Bumped version and updated docs for 2.1.16rc1.

1 files changed, 294 insertions, 302 deletions

diff --git a/doc/mailman-member.txt b/doc/mailman-member.txt
index 683e010f..33d754dd 100644
--- a/doc/mailman-member.txt
+++ b/doc/mailman-member.txt
@@ -1,9 +1,8 @@
+   #GNU mailman - list Member Manual Contents About this document... About
+   this document...
 
-   #GNU mailman - list Member Manual Contents About this document...
-   About this document...
-
-   Previous Page Up one Level Next Page GNU Mailman - List Member Manual
-     _________________________________________________________________
+    Previous Page Up one Level Next Page GNU Mailman - List Member Manual
+     __________________________________________________________________
 
 GNU Mailman - List Member Manual
 
@@ -12,9 +11,9 @@ GNU Mailman - List Member Manual
    terri(at)zone12.com
 
    Release 2.1
-   May 15, 2012
+   July 14, 2013
 
-                                 Front Matter
+                                  Front Matter
 
   Abstract:
 
@@ -59,8 +58,8 @@ Contents
           + 8 Digests
                o 8.1 How can I start or stop getting the list posts
                  grouped into one big email? (digest option)
-               o 8.2 What are MIME and Plain Text Digests? How do I
-                 change which one I get? (digest option)
+               o 8.2 What are MIME and Plain Text Digests? How do I change
+                 which one I get? (digest option)
           + 9 Mailing list topics
                o 9.1 How do I make sure that my post has the right topic?
                o 9.2 How do I subscribe to all or only some topics on a
@@ -80,7 +79,7 @@ Contents
           + 1 Email commands quick reference
           + 2 Member options quick reference
 
-                                1 Introduction
+                                 1 Introduction
 
    This document is intended to help the members of a Mailman 2.1 mailing
    list learn to use the features available to them. It covers the use of
@@ -99,13 +98,13 @@ Contents
 
    Note: For the purposes of this document, we assume that the reader is
    familiar with common terms related to email (eg: Subject line, body of
-   the message) and web sites (eg: drop-down box, button) or can look
-   them up. We also assume that the reader can already use his or her
-   email program and web browser well enough that instructions such as
-   "send email to this address" or "visit this web page" or "fill in the
-   form provided" are clear. If you are not familiar with these actions,
-   you may want to consult other documentation to learn how to do these
-   things with your particular setup.
+   the message) and web sites (eg: drop-down box, button) or can look them
+   up. We also assume that the reader can already use his or her email
+   program and web browser well enough that instructions such as "send
+   email to this address" or "visit this web page" or "fill in the form
+   provided" are clear. If you are not familiar with these actions, you
+   may want to consult other documentation to learn how to do these things
+   with your particular setup.
 
 1.1 Acknowledgements
 
@@ -129,16 +128,16 @@ Contents
    information is being sent. If you were a magazine publisher, you would
    have a list of the mailing addresses of all the subscribers to the
    magazine. In the case of an electronic mailing list, we use a list of
-   email addresses from people interested in hearing about or discussing
-   a given topic.
+   email addresses from people interested in hearing about or discussing a
+   given topic.
 
    Two common types of email mailing lists are announcement lists and
    discussion lists.
 
    Announcement lists are are used so that one person or group can send
    announcements to a group of people, much like a magazine publisher's
-   mailing list is used to send out magazines. For example, a band may
-   use a mailing list to let their fan base know about their upcoming
+   mailing list is used to send out magazines. For example, a band may use
+   a mailing list to let their fan base know about their upcoming
    concerts.
 
    A discussion list is used to allow a group of people to discuss topics
@@ -146,23 +145,23 @@ Contents
    have it distributed to everyone in the group. This discussion may also
    be moderated, so only selected posts are sent on to the group as a
    whole, or only certain people are allowed to send to the group. For
-   example, a group of model plane enthusiasts might use a mailing list
-   to share tips about model construction and flying.
+   example, a group of model plane enthusiasts might use a mailing list to
+   share tips about model construction and flying.
 
    Some common terms:
-     * A "post" typically denotes a message sent to a mailing list.
-       (Think of posting a message on a bulletin board.)
+     * A "post" typically denotes a message sent to a mailing list. (Think
+       of posting a message on a bulletin board.)
      * People who are part of an electronic mailing list are usually
        called the list's "members" or "subscribers."
      * "List administrators" are the people in charge of maintaining that
        one list. Lists may have one or more administrators.
-     * A list may also have people in charge of reading posts and
-       deciding if they should be sent on to all subscribers. These
-       people are called list moderators.
+     * A list may also have people in charge of reading posts and deciding
+       if they should be sent on to all subscribers. These people are
+       called list moderators.
      * Often more than one electronic mailing list will be run using the
-       same piece of software. The person who maintains the software
-       which runs the lists is called the "site administrator." Often the
-       site administrator also administrates individual lists.
+       same piece of software. The person who maintains the software which
+       runs the lists is called the "site administrator." Often the site
+       administrator also administrates individual lists.
 
