administration
%(label)s Section" msgstr "" #: Mailman/Cgi/admin.py:464 msgid "Configuration Categories" msgstr "" #: Mailman/Cgi/admin.py:465 msgid "Other Administrative Activities" msgstr "" #: Mailman/Cgi/admin.py:469 msgid "Tend to pending moderator requests" msgstr "" #: Mailman/Cgi/admin.py:471 msgid "Go to the general list information page" msgstr "" #: Mailman/Cgi/admin.py:473 Mailman/Cgi/edithtml.py:203 msgid "Edit the public HTML pages and text files" msgstr "" #: Mailman/Cgi/admin.py:475 msgid "Go to list archives" msgstr "" #: Mailman/Cgi/admin.py:481 msgid "Delete this mailing list" msgstr "" #: Mailman/Cgi/admin.py:482 msgid " (requires confirmation)
 
" msgstr "" #: Mailman/Cgi/admin.py:488 Mailman/Cgi/admindb.py:258 #: Mailman/Cgi/admindb.py:340 msgid "Logout" msgstr "" #: Mailman/Cgi/admin.py:532 msgid "Emergency moderation of all list traffic is enabled" msgstr "" #: Mailman/Cgi/admin.py:543 msgid "" "Make your changes in the following section, then submit them\n" " using the Submit Your Changes button below." msgstr "" #: Mailman/Cgi/admin.py:561 msgid "Additional Member Tasks" msgstr "" #: Mailman/Cgi/admin.py:567 msgid "" "

  • Set everyone's moderation bit, including\n" " those members not currently visible" msgstr "" #: Mailman/Cgi/admin.py:571 msgid "Off" msgstr "" #: Mailman/Cgi/admin.py:571 msgid "On" msgstr "" #: Mailman/Cgi/admin.py:573 msgid "Set" msgstr "" #: Mailman/Cgi/admin.py:614 msgid "Value" msgstr "" #: Mailman/Cgi/admin.py:668 msgid "" "Badly formed options entry:\n" " %(record)s" msgstr "" #: Mailman/Cgi/admin.py:726 msgid "Enter the text below, or...
    " msgstr "" #: Mailman/Cgi/admin.py:728 msgid "
    ...specify a file to upload
    " msgstr "" #: Mailman/Cgi/admin.py:754 Mailman/Cgi/admin.py:757 msgid "Topic %(i)d" msgstr "" #: Mailman/Cgi/admin.py:758 Mailman/Cgi/admin.py:808 msgid "Delete" msgstr "" #: Mailman/Cgi/admin.py:759 msgid "Topic name:" msgstr "" #: Mailman/Cgi/admin.py:761 msgid "Regexp:" msgstr "" #: Mailman/Cgi/admin.py:764 Mailman/Cgi/options.py:1153 msgid "Description:" msgstr "" #: Mailman/Cgi/admin.py:768 Mailman/Cgi/admin.py:826 msgid "Add new item..." msgstr "" #: Mailman/Cgi/admin.py:770 Mailman/Cgi/admin.py:828 msgid "...before this one." msgstr "" #: Mailman/Cgi/admin.py:771 Mailman/Cgi/admin.py:829 msgid "...after this one." msgstr "" #: Mailman/Cgi/admin.py:804 Mailman/Cgi/admin.py:807 msgid "Spam Filter Rule %(i)d" msgstr "" #: Mailman/Cgi/admin.py:809 msgid "Spam Filter Regexp:" msgstr "" #: Mailman/Cgi/admin.py:820 Mailman/Cgi/admindb.py:398 #: Mailman/Cgi/admindb.py:462 Mailman/Cgi/admindb.py:516 #: Mailman/Cgi/admindb.py:760 msgid "Defer" msgstr "" #: Mailman/Cgi/admin.py:820 Mailman/Cgi/admindb.py:400 #: Mailman/Cgi/admindb.py:464 Mailman/Cgi/admindb.py:516 #: Mailman/Cgi/admindb.py:760 Mailman/Gui/ContentFilter.py:37 #: Mailman/Gui/Privacy.py:265 Mailman/Gui/Privacy.py:288 #: Mailman/Gui/Privacy.py:474 msgid "Reject" msgstr "" #: Mailman/Cgi/admin.py:820 Mailman/Gui/Privacy.py:265 #: Mailman/Gui/Privacy.py:474 msgid "Hold" msgstr "" #: Mailman/Cgi/admin.py:821 Mailman/Cgi/admindb.py:401 #: Mailman/Cgi/admindb.py:465 Mailman/Cgi/admindb.py:516 #: Mailman/Cgi/admindb.py:760 Mailman/Commands/cmd_confirm.py:93 #: Mailman/Gui/ContentFilter.py:37 Mailman/Gui/Privacy.py:265 #: Mailman/Gui/Privacy.py:289 Mailman/Gui/Privacy.py:474 msgid "Discard" msgstr "" #: Mailman/Cgi/admin.py:821 Mailman/Cgi/admindb.py:516 #: Mailman/Gui/Privacy.py:288 Mailman/Gui/Privacy.py:474 msgid "Accept" msgstr "" #: Mailman/Cgi/admin.py:824 Mailman/Cgi/admindb.py:764 msgid "Action:" msgstr "" #: Mailman/Cgi/admin.py:836 msgid "Move rule up" msgstr "" #: Mailman/Cgi/admin.py:837 msgid "Move rule down" msgstr "" #: Mailman/Cgi/admin.py:870 msgid "
    (Edit %(varname)s)" msgstr "" #: Mailman/Cgi/admin.py:872 msgid "
    (Details for %(varname)s)" msgstr "" #: Mailman/Cgi/admin.py:879 msgid "" "
    Note:\n" " setting this value performs an immediate action but does not modify\n" " permanent state." msgstr "" #: Mailman/Cgi/admin.py:893 msgid "Mass Subscriptions" msgstr "" #: Mailman/Cgi/admin.py:900 msgid "Mass Removals" msgstr "" #: Mailman/Cgi/admin.py:907 msgid "Address Change" msgstr "" #: Mailman/Cgi/admin.py:914 msgid "Sync Membership List" msgstr "" #: Mailman/Cgi/admin.py:921 msgid "Membership List" msgstr "" #: Mailman/Cgi/admin.py:929 msgid "(help)" msgstr "" #: Mailman/Cgi/admin.py:930 msgid "Find member %(link)s:" msgstr "" #: Mailman/Cgi/admin.py:933 msgid "Search..." msgstr "" #: Mailman/Cgi/admin.py:959 msgid "Bad regular expression: " msgstr "" #: Mailman/Cgi/admin.py:1013 msgid "%(allcnt)s members total, %(membercnt)s shown" msgstr "" #: Mailman/Cgi/admin.py:1016 msgid "%(allcnt)s members total" msgstr "" #: Mailman/Cgi/admin.py:1043 Mailman/Cgi/admin.py:1075 msgid "unsub" msgstr "" #: Mailman/Cgi/admin.py:1044 msgid "member address
    member name" msgstr "" #: Mailman/Cgi/admin.py:1045 Mailman/Cgi/admin.py:1089 msgid "mod" msgstr "" #: Mailman/Cgi/admin.py:1045 Mailman/Cgi/admin.py:1091 msgid "hide" msgstr "" #: Mailman/Cgi/admin.py:1046 msgid "nomail
    [reason]" msgstr "" #: Mailman/Cgi/admin.py:1047 msgid "not metoo" msgstr "" #: Mailman/Cgi/admin.py:1047 Mailman/Cgi/admin.py:1091 msgid "ack" msgstr "" #: Mailman/Cgi/admin.py:1048 Mailman/Cgi/admin.py:1091 msgid "nodupes" msgstr "" #: Mailman/Cgi/admin.py:1049 Mailman/Cgi/admin.py:1115 #: Mailman/Cgi/options.py:394 msgid "digest" msgstr "" #: Mailman/Cgi/admin.py:1049 Mailman/Cgi/admin.py:1130 msgid "plain" msgstr "" #: Mailman/Cgi/admin.py:1050 msgid "language" msgstr "" #: Mailman/Cgi/admin.py:1061 msgid "?" msgstr "" #: Mailman/Cgi/admin.py:1062 msgid "U" msgstr "" #: Mailman/Cgi/admin.py:1063 msgid "A" msgstr "" #: Mailman/Cgi/admin.py:1064 msgid "B" msgstr "" #: Mailman/Cgi/admin.py:1091 msgid "notmetoo" msgstr "" #: Mailman/Cgi/admin.py:1091 Mailman/Cgi/options.py:392 msgid "nomail" msgstr "" #: Mailman/Cgi/admin.py:1145 msgid "unsub -- Click on this to unsubscribe the member." msgstr "" #: Mailman/Cgi/admin.py:1147 msgid "" "mod -- The user's personal moderation flag. If this is\n" " set, postings from them will be moderated, otherwise they will be\n" " approved." msgstr "" #: Mailman/Cgi/admin.py:1151 msgid "" "hide -- Is the member's address concealed on\n" " the list of subscribers?" msgstr "" #: Mailman/Cgi/admin.py:1153 msgid "" "nomail -- Is delivery to the member disabled? If so, an\n" " abbreviation will be given describing the reason for the disabled\n" " delivery:\n" "
    • U -- Delivery was disabled by the user via their\n" " personal options page.\n" "
    • A -- Delivery was disabled by the list\n" " administrators.\n" "
    • B -- Delivery was disabled by the system due to\n" " excessive bouncing from the member's address.\n" "
    • ? -- The reason for disabled delivery isn't known.\n" " This is the case for all memberships which were disabled\n" " in older versions of Mailman.\n" "
    " msgstr "" #: Mailman/Cgi/admin.py:1168 msgid "" "ack -- Does the member get acknowledgements of their\n" " posts?" msgstr "" #: Mailman/Cgi/admin.py:1171 msgid "" "not metoo -- Does the member want to avoid copies of their\n" " own postings?" msgstr "" #: Mailman/Cgi/admin.py:1174 msgid "" "nodupes -- Does the member want to avoid duplicates of the\n" " same message?" msgstr "" #: Mailman/Cgi/admin.py:1177 msgid "" "digest -- Does the member get messages in digests?\n" " (otherwise, individual messages)" msgstr "" #: Mailman/Cgi/admin.py:1180 msgid "" "plain -- If getting digests, does the member get plain\n" " text digests? (otherwise, MIME)" msgstr "" #: Mailman/Cgi/admin.py:1182 msgid "language -- Language preferred by the user" msgstr "" #: Mailman/Cgi/admin.py:1196 msgid "Click here to hide the legend for this table." msgstr "" #: Mailman/Cgi/admin.py:1200 msgid "Click here to include the legend for this table." msgstr "" #: Mailman/Cgi/admin.py:1207 msgid "" "

    To view more members, click on the appropriate\n" " range listed below:" msgstr "" #: Mailman/Cgi/admin.py:1221 msgid "from %(start)s to %(end)s" msgstr "" #: Mailman/Cgi/admin.py:1234 msgid "Subscribe these users now or invite them?" msgstr "" #: Mailman/Cgi/admin.py:1236 msgid "Invite" msgstr "" #: Mailman/Cgi/admin.py:1236 Mailman/Cgi/listinfo.py:199 msgid "Subscribe" msgstr "" #: Mailman/Cgi/admin.py:1243 msgid "Send welcome messages to new subscribers?" msgstr "" #: Mailman/Cgi/admin.py:1245 Mailman/Cgi/admin.py:1254 #: Mailman/Cgi/admin.py:1287 Mailman/Cgi/admin.py:1295 #: Mailman/Cgi/confirm.py:304 Mailman/Cgi/create.py:371 #: Mailman/Cgi/create.py:406 Mailman/Cgi/create.py:444 #: Mailman/Cgi/rmlist.py:248 Mailman/Gui/Archive.py:33 #: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62 #: Mailman/Gui/Autoresponse.py:71 Mailman/Gui/Bounce.py:77 #: Mailman/Gui/Bounce.py:120 Mailman/Gui/Bounce.py:146 #: Mailman/Gui/Bounce.py:155 Mailman/Gui/Bounce.py:164 #: Mailman/Gui/ContentFilter.py:74 Mailman/Gui/ContentFilter.py:116 #: Mailman/Gui/ContentFilter.py:120 Mailman/Gui/Digest.py:46 #: Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 Mailman/Gui/Digest.py:89 #: Mailman/Gui/General.py:158 Mailman/Gui/General.py:223 #: Mailman/Gui/General.py:229 Mailman/Gui/General.py:307 #: Mailman/Gui/General.py:334 Mailman/Gui/General.py:361 #: Mailman/Gui/General.py:372 Mailman/Gui/General.py:375 #: Mailman/Gui/General.py:385 Mailman/Gui/General.py:390 #: Mailman/Gui/General.py:396 Mailman/Gui/General.py:416 #: Mailman/Gui/General.py:448 Mailman/Gui/General.py:471 #: Mailman/Gui/General.py:488 Mailman/Gui/General.py:511 #: Mailman/Gui/NonDigest.py:45 Mailman/Gui/NonDigest.py:53 #: Mailman/Gui/NonDigest.py:140 Mailman/Gui/NonDigest.py:162 #: Mailman/Gui/Privacy.py:111 Mailman/Gui/Privacy.py:129 #: Mailman/Gui/Privacy.py:162 Mailman/Gui/Privacy.py:215 #: Mailman/Gui/Privacy.py:317 Mailman/Gui/Privacy.py:334 #: Mailman/Gui/Privacy.py:489 Mailman/Gui/Privacy.py:508 #: Mailman/Gui/Usenet.py:52 Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 #: Mailman/Gui/Usenet.py:105 msgid "No" msgstr "" #: Mailman/Cgi/admin.py:1245 Mailman/Cgi/admin.py:1254 #: Mailman/Cgi/admin.py:1287 Mailman/Cgi/admin.py:1295 #: Mailman/Cgi/confirm.py:304 Mailman/Cgi/create.py:371 #: Mailman/Cgi/create.py:406 Mailman/Cgi/create.py:444 #: Mailman/Cgi/rmlist.py:248 Mailman/Gui/Archive.py:33 #: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62 #: Mailman/Gui/Bounce.py:77 Mailman/Gui/Bounce.py:120 #: Mailman/Gui/Bounce.py:146 Mailman/Gui/Bounce.py:155 #: Mailman/Gui/Bounce.py:164 Mailman/Gui/ContentFilter.py:74 #: Mailman/Gui/ContentFilter.py:116 Mailman/Gui/ContentFilter.py:120 #: Mailman/Gui/Digest.py:46 Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 #: Mailman/Gui/Digest.py:89 Mailman/Gui/General.py:223 #: Mailman/Gui/General.py:229 Mailman/Gui/General.py:307 #: Mailman/Gui/General.py:334 Mailman/Gui/General.py:361 #: Mailman/Gui/General.py:372 Mailman/Gui/General.py:375 #: Mailman/Gui/General.py:385 Mailman/Gui/General.py:390 #: Mailman/Gui/General.py:396 Mailman/Gui/General.py:416 #: Mailman/Gui/General.py:448 Mailman/Gui/General.py:471 #: Mailman/Gui/General.py:488 Mailman/Gui/General.py:511 #: Mailman/Gui/NonDigest.py:45 Mailman/Gui/NonDigest.py:53 #: Mailman/Gui/NonDigest.py:140 Mailman/Gui/NonDigest.py:162 #: Mailman/Gui/Privacy.py:111 Mailman/Gui/Privacy.py:129 #: Mailman/Gui/Privacy.py:162 Mailman/Gui/Privacy.py:215 #: Mailman/Gui/Privacy.py:317 Mailman/Gui/Privacy.py:334 #: Mailman/Gui/Privacy.py:489 Mailman/Gui/Privacy.py:508 #: Mailman/Gui/Usenet.py:52 Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93 #: Mailman/Gui/Usenet.py:105 msgid "Yes" msgstr "" #: Mailman/Cgi/admin.py:1252 msgid "Send notifications of new subscriptions to the list owner?" msgstr "" #: Mailman/Cgi/admin.py:1260 Mailman/Cgi/admin.py:1301 #: Mailman/Cgi/admin.py:1347 msgid "Enter one address per line below..." msgstr "" #: Mailman/Cgi/admin.py:1265 Mailman/Cgi/admin.py:1306 #: Mailman/Cgi/admin.py:1352 msgid "...or specify a file to upload:" msgstr "" #: Mailman/Cgi/admin.py:1270 msgid "" "Below, enter additional text to be added to the\n" " top of your invitation or the subscription notification. Include at least\n" " one blank line at the end..." msgstr "" #: Mailman/Cgi/admin.py:1285 msgid "Send unsubscription acknowledgement to the user?" msgstr "" #: Mailman/Cgi/admin.py:1293 msgid "Send notifications to the list owner?" msgstr "" #: Mailman/Cgi/admin.py:1316 msgid "" "To change a list member's address, enter the\n" " member's current and new addresses below. Use the check boxes to send\n" " notice of the change to the old and/or new address(es)." msgstr "" #: Mailman/Cgi/admin.py:1321 msgid "Member's current address" msgstr "" #: Mailman/Cgi/admin.py:1325 Mailman/Cgi/admin.py:1335 msgid "Send notice" msgstr "" #: Mailman/Cgi/admin.py:1331 msgid "Address to change to" msgstr "" #: Mailman/Cgi/admin.py:1361 msgid "Change list ownership passwords" msgstr "" #: Mailman/Cgi/admin.py:1364 msgid "" "The list administrators are the people who have ultimate control over\n" "all parameters of this mailing list. They are able to change any list\n" "configuration variable available through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions; they are not\n" "able to change any list configuration variable, but they are allowed to tend\n" "to pending administration requests, including approving or rejecting held\n" "subscription requests, and disposing of held postings. Of course, the\n" "list administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into administrators and\n" "moderators, you must set a separate moderator password in the fields below,\n" "and also provide the email addresses of the list moderators in the\n" "general options section." msgstr "" #: Mailman/Cgi/admin.py:1383 msgid "Enter new administrator password:" msgstr "" #: Mailman/Cgi/admin.py:1385 msgid "Confirm administrator password:" msgstr "" #: Mailman/Cgi/admin.py:1390 msgid "Enter new moderator password:" msgstr "" #: Mailman/Cgi/admin.py:1392 msgid "Confirm moderator password:" msgstr "" #: Mailman/Cgi/admin.py:1396 msgid "" "In addition to the above passwords you may specify a password for\n" "pre-approving posts to the list. Either of the above two passwords can\n" "be used in an Approved: header or first body line pseudo-header to\n" "pre-approve a post that would otherwise be held for moderation. In\n" "addition, the password below, if set, can be used for that purpose and\n" "no other." msgstr "" #: Mailman/Cgi/admin.py:1407 msgid "Enter new poster password:" msgstr "" #: Mailman/Cgi/admin.py:1409 msgid "Confirm poster password:" msgstr "" #: Mailman/Cgi/admin.py:1418 msgid "Submit Your Changes" msgstr "" #: Mailman/Cgi/admin.py:1442 msgid "Moderator passwords did not match" msgstr "" #: Mailman/Cgi/admin.py:1453 msgid "Poster passwords did not match" msgstr "" #: Mailman/Cgi/admin.py:1463 msgid "Administrator passwords did not match" msgstr "" #: Mailman/Cgi/admin.py:1510 msgid "admin mass sub" msgstr "" #: Mailman/Cgi/admin.py:1516 msgid "Already a member" msgstr "" #: Mailman/Cgi/admin.py:1519 Mailman/Cgi/admin.py:1693 msgid "<blank line>" msgstr "" #: Mailman/Cgi/admin.py:1520 Mailman/Cgi/admin.py:1523 #: Mailman/Cgi/admin.py:1694 Mailman/Cgi/admin.py:1697 #: Mailman/Cgi/admindb.py:977 msgid "Bad/Invalid email address" msgstr "" #: Mailman/Cgi/admin.py:1526 Mailman/Cgi/admin.py:1700 msgid "Hostile address (illegal characters)" msgstr "" #: Mailman/Cgi/admin.py:1529 Mailman/Cgi/admin.py:1703 bin/add_members:175 #: bin/clone_member:136 bin/sync_members:268 msgid "Banned address (matched %(pattern)s)" msgstr "" #: Mailman/Cgi/admin.py:1535 msgid "Successfully invited:" msgstr "" #: Mailman/Cgi/admin.py:1537 Mailman/Cgi/admin.py:1728 msgid "Successfully subscribed:" msgstr "" #: Mailman/Cgi/admin.py:1542 msgid "Error inviting:" msgstr "" #: Mailman/Cgi/admin.py:1544 Mailman/Cgi/admin.py:1732 msgid "Error subscribing:" msgstr "" #: Mailman/Cgi/admin.py:1568 msgid "admin mass unsub" msgstr "" #: Mailman/Cgi/admin.py:1578 Mailman/Cgi/admin.py:1737 msgid "Successfully Unsubscribed:" msgstr "" #: Mailman/Cgi/admin.py:1583 msgid "Cannot unsubscribe non-members:" msgstr "" #: Mailman/Cgi/admin.py:1596 msgid "You must provide both current and new addresses." msgstr "" #: Mailman/Cgi/admin.py:1598 msgid "Current and new addresses must be different." msgstr "" #: Mailman/Cgi/admin.py:1602 msgid "%(schange_to)s is already a list member." msgstr "" #: Mailman/Cgi/admin.py:1607 msgid "%(schange_to)s is not a valid email address." msgstr "" #: Mailman/Cgi/admin.py:1615 msgid "%(schange_from)s is not a member" msgstr "" #: Mailman/Cgi/admin.py:1617 msgid "%(schange_to)s is already a member" msgstr "" #: Mailman/Cgi/admin.py:1620 msgid "%(schange_to)s matches banned pattern %(spat)s" msgstr "" #: Mailman/Cgi/admin.py:1622 msgid "Address %(schange_from)s changed to %(schange_to)s" msgstr "" #: Mailman/Cgi/admin.py:1629 msgid "" "The member address %(change_from)s on the\n" "%(list_name)s list has been changed to %(change_to)s.\n" msgstr "" #: Mailman/Cgi/admin.py:1632 msgid "%(list_name)s address change notice." msgstr "" #: Mailman/Cgi/admin.py:1643 msgid "Notification sent to %(schange_from)s." msgstr "" #: Mailman/Cgi/admin.py:1653 msgid "Notification sent to %(schange_to)s." msgstr "" #: Mailman/Cgi/admin.py:1745 msgid "Bad moderation flag value" msgstr "" #: Mailman/Cgi/admin.py:1765 msgid "member mgt page" msgstr "" #: Mailman/Cgi/admin.py:1770 msgid "Not subscribed" msgstr "" #: Mailman/Cgi/admin.py:1773 msgid "Ignoring changes to deleted member: %(user)s" msgstr "" #: Mailman/Cgi/admin.py:1813 msgid "Successfully Removed:" msgstr "" #: Mailman/Cgi/admin.py:1817 msgid "Error Unsubscribing:" msgstr "" #: Mailman/Cgi/admindb.py:235 Mailman/Cgi/admindb.py:248 msgid "%(realname)s Administrative Database" msgstr "" #: Mailman/Cgi/admindb.py:238 msgid "%(realname)s Administrative Database Results" msgstr "" #: Mailman/Cgi/admindb.py:251 msgid "There are no pending requests." msgstr "" #: Mailman/Cgi/admindb.py:254 msgid "Click here to reload this page." msgstr "" #: Mailman/Cgi/admindb.py:269 msgid "Detailed instructions for the administrative database" msgstr "" #: Mailman/Cgi/admindb.py:273 msgid "Administrative requests for mailing list:" msgstr "" #: Mailman/Cgi/admindb.py:276 Mailman/Cgi/admindb.py:336 msgid "Submit All Data" msgstr "" #: Mailman/Cgi/admindb.py:283 Mailman/Cgi/admindb.py:333 msgid "Discard all messages marked Defer" msgstr "" #: Mailman/Cgi/admindb.py:298 msgid "all of %(esender)s's held messages." msgstr "" #: Mailman/Cgi/admindb.py:303 msgid "a single held message." msgstr "" #: Mailman/Cgi/admindb.py:308 msgid "all held messages." msgstr "" #: Mailman/Cgi/admindb.py:356 msgid "Mailman Administrative Database Error" msgstr "" #: Mailman/Cgi/admindb.py:361 msgid "list of available mailing lists." msgstr "" #: Mailman/Cgi/admindb.py:362 msgid "You must specify a list name. Here is the %(link)s" msgstr "" #: Mailman/Cgi/admindb.py:375 msgid "Subscription Requests" msgstr "" #: Mailman/Cgi/admindb.py:377 msgid "Address/name/time" msgstr "" #: Mailman/Cgi/admindb.py:378 Mailman/Cgi/admindb.py:435 msgid "Your decision" msgstr "" #: Mailman/Cgi/admindb.py:379 Mailman/Cgi/admindb.py:436 msgid "Reason for refusal" msgstr "" #: Mailman/Cgi/admindb.py:399 Mailman/Cgi/admindb.py:463 #: Mailman/Cgi/admindb.py:760 Mailman/Commands/cmd_confirm.py:90 msgid "Approve" msgstr "" #: Mailman/Cgi/admindb.py:410 msgid "Permanently ban from this list" msgstr "" #: Mailman/Cgi/admindb.py:434 msgid "User address/name" msgstr "" #: Mailman/Cgi/admindb.py:475 msgid "Unsubscription Requests" msgstr "" #: Mailman/Cgi/admindb.py:487 msgid "Held Messages" msgstr "" #: Mailman/Cgi/admindb.py:490 msgid "Show this list grouped/sorted by" msgstr "" #: Mailman/Cgi/admindb.py:493 msgid "sender/sender" msgstr "" #: Mailman/Cgi/admindb.py:493 msgid "sender/time" msgstr "" #: Mailman/Cgi/admindb.py:493 msgid "ungrouped/time" msgstr "" #: Mailman/Cgi/admindb.py:509 Mailman/Cgi/admindb.py:747 msgid "From:" msgstr "" #: Mailman/Cgi/admindb.py:512 msgid "Action to take on all these held messages:" msgstr "" #: Mailman/Cgi/admindb.py:525 msgid "Preserve messages for the site administrator" msgstr "" #: Mailman/Cgi/admindb.py:533 msgid "Forward messages (individually) to:" msgstr "" #: Mailman/Cgi/admindb.py:553 msgid "Clear this member's moderate flag" msgstr "" #: Mailman/Cgi/admindb.py:558 msgid "The sender is now a member of this list" msgstr "" #: Mailman/Cgi/admindb.py:568 msgid "Add %(esender)s to one of these sender filters:" msgstr "" #: Mailman/Cgi/admindb.py:574 msgid "Accepts" msgstr "" #: Mailman/Cgi/admindb.py:574 msgid "Discards" msgstr "" #: Mailman/Cgi/admindb.py:574 msgid "Holds" msgstr "" #: Mailman/Cgi/admindb.py:574 msgid "Rejects" msgstr "" #: Mailman/Cgi/admindb.py:584 msgid "" "Ban %(esender)s from ever subscribing to this\n" " mailing list" msgstr "" #: Mailman/Cgi/admindb.py:589 msgid "" "Click on the message number to view the individual\n" " message, or you can " msgstr "" #: Mailman/Cgi/admindb.py:591 msgid "view all messages from %(esender)s" msgstr "" #: Mailman/Cgi/admindb.py:613 Mailman/Cgi/admindb.py:750 msgid "Subject:" msgstr "" #: Mailman/Cgi/admindb.py:616 msgid " bytes" msgstr "" #: Mailman/Cgi/admindb.py:616 msgid "Size:" msgstr "" #: Mailman/Cgi/admindb.py:620 Mailman/Handlers/Scrubber.py:206 #: Mailman/Handlers/Scrubber.py:304 Mailman/Handlers/Scrubber.py:306 msgid "not available" msgstr "" #: Mailman/Cgi/admindb.py:621 Mailman/Cgi/admindb.py:753 msgid "Reason:" msgstr "" #: Mailman/Cgi/admindb.py:625 Mailman/Cgi/admindb.py:757 msgid "Received:" msgstr "" #: Mailman/Cgi/admindb.py:681 msgid "Posting Held for Approval" msgstr "" #: Mailman/Cgi/admindb.py:683 msgid " (%(count)d of %(total)d)" msgstr "" #: Mailman/Cgi/admindb.py:694 msgid "Message with id #%(id)d was lost." msgstr "" #: Mailman/Cgi/admindb.py:703 msgid "Message with id #%(id)d is corrupted." msgstr "" #: Mailman/Cgi/admindb.py:769 msgid "Preserve message for site administrator" msgstr "" #: Mailman/Cgi/admindb.py:775 msgid "Additionally, forward this message to: " msgstr "" #: Mailman/Cgi/admindb.py:780 Mailman/Cgi/admindb.py:849 #: Mailman/Cgi/admindb.py:926 Mailman/Cgi/admindb.py:928 msgid "[No explanation given]" msgstr "" #: Mailman/Cgi/admindb.py:782 msgid "If you reject this post,
    please explain (optional):" msgstr "" #: Mailman/Cgi/admindb.py:788 msgid "Message Headers:" msgstr "" #: Mailman/Cgi/admindb.py:793 msgid "Message Excerpt:" msgstr "" #: Mailman/Cgi/admindb.py:965 msgid "Database Updated..." msgstr "" #: Mailman/Cgi/admindb.py:969 msgid " is already a member" msgstr "" #: Mailman/Cgi/admindb.py:973 msgid "%(addr)s is banned (matched: %(patt)s)" msgstr "" #: Mailman/Cgi/confirm.py:88 msgid "Confirmation string was empty." msgstr "" #: Mailman/Cgi/confirm.py:108 msgid "" "Invalid confirmation string:\n" " %(safecookie)s.\n" "\n" "

    Note that confirmation strings expire approximately\n" " %(days)s days after the initial request. They also expire if the\n" " request has already been handled in some way. If your confirmation\n" " has expired, please try to re-submit your request.\n" " Otherwise, re-enter your confirmation\n" " string." msgstr "" #: Mailman/Cgi/confirm.py:142 msgid "" "The address requesting unsubscription is not\n" " a member of the mailing list. Perhaps you have already been\n" " unsubscribed, e.g. by the list administrator?" msgstr "" #: Mailman/Cgi/confirm.py:158 msgid "" "The address requesting to be changed has\n" " been subsequently unsubscribed. This request has been\n" " cancelled." msgstr "" #: Mailman/Cgi/confirm.py:178 msgid "System error, bad content: %(content)s" msgstr "" #: Mailman/Cgi/confirm.py:188 msgid "Bad confirmation string" msgstr "" #: Mailman/Cgi/confirm.py:207 msgid "Enter confirmation cookie" msgstr "" #: Mailman/Cgi/confirm.py:220 msgid "" "Please enter the confirmation string\n" " (i.e. cookie) that you received in your email message, in the box\n" " below. Then hit the Submit button to proceed to the next\n" " confirmation step." msgstr "" #: Mailman/Cgi/confirm.py:225 msgid "Confirmation string:" msgstr "" #: Mailman/Cgi/confirm.py:227 msgid "Submit" msgstr "" #: Mailman/Cgi/confirm.py:244 msgid "Confirm subscription request" msgstr "" #: Mailman/Cgi/confirm.py:259 msgid "" "Your confirmation is required in order to complete the\n" " subscription request to the mailing list %(listname)s. Your\n" " subscription settings are shown below; make any necessary changes and hit\n" " Subscribe to complete the confirmation process. Once you've\n" " confirmed your subscription request, you will be shown your account\n" " options page which you can use to further customize your membership\n" " options.\n" "\n" "

    Note: your password will be emailed to you once your subscription is\n" " confirmed. You can change it by visiting your personal options page.\n" "\n" "

