#!/bin/sh ############################################################################### # mmdsr -- Mailman Daily Status Report (cron job, run at 23:59) ############################################################################### # Copyright (c) 2005-2008 Brad Knowles # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer # in the documentation and/or other materials provided with the # distribution. # # The name of the author or other contributors may not be used # to endorse or promote products derived from this software without # specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER # CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. ############################################################################### ############################################################################### # Version history ############################################################################### # 0.0.1 Initial creation by Brad Knowles # Created on: Tue Feb 15 04:01:20 PST 2005 # # 0.0.2 Update by Brad Knowles # Updated on: Wed Feb 16 18:55:52 CET 2005 # Feedback from Tom G. Christensen (tgc99): # > The current UID grab command doesn't work on Solaris # > (2.6 & 8 tested). # > # > I'd recommend this instead: # > ps -o user -p $$|tail -1 # > # > This is tested and works on RH 6.2, RH 7.3, RHEL 2.1, # > RHEL3, FC3, FreeBSD 4.9, Solaris 2.6, 8. # # 0.0.3 Update by Brad Knowles # Updated on: Sun Mar 13 01:15:24 CET 2005 # Noted errors from grep when trying to search a nonexistant # file. Added "-s" option to compensate, and extra code to # notify the admin if the log file doesn't exist. # # 0.0.4 Update by Brad Knowles # Updated on: Sun Mar 13 01:58:37 CET 2005 # Eliminate some extra cruft from the "fromusenet" logs. # # 0.0.5 Update by Brad Knowles # Updated on: Wed Apr 13 00:54:42 CEST 2005 # Eliminate a lot of extra cruft from the "error" & "vette" logs. # Eliminate more cruft from the "fromusenet" logs. # # 0.0.6 Update by Brad Knowles # Updated on: Thu Apr 14 03:07:08 CEST 2005 # Eliminate even more cruft from the "fromusenet" logs. # Eliminate more cruft from the "vette" logs. # Eliminate cruft from the "mischief" logs. # # 0.0.7 Update by Brad Knowles # Updated on: Sun May 1 22:29:13 CEST 2005 [guess] # The "error" log "no such list" errors didn't need to be # quite so "compressed", open them up to be more readable. # Also eliminate all use of "xargs", use "fmt -w 75" instead. # # 0.0.8 Update by Brad Knowles # Updated on: Sun May 1 23:09:13 CEST 2005 # Clean up code for queue subdirectories to check. # # 0.0.9 Update by Brad Knowles # Updated on: Wed May 11 01:23:40 CEST 2005 # Eliminate date/time stamps from the rest of the logs, # then pipe through `sort | uniq -c | sort -nr` # so that all possible duplicates are eliminated. # # 0.0.10 Update by Brad Knowles # Updated on: Tue Jul 12 16:53:49 CDT 2005 # Add code to do summary of normal list activity # # 0.0.11 Update by Brad Knowles # Updated on: Tue Sep 6 15:44:19 CEST 2005 # Tweaked display of Mailman/qfiles subdirectories # so as to avoid displaying more than $MAX_LINES # output, which really helps if you have thousands # of bounces sitting around, etc.... # Also slightly tweaked display of fromusenet logs # to split summary from errors. # # 0.0.12 Update by Brad Knowles # Updated on: Thu Sep 22 22:37:35 CEST 2005 # Bugs found by Mark Sapiro and Adrian Wells. # Mark suggested splitting the Mailman log directory # from the rest of the Mailman source and queues, # as well as making sure to clean up all temp files. # Adrian discovered that there was a log file format # change between Mailman 2.1.5 and 2.1.6, which broke # hourly statistics. # # 0.0.13 Update by Brad Knowles # Updated on: Mon Dec 26 05:54:27 CET 2005 # Bugs found by Tom G. Christensen (tgc99): # > ps output on solaris is full of whitespace but a further # > echo get's rid of it. # > The lines in the smtp log are sometimes broken up by a # > newline (right before the msgid) which