 1.3 GNU Mailman
 
@@ -190,8 +189,8 @@ Contents
    typical list address. The capital letters used for the list-specific
    parts of each address should make it easier to see what should be
    changed for each list. Although specific list configurations may be
-   different, you will probably be able to just replace the words given
-   in capital letters with the appropriate values for a real list:
+   different, you will probably be able to just replace the words given in
+   capital letters with the appropriate values for a real list:
 
    LISTNAME
           The name of your list.
@@ -200,36 +199,36 @@ Contents
           The name of the mail server which handles that list.
 
    WEBSERVER
-          The name of the web server which handles the list web
-          interface. This may be the same as DOMAIN, and often refers to
-          the same machine, but does not have to be identical.
+          The name of the web server which handles the list web interface.
+          This may be the same as DOMAIN, and often refers to the same
+          machine, but does not have to be identical.
 
    As a real-life example, if you are interested in the mailman-users
    list, you'd make the following substitutions: LISTNAME=mailman-users,
    DOMAIN=python.org, WEBSERVER=mail.python.org. As such, for the
-   mailman-users@python.org mailing list, the list information page can
-   be found at the URL
-   http://mail.python.org/mailman/listinfo/mailman-users. (These, unlike
-   most of the examples given in this document, are real addresses.)
+   mailman-users@python.org mailing list, the list information page can be
+   found at the URL http://mail.python.org/mailman/listinfo/mailman-users.
+   (These, unlike most of the examples given in this document, are real
+   addresses.)
 
    Most lists will have this information stored in the List-*: headers.
    Many mail programs will hide these by default, so you may have to
    choose to view full headers before you can see these informational
    headers.
 
-                            3 Mailman's interfaces
+                             3 Mailman's interfaces
 
    Mailman has two different interfaces for the list subscriber: the web
-   interface and the email interface. Most discussion list subscribers
-   use the email interface, since this includes the email address you use
-   to send mail to all the subscribers of that list.
+   interface and the email interface. Most discussion list subscribers use
+   the email interface, since this includes the email address you use to
+   send mail to all the subscribers of that list.
 
    The interface you use for changing options is largely a matter of
    preference, since most (but not all) of the options which can be
-   changed from the web interface can also be changed by email. Usually
-   it is easier to use the web interface for changing options, since the
-   web interface provides instructions as you go, but there are times
-   when people may prefer the email interface, so both are provided.
+   changed from the web interface can also be changed by email. Usually it
+   is easier to use the web interface for changing options, since the web
+   interface provides instructions as you go, but there are times when
+   people may prefer the email interface, so both are provided.
 
 3.1 The web interface
 
@@ -239,10 +238,10 @@ Contents
    options do.
 
    Every mailing list is also accessible by a number of web pages. Note
-   that the exact URLs are configurable by the site administrator, so
-   they may be different than what's described below. We'll describe the
-   most common configuration, but check with your site administrator or
-   hosting service for details.
+   that the exact URLs are configurable by the site administrator, so they
+   may be different than what's described below. We'll describe the most
+   common configuration, but check with your site administrator or hosting
+   service for details.
 
    List information (listinfo) page
 
@@ -252,19 +251,19 @@ Contents
           + The listinfo page is the starting point for the subscriber
             interface. As one would assume from the name it's given, it
             contains information about the LISTNAME list. Usually all the
-            other subscriber pages can be accessed from this point, so
-            you really only need to know this one address.
+            other subscriber pages can be accessed from this point, so you
+            really only need to know this one address.
 
    Member options page
 
           + Usually found at
             http://WEBSERVER/mailman/options/LISTNAME/EMAIL (For example,
-            http://lists.example.com/mailman/options/mylist/kathy@here.co
-            m)
+            http://lists.example.com/mailman/options/mylist/kathy@here.com
+            )
           + This page can also be accessed by going to the listinfo page
-            and entering your email address into the box beside the
-            button marked "Unsubscribe or Edit Options" (this is near the
-            bottom of the page).
+            and entering your email address into the box beside the button
+            marked "Unsubscribe or Edit Options" (this is near the bottom
+            of the page).
           + The member options page allows you to log in/out and change
             your list settings, as well as unsubscribe or get a copy of
             your password mailed to you.
@@ -285,11 +284,11 @@ Contents
             http://lists.example.com/pipermail/mylist or
             http://lists.example.com/mailman/private/mylist)
           + The list archive pages have copies of the posts sent to the
-            mailing list, usually grouped by month. In each monthly
-            group, the posts are usually indexed by author, date, thread,
-            and subject.
-          + Note: Pipermail is the name of the default archiver that
-            comes with Mailman. Other archive programs are available.
+            mailing list, usually grouped by month. In each monthly group,
+            the posts are usually indexed by author, date, thread, and
+            subject.
+          + Note: Pipermail is the name of the default archiver that comes
+            with Mailman. Other archive programs are available.
           + If the archive is private, you will need to supply your
             subscribed email address and your password to log in. (See
             Section 6.1 for more information on getting your password.)
@@ -299,8 +298,8 @@ Contents
    Every mailing list has a set of email addresses to which messages can
    be sent. There's always one address for posting messages to the list,
    one address to which bounces are sent, and addresses for processing
-   email commands. For a fictional mailing list called
-   mylist@example.com, you'd find these addresses:
+   email commands. For a fictional mailing list called mylist@example.com,
+   you'd find these addresses:
 