    Or hit Cancel my subscription request if you no longer want to\n" " subscribe to this list." msgstr "" #: Mailman/Cgi/confirm.py:275 msgid "" "Your confirmation is required in order to continue with\n" " the subscription request to the mailing list %(listname)s.\n" " Your subscription settings are shown below; make any necessary changes\n" " and hit Subscribe to list ... to complete the confirmation\n" " process. Once you've confirmed your subscription request, the\n" " moderator must approve or reject your membership request. You will\n" " receive notice of their decision.\n" "\n" "

    Note: your password will be emailed to you once your subscription\n" " is confirmed. You can change it by visiting your personal options\n" " page.\n" "\n" "

    Or, if you've changed your mind and do not want to subscribe to\n" " this mailing list, you can hit Cancel my subscription\n" " request." msgstr "" #: Mailman/Cgi/confirm.py:293 msgid "Your email address:" msgstr "" #: Mailman/Cgi/confirm.py:294 msgid "Your real name:" msgstr "" #: Mailman/Cgi/confirm.py:303 msgid "Receive digests?" msgstr "" #: Mailman/Cgi/confirm.py:312 msgid "Preferred language:" msgstr "" #: Mailman/Cgi/confirm.py:317 msgid "Subscribe to list %(listname)s" msgstr "" #: Mailman/Cgi/confirm.py:318 msgid "Cancel my subscription request" msgstr "" #: Mailman/Cgi/confirm.py:341 msgid "You have canceled your subscription request." msgstr "" #: Mailman/Cgi/confirm.py:383 msgid "Awaiting moderator approval" msgstr "" #: Mailman/Cgi/confirm.py:386 msgid "" " You have successfully confirmed your subscription request to the\n" " mailing list %(listname)s, however final approval is required from\n" " the list moderator before you will be subscribed. Your request\n" " has been forwarded to the list moderator, and you will be notified\n" " of the moderator's decision." msgstr "" #: Mailman/Cgi/confirm.py:393 Mailman/Cgi/confirm.py:459 #: Mailman/Cgi/confirm.py:549 Mailman/Cgi/confirm.py:788 msgid "" "Invalid confirmation string. It is\n" " possible that you are attempting to confirm a request for an\n" " address that has already been unsubscribed." msgstr "" #: Mailman/Cgi/confirm.py:397 msgid "You are already a member of this mailing list!" msgstr "" #: Mailman/Cgi/confirm.py:400 msgid "" "You are currently banned from subscribing to\n" " this list. If you think this restriction is erroneous, please\n" " contact the list owners at %(owneraddr)s." msgstr "" #: Mailman/Cgi/confirm.py:404 msgid "" " You were not invited to this mailing list. The invitation has\n" " been discarded, and both list administrators have been\n" " alerted." msgstr "" #: Mailman/Cgi/confirm.py:414 msgid "Subscription request confirmed" msgstr "" #: Mailman/Cgi/confirm.py:418 msgid "" " You have successfully confirmed your subscription request for\n" " \"%(addr)s\" to the %(listname)s mailing list. A separate\n" " confirmation message will be sent to your email address, along\n" " with your password, and other useful information and links.\n" "\n" "

    You can now\n" " proceed to your membership login\n" " page." msgstr "" #: Mailman/Cgi/confirm.py:436 msgid "You have canceled your unsubscription request." msgstr "" #: Mailman/Cgi/confirm.py:465 msgid "Unsubscription request confirmed" msgstr "" #: Mailman/Cgi/confirm.py:469 msgid "" " You have successfully unsubscribed from the %(listname)s mailing\n" " list. You can now visit the list's main\n" " information page." msgstr "" #: Mailman/Cgi/confirm.py:480 msgid "Confirm unsubscription request" msgstr "" #: Mailman/Cgi/confirm.py:495 Mailman/Cgi/confirm.py:598 msgid "Not available" msgstr "" #: Mailman/Cgi/confirm.py:498 msgid "" "Your confirmation is required in order to complete the\n" " unsubscription request from the mailing list %(listname)s. You\n" " are currently subscribed with\n" "\n" "

    • Real name: %(fullname)s\n" "
    • Email address: %(addr)s\n" "
    \n" "\n" " Hit the Unsubscribe button below to complete the confirmation\n" " process.\n" "\n" "

    Or hit Cancel and discard to cancel this unsubscription\n" " request." msgstr "" #: Mailman/Cgi/confirm.py:514 Mailman/Cgi/options.py:863 #: Mailman/Cgi/options.py:1010 Mailman/Cgi/options.py:1020 msgid "Unsubscribe" msgstr "" #: Mailman/Cgi/confirm.py:515 Mailman/Cgi/confirm.py:627 msgid "Cancel and discard" msgstr "" #: Mailman/Cgi/confirm.py:525 msgid "You have canceled your change of address request." msgstr "" #: Mailman/Cgi/confirm.py:555 msgid "" "%(newaddr)s is banned from subscribing to the\n" " %(realname)s list. If you think this restriction is erroneous,\n" " please contact the list owners at %(owneraddr)s." msgstr "" #: Mailman/Cgi/confirm.py:560 msgid "" "%(newaddr)s is already a member of\n" " the %(realname)s list. It is possible that you are attempting\n" " to confirm a request for an address that has already been\n" " subscribed." msgstr "" #: Mailman/Cgi/confirm.py:567 msgid "Change of address request confirmed" msgstr "" #: Mailman/Cgi/confirm.py:571 msgid "" " You have successfully changed your address on the %(listname)s\n" " mailing list from %(oldaddr)s to %(newaddr)s. You\n" " can now proceed to your membership\n" " login page." msgstr "" #: Mailman/Cgi/confirm.py:583 msgid "Confirm change of address request" msgstr "" #: Mailman/Cgi/confirm.py:602 msgid "globally" msgstr "" #: Mailman/Cgi/confirm.py:605 msgid "" "Your confirmation is required in order to complete the\n" " change of address request for the mailing list %(listname)s. You\n" " are currently subscribed with\n" "\n" "

    • Real name: %(fullname)s\n" "
    • Old email address: %(oldaddr)s\n" "
    \n" "\n" " and you have requested to %(globallys)s change your email address to\n" "\n" "
    • New email address: %(newaddr)s\n" "
    \n" "\n" " Hit the Change address button below to complete the confirmation\n" " process.\n" "\n" "

    Or hit Cancel and discard to cancel this change of address\n" " request." msgstr "" #: Mailman/Cgi/confirm.py:626 msgid "Change address" msgstr "" #: Mailman/Cgi/confirm.py:635 Mailman/Cgi/confirm.py:752 msgid "Continue awaiting approval" msgstr "" #: Mailman/Cgi/confirm.py:643 msgid "" "Okay, the list moderator will still have the\n" " opportunity to approve or reject this message." msgstr "" #: Mailman/Cgi/confirm.py:671 msgid "Sender discarded message via web." msgstr "" #: Mailman/Cgi/confirm.py:674 msgid "" "The held message with the Subject:\n" " header %(subject)s could not be found. The most likely\n" " reason for this is that the list moderator has already approved or\n" " rejected the message. You were not able to cancel it in\n" " time." msgstr "" #: Mailman/Cgi/confirm.py:682 msgid "Posted message canceled" msgstr "" #: Mailman/Cgi/confirm.py:685 msgid "" " You have successfully canceled the posting of your message with\n" " the Subject: header %(subject)s to the mailing list\n" " %(listname)s." msgstr "" #: Mailman/Cgi/confirm.py:696 msgid "Cancel held message posting" msgstr "" #: Mailman/Cgi/confirm.py:721 msgid "" "The held message you were referred to has\n" " already been handled by the list administrator." msgstr "" #: Mailman/Cgi/confirm.py:735 msgid "" "Your confirmation is required in order to cancel the\n" " posting of your message to the mailing list %(listname)s:\n" "\n" "

    • Sender: %(sender)s\n" "
    • Subject: %(subject)s\n" "
    • Reason: %(reason)s\n" "
    \n" "\n" " Hit the Cancel posting button to discard the posting.\n" "\n" "

    Or hit the Continue awaiting approval button to continue to\n" " allow the list moderator to approve or reject the message." msgstr "" #: Mailman/Cgi/confirm.py:751 msgid "Cancel posting" msgstr "" #: Mailman/Cgi/confirm.py:763 msgid "" "You have canceled the re-enabling of your membership. If\n" " we continue to receive bounces from your address, it could be deleted from\n" " this mailing list." msgstr "" #: Mailman/Cgi/confirm.py:794 msgid "Membership re-enabled." msgstr "" #: Mailman/Cgi/confirm.py:798 msgid "" " You have successfully re-enabled your membership in the\n" " %(listname)s mailing list. You can now visit your member options page.\n" " " msgstr "" #: Mailman/Cgi/confirm.py:810 msgid "Re-enable mailing list membership" msgstr "" #: Mailman/Cgi/confirm.py:827 msgid "" "We're sorry, but you have already been unsubscribed\n" " from this mailing list. To re-subscribe, please visit the\n" " list information page." msgstr "" #: Mailman/Cgi/confirm.py:842 msgid "not available" msgstr "" #: Mailman/Cgi/confirm.py:846 msgid "" "Your membership in the %(realname)s mailing list is\n" " currently disabled due to excessive bounces. Your confirmation is\n" " required in order to re-enable delivery to your address. We have the\n" " following information on file:\n" "\n" "

    • Member address: %(member)s\n" "
    • Member name: %(username)s\n" "
    • Last bounce received on: %(date)s\n" "
    • Approximate number of days before you are permanently removed\n" " from this list: %(daysleft)s\n" "
    \n" "\n" " Hit the Re-enable membership button to resume receiving postings\n" " from the mailing list. Or hit the Cancel button to defer\n" " re-enabling your membership.\n" " " msgstr "" #: Mailman/Cgi/confirm.py:866 msgid "Re-enable membership" msgstr "" #: Mailman/Cgi/confirm.py:867 msgid "Cancel" msgstr "" #: Mailman/Cgi/create.py:60 Mailman/Cgi/rmlist.py:59 msgid "Bad URL specification" msgstr "" #: Mailman/Cgi/create.py:75 Mailman/Cgi/rmlist.py:196 msgid "Return to the " msgstr "" #: Mailman/Cgi/create.py:77 Mailman/Cgi/rmlist.py:198 msgid "general list overview" msgstr "" #: Mailman/Cgi/create.py:78 Mailman/Cgi/rmlist.py:199 msgid "
    Return to the " msgstr "" #: Mailman/Cgi/create.py:80 Mailman/Cgi/rmlist.py:201 msgid "administrative list overview" msgstr "" #: Mailman/Cgi/create.py:115 msgid "List name must not include \"@\": %(safelistname)s" msgstr "" #: Mailman/Cgi/create.py:122 msgid "List already exists: %(safelistname)s" msgstr "" #: Mailman/Cgi/create.py:126 msgid "You forgot to enter the list name" msgstr "" #: Mailman/Cgi/create.py:130 msgid "You forgot to specify the list owner" msgstr "" #: Mailman/Cgi/create.py:137 msgid "" "Leave the initial password (and confirmation) fields\n" " blank if you want Mailman to autogenerate the list\n" " passwords." msgstr "" #: Mailman/Cgi/create.py:146 msgid "Initial list passwords do not match" msgstr "" #: Mailman/Cgi/create.py:155 msgid "The list password cannot be empty" msgstr "" #: Mailman/Cgi/create.py:174 msgid "You are not authorized to create new mailing lists" msgstr "" #: Mailman/Cgi/create.py:182 msgid "Unknown virtual host: %(safehostname)s" msgstr "" #: Mailman/Cgi/create.py:218 bin/newlist:219 msgid "Bad owner email address: %(s)s" msgstr "" #: Mailman/Cgi/create.py:223 bin/newlist:182 bin/newlist:223 msgid "List already exists: %(listname)s" msgstr "" #: Mailman/Cgi/create.py:231 bin/newlist:217 msgid "Illegal list name: %(s)s" msgstr "" #: Mailman/Cgi/create.py:236 msgid "" "Some unknown error occurred while creating the list.\n" " Please contact the site administrator for assistance." msgstr "" #: Mailman/Cgi/create.py:273 bin/newlist:265 msgid "Your new mailing list: %(listname)s" msgstr "" #: Mailman/Cgi/create.py:282 msgid "Mailing list creation results" msgstr "" #: Mailman/Cgi/create.py:288 msgid "" "You have successfully created the mailing list\n" " %(listname)s and notification has been sent to the list owner\n" " %(owner)s. You can now:" msgstr "" #: Mailman/Cgi/create.py:292 msgid "Visit the list's info page" msgstr "" #: Mailman/Cgi/create.py:293 msgid "Visit the list's admin page" msgstr "" #: Mailman/Cgi/create.py:294 msgid "Create another list" msgstr "" #: Mailman/Cgi/create.py:312 msgid "Create a %(hostname)s Mailing List" msgstr "" #: Mailman/Cgi/create.py:321 Mailman/Cgi/rmlist.py:219 #: Mailman/Gui/Bounce.py:196 Mailman/htmlformat.py:360 msgid "Error: " msgstr "" #: Mailman/Cgi/create.py:323 msgid "" "You can create a new mailing list by entering the\n" " relevant information into the form below. The name of the mailing list\n" " will be used as the primary address for posting messages to the list, so\n" " it should be lowercased. You will not be able to change this once the\n" " list is created.\n" "\n" "

    You also need to enter the email address of the initial list owner.\n" " Once the list is created, the list owner will be given notification, along\n" " with the initial list password. The list owner will then be able to\n" " modify the password and add or remove additional list owners.\n" "\n" "

    If you want Mailman to automatically generate the initial list admin\n" " password, click on `Yes' in the autogenerate field below, and leave the\n" " initial list password fields empty.\n" "\n" "

    You must have the proper authorization to create new mailing lists.\n" " Each site should have a list creator's password, which you can\n" " enter in the field at the bottom. Note that the site administrator's\n" " password can also be used for authentication.\n" " " msgstr "" #: Mailman/Cgi/create.py:349 msgid "List Identity" msgstr "" #: Mailman/Cgi/create.py:354 msgid "Name of list:" msgstr "" #: Mailman/Cgi/create.py:361 msgid "Initial list owner address:" msgstr "" #: Mailman/Cgi/create.py:370 msgid "Auto-generate initial list password?" msgstr "" #: Mailman/Cgi/create.py:378 msgid "Initial list password:" msgstr "" #: Mailman/Cgi/create.py:384 msgid "Confirm initial password:" msgstr "" #: Mailman/Cgi/create.py:399 msgid "List Characteristics" msgstr "" #: Mailman/Cgi/create.py:403 msgid "" "Should new members be quarantined before they\n" " are allowed to post unmoderated to this list? Answer Yes to hold\n" " new member postings for moderator approval by default." msgstr "" #: Mailman/Cgi/create.py:432 msgid "" "Initial list of supported languages.

    Note that if you do not\n" " select at least one initial language, the list will use the server\n" " default language of %(deflang)s" msgstr "" #: Mailman/Cgi/create.py:443 msgid "Send \"list created\" email to list owner?" msgstr "" #: Mailman/Cgi/create.py:452 msgid "List creator's (authentication) password:" msgstr "" #: Mailman/Cgi/create.py:457 msgid "Create List" msgstr "" #: Mailman/Cgi/create.py:458 msgid "Clear Form" msgstr "" #: Mailman/Cgi/edithtml.py:48 msgid "General list information page" msgstr "" #: Mailman/Cgi/edithtml.py:49 msgid "Subscribe results page" msgstr "" #: Mailman/Cgi/edithtml.py:50 msgid "User specific options page" msgstr "" #: Mailman/Cgi/edithtml.py:51 msgid "Welcome email text file" msgstr "" #: Mailman/Cgi/edithtml.py:52 msgid "Digest masthead" msgstr "" #: Mailman/Cgi/edithtml.py:53 msgid "User notice of held post" msgstr "" #: Mailman/Cgi/edithtml.py:54 msgid "User notice of held subscription" msgstr "" #: Mailman/Cgi/edithtml.py:55 msgid "Notice of post refused by moderator" msgstr "" #: Mailman/Cgi/edithtml.py:56 msgid "Invitation to join list" msgstr "" #: Mailman/Cgi/edithtml.py:57 msgid "Request to confirm subscription" msgstr "" #: Mailman/Cgi/edithtml.py:58 msgid "Request to confirm unsubscription" msgstr "" #: Mailman/Cgi/edithtml.py:59 msgid "User notice of autoresponse limit" msgstr "" #: Mailman/Cgi/edithtml.py:60 msgid "User post acknowledgement" msgstr "" #: Mailman/Cgi/edithtml.py:61 msgid "Subscription disabled by bounce warning" msgstr "" #: Mailman/Cgi/edithtml.py:62 msgid "Admin/moderator login page" msgstr "" #: Mailman/Cgi/edithtml.py:63 msgid "Private archive login page" msgstr "" #: Mailman/Cgi/edithtml.py:64 msgid "On demand password reminder" msgstr "" #: Mailman/Cgi/edithtml.py:76 msgid "List name is required." msgstr "" #: Mailman/Cgi/edithtml.py:154 msgid "%(realname)s -- Edit html for %(template_info)s" msgstr "" #: Mailman/Cgi/edithtml.py:160 msgid "Edit HTML : Error" msgstr "" #: Mailman/Cgi/edithtml.py:161 msgid "%(safetemplatename)s: Invalid template" msgstr "" #: Mailman/Cgi/edithtml.py:166 Mailman/Cgi/edithtml.py:167 msgid "%(realname)s -- HTML Page Editing" msgstr "" #: Mailman/Cgi/edithtml.py:168 msgid "Select page to edit:" msgstr "" #: Mailman/Cgi/edithtml.py:201 msgid "View or edit the list configuration information." msgstr "" #: Mailman/Cgi/edithtml.py:215 msgid "Edit this template for" msgstr "" #: Mailman/Cgi/edithtml.py:225 msgid "When you are done making changes..." msgstr "" #: Mailman/Cgi/edithtml.py:228 msgid "Submit Changes" msgstr "" #: Mailman/Cgi/edithtml.py:237 msgid "Can't have empty html page." msgstr "" #: Mailman/Cgi/edithtml.py:238 msgid "HTML Unchanged." msgstr "" #: Mailman/Cgi/edithtml.py:244 msgid "" "The page you saved contains suspicious HTML that could\n" "potentially expose your users to cross-site scripting attacks. This change\n" "has therefore been rejected. If you still want to make these changes, you\n" "must have shell access to your Mailman server.\n" " " msgstr "" #: Mailman/Cgi/edithtml.py:249 msgid "See " msgstr "" #: Mailman/Cgi/edithtml.py:252 msgid "FAQ 4.48." msgstr "" #: Mailman/Cgi/edithtml.py:253 msgid "Page Unchanged." msgstr "" #: Mailman/Cgi/edithtml.py:271 msgid "HTML successfully updated." msgstr "" #: Mailman/Cgi/listinfo.py:89 msgid "%(hostname)s Mailing Lists" msgstr "" #: Mailman/Cgi/listinfo.py:127 msgid "" "

    There currently are no publicly-advertised\n" " %(mailmanlink)s mailing lists on %(hostname)s." msgstr "" #: Mailman/Cgi/listinfo.py:131 msgid "" "

    Below is a listing of all the public mailing lists on\n" " %(hostname)s. Click on a list name to get more information about\n" " the list, or to subscribe, unsubscribe, and change the preferences\n" " on your subscription." msgstr "" #: Mailman/Cgi/listinfo.py:137 msgid "right" msgstr "" #: Mailman/Cgi/listinfo.py:140 msgid "" " To visit the general information page for an unadvertised list,\n" " open a URL similar to this one, but with a '/' and the %(adj)s\n" " list name appended.\n" "

    List administrators, you can visit " msgstr "" #: Mailman/Cgi/listinfo.py:145 msgid "the list admin overview page" msgstr "" #: Mailman/Cgi/listinfo.py:146 msgid "" " to find the management interface for your list.\n" "

    If you are having trouble using the lists, please contact " msgstr "" #: Mailman/Cgi/listinfo.py:223 msgid "" "Please answer the following question to prove that\n" " you are not a bot:" msgstr "" #: Mailman/Cgi/listinfo.py:253 msgid "Edit Options" msgstr "" #: Mailman/Cgi/listinfo.py:260 Mailman/Cgi/options.py:975 #: Mailman/Cgi/roster.py:137 msgid "View this page in" msgstr "" #: Mailman/Cgi/listinfo.py:266 msgid "This form requires JavaScript." msgstr "" #: Mailman/Cgi/options.py:68 Mailman/Cgi/options.py:81 #: Mailman/Cgi/options.py:98 msgid "CGI script error" msgstr "" #: Mailman/Cgi/options.py:71 msgid "Invalid request method: %(method)s" msgstr "" #: Mailman/Cgi/options.py:155 msgid "No address given" msgstr "" #: Mailman/Cgi/options.py:176 msgid "Illegal Email Address" msgstr "" #: Mailman/Cgi/options.py:183 Mailman/Cgi/options.py:240 #: Mailman/Cgi/options.py:264 msgid "No such member: %(safeuser)s." msgstr "" #: Mailman/Cgi/options.py:208 msgid "If you are a list member, a confirmation email has been sent." msgstr "" #: Mailman/Cgi/options.py:209 Mailman/Cgi/subscribe.py:296 #: Mailman/Commands/cmd_subscribe.py:133 #: Mailman/Commands/cmd_unsubscribe.py:80 msgid "You already have a subscription pending confirmation" msgstr "" #: Mailman/Cgi/options.py:210 msgid "" "If you are a list member, your unsubscription request has been\n" " forwarded to the list administrator for approval." msgstr "" #: Mailman/Cgi/options.py:254 msgid "" "If you are a list member,\n" " your password has been emailed to you." msgstr "" #: Mailman/Cgi/options.py:297 msgid "Authentication failed." msgstr "" #: Mailman/Cgi/options.py:365 msgid "A reminder of your password has been emailed to you." msgstr "" #: Mailman/Cgi/options.py:372 msgid "" "The list administrator may not view the other\n" " subscriptions for this user." msgstr "" #: Mailman/Cgi/options.py:373 Mailman/Cgi/options.py:422 #: Mailman/Cgi/options.py:550 Mailman/Cgi/options.py:775 msgid "Note: " msgstr "" #: Mailman/Cgi/options.py:378 msgid "List subscriptions for %(safeuser)s on %(hostname)s" msgstr "" #: Mailman/Cgi/options.py:381 msgid "" "Click on a link to visit your options page for the\n" " requested mailing list." msgstr "" #: Mailman/Cgi/options.py:419 msgid "" "The list administrator may not change the names\n" " or addresses for this user's other subscriptions. However, the\n" " subscription for this mailing list has been changed." msgstr "" #: Mailman/Cgi/options.py:442 msgid "Addresses did not match!" msgstr "" #: Mailman/Cgi/options.py:447 msgid "You are already using that email address" msgstr "" #: Mailman/Cgi/options.py:459 msgid "" "The new address you requested %(newaddr)s is already a member of the\n" "%(listname)s mailing list, however you have also requested a global change of\n" "address. Upon confirmation, any other mailing list containing the address\n" "%(safeuser)s will be changed. " msgstr "" #: Mailman/Cgi/options.py:468 msgid "The new address is already a member: %(newaddr)s" msgstr "" #: Mailman/Cgi/options.py:474 msgid "Addresses may not be blank" msgstr "" #: Mailman/Cgi/options.py:488 msgid "A confirmation message has been sent to %(newaddr)s. " msgstr "" #: Mailman/Cgi/options.py:497 msgid "Bad email address provided" msgstr "" #: Mailman/Cgi/options.py:499 msgid "Illegal email address provided" msgstr "" #: Mailman/Cgi/options.py:501 msgid "%(newaddr)s is already a member of the list." msgstr "" #: Mailman/Cgi/options.py:504 msgid "" "%(newaddr)s is banned from this list. If you\n" " think this restriction is erroneous, please contact\n" " the list owners at %(owneraddr)s." msgstr "" #: Mailman/Cgi/options.py:515 msgid "Member name successfully changed. " msgstr "" #: Mailman/Cgi/options.py:525 msgid "" "The list administrator may not change the\n" " password for a user." msgstr "" #: Mailman/Cgi/options.py:534 msgid "Passwords may not be blank" msgstr "" #: Mailman/Cgi/options.py:539 msgid "Passwords did not match!" msgstr "" #: Mailman/Cgi/options.py:547 msgid "" "The list administrator may not change the\n" " password for this user's other subscriptions. However, the\n" " password for this mailing list has been changed." msgstr "" #: Mailman/Cgi/options.py:564 Mailman/Commands/cmd_password.py:83 #: Mailman/Commands/cmd_password.py:109 msgid "Password successfully changed." msgstr "" #: Mailman/Cgi/options.py:573 msgid "" "You must confirm your unsubscription request by turning\n" " on the checkbox below the Unsubscribe button. You\n" " have not been unsubscribed!" msgstr "" #: Mailman/Cgi/options.py:594 msgid "via the member options page" msgstr "" #: Mailman/Cgi/options.py:614 msgid "Unsubscription results" msgstr "" #: Mailman/Cgi/options.py:618 msgid "" "Your unsubscription request has been received and\n" " forwarded on to the list moderators for approval. You will\n" " receive notification once the list moderators have made their\n" " decision." msgstr "" #: Mailman/Cgi/options.py:623 msgid "" "You have been successfully unsubscribed from the\n" " mailing list %(fqdn_listname)s. If you were receiving digest\n" " deliveries you may get one more digest. If you have any questions\n" " about your unsubscription, please contact the list owners at\n" " %(owneraddr)s." msgstr "" #: Mailman/Cgi/options.py:772 msgid "" "The list administrator may not change the\n" " options for this user's other subscriptions. However the\n" " options for this mailing list subscription has been\n" " changed." msgstr "" #: Mailman/Cgi/options.py:782 msgid "" "The list administrator has disabled digest delivery for\n" " this list, so your delivery option has not been set. However your\n" " other options have been set successfully." msgstr "" #: Mailman/Cgi/options.py:786 msgid "" "The list administrator has disabled non-digest delivery\n" " for this list, so your delivery option has not been set. However\n" " your other options have been set successfully." msgstr "" #: Mailman/Cgi/options.py:790 msgid "You have successfully set your options." msgstr "" #: Mailman/Cgi/options.py:793 msgid "You may get one last digest." msgstr "" #: Mailman/Cgi/options.py:865 msgid "Yes, I really want to unsubscribe" msgstr "" #: Mailman/Cgi/options.py:869 msgid "Change My Password" msgstr "" #: Mailman/Cgi/options.py:872 msgid "List my other subscriptions" msgstr "" #: Mailman/Cgi/options.py:879 msgid "Email My Password To Me" msgstr "" #: Mailman/Cgi/options.py:881 msgid "password" msgstr "" #: Mailman/Cgi/options.py:883 msgid "Log out" msgstr "" #: Mailman/Cgi/options.py:885 msgid "Submit My Changes" msgstr "" #: Mailman/Cgi/options.py:897 msgid "days" msgstr "" #: Mailman/Cgi/options.py:899 msgid "day" msgstr "" #: Mailman/Cgi/options.py:900 msgid "%(days)d %(units)s" msgstr "" #: Mailman/Cgi/options.py:906 msgid "Change My Address and Name" msgstr "" #: Mailman/Cgi/options.py:932 msgid "No topics defined" msgstr "" #: Mailman/Cgi/options.py:940 msgid "" "\n" "You are subscribed to this list with the case-preserved address\n" "%(cpuser)s." msgstr "" #: Mailman/Cgi/options.py:956 msgid "%(realname)s list: member options login page" msgstr "" #: Mailman/Cgi/options.py:957 msgid "email address and " msgstr "" #: Mailman/Cgi/options.py:960 msgid "%(realname)s list: member options for user %(safeuser)s" msgstr "" #: Mailman/Cgi/options.py:986 msgid "" "In order to change your membership option, you must\n" " first log in by giving your %(extra)smembership password in the section\n" " below. If you don't remember your membership password, you can have it\n" " emailed to you by clicking on the button below. If you just want to\n" " unsubscribe from this list, click on the Unsubscribe button and a\n" " confirmation message will be sent to you.\n" "\n" "

    Important: From this point on, you must have\n" " cookies enabled in your browser, otherwise none of your changes will take\n" " effect.\n" " " msgstr "" #: Mailman/Cgi/options.py:1000 msgid "Email address:" msgstr "" #: Mailman/Cgi/options.py:1004 msgid "Password:" msgstr "" #: Mailman/Cgi/options.py:1006 msgid "Log in" msgstr "" #: Mailman/Cgi/options.py:1014 msgid "" "By clicking on the Unsubscribe button, a\n" " confirmation message will be emailed to you. This message will have a\n" " link that you should click on to complete the removal process (you can\n" " also confirm by email; see the instructions in the confirmation\n" " message)." msgstr "" #: Mailman/Cgi/options.py:1022 msgid "Password reminder" msgstr "" #: Mailman/Cgi/options.py:1026 msgid "" "By clicking on the Remind button, your\n" " password will be emailed to you." msgstr "" #: Mailman/Cgi/options.py:1029 msgid "Remind" msgstr "" #: Mailman/Cgi/options.py:1129 Mailman/ListAdmin.py:227 msgid "" msgstr "" #: Mailman/Cgi/options.py:1140 msgid "Requested topic is not valid: %(topicname)s" msgstr "" #: Mailman/Cgi/options.py:1145 msgid "Topic filter details" msgstr "" #: Mailman/Cgi/options.py:1148 msgid "Name:" msgstr "" #: Mailman/Cgi/options.py:1150 msgid "Pattern (as regexp):" msgstr "" #: Mailman/Cgi/private.py:64 msgid "Private Archive Error" msgstr "" #: Mailman/Cgi/private.py:65 msgid "You must specify a list." msgstr "" #: Mailman/Cgi/private.py:72 msgid "Private archive - \"./\" and \"../\" not allowed in URL." msgstr "" #: Mailman/Cgi/private.py:109 msgid "Private Archive Error - %(msg)s" msgstr "" #: Mailman/Cgi/private.py:157 msgid "" "If you are a list member,\n" " your password has been emailed to you." msgstr "" #: Mailman/Cgi/private.py:161 msgid "Please enter your email address" msgstr "" #: Mailman/Cgi/private.py:218 msgid "Private archive file not found" msgstr "" #: Mailman/Cgi/rmlist.py:76 msgid "No such list %(safelistname)s" msgstr "" #: Mailman/Cgi/rmlist.py:94 msgid "You're being a sneaky list owner!" msgstr "" #: Mailman/Cgi/rmlist.py:139 msgid "You are not authorized to delete this mailing list" msgstr "" #: Mailman/Cgi/rmlist.py:180 msgid "Mailing list deletion results" msgstr "" #: Mailman/Cgi/rmlist.py:187 msgid "" "You have successfully deleted the mailing list\n" " %(listname)s." msgstr "" #: Mailman/Cgi/rmlist.py:191 msgid "" "There were some problems deleting the mailing list\n" " %(listname)s. Contact your site administrator at %(sitelist)s\n" " for details." msgstr "" #: Mailman/Cgi/rmlist.py:208 msgid "Permanently remove mailing list %(realname)s" msgstr "" #: Mailman/Cgi/rmlist.py:209 msgid "Permanently remove mailing list %(realname)s" msgstr "" #: Mailman/Cgi/rmlist.py:222 msgid "" "This page allows you as the list owner, to permanently\n" " remove this mailing list from the system. This action is not\n" " undoable so you should undertake it only if you are absolutely\n" " sure this mailing list has served its purpose and is no longer necessary.\n" "\n" "

    Note that no warning will be sent to your list members and after this\n" " action, any subsequent messages sent to the mailing list, or any of its\n" " administrative addreses will bounce.\n" "\n" "