throws of the # > summary. Piping it through sed first will rejoin the broken # > lines. # > Use $AWK instead of awk. # Enhancements from Mark Sapiro: # > The vette log summary lists posts held for moderation # > individually under "Other Errors:". The following patch # > (watch out for wrapped lines) summarizes them by list instead. # # 0.0.14 Update by Brad Knowles # Updated on: Thu Dec 29 08:17:38 CET 2005 # Added code to check /usr/local/mailman/data for # moderation hold queue # # 0.0.15 Update by Brad Knowles # Updated on: Thu Jan 26 02:39:38 CET 2006 # Tweaked display of summary data in the "smtp-failure" log, # and "other" category in the "vette" log, so as to reduce # the spewage when things go wonky, mostly by removing # unique-ifying data like message-id or sender address. # Also tweaked moderation queue information, to tell us # how many Python pickle files are in the data directory, # as opposed to just doing a directory listing and skipping # the files in the middle if there are too many -- now we # know how many are being skipped. # # 0.0.16 Update by Brad Knowles # Updated on: Sun Jan 29 11:45:58 CET 2006 # Mark found a couple of typos that I somehow let slip # through. Thanks! # # 0.0.17 Update by Mark Sapiro # Updated on: Thu Jan 3 18:25:06 PST 2008 # Enabled processing the prior generation of a rotated log. # Added SORT_FIELD to the user modifiable parameters. # # 0.0.18 Update by Mark Sapiro # Updated on: Tue May 13 08:58:26 PDT 2008 # Changes for Mailman 2.1.10 -- # Added 'bad' to the list of queues. # Made listing of a queue directory conditional on existence. # Sumarized unparseable messages and preserved queue entries # in the Other Errors section. # # 0.0.19 Update by Mark Sapiro # Updated on: Sun Nov 30 10:26:15 PST 2008 # Changed processing of fromusenet posts. Previously, mmdsr # reported as gated only the first and last of a gated range. # Now mmdsr reports every post from the 'posted to' entries. # # 0.0.20 Update by Mark Sapiro # Updated on: Sun Jul 26 08:56:41 PDT 2009 # Added report of files in the preserved messages directory. # # 0.0.21 Update by Mark Sapiro # Updated on: Sun Sep 27 12:45:44 PDT 2009 # Refactored to use mktemp to create temp files # # 0.0.22 Update by Mark Sapiro # Updated on: Fri Mar 21 19:47:19 PDT 2014 # Updated the "No such list" error report to include the newly # added name of the CGI module. # # 0.0.23 Update by Mark Sapiro # Updated on: Sat Jul 25 07:52:55 PDT 2015 # Updated "Login failure with private rosters" report to # account for newly added IP in log message. # # 0.0.24 Update by Mark Sapiro # Updated on: Thu Oct 1 15:15:39 PDT 2015 # Report vette log held and banned subscriptions as their # own categories instead of in other errors. # Replaced s/\+\d+@/+@/ in vette log # banned subscription messages due to flood of such. # # 0.0.25 Update by Mark Sapiro # Updated on: Sun Jan 31 07:13:47 PST 2016 # Report vette log DMARC lookups as their own # category instead of in other errors. # # 0.0.26 Update by Mark Sapiro # Updated on: Sat Feb 20 21:17:14 PST 2016 # Properly display No such list names that contain ". # # 0.0.27 Update by Mark Sapiro # Updated on: Sun Jun 4 17:12:54 PDT 2017 # Added -a to default (e)grep to account for logs that may # have non-ascii and be seen as binary. # # 0.0.28 Update by Mark Sapiro # Updated on: Fri Jun 15 20:20:36 PDT 2018 # Added report of new security log. # Augmented 0.0.24 to do as well as . ############################################################################### # Set up locations of standard commands, directories, etc.... # You may need to modify these for your platform or installation. ############################################################################### AWK="/usr/bin/awk" BASENAME="/usr/bin/basename" CAT="/bin/cat" DATE="/bin/date" EGREP="/bin/egrep -a" FMT="/usr/bin/fmt" GREP="/bin/grep -a" HEAD="/usr/bin/head" LS="/bin/ls" MKTEMP="/bin/mktemp" PS="/bin/ps" RM="/bin/rm" SED="/bin/sed" SENDMAIL="/usr/sbin/sendmail" SLEEP="/bin/sleep" SORT="/usr/bin/sort" TAIL="/usr/bin/tail" TR="/usr/bin/tr" UNIQ="/usr/bin/uniq" XARGS="/usr/bin/xargs" WC="/usr/bin/wc" ############################################################################### # Arguments for your mktemp command to specify directory and/or create file. # For example, HPUX mktemp requires "-c -d "; FreeBSD requires "-t ". ############################################################################### TMPDIR="-p /tmp" ############################################################################### # Mailman queue directory ############################################################################### QUEUEDIR="/usr/local/mailman/qfiles" ############################################################################### # Mailman log directory ############################################################################### LOGDIR="/usr/local/mailman/logs" ############################################################################### # Mailman data directory ############################################################################### DATADIR="/usr/local/mailman/data" ############################################################################### # Mailman preserved messages directory ############################################################################### SPAMDIR="/usr/local/mailman/spam" ############################################################################### # Maximum number of subdirectory entries to display in report ############################################################################### MAX_QUEUE_LINES=20 ############################################################################### # Maximum number of moderation queue pickle files to display in report ############################################################################### MAX_DATA_LINES=100 ############################################################################### # Mailman Log files to check for errors. # No need to specify path, only log file name. ############################################################################### ERR_LOGS="error fromusenet locks mischief security post qrunner smtp-failure vette" ############################################################################### # Mailman Log files to summarize. # No need to specify path, only log file name. ############################################################################### SUM_LOGS="fromusenet post smtp" ############################################################################### # Mailman queue subdirectories to check. No need to specify path, only name. ############################################################################### SUBDIRS="archive bad bounces commands in news out retry shunt virgin" ############################################################################### # Specify the field specifier used by your sort command to select the second # field. This will normally be "+1" or "-k 2". ############################################################################### SORT_FIELD="+1" ############################################################################### # Specify recipients for report. If none, then simply print to "STDOUT". # Specify sender address for report. Not used if recipient list is empty. ############################################################################### SENDER="INSERT.YOUR.SENDER.ADDRESS@HERE" RCPTS="INSERT.YOUR.RECIPIENTS.ADDRESSES@HERE" ############################################################################### # If you run this program in cron at 23:59:00, you need to sleep sixty # seconds to make sure that you capture all the logs for the previous day. # Comment this line out to disable sleeping altogether. ############################################################################### SLEEPTIME=60 ############################################################################### # What user id is Mailman installed under? # How do we