      * mylist@example.com - this is the email address people should use
        for new postings to the list.
@@ -311,8 +310,8 @@ Contents
      * mylist-leave@example.com - by sending a message to this address, a
        member can request unsubscription from the list. As with the -join
        address, the Subject: header and body of the message is ignored.
-       Note that mylist-unsubscribe@example.com is an alias for the
-       -leave address.
+       Note that mylist-unsubscribe@example.com is an alias for the -leave
+       address.
      * mylist-owner@example.com - This address reaches the list owner and
        list moderators directly. This is the address you use if you need
        to contact the person or people in charge.
@@ -324,10 +323,9 @@ Contents
        members whose addresses have become either temporarily or
        permanently inactive. The -bounces address is also a mail robot
        that processes bounces and automatically disables or removes
-       members as configured in the bounce processing settings. Any
-       bounce messages that are either unrecognized, or do not seem to
-       contain member addresses, are forwarded to the list
-       administrators.
+       members as configured in the bounce processing settings. Any bounce
+       messages that are either unrecognized, or do not seem to contain
+       member addresses, are forwarded to the list administrators.
      * mylist-confirm@example.com - This address is another email robot,
        which processes confirmation messages for subscription and
        unsubscription requests.
@@ -336,15 +334,15 @@ Contents
    administrators, but this address only exists for compatibility with
    older versions of Mailman.
 
-   For changing options, we use the LISTNAME-request address (for
-   example, mylist-request@example.com).
+   For changing options, we use the LISTNAME-request address (for example,
+   mylist-request@example.com).
 
    Commands can appear in the subject line or the body of the message.
    Each command should be on a separate line. If your mail program
-   automatically appends a signature to your messages, you may want to
-   put the word "end" (without the quotes) on a separate line after your
-   other commands. The end command tells Mailman not to process the email
-   after that point.
+   automatically appends a signature to your messages, you may want to put
+   the word "end" (without the quotes) on a separate line after your other
+   commands. The end command tells Mailman not to process the email after
+   that point.
 
    The most important command is probably the "help" command, since it
    makes Mailman return a message full of useful information about the
@@ -354,7 +352,7 @@ Contents
    Appendices A and B. (These have been slightly adapted from the output
    of the help command.)
 
-                         4 I need to talk to a human!
+                          4 I need to talk to a human!
 
    If you have any trouble with any of these commands, you can always
    reach the person or people in charge of a list by using the list
@@ -375,9 +373,9 @@ Contents
 
                         5 Subscribing and unsubscribing
 
-   Since subscribing (joining) and unsubscribing (leaving) lists are
-   often the only things a list member needs to know, these can both be
-   done without requiring you to know a password.
+   Since subscribing (joining) and unsubscribing (leaving) lists are often
+   the only things a list member needs to know, these can both be done
+   without requiring you to know a password.
 
 5.1 How do I join a list? (subscribe)
 
@@ -396,9 +394,9 @@ Contents
             Warning: Do NOT use a valuable password, since this password
             may be mailed to you in plain text.
           + If the list supports more than one language, you may be able
-            to choose your preferred language. Note: This setting does
-            not affect posts to the list, only pre-prepared Mailman texts
-            such as your member options page.
+            to choose your preferred language. Note: This setting does not
+            affect posts to the list, only pre-prepared Mailman texts such
+            as your member options page.
     3. Press the subscribe button. A new page should appear telling you
        that your request has been sent.
 
@@ -406,29 +404,29 @@ Contents
     1. Open a mail program which sends mail from the address you want to
        subscribe.
     2. Send a mail to the list subscription address, which will be in the
-       form LISTNAME-join@DOMAIN. The subject and body of the message
-       will be ignored, so it doesn't matter what you put there.
+       form LISTNAME-join@DOMAIN. The subject and body of the message will
+       be ignored, so it doesn't matter what you put there.
 
-   After following one of these sets of instructions (you don't need to
-   do both!), there are a few possible outcomes depending upon the
-   settings for that list.
+   After following one of these sets of instructions (you don't need to do
+   both!), there are a few possible outcomes depending upon the settings
+   for that list.
      * You may receive an email message asking for confirmation that you
-       really want to be subscribed to the list. This is to prevent
-       anyone from subscribing you to lists without your permission.
-       Follow the instructions given in the message to confirm your wish
-       to be subscribed.
+       really want to be subscribed to the list. This is to prevent anyone
+       from subscribing you to lists without your permission. Follow the
+       instructions given in the message to confirm your wish to be
+       subscribed.
      * A moderator may also need to confirm your subscription if you are
        subscribing to a limited list.
-     * Or you may have to wait for a moderator and follow the
-       instructions in the confirmation mail.
+     * Or you may have to wait for a moderator and follow the instructions
+       in the confirmation mail.
 
    Once this is done, you will likely receive another message welcoming
    you to the list. This message contains some useful information
    including your list password and some quick links for changing your
    options, so you may want to save it for later reference.
 
-   Note: Subscribing can be done in other ways as well. See Appendix A
-   for more advanced email subscribing commands.
+   Note: Subscribing can be done in other ways as well. See Appendix A for
+   more advanced email subscribing commands.
 