    You also have the option of removing the archives for this mailing list\n" " at this time. It is almost always recommended that you do\n" " not remove the archives, since they serve as the\n" " historical record of your mailing list.\n" "\n" "

    For your safety, you will be asked to reconfirm the list password.\n" " " msgstr "" #: Mailman/Cgi/rmlist.py:243 msgid "List password:" msgstr "" #: Mailman/Cgi/rmlist.py:247 msgid "Also delete archives?" msgstr "" #: Mailman/Cgi/rmlist.py:255 msgid "Cancel and return to list administration" msgstr "" #: Mailman/Cgi/rmlist.py:258 msgid "Delete this list" msgstr "" #: Mailman/Cgi/roster.py:48 Mailman/Cgi/subscribe.py:56 msgid "Invalid options to CGI script" msgstr "" #: Mailman/Cgi/roster.py:118 msgid "%(realname)s roster authentication failed." msgstr "" #: Mailman/Cgi/subscribe.py:128 msgid "You must supply a valid email address." msgstr "" #: Mailman/Cgi/subscribe.py:153 msgid "reCAPTCHA validation failed: %(e_codes)s" msgstr "" #: Mailman/Cgi/subscribe.py:156 msgid "reCAPTCHA could not be validated: %(e_reason)s" msgstr "" #: Mailman/Cgi/subscribe.py:183 msgid "The form is too old. Please GET it again." msgstr "" #: Mailman/Cgi/subscribe.py:186 msgid "Please take a few seconds to fill out the form before submitting it." msgstr "" #: Mailman/Cgi/subscribe.py:189 msgid "The hidden token didn't match. Did your IP change?" msgstr "" #: Mailman/Cgi/subscribe.py:192 msgid "There was no hidden token in your submission or it was corrupted." msgstr "" #: Mailman/Cgi/subscribe.py:193 msgid "You must GET the form before submitting it." msgstr "" #: Mailman/Cgi/subscribe.py:199 msgid "This was not the right answer to the CAPTCHA question." msgstr "" #: Mailman/Cgi/subscribe.py:204 msgid "You may not subscribe a list to itself!" msgstr "" #: Mailman/Cgi/subscribe.py:212 msgid "If you supply a password, you must confirm it." msgstr "" #: Mailman/Cgi/subscribe.py:214 msgid "Your passwords did not match." msgstr "" #: Mailman/Cgi/subscribe.py:248 msgid "" "Your subscription request has been received, and will soon be acted upon.\n" "Depending on the configuration of this mailing list, your subscription request\n" "may have to be first confirmed by you via email, or approved by the list\n" "moderator. If confirmation is required, you will soon get a confirmation\n" "email which contains further instructions." msgstr "" #: Mailman/Cgi/subscribe.py:262 msgid "" "The email address you supplied is banned from this\n" " mailing list. If you think this restriction is erroneous, please\n" " contact the list owners at %(listowner)s." msgstr "" #: Mailman/Cgi/subscribe.py:266 msgid "" "The email address you supplied is not valid. (E.g. it must contain an\n" "`@'.)" msgstr "" #: Mailman/Cgi/subscribe.py:270 msgid "" "Your subscription is not allowed because the email address you gave is\n" "insecure." msgstr "" #: Mailman/Cgi/subscribe.py:278 msgid "" "Confirmation from your email address is required, to prevent anyone from\n" "subscribing you without permission. Instructions are being sent to you at\n" "%(email)s. Please note your subscription will not start until you confirm\n" "your subscription." msgstr "" #: Mailman/Cgi/subscribe.py:290 msgid "" "Your subscription request was deferred because %(x)s. Your request has been\n" "forwarded to the list moderator. You will receive email informing you of the\n" "moderator's decision when they get to your request." msgstr "" #: Mailman/Cgi/subscribe.py:300 Mailman/Commands/cmd_confirm.py:61 msgid "You are already subscribed." msgstr "" #: Mailman/Cgi/subscribe.py:315 msgid "Mailman privacy alert" msgstr "" #: Mailman/Cgi/subscribe.py:316 msgid "" "An attempt was made to subscribe your address to the mailing list\n" "%(listaddr)s. You are already subscribed to this mailing list.\n" "\n" "Note that the list membership is not public, so it is possible that a bad\n" "person was trying to probe the list for its membership. This would be a\n" "privacy violation if we let them do this, but we didn't.\n" "\n" "If you submitted the subscription request and forgot that you were already\n" "subscribed to the list, then you can ignore this message. If you suspect that\n" "an attempt is being made to covertly discover whether you are a member of this\n" "list, and you are worried about your privacy, then feel free to send a message\n" "to the list administrator at %(listowner)s.\n" msgstr "" #: Mailman/Cgi/subscribe.py:335 msgid "This list does not support digest delivery." msgstr "" #: Mailman/Cgi/subscribe.py:337 msgid "This list only supports digest delivery." msgstr "" #: Mailman/Cgi/subscribe.py:344 msgid "You have been successfully subscribed to the %(realname)s mailing list." msgstr "" #: Mailman/Commands/cmd_confirm.py:18 #, docstring msgid "" "\n" " confirm \n" " Confirm an action. The confirmation-string is required and should be\n" " supplied by a mailback confirmation notice.\n" msgstr "" #: Mailman/Commands/cmd_confirm.py:41 Mailman/Commands/cmd_lists.py:40 #: Mailman/Commands/cmd_set.py:133 Mailman/Commands/cmd_subscribe.py:69 #: Mailman/Commands/cmd_unsubscribe.py:52 Mailman/Commands/cmd_who.py:67 msgid "Usage:" msgstr "" #: Mailman/Commands/cmd_confirm.py:50 msgid "" "Invalid confirmation string. Note that confirmation strings expire\n" "approximately %(days)s days after the initial request. They also expire if\n" "the request has already been handled in some way. If your confirmation has\n" "expired, please try to re-submit your original request or message." msgstr "" #: Mailman/Commands/cmd_confirm.py:56 msgid "Your request has been forwarded to the list moderator for approval." msgstr "" #: Mailman/Commands/cmd_confirm.py:64 msgid "" "You are not currently a member. Have you already unsubscribed or changed\n" "your email address?" msgstr "" #: Mailman/Commands/cmd_confirm.py:69 msgid "" "You are currently banned from subscribing to this list. If you think this\n" "restriction is erroneous, please contact the list owners at\n" "%(owneraddr)s." msgstr "" #: Mailman/Commands/cmd_confirm.py:74 msgid "" "You were not invited to this mailing list. The invitation has been discarded,\n" "and both list administrators have been alerted." msgstr "" #: Mailman/Commands/cmd_confirm.py:78 msgid "Bad approval password given. Held message is still being held." msgstr "" #: Mailman/Commands/cmd_confirm.py:89 Mailman/Commands/cmd_confirm.py:92 #: Mailman/Commands/cmd_confirm.py:95 msgid "Confirmation succeeded" msgstr "" #: Mailman/Commands/cmd_echo.py:17 #, docstring msgid "" "\n" " echo [args]\n" " Simply echo an acknowledgement. Args are echoed back unchanged.\n" msgstr "" #: Mailman/Commands/cmd_end.py:17 #, docstring msgid "" "\n" " end\n" " Stop processing commands. Use this if your mail program automatically\n" " adds a signature file.\n" msgstr "" #: Mailman/Commands/cmd_help.py:17 #, docstring msgid "" "\n" " help\n" " Print this help message.\n" msgstr "" #: Mailman/Commands/cmd_help.py:47 msgid "You can access your personal options via the following url:" msgstr "" #: Mailman/Commands/cmd_info.py:17 #, docstring msgid "" "\n" " info\n" " Get information about this mailing list.\n" msgstr "" #: Mailman/Commands/cmd_info.py:39 Mailman/Commands/cmd_lists.py:62 msgid "n/a" msgstr "" #: Mailman/Commands/cmd_info.py:44 msgid "List name: %(listname)s" msgstr "" #: Mailman/Commands/cmd_info.py:45 msgid "Description: %(description)s" msgstr "" #: Mailman/Commands/cmd_info.py:46 msgid "Postings to: %(postaddr)s" msgstr "" #: Mailman/Commands/cmd_info.py:47 msgid "List Helpbot: %(requestaddr)s" msgstr "" #: Mailman/Commands/cmd_info.py:48 msgid "List Owners: %(owneraddr)s" msgstr "" #: Mailman/Commands/cmd_info.py:49 msgid "More information: %(listurl)s" msgstr "" #: Mailman/Commands/cmd_join.py:17 #, docstring msgid "" "The `join' command is synonymous with `subscribe'.\n" msgstr "" #: Mailman/Commands/cmd_leave.py:17 #, docstring msgid "" "The `leave' command is synonymous with `unsubscribe'.\n" msgstr "" #: Mailman/Commands/cmd_lists.py:17 #, docstring msgid "" "\n" " lists\n" " See a list of the public mailing lists on this GNU Mailman server.\n" msgstr "" #: Mailman/Commands/cmd_lists.py:44 msgid "Public mailing lists at %(hostname)s:" msgstr "" #: Mailman/Commands/cmd_lists.py:66 msgid "%(i)3d. List name: %(realname)s" msgstr "" #: Mailman/Commands/cmd_lists.py:67 msgid " Description: %(description)s" msgstr "" #: Mailman/Commands/cmd_lists.py:68 msgid " Requests to: %(requestaddr)s" msgstr "" #: Mailman/Commands/cmd_password.py:17 #, docstring msgid "" "\n" " password [ ] [address=

    ]\n" " Retrieve or change your password. With no arguments, this returns\n" " your current password. With arguments and \n" " you can change your password.\n" "\n" " If you're posting from an address other than your membership address,\n" " specify your membership address with `address=
    ' (no brackets\n" " around the email address, and no quotes!). Note that in this case the\n" " response is always sent to the subscribed address.\n" msgstr "" #: Mailman/Commands/cmd_password.py:51 Mailman/Commands/cmd_password.py:66 msgid "Your password is: %(password)s" msgstr "" #: Mailman/Commands/cmd_password.py:57 Mailman/Commands/cmd_password.py:72 #: Mailman/Commands/cmd_password.py:95 Mailman/Commands/cmd_password.py:121 #: Mailman/Commands/cmd_set.py:149 Mailman/Commands/cmd_set.py:219 msgid "You are not a member of the %(listname)s mailing list" msgstr "" #: Mailman/Commands/cmd_password.py:85 Mailman/Commands/cmd_password.py:111 msgid "" "You did not give the correct old password, so your password has not been\n" "changed. Use the no argument version of the password command to retrieve your\n" "current password, then try again." msgstr "" #: Mailman/Commands/cmd_password.py:89 Mailman/Commands/cmd_password.py:115 msgid "" "\n" "Usage:" msgstr "" #: Mailman/Commands/cmd_remove.py:17 #, docstring msgid "" "The `remove' command is synonymous with `unsubscribe'.\n" msgstr "" #: Mailman/Commands/cmd_set.py:26 msgid "" "\n" " set ...\n" " Set or view your membership options.\n" "\n" " Use `set help' (without the quotes) to get a more detailed list of the\n" " options you can change.\n" "\n" " Use `set show' (without the quotes) to view your current option\n" " settings.\n" msgstr "" #: Mailman/Commands/cmd_set.py:37 msgid "" "\n" " set help\n" " Show this detailed help.\n" "\n" " set show [address=
    ]\n" " View your current option settings. If you're posting from an address\n" " other than your membership address, specify your membership address\n" " with `address=
    ' (no brackets around the email address, and no\n" " quotes!).\n" "\n" " set authenticate [address=
    ]\n" " To set any of your options, you must include this command first, along\n" " with your membership password. If you're posting from an address\n" " other than your membership address, specify your membership address\n" " with `address=
    ' (no brackets around the email address, and no\n" " quotes!).\n" "\n" " set ack on\n" " set ack off\n" " When the `ack' option is turned on, you will receive an\n" " acknowledgement message whenever you post a message to the list.\n" "\n" " set digest plain\n" " set digest mime\n" " set digest off\n" " When the `digest' option is turned off, you will receive postings\n" " immediately when they are posted. Use `set digest plain' if instead\n" " you want to receive postings bundled into a plain text digest\n" " (i.e. RFC 1153 digest). Use `set digest mime' if instead you want to\n" " receive postings bundled together into a MIME digest.\n" "\n" " set delivery on\n" " set delivery off\n" " Turn delivery on or off. This does not unsubscribe you, but instead\n" " tells Mailman not to deliver messages to you for now. This is useful\n" " if you're going on vacation. Be sure to use `set delivery on' when\n" " you return from vacation!\n" "\n" " set myposts on\n" " set myposts off\n" " Use `set myposts off' to not receive copies of messages you post to\n" " the list. This has no effect if you're receiving digests.\n" "\n" " set hide on\n" " set hide off\n" " Use `set hide on' to conceal your email address when people request\n" " the membership list.\n" "\n" " set duplicates on\n" " set duplicates off\n" " Use `set duplicates off' if you want Mailman to not send you messages\n" " if your address is explicitly mentioned in the To: or Cc: fields of\n" " the message. This can reduce the number of duplicate postings you\n" " will receive.\n" "\n" " set reminders on\n" " set reminders off\n" " Use `set reminders off' if you want to disable the monthly password\n" " reminder for this mailing list.\n" msgstr "" #: Mailman/Commands/cmd_set.py:122 msgid "Bad set command: %(subcmd)s" msgstr "" #: Mailman/Commands/cmd_set.py:151 msgid "Your current option settings:" msgstr "" #: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191 #: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198 #: Mailman/Commands/cmd_set.py:202 msgid "off" msgstr "" #: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191 #: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198 #: Mailman/Commands/cmd_set.py:202 msgid "on" msgstr "" #: Mailman/Commands/cmd_set.py:154 msgid " ack %(onoff)s" msgstr "" #: Mailman/Commands/cmd_set.py:160 msgid " digest plain" msgstr "" #: Mailman/Commands/cmd_set.py:162 msgid " digest mime" msgstr "" #: Mailman/Commands/cmd_set.py:164 msgid " digest off" msgstr "" #: Mailman/Commands/cmd_set.py:169 msgid "delivery on" msgstr "" #: Mailman/Commands/cmd_set.py:171 Mailman/Commands/cmd_set.py:174 #: Mailman/Commands/cmd_set.py:177 Mailman/Commands/cmd_set.py:181 msgid "delivery off" msgstr "" #: Mailman/Commands/cmd_set.py:172 msgid "by you" msgstr "" #: Mailman/Commands/cmd_set.py:175 msgid "by the admin" msgstr "" #: Mailman/Commands/cmd_set.py:178 msgid "due to bounces" msgstr "" #: Mailman/Commands/cmd_set.py:186 msgid " %(status)s (%(how)s on %(date)s)" msgstr "" #: Mailman/Commands/cmd_set.py:192 msgid " myposts %(onoff)s" msgstr "" #: Mailman/Commands/cmd_set.py:195 msgid " hide %(onoff)s" msgstr "" #: Mailman/Commands/cmd_set.py:199 msgid " duplicates %(onoff)s" msgstr "" #: Mailman/Commands/cmd_set.py:203 msgid " reminders %(onoff)s" msgstr "" #: Mailman/Commands/cmd_set.py:224 msgid "You did not give the correct password" msgstr "" #: Mailman/Commands/cmd_set.py:236 Mailman/Commands/cmd_set.py:283 msgid "Bad argument: %(arg)s" msgstr "" #: Mailman/Commands/cmd_set.py:241 Mailman/Commands/cmd_set.py:261 msgid "Not authenticated" msgstr "" #: Mailman/Commands/cmd_set.py:254 msgid "ack option set" msgstr "" #: Mailman/Commands/cmd_set.py:286 msgid "digest option set" msgstr "" #: Mailman/Commands/cmd_set.py:301 msgid "delivery enabled" msgstr "" #: Mailman/Commands/cmd_set.py:304 msgid "delivery disabled by user" msgstr "" #: Mailman/Commands/cmd_set.py:316 msgid "myposts option set" msgstr "" #: Mailman/Commands/cmd_set.py:327 msgid "hide option set" msgstr "" #: Mailman/Commands/cmd_set.py:339 msgid "duplicates option set" msgstr "" #: Mailman/Commands/cmd_set.py:351 msgid "reminder option set" msgstr "" #: Mailman/Commands/cmd_stop.py:17 #, docstring msgid "" "stop is synonymous with the end command.\n" msgstr "" #: Mailman/Commands/cmd_subscribe.py:17 #, docstring msgid "" "\n" " subscribe [password] [digest|nodigest] [address=
    ]\n" " Subscribe to this mailing list. Your password must be given to\n" " unsubscribe or change your options, but if you omit the password, one\n" " will be generated for you. You may be periodically reminded of your\n" " password.\n" "\n" " The next argument may be either: `nodigest' or `digest' (no quotes!).\n" " If you wish to subscribe an address other than the address you sent\n" " this request from, you may specify `address=
    ' (no brackets\n" " around the email address, and no quotes!)\n" msgstr "" #: Mailman/Commands/cmd_subscribe.py:62 msgid "Bad digest specifier: %(arg)s" msgstr "" #: Mailman/Commands/cmd_subscribe.py:92 msgid "No valid address found to subscribe" msgstr "" #: Mailman/Commands/cmd_subscribe.py:113 msgid "" "The email address you supplied is banned from this mailing list.\n" "If you think this restriction is erroneous, please contact the list\n" "owners at %(listowner)s." msgstr "" #: Mailman/Commands/cmd_subscribe.py:119 msgid "" "Mailman won't accept the given email address as a valid address.\n" "(E.g. it must have an @ in it.)" msgstr "" #: Mailman/Commands/cmd_subscribe.py:124 msgid "" "Your subscription is not allowed because\n" "the email address you gave is insecure." msgstr "" #: Mailman/Commands/cmd_subscribe.py:129 msgid "You are already subscribed!" msgstr "" #: Mailman/Commands/cmd_subscribe.py:137 msgid "No one can subscribe to the digest of this list!" msgstr "" #: Mailman/Commands/cmd_subscribe.py:140 msgid "This list only supports digest subscriptions!" msgstr "" #: Mailman/Commands/cmd_subscribe.py:146 msgid "" "Your subscription request has been forwarded to the list administrator\n" "at %(listowner)s for review." msgstr "" #: Mailman/Commands/cmd_subscribe.py:151 msgid "Subscription request succeeded." msgstr "" #: Mailman/Commands/cmd_unsubscribe.py:17 #, docstring msgid "" "\n" " unsubscribe [password] [address=
    ]\n" " Unsubscribe from the mailing list. If given, your password must match\n" " your current password. If omitted, a confirmation email will be sent\n" " to the unsubscribing address. If you wish to unsubscribe an address\n" " other than the address you sent this request from, you may specify\n" " `address=
    ' (no brackets around the email address, and no\n" " quotes!)\n" msgstr "" #: Mailman/Commands/cmd_unsubscribe.py:62 msgid "%(address)s is not a member of the %(listname)s mailing list" msgstr "" #: Mailman/Commands/cmd_unsubscribe.py:69 msgid "" "Your unsubscription request has been forwarded to the list administrator for\n" "approval." msgstr "" #: Mailman/Commands/cmd_unsubscribe.py:89 msgid "You gave the wrong password" msgstr "" #: Mailman/Commands/cmd_unsubscribe.py:92 msgid "Unsubscription request succeeded." msgstr "" #: Mailman/Commands/cmd_who.py:27 msgid "" "\n" " who\n" " See the non-hidden members of this mailing list.\n" " who password\n" " See everyone who is on this mailing list. The password is the\n" " list's admin or moderator password.\n" msgstr "" #: Mailman/Commands/cmd_who.py:35 msgid "" "\n" " who password [address=
    ]\n" " See the non-hidden members of this mailing list. The roster is\n" " limited to list members only, and you must supply your membership\n" " password to retrieve it. If you're posting from an address other\n" " than your membership address, specify your membership address with\n" " `address=
    ' (no brackets around the email address, and no\n" " quotes!). If you provide the list's admin or moderator password,\n" " hidden members will be included.\n" msgstr "" #: Mailman/Commands/cmd_who.py:46 msgid "" "\n" " who password\n" " See everyone who is on this mailing list. The roster is limited to\n" " list administrators and moderators only; you must supply the list\n" " admin or moderator password to retrieve the roster.\n" msgstr "" #: Mailman/Commands/cmd_who.py:128 msgid "You are not allowed to retrieve the list membership." msgstr "" #: Mailman/Commands/cmd_who.py:134 msgid "This list has no members." msgstr "" #: Mailman/Commands/cmd_who.py:148 msgid "Non-digest (regular) members:" msgstr "" #: Mailman/Commands/cmd_who.py:151 msgid "Digest members:" msgstr "" #: Mailman/Defaults.py:1802 msgid "Arabic" msgstr "" #: Mailman/Defaults.py:1803 msgid "Asturian" msgstr "" #: Mailman/Defaults.py:1804 msgid "Catalan" msgstr "" #: Mailman/Defaults.py:1805 msgid "Czech" msgstr "" #: Mailman/Defaults.py:1806 msgid "Danish" msgstr "" #: Mailman/Defaults.py:1807 msgid "German" msgstr "" #: Mailman/Defaults.py:1808 msgid "English (USA)" msgstr "" #: Mailman/Defaults.py:1809 msgid "Esperanto" msgstr "" #: Mailman/Defaults.py:1810 msgid "Spanish (Spain)" msgstr "" #: Mailman/Defaults.py:1811 msgid "Estonian" msgstr "" #: Mailman/Defaults.py:1812 msgid "Euskara" msgstr "" #: Mailman/Defaults.py:1813 msgid "Persian" msgstr "" #: Mailman/Defaults.py:1814 msgid "Finnish" msgstr "" #: Mailman/Defaults.py:1815 msgid "French" msgstr "" #: Mailman/Defaults.py:1816 msgid "Galician" msgstr "" #: Mailman/Defaults.py:1817 msgid "Greek" msgstr "" #: Mailman/Defaults.py:1818 msgid "Hebrew" msgstr "" #: Mailman/Defaults.py:1819 msgid "Croatian" msgstr "" #: Mailman/Defaults.py:1820 msgid "Hungarian" msgstr "" #: Mailman/Defaults.py:1821 msgid "Interlingua" msgstr "" #: Mailman/Defaults.py:1822 msgid "Italian" msgstr "" #: Mailman/Defaults.py:1823 msgid "Japanese" msgstr "" #: Mailman/Defaults.py:1824 msgid "Korean" msgstr "" #: Mailman/Defaults.py:1825 msgid "Lithuanian" msgstr "" #: Mailman/Defaults.py:1826 msgid "Dutch" msgstr "" #: Mailman/Defaults.py:1827 msgid "Norwegian" msgstr "" #: Mailman/Defaults.py:1828 msgid "Polish" msgstr "" #: Mailman/Defaults.py:1829 msgid "Portuguese" msgstr "" #: Mailman/Defaults.py:1830 msgid "Portuguese (Brazil)" msgstr "" #: Mailman/Defaults.py:1831 msgid "Romanian" msgstr "" #: Mailman/Defaults.py:1832 msgid "Russian" msgstr "" #: Mailman/Defaults.py:1833 msgid "Slovak" msgstr "" #: Mailman/Defaults.py:1834 msgid "Slovenian" msgstr "" #: Mailman/Defaults.py:1835 msgid "Serbian" msgstr "" #: Mailman/Defaults.py:1836 msgid "Swedish" msgstr "" #: Mailman/Defaults.py:1837 msgid "Turkish" msgstr "" #: Mailman/Defaults.py:1838 msgid "Ukrainian" msgstr "" #: Mailman/Defaults.py:1839 msgid "Vietnamese" msgstr "" #: Mailman/Defaults.py:1840 msgid "Chinese (China)" msgstr "" #: Mailman/Defaults.py:1841 msgid "Chinese (Taiwan)" msgstr "" #: Mailman/Deliverer.py:53 msgid "" "Note: Since this is a list of mailing lists, administrative\n" "notices like the password reminder will be sent to\n" "your membership administrative address, %(addr)s." msgstr "" #: Mailman/Deliverer.py:73 msgid " (Digest mode)" msgstr "" #: Mailman/Deliverer.py:79 msgid "Welcome to the \"%(realname)s\" mailing list%(digmode)s" msgstr "" #: Mailman/Deliverer.py:89 msgid "You have been unsubscribed from the %(realname)s mailing list" msgstr "" #: Mailman/Deliverer.py:116 msgid "%(listfullname)s mailing list reminder" msgstr "" #: Mailman/Deliverer.py:144 msgid "No reason given" msgstr "" #: Mailman/Deliverer.py:168 Mailman/Deliverer.py:187 msgid "Hostile subscription attempt detected" msgstr "" #: Mailman/Deliverer.py:169 msgid "" "%(address)s was invited to a different mailing\n" "list, but in a deliberate malicious attempt they tried to confirm the\n" "invitation to your list. We just thought you'd like to know. No further\n" "action by you is required." msgstr "" #: Mailman/Deliverer.py:188 msgid "" "You invited %(address)s to your list, but in a\n" "deliberate malicious attempt, they tried to confirm the invitation to a\n" "different list. We just thought you'd like to know. No further action by you\n" "is required." msgstr "" #: Mailman/Deliverer.py:221 msgid "%(listname)s mailing list probe message" msgstr "" #: Mailman/Errors.py:123 msgid "For some unknown reason" msgstr "" #: Mailman/Errors.py:129 Mailman/Errors.py:152 msgid "Your message was rejected" msgstr "" #: Mailman/Gui/Archive.py:25 msgid "Archiving Options" msgstr "" #: Mailman/Gui/Archive.py:31 msgid "List traffic archival policies." msgstr "" #: Mailman/Gui/Archive.py:34 msgid "Archive messages?" msgstr "" #: Mailman/Gui/Archive.py:36 msgid "private" msgstr "" #: Mailman/Gui/Archive.py:36 msgid "public" msgstr "" #: Mailman/Gui/Archive.py:37 msgid "Is archive file source for public or private archival?" msgstr "" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Monthly" msgstr "" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Quarterly" msgstr "" #: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78 msgid "Yearly" msgstr "" #: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79 msgid "Daily" msgstr "" #: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79 msgid "Weekly" msgstr "" #: Mailman/Gui/Archive.py:43 msgid "How often should a new archive volume be started?" msgstr "" #: Mailman/Gui/Autoresponse.py:31 msgid "Auto-responder" msgstr "" #: Mailman/Gui/Autoresponse.py:39 msgid "" "Auto-responder characteristics.

    \n" "\n" "In the text fields below, string interpolation is performed with\n" "the following key/value substitutions:\n" "

      \n" "
    • listname - gets the name of the mailing list\n" "
    • listurl - gets the list's listinfo URL\n" "
    • requestemail - gets the list's -request address\n" "
    • owneremail - gets the list's -owner address\n" "
    \n" "\n" "

    For each text field, you can either enter the text directly into the text\n" "box, or you can specify a file on your local system to upload as the text." msgstr "" #: Mailman/Gui/Autoresponse.py:55 msgid "" "Should Mailman send an auto-response to mailing list\n" " posters?" msgstr "" #: Mailman/Gui/Autoresponse.py:60 msgid "Auto-response text to send to mailing list posters." msgstr "" #: Mailman/Gui/Autoresponse.py:63 msgid "" "Should Mailman send an auto-response to emails sent to the\n" " -owner address?" msgstr "" #: Mailman/Gui/Autoresponse.py:68 msgid "Auto-response text to send to -owner emails." msgstr "" #: Mailman/Gui/Autoresponse.py:71 msgid "Yes, w/discard" msgstr "" #: Mailman/Gui/Autoresponse.py:71 msgid "Yes, w/forward" msgstr "" #: Mailman/Gui/Autoresponse.py:72 msgid "" "Should Mailman send an auto-response to emails sent to the\n" " -request address? If you choose yes, decide whether you want\n" " Mailman to discard the original email, or forward it on to the\n" " system as a normal mail command." msgstr "" #: Mailman/Gui/Autoresponse.py:79 msgid "Auto-response text to send to -request emails." msgstr "" #: Mailman/Gui/Autoresponse.py:82 msgid "" "Number of days between auto-responses to either the mailing\n" " list or -request/-owner address from the same poster. Set to\n" " zero (or negative) for no grace period (i.e. auto-respond to\n" " every message)." msgstr "" #: Mailman/Gui/Bounce.py:26 msgid "Bounce processing" msgstr "" #: Mailman/Gui/Bounce.py:32 msgid "" "These policies control the automatic bounce processing system\n" " in Mailman. Here's an overview of how it works.\n" "\n" "

    When a bounce is received, Mailman tries to extract two pieces\n" " of information from the message: the address of the member the\n" " message was intended for, and the severity of the problem causing\n" " the bounce. The severity can be either hard or\n" " soft meaning either a fatal error occurred, or a\n" " transient error occurred. When in doubt, a hard severity is used.\n" "\n" "

    If no member address can be extracted from the bounce, then the\n" " bounce is usually discarded. Otherwise, each member is assigned a\n" " bounce score and every time we encounter a bounce from\n" " this member we increment the score. Hard bounces increment by 1\n" " while soft bounces increment by 0.5. We only increment the bounce\n" " score once per day, so even if we receive ten hard bounces from a\n" " member per day, their score will increase by only 1 for that day.\n" "\n" "

    When a member's bounce score is greater than the\n" " bounce score\n" " threshold, the subscription is disabled. Once disabled, the\n" " member will not receive any postings from the list until their\n" " membership is explicitly re-enabled (either by the list\n" " administrator or the user). However, they will receive occasional\n" " reminders that their membership has been disabled, and these\n" " reminders will include information about how to re-enable their\n" " membership.\n" "\n" "

    You can control both the\n" " number\n" " of reminders the member will receive and the\n" " frequency with which these reminders are sent.\n" "\n" "

    There is one other important configuration variable; after a\n" " certain period of time -- during which no bounces from the member\n" " are received -- the bounce information is\n" " considered\n" " stale and discarded. Thus by adjusting this value, and the\n" " score threshold, you can control how quickly bouncing members are\n" " disabled. You should tune both of these to the frequency and\n" " traffic volume of your list." msgstr "" #: Mailman/Gui/Bounce.py:75 msgid "Bounce detection sensitivity" msgstr "" #: Mailman/Gui/Bounce.py:78 msgid "Should Mailman perform automatic bounce processing?" msgstr "" #: Mailman/Gui/Bounce.py:79 msgid "" "By setting this value to No, you disable all\n" " automatic bounce processing for this list, however bounce\n" " messages will still be discarded so that the list administrator\n" " isn't inundated with them." msgstr "" #: Mailman/Gui/Bounce.py:85 msgid "" "The maximum member bounce score before the member's\n" " subscription is disabled. This value can be a floating point\n" " number." msgstr "" #: Mailman/Gui/Bounce.py:88 msgid "" "Each subscriber is assigned a bounce score, as a floating\n" " point number. Whenever Mailman receives a bounce from a list\n" " member, that member's score is incremented. Hard bounces (fatal\n" " errors) increase the score by 1, while soft bounces (temporary\n" " errors) increase the score by 0.5. Only one bounce per day\n" " counts against a member's score, so even if 10 bounces are\n" " received for a member on the same day, their score will increase\n" " by just 1.\n" "\n" " This variable describes the upper limit for a member's bounce\n" " score, above which they are automatically disabled, but not\n" " removed from the mailing list." msgstr "" #: Mailman/Gui/Bounce.py:102 msgid "" "The number of days after which a member's bounce information\n" " is discarded, if no new bounces have been received in the\n" " interim. This value must be an integer." msgstr "" #: Mailman/Gui/Bounce.py:107 msgid "" "How many Your Membership Is Disabled warnings a\n" " disabled member should get before their address is removed from\n" " the mailing list. Set to 0 to immediately remove an address from\n" " the list once their bounce score exceeds the threshold. This\n" " value must be an integer." msgstr "" #: Mailman/Gui/Bounce.py:114 msgid "" "The number of days between sending the Your Membership\n" " Is Disabled warnings. This value must be an integer." msgstr "" #: Mailman/Gui/Bounce.py:117 Mailman/Gui/General.py:332 msgid "Notifications" msgstr "" #: Mailman/Gui/Bounce.py:121 msgid "" "Should Mailman send you, the list owner, any bounce messages\n" " that failed to be detected by the bounce processor? Yes\n" " is recommended." msgstr "" #: Mailman/Gui/Bounce.py:124 msgid "" "While Mailman's bounce detector is fairly robust, it's\n" " impossible to detect every bounce format in the world. You\n" " should keep this variable set to Yes for two reasons: 1)\n" " If this really is a permanent bounce from one of your members,\n" " you should probably manually remove them from your list, and 2)\n" " you might want to send the message on to the Mailman developers\n" " so that this new format can be added to its known set.\n" "\n" "