determine what UID this program is running as? # NB: There will probably be SysV vs. BSD semantic differences here. # Be careful. Make sure the command you specify actually works. # The command string specified here may seem arcane, but should pull # out the information we need, and throw away everything else. If # there is an easier cross-platform way to do it, please let me know. ############################################################################### GRABUID=`$PS -o user -p $$ | $TAIL -1` MYUID=`echo $GRABUID` RUNAS="mailman" ############################################################################### # No modifications below this line should be required. ############################################################################### DAY=`$DATE '+%b %d'` YEAR=`$DATE '+%Y'` PROG=`$BASENAME $0` if [ "${MYUID}" != "${RUNAS}" -a "${MYUID}" != "root" ] ; then echo "ERROR: You must be root or ${RUNAS} to run $PROG." exit 1 fi if [ "${SLEEPTIME}" != "" -a "${RCPTS}x" != "${SENDER}x" ] ; then if [ $SLEEPTIME -gt 0 ] ; then $SLEEP $SLEEPTIME fi fi TMP=`$MKTEMP $TMPDIR` TMPLOG=`$MKTEMP $TMPDIR` if [ "${RCPTS}x" != "x" ] ; then echo "From: ${SENDER}" >> $TMP echo "To: ${RCPTS}" >> $TMP echo "Subject: Mailman Daily Status Report: $DAY $YEAR" >> $TMP echo "" >> $TMP fi echo " Mailman Daily Status Report: $DAY $YEAR" >> $TMP echo "" >> $TMP echo "" >> $TMP echo "******************************" >> $TMP echo "Log File Summary" >> $TMP echo "******************************" >> $TMP echo "" >> $TMP for LOG in $SUM_LOGS do echo "Log file: $LOG" >> $TMP echo "==============================" >> $TMP if [ -f "$LOGDIR/${LOG}" ] ; then if [ -f "$LOGDIR/${LOG}.1" ] ; then $SED -e :a -e '$!N;s/\n //;ta' -e 'P;D' ${LOGDIR}/${LOG}.1 $LOGDIR/$LOG | $GREP -si "^$DAY [0-9][0-9:]* $YEAR" > $TMPLOG else $SED -e :a -e '$!N;s/\n //;ta' -e 'P;D' $LOGDIR/$LOG | $GREP -si "^$DAY [0-9][0-9:]* $YEAR" > $TMPLOG fi if [ "${LOG}" = "post" ] ; then echo "" >> $TMP echo "Hourly Summary of Posts" >> $TMP echo "-----------------------" >> $TMP $SED -e 's/^[A-Z][a-z][a-z] *[0-9]* //' -e 's/:.*$//' $TMPLOG | $UNIQ -c | $SORT -n $SORT_FIELD | $AWK '{ printf( "%8d %02d:00-%02d:59\n", $1, $2, $2 ) }' >> $TMP echo "" >> $TMP echo "Post Count by List" >> $TMP echo "------------------" >> $TMP $SED -e 's/^.* post to //' -e 's/ .*$//' $TMPLOG | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Post Count by Sender" >> $TMP echo "--------------------" >> $TMP $SED -e 's/^.* from //' -e 's/,.*$//' $TMPLOG | $SORT | $UNIQ -c | $SORT -nr >> $TMP elif [ "${LOG}" = "fromusenet" ] ; then GRPS=`$EGREP -vi '(watermark:|nothing new| gating |: \[[0-9\.]*\])' $TMPLOG | $GREP -i ' posted to ' | $AWK '{ print $9 }' | $SED -e 's/:$//' | $SORT -u | $FMT -w 75` for GRP in $GRPS do echo "" >> $TMP echo "$GRP Article #'s Gated:" >> $TMP echo "------------------------------" >> $TMP $EGREP -vi '(watermark:|nothing new| gating |: \[[0-9\.]*\])' $TMPLOG | $GREP -i " posted to " | $GREP -i " $GRP: " | $AWK '{print $10}' | $SORT -u | $FMT -w 75 >> $TMP done elif [ "${LOG}" = "smtp" ] ; then echo "" >> $TMP echo "Hourly Summary of Messages Sent" >> $TMP echo "-------------------------------" >> $TMP $SED -e 's/^[A-Z][a-z][a-z] *[0-9]* //' -e 's/:.* for / /' -e 's/ recips,.*$//' $TMPLOG | $AWK '{ val=int($1); sum[val]+=$2 } END { for (i=0; i<24; i++) { printf "%8d %02d:00-%02d:59\n", sum[i], i, i } }' >> $TMP else $SED 's/^.* ([0-9]*) //' $TMPLOG | $SORT | $UNIQ -c | $SORT -nr >> $TMP fi else echo " ### Log file ${LOG} does not exist ### " >> $TMP fi echo "" >> $TMP done echo "******************************" >> $TMP echo "Log File Squawks" >> $TMP echo "******************************" >> $TMP echo "" >> $TMP for LOG in $ERR_LOGS do echo "Log file: $LOG" >> $TMP echo "==============================" >> $TMP if [ -f "$LOGDIR/${LOG}" ] ; then if [ -f "$LOGDIR/${LOG}.1" ] ; then $GREP -si "^$DAY [0-9][0-9:]* $YEAR" ${LOGDIR}/${LOG}.1 ${LOGDIR}/${LOG} | $SED "s/^[^:]*://" > $TMPLOG else $GREP -si "^$DAY [0-9][0-9:]* $YEAR" ${LOGDIR}/${LOG} > $TMPLOG fi if [ "${LOG}" = "error" ] ; then echo "Uncaught Runner Exceptions:" >> $TMP echo "------------------------------" >> $TMP $GREP 'Uncaught runner exception' $TMPLOG | $SED 's/^.