 5.2 How do I leave a list? (unsubscribe)
 
@@ -462,28 +460,28 @@ Contents
        form LISTNAME-leave@DOMAIN. The subject and body of this message
        will be ignored, so it doesn't matter what you put there.
 
-   After following one of these sets of instructions (you don't need to
-   do both!), you will be sent a confirmation mail and must follow the
-   instructions given in that mail to complete the unsubscription. This
-   is to stop people from unsubscribing you without your permission. In
+   After following one of these sets of instructions (you don't need to do
+   both!), you will be sent a confirmation mail and must follow the
+   instructions given in that mail to complete the unsubscription. This is
+   to stop people from unsubscribing you without your permission. In
    addition, a moderator may need to approve your unsubscription.
 
    If you do not receive this confirmation mail with instructions, make
-   sure that you typed your email address correctly (if you were using
-   the web interface to unsubscribe) and that the address you tried to
+   sure that you typed your email address correctly (if you were using the
+   web interface to unsubscribe) and that the address you tried to
    unsubscribe is, indeed, actually subscribed to that list. For security
    reasons, Mailman generates the same member options page regardless of
    whether the address entered is subscribed or not. This means that
-   people cannot use this part of the web interface to find out if
-   someone is subscribed to the list, but it also means that it's hard to
-   tell if you just made a typo.
+   people cannot use this part of the web interface to find out if someone
+   is subscribed to the list, but it also means that it's hard to tell if
+   you just made a typo.
 
    Once your unsubscription has been processed, you will will probably
    receive another message confirming your unsubscription from the list,
    and at that point you should stop receiving messages.
 
-   If you wish to skip the confirmation process (for example, you might
-   be unsubscribing an address which no longer works), it is possible to
+   If you wish to skip the confirmation process (for example, you might be
+   unsubscribing an address which no longer works), it is possible to
    bypass it by using your password instead and either logging in to your
    options page using it (See Section 3.1), or sending it with your email
    commands to LISTNAME-request (See Appendix A for advanced email
@@ -495,24 +493,24 @@ Contents
    Your password was either set by you or generated by Mailman when you
    subscribed. You probably got a copy of it in a welcome message sent
    when you joined the list, and you may also receive a reminder of it
-   every month. It is used to verify your identity to Mailman so that
-   only the holder of the password (you!) and the administrators can view
-   and change your settings.
+   every month. It is used to verify your identity to Mailman so that only
+   the holder of the password (you!) and the administrators can view and
+   change your settings.
 
    Warning: Do NOT use a valuable password for Mailman, since it can be
    sent in plain text to you.
 
 6.1 How do I get my password?
 
-   If you've forgotten your password and haven't saved the welcome
-   message or any reminder messages, you can always get a reminder
-   through the web interface:
+   If you've forgotten your password and haven't saved the welcome message
+   or any reminder messages, you can always get a reminder through the web
+   interface:
 
-    1. Go to the list information page for the list from which you wish
-       to get your password (This will probably be something like
+    1. Go to the list information page for the list from which you wish to
+       get your password (This will probably be something like
        http://WEBSERVER/mailman/listinfo/LISTNAME)
-    2. Look for the section marked "LISTNAME subscribers" (this section
-       is usually found near the bottom of the page).
+    2. Look for the section marked "LISTNAME subscribers" (this section is
+       usually found near the bottom of the page).
     3. There should be a button marked "Unsubscribe or Edit Options."
        Enter your email address in the box beside this button and press
        the button.
@@ -525,9 +523,9 @@ Contents
    address you used is, indeed, actually subscribed to that list. For
    security reasons, Mailman generates the same member options page
    regardless of whether the address entered is subscribed or not. This
-   means that people cannot use this part of the web interface to find
-   out if someone is subscribed to the list, but it also means that it's
-   hard to tell if you just made a typo.
+   means that people cannot use this part of the web interface to find out
+   if someone is subscribed to the list, but it also means that it's hard
+   to tell if you just made a typo.
 
    You can also get a reminder using the email interface,
     1. Send a mail to LISTNAME-request@DOMAIN with the command password
@@ -550,9 +548,9 @@ Contents
        page and enter your new password in the appropriate boxes, then
        press the button marked "Change My Password."
 
-   This can also be changed for multiple lists at the same time if you
-   are subscribed to more than one list on the same domain. See
-   Section 10.1 for information about changing settings globally.
+   This can also be changed for multiple lists at the same time if you are
+   subscribed to more than one list on the same domain. See Section 10.1
+   for information about changing settings globally.
 
    From the email interface:
     1. Send a mail to LISTNAME-request@DOMAIN with the command password
@@ -563,18 +561,18 @@ Contents
        If you are not sending mail from your membership address, you can
        also specify this address with address= $<$ ADDRESS $>$ after $<$
        NEWPASSWORD $>$ .
-       For example, if kathy@here.com wanted to change her mylist
-       password from zirc to miko, but she was sending mail from her work
-       address kathy@work.com, she could send a message to
+       For example, if kathy@here.com wanted to change her mylist password
+       from zirc to miko, but she was sending mail from her work address
+       kathy@work.com, she could send a message to
        mylist-request@example.com with the subject set to
        password zirc miko address=kathy@here.com.
 