    If you really can't be bothered, then set this variable to\n" " No and all non-detected bounces will be discarded\n" " without further processing.\n" "\n" "

    Note: This setting will also affect all messages sent\n" " to your list's -admin address. This address is deprecated and\n" " should never be used, but some people may still send mail to this\n" " address. If this happens, and this variable is set to\n" " No those messages too will get discarded. You may want\n" " to set up an\n" " autoresponse\n" " message for email to the -owner and -admin address." msgstr "" #: Mailman/Gui/Bounce.py:147 msgid "" "Should Mailman notify you, the list owner, when bounces\n" " cause a member's bounce score to be incremented?" msgstr "" #: Mailman/Gui/Bounce.py:149 msgid "" "Setting this value to Yes will cause Mailman to\n" " send a notice including a copy of the bounce message to the list\n" " owners whenever a bounce increments a member's bounce score but\n" " doesn't cause a disable or a probe to be sent." msgstr "" #: Mailman/Gui/Bounce.py:156 msgid "" "Should Mailman notify you, the list owner, when bounces\n" " cause a member's subscription to be disabled?" msgstr "" #: Mailman/Gui/Bounce.py:158 msgid "" "By setting this value to No, you turn off\n" " notification messages that are normally sent to the list owners\n" " when a member's delivery is disabled due to excessive bounces.\n" " An attempt to notify the member will always be made." msgstr "" #: Mailman/Gui/Bounce.py:165 msgid "" "Should Mailman notify you, the list owner, when bounces\n" " cause a member to be unsubscribed?" msgstr "" #: Mailman/Gui/Bounce.py:167 msgid "" "By setting this value to No, you turn off\n" " notification messages that are normally sent to the list owners\n" " when a member is unsubscribed due to excessive bounces. An\n" " attempt to notify the member will always be made." msgstr "" #: Mailman/Gui/Bounce.py:194 msgid "" "Bad value for %(property)s: %(val)s" msgstr "" #: Mailman/Gui/ContentFilter.py:30 msgid "Content filtering" msgstr "" #: Mailman/Gui/ContentFilter.py:37 msgid "Forward to List Owner" msgstr "" #: Mailman/Gui/ContentFilter.py:39 msgid "Preserve" msgstr "" #: Mailman/Gui/ContentFilter.py:42 msgid "" "Policies concerning the content of list traffic.\n" "\n" "

    Content filtering works like this: when a message is\n" " received by the list and you have enabled content filtering, the\n" " individual attachments are first compared to the\n" " filter\n" " types. If the attachment type matches an entry in the filter\n" " types, it is discarded.\n" "\n" "

    Then, if there are pass types\n" " defined, any attachment type that does not match a\n" " pass type is also discarded. If there are no pass types defined,\n" " this check is skipped.\n" "\n" "

    After this initial filtering, any multipart\n" " attachments that are empty are removed. If the outer message is\n" " left empty after this filtering, then the whole message is\n" " discarded.\n" "\n" "

    Then, each multipart/alternative section will\n" " be replaced by just the first alternative that is non-empty after\n" " filtering if\n" " collapse_alternatives is enabled.\n" "\n" "

    Finally, any text/html parts that are left in the\n" " message may be converted to text/plain if\n" " convert_html_to_plaintext is enabled and the site is\n" " configured to allow these conversions." msgstr "" #: Mailman/Gui/ContentFilter.py:75 msgid "" "Should Mailman filter the content of list traffic according\n" " to the settings below?" msgstr "" #: Mailman/Gui/ContentFilter.py:79 msgid "" "Remove message attachments that have a matching content\n" " type." msgstr "" #: Mailman/Gui/ContentFilter.py:82 msgid "" "Use this option to remove each message attachment that\n" " matches one of these content types. Each line should contain a\n" " string naming a MIME type/subtype,\n" " e.g. image/gif. Leave off the subtype to remove all\n" " parts with a matching major content type, e.g. image.\n" "\n" "

    Blank lines are ignored.\n" "\n" "

    See also pass_mime_types for a content type whitelist." msgstr "" #: Mailman/Gui/ContentFilter.py:94 msgid "" "Remove message attachments that don't have a matching\n" " content type. Leave this field blank to skip this filter\n" " test." msgstr "" #: Mailman/Gui/ContentFilter.py:98 msgid "" "Use this option to remove each message attachment that does\n" " not have a matching content type. Requirements and formats are\n" " exactly like filter_mime_types.\n" "\n" "

    Note: if you add entries to this list but don't add\n" " multipart to this list, any messages with attachments\n" " will be rejected by the pass filter." msgstr "" #: Mailman/Gui/ContentFilter.py:108 msgid "" "Remove message attachments that have a matching filename\n" " extension." msgstr "" #: Mailman/Gui/ContentFilter.py:112 msgid "" "Remove message attachments that don't have a matching\n" " filename extension. Leave this field blank to skip this filter\n" " test." msgstr "" #: Mailman/Gui/ContentFilter.py:117 msgid "" "Should Mailman collapse multipart/alternative to its\n" " first part content?" msgstr "" #: Mailman/Gui/ContentFilter.py:121 msgid "" "Should Mailman convert text/html parts to plain\n" " text? This conversion happens after MIME attachments have been\n" " stripped." msgstr "" #: Mailman/Gui/ContentFilter.py:127 msgid "" "Action to take when a message matches the content filtering\n" " rules." msgstr "" #: Mailman/Gui/ContentFilter.py:130 msgid "" "One of these actions is taken when the message matches one of\n" " the content filtering rules, meaning, the top-level\n" " content type matches one of the filter_mime_types, or the top-level content type does\n" " not match one of the\n" " pass_mime_types, or if after filtering the subparts of the\n" " message, the message ends up empty.\n" "\n" "

    Note this action is not taken if after filtering the message\n" " still contains content. In that case the message is always\n" " forwarded on to the list membership.\n" "\n" "

    When messages are discarded, a log entry is written\n" " containing the Message-ID of the discarded message. When\n" " messages are rejected or forwarded to the list owner, a reason\n" " for the rejection is included in the bounce message to the\n" " original author. When messages are preserved, they are saved in\n" " a special queue directory on disk for the site administrator to\n" " view (and possibly rescue) but otherwise discarded. This last\n" " option is only available if enabled by the site\n" " administrator." msgstr "" #: Mailman/Gui/ContentFilter.py:171 msgid "Bad MIME type ignored: %(spectype)s" msgstr "" #: Mailman/Gui/Digest.py:36 msgid "Digest options" msgstr "" #: Mailman/Gui/Digest.py:44 msgid "Batched-delivery digest characteristics." msgstr "" #: Mailman/Gui/Digest.py:47 msgid "Can list members choose to receive list traffic bunched in digests?" msgstr "" #: Mailman/Gui/Digest.py:51 msgid "Digest" msgstr "" #: Mailman/Gui/Digest.py:51 msgid "Regular" msgstr "" #: Mailman/Gui/Digest.py:52 msgid "Which delivery mode is the default for new users?" msgstr "" #: Mailman/Gui/Digest.py:55 msgid "MIME" msgstr "" #: Mailman/Gui/Digest.py:55 msgid "Plain" msgstr "" #: Mailman/Gui/Digest.py:56 msgid "When receiving digests, which format is default?" msgstr "" #: Mailman/Gui/Digest.py:59 msgid "How big in Kb should a digest be before it gets sent out? 0 implies no maximum size." msgstr "" #: Mailman/Gui/Digest.py:63 msgid "Should a digest be dispatched daily when the size threshold isn't reached?" msgstr "" #: Mailman/Gui/Digest.py:67 msgid "Header added to every digest" msgstr "" #: Mailman/Gui/Digest.py:68 msgid "Text attached (as an initial message, before the table of contents) to the top of digests. " msgstr "" #: Mailman/Gui/Digest.py:73 msgid "Footer added to every digest" msgstr "" #: Mailman/Gui/Digest.py:74 msgid "Text attached (as a final message) to the bottom of digests. " msgstr "" #: Mailman/Gui/Digest.py:80 msgid "How often should a new digest volume be started?" msgstr "" #: Mailman/Gui/Digest.py:81 msgid "" "When a new digest volume is started, the volume number is\n" " incremented and the issue number is reset to 1." msgstr "" #: Mailman/Gui/Digest.py:85 msgid "Should Mailman start a new digest volume?" msgstr "" #: Mailman/Gui/Digest.py:86 msgid "" "Setting this option instructs Mailman to start a new volume\n" " with the next digest sent out." msgstr "" #: Mailman/Gui/Digest.py:90 msgid "" "Should Mailman send the next digest right now, if it is not\n" " empty?" msgstr "" #: Mailman/Gui/Digest.py:145 msgid "" "The next digest will be sent as volume\n" " %(volume)s, number %(number)s" msgstr "" #: Mailman/Gui/Digest.py:150 msgid "A digest has been sent." msgstr "" #: Mailman/Gui/Digest.py:152 msgid "There was no digest to send." msgstr "" #: Mailman/Gui/GUIBase.py:173 msgid "Invalid value for variable: %(property)s" msgstr "" #: Mailman/Gui/GUIBase.py:178 msgid "Bad email address for option %(property)s: %(error)s" msgstr "" #: Mailman/Gui/GUIBase.py:204 msgid "" "The following illegal substitution variables were\n" " found in the %(property)s string:\n" " %(bad)s\n" "

    Your list may not operate properly until you correct this\n" " problem." msgstr "" #: Mailman/Gui/GUIBase.py:218 msgid "" "Your %(property)s string appeared to\n" " have some correctable problems in its new value.\n" " The fixed value will be used instead. Please\n" " double check that this is what you intended.\n" " " msgstr "" #: Mailman/Gui/General.py:37 msgid "General Options" msgstr "" #: Mailman/Gui/General.py:51 msgid "Conceal the member's address" msgstr "" #: Mailman/Gui/General.py:52 msgid "Acknowledge the member's posting" msgstr "" #: Mailman/Gui/General.py:53 msgid "Do not send a copy of a member's own post" msgstr "" #: Mailman/Gui/General.py:55 msgid "Filter out duplicate messages to list members (if possible)" msgstr "" #: Mailman/Gui/General.py:62 msgid "" "Fundamental list characteristics, including descriptive\n" " info and basic behaviors." msgstr "" #: Mailman/Gui/General.py:65 msgid "General list personality" msgstr "" #: Mailman/Gui/General.py:68 msgid "The public name of this list (make case-changes only)." msgstr "" #: Mailman/Gui/General.py:69 msgid "" "The capitalization of this name can be changed to make it\n" " presentable in polite company as a proper noun, or to make an\n" " acronym part all upper case, etc. However, the name will be\n" " advertised as the email address (e.g., in subscribe confirmation\n" " notices), so it should not be otherwise altered. (Email\n" " addresses are not case sensitive, but they are sensitive to\n" " almost everything else :-)" msgstr "" #: Mailman/Gui/General.py:78 msgid "" "The list administrator email addresses. Multiple\n" " administrator addresses, each on separate line is okay." msgstr "" #: Mailman/Gui/General.py:81 msgid "" "There are two ownership roles associated with each mailing\n" " list. The list administrators are the people who have\n" " ultimate control over all parameters of this mailing list. They\n" " are able to change any list configuration variable available\n" " through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions;\n" " they are not able to change any list configuration variable, but\n" " they are allowed to tend to pending administration requests,\n" " including approving or rejecting held subscription requests, and\n" " disposing of held postings. Of course, the list\n" " administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into\n" " administrators and moderators, you must\n" " set a separate moderator password,\n" " and also provide the email\n" " addresses of the list moderators. Note that the field you\n" " are changing here specifies the list administrators." msgstr "" #: Mailman/Gui/General.py:102 msgid "" "The list moderator email addresses. Multiple\n" " moderator addresses, each on separate line is okay." msgstr "" #: Mailman/Gui/General.py:105 msgid "" "There are two ownership roles associated with each mailing\n" " list. The list administrators are the people who have\n" " ultimate control over all parameters of this mailing list. They\n" " are able to change any list configuration variable available\n" " through these administration web pages.\n" "\n" "

    The list moderators have more limited permissions;\n" " they are not able to change any list configuration variable, but\n" " they are allowed to tend to pending administration requests,\n" " including approving or rejecting held subscription requests, and\n" " disposing of held postings. Of course, the list\n" " administrators can also tend to pending requests.\n" "\n" "

    In order to split the list ownership duties into\n" " administrators and moderators, you must\n" " set a separate moderator password,\n" " and also provide the email addresses of the list moderators in\n" " this section. Note that the field you are changing here\n" " specifies the list moderators." msgstr "" #: Mailman/Gui/General.py:126 msgid "A terse phrase identifying this list." msgstr "" #: Mailman/Gui/General.py:128 msgid "" "This description is used when the mailing list is listed with\n" " other mailing lists, or in headers, and so forth. It should\n" " be as succinct as you can get it, while still identifying what\n" " the list is." msgstr "" #: Mailman/Gui/General.py:134 msgid "" "An introductory description - a few paragraphs - about the\n" " list. It will be included, as html, at the top of the listinfo\n" " page. Carriage returns will end a paragraph - see the details\n" " for more info." msgstr "" #: Mailman/Gui/General.py:138 msgid "" "The text will be treated as html except that\n" " newlines will be translated to <br> - so you can use links,\n" " preformatted text, etc, but don't put in carriage returns except\n" " where you mean to separate paragraphs. And review your changes -\n" " bad html (like some unterminated HTML constructs) can prevent\n" " display of the entire listinfo page." msgstr "" #: Mailman/Gui/General.py:146 msgid "Prefix for subject line of list postings." msgstr "" #: Mailman/Gui/General.py:147 msgid "" "This text will be prepended to subject lines of messages\n" " posted to the list, to distinguish mailing list messages in\n" " mailbox summaries. Brevity is premium here, it's ok to shorten\n" " long mailing list names to something more concise, as long as it\n" " still identifies the mailing list.\n" " You can also add a sequential number by %%d substitution\n" " directive. eg.; [listname %%d] -> [listname 123]\n" " (listname %%05d) -> (listname 00123)\n" " " msgstr "" #: Mailman/Gui/General.py:158 Mailman/Gui/Privacy.py:288 msgid "Munge From" msgstr "" #: Mailman/Gui/General.py:158 Mailman/Gui/Privacy.py:288 msgid "Wrap Message" msgstr "" #: Mailman/Gui/General.py:159 msgid "" "Replace the From: header address with the list's posting\n" " address to mitigate issues stemming from the original From:\n" " domain's DMARC or similar policies." msgstr "" #: Mailman/Gui/General.py:162 msgid "" "Several protocols now in wide use attempt to ensure that use\n" " of the domain in the author's address (ie, in the From: header\n" " field) is authorized by that domain. These protocols may be\n" " incompatible with common list features such as footers, causing\n" " participating email services to bounce list traffic merely\n" " because of the address in the From: field. This has resulted\n" " in members being unsubscribed despite being perfectly able to\n" " receive mail.\n" "

    \n" " The following actions are applied to all list messages when\n" " selected here. To apply these actions only to messages where the\n" " domain in the From: header is determined to use such a protocol,\n" " see the \n" " dmarc_moderation_action settings under Privacy options...\n" " -> Sender filters.\n" "

    Settings:

    \n" "

    \n" "
    No
    \n" "
    Do nothing special. This is appropriate for anonymous lists.\n" " It is appropriate for dedicated announcement lists, unless the\n" " From: address of authorized posters might be in a domain with a\n" " DMARC or similar policy. It is also appropriate if you choose to\n" " use dmarc_moderation_action other than Accept for this list.
    \n" "
    Munge From
    \n" "
    This action replaces the poster's address in the From: header\n" " with the list's posting address and adds the poster's address to\n" " the addresses in the original Reply-To: header.
    \n" "
    Wrap Message
    \n" "
    Just wrap the message in an outer message with the From:\n" " header containing the list's posting address and with the original\n" " From: address added to the addresses in the original Reply-To:\n" " header and with Content-Type: message/rfc822. This is effectively\n" " a one message MIME format digest.
    \n" "
    \n" "

    The transformations for anonymous_list are applied before\n" " any of these actions. It is not useful to apply actions other\n" " than No to an anonymous list, and if you do so, the result may\n" " be surprising.\n" "

    The Reply-To: header munging actions below interact with these\n" " actions as follows:\n" "

    first_strip_reply_to = Yes will remove all the incoming\n" " Reply-To: addresses but will still add the poster's address to\n" " Reply-To: for all three settings of reply_goes_to_list which\n" " respectively will result in just the poster's address, the\n" " poster's address and the list posting address or the poster's\n" " address and the explicit reply_to_address in the outgoing\n" " Reply-To: header. If first_strip_reply_to = No the poster's\n" " address in the original From: header, if not already included in\n" " the Reply-To:, will be added to any existing Reply-To:\n" " address(es).\n" "

    These actions, whether selected here or via \n" " dmarc_moderation_action, do not apply to messages in digests\n" " or archives or sent to usenet via the Mail<->News gateways.\n" "

    If \n" " dmarc_moderation_action applies to this message with an\n" " action other than Accept, that action rather than this is\n" " applied" msgstr "" #: Mailman/Gui/General.py:224 msgid "" "Hide the sender of a message, replacing it with the list\n" " address (Removes From, Sender and Reply-To fields)" msgstr "" #: Mailman/Gui/General.py:227 msgid "Reply-To: header munging" msgstr "" #: Mailman/Gui/General.py:230 msgid "" "Should any existing Reply-To: header found in the\n" " original message be stripped? If so, this will be done\n" " regardless of whether an explict Reply-To: header is\n" " added by Mailman or not." msgstr "" #: Mailman/Gui/General.py:236 msgid "Explicit address" msgstr "" #: Mailman/Gui/General.py:236 msgid "Poster" msgstr "" #: Mailman/Gui/General.py:236 msgid "This list" msgstr "" #: Mailman/Gui/General.py:237 msgid "" "Where are replies to list messages directed?\n" " Poster is strongly recommended for most mailing\n" " lists." msgstr "" #: Mailman/Gui/General.py:242 msgid "" "This option controls what Mailman does to the\n" " Reply-To: header in messages flowing through this\n" " mailing list. When set to Poster, no Reply-To:\n" " header is added by Mailman, although if one is present in the\n" " original message, it is not stripped. Setting this value to\n" " either This list or Explicit address causes\n" " Mailman to insert a specific Reply-To: header in all\n" " messages, overriding the header in the original message if\n" " necessary (Explicit address inserts the value of reply_to_address).\n" "\n" "

    There are many reasons not to introduce or override the\n" " Reply-To: header. One is that some posters depend on\n" " their own Reply-To: settings to convey their valid\n" " return address. Another is that modifying Reply-To:\n" " makes it much more difficult to send private replies. See `Reply-To'\n" " Munging Considered Harmful for a general discussion of this\n" " issue. See \n" " Reply-To Munging Considered Useful for a dissenting opinion.\n" "\n" "

    Some mailing lists have restricted posting privileges, with a\n" " parallel list devoted to discussions. Examples are `patches' or\n" " `checkin' lists, where software changes are posted by a revision\n" " control system, but discussion about the changes occurs on a\n" " developers mailing list. To support these types of mailing\n" " lists, select Explicit address and set the\n" " Reply-To: address below to point to the parallel\n" " list." msgstr "" #: Mailman/Gui/General.py:274 msgid "Explicit Reply-To: header." msgstr "" #: Mailman/Gui/General.py:276 msgid "" "This is the address set in the Reply-To: header\n" " when the reply_goes_to_list\n" " option is set to Explicit address.\n" "\n" "

    There are many reasons not to introduce or override the\n" " Reply-To: header. One is that some posters depend on\n" " their own Reply-To: settings to convey their valid\n" " return address. Another is that modifying Reply-To:\n" " makes it much more difficult to send private replies. See `Reply-To'\n" " Munging Considered Harmful for a general discussion of this\n" " issue. See \n" " Reply-To Munging Considered Useful for a dissenting opinion.\n" "\n" "

    Some mailing lists have restricted posting privileges, with a\n" " parallel list devoted to discussions. Examples are `patches' or\n" " `checkin' lists, where software changes are posted by a revision\n" " control system, but discussion about the changes occurs on a\n" " developers mailing list. To support these types of mailing\n" " lists, specify the explicit Reply-To: address here. You\n" " must also specify Explicit address in the\n" " reply_goes_to_list\n" " variable.\n" "\n" "

    Note that if the original message contains a\n" " Reply-To: header, it will not be changed." msgstr "" #: Mailman/Gui/General.py:305 msgid "Umbrella list settings" msgstr "" #: Mailman/Gui/General.py:308 msgid "" "Send password reminders to, eg, \"-owner\" address instead of\n" " directly to user." msgstr "" #: Mailman/Gui/General.py:311 msgid "" "Set this to yes when this list is intended to cascade only\n" " to other mailing lists. When set, meta notices like\n" " confirmations and password reminders will be directed to an\n" " address derived from the member's address - it will have the\n" " value of \"umbrella_member_suffix\" appended to the member's\n" " account name." msgstr "" #: Mailman/Gui/General.py:319 msgid "" "Suffix for use when this list is an umbrella for other\n" " lists, according to setting of previous \"umbrella_list\"\n" " setting." msgstr "" #: Mailman/Gui/General.py:323 msgid "" "When \"umbrella_list\" is set to indicate that this list has\n" " other mailing lists as members, then administrative notices like\n" " confirmations and password reminders need to not be sent to the\n" " member list addresses, but rather to the owner of those member\n" " lists. In that case, the value of this setting is appended to\n" " the member's account name for such notices. `-owner' is the\n" " typical choice. This setting has no effect when \"umbrella_list\"\n" " is \"No\"." msgstr "" #: Mailman/Gui/General.py:335 msgid "Send monthly password reminders?" msgstr "" #: Mailman/Gui/General.py:337 msgid "" "Turn this on if you want password reminders to be sent once\n" " per month to your members. Note that members may disable their\n" " own individual password reminders." msgstr "" #: Mailman/Gui/General.py:342 msgid "" "List-specific text prepended to new-subscriber welcome\n" " message" msgstr "" #: Mailman/Gui/General.py:345 msgid "" "This value, if any, will be added to the front of the\n" " new-subscriber welcome message. The rest of the welcome message\n" " already describes the important addresses and URLs for the\n" " mailing list, so you don't need to include any of that kind of\n" " stuff here. This should just contain mission-specific kinds of\n" " things, like etiquette policies or team orientation, or that kind\n" " of thing.\n" "\n" "

    Note that this text will be wrapped, according to the\n" " following rules:\n" "

    • Each paragraph is filled so that no line is longer than\n" " 70 characters.\n" "
    • Any line that begins with whitespace is not filled.\n" "
    • A blank line separates paragraphs.\n" "
    " msgstr "" #: Mailman/Gui/General.py:362 msgid "Send welcome message to newly subscribed members?" msgstr "" #: Mailman/Gui/General.py:363 msgid "" "Turn this off only if you plan on subscribing people manually\n" " and don't want them to know that you did so. This option is most\n" " useful for transparently migrating lists from some other mailing\n" " list manager to Mailman." msgstr "" #: Mailman/Gui/General.py:369 msgid "" "Text sent to people leaving the list. If empty, no special\n" " text will be added to the unsubscribe message." msgstr "" #: Mailman/Gui/General.py:373 msgid "Send goodbye message to members when they are unsubscribed?" msgstr "" #: Mailman/Gui/General.py:376 msgid "" "Should the list moderators get immediate notice of new\n" " requests, as well as daily notices about collected ones?" msgstr "" #: Mailman/Gui/General.py:379 msgid "" "List moderators (and list administrators) are sent daily\n" " reminders of requests pending approval, like subscriptions to a\n" " moderated list, or postings that are being held for one reason or\n" " another. Setting this option causes notices to be sent\n" " immediately on the arrival of new requests as well." msgstr "" #: Mailman/Gui/General.py:386 msgid "" "Should administrator get notices of subscribes and\n" " unsubscribes?" msgstr "" #: Mailman/Gui/General.py:391 msgid "Send mail to poster when their posting is held for approval?" msgstr "" #: Mailman/Gui/General.py:394 msgid "Additional settings" msgstr "" #: Mailman/Gui/General.py:397 msgid "Emergency moderation of all list traffic." msgstr "" #: Mailman/Gui/General.py:398 msgid "" "When this option is enabled, all list traffic is emergency\n" " moderated, i.e. held for moderation. Turn this option on when\n" " your list is experiencing a flamewar and you want a cooling off\n" " period." msgstr "" #: Mailman/Gui/General.py:410 msgid "" "Default options for new members joining this list." msgstr "" #: Mailman/Gui/General.py:413 msgid "" "When a new member is subscribed to this list, their initial\n" " set of options is taken from this variable's setting." msgstr "" #: Mailman/Gui/General.py:417 msgid "" "(Administrivia filter) Check postings and intercept ones\n" " that seem to be administrative requests?" msgstr "" #: Mailman/Gui/General.py:420 msgid "" "Administrivia tests will check postings to see whether it's\n" " really meant as an administrative request (like subscribe,\n" " unsubscribe, etc), and will add it to the the administrative\n" " requests queue, notifying the administrator of the new request,\n" " in the process." msgstr "" #: Mailman/Gui/General.py:427 msgid "" "Maximum length in kilobytes (KB) of a message body. Use 0\n" " for no limit." msgstr "" #: Mailman/Gui/General.py:431 msgid "" "Maximum number of members to show on one page of the\n" " Membership List." msgstr "" #: Mailman/Gui/General.py:435 msgid "Host name this list prefers for email." msgstr "" #: Mailman/Gui/General.py:437 msgid "" "The \"host_name\" is the preferred name for email to\n" " mailman-related addresses on this host, and generally should be\n" " the mail host's exchanger address, if any. This setting can be\n" " useful for selecting among alternative names of a host that has\n" " multiple addresses." msgstr "" #: Mailman/Gui/General.py:449 msgid "" "Should messages from this mailing list include the\n" " RFC 2369\n" " (i.e. List-*) headers? Yes is highly\n" " recommended." msgstr "" #: Mailman/Gui/General.py:454 msgid "" "RFC 2369 defines a set of List-* headers that are\n" " normally added to every message sent to the list membership.\n" " These greatly aid end-users who are using standards compliant\n" " mail readers. They should normally always be enabled.\n" "\n" "

    However, not all mail readers are standards compliant yet,\n" " and if you have a large number of members who are using\n" " non-compliant mail readers, they may be annoyed at these\n" " headers. You should first try to educate your members as to\n" " why these headers exist, and how to hide them in their mail\n" " clients. As a last resort you can disable these headers, but\n" " this is not recommended (and in fact, your ability to disable\n" " these headers may eventually go away)." msgstr "" #: Mailman/Gui/General.py:472 msgid "Should postings include the List-Post: header?" msgstr "" #: Mailman/Gui/General.py:473 msgid "" "The List-Post: header is one of the headers\n" " recommended by\n" " RFC 2369.\n" " However for some announce-only mailing lists, only a\n" " very select group of people are allowed to post to the list; the\n" " general membership is usually not allowed to post. For lists of\n" " this nature, the List-Post: header is misleading.\n" " Select No to disable the inclusion of this header. (This\n" " does not affect the inclusion of the other List-*:\n" " headers.)" msgstr "" #: Mailman/Gui/General.py:489 msgid "" "Should the Sender header be rewritten for this\n" " mailing list to avoid stray bounces? Yes is\n" " recommended." msgstr "" #: Mailman/Gui/General.py:493 msgid "" "RFC\n" " 2822 defines the Sender header and defines it\n" " as \"the mailbox of the agent responsible for the actual\n" " transmission of the message.\" Mailman replaces this header\n" " by default with the list's bounce address.\n" " \n" "

    While it is debatable if Mailman is such an agent, setting\n" " this header helps directing bounces from some broken MTAs to\n" " the right destination. On the other hand, some mail\n" " readers show unexpected behaviour if this header is set (like\n" " missing addresses in forwarded mails and copies sent to the\n" " bounce address on reply-to-all), so it can be disabled \n" " here." msgstr "" #: Mailman/Gui/General.py:512 msgid "Should duplicate avoidance drop addresses from Cc: headers" msgstr "" #: Mailman/Gui/General.py:513 msgid "" "The process which avoids sending a list copy of a message to\n" " a member who is also directly addressed in To: or Cc: can drop\n" " the address from Cc: to avoid growing a long Cc: list in long\n" " threads. This can be undesirable as it can break DKIM\n" " signatures and possibly cause confusion. To avoid changes to\n" " Cc: headers, set this to No." msgstr "" #: Mailman/Gui/General.py:524 msgid "" "Discard held messages older than this number of days.\n" " Use 0 for no automatic discarding." msgstr "" #: Mailman/Gui/General.py:534 msgid "" "real_name attribute not\n" " changed! It must differ from the list's name by case\n" " only." msgstr "" #: Mailman/Gui/General.py:562 msgid "" "The info attribute you saved\n" "contains suspicious HTML that could potentially expose your users to cross-site\n" "scripting attacks. This change has therefore been rejected. If you still want\n" "to make these changes, you must have shell access to your Mailman server.\n" "This change can be made with bin/withlist or with bin/config_list by setting\n" "mlist.info.\n" " " msgstr "" #: Mailman/Gui/General.py:573 msgid "" "admin_member_chunksize attribute not\n" " changed! It must be an integer > 0." msgstr "" #: Mailman/Gui/General.py:579 msgid "" "host_name attribute not changed!\n" " It must be a valid domain name." msgstr "" #: Mailman/Gui/General.py:591 msgid "" "You cannot add a Reply-To: to an explicit\n" " address if that address is blank. Resetting these values." msgstr "" #: Mailman/Gui/Language.py:34 msgid "Language options" msgstr "" #: Mailman/Gui/Language.py:66 msgid "Natural language (internationalization) options." msgstr "" #: Mailman/Gui/Language.py:71 msgid "Default language for this list." msgstr "" #: Mailman/Gui/Language.py:72 msgid "" "This is the default natural language for this mailing list.\n" " If more than one\n" " language is supported then users will be able to select their\n" " own preferences for when they interact with the list. All other\n" " interactions will be conducted in the default language. This\n" " applies to both web-based and email-based messages, but not to\n" " email posted by list members." msgstr "" #: Mailman/Gui/Language.py:82 msgid "Languages supported by this list." msgstr "" #: Mailman/Gui/Language.py:84 msgid "" "These are all the natural languages supported by this list.\n" " Note that the\n" " default\n" " language must be included." msgstr "" #: Mailman/Gui/Language.py:90 msgid "Always" msgstr "" #: Mailman/Gui/Language.py:90 msgid "As needed" msgstr "" #: Mailman/Gui/Language.py:90 msgid "Never" msgstr "" #: Mailman/Gui/Language.py:91 msgid "" "Encode the\n" " subject\n" " prefix even when it consists of only ASCII characters?" msgstr "" #: Mailman/Gui/Language.py:95 msgid "" "If your mailing list's default language uses a non-ASCII\n" " character set and the prefix contains non-ASCII characters, the\n" " prefix will always be encoded according to the relevant\n" " standards. However, if your prefix contains only ASCII\n" " characters, you may want to set this option to Never to\n" " disable prefix encoding. This can make the subject headers\n" " slightly more readable for users with mail readers that don't\n" " properly handle non-ASCII encodings.\n" "\n" "