*exception: //' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "No Such List:" >> $TMP echo "------------------------------" >> $TMP $GREP 'No such list' $TMPLOG | $SED -e 's/^[^)]*) //' -e 's/No such list "//' -e 's/"[^"]*$//' | $SORT | $UNIQ -c | $SORT -nr >> $TMP CNT=`$GREP -i 'shunting' $TMPLOG | $WC -l` if [ "${CNT}x" != "x" ] ; then if [ ${CNT} -gt 0 ] ; then echo "" >> $TMP echo "Shunting Count: $CNT" >> $TMP echo "------------------------------" >> $TMP fi fi echo "" >> $TMP echo "Other Errors:" >> $TMP echo "------------------------------" >> $TMP $EGREP -vi '(Uncaught runner exception|No such list|Traceback|shunting)' $TMPLOG | $SED -e 's/^.* ([0-9]*) //' -e 's/unparseable message.*/unparseable message/' -e 's/preserving file.*/preserving file/' | $SORT | $UNIQ -c | $SORT -nr >> $TMP elif [ "${LOG}" = "fromusenet" ] ; then $EGREP -vi '(watermark:|nothing new| posted to |: \[[0-9\.]*\])' $TMPLOG | $GREP -vi " gating " | $SED 's/^.* ([0-9]*) //' | $SORT | $UNIQ -c | $SORT -nr >> $TMP elif [ "${LOG}" = "mischief" ] ; then echo "" >> $TMP echo "Login failure with private rosters (by user):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'Login failure with private rosters' $TMPLOG | $AWK '{ print $(NF-2) " " $(NF-1) " " $NF }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Unsub attempt of non-member (by user):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'Unsub attempt of non-member' $TMPLOG | $AWK '{ print $NF }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Reminder attempt of non-member (by user):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'Reminder attempt of non-member' $TMPLOG | $AWK '{ print $NF }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Other Messages:" >> $TMP echo "------------------------------" >> $TMP $EGREP -vi '(Login failure with private rosters|Unsub attempt of non-member|Reminder attempt of non-member)' $TMPLOG | $SED 's/^.* ([0-9]*) //' | $SORT | $UNIQ -c | $SORT -nr >> $TMP elif [ "${LOG}" = "security" ] ; then $GREP 'Authorization failed' $TMPLOG | $SED 's/^.* ([0-9]*) //' | $SORT | $UNIQ -c | $SORT -nr >> $TMP elif [ "${LOG}" = "post" ] ; then $GREP -vi 'success' $TMPLOG | $SED 's/^.* ([0-9]*) //' | $SORT | $UNIQ -c | $SORT -nr >> $TMP elif [ "${LOG}" = "vette" ] ; then echo "" >> $TMP echo "Message held -- Post by non-member (by list):" >> $TMP echo "------------------------------" >> $TMP $GREP 'Post by non-member' $TMPLOG | $AWK '{ print $6 }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Message held -- Suspicious header (by list):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'suspicious header' $TMPLOG | $AWK '{ print $6 }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Discarded posting (by list):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'Discarded posting' $TMPLOG | $AWK '{ print $6 }' | $SED 's/:$//' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Bulk/Junk message discarded (by list):" >> $TMP echo "------------------------------" >> $TMP $EGREP -i '(bulk|junk) message discarded' $TMPLOG | $AWK '{ print $NF }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Implicit destination (by list):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'Message has implicit destination' $TMPLOG | $AWK '{ print $6 }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Post to moderated newsgroup (by list):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'Posting to a moderated newsgroup' $TMPLOG | $AWK '{ print $6 }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Post to moderated list (by list):" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'Post to moderated list' $TMPLOG | $AWK '{ print $6 }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Held