 6.3 How do I turn password reminders on or off? (reminders option)
 
    If you don't wish to the reminder email including your password every
-   month, you can disable it from the member options page. (You can
-   always get the password mailed out when you actually want it. See
-   Section 6.1 for instructions.)
+   month, you can disable it from the member options page. (You can always
+   get the password mailed out when you actually want it. See Section 6.1
+   for instructions.)
 
    Using the web interface:
     1. Log in to your member options page. (See Section 3.1 for
@@ -582,9 +580,9 @@ Contents
     2. Look for the section marked "Get password reminder email for this
        list?" and change the value accordingly.
 
-   This can also be changed for multiple lists at the same time if you
-   are subscribed to more than one list on the same domain. See
-   Section 10.1 for information about changing settings globally.
+   This can also be changed for multiple lists at the same time if you are
+   subscribed to more than one list on the same domain. See Section 10.1
+   for information about changing settings globally.
 
    Using the email interface:
     1. Send a mail to LISTNAME-request@DOMAIN with the command
@@ -595,36 +593,35 @@ Contents
     2. Set it to "on" to receive reminders, and "off" to stop receiving
        reminders.
 
-                           7 Changing mail delivery
+                            7 Changing mail delivery
 
 7.1 How do I turn mail delivery on or off? (delivery option)
 
-   You may wish to temporarily stop getting messages from the list
-   without having to unsubscribe. If you disable mail delivery, you will
-   no longer receive messages, but will still be a subscriber and will
-   retain your password and other settings.
+   You may wish to temporarily stop getting messages from the list without
+   having to unsubscribe. If you disable mail delivery, you will no longer
+   receive messages, but will still be a subscriber and will retain your
+   password and other settings.
 
    This can be handy in a many different cases. For example, you could be
-   going on vacation or need a break from the list because you're too
-   busy to read any extra mail. Many mailing lists also allow only
-   subscribers to post to the list, so if you commonly send mail from
-   more than one address (eg, one address for at home and another for
-   when you're travelling), you may want to have more than one subscribed
-   account, but have only one of them actually receive mail. You can also
-   use this as a way to read private archives even on a list which may be
-   too busy for you to have sent directly to your mailbox. All you need
-   to do is subscribe, disable mail delivery, and use your password and
-   email to log in to the archives.
+   going on vacation or need a break from the list because you're too busy
+   to read any extra mail. Many mailing lists also allow only subscribers
+   to post to the list, so if you commonly send mail from more than one
+   address (eg, one address for at home and another for when you're
+   travelling), you may want to have more than one subscribed account, but
+   have only one of them actually receive mail. You can also use this as a
+   way to read private archives even on a list which may be too busy for
+   you to have sent directly to your mailbox. All you need to do is
+   subscribe, disable mail delivery, and use your password and email to
+   log in to the archives.
 
    To disable/enable mail delivery using the web interface:
     1. Log in to your options page. (See Section 3.1 for instructions.)
-    2. Go down to the section marked "Mail delivery" and select
-       "Disabled" to stop receiving mail, and "Enabled" to start
-       receiving mail.
+    2. Go down to the section marked "Mail delivery" and select "Disabled"
+       to stop receiving mail, and "Enabled" to start receiving mail.
 
-   This can also be changed for multiple lists at the same time if you
-   are subscribed to more than one list on the same domain. See
-   Section 10.1 for information about changing settings globally.
+   This can also be changed for multiple lists at the same time if you are
+   subscribed to more than one list on the same domain. See Section 10.1
+   for information about changing settings globally.
 
    To disable/enable mail delivery using the email interface:
     1. Send a mail to LISTNAME-request@DOMAIN with the command
@@ -651,9 +648,9 @@ Contents
     2. Scroll down to the bottom of the page to the section marked "Avoid
        duplicate copies of messages?" and change the value accordingly.
 
-   This can also be changed for multiple lists at the same time if you
-   are subscribed to more than one list on the same domain. See
-   Section 10.1 for information about changing settings globally.
+   This can also be changed for multiple lists at the same time if you are
+   subscribed to more than one list on the same domain. See Section 10.1
+   for information about changing settings globally.
 
    To turn this on or off using the email interface:
     1. Send a mail to LISTNAME-request@DOMAIN with the command
@@ -674,8 +671,8 @@ Contents
     3. If you wish to change your address for all subscriptions using the
        old address, select the "Change globally" box. If you have
        subscriptions under another address or for lists on a different
-       domain, these will have to be done separately. See Section 10.1
-       for more information about changing settings globally.
+       domain, these will have to be done separately. See Section 10.1 for
+       more information about changing settings globally.
 
    There is no special way to do this from the email interface, but you
    can subscribe and unsubscribe for more or less the same effect. (See
@@ -711,8 +708,8 @@ Contents
     2. Set it to "on" to receive copies of your own posts, and "off" to
        avoid receiving them.
 