    Note however, that if your mailing list receives both encoded\n" " and unencoded subject headers, you might want to choose As\n" " needed. Using this setting, Mailman will not encode ASCII\n" " prefixes when the rest of the header contains only ASCII\n" " characters, but if the original header contains non-ASCII\n" " characters, it will encode the prefix. This avoids an ambiguity\n" " in the standards which could cause some mail readers to display\n" " extra, or missing spaces between the prefix and the original\n" " header." msgstr "" #: Mailman/Gui/Membership.py:26 msgid "Membership Management..." msgstr "" #: Mailman/Gui/Membership.py:30 msgid "Membership List" msgstr "" #: Mailman/Gui/Membership.py:31 msgid "Mass Subscription" msgstr "" #: Mailman/Gui/Membership.py:32 msgid "Mass Removal" msgstr "" #: Mailman/Gui/Membership.py:33 msgid "Address Change" msgstr "" #: Mailman/Gui/Membership.py:34 msgid "Sync Membership List" msgstr "" #: Mailman/Gui/NonDigest.py:35 msgid "Non-digest options" msgstr "" #: Mailman/Gui/NonDigest.py:43 msgid "Policies concerning immediately delivered list traffic." msgstr "" #: Mailman/Gui/NonDigest.py:46 msgid "" "Can subscribers choose to receive mail immediately, rather\n" " than in batched digests?" msgstr "" #: Mailman/Gui/NonDigest.py:53 msgid "Full Personalization" msgstr "" #: Mailman/Gui/NonDigest.py:55 msgid "" "Should Mailman personalize each non-digest delivery?\n" " This is often useful for announce-only lists, but read the details\n" " section for a discussion of important performance\n" " issues." msgstr "" #: Mailman/Gui/NonDigest.py:61 msgid "" "Normally, Mailman sends the regular delivery messages to\n" " the mail server in batches. This is much more efficent\n" " because it reduces the amount of traffic between Mailman and\n" " the mail server.\n" "\n" "

    However, some lists can benefit from a more personalized\n" " approach. In this case, Mailman crafts a new message for\n" " each member on the regular delivery list. Turning this\n" " feature on may degrade the performance of your site, so you\n" " need to carefully consider whether the trade-off is worth it,\n" " or whether there are other ways to accomplish what you want.\n" " You should also carefully monitor your system load to make\n" " sure it is acceptable.\n" "\n" "

    Select No to disable personalization and send\n" " messages to the members in batches. Select Yes to\n" " personalize deliveries and allow additional substitution\n" " variables in message headers and footers (see below). In\n" " addition, by selecting Full Personalization, the\n" " To header of posted messages will be modified to\n" " include the member's address instead of the list's posting\n" " address.\n" "\n" "

    When personalization is enabled, a few more expansion\n" " variables can be included in the message header and\n" " message footer.\n" "\n" "

    These additional substitution variables will be available\n" " for your headers and footers, when this feature is enabled:\n" "\n" "

    • user_address - The address of the user,\n" " coerced to lower case.\n" "
    • user_delivered_to - The case-preserved address\n" " that the user is subscribed with.\n" "
    • user_password - The user's password.\n" "
    • user_name - The user's full name.\n" "
    • user_optionsurl - The url to the user's option\n" " page.\n" "
    \n" " " msgstr "" #: Mailman/Gui/NonDigest.py:110 msgid "" "When personalization is enabled\n" "for this list, additional substitution variables are allowed in your headers\n" "and footers:\n" "\n" "
    • user_address - The address of the user,\n" " coerced to lower case.\n" "
    • user_delivered_to - The case-preserved address\n" " that the user is subscribed with.\n" "
    • user_password - The user's password.\n" "
    • user_name - The user's full name.\n" "
    • user_optionsurl - The url to the user's option\n" " page.\n" "
    \n" msgstr "" #: Mailman/Gui/NonDigest.py:129 msgid "Header added to mail sent to regular list members" msgstr "" #: Mailman/Gui/NonDigest.py:130 msgid "" "Text prepended to the top of every immediately-delivery\n" " message. " msgstr "" #: Mailman/Gui/NonDigest.py:134 msgid "Footer added to mail sent to regular list members" msgstr "" #: Mailman/Gui/NonDigest.py:135 msgid "" "Text appended to the bottom of every immediately-delivery\n" " message. " msgstr "" #: Mailman/Gui/NonDigest.py:141 msgid "Scrub attachments of regular delivery message?" msgstr "" #: Mailman/Gui/NonDigest.py:142 msgid "" "When you scrub attachments, they are stored in the archive\n" " area and links are made in the message so that the member can\n" " access them via a web browser. If you want the attachments to\n" " totally disappear, you can use content filtering options." msgstr "" #: Mailman/Gui/NonDigest.py:149 msgid "Sibling lists" msgstr "" #: Mailman/Gui/NonDigest.py:152 msgid "" "Other mailing lists on this site whose members are\n" " excluded from the regular (non-digest) delivery if those\n" " list addresses appear in a To: or Cc: header." msgstr "" #: Mailman/Gui/NonDigest.py:155 msgid "" "The list addresses should be written in full mail address\n" " format (e.g. mailman@example.com). Do not specify this list\n" " address mutually in the exclude list configuration page of the\n" " other list, or members of both lists won't get any message.\n" " Note also that the site administrator may prohibit cross domain\n" " siblings." msgstr "" #: Mailman/Gui/NonDigest.py:163 msgid "" "Ignore regular_exclude_lists of which the poster is not a\n" " member." msgstr "" #: Mailman/Gui/NonDigest.py:165 msgid "" "If a post is addressed to this list and to one or more of\n" " the exclude lists, regular members of those lists will not be\n" " sent the post from this list, but if the poster is not a member\n" " of an excluded list, the post may not be accepted by that list\n" " which leaves the members of that list with no copy of the post.\n" " Setting this to Yes ignores any of the exclude lists of which the\n" " poster is not a member." msgstr "" #: Mailman/Gui/NonDigest.py:174 msgid "" "Other mailing lists on this site whose members are\n" " included in the regular (non-digest) delivery if those\n" " list addresses don't appear in a To: or Cc: header." msgstr "" #: Mailman/Gui/NonDigest.py:177 msgid "" "The list addresses should be written in full mail address\n" " format (e.g. mailman@example.com). Note also that the site\n" " administrator may prohibit cross domain siblings." msgstr "" #: Mailman/Gui/Passwords.py:27 msgid "Passwords" msgstr "" #: Mailman/Gui/Privacy.py:38 msgid "Privacy options..." msgstr "" #: Mailman/Gui/Privacy.py:42 msgid "Subscription rules" msgstr "" #: Mailman/Gui/Privacy.py:43 msgid "Sender filters" msgstr "" #: Mailman/Gui/Privacy.py:44 msgid "Recipient filters" msgstr "" #: Mailman/Gui/Privacy.py:45 msgid "Spam filters" msgstr "" #: Mailman/Gui/Privacy.py:59 Mailman/Gui/Usenet.py:63 msgid "None" msgstr "" #: Mailman/Gui/Privacy.py:60 Mailman/Gui/Privacy.py:83 msgid "Confirm" msgstr "" #: Mailman/Gui/Privacy.py:61 Mailman/Gui/Privacy.py:84 msgid "Require approval" msgstr "" #: Mailman/Gui/Privacy.py:62 Mailman/Gui/Privacy.py:85 msgid "Confirm and approve" msgstr "" #: Mailman/Gui/Privacy.py:64 Mailman/Gui/Privacy.py:87 msgid "What steps are required for subscription?
    " msgstr "" #: Mailman/Gui/Privacy.py:65 msgid "" "None - no verification steps (Not\n" " Recommended )
    \n" " Confirm (*) - email confirmation step required
    \n" " Require approval - require list administrator\n" " Approval for subscriptions
    \n" " Confirm and approve - both confirm and approve\n" " \n" "

    (*) when someone requests a subscription,\n" " Mailman sends them a notice with a unique\n" " subscription request number that they must reply to\n" " in order to subscribe.
    \n" "\n" " This prevents mischievous (or malicious) people\n" " from creating subscriptions for others without\n" " their consent." msgstr "" #: Mailman/Gui/Privacy.py:88 msgid "" "Confirm (*) - email confirmation required
    \n" " Require approval - require list administrator\n" " approval for subscriptions
    \n" " Confirm and approve - both confirm and approve\n" " \n" "

    (*) when someone requests a subscription,\n" " Mailman sends them a notice with a unique\n" " subscription request number that they must reply to\n" " in order to subscribe.
    This prevents\n" " mischievous (or malicious) people from creating\n" " subscriptions for others without their consent." msgstr "" #: Mailman/Gui/Privacy.py:104 msgid "" "This section allows you to configure subscription and\n" " membership exposure policy. You can also control whether this\n" " list is public or not. See also the\n" " Archival Options section for\n" " separate archive-related privacy settings." msgstr "" #: Mailman/Gui/Privacy.py:110 msgid "Subscribing" msgstr "" #: Mailman/Gui/Privacy.py:112 msgid "" "Advertise this list when people ask what lists are on this\n" " machine?" msgstr "" #: Mailman/Gui/Privacy.py:118 msgid "" "List of addresses (or regexps) whose subscriptions do not\n" " require approval." msgstr "" #: Mailman/Gui/Privacy.py:121 msgid "" "When subscription requires approval, addresses in this list\n" " are allowed to subscribe without administrator approval. Add\n" " addresses one per line. You may begin a line with a ^ character\n" " to designate a (case insensitive) regular expression match." msgstr "" #: Mailman/Gui/Privacy.py:126 msgid "" "You may also use the @listname notation to designate the\n" " members of another list in this installation." msgstr "" #: Mailman/Gui/Privacy.py:130 msgid "" "Is the list moderator's approval required for unsubscription\n" " requests? (No is recommended)" msgstr "" #: Mailman/Gui/Privacy.py:133 msgid "" "When members want to leave a list, they will make an\n" " unsubscription request, either via the web or via email.\n" " Normally it is best for you to allow open unsubscriptions so that\n" " users can easily remove themselves from mailing lists (they get\n" " really upset if they can't get off lists!).\n" "\n" "

    For some lists though, you may want to impose moderator\n" " approval before an unsubscription request is processed. Examples\n" " of such lists include a corporate mailing list that all employees\n" " are required to be members of." msgstr "" #: Mailman/Gui/Privacy.py:144 msgid "Ban list" msgstr "" #: Mailman/Gui/Privacy.py:146 msgid "" "List of addresses which are banned from membership in this\n" " mailing list." msgstr "" #: Mailman/Gui/Privacy.py:149 msgid "" "Addresses in this list are banned outright from subscribing\n" " to this mailing list, with no further moderation required. Add\n" " addresses one per line; start the line with a ^ character to\n" " designate a regular expression match." msgstr "" #: Mailman/Gui/Privacy.py:154 msgid "Membership exposure" msgstr "" #: Mailman/Gui/Privacy.py:156 msgid "Anyone" msgstr "" #: Mailman/Gui/Privacy.py:156 msgid "List admin only" msgstr "" #: Mailman/Gui/Privacy.py:156 msgid "List members" msgstr "" #: Mailman/Gui/Privacy.py:157 msgid "Who can view subscription list?" msgstr "" #: Mailman/Gui/Privacy.py:159 msgid "" "When set, the list of subscribers is protected by member or\n" " admin password authentication." msgstr "" #: Mailman/Gui/Privacy.py:163 msgid "" "Show member addresses so they're not directly recognizable\n" " as email addresses?" msgstr "" #: Mailman/Gui/Privacy.py:165 msgid "" "Setting this option causes member email addresses to be\n" " transformed when they are presented on list web pages (both in\n" " text and as links), so they're not trivially recognizable as\n" " email addresses. The intention is to prevent the addresses\n" " from being snarfed up by automated web scanners for use by\n" " spammers." msgstr "" #: Mailman/Gui/Privacy.py:176 msgid "/Quarantine" msgstr "" #: Mailman/Gui/Privacy.py:180 msgid "" "When a message is posted to the list, a series of\n" " moderation steps are taken to decide whether a moderator must\n" " first approve the message or not. This section contains the\n" " controls for moderation of both member and non-member postings.\n" "\n" "

    Member postings are held for moderation if their\n" " moderation flag is turned on. You can control whether\n" " member postings are moderated by default or not.\n" "\n" "

    Non-member postings can be automatically\n" " accepted,\n" " held for\n" " moderation,\n" " rejected (bounced), or\n" " discarded,\n" " either individually or as a group. Any\n" " posting from a non-member who is not explicitly accepted,\n" " rejected, or discarded, will have their posting filtered by the\n" " general\n" " non-member rules.\n" "\n" "

    In the text boxes below, add one address per line; start the\n" " line with a ^ character to designate a Python regular expression. When entering backslashes, do so\n" " as if you were using Python raw strings (i.e. you generally just\n" " use a single backslash).\n" "\n" "

    Note that non-regexp matches are always done first." msgstr "" #: Mailman/Gui/Privacy.py:213 msgid "Member filters" msgstr "" #: Mailman/Gui/Privacy.py:216 msgid "By default, should new list member postings be moderated?" msgstr "" #: Mailman/Gui/Privacy.py:218 msgid "" "Each list member has a moderation flag which says\n" " whether messages from the list member can be posted directly to\n" " the list, or must first be approved by the list moderator. When\n" " the moderation flag is turned on, list member postings must be\n" " approved first. You, the list administrator can decide whether a\n" " specific individual's postings will be moderated or not.\n" "\n" "

    When a new member is subscribed, their initial moderation flag\n" " takes its value from this option. Turn this option off to accept\n" " member postings by default. Turn this option on to, by default,\n" " moderate member postings first. You can always manually set an\n" " individual member's moderation bit by using the\n" " membership management\n" " screens." msgstr "" #: Mailman/Gui/Privacy.py:234 msgid "" "Ceiling on acceptable number of member posts, per interval,\n" " before automatic moderation." msgstr "" #: Mailman/Gui/Privacy.py:237 msgid "" "If a member posts this many times, within a period of time\n" " the member is automatically moderated. Use 0 to disable. See\n" " member_verbosity_interval for details on the time period.\n" "\n" "

    This is intended to stop people who join a list or lists and\n" " then use a bot to send many spam messages in a short interval.\n" "\n" "

    Be careful when using this setting. If it is set too low,\n" " this can be triggered by a single post cross-posted to\n" " multiple lists or by a single post to an umbrella list." msgstr "" #: Mailman/Gui/Privacy.py:250 msgid "" "Number of seconds to remember posts to this list to determine\n" " member_verbosity_threshold for automatic moderation of a\n" " member." msgstr "" #: Mailman/Gui/Privacy.py:254 msgid "" "If a member's total posts to all lists in this installation\n" " with member_verbosity_threshold enabled reaches this list's\n" " member_verbosity_threshold, the member is automatically\n" " moderated on this list.\n" "\n" "

    Posts which are counted towards this list's\n" " member_verbosity_threshold are all posts to any list with\n" " member_verbosity_threshold enabled that arrived within that\n" " list's member_verbosity_interval." msgstr "" #: Mailman/Gui/Privacy.py:266 msgid "" "Action to take when a moderated member posts to the\n" " list." msgstr "" #: Mailman/Gui/Privacy.py:268 msgid "" "

    • Hold -- this holds the message for approval\n" " by the list moderators.\n" "\n" "

    • Reject -- this automatically rejects the message by\n" " sending a bounce notice to the post's author. The text of the\n" " bounce notice can be configured by you.\n" "\n" "

    • Discard -- this simply discards the message, with\n" " no notice sent to the post's author.\n" "
    " msgstr "" #: Mailman/Gui/Privacy.py:282 msgid "" "Text to include in any\n" " rejection notice to\n" " be sent to moderated members who post to this list." msgstr "" #: Mailman/Gui/Privacy.py:290 msgid "" "Action to take when anyone posts to the\n" " list from a domain with a DMARC Reject%(quarantine)s Policy." msgstr "" #: Mailman/Gui/Privacy.py:293 msgid "" "
    • Munge From -- applies the from_is_list Munge From\n" " transformation to these messages.\n" "\n" "

    • Wrap Message -- applies the from_is_list Wrap\n" " Message transformation to these messages.\n" "\n" "

    • Reject -- this automatically rejects the message by\n" " sending a bounce notice to the post's author. The text of the\n" " bounce notice can be configured by you.\n" "\n" "

    • Discard -- this simply discards the message, with\n" " no notice sent to the post's author.\n" "
    \n" "\n" "

    This setting takes precedence over the from_is_list setting\n" " if the message is From: an affected domain and the setting is\n" " other than Accept." msgstr "" #: Mailman/Gui/Privacy.py:318 msgid "" "Shall the above dmarc_moderation_action apply to messages\n" " From: domains with DMARC p=quarantine as well as p=reject" msgstr "" #: Mailman/Gui/Privacy.py:321 msgid "" "

    • No -- this applies dmarc_moderation_action to\n" " only those posts From: a domain with DMARC p=reject. This is\n" " appropriate if you are concerned about bounced messages, but\n" " want to apply dmarc_moderation_action to as few messages as\n" " possible.\n" "

    • Yes -- this applies dmarc_moderation_action to\n" " posts From: a domain with DMARC p=reject or p=quarantine.\n" "

    If a message is From: a domain with DMARC p=quarantine\n" " and dmarc_moderation_action is not applied (this set to No)\n" " the message will likely not bounce, but will be delivered to\n" " recipients' spam folders or other hard to find places." msgstr "" #: Mailman/Gui/Privacy.py:335 msgid "" "Shall the above dmarc_moderation_action apply to messages\n" " From: domains with DMARC p=none as well as p=quarantine and\n" " p=reject" msgstr "" #: Mailman/Gui/Privacy.py:339 msgid "" "

    • No -- this applies dmarc_moderation_action to\n" " only those posts From: a domain with DMARC p=reject and\n" " possibly p=quarantine depending on the setting of\n" " dmarc_quarantine_moderation_action.\n" "

    • Yes -- this applies dmarc_moderation_action to\n" " posts From: a domain with DMARC p=none if\n" " dmarc_moderation_action is Munge From or Wrap Message and\n" " dmarc_quarantine_moderation_action is Yes.\n" "

      The intent of this setting is to eliminate failure reports\n" " to the owner of a domain that publishes DMARC p=none by applying\n" " the message transformations that would be applied if the\n" " domain's DMARC policy were stronger." msgstr "" #: Mailman/Gui/Privacy.py:353 msgid "" "Text to include in any\n" " rejection notice to\n" " be sent to anyone who posts to this list from a domain\n" " with a DMARC Reject%(quarantine)s Policy." msgstr "" #: Mailman/Gui/Privacy.py:360 msgid "" "List of addresses (or regexps) whose posts should always apply\n" " dmarc_moderation_action \n" " regardless of any domain specific DMARC Policy." msgstr "" #: Mailman/Gui/Privacy.py:365 msgid "" "Postings from any of these addresses will automatically\n" " apply any DMARC action mitigation. This can be utilized to\n" " automatically wrap or munge postings from known addresses or\n" " domains that might have policies rejecting external mail From:\n" " themselves.\n" "\n" "

      Add member addresses one per line; start the line with a ^\n" " character to designate a regular expression match." msgstr "" #: Mailman/Gui/Privacy.py:375 msgid "" "If dmarc_moderation_action applies and is Wrap Message,\n" " and this text is provided, the text will be placed in a\n" " separate text/plain MIME part preceding the original message\n" " part in the wrapped message." msgstr "" #: Mailman/Gui/Privacy.py:380 msgid "" "A wrapped message will either be a multipart/mixed message\n" " with up to four sub-parts; a text/plain part containing\n" " msg_header, a text/plain part containing \n" " dmarc_wrapped_message_text, a message/rfc822 part containing the\n" " original message and a text/plain part containing msg_footer, or\n" " a message/rfc822 message containing only the original message if\n" " none of the other parts are applicable." msgstr "" #: Mailman/Gui/Privacy.py:389 msgid "" "A 'two dimensional' list of email address domains which are\n" " considered equivalent when checking if a post is from a list\n" " member." msgstr "" #: Mailman/Gui/Privacy.py:393 msgid "" "If two poster addresses with the same local part but\n" " different domains are to be considered equivalents for list\n" " membership tests, the domains are put here. The format is\n" " one or more groups of equivalent domains. Within a group,\n" " the domains are separated by commas and multiple groups are\n" " separated by semicolons. White space is ignored.\n" "

      For example:

      \n"
"               example.com,mail.example.com;mac.com,me.com,icloud.com\n"
"
      \n" "

      In this example, if user@example.com is a list member,\n" " a post from user@mail.example.com will be treated as if it is\n" " from user@example.com for list membership/moderation purposes,\n" " and likewise, if user@me.com is a list member, posts from\n" " user@mac.com or user@icloud.com will be treated as if from\n" " user@me.com.\n" "

      Note that the poster's address is first tested for list\n" " membership, and the equivalent domain addresses are only tested\n" " if the poster's address is not that of a member.\n" "

      Also note that moderation of the equivalent domain address\n" " will apply to the post, but other options such as 'ack' or\n" " 'not metoo' will not." msgstr "" #: Mailman/Gui/Privacy.py:415 msgid "Non-member filters" msgstr "" #: Mailman/Gui/Privacy.py:418 msgid "" "List of non-member addresses whose postings should be\n" " automatically accepted." msgstr "" #: Mailman/Gui/Privacy.py:425 msgid "" "Postings from any of these non-members will be automatically\n" " accepted with no further moderation applied. Add member\n" " addresses one per line; start the line with a ^ character to\n" " designate a regular expression match. A line consisting of\n" " the @ character followed by a list name specifies another\n" " Mailman list in this installation, all of whose member\n" " addresses will be accepted for this list." msgstr "" #: Mailman/Gui/Privacy.py:434 msgid "" "List of non-member addresses whose postings will be\n" " immediately held for moderation." msgstr "" #: Mailman/Gui/Privacy.py:437 msgid "" "Postings from any of these non-members will be immediately\n" " and automatically held for moderation by the list moderators.\n" " The sender will receive a notification message which will allow\n" " them to cancel their held message. Add member addresses one per\n" " line; start the line with a ^ character to designate a regular\n" " expression match." msgstr "" #: Mailman/Gui/Privacy.py:445 msgid "" "List of non-member addresses whose postings will be\n" " automatically rejected." msgstr "" #: Mailman/Gui/Privacy.py:448 msgid "" "Postings from any of these non-members will be automatically\n" " rejected. In other words, their messages will be bounced back to\n" " the sender with a notification of automatic rejection. This\n" " option is not appropriate for known spam senders; their messages\n" " should be\n" " automatically discarded.\n" "\n" "

      Add member addresses one per line; start the line with a ^\n" " character to designate a regular expression match." msgstr "" #: Mailman/Gui/Privacy.py:460 msgid "" "List of non-member addresses whose postings will be\n" " automatically discarded." msgstr "" #: Mailman/Gui/Privacy.py:463 msgid "" "Postings from any of these non-members will be automatically\n" " discarded. That is, the message will be thrown away with no\n" " further processing or notification. The sender will not receive\n" " a notification or a bounce, however the list moderators can\n" " optionally receive copies of auto-discarded messages..\n" "\n" "

      Add member addresses one per line; start the line with a ^\n" " character to designate a regular expression match." msgstr "" #: Mailman/Gui/Privacy.py:475 msgid "" "Action to take for postings from non-members for which no\n" " explicit action is defined." msgstr "" #: Mailman/Gui/Privacy.py:478 msgid "" "When a post from a non-member is received, the message's\n" " sender is matched against the list of explicitly\n" " accepted,\n" " held,\n" " rejected (bounced), and\n" " discarded addresses. If no match is found, then this action\n" " is taken." msgstr "" #: Mailman/Gui/Privacy.py:490 msgid "" "Should messages from non-members, which are automatically\n" " discarded, be forwarded to the list moderator?" msgstr "" #: Mailman/Gui/Privacy.py:494 msgid "" "Text to include in any rejection notice to be sent to\n" " non-members who post to this list. This notice can include\n" " the list's owner address by %%(listowner)s and replaces the\n" " internally crafted default message." msgstr "" #: Mailman/Gui/Privacy.py:502 msgid "" "This section allows you to configure various filters based on\n" " the recipient of the message." msgstr "" #: Mailman/Gui/Privacy.py:505 msgid "Recipient filters" msgstr "" #: Mailman/Gui/Privacy.py:509 msgid "" "Must posts have list named in destination (to, cc) field\n" " (or be among the acceptable alias names, specified below)?" msgstr "" #: Mailman/Gui/Privacy.py:512 msgid "" "Many (in fact, most) spams do not explicitly name their\n" " myriad destinations in the explicit destination addresses - in\n" " fact often the To: field has a totally bogus address for\n" " obfuscation. The constraint applies only to the stuff in the\n" " address before the '@' sign, but still catches all such spams.\n" "\n" "

      The cost is that the list will not accept unhindered any\n" " postings relayed from other addresses, unless\n" "\n" "

        \n" "
      1. The relaying address has the same name, or\n" "\n" "
      2. The relaying address name is included on the options that\n" " specifies acceptable aliases for the list.\n" "\n" "
      " msgstr "" #: Mailman/Gui/Privacy.py:530 msgid "" "Alias names (regexps) which qualify as explicit to or cc\n" " destination names for this list." msgstr "" #: Mailman/Gui/Privacy.py:533 msgid "" "Alternate addresses that are acceptable when\n" " `require_explicit_destination' is enabled. This option takes a\n" " list of regular expressions, one per line, which is matched\n" " against every recipient address in the message. The matching is\n" " performed with Python's re.match() function, meaning they are\n" " anchored to the start of the string.\n" " \n" "

      For backwards compatibility with Mailman 1.1, if the regexp\n" " does not contain an `@', then the pattern is matched against just\n" " the local part of the recipient address. If that match fails, or\n" " if the pattern does contain an `@', then the pattern is matched\n" " against the entire recipient address.\n" " \n" "

      Matching against the local part is deprecated; in a future\n" " release, the pattern will always be matched against the entire\n" " recipient address." msgstr "" #: Mailman/Gui/Privacy.py:551 msgid "Ceiling on acceptable number of recipients for a posting." msgstr "" #: Mailman/Gui/Privacy.py:553 msgid "" "If a posting has this number, or more, of recipients, it is\n" " held for admin approval. Use 0 for no ceiling." msgstr "" #: Mailman/Gui/Privacy.py:558 msgid "" "This section allows you to configure various anti-spam\n" " filters posting filters, which can help reduce the amount of spam\n" " your list members end up receiving.\n" " " msgstr "" #: Mailman/Gui/Privacy.py:563 msgid "Header filters" msgstr "" #: Mailman/Gui/Privacy.py:566 msgid "Filter rules to match against the headers of a message." msgstr "" #: Mailman/Gui/Privacy.py:568 msgid "" "Each header filter rule has two parts, a list of regular\n" " expressions, one per line, and an action to take. Mailman\n" " matches the message's headers against every regular expression in\n" " the rule and if any match, the message is rejected, held, or\n" " discarded based on the action you specify. Use Defer to\n" " temporarily disable a rule.\n" "\n" " You can have more than one filter rule for your list. In that\n" " case, each rule is matched in turn, with processing stopped after\n" " the first match.\n" "\n" " Note that headers are collected from all the attachments\n" " (except for the mailman administrivia message) and\n" " matched against the regular expressions. With this feature,\n" " you can effectively sort out messages with dangerous file\n" " types or file name extensions." msgstr "" #: Mailman/Gui/Privacy.py:585 msgid "Legacy anti-spam filters" msgstr "" #: Mailman/Gui/Privacy.py:588 msgid "Hold posts with header value matching a specified regexp." msgstr "" #: Mailman/Gui/Privacy.py:589 msgid "" "Use this option to prohibit posts according to specific\n" " header values. The target value is a regular-expression for\n" " matching against the specified header. The match is done\n" " disregarding letter case. Lines beginning with '#' are ignored\n" " as comments.\n" "\n" "

      For example:

      to: .*@public.com
      says to hold all\n" " postings with a To: mail header containing '@public.com'\n" " anywhere among the addresses.\n" "\n" "

      Note that leading whitespace is trimmed from the regexp. This\n" " can be circumvented in a number of ways, e.g. by escaping or\n" " bracketing it." msgstr "" #: Mailman/Gui/Privacy.py:624 msgid "" "dmarc_moderation_action must be >= the configured\n" " default value." msgstr "" #: Mailman/Gui/Privacy.py:674 msgid "" "Header filter rules require a pattern.\n" " Incomplete filter rules will be ignored." msgstr "" #: Mailman/Gui/Privacy.py:693 msgid "" "The header filter rule pattern\n" " '%(safepattern)s' is not a legal regular expression. This\n" " rule will be ignored." msgstr "" #: Mailman/Gui/Topics.py:38 msgid "Topics" msgstr "" #: Mailman/Gui/Topics.py:46 msgid "List topic keywords" msgstr "" #: Mailman/Gui/Topics.py:48 msgid "Disabled" msgstr "" #: Mailman/Gui/Topics.py:48 msgid "Enabled" msgstr "" #: Mailman/Gui/Topics.py:49 msgid "Should the topic filter be enabled or disabled?" msgstr "" #: Mailman/Gui/Topics.py:51 msgid "" "The topic filter categorizes each incoming email message\n" " according to regular\n" " expression filters you specify below. If the message's\n" " Subject: or Keywords: header contains a\n" " match against a topic filter, the message is logically placed\n" " into a topic bucket. Each user can then choose to only\n" " receive messages from the mailing list for a particular topic\n" " bucket (or buckets). Any message not categorized in a topic\n" " bucket registered with the user is not delivered to the list.\n" "\n" "

      Note that this feature only works with regular delivery, not\n" " digest delivery.\n" "\n" "