Subscriptions" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'held subscription request' $TMPLOG | $AWK '{ print $6 " " $11 }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Banned Subscriptions" >> $TMP echo "------------------------------" >> $TMP $GREP -i 'banned subscription' $TMPLOG | $AWK '{ print $6 " " $9 }' | $SED -e 's/\+[0-9][0-9]*@/+@/' -e 's/\+[a-z][a-z]*@/+@/' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "DMARC lookups" >> $TMP echo "------------------------------" >> $TMP $GREP -i "DMARC lookup for" $TMPLOG | $AWK '{ print $6 " " $10 " " $13 }' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP echo "Other Errors:" >> $TMP echo "------------------------------" >> $TMP $EGREP -vi '(Post by non-member|suspicious header|message approved|Discarded posting|bulk message discarded|junk message discarded|Message has implicit destination|Posting to a moderated newsgroup|Post to moderated list|Message discarded, msgid|held subscription request|banned subscription|dmarc lookup for)' $TMPLOG | $SED -e 's/^.* ([0-9]*) //' -e 's/, message-id=<[^> ]*>:/:/' | $SORT | $UNIQ -c | $SORT -nr >> $TMP elif [ "${LOG}" = "smtp-failure" ] ; then $SED 's/^.* ([0-9]*) //' $TMPLOG | $SED 's/delivery to [^@ ]*@[^@ ]* failed with code/delivery failed with code/g' | $SORT | $UNIQ -c | $SORT -nr >> $TMP else $SED 's/^.* ([0-9]*) //' $TMPLOG | $SORT | $UNIQ -c | $SORT -nr >> $TMP fi else echo " ### Log file ${LOG} does not exist ### " >> $TMP fi echo "" >> $TMP done echo "******************************" >> $TMP echo "Queue Directory Contents" >> $TMP echo "******************************" >> $TMP echo "" >> $TMP cd $QUEUEDIR for DIR in $SUBDIRS do if [ -d $DIR ] ; then $LS -la $DIR > $TMPLOG LINES=`$WC -l < $TMPLOG` LINES=`expr $LINES - 3` echo "Subdirectory: $DIR" >> $TMP echo "==============================" >> $TMP echo "Entries: $LINES" >> $TMP echo "------------------------------" >> $TMP if [ $LINES -le $MAX_QUEUE_LINES ] ; then $CAT $TMPLOG >> $TMP else $HEAD $TMPLOG >> $TMP echo "" >> $TMP echo " More than $MAX_QUEUE_LINES total entries, skipping ..." >> $TMP echo "" >> $TMP $TAIL $TMPLOG >> $TMP fi echo "" >> $TMP fi done echo "******************************" >> $TMP echo "Data Directory Contents" >> $TMP echo " (Python pickle files only)" >> $TMP echo "******************************" >> $TMP cd $DATADIR $LS -la | $GREP -i '\.pck$' > $TMPLOG LINES=`$WC -l < $TMPLOG` echo "Python pickle files: $LINES" >> $TMP echo "==============================" >> $TMP echo "" >> $TMP if [ $LINES -le $MAX_DATA_LINES ] ; then $CAT $TMPLOG >> $TMP else $HEAD $TMPLOG >> $TMP echo "" >> $TMP echo " More than $MAX_DATA_LINES total entries, skipping ..." >> $TMP echo "" >> $TMP $TAIL $TMPLOG >> $TMP fi echo "" >> $TMP echo "******************************" >> $TMP echo "Moderation Queue Summary" >> $TMP echo "******************************" >> $TMP echo "" >> $TMP $AWK '{ print $NF }' $TMPLOG | $GREP -i '^heldmsg-' | $SED -e 's/^heldmsg-//' -e 's/-[0-9]*\.pck$//' | $SORT | $UNIQ -c | $SORT -nr >> $TMP echo "" >> $TMP if [ -d $SPAMDIR ] ; then cd $SPAMDIR $LS -la | $GREP -i '\.msg$' > $TMPLOG LINES=`$WC -l < $TMPLOG` echo "******************************" >> $TMP echo "Preserved Messages Directory Contents" >> $TMP echo " (.msg files only)" >> $TMP echo "******************************" >> $TMP echo "Files: $LINES" >> $TMP echo "==============================" >> $TMP echo "" >> $TMP if [ $LINES -le $MAX_DATA_LINES ] ; then $CAT $TMPLOG >> $TMP else $HEAD $TMPLOG >> $TMP echo "" >> $TMP echo " More than $MAX_DATA_LINES total entries, skipping ..." >> $TMP echo "" >> $TMP $TAIL $TMPLOG >> $TMP fi echo "" >> $TMP fi ############################################################################### # Okay, we're done with all the code stuff, now handle the output ############################################################################### if [ "${RCPTS}x" != "x" ] ; then $SENDMAIL -t -f$SENDER < $TMP else $CAT $TMP fi $RM $TMP $TMPLOG