-7.5 How can I get Mailman to tell me when my post has been received by the
-list? (ack option)
+7.5 How can I get Mailman to tell me when my post has been received by the list?
+(ack option)
 
    On most lists, you will simply receive a copy of your mail when it has
    gone through the list software, but if this is disabled (See
@@ -749,12 +746,12 @@ list? (ack option)
    There are a few common reasons for this:
      * No one has sent any mail to the list(s) you're on for a little
        while.
-       To check if this is the case, try visiting the archives of the
-       list (assuming that the list has archives). If the list has no
-       archives, you may have to ask another subscriber. (See Section 3.1
-       for help in finding the list archives.)
-       Note: Generally, it is considered impolite to send test messages
-       to the entire list. If you feel a need to test that the list is
+       To check if this is the case, try visiting the archives of the list
+       (assuming that the list has archives). If the list has no archives,
+       you may have to ask another subscriber. (See Section 3.1 for help
+       in finding the list archives.)
+       Note: Generally, it is considered impolite to send test messages to
+       the entire list. If you feel a need to test that the list is
        working and for some reason you cannot simply compose a regular
        message to the list, it is less disruptive to send a help message
        to the list request address (LISTNAME-request@DOMAIN) to see if
@@ -769,9 +766,8 @@ list? (ack option)
        example, the subscriber has found a new internet service provider
        and forgot to unsubscribe the old address), as well as addresses
        which are temporarily out-of-service (for example, the subscriber
-       has used up all of the allotted space for his or her email
-       account, or the subscriber's mail provider is experiencing
-       difficulties).
+       has used up all of the allotted space for his or her email account,
+       or the subscriber's mail provider is experiencing difficulties).
        Even if you are unaware of any difficulties with your mail
        provider, it is a good idea to check this. Some popular webmail
        providers and internet servers are not as reliable as one might
@@ -785,9 +781,9 @@ list? (ack option)
        marked "Mail Delivery" - if it is set to "Disabled," set it to
        "Enabled" to start receiving mail again. (For more instructions on
        disabling or enabling mail delivery, see Section 7.1.)
-       Note: Even if you have not been disabled at the time you check,
-       you could be bouncing messages and not have reached the threshold
-       for your subscription to be disabled. You may need to check again.
+       Note: Even if you have not been disabled at the time you check, you
+       could be bouncing messages and not have reached the threshold for
+       your subscription to be disabled. You may need to check again.
      * There is a delay or break in the networks between you and the list
        server.
        No matter what many of us would like, the internet is not 100%
@@ -795,8 +791,8 @@ list? (ack option)
        long time to get to you. Try to be patient, especially if the
        server is far (in terms of networks, not geography, although often
        one implies the other) from your internet service provider.
-       To check if this might be causing your problem, you can try
-       pinging the list server or tracing the route between you and it.
+       To check if this might be causing your problem, you can try pinging
+       the list server or tracing the route between you and it.
        (Instructions on how to do this varies from platform to platform,
        so you may want to use a search engine to find those appropriate
        for you.)
@@ -819,15 +815,15 @@ list? (ack option)
    moderately busy list, this typically means you get one email per day,
    although it may be more or less frequent depending upon the list.
 
-   You may also want to look at Section 8.2 which discusses MIME and
-   plain text digests.
+   You may also want to look at Section 8.2 which discusses MIME and plain
+   text digests.
 
    To turn digest mode on or off using the web interface,
     1. Log in to your member options page. (See Section 3.1 for more
        details on how to do this.)
     2. Look for the section marked "Set Digest Mode."
-       Set it to "On" to receive messages bundled together in digests.
-       Set it to "Off" to receive posts separately.
+       Set it to "On" to receive messages bundled together in digests. Set
+       it to "Off" to receive posts separately.
 
    To turn digest mode on or off using the email interface,
     1. Send a mail to LISTNAME-request@DOMAIN with the command
@@ -835,10 +831,10 @@ list? (ack option)
        Commands can appear in either the body or the subject of the
        message. (See Section 3.2 for more information about sending mail
        commands.)
-    2. Set it to "off" if you wish to receive individual posts
-       separately, and to "plain" or "mime" to receive posts grouped into
-       one large mail. See Section 8.2 for more information on plain
-       versus MIME digests.
+    2. Set it to "off" if you wish to receive individual posts separately,
+       and to "plain" or "mime" to receive posts grouped into one large
+       mail. See Section 8.2 for more information on plain versus MIME
+       digests.
 
 8.2 What are MIME and Plain Text Digests? How do I change which one I get?
 (digest option)
@@ -866,12 +862,12 @@ list? (ack option)
     1. Log in to your member options page. (See Section 3.1 for more
        details on how to do this.)
     2. Look for the section marked "Get MIME or Plain Text Digests?."
-       Set it to "MIME" to receive digests in MIME format, or "Plain
-       text" to receive digests in plain text format.
+       Set it to "MIME" to receive digests in MIME format, or "Plain text"
+       to receive digests in plain text format.
 
-   This can also be changed for multiple lists at the same time if you
-   are subscribed to more than one list on the same domain. See
-   Section 10.1 for information about changing settings globally.
+   This can also be changed for multiple lists at the same time if you are
+   subscribed to more than one list on the same domain. See Section 10.1
+   for information about changing settings globally.
 
    To set your digest type using the email interface,
     1. Send a mail to LISTNAME-request@DOMAIN with the command
@@ -879,18 +875,18 @@ list? (ack option)
        Commands can appear in either the body or the subject of the
        message. (See Section 3.2 for more information about sending mail
        commands.)
-    2. Set it to "plain" to get posts bundled into a plain text digest,
-       or "mime" to get posts bundled together into a MIME digest.
+    2. Set it to "plain" to get posts bundled into a plain text digest, or
+       "mime" to get posts bundled together into a MIME digest.
 