      The body of the message can also be optionally scanned for\n" " Subject: and Keywords: headers, as\n" " specified by the topics_bodylines_limit\n" " configuration variable." msgstr "" #: Mailman/Gui/Topics.py:72 msgid "How many body lines should the topic matcher scan?" msgstr "" #: Mailman/Gui/Topics.py:74 msgid "" "The topic matcher will scan this many lines of the message\n" " body looking for topic keyword matches. Body scanning stops when\n" " either this many lines have been looked at, or a non-header-like\n" " body line is encountered. By setting this value to zero, no body\n" " lines will be scanned (i.e. only the Keywords: and\n" " Subject: headers will be scanned). By setting this\n" " value to a negative number, then all body lines will be scanned\n" " until a non-header-like line is encountered.\n" " " msgstr "" #: Mailman/Gui/Topics.py:85 msgid "Topic keywords, one per line, to match against each message." msgstr "" #: Mailman/Gui/Topics.py:87 msgid "" "Each topic keyword is actually a regular expression, which is\n" " matched against certain parts of a mail message, specifically the\n" " Keywords: and Subject: message headers.\n" " Note that the first few lines of the body of the message can also\n" " contain a Keywords: and Subject:\n" " \"header\" on which matching is also performed." msgstr "" #: Mailman/Gui/Topics.py:125 msgid "" "Topic specifications require both a name and\n" " a pattern. Incomplete topics will be ignored." msgstr "" #: Mailman/Gui/Topics.py:135 msgid "" "The topic pattern '%(safepattern)s' is not a\n" " legal regular expression. It will be discarded." msgstr "" #: Mailman/Gui/Usenet.py:25 msgid "Mail<->News gateways" msgstr "" #: Mailman/Gui/Usenet.py:35 msgid "Mail-to-News and News-to-Mail gateway services." msgstr "" #: Mailman/Gui/Usenet.py:37 msgid "News server settings" msgstr "" #: Mailman/Gui/Usenet.py:40 msgid "The hostname of the machine your news server is running on." msgstr "" #: Mailman/Gui/Usenet.py:41 msgid "" "This value may be either the name of your news server, or\n" " optionally of the format name:port, where port is a port number.\n" "\n" " The news server is not part of Mailman proper. You have to\n" " already have access to an NNTP server, and that NNTP server must\n" " recognize the machine this mailing list runs on as a machine\n" " capable of reading and posting news." msgstr "" #: Mailman/Gui/Usenet.py:50 msgid "The name of the Usenet group to gateway to and/or from." msgstr "" #: Mailman/Gui/Usenet.py:53 msgid "" "Should new posts to the mailing list be sent to the\n" " newsgroup?" msgstr "" #: Mailman/Gui/Usenet.py:57 msgid "" "Should new posts to the newsgroup be sent to the mailing\n" " list?" msgstr "" #: Mailman/Gui/Usenet.py:60 msgid "Forwarding options" msgstr "" #: Mailman/Gui/Usenet.py:63 msgid "Moderated" msgstr "" #: Mailman/Gui/Usenet.py:63 msgid "Open list, moderated group" msgstr "" #: Mailman/Gui/Usenet.py:66 msgid "The moderation policy of the newsgroup." msgstr "" #: Mailman/Gui/Usenet.py:68 msgid "" "This setting determines the moderation policy of the\n" " newsgroup and its interaction with the moderation policy of the\n" " mailing list. This only applies to the newsgroup that you are\n" " gatewaying to, so if you are only gatewaying from\n" " Usenet, or the newsgroup you are gatewaying to is not moderated,\n" " set this option to None.\n" "\n" "

      If the newsgroup is moderated, you can set this mailing list\n" " up to be the moderation address for the newsgroup. By selecting\n" " Moderated, an additional posting hold will be placed in\n" " the approval process. All messages posted to the mailing list\n" " will have to be approved before being sent on to the newsgroup,\n" " or to the mailing list membership.\n" "\n" "

      Note that if the message has an Approved header\n" " with the list's administrative password in it, this hold test\n" " will be bypassed, allowing privileged posters to send messages\n" " directly to the list and the newsgroup.\n" "\n" "

      Finally, if the newsgroup is moderated, but you want to have\n" " an open posting policy anyway, you should select Open list,\n" " moderated group. The effect of this is to use the normal\n" " Mailman moderation facilities, but to add an Approved\n" " header to all messages that are gatewayed to Usenet." msgstr "" #: Mailman/Gui/Usenet.py:94 msgid "Prefix Subject: headers on postings gated to news?" msgstr "" #: Mailman/Gui/Usenet.py:95 msgid "" "Mailman prefixes Subject: headers with\n" " text you can\n" " customize and normally, this prefix shows up in messages\n" " gatewayed to Usenet. You can set this option to No to\n" " disable the prefix on gated messages. Of course, if you turn off\n" " normal Subject: prefixes, they won't be prefixed for\n" " gated messages either." msgstr "" #: Mailman/Gui/Usenet.py:103 msgid "Mass catch up" msgstr "" #: Mailman/Gui/Usenet.py:106 msgid "Should Mailman perform a catchup on the newsgroup?" msgstr "" #: Mailman/Gui/Usenet.py:107 msgid "" "When you tell Mailman to perform a catchup on the newsgroup,\n" " this means that you want to start gating messages to the mailing\n" " list with the next new message found. All earlier messages on\n" " the newsgroup will be ignored. This is as if you were reading\n" " the newsgroup yourself, and you marked all current messages as\n" " read. By catching up, your mailing list members will\n" " not see any of the earlier messages." msgstr "" #: Mailman/Gui/Usenet.py:121 msgid "Mass catchup completed" msgstr "" #: Mailman/Gui/Usenet.py:133 msgid "" "You cannot enable gatewaying unless both the\n" " news server field and\n" " the linked\n" " newsgroup fields are filled in." msgstr "" #: Mailman/HTMLFormatter.py:49 msgid "%(listinfo_link)s list run by %(owner_link)s" msgstr "" #: Mailman/HTMLFormatter.py:57 msgid "%(realname)s administrative interface" msgstr "" #: Mailman/HTMLFormatter.py:58 msgid " (requires authorization)" msgstr "" #: Mailman/HTMLFormatter.py:61 msgid "Overview of all %(hostname)s mailing lists" msgstr "" #: Mailman/HTMLFormatter.py:78 msgid "(1 private member not shown)" msgstr "" #: Mailman/HTMLFormatter.py:80 msgid "(%(num_concealed)d private members not shown)" msgstr "" #: Mailman/HTMLFormatter.py:140 msgid "; it was disabled by you" msgstr "" #: Mailman/HTMLFormatter.py:142 msgid "; it was disabled by the list administrator" msgstr "" #: Mailman/HTMLFormatter.py:146 msgid "" "; it was disabled due to excessive bounces. The\n" " last bounce was received on %(date)s" msgstr "" #: Mailman/HTMLFormatter.py:149 msgid "; it was disabled for unknown reasons" msgstr "" #: Mailman/HTMLFormatter.py:151 msgid "Note: your list delivery is currently disabled%(reason)s." msgstr "" #: Mailman/HTMLFormatter.py:154 msgid "Mail delivery" msgstr "" #: Mailman/HTMLFormatter.py:156 Mailman/HTMLFormatter.py:301 msgid "the list administrator" msgstr "" #: Mailman/HTMLFormatter.py:157 msgid "" "

      %(note)s\n" "\n" "

      You may have disabled list delivery intentionally,\n" " or it may have been triggered by bounces from your email\n" " address. In either case, to re-enable delivery, change the\n" " %(link)s option below. Contact %(mailto)s if you have any\n" " questions or need assistance." msgstr "" #: Mailman/HTMLFormatter.py:169 msgid "" "

      We have received some recent bounces from your\n" " address. Your current bounce score is %(score)s out of a\n" " maximum of %(total)s. Please double check that your subscribed\n" " address is correct and that there are no problems with delivery to\n" " this address. Your bounce score will be automatically reset if\n" " the problems are corrected soon." msgstr "" #: Mailman/HTMLFormatter.py:181 msgid "(Note - you are subscribing to a list of mailing lists, so the %(type)s notice will be sent to the admin address for your membership, %(addr)s.)

      " msgstr "" #: Mailman/HTMLFormatter.py:191 msgid "" "You will be sent email requesting confirmation, to\n" " prevent others from gratuitously subscribing you." msgstr "" #: Mailman/HTMLFormatter.py:194 msgid "" "This is a closed list, which means your subscription\n" " will be held for approval. You will be notified of the list\n" " moderator's decision by email." msgstr "" #: Mailman/HTMLFormatter.py:197 Mailman/HTMLFormatter.py:204 msgid "also " msgstr "" #: Mailman/HTMLFormatter.py:199 msgid "" "You will be sent email requesting confirmation, to\n" " prevent others from gratuitously subscribing you. Once\n" " confirmation is received, your request will be held for approval\n" " by the list moderator. You will be notified of the moderator's\n" " decision by email." msgstr "" #: Mailman/HTMLFormatter.py:208 msgid "" "This is %(also)sa private list, which means that the\n" " list of members is not available to non-members." msgstr "" #: Mailman/HTMLFormatter.py:211 msgid "" "This is %(also)sa hidden list, which means that the\n" " list of members is available only to the list administrator." msgstr "" #: Mailman/HTMLFormatter.py:214 msgid "" "This is %(also)sa public list, which means that the\n" " list of members list is available to everyone." msgstr "" #: Mailman/HTMLFormatter.py:217 msgid "" " (but we obscure the addresses so they are not\n" " easily recognizable by spammers)." msgstr "" #: Mailman/HTMLFormatter.py:222 msgid "" "

      (Note that this is an umbrella list, intended to\n" " have only other mailing lists as members. Among other things,\n" " this means that your confirmation request will be sent to the\n" " `%(sfx)s' account for your address.)" msgstr "" #: Mailman/HTMLFormatter.py:251 msgid "either " msgstr "" #: Mailman/HTMLFormatter.py:256 msgid "" "To unsubscribe from %(realname)s, get a password reminder,\n" " or change your subscription options %(either)senter your subscription\n" " email address:\n" "

      " msgstr "" #: Mailman/HTMLFormatter.py:263 msgid "Unsubscribe or edit options" msgstr "" #: Mailman/HTMLFormatter.py:267 msgid "" "

      ... or select your entry from\n" " the subscribers list (see above)." msgstr "" #: Mailman/HTMLFormatter.py:269 msgid "" " If you leave the field blank, you will be prompted for\n" " your email address" msgstr "" #: Mailman/HTMLFormatter.py:277 msgid "" "(%(which)s is only available to the list\n" " members.)" msgstr "" #: Mailman/HTMLFormatter.py:281 msgid "" "(%(which)s is only available to the list\n" " administrator.)" msgstr "" #: Mailman/HTMLFormatter.py:291 msgid "Click here for the list of " msgstr "" #: Mailman/HTMLFormatter.py:293 msgid " subscribers: " msgstr "" #: Mailman/HTMLFormatter.py:295 msgid "Visit Subscriber list" msgstr "" #: Mailman/HTMLFormatter.py:298 msgid "members" msgstr "" #: Mailman/HTMLFormatter.py:299 msgid "Address:" msgstr "" #: Mailman/HTMLFormatter.py:302 msgid "Admin address:" msgstr "" #: Mailman/HTMLFormatter.py:305 msgid "The subscribers list" msgstr "" #: Mailman/HTMLFormatter.py:307 msgid "

      Enter your " msgstr "" #: Mailman/HTMLFormatter.py:309 msgid " and password to visit the subscribers list:

      " msgstr "" #: Mailman/HTMLFormatter.py:314 msgid "Password: " msgstr "" #: Mailman/HTMLFormatter.py:318 msgid "Visit Subscriber List" msgstr "" #: Mailman/HTMLFormatter.py:357 msgid "Once a month, your password will be emailed to you as a reminder." msgstr "" #: Mailman/HTMLFormatter.py:409 msgid "The current archive" msgstr "" #: Mailman/Handlers/Acknowledge.py:59 msgid "%(realname)s post acknowledgement" msgstr "" #: Mailman/Handlers/Approve.py:45 msgid "" "Message rejected.\n" "It appears that this message contains an HTML part with the\n" "Approved: password line, but due to the way it is coded in the\n" "HTML it can't be safely removed.\n" msgstr "" #: Mailman/Handlers/CalcRecips.py:79 msgid "" "Your urgent message to the %(realname)s mailing list was not authorized for\n" "delivery. The original message as received by Mailman is attached.\n" msgstr "" #: Mailman/Handlers/CookHeaders.py:180 msgid "%(realname)s via %(lrn)s" msgstr "" #: Mailman/Handlers/Emergency.py:29 msgid "Emergency hold on all list traffic is in effect" msgstr "" #: Mailman/Handlers/Emergency.py:30 Mailman/Handlers/Hold.py:58 msgid "Your message was deemed inappropriate by the moderator." msgstr "" #: Mailman/Handlers/Hold.py:53 msgid "Sender is explicitly forbidden" msgstr "" #: Mailman/Handlers/Hold.py:54 msgid "You are forbidden from posting messages to this list." msgstr "" #: Mailman/Handlers/Hold.py:57 msgid "Post to moderated list" msgstr "" #: Mailman/Handlers/Hold.py:61 msgid "Post by non-member to a members-only list" msgstr "" #: Mailman/Handlers/Hold.py:62 msgid "Non-members are not allowed to post messages to this list." msgstr "" #: Mailman/Handlers/Hold.py:65 msgid "Posting to a restricted list by sender requires approval" msgstr "" #: Mailman/Handlers/Hold.py:66 msgid "This list is restricted; your message was not approved." msgstr "" #: Mailman/Handlers/Hold.py:69 msgid "Too many recipients to the message" msgstr "" #: Mailman/Handlers/Hold.py:70 msgid "Please trim the recipient list; it is too long." msgstr "" #: Mailman/Handlers/Hold.py:73 msgid "Message has implicit destination" msgstr "" #: Mailman/Handlers/Hold.py:74 msgid "" "Blind carbon copies or other implicit destinations are\n" "not allowed. Try reposting your message by explicitly including the list\n" "address in the To: or Cc: fields." msgstr "" #: Mailman/Handlers/Hold.py:79 msgid "Message may contain administrivia" msgstr "" #: Mailman/Handlers/Hold.py:84 msgid "" "Please do *not* post administrative requests to the mailing\n" "list. If you wish to subscribe, visit %(listurl)s or send a message with the\n" "word `help' in it to the request address, %(request)s, for further\n" "instructions." msgstr "" #: Mailman/Handlers/Hold.py:90 msgid "Message has a suspicious header" msgstr "" #: Mailman/Handlers/Hold.py:91 msgid "Your message had a suspicious header." msgstr "" #: Mailman/Handlers/Hold.py:101 msgid "" "Message body is too big: %(size)d bytes with a limit of\n" "%(limit)d KB" msgstr "" #: Mailman/Handlers/Hold.py:106 msgid "" "Your message was too big; please trim it to less than\n" "%(kb)d KB in size." msgstr "" #: Mailman/Handlers/Hold.py:110 msgid "Posting to a moderated newsgroup" msgstr "" #: Mailman/Handlers/Hold.py:252 msgid "Your message to %(listname)s awaits moderator approval" msgstr "" #: Mailman/Handlers/Hold.py:271 msgid "%(listname)s post from %(sender)s requires approval" msgstr "" #: Mailman/Handlers/Hold.py:278 msgid "" "If you reply to this message, keeping the Subject: header intact, Mailman will\n" "discard the held message. Do this if the message is spam. If you reply to\n" "this message and include an Approved: header with the list password in it, the\n" "message will be approved for posting to the list. The Approved: header can\n" "also appear in the first line of the body of the reply." msgstr "" #: Mailman/Handlers/MimeDel.py:59 msgid "The message's content type was explicitly disallowed" msgstr "" #: Mailman/Handlers/MimeDel.py:64 msgid "The message's content type was not explicitly allowed" msgstr "" #: Mailman/Handlers/MimeDel.py:72 msgid "The message's file extension was explicitly disallowed" msgstr "" #: Mailman/Handlers/MimeDel.py:75 msgid "The message's file extension was not explicitly allowed" msgstr "" #: Mailman/Handlers/MimeDel.py:87 msgid "After content filtering, the message was empty" msgstr "" #: Mailman/Handlers/MimeDel.py:269 msgid "" "The attached message matched the %(listname)s mailing list's content filtering\n" "rules and was prevented from being forwarded on to the list membership. You\n" "are receiving the only remaining copy of the discarded message.\n" "\n" msgstr "" #: Mailman/Handlers/MimeDel.py:275 msgid "Content filtered message notification" msgstr "" #: Mailman/Handlers/Moderate.py:145 msgid "" "Your message has been rejected, probably because you are not subscribed to the\n" "mailing list and the list's policy is to prohibit non-members from posting to\n" "it. If you think that your messages are being rejected in error, contact the\n" "mailing list owner at %(listowner)s." msgstr "" #: Mailman/Handlers/Moderate.py:162 msgid "Auto-discard notification" msgstr "" #: Mailman/Handlers/Moderate.py:165 msgid "The attached message has been automatically discarded." msgstr "" #: Mailman/Handlers/Replybot.py:75 msgid "Auto-response for your message to the \"%(realname)s\" mailing list" msgstr "" #: Mailman/Handlers/Replybot.py:108 msgid "The Mailman Replybot" msgstr "" #: Mailman/Handlers/Scrubber.py:208 msgid "" "An embedded and charset-unspecified text was scrubbed...\n" "Name: %(filename)s\n" "URL: %(url)s\n" msgstr "" #: Mailman/Handlers/Scrubber.py:218 msgid "HTML attachment scrubbed and removed" msgstr "" #: Mailman/Handlers/Scrubber.py:234 Mailman/Handlers/Scrubber.py:259 msgid "" "An HTML attachment was scrubbed...\n" "URL: %(url)s\n" msgstr "" #: Mailman/Handlers/Scrubber.py:271 msgid "no subject" msgstr "" #: Mailman/Handlers/Scrubber.py:273 msgid "no date" msgstr "" #: Mailman/Handlers/Scrubber.py:274 msgid "unknown sender" msgstr "" #: Mailman/Handlers/Scrubber.py:276 msgid "" "An embedded message was scrubbed...\n" "From: %(who)s\n" "Subject: %(subject)s\n" "Date: %(date)s\n" "Size: %(size)s\n" "URL: %(url)s\n" msgstr "" #: Mailman/Handlers/Scrubber.py:308 msgid "" "A non-text attachment was scrubbed...\n" "Name: %(filename)s\n" "Type: %(ctype)s\n" "Size: %(size)d bytes\n" "Desc: %(desc)s\n" "URL: %(url)s\n" msgstr "" #: Mailman/Handlers/Scrubber.py:347 msgid "" "Skipped content of type %(partctype)s\n" msgstr "" #: Mailman/Handlers/Scrubber.py:388 msgid "" "-------------- next part --------------\n" msgstr "" #: Mailman/Handlers/SpamDetect.py:64 msgid "Header matched regexp: %(pattern)s" msgstr "" #: Mailman/Handlers/SpamDetect.py:127 msgid "" "You are not allowed to post to this mailing list From: a domain which\n" "publishes a DMARC policy of reject or quarantine, and your message has been\n" "automatically rejected. If you think that your messages are being rejected in\n" "error, contact the mailing list owner at %(listowner)s." msgstr "" #: Mailman/Handlers/SpamDetect.py:197 msgid "Message rejected by filter rule match" msgstr "" #: Mailman/Handlers/ToDigest.py:173 msgid "%(realname)s Digest, Vol %(volume)d, Issue %(issue)d" msgstr "" #: Mailman/Handlers/ToDigest.py:219 msgid "digest header" msgstr "" #: Mailman/Handlers/ToDigest.py:222 msgid "Digest Header" msgstr "" #: Mailman/Handlers/ToDigest.py:235 msgid "" "Today's Topics:\n" msgstr "" #: Mailman/Handlers/ToDigest.py:315 msgid "Today's Topics (%(msgcount)d messages)" msgstr "" #: Mailman/Handlers/ToDigest.py:341 msgid "[Message discarded by content filter]" msgstr "" #: Mailman/Handlers/ToDigest.py:369 msgid "digest footer" msgstr "" #: Mailman/Handlers/ToDigest.py:372 Mailman/Handlers/ToDigest.py:380 msgid "Digest Footer" msgstr "" #: Mailman/Handlers/ToDigest.py:387 msgid "End of " msgstr "" #: Mailman/ListAdmin.py:309 msgid "Posting of your message titled \"%(subject)s\"" msgstr "" #: Mailman/ListAdmin.py:310 Mailman/ListAdmin.py:433 msgid "[No reason given]" msgstr "" #: Mailman/ListAdmin.py:348 msgid "Forward of moderated message" msgstr "" #: Mailman/ListAdmin.py:405 msgid "New subscription request to list %(realname)s from %(addr)s" msgstr "" #: Mailman/ListAdmin.py:432 msgid "Subscription request" msgstr "" #: Mailman/ListAdmin.py:442 msgid "via admin approval" msgstr "" #: Mailman/ListAdmin.py:466 msgid "New unsubscription request from %(realname)s by %(addr)s" msgstr "" #: Mailman/ListAdmin.py:490 msgid "Unsubscription request" msgstr "" #: Mailman/ListAdmin.py:523 msgid "Original Message" msgstr "" #: Mailman/ListAdmin.py:526 msgid "Request to mailing list %(realname)s rejected" msgstr "" #: Mailman/MTA/Manual.py:66 msgid "" "The mailing list `%(listname)s' has been created via the through-the-web\n" "interface. In order to complete the activation of this mailing list, the\n" "proper /etc/aliases (or equivalent) file must be updated. The program\n" "`newaliases' may also have to be run.\n" "\n" "Here are the entries for the /etc/aliases file:\n" msgstr "" #: Mailman/MTA/Manual.py:77 msgid "" "To finish creating your mailing list, you must edit your /etc/aliases (or\n" "equivalent) file by adding the following lines, and possibly running the\n" "`newaliases' program:\n" msgstr "" #: Mailman/MTA/Manual.py:82 msgid "## %(listname)s mailing list" msgstr "" #: Mailman/MTA/Manual.py:99 msgid "Mailing list creation request for list %(listname)s" msgstr "" #: Mailman/MTA/Manual.py:113 msgid "" "The mailing list `%(listname)s' has been removed via the through-the-web\n" "interface. In order to complete the de-activation of this mailing list, the\n" "appropriate /etc/aliases (or equivalent) file must be updated. The program\n" "`newaliases' may also have to be run.\n" "\n" "Here are the entries in the /etc/aliases file that should be removed:\n" msgstr "" #: Mailman/MTA/Manual.py:123 msgid "" "\n" "To finish removing your mailing list, you must edit your /etc/aliases (or\n" "equivalent) file by removing the following lines, and possibly running the\n" "`newaliases' program:\n" "\n" "## %(listname)s mailing list" msgstr "" #: Mailman/MTA/Manual.py:142 msgid "Mailing list removal request for list %(listname)s" msgstr "" #: Mailman/MTA/Postfix.py:442 msgid "checking permissions on %(file)s" msgstr "" #: Mailman/MTA/Postfix.py:452 msgid "%(file)s permissions must be 0664 (got %(octmode)s)" msgstr "" #: Mailman/MTA/Postfix.py:454 Mailman/MTA/Postfix.py:482 #: Mailman/MTA/Postfix.py:493 bin/check_perms:125 bin/check_perms:153 #: bin/check_perms:163 bin/check_perms:174 bin/check_perms:199 #: bin/check_perms:216 bin/check_perms:242 bin/check_perms:265 #: bin/check_perms:284 bin/check_perms:298 bin/check_perms:318 #: bin/check_perms:358 msgid "(fixing)" msgstr "" #: Mailman/MTA/Postfix.py:470 msgid "checking ownership of %(dbfile)s" msgstr "" #: Mailman/MTA/Postfix.py:478 msgid "%(dbfile)s owned by %(owner)s (must be owned by %(user)s" msgstr "" #: Mailman/MTA/Postfix.py:491 msgid "%(dbfile)s permissions must be 0664 (got %(octmode)s)" msgstr "" #: Mailman/MailList.py:219 msgid "Your confirmation is required to join the %(listname)s mailing list" msgstr "" #: Mailman/MailList.py:230 msgid "Your confirmation is required to leave the %(listname)s mailing list" msgstr "" #: Mailman/MailList.py:999 Mailman/MailList.py:1492 msgid " from %(remote)s" msgstr "" #: Mailman/MailList.py:1043 msgid "subscriptions to %(realname)s require moderator approval" msgstr "" #: Mailman/MailList.py:1125 bin/add_members:299 msgid "%(realname)s subscription notification" msgstr "" #: Mailman/MailList.py:1145 msgid "unsubscriptions require moderator approval" msgstr "" #: Mailman/MailList.py:1166 msgid "%(realname)s unsubscribe notification" msgstr "" #: Mailman/MailList.py:1328 msgid "%(realname)s address change notification" msgstr "" #: Mailman/MailList.py:1362 msgid "via email confirmation" msgstr "" #: Mailman/MailList.py:1371 msgid "via web confirmation" msgstr "" #: Mailman/MailList.py:1396 msgid "subscriptions to %(name)s require administrator approval" msgstr "" #: Mailman/MailList.py:1406 msgid "email confirmation" msgstr "" #: Mailman/MailList.py:1408 msgid "web confirmation" msgstr "" #: Mailman/MailList.py:1666 msgid "Last autoresponse notification for today" msgstr "" #: Mailman/Queue/BounceRunner.py:360 msgid "" "The attached message was received as a bounce, but either the bounce format\n" "was not recognized, or no member addresses could be extracted from it. This\n" "mailing list has been configured to send all unrecognized bounce messages to\n" "the list administrator(s).\n" "\n" "For more information see:\n" "%(adminurl)s\n" "\n" msgstr "" #: Mailman/Queue/BounceRunner.py:370 msgid "Uncaught bounce notification" msgstr "" #: Mailman/Queue/CommandRunner.py:98 msgid "Ignoring non-text/plain MIME parts" msgstr "" #: Mailman/Queue/CommandRunner.py:177 msgid "" "The results of your email command are provided below.\n" "Attached is your original message.\n" msgstr "" #: Mailman/Queue/CommandRunner.py:182 msgid "- Results:" msgstr "" #: Mailman/Queue/CommandRunner.py:188 msgid "" "\n" "- Unprocessed:" msgstr "" #: Mailman/Queue/CommandRunner.py:192 msgid "" "No commands were found in this message.\n" "To obtain instructions, send a message containing just the word \"help\".\n" msgstr "" #: Mailman/Queue/CommandRunner.py:197 msgid "" "\n" "- Ignored:" msgstr "" #: Mailman/Queue/CommandRunner.py:199 msgid "" "\n" "- Done.\n" "\n" msgstr "" #: Mailman/Queue/CommandRunner.py:223 msgid "The results of your email commands" msgstr "" #: Mailman/Queue/CommandRunner.py:229 msgid "" "Message body suppressed by Mailman site configuration\n" msgstr "" #: Mailman/Queue/CommandRunner.py:231 msgid "" "Original message suppressed by Mailman site configuration\n" msgstr "" #: Mailman/htmlformat.py:675 msgid "Delivered by Mailman
      version %(version)s" msgstr "" #: Mailman/htmlformat.py:676 msgid "Python Powered" msgstr "" #: Mailman/htmlformat.py:677 msgid "Gnu's Not Unix" msgstr "" #: Mailman/i18n.py:132 msgid "Mon" msgstr "" #: Mailman/i18n.py:132 msgid "Thu" msgstr "" #: Mailman/i18n.py:132 msgid "Tue" msgstr "" #: Mailman/i18n.py:132 msgid "Wed" msgstr "" #: Mailman/i18n.py:133 msgid "Fri" msgstr "" #: Mailman/i18n.py:133 msgid "Sat" msgstr "" #: Mailman/i18n.py:133 msgid "Sun" msgstr "" #: Mailman/i18n.py:137 msgid "Apr" msgstr "" #: Mailman/i18n.py:137 msgid "Feb" msgstr "" #: Mailman/i18n.py:137 msgid "Jan" msgstr "" #: Mailman/i18n.py:137 msgid "Jun" msgstr "" #: Mailman/i18n.py:137 msgid "Mar" msgstr "" #: Mailman/i18n.py:138 msgid "Aug" msgstr "" #: Mailman/i18n.py:138 msgid "Dec" msgstr "" #: Mailman/i18n.py:138 msgid "Jul" msgstr "" #: Mailman/i18n.py:138 msgid "Nov" msgstr "" #: Mailman/i18n.py:138 msgid "Oct" msgstr "" #: Mailman/i18n.py:138 msgid "Sep" msgstr "" #: Mailman/i18n.py:141 msgid "Server Local Time" msgstr "" #: Mailman/i18n.py:180 msgid "%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i" msgstr "" #: bin/add_members:22 #, docstring msgid "" "Add members to a list from the command line.\n" "\n" "Usage:\n" " add_members [options] listname\n" "\n" "Options:\n" "\n" " --regular-members-file=file\n" " -r file\n" " A file containing addresses of the members to be added, one\n" " address per line. This list of people become non-digest\n" " members. If file is `-', read addresses from stdin.\n" "\n" " --digest-members-file=file\n" " -d file\n" " Similar to above, but these people become digest members.\n" "\n" " --invite\n" " -i\n" " Specify this if you only want to invite the users to a list\n" " instead of subscribing them.\n" "\n" " --invite-msg-file=file\n" " -m file\n" " This will prepend the message in the file to the invite email that\n" " gets generated when --invite is set.\n" "\n" " --welcome-msg=\n" " -w \n" " Set whether or not to send the list members a welcome message,\n" " overriding whatever the list's `send_welcome_msg' setting is. This\n" " is ignored and the list's setting at the time of acceptance is used\n" " if --invite is set.\n" "\n" " --admin-notify=\n" " -a \n" " Set whether or not to send the list administrators a notification on\n" " the success/failure of these subscriptions, overriding whatever the\n" " list's `admin_notify_mchanges' setting is. This is ignored and the\n" " list's setting at the time of acceptance is used if --invite is set.\n" "\n" " --nomail\n" " -n\n" " Set the newly added members mail delivery to disabled by admin. This\n" " is ignored if --invite is set.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname\n" " The name of the Mailman list you are adding members to. It must\n" " already exist.\n" "\n" "You must supply at least one of -r and -d options. At most one of the\n" "files can be `-'.\n" msgstr "" #: bin/add_members:162 bin/add_members:172 msgid "Already a member: %(member)s" msgstr "" #: bin/add_members:178 msgid "Bad/Invalid email address: blank line" msgstr "" #: bin/add_members:180 msgid "Bad/Invalid email address: %(member)s" msgstr "" #: bin/add_members:182 msgid "Hostile address (illegal characters): %(member)s" msgstr "" #: bin/add_members:185 msgid "Invited: %(member)s" msgstr "" #: bin/add_members:187 msgid "Subscribed: %(member)s" msgstr "" #: bin/add_members:237 msgid "Bad argument to -w/--welcome-msg: %(arg)s" msgstr "" #: bin/add_members:244 msgid "Bad argument to -a/--admin-notify: %(arg)s" msgstr "" #: bin/add_members:252 msgid "Cannot read both digest and normal members from standard input." msgstr "" #: bin/add_members:256 msgid "Setting invite-msg-file requires --invite." msgstr "" #: bin/add_members:261 bin/config_list:110 bin/export.py:271 #: bin/find_member:97 bin/inject:91 bin/list_admins:90 bin/list_members:252 #: bin/sync_members:222 cron/bumpdigests:86 msgid "No such list: %(listname)s" msgstr "" #: bin/add_members:285 bin/change_pw:159 bin/check_db:114 bin/discard:83 #: bin/sync_members:244 bin/update:302 bin/update:323 bin/update:577 #: cron/bumpdigests:78 msgid "Nothing to do." msgstr "" #: bin/arch:19 #, docstring msgid "" "Rebuild a list's archive.\n" "\n" "Use this command to rebuild the archives for a mailing list. You may want to\n" "do this if you edit some messages in an archive, or remove some messages from\n" "an archive.\n" "\n" "Usage: %(PROGRAM)s [options] []\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" " -q / --quiet\n" " Make the archiver output less verbose.\n" "\n" " --wipe\n" " First wipe out the original archive before regenerating. You usually\n" " want to specify this argument unless you're generating the archive in\n" " chunks.\n" "\n" " -s N\n" " --start=N\n" " Start indexing at article N, where article 0 is the first in the mbox.\n" " Defaults to 0.\n" "\n" " -e M\n" " --end=M\n" " End indexing at article M. This script is not very efficient with\n" " respect to memory management, and for large archives, it may not be\n" " possible to index the mbox entirely. For that reason, you can specify\n" " the start and end article numbers.\n" "\n" "Where is the path to a list's complete mbox archive. Usually this will\n" "be some path in the archives/private directory. For example:\n" "\n" "%% bin/arch mylist archives/private/mylist.mbox/mylist.mbox\n" "\n" " is optional. If it is missing, it is calculated.\n" msgstr "" #: bin/arch:125 msgid "listname is required" msgstr "" #: bin/arch:143 bin/change_pw:107 bin/config_list:257 msgid "" "No such list \"%(listname)s\"\n" "%(e)s" msgstr "" #: bin/arch:168 msgid "Cannot open mbox file %(mbox)s: %(msg)s" msgstr "" #: bin/b4b5-archfix:19 #, docstring msgid "" "Fix the MM2.1b4 archives.\n" "\n" "Usage: %(PROGRAM)s [options] file ...\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" "Only use this to `fix' some archive database files that may have gotten\n" "written in Mailman 2.1b4 with some bogus data. Use like this from your\n" "$PREFIX directory\n" "\n" "%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n" "\n" "(note the backquotes are required)\n" "\n" "You will need to run `bin/check_perms -f' after running this script.\n" msgstr "" #: bin/change_pw:20 #, docstring msgid "" "Change a list's password.\n" "\n" "Prior to Mailman 2.1, list passwords were kept in crypt'd format -- usually.\n" "Some Python installations didn't have the crypt module available, so they'd\n" "fall back to md5. Then suddenly the Python installation might grow a crypt\n" "module and all list passwords would be broken.\n" "\n" "In Mailman 2.1, all list and site passwords are stored in SHA1 hexdigest\n" "form. This breaks list passwords for all existing pre-Mailman 2.1 lists, and\n" "since those passwords aren't stored anywhere in plain text, they cannot be\n" "retrieved and updated.\n" "\n" "Thus, this script generates new passwords for a list, and optionally sends it\n" "to all the owners of the list.\n" "\n" "Usage: change_pw [options]\n" "\n" "Options:\n" "\n" " --all / -a\n" " Change the password for all lists.\n" "\n" " --domain=domain\n" " -d domain\n" " Change the password for all lists in the virtual domain `domain'. It\n" " is okay to give multiple -d options.\n" "\n" " --listname=listname\n" " -l listname\n" " Change the password only for the named list. It is okay to give\n" " multiple -l options.\n" "\n" " --password=newpassword\n" " -p newpassword\n" " Use the supplied plain text password `newpassword' as the new password\n" " for any lists that are being changed (as specified by the -a, -d, and\n" " -l options). If not given, lists will be assigned a randomly\n" " generated new password.\n" "\n" " --quiet / -q\n" " Don't notify list owners of the new password. You'll have to have\n" " some other way of letting the list owners know the new password\n" " (presumably out-of-band).\n" "\n" " --help / -h\n" " Print this help message and exit.\n" msgstr "" #: bin/change_pw:145 msgid "Bad arguments: %(strargs)s" msgstr "" #: bin/change_pw:149 msgid "Empty list passwords are not allowed" msgstr "" #: bin/change_pw:181 msgid "New %(listname)s password: %(notifypassword)s" msgstr "" #: bin/change_pw:190 msgid "Your new %(listname)s list password" msgstr "" #: bin/change_pw:191 msgid "" "The site administrator at %(hostname)s has changed the password for your\n" "mailing list %(listname)s. It is now\n" "\n" " %(notifypassword)s\n" "\n" "Please be sure to use this for all future list administration. You may want\n" "to log in now to your list and change the password to something more to your\n" "liking. Visit your list admin page at\n" "\n" " %(adminurl)s\n" msgstr "" #: bin/check_db:19 #, docstring msgid "" "Check a list's config database file for integrity.\n" "\n" "All of the following files are checked:\n" "\n" " config.pck\n" " config.pck.last\n" " config.db\n" " config.db.last\n" " config.safety\n" "\n" "It's okay if any of these are missing. config.pck and config.pck.last are\n" "pickled versions of the config database file for 2.1a3 and beyond. config.db\n" "and config.db.last are used in all earlier versions, and these are Python\n" "marshals. config.safety is a pickle written by 2.1a3 and beyond when the\n" "primary config.pck file could not be read.\n" "\n" "Usage: %(PROGRAM)s [options] [listname [listname ...]]\n" "\n" "Options:\n" "\n" " --all / -a\n" " Check the databases for all lists. Otherwise only the lists named on\n" " the command line are checked.\n" "\n" " --verbose / -v\n" " Verbose output. The state of every tested file is printed.\n" " Otherwise only corrupt files are displayed.\n" "\n" " --help / -h\n" " Print this text and exit.\n" msgstr "" #: bin/check_db:119 msgid "No list named:" msgstr "" #: bin/check_db:128 msgid "List:" msgstr "" #: bin/check_db:148 msgid " %(file)s: okay" msgstr "" #: bin/check_perms:20 #, docstring msgid "" "Check the permissions for the Mailman installation.\n" "\n" "Usage: %(PROGRAM)s [-f] [-v] [-h]\n" "\n" "With no arguments, just check and report all the files that have bogus\n" "permissions or group ownership. With -f (and run as root), fix all the\n" "permission problems found. With -v be verbose.\n" msgstr "" #: bin/check_perms:110 msgid " checking gid and mode for %(path)s" msgstr "" #: bin/check_perms:122 msgid "%(path)s bad group (has: %(groupname)s, expected %(MAILMAN_GROUP)s)" msgstr "" #: bin/check_perms:151 msgid "directory permissions must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:160 msgid "source perms must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:171 msgid "article db files must be %(octperms)s: %(path)s" msgstr "" #: bin/check_perms:183 msgid "checking mode for %(prefix)s" msgstr "" #: bin/check_perms:193 msgid "WARNING: directory does not exist: %(d)s" msgstr "" #: bin/check_perms:197 msgid "directory must be at least 02775: %(d)s" msgstr "" #: bin/check_perms:209 msgid "checking perms on %(private)s" msgstr "" #: bin/check_perms:214 msgid "%(private)s must not be other-readable" msgstr "" #: bin/check_perms:223 msgid "" "Warning: Private archive directory is other-executable (o+x).\n" " This could allow other users on your system to read private archives.\n" " If you're on a shared multiuser system, you should consult the\n" " installation manual on how to fix this." msgstr "" #: bin/check_perms:240 msgid "mbox file must be at least 0660:" msgstr "" #: bin/check_perms:263 msgid "%(dbdir)s \"other\" perms must be 000" msgstr "" #: bin/check_perms:273 msgid "checking cgi-bin permissions" msgstr "" #: bin/check_perms:278 msgid " checking set-gid for %(path)s" msgstr "" #: bin/check_perms:282 msgid "%(path)s must be set-gid" msgstr "" #: bin/check_perms:292 msgid "checking set-gid for %(wrapper)s" msgstr "" #: bin/check_perms:296 msgid "%(wrapper)s must be set-gid" msgstr "" #: bin/check_perms:306 msgid "checking permissions on %(pwfile)s" msgstr "" #: bin/check_perms:315 msgid "%(pwfile)s permissions must be exactly 0640 (got %(octmode)s)" msgstr "" #: bin/check_perms:340 msgid "checking permissions on list data" msgstr "" #: bin/check_perms:348 msgid " checking permissions on: %(path)s" msgstr "" #: bin/check_perms:356 msgid "file permissions must be at least 660: %(path)s" msgstr "" #: bin/check_perms:401 msgid "No problems found" msgstr "" #: bin/check_perms:403 msgid "Problems found:" msgstr "" #: bin/check_perms:404 msgid "Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix" msgstr "" #: bin/cleanarch:20 #, docstring msgid "" "Clean up an .mbox archive file.\n" "\n" "The archiver looks for Unix-From lines separating messages in an mbox archive\n" "file. For compatibility, it specifically looks for lines that start with\n" "\"From \" -- i.e. the letters capital-F, lowercase-r, o, m, space, ignoring\n" "everything else on the line.\n" "\n" "Normally, any lines that start \"From \" in the body of a message should be\n" "escaped such that a > character is actually the first on a line. It is\n" "possible though that body lines are not actually escaped. This script\n" "attempts to fix these by doing a stricter test of the Unix-From lines. Any\n" "lines that start \"From \" but do not pass this stricter test are escaped with a\n" "> character.\n" "\n" "Usage: cleanarch [options] < inputfile > outputfile\n" "Options:\n" " -s n\n" " --status=n\n" " Print a # character every n lines processed\n" "\n" " -q / --quiet\n" " Don't print changed line information to standard error.\n" "\n" " -n / --dry-run\n" " Don't actually output anything.\n" "\n" " -h / --help\n" " Print this message and exit\n" msgstr "" #: bin/cleanarch:83 msgid "Unix-From line changed: %(lineno)d" msgstr "" #: bin/cleanarch:111 msgid "Bad status number: %(arg)s" msgstr "" #: bin/cleanarch:167 msgid "%(messages)d messages found" msgstr "" #: bin/clone_member:19 #, docstring msgid "" "Clone a member address.\n" "\n" "Cloning a member address means that a new member will be added who has all the\n" "same options and passwords as the original member address. Note that this\n" "operation is fairly trusting of the user who runs it -- it does no\n" "verification to the new address, it does not send out a welcome message, etc.\n" "\n" "The existing member's subscription is usually not modified in any way. If you\n" "want to remove the old address, use the -r flag. If you also want to change\n" "any list admin addresses, use the -a flag.\n" "\n" "Usage:\n" " clone_member [options] fromoldaddr tonewaddr\n" "\n" "Where:\n" "\n" " --listname=listname\n" " -l listname\n" " Check and modify only the named mailing lists. If -l is not given,\n" " then all mailing lists are scanned from the address. Multiple -l\n" " options can be supplied.\n" "\n" " --remove\n" " -r\n" " Remove the old address from the mailing list after it's been cloned.\n" "\n" " --admin\n" " -a\n" " Scan the list admin addresses for the old address, and clone or change\n" " them too.\n" "\n" " --quiet\n" " -q\n" " Do the modifications quietly.\n" "\n" " --nomodify\n" " -n\n" " Print what would be done, but don't actually do it. Inhibits the\n" " --quiet flag.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " fromoldaddr (`from old address') is the old address of the user. tonewaddr\n" " (`to new address') is the new address of the user.\n" "\n" msgstr "" #: bin/clone_member:94 msgid "processing mailing list:" msgstr "" #: bin/clone_member:101 msgid " scanning list owners:" msgstr "" #: bin/clone_member:119 msgid " new list owners:" msgstr "" #: bin/clone_member:121 msgid "(no change)" msgstr "" #: bin/clone_member:130 msgid " address not found:" msgstr "" #: bin/clone_member:145 msgid " clone address added:" msgstr "" #: bin/clone_member:148 msgid " clone address is already a member:" msgstr "" #: bin/clone_member:151 msgid " original address removed:" msgstr "" #: bin/clone_member:202 msgid "Not a valid email address: %(toaddr)s" msgstr "" #: bin/clone_member:215 msgid "" "Error opening list \"%(listname)s\", skipping.\n" "%(e)s" msgstr "" #: bin/config_list:20 #, docstring msgid "" "Configure a list from a text file description.\n" "\n" "Usage: config_list [options] listname\n" "\n" "Options:\n" " --inputfile filename\n" " -i filename\n" " Configure the list by assigning each module-global variable in the\n" " file to an attribute on the list object, then saving the list. The\n" " named file is loaded with execfile() and must be legal Python code.\n" " Any variable that isn't already an attribute of the list object is\n" " ignored (a warning message is printed). See also the -c option.\n" "\n" " A special variable named `mlist' is put into the globals during the\n" " execfile, which is bound to the actual MailList object. This lets you\n" " do all manner of bizarre thing to the list object, but BEWARE! Using\n" " this can severely (and possibly irreparably) damage your mailing list!\n" "\n" " --outputfile filename\n" " -o filename\n" " Instead of configuring the list, print out a list's configuration\n" " variables in a format suitable for input using this script. In this\n" " way, you can easily capture the configuration settings for a\n" " particular list and imprint those settings on another list. filename\n" " is the file to output the settings to. If filename is `-', standard\n" " out is used.\n" "\n" " --checkonly\n" " -c\n" " With this option, the modified list is not actually changed. Only\n" " useful with -i.\n" "\n" " --verbose\n" " -v\n" " Print the name of each attribute as it is being changed. Only useful\n" " with -i.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" "The options -o and -i are mutually exclusive.\n" "\n" msgstr "" #: bin/config_list:118 msgid "" "# -*- python -*-\n" "# -*- coding: %(charset)s -*-\n" "## \"%(listname)s\" mailing list configuration settings\n" "## captured on %(when)s\n" msgstr "" #: bin/config_list:144 msgid "options" msgstr "" #: bin/config_list:203 msgid "legal values are:" msgstr "" #: bin/config_list:270 msgid "attribute \"%(k)s\" ignored" msgstr "" #: bin/config_list:273 msgid "attribute \"%(k)s\" changed" msgstr "" #: bin/config_list:279 msgid "Non-standard property restored: %(k)s" msgstr "" #: bin/config_list:288 msgid "Invalid value for property: %(k)s" msgstr "" #: bin/config_list:291 msgid "Bad email address for option %(k)s: %(v)s" msgstr "" #: bin/config_list:348 msgid "Only one of -i or -o is allowed" msgstr "" #: bin/config_list:350 msgid "One of -i or -o is required" msgstr "" #: bin/config_list:354 msgid "List name is required" msgstr "" #: bin/convert.py:19 #, docstring msgid "" "Convert a list's interpolation strings from %-strings to $-strings.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r convert \n" msgstr "" #: bin/convert.py:38 bin/fix_url.py:90 msgid "Saving list" msgstr "" #: bin/convert.py:44 bin/fix_url.py:51 bin/reset_pw.py:57 msgid "%%%" msgstr "" #: bin/discard:19 #, docstring msgid "" "Discard held messages.\n" "\n" "Usage:\n" " discard [options] file ...\n" "\n" "Options:\n" " --help / -h\n" " Print this help message and exit.\n" "\n" " --quiet / -q\n" " Don't print status messages.\n" msgstr "" #: bin/discard:94 msgid "Ignoring non-held message: %(f)s" msgstr "" #: bin/discard:100 msgid "Ignoring held msg w/bad id: %(f)s" msgstr "" #: bin/discard:112 msgid "Discarded held msg #%(id)s for list %(listname)s" msgstr "" #: bin/dumpdb:19 #, docstring msgid "" "Dump the contents of any Mailman `database' file.\n" "\n" "Usage: %(PROGRAM)s [options] filename\n" "\n" "Options:\n" "\n" " --marshal/-m\n" " Assume the file contains a Python marshal, overridding any automatic\n" " guessing.\n" "\n" " --pickle/-p\n" " Assume the file contains a Python pickle, overridding any automatic\n" " guessing.\n" "\n" " --noprint/-n\n" " Don't attempt to pretty print the object. This is useful if there's\n" " some problem with the object and you just want to get an unpickled\n" " representation. Useful with `python -i bin/dumpdb '. In that\n" " case, the root of the tree will be left in a global called \"msg\".\n" "\n" " --help/-h\n" " Print this help message and exit\n" "\n" "If the filename ends with `.db', then it is assumed that the file contains a\n" "Python marshal. If the file ends with `.pck' then it is assumed to contain a\n" "Python pickle. In either case, if you want to override the default assumption\n" "-- or if the file ends in neither suffix -- use the -p or -m flags.\n" msgstr "" #: bin/dumpdb:105 msgid "No filename given." msgstr "" #: bin/dumpdb:108 msgid "Bad arguments: %(pargs)s" msgstr "" #: bin/dumpdb:118 msgid "Please specify either -p or -m." msgstr "" #: bin/dumpdb:133 msgid "[----- start %(typename)s file -----]" msgstr "" #: bin/dumpdb:139 msgid "[----- end %(typename)s file -----]" msgstr "" #: bin/dumpdb:142 msgid "<----- start object %(cnt)s ----->" msgstr "" #: bin/export.py:20 #, docstring msgid "Export an XML representation of a mailing list." msgstr "" #: bin/export.py:319 msgid "" "%%prog [options]\n" "\n" "Export the configuration and members of a mailing list in XML format." msgstr "" #: bin/export.py:325 msgid "" "Output XML to FILENAME. If not given, or if FILENAME is '-', standard out is\n" "used." msgstr "" #: bin/export.py:329 msgid "" "Specify the RFC 2307 style hashing scheme for passwords included in the\n" "output. Use -P to get a list of supported schemes, which are\n" "case-insensitive." msgstr "" #: bin/export.py:334 msgid "" "List the supported password hashing schemes and exit. The scheme labels are\n" "case-insensitive." msgstr "" #: bin/export.py:339 msgid "" "The list to include in the output. If not given, then all mailing lists are\n" "included in the XML output. Multiple -l flags may be given." msgstr "" #: bin/export.py:345 msgid "Unexpected arguments" msgstr "" #: bin/export.py:351 msgid "Invalid password scheme" msgstr "" #: bin/find_member:19 #, docstring msgid "" "Find all lists that a member's address is on.\n" "\n" "Usage:\n" " find_member [options] regex [regex [...]]\n" "\n" "Where:\n" " --listname=listname\n" " -l listname\n" " Include only the named list in the search.\n" "\n" " --exclude=listname\n" " -x listname\n" " Exclude the named list from the search.\n" "\n" " --owners\n" " -w\n" " Search list owners as well as members.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " regex\n" " A Python regular expression to match against.\n" "\n" "The interaction between -l and -x is as follows. If any -l option is given\n" "then only the named list will be included in the search. If any -x option is\n" "given but no -l option is given, then all lists will be search except those\n" "specifically excluded.\n" "\n" "Regular expression syntax is Perl5-like, using the Python re module. Complete\n" "specifications are at:\n" "\n" "https://docs.python.org/2/library/re.html\n" "\n" "Address matches are case-insensitive, but case-preserved addresses are\n" "displayed.\n" "\n" msgstr "" #: bin/find_member:159 msgid "Search regular expression required" msgstr "" #: bin/find_member:164 msgid "No lists to search" msgstr "" #: bin/find_member:173 msgid "found in:" msgstr "" #: bin/find_member:179 msgid "(as owner)" msgstr "" #: bin/fix_url.py:19 #, docstring msgid "" "Reset a list's web_page_url attribute to the default setting.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r fix_url listname [options]\n" "\n" "Options:\n" " -u urlhost\n" " --urlhost=urlhost\n" " Look up urlhost in the virtual host table and set the web_page_url and\n" " host_name attributes of the list to the values found. This\n" " essentially moves the list from one virtual domain to another.\n" "\n" " Without this option, the default web_page_url and host_name values are\n" " used.\n" "\n" " -v / --verbose\n" " Print what the script is doing.\n" "\n" "If run standalone, it prints this help text and exits.\n" msgstr "" #: bin/fix_url.py:75 msgid "Locking list" msgstr "" #: bin/fix_url.py:85 msgid "Setting web_page_url to: %(web_page_url)s" msgstr "" #: bin/fix_url.py:88 msgid "Setting host_name to: %(mailhost)s" msgstr "" #: bin/genaliases:19 #, docstring msgid "" "Regenerate Mailman specific aliases from scratch.\n" "\n" "The actual output depends on the value of the `MTA' variable in your mm_cfg.py\n" "file.\n" "\n" "Usage: genaliases [options]\n" "Options:\n" "\n" " -q/--quiet\n" " Some MTA output can include more verbose help text. Use this to tone\n" " down the verbosity.\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: bin/genaliases:84 msgid "genaliases can't do anything useful with mm_cfg.MTA = %(mta)s." msgstr "" #: bin/inject:20 #, docstring msgid "" "Inject a message from a file into Mailman's incoming queue.\n" "\n" "Usage: inject [options] [filename]\n" "\n" "Options:\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" " -l listname\n" " --listname=listname\n" " The name of the list to inject this message to. Required.\n" "\n" " -q queuename\n" " --queue=queuename\n" " The name of the queue to inject the message to. The queuename must be\n" " one of the directories inside the qfiles directory. If omitted, the\n" " incoming queue is used.\n" "\n" "filename is the name of the plaintext message file to inject. If omitted,\n" "standard input is used.\n" msgstr "" #: bin/inject:84 msgid "Bad queue directory: %(qdir)s" msgstr "" #: bin/inject:89 msgid "A list name is required" msgstr "" #: bin/list_admins:20 #, docstring msgid "" "List all the owners of a mailing list.\n" "\n" "Usage: %(program)s [options] listname ...\n" "\n" "Where:\n" "\n" " --all-vhost=vhost\n" " -v=vhost\n" " List the owners of all the mailing lists for the given virtual host.\n" "\n" " --all\n" " -a\n" " List the owners of all the mailing lists on this system.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" "`listname' is the name of the mailing list to print the owners of. You can\n" "have more than one named list on the command line.\n" msgstr "" #: bin/list_admins:97 msgid "List: %(listname)s, \tOwners: %(owners)s" msgstr "" #: bin/list_lists:19 #, docstring msgid "" "List all mailing lists.\n" "\n" "Usage: %(program)s [options]\n" "\n" "Where:\n" "\n" " -a / --advertised\n" " List only those mailing lists that are publically advertised\n" "\n" " -p / --public-archive\n" " List only those lists with public archives.\n" "\n" " --virtual-host-overview=domain\n" " -V domain\n" " List only those mailing lists that are homed to the given virtual\n" " domain. This only works if the VIRTUAL_HOST_OVERVIEW variable is\n" " set.\n" "\n" " -b / --bare\n" " Displays only the list name, with no description.\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" msgstr "" #: bin/list_lists:119 msgid "No matching mailing lists found" msgstr "" #: bin/list_lists:123 msgid "matching mailing lists found:" msgstr "" #: bin/list_members:19 #, docstring msgid "" "List all the members of a mailing list.\n" "\n" "Usage: %(PROGRAM)s [options] listname\n" "\n" "Where:\n" "\n" " --output file\n" " -o file\n" " Write output to specified file instead of standard out.\n" "\n" " --regular / -r\n" " Print just the regular (non-digest) members.\n" "\n" " --digest[=kind] / -d [kind]\n" " Print just the digest members. Optional argument can be \"mime\" or\n" " \"plain\" which prints just the digest members receiving that kind of\n" " digest.\n" "\n" " --nomail[=why] / -n [why]\n" " Print the members that have delivery disabled. Optional argument can\n" " be \"byadmin\", \"byuser\", \"bybounce\", or \"unknown\" which prints just the\n" " users who have delivery disabled for that reason. It can also be\n" " \"enabled\" which prints just those member for whom delivery is\n" " enabled.\n" "\n" " --fullnames / -f\n" " Include the full names in the output.