                              9 Mailing list topics
 
    Some lists are set up so that different topics are handled by Mailman.
-   For example, the courses list on Linuxchix.org is a discussion list
-   for courses being run by linuxchix members, and often there are
-   several courses being run at the same time. (eg: Networking for
-   beginners, C programming, LaTeX document mark up.) Each of the courses
-   being run is a separate topic on the list so that people can choose
-   only to receive the course they want to take.
+   For example, the courses list on Linuxchix.org is a discussion list for
+   courses being run by linuxchix members, and often there are several
+   courses being run at the same time. (eg: Networking for beginners, C
+   programming, LaTeX document mark up.) Each of the courses being run is
+   a separate topic on the list so that people can choose only to receive
+   the course they want to take.
 
    These topics must be configured by the list administrator, but it is
    the responsibility of each poster to make sure that their post is put
@@ -903,8 +899,7 @@ list? (ack option)
 
 9.1 How do I make sure that my post has the right topic?
 
-   When a list administrator defines a topic, he or she sets three
-   things:
+   When a list administrator defines a topic, he or she sets three things:
      * a topic name
      * a regular expression (regexp)
      * a description
@@ -930,29 +925,29 @@ list? (ack option)
    Here are some examples of possible regular expressions and matching
    lines:
 
-   Regular expression Matching lines
-   zuff Keywords: zuff
-   zuff Keywords: ZUFF
-   zuff Keywords: Zuff
-   zuff Keywords: amaryllis, zuff, applesauce
-   zuff Subject: [zuff] Do you have the right stuff for zuff?
-   zuff Subject: Do you have the right stuff for zuff?
-   zuff Subject: What is zuff?
-   \[zuff\] Keywords: [zuff]
-   \[zuff\] Subject: [zuff] Do you have the right stuff?
-   \[zuff\] Subject: Online zuff tutorials (was Re: [zuff] What is zuff?)
+Regular expression                        Matching lines
+zuff               Keywords: zuff
+zuff               Keywords: ZUFF
+zuff               Keywords: Zuff
+zuff               Keywords: amaryllis, zuff, applesauce
+zuff               Subject: [zuff] Do you have the right stuff for zuff?
+zuff               Subject: Do you have the right stuff for zuff?
+zuff               Subject: What is zuff?
+\[zuff\]           Keywords: [zuff]
+\[zuff\]           Subject: [zuff] Do you have the right stuff?
+\[zuff\]           Subject: Online zuff tutorials (was Re: [zuff] What is zuff?)
 
    A few notes:
-     * The matching is case-insensitive, so if zuff matches, so will
-       ZUFF, zuFF, and any other variations in capitalization.
-     * Some characters have special meaning in a regular expression, so
-       to match those characters specifically, they must be "escaped"
-       with a backslash (\). As you can see in the above example, [ and ]
-       are such characters. (Others include ".", "?", and "*"). The
-       backslash is also used for other things (I wasn't kidding about
-       regular expressions being complex: consult other documentation for
-       details about other uses of the backslash character), but this is
-       the most likely use in a topic expression.
+     * The matching is case-insensitive, so if zuff matches, so will ZUFF,
+       zuFF, and any other variations in capitalization.
+     * Some characters have special meaning in a regular expression, so to
+       match those characters specifically, they must be "escaped" with a
+       backslash (\). As you can see in the above example, [ and ] are
+       such characters. (Others include ".", "?", and "*"). The backslash
+       is also used for other things (I wasn't kidding about regular
+       expressions being complex: consult other documentation for details
+       about other uses of the backslash character), but this is the most
+       likely use in a topic expression.
 
 9.2 How do I subscribe to all or only some topics on a list?
 
@@ -960,24 +955,24 @@ list? (ack option)
    choose to subscribe to only part of a list by selecting the topics you
    want to receive.
 
-   If you wish to get all messages sent to the list, make sure you are
-   not subscribed to any topics.
+   If you wish to get all messages sent to the list, make sure you are not
+   subscribed to any topics.
 
     1. Log in to your member options page. (See Section 3.1 for more
        details on how to do this.)
     2. Look for the section marked "Which topic categories would you like
        to subscribe to?"
-       If any topics are defined, you can select those you wish. If you
-       do not select any topics of interest, you will receive all posts
-       sent to the list.
+       If any topics are defined, you can select those you wish. If you do
+       not select any topics of interest, you will receive all posts sent
+       to the list.
 
    You probably also want to look at Section 9.3 which discusses changing
    your settings for messages where no topic is set.
 
 9.3 How do I get or avoid getting messages with no topic set?
 
-   If you wish to get all messages sent to the list, make sure you are
-   not subscribed to any specific topic. (See Section 9.2.)
+   If you wish to get all messages sent to the list, make sure you are not
+   subscribed to any specific topic. (See Section 9.2.)
 