\n" "\n" " --preserve / -p\n" " Output member addresses case preserved the way they were added to the\n" " list. Otherwise, addresses are printed in all lowercase.\n" "\n" " --moderated / -m\n" " Print just the moderated members. Ignores -r, -d, -n.\n" "\n" " --non-moderated / -M\n" " Print just the non-moderated members. Ignores -r, -d, -n.\n" "\n" " --invalid / -i\n" " Print only the addresses in the membership list that are invalid.\n" " Ignores -r, -d, -n.\n" "\n" " --unicode / -u\n" " Print addresses which are stored as Unicode objects instead of normal\n" " string objects. Ignores -r, -d, -n.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname is the name of the mailing list to use.\n" "\n" "Note that if neither -r or -d is supplied, regular members are printed first,\n" "followed by digest members, but no indication is given as to address status.\n" msgstr "" #: bin/list_members:198 msgid "Bad --nomail option: %(why)s" msgstr "" #: bin/list_members:209 msgid "Bad --digest option: %(kind)s" msgstr "" #: bin/list_members:213 bin/list_members:217 bin/list_members:221 #: bin/list_members:225 msgid "Only one of -m, -M, -i or -u may be specified." msgstr "" #: bin/list_members:243 msgid "Could not open file for writing:" msgstr "" #: bin/list_owners:20 #, docstring msgid "" "List the owners of a mailing list, or all mailing lists.\n" "\n" "Usage: %(PROGRAM)s [options] [listname ...]\n" "Options:\n" "\n" " -w / --with-listnames\n" " Group the owners by list names and include the list names in the\n" " output. Otherwise, the owners will be sorted and uniquified based on\n" " the email address.\n" "\n" " -m / --moderators\n" " Include the list moderators in the output.\n" "\n" " -h / --help\n" " Print this help message and exit.\n" "\n" " listname\n" " Print the owners of the specified lists. More than one can appear\n" " after the options. If there are no listnames provided, the owners of\n" " all the lists will be displayed.\n" msgstr "" #: bin/mailman-config:22 #, docstring msgid "" "Show basic statistics about, and build options for this\n" "installation of Mailman. Requires python 2." msgstr "" #: bin/mailmanctl:20 #, docstring msgid "" "Primary start-up and shutdown script for Mailman's qrunner daemon.\n" "\n" "This script starts, stops, and restarts the main Mailman queue runners, making\n" "sure that the various long-running qrunners are still alive and kicking. It\n" "does this by forking and exec'ing the qrunners and waiting on their pids.\n" "When it detects a subprocess has exited, it may restart it.\n" "\n" "The qrunners respond to SIGINT, SIGTERM, and SIGHUP. SIGINT and SIGTERM both\n" "cause the qrunners to exit cleanly, but the master will only restart qrunners\n" "that have exited due to a SIGINT. SIGHUP causes the master and the qrunners\n" "to close their log files, and reopen then upon the next printed message.\n" "\n" "The master also responds to SIGINT, SIGTERM, and SIGHUP, which it simply\n" "passes on to the qrunners (note that the master will close and reopen its own\n" "log files on receipt of a SIGHUP). The master also leaves its own process id\n" "in the file data/master-qrunner.pid but you normally don't need to use this\n" "pid directly. The `start', `stop', `restart', and `reopen' commands handle\n" "everything for you.\n" "\n" "Usage: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n" "\n" "Options:\n" "\n" " -n/--no-restart\n" " Don't restart the qrunners when they exit because of an error or a\n" " SIGINT. They are never restarted if they exit in response to a\n" " SIGTERM. Use this only for debugging. Only useful if the `start'\n" " command is given.\n" "\n" " -u/--run-as-user\n" " Normally, this script will refuse to run if the user id and group id\n" " are not set to the `mailman' user and group (as defined when you\n" " configured Mailman). If run as root, this script will change to this\n" " user and group before the check is made.\n" "\n" " This can be inconvenient for testing and debugging purposes, so the -u\n" " flag means that the step that sets and checks the uid/gid is skipped,\n" " and the program is run as the current user and group. This flag is\n" " not recommended for normal production environments.\n" "\n" " Note though, that if you run with -u and are not in the mailman group,\n" " you may have permission problems, such as begin unable to delete a\n" " list's archives through the web. Tough luck!\n" "\n" " -s/--stale-lock-cleanup\n" " If mailmanctl finds an existing master lock, it will normally exit\n" " with an error message. With this option, mailmanctl will perform an\n" " extra level of checking. If a process matching the host/pid described\n" " in the lock file is running, mailmanctl will still exit, but if no\n" " matching process is found, mailmanctl will remove the apparently stale\n" " lock and make another attempt to claim the master lock.\n" "\n" " -q/--quiet\n" " Don't print status messages. Error messages are still printed to\n" " standard error.\n" "\n" " -h/--help\n" " Print this message and exit.\n" "\n" "Commands:\n" "\n" " start - Start the master daemon and all qrunners. Prints a message and\n" " exits if the master daemon is already running.\n" "\n" " stop - Stops the master daemon and all qrunners. After stopping, no\n" " more messages will be processed.\n" "\n" " restart - Restarts the qrunners, but not the master process. Use this\n" " whenever you upgrade or update Mailman so that the qrunners will\n" " use the newly installed code.\n" "\n" " reopen - This will close all log files, causing them to be re-opened the\n" " next time a message is written to them\n" msgstr "" #: bin/mailmanctl:152 msgid "PID unreadable in: %(pidfile)s" msgstr "" #: bin/mailmanctl:154 msgid "Is qrunner even running?" msgstr "" #: bin/mailmanctl:160 msgid "No child with pid: %(pid)s" msgstr "" #: bin/mailmanctl:162 msgid "Stale pid file removed." msgstr "" #: bin/mailmanctl:221 msgid "" "The master qrunner lock could not be acquired because it appears as if another\n" "master qrunner is already running.\n" msgstr "" #: bin/mailmanctl:227 msgid "" "The master qrunner lock could not be acquired. It appears as though there is\n" "a stale master qrunner lock. Try re-running mailmanctl with the -s flag.\n" msgstr "" #: bin/mailmanctl:233 msgid "" "The master qrunner lock could not be acquired, because it appears as if some\n" "process on some other host may have acquired it. We can't test for stale\n" "locks across host boundaries, so you'll have to do this manually. Or, if you\n" "know the lock is stale, re-run mailmanctl with the -s flag.\n" "\n" "Lock file: %(LOCKFILE)s\n" "Lock host: %(status)s\n" "\n" "Exiting." msgstr "" #: bin/mailmanctl:280 cron/mailpasswds:119 msgid "Site list is missing: %(sitelistname)s" msgstr "" #: bin/mailmanctl:305 msgid "Run this program as root or as the %(name)s user, or use -u." msgstr "" #: bin/mailmanctl:336 msgid "No command given." msgstr "" #: bin/mailmanctl:339 msgid "Bad command: %(command)s" msgstr "" #: bin/mailmanctl:344 msgid "Warning! You may encounter permission problems." msgstr "" #: bin/mailmanctl:353 msgid "Shutting down Mailman's master qrunner" msgstr "" #: bin/mailmanctl:360 msgid "Restarting Mailman's master qrunner" msgstr "" #: bin/mailmanctl:364 msgid "Re-opening all log files" msgstr "" #: bin/mailmanctl:400 msgid "Starting Mailman's master qrunner." msgstr "" #: bin/mmsitepass:19 #, docstring msgid "" "Set the site password, prompting from the terminal.\n" "\n" "The site password can be used in most if not all places that the list\n" "administrator's password can be used, which in turn can be used in most places\n" "that a list users password can be used.\n" "\n" "Usage: %(PROGRAM)s [options] [password]\n" "\n" "Options:\n" "\n" " -c/--listcreator\n" " Set the list creator password instead of the site password. The list\n" " creator is authorized to create and remove lists, but does not have\n" " the total power of the site administrator.\n" "\n" " -h/--help\n" " Print this help message and exit.\n" "\n" "If password is not given on the command line, it will be prompted for.\n" msgstr "" #: bin/mmsitepass:73 msgid "site" msgstr "" #: bin/mmsitepass:80 msgid "list creator" msgstr "" #: bin/mmsitepass:86 msgid "New %(pwdesc)s password: " msgstr "" #: bin/mmsitepass:87 msgid "Again to confirm password: " msgstr "" #: bin/mmsitepass:89 msgid "Passwords do not match; no changes made." msgstr "" #: bin/mmsitepass:92 msgid "Interrupted..." msgstr "" #: bin/mmsitepass:98 msgid "Password changed." msgstr "" #: bin/mmsitepass:100 msgid "Password change failed." msgstr "" #: bin/msgfmt.py:5 #, docstring msgid "" "Generate binary message catalog from textual translation description.\n" "\n" "This program converts a textual Uniforum-style message catalog (.po file) into\n" "a binary GNU catalog (.mo file). This is essentially the same function as the\n" "GNU msgfmt program, however, it is a simpler implementation.\n" "\n" "Usage: msgfmt.py [OPTIONS] filename.po\n" "\n" "Options:\n" " -o file\n" " --output-file=file\n" " Specify the output file to write to. If omitted, output will go to a\n" " file named filename.mo (based off the input file name).\n" "\n" " -h\n" " --help\n" " Print this message and exit.\n" "\n" " -V\n" " --version\n" " Display version information and exit.\n" msgstr "" #: bin/msgfmt.py:49 #, docstring msgid "Add a non-fuzzy translation to the dictionary." msgstr "" #: bin/msgfmt.py:57 #, docstring msgid "Return the generated output." msgstr "" #: bin/newlist:20 #, docstring msgid "" "Create a new, unpopulated mailing list.\n" "\n" "Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n" "\n" "Options:\n" "\n" " -l language\n" " --language=language\n" " Make the list's preferred language `language', which must be a two\n" " letter language code.\n" "\n" " -u urlhost\n" " --urlhost=urlhost\n" " Gives the list's web interface host name.\n" "\n" " -e emailhost\n" " --emailhost=emailhost\n" " Gives the list's email domain name.\n" "\n" " -q/--quiet\n" " Normally the administrator is notified by email (after a prompt) that\n" " their list has been created. This option suppresses the prompt and\n" " notification.\n" "\n" " -a/--automate\n" " This option suppresses the prompt prior to administrator notification\n" " but still sends the notification. It can be used to make newlist\n" " totally non-interactive but still send the notification, assuming\n" " listname, listadmin-addr and admin-password are all specified on the\n" " command line.\n" "\n" " -h/--help\n" " Print this help text and exit.\n" "\n" "You can specify as many of the arguments as you want on the command line:\n" "you will be prompted for the missing ones.\n" "\n" "Every Mailman list has two parameters which define the default host name for\n" "outgoing email, and the default URL for all web interfaces. When you\n" "configured Mailman, certain defaults were calculated, but if you are running\n" "multiple virtual Mailman sites, then the defaults may not be appropriate for\n" "the list you are creating.\n" "\n" "You also specify the domain to create your new list in by typing the command\n" "like so:\n" "\n" " newlist --urlhost=www.mydom.ain mylist\n" "\n" "where `www.mydom.ain' should be the base hostname for the URL to this virtual\n" "hosts's lists. E.g. with this setting people will view the general list\n" "overviews at http://www.mydom.ain/mailman/listinfo. Also, www.mydom.ain\n" "should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if\n" "the email hostname to be automatically determined.\n" "\n" "If you want the email hostname to be different from the one looked up by the\n" "VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can specify\n" "`emailhost' like so:\n" "\n" " newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n" "\n" "where `mydom.ain' is the mail domain name. If you don't specify emailhost but\n" "urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST will\n" "be used for the email interface.\n" "\n" "For backward compatibility, you can also specify the domain to create your\n" "new list in by spelling the listname like so:\n" "\n" " mylist@www.mydom.ain\n" "\n" "where www.mydom.ain is used for `urlhost' but it will also be used for\n" "`emailhost' if it is not found in the virtual host table. Note that\n" "'--urlhost' and '--emailhost' have precedence to this notation.\n" "\n" "If you spell the list name as just `mylist', then the email hostname will be\n" "taken from DEFAULT_EMAIL_HOST and the url will be taken from DEFAULT_URL_HOST\n" "interpolated into DEFAULT_URL_PATTERN (as defined in your Defaults.py file or\n" "overridden by settings in mm_cfg.py).\n" "\n" "Note that listnames are forced to lowercase.\n" msgstr "" #: bin/newlist:162 msgid "Unknown language: %(lang)s" msgstr "" #: bin/newlist:167 msgid "Enter the name of the list: " msgstr "" #: bin/newlist:188 msgid "Enter the email of the person running the list: " msgstr "" #: bin/newlist:193 msgid "Initial %(listname)s password: " msgstr "" #: bin/newlist:197 msgid "The list password cannot be empty" msgstr "" #: bin/newlist:220 msgid " - owner addresses need to be fully-qualified names like \"owner@example.com\", not just \"owner\"." msgstr "" #: bin/newlist:244 msgid "Hit enter to notify %(listname)s owner..." msgstr "" #: bin/qrunner:20 #, docstring msgid "" "Run one or more qrunners, once or repeatedly.\n" "\n" "Each named runner class is run in round-robin fashion. In other words, the\n" "first named runner is run to consume all the files currently in its\n" "directory. When that qrunner is done, the next one is run to consume all the\n" "files in /its/ directory, and so on. The number of total iterations can be\n" "given on the command line.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" "\n" " -r runner[:slice:range]\n" " --runner=runner[:slice:range]\n" " Run the named qrunner, which must be one of the strings returned by\n" " the -l option. Optional slice:range if given, is used to assign\n" " multiple qrunner processes to a queue. range is the total number of\n" " qrunners for this queue while slice is the number of this qrunner from\n" " [0..range).\n" "\n" " If using the slice:range form, you better make sure that each qrunner\n" " for the queue is given the same range value. If slice:runner is not\n" " given, then 1:1 is used.\n" "\n" " Multiple -r options may be given, in which case each qrunner will run\n" " once in round-robin fashion. The special runner `All' is shorthand\n" " for a qrunner for each listed by the -l option.\n" "\n" " --once\n" " -o\n" " Run each named qrunner exactly once through its main loop. Otherwise,\n" " each qrunner runs indefinitely, until the process receives a SIGTERM\n" " or SIGINT.\n" "\n" " -l/--list\n" " Shows the available qrunner names and exit.\n" "\n" " -v/--verbose\n" " Spit out more debugging information to the logs/qrunner log file.\n" "\n" " -s/--subproc\n" " This should only be used when running qrunner as a subprocess of the\n" " mailmanctl startup script. It changes some of the exit-on-error\n" " behavior to work better with that framework.\n" "\n" " -h/--help\n" " Print this message and exit.\n" "\n" "runner is required unless -l or -h is given, and it must be one of the names\n" "displayed by the -l switch.\n" "\n" "Note also that this script should be started up from mailmanctl as a normal\n" "operation. It is only useful for debugging if it is run separately.\n" msgstr "" #: bin/qrunner:179 msgid "%(name)s runs the %(runnername)s qrunner" msgstr "" #: bin/qrunner:180 msgid "All runs all the above qrunners" msgstr "" #: bin/qrunner:216 msgid "No runner name given." msgstr "" #: bin/rb-archfix:21 #, docstring msgid "" "Reduce disk space usage for Pipermail archives.\n" "\n" "Usage: %(PROGRAM)s [options] file ...\n" "\n" "Where options are:\n" " -h / --help\n" " Print this help message and exit.\n" "\n" "Only use this to 'fix' archive -article database files that have been written\n" "with Mailman 2.1.3 or earlier and have html_body attributes in them. These\n" "attributes can cause huge amounts of memory bloat and impact performance for\n" "high activity lists, particularly those where large text postings are made to\n" "them.\n" "\n" "Example:\n" "\n" "%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n" "\n" "You should run `bin/check_perms -f' after running this script.\n" "\n" "You will probably want to delete the -article.bak files created by this script\n" "when you are satisfied with the results.\n" "\n" "This script is provided for convenience purposes only. It isn't supported.\n" msgstr "" #: bin/remove_members:20 #, docstring msgid "" "Remove members from a list.\n" "\n" "Usage:\n" " remove_members [options] [listname] [addr1 ...]\n" "\n" "Options:\n" "\n" " --file=file\n" " -f file\n" " Remove member addresses found in the given file. If file is\n" " `-', read stdin.\n" "\n" " --all\n" " -a\n" " Remove all members of the mailing list.\n" " (mutually exclusive with --fromall)\n" "\n" " --fromall\n" " Removes the given addresses from all the lists on this system\n" " regardless of virtual domains if you have any. This option cannot be\n" " used -a/--all. Also, you should not specify a listname when using\n" " this option.\n" "\n" " --nouserack\n" " -n\n" " Don't send the user acknowledgements. If not specified, the list\n" " default value is used.\n" "\n" " --noadminack\n" " -N\n" " Don't send the admin acknowledgements. If not specified, the list\n" " default value is used.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" " listname is the name of the mailing list to use.\n" "\n" " addr1 ... are additional addresses to remove.\n" msgstr "" #: bin/remove_members:156 msgid "Could not open file for reading: %(filename)s." msgstr "" #: bin/remove_members:163 msgid "Error opening list %(listname)s... skipping." msgstr "" #: bin/remove_members:173 msgid "No such member: %(addr)s" msgstr "" #: bin/remove_members:178 msgid "User `%(addr)s' removed from list: %(listname)s." msgstr "" #: bin/reset_pw.py:21 #, docstring msgid "" "Reset the passwords for members of a mailing list.\n" "\n" "This script resets all the passwords of a mailing list's members. It can also\n" "be used to reset the lists of all members of all mailing lists, but it is your\n" "responsibility to let the users know that their passwords have been changed.\n" "\n" "This script is intended to be run as a bin/withlist script, i.e.\n" "\n" "% bin/withlist -l -r reset_pw listname [options]\n" "\n" "Options:\n" " -v / --verbose\n" " Print what the script is doing.\n" msgstr "" #: bin/reset_pw.py:77 msgid "Changing passwords for list: %(listname)s" msgstr "" #: bin/reset_pw.py:83 msgid "New password for member %(member)40s: %(randompw)s" msgstr "" #: bin/rmlist:19 #, docstring msgid "" "Remove the components of a mailing list with impunity - beware!\n" "\n" "This removes (almost) all traces of a mailing list. By default, the lists\n" "archives are not removed, which is very handy for retiring old lists.\n" "\n" "Usage:\n" " rmlist [-a] [-h] listname\n" "\n" "Where:\n" " --archives\n" " -a\n" " Remove the list's archives too, or if the list has already been\n" " deleted, remove any residual archives.\n" "\n" " --help\n" " -h\n" " Print this help message and exit.\n" "\n" msgstr "" #: bin/rmlist:73 bin/rmlist:76 msgid "Removing %(msg)s" msgstr "" #: bin/rmlist:81 msgid "%(listname)s %(msg)s not found as %(filename)s" msgstr "" #: bin/rmlist:105 msgid "No such list (or list already deleted): %(listname)s" msgstr "" #: bin/rmlist:108 msgid "No such list: %(listname)s. Removing its residual archives." msgstr "" #: bin/rmlist:112 msgid "Not removing archives. Reinvoke with -a to remove them." msgstr "" #: bin/rmlist:126 msgid "list info" msgstr "" #: bin/rmlist:134 msgid "stale lock file" msgstr "" #: bin/rmlist:142 msgid "held message file" msgstr "" #: bin/rmlist:147 bin/rmlist:149 msgid "private archives" msgstr "" #: bin/rmlist:151 bin/rmlist:153 msgid "public archives" msgstr "" #: bin/show_qfiles:20 #, docstring msgid "" "Show the contents of one or more Mailman queue files.\n" "\n" "Usage: show_qfiles [options] qfile ...\n" "\n" "Options:\n" "\n" " -q / --quiet\n" " Don't print `helpful' message delimiters.\n" "\n" " -h / --help\n" " Print this text and exit.\n" "\n" "Example: show_qfiles qfiles/shunt/*.pck\n" msgstr "" #: bin/sync_members:19 #, docstring msgid "" "Synchronize a mailing list's membership with a flat file.\n" "\n" "This script is useful if you have a Mailman mailing list and a sendmail\n" ":include: style list of addresses (also as is used in Majordomo). For every\n" "address in the file that does not appear in the mailing list, the address is\n" "added. For every address in the mailing list that does not appear in the\n" "file, the address is removed. Other options control what happens when an\n" "address is added or removed.\n" "\n" "Usage: %(PROGRAM)s [options] -f file listname\n" "\n" "Where `options' are:\n" "\n" " --no-change\n" " -n\n" " Don't actually make the changes. Instead, print out what would be\n" " done to the list.\n" "\n" " --welcome-msg[=]\n" " -w[=]\n" " Sets whether or not to send the newly added members a welcome\n" " message, overriding whatever the list's `send_welcome_msg' setting\n" " is. With -w=yes or -w, the welcome message is sent. With -w=no, no\n" " message is sent.\n" "\n" " --goodbye-msg[=]\n" " -g[=]\n" " Sets whether or not to send the goodbye message to removed members,\n" " overriding whatever the list's `send_goodbye_msg' setting is. With\n" " -g=yes or -g, the goodbye message is sent. With -g=no, no message is\n" " sent.\n" "\n" " --digest[=]\n" " -d[=]\n" " Selects whether to make newly added members receive messages in\n" " digests. With -d=yes or -d, they become digest members. With -d=no\n" " (or if no -d option given) they are added as regular members.\n" "\n" " --notifyadmin[=]\n" " -a[=]\n" " Specifies whether the admin should be notified for each subscription\n" " or unsubscription. If you're adding a lot of addresses, you\n" " definitely want to turn this off! With -a=yes or -a, the admin is\n" " notified. With -a=no, the admin is not notified. With no -a option,\n" " the default for the list is used.\n" "\n" " --file \n" " -f \n" " This option is required. It specifies the flat file to synchronize\n" " against. Email addresses must appear one per line. If filename is\n" " `-' then stdin is used.\n" "\n" " --help\n" " -h\n" " Print this message.\n" "\n" " listname\n" " Required. This specifies the list to synchronize.\n" msgstr "" #: bin/sync_members:115 msgid "Bad choice: %(yesno)s" msgstr "" #: bin/sync_members:138 msgid "Dry run mode" msgstr "" #: bin/sync_members:159 msgid "Only one -f switch allowed" msgstr "" #: bin/sync_members:163 msgid "No argument to -f given" msgstr "" #: bin/sync_members:172 msgid "Illegal option: %(opt)s" msgstr "" #: bin/sync_members:178 msgid "No listname given" msgstr "" #: bin/sync_members:182 msgid "Must have a listname and a filename" msgstr "" #: bin/sync_members:191 msgid "Cannot read address file: %(filename)s: %(msg)s" msgstr "" #: bin/sync_members:203 msgid "Ignore : %(addr)30s" msgstr "" #: bin/sync_members:212 msgid "Invalid : %(addr)30s" msgstr "" #: bin/sync_members:215 msgid "You must fix the preceding invalid addresses first." msgstr "" #: bin/sync_members:264 msgid "Added : %(s)s" msgstr "" #: bin/sync_members:289 msgid "Removed: %(s)s" msgstr "" #: bin/transcheck:19 #, docstring msgid "" "\n" "Check a given Mailman translation, making sure that variables and\n" "tags referenced in translation are the same variables and tags in\n" "the original templates and catalog.\n" "\n" "Usage:\n" "\n" "cd $MAILMAN_DIR\n" "%(program)s [-q] \n" "\n" "Where is your country code (e.g. 'it' for Italy) and -q is\n" "to ask for a brief summary.\n" msgstr "" #: bin/transcheck:58 #, docstring msgid "check a translation comparing with the original string" msgstr "" #: bin/transcheck:68 #, docstring msgid "scan a string from the original file" msgstr "" #: bin/transcheck:78 #, docstring msgid "scan a translated string" msgstr "" #: bin/transcheck:91 #, docstring msgid "check for differences between checked in and checked out" msgstr "" #: bin/transcheck:124 #, docstring msgid "parse a .po file extracting msgids and msgstrs" msgstr "" #: bin/transcheck:143 #, docstring msgid "" "States table for the finite-states-machine parser:\n" " 0 idle\n" " 1 filename-or-comment\n" " 2 msgid\n" " 3 msgstr\n" " 4 end\n" " " msgstr "" #: bin/transcheck:280 #, docstring msgid "" "check a translated template against the original one\n" " search also tags if html is not zero" msgstr "" #: bin/transcheck:327 #, docstring msgid "scan the po file comparing msgids with msgstrs" msgstr "" #: bin/unshunt:20 #, docstring msgid "" "Move a message from the shunt queue to the original queue.\n" "\n" "Usage: %(PROGRAM)s [options] [directory]\n" "\n" "Where:\n" "\n" " -h / --help\n" " Print help and exit.\n" "\n" "Optional `directory' specifies a directory to dequeue from other than\n" "qfiles/shunt. *** Warning *** Do not unshunt messages that weren't\n" "shunted to begin with. For example, running unshunt on qfiles/out/\n" "will result in losing all the messages in that queue.\n" msgstr "" #: bin/unshunt:85 msgid "" "Cannot unshunt message %(filebase)s, skipping:\n" "%(e)s" msgstr "" #: bin/update:20 #, docstring msgid "" "Perform all necessary upgrades.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -f/--force\n" " Force running the upgrade procedures. Normally, if the version number\n" " of the installed Mailman matches the current version number (or a\n" " `downgrade' is detected), nothing will be done.\n" "\n" " -h/--help\n" " Print this text and exit.\n" "\n" "Use this script to help you update to the latest release of Mailman from\n" "some previous version. It knows about versions back to 1.0b4 (?).\n" msgstr "" #: bin/update:107 msgid "Fixing language templates: %(listname)s" msgstr "" #: bin/update:196 bin/update:711 msgid "WARNING: could not acquire lock for list: %(listname)s" msgstr "" #: bin/update:215 msgid "Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info" msgstr "" #: bin/update:221 msgid "Updating the held requests database." msgstr "" #: bin/update:243 msgid "" "For some reason, %(mbox_dir)s exists as a file. This won't work with\n" "b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding." msgstr "" #: bin/update:255 msgid "" "\n" "%(listname)s has both public and private mbox archives. Since this list\n" "currently uses private archiving, I'm installing the private mbox archive\n" "-- %(o_pri_mbox_file)s -- as the active archive, and renaming\n" " %(o_pub_mbox_file)s\n" "to\n" " %(o_pub_mbox_file)s.preb6\n" "\n" "You can integrate that into the archives if you want by using the 'arch'\n" "script.\n" msgstr "" #: bin/update:270 msgid "" "%s has both public and private mbox archives. Since this list\n" "currently uses public archiving, I'm installing the public mbox file\n" "archive file (%s) as the active one, and renaming\n" " %s\n" " to\n" " %s.preb6\n" "\n" "You can integrate that into the archives if you want by using the 'arch'\n" "script.\n" msgstr "" #: bin/update:287 msgid "- updating old private mbox file" msgstr "" #: bin/update:295 msgid "" " unknown file in the way, moving\n" " %(o_pri_mbox_file)s\n" " to\n" " %(newname)s" msgstr "" #: bin/update:309 msgid "- updating old public mbox file" msgstr "" #: bin/update:317 msgid "" " unknown file in the way, moving\n" " %(o_pub_mbox_file)s\n" " to\n" " %(newname)s" msgstr "" #: bin/update:353 msgid "- This list looks like it might have <= b4 list templates around" msgstr "" #: bin/update:361 msgid "- moved %(o_tmpl)s to %(n_tmpl)s" msgstr "" #: bin/update:363 msgid "- both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched" msgstr "" #: bin/update:366 msgid "- %(o_tmpl)s doesn't exist, leaving untouched" msgstr "" #: bin/update:396 msgid "removing directory %(src)s and everything underneath" msgstr "" #: bin/update:399 msgid "removing %(src)s" msgstr "" #: bin/update:403 msgid "Warning: couldn't remove %(src)s -- %(rest)s" msgstr "" #: bin/update:408 msgid "couldn't remove old file %(pyc)s -- %(rest)s" msgstr "" #: bin/update:412 msgid "updating old qfiles" msgstr "" #: bin/update:455 msgid "Warning! Not a directory: %(dirpath)s" msgstr "" #: bin/update:530 msgid "message is unparsable: %(filebase)s" msgstr "" #: bin/update:544 msgid "Warning! Deleting empty .pck file: %(pckfile)s" msgstr "" #: bin/update:563 msgid "Updating Mailman 2.0 pending_subscriptions.db database" msgstr "" #: bin/update:574 msgid "Updating Mailman 2.1.4 pending.pck database" msgstr "" #: bin/update:598 msgid "Ignoring bad pended data: %(key)s: %(val)s" msgstr "" #: bin/update:614 msgid "WARNING: Ignoring duplicate pending ID: %(id)s." msgstr "" #: bin/update:667 msgid "getting rid of old source files" msgstr "" #: bin/update:677 msgid "no lists == nothing to do, exiting" msgstr "" #: bin/update:684 msgid "" "fixing all the perms on your old html archives to work with b6\n" "If your archives are big, this could take a minute or two..." msgstr "" #: bin/update:689 msgid "done" msgstr "" #: bin/update:691 msgid "Updating mailing list: %(listname)s" msgstr "" #: bin/update:694 msgid "Updating Usenet watermarks" msgstr "" #: bin/update:699 msgid "- nothing to update here" msgstr "" #: bin/update:722 msgid "- usenet watermarks updated and gate_watermarks removed" msgstr "" #: bin/update:736 msgid "" "\n" "\n" "NOTE NOTE NOTE NOTE NOTE\n" "\n" " You are upgrading an existing Mailman installation, but I can't tell what\n" " version you were previously running.\n" "\n" " If you are upgrading from Mailman 1.0b9 or earlier you will need to\n" " manually update your mailing lists. For each mailing list you need to\n" " copy the file templates/options.html lists//options.html.\n" "\n" " However, if you have edited this file via the Web interface, you will have\n" " to merge your changes into this file, otherwise you will lose your\n" " changes.\n" "\n" "NOTE NOTE NOTE NOTE NOTE\n" "\n" msgstr "" #: bin/update:793 msgid "No updates are necessary." msgstr "" #: bin/update:796 msgid "" "Downgrade detected, from version %(hexlversion)s to version %(hextversion)s\n" "This is probably not safe.\n" "Exiting." msgstr "" #: bin/update:801 msgid "Upgrading from version %(hexlversion)s to %(hextversion)s" msgstr "" #: bin/update:810 msgid "" "\n" "ERROR:\n" "\n" "The locks for some lists could not be acquired. This means that either\n" "Mailman was still active when you upgraded, or there were stale locks in the\n" "%(lockdir)s directory.\n" "\n" "You must put Mailman into a quiescent state and remove all stale locks, then\n" "re-run \"make update\" manually. See the INSTALL and UPGRADE files for details.\n" msgstr "" #: bin/version:19 #, docstring msgid "" "Print the Mailman version.\n" msgstr "" #: bin/version:26 msgid "Using Mailman version:" msgstr "" #: bin/withlist:20 #, docstring msgid "" "General framework for interacting with a mailing list object.\n" "\n" "There are two ways to use this script: interactively or programmatically.\n" "Using it interactively allows you to play with, examine and modify a MailList\n" "object from Python's interactive interpreter. When running interactively, a\n" "MailList object called `m' will be available in the global namespace. It also\n" "loads the class MailList into the global namespace.\n" "\n" "Programmatically, you can write a function to operate on a MailList object,\n" "and this script will take care of the housekeeping (see below for examples).\n" "In that case, the general usage syntax is:\n" "\n" "%% bin/withlist [options] listname [args ...]\n" "\n" "Options:\n" "\n" " -l / --lock\n" " Lock the list when opening. Normally the list is opened unlocked\n" " (e.g. for read-only operations). You can always lock the file after\n" " the fact by typing `m.Lock()'\n" "\n" " Note that if you use this option, you should explicitly call m.Save()\n" " before exiting, since the interpreter's clean up procedure will not\n" " automatically save changes to the MailList object (but it will unlock\n" " the list).\n" "\n" " -i / --interactive\n" " Leaves you at an interactive prompt after all other processing is\n" " complete. This is the default unless the -r option is given.\n" "\n" " --run [module.]callable\n" " -r [module.]callable\n" " This can be used to run a script with the opened MailList object.\n" " This works by attempting to import `module' (which must be in the\n" " directory containing withlist, or already be accessible on your\n" " sys.path), and then calling `callable' from the module. callable can\n" " be a class or function; it is called with the MailList object as the\n" " first argument. If additional args are given on the command line,\n" " they are passed as subsequent positional args to the callable.\n" "\n" " Note that `module.' is optional; if it is omitted then a module with\n" " the name `callable' will be imported.\n" "\n" " The global variable `r' will be set to the results of this call.\n" "\n" " --all / -a\n" " This option only works with the -r option. Use this if you want to\n" " execute the script on all mailing lists. When you use -a you should\n" " not include a listname argument on the command line. The variable `r'\n" " will be a list of all the results.\n" "\n" " --quiet / -q\n" " Suppress all status messages.\n" "\n" " --help / -h\n" " Print this message and exit\n" "\n" "\n" "Here's an example of how to use the -r option. Say you have a file in the\n" "Mailman installation directory called `listaddr.py', with the following\n" "two functions:\n" "\n" "def listaddr(mlist):\n" " print mlist.GetListEmail()\n" "\n" "def requestaddr(mlist):\n" " print mlist.GetRequestEmail()\n" "\n" "Now, from the command line you can print the list's posting address by running\n" "the following from the command line:\n" "\n" "%% bin/withlist -r listaddr mylist\n" "Loading list: mylist (unlocked)\n" "Importing listaddr ...\n" "Running listaddr.listaddr() ...\n" "mylist@myhost.com\n" "\n" "And you can print the list's request address by running:\n" "\n" "%% bin/withlist -r listaddr.requestaddr mylist\n" "Loading list: mylist (unlocked)\n" "Importing listaddr ...\n" "Running listaddr.requestaddr() ...\n" "mylist-request@myhost.com\n" "\n" "As another example, say you wanted to change the password for a particular\n" "user on a particular list. You could put the following function in a file\n" "called `changepw.py':\n" "\n" "from Mailman.Errors import NotAMemberError\n" "\n" "def changepw(mlist, addr, newpasswd):\n" " try:\n" " mlist.setMemberPassword(addr, newpasswd)\n" " mlist.Save()\n" " except NotAMemberError:\n" " print 'No address matched:', addr\n" "\n" "and run this from the command line:\n" " %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n" msgstr "" #: bin/withlist:164 #, docstring msgid "" "Unlock a locked list, but do not implicitly Save() it.\n" "\n" " This does not get run if the interpreter exits because of a signal, or if\n" " os._exit() is called. It will get called if an exception occurs though.\n" " " msgstr "" #: bin/withlist:175 msgid "Unlocking (but not saving) list: %(listname)s" msgstr "" #: bin/withlist:179 msgid "Finalizing" msgstr "" #: bin/withlist:188 msgid "Loading list %(listname)s" msgstr "" #: bin/withlist:190 msgid "(locked)" msgstr "" #: bin/withlist:192 msgid "(unlocked)" msgstr "" #: bin/withlist:197 msgid "Unknown list: %(listname)s" msgstr "" #: bin/withlist:237 msgid "No list name supplied." msgstr "" #: bin/withlist:246 msgid "--all requires --run" msgstr "" #: bin/withlist:266 msgid "Importing %(module)s..." msgstr "" #: bin/withlist:270 msgid "Running %(module)s.%(callable)s()..." msgstr "" #: bin/withlist:291 msgid "The variable `m' is the %(listname)s MailList instance" msgstr "" #: cron/bumpdigests:19 #, docstring msgid "" "Increment the digest volume number and reset the digest number to one.\n" "\n" "Usage: %(PROGRAM)s [options] [listname ...]\n" "\n" "Options:\n" "\n" " --help/-h\n" " Print this message and exit.\n" "\n" "The lists named on the command line are bumped. If no list names are given,\n" "all lists are bumped.\n" msgstr "" #: cron/checkdbs:20 #, docstring msgid "" "Check for pending admin requests and mail the list owners if necessary.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: cron/checkdbs:108 msgid "" "Notice: %(discarded)d old request(s) automatically expired.\n" "\n" msgstr "" #: cron/checkdbs:121 msgid "%(count)d %(realname)s moderator request(s) waiting" msgstr "" #: cron/checkdbs:124 msgid "%(realname)s moderator request check result" msgstr "" #: cron/checkdbs:144 msgid "Pending subscriptions:" msgstr "" #: cron/checkdbs:155 msgid "Pending unsubscriptions:" msgstr "" #: cron/checkdbs:162 msgid "" "\n" "Pending posts:" msgstr "" #: cron/checkdbs:169 msgid "" "From: %(sender)s on %(date)s\n" "Subject: %(subject)s\n" "Cause: %(reason)s" msgstr "" #: cron/cull_bad_shunt:20 #, docstring msgid "" "Cull bad and shunt queues, recommended once per day.\n" "\n" "This script goes through the 'bad' and 'shunt' queue directories and,\n" "if mm_cfg.BAD_SHUNT_STALE_AFTER is > 0, it removes all files more than\n" "that many seconds old.\n" "\n" "If mm_cfg.BAD_SHUNT_ARCHIVE_DIRECTORY is a writable directory, the old\n" "files are moved there. Otherwise they are deleted.\n" "\n" "Only regular files immediately subordinate to the 'bad' and 'shunt'\n" "directories are processed. Anything else is skipped.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" msgstr "" #: cron/disabled:20 #, docstring msgid "" "Process disabled members, recommended once per day.\n" "\n" "This script cruises through every mailing list looking for members whose\n" "delivery is disabled. If they have been disabled due to bounces, they will\n" "receive another notification, or they may be removed if they've received the\n" "maximum number of notifications.\n" "\n" "Use the --byadmin, --byuser, and --unknown flags to also send notifications to\n" "members whose accounts have been disabled for those reasons. Use --all to\n" "send the notification to all disabled members.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" "\n" " -o / --byadmin\n" " Also send notifications to any member disabled by the list\n" " owner/administrator.\n" "\n" " -m / --byuser\n" " Also send notifications to any member disabled by themselves.\n" "\n" " -u / --unknown\n" " Also send notifications to any member disabled for unknown reasons\n" " (usually a legacy disabled address).\n" "\n" " -b / --notbybounce\n" " Don't send notifications to members disabled because of bounces (the\n" " default is to notify bounce disabled members).\n" "\n" " -a / --all\n" " Send notifications to all disabled members.\n" "\n" " -f / --force\n" " Send notifications to disabled members even if they're not due a new\n" " notification yet.\n" "\n" " -l listname\n" " --listname=listname\n" " Process only the given list, otherwise do all lists.\n" msgstr "" #: cron/disabled:145 msgid "[disabled by periodic sweep and cull, no message available]" msgstr "" #: cron/gate_news:19 #, docstring msgid "" "Poll the NNTP servers for messages to be gatewayed to mailing lists.\n" "\n" "Usage: gate_news [options]\n" "\n" "Where options are\n" "\n" " --help\n" " -h\n" " Print this text and exit.\n" "\n" msgstr "" #: cron/mailpasswds:19 #, docstring msgid "" "Send password reminders for all lists to all users.\n" "\n" "This program scans all mailing lists and collects users and their passwords,\n" "grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true. Then\n" "one email message is sent to each unique user (per-virtual host) containing\n" "the list passwords and options url for the user. The password reminder comes\n" "from the mm_cfg.MAILMAN_SITE_LIST, which must exist.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -l listname\n" " --listname=listname\n" " Send password reminders for the named list only. If omitted,\n" " reminders are sent for all lists. Multiple -l/--listname options are\n" " allowed.\n" "\n" " -h/--help\n" " Print this message and exit.\n" msgstr "" #: cron/mailpasswds:216 msgid "Password // URL" msgstr "" #: cron/mailpasswds:222 msgid "%(host)s mailing list memberships reminder" msgstr "" #: cron/nightly_gzip:19 #, docstring msgid "" "Re-generate the Pipermail gzip'd archive flat files.\n" "\n" "This script should be run nightly from cron. When run from the command line,\n" "the following usage is understood:\n" "\n" "Usage: %(program)s [-v] [-h] [listnames]\n" "\n" "Where:\n" " --verbose\n" " -v\n" " print each file as it's being gzip'd\n" "\n" " --help\n" " -h\n" " print this message and exit\n" "\n" " listnames\n" " Optionally, only compress the .txt files for the named lists. Without \n" " this, all archivable lists are processed.\n" "\n" msgstr "" #: cron/senddigests:20 #, docstring msgid "" "Dispatch digests for lists w/pending messages and digest_send_periodic set.\n" "\n" "Usage: %(PROGRAM)s [options]\n" "\n" "Options:\n" " -h / --help\n" " Print this message and exit.\n" "\n" " -l listname\n" " --listname=listname\n" " Send the digest for the given list only, otherwise the digests for all\n" " lists are sent out. May be repeated to do multiple lists.\n" "\n" " -e listname\n" " --exceptlist listname\n" " Don't send the digest for the given list. May be repeated to skip\n" " multiple lists.\n" msgstr ""