    If you are only subscribed to some topics, you can either choose to
    either receive or not receive messages with no topic set, much the way
@@ -986,24 +981,24 @@ list? (ack option)
    To change this setting,
     1. Log in to your member options page. (See Section 3.1 for more
        details on how to do this.)
-    2. Look for the section marked "Do you want to receive message that
-       do not match any topic filter?"
-       If you wish to receive messages with no topic set, select "Yes."
-       If you do not wish to receive such messages, choose "No."
+    2. Look for the section marked "Do you want to receive message that do
+       not match any topic filter?"
+       If you wish to receive messages with no topic set, select "Yes." If
+       you do not wish to receive such messages, choose "No."
 
    This setting has no effect if you are not subscribed to any topics.
 
-                           10 Setting other options
+                            10 Setting other options
 
 10.1 Change Globally? Set Globally? What does that mean?
 
    For some of the options given in your member options page, there is a
    tick-box which says "Change Globally" or "Set Globally." This means
    that if you change this option, you can also have the change made for
-   all your other list subscriptions with the same address to lists on
-   the same domain. This can be handy if, for example, you want to make
-   sure all your passwords are the same, or you are going on vacation and
-   want to turn off mail delivery from all the lists.
+   all your other list subscriptions with the same address to lists on the
+   same domain. This can be handy if, for example, you want to make sure
+   all your passwords are the same, or you are going on vacation and want
+   to turn off mail delivery from all the lists.
 
 10.2 How do I change my name as Mailman knows it?
 
@@ -1013,9 +1008,9 @@ list? (ack option)
     2. In the section marked "Changing your LISTNAME membership
        information," enter your new name in the appropriate box.
 
-   This can also be changed for multiple lists at the same time if you
-   are subscribed to more than one list on the same domain. See
-   Section 10.1 for information about changing settings globally.
+   This can also be changed for multiple lists at the same time if you are
+   subscribed to more than one list on the same domain. See Section 10.1
+   for information about changing settings globally.
 
    Note: You do not need to have a subscription name set.
 
@@ -1023,16 +1018,16 @@ list? (ack option)
 
    Mailman is available with many different languages. (For a complete
    listing see http://wiki.list.org/display/DEV/Languages.) This means
-   that, if your list has other languages enabled, you may be able to
-   have the web interface, etc. in a language of your choice.
+   that, if your list has other languages enabled, you may be able to have
+   the web interface, etc. in a language of your choice.
 
    Note: This does NOT necessarily mean that all the posts sent to the
    list will be in the language you selected. Only the pre-prepared texts
    presented by Mailman will be affected by this setting. Posts are in
    whatever language the poster uses.
 
-   Your preferred language is set when you subscribe (see Section5.1),
-   and can be changed later if the list supports more than one language.
+   Your preferred language is set when you subscribe (see Section5.1), and
+   can be changed later if the list supports more than one language.
 
    To change your preferred language in Mailman,
     1. Log in to your member options page. (See Section 3.1 for
@@ -1042,34 +1037,33 @@ list? (ack option)
        drop-down list of languages, the list you are on probably only
        supports one language.
 
-   If your list does not support the language you would prefer to use,
-   you may contact the list administrator (LISTNAME-owner@DOMAIN) to see
-   if it can be added, but remember that this may mean some work that the
-   list and/or site administrator(s) do not have time or the ability to
-   do.
+   If your list does not support the language you would prefer to use, you
+   may contact the list administrator (LISTNAME-owner@DOMAIN) to see if it
+   can be added, but remember that this may mean some work that the list
+   and/or site administrator(s) do not have time or the ability to do.
 
    If your language of choice is not available because no translation
    exists for Mailman, please consider volunteering your time as a
    translator. For more information you may want to consult the
    mailman-i18n mailing list at
-   http://mail.python.org/mailman/listinfo/mailman-i18n. (i18n is a
-   common short-hand for "internationalization" because the word starts
-   with an i, ends with an n, and has 18 letters in between. If you
-   mumble a bit, i18n even sounds a bit like "internationalization.")
+   http://mail.python.org/mailman/listinfo/mailman-i18n. (i18n is a common
+   short-hand for "internationalization" because the word starts with an
+   i, ends with an n, and has 18 letters in between. If you mumble a bit,
+   i18n even sounds a bit like "internationalization.")
 
 10.4 How do I avoid having my name appear on the subscribers list? (the hide
 option)
 
-   If you do not want to have your email address show up on the
-   subscriber list for any reason, you can opt to have it concealed.
+   If you do not want to have your email address show up on the subscriber
+   list for any reason, you can opt to have it concealed.
 
    Common reasons for doing this include avoiding unsolicited bulk email
    (spam). By default, the subscribers list is obscured to hinder spam
    harvesters, but if you feel this is insufficient it's easy enough to
    remove address from the subscriber list given in the information pages
-   or by email request. (Note that this does not conceal your address
-   from the list administrators.) You may wish to see Section 11.2 for
-   more information on what Mailman can do to help avoid spam.
+   or by email request. (Note that this does not conceal your address from
+   the list administrators.) You may wish to see Section 11.2 for more
+   information on what Mailman can do to help avoid spam.
 
    To change this setting using the web interface:
     1. Log in to your member options page. (See Section 3.1 for
@@ -1079,8 +1073,8 @@ option)
        your name to appear on the list.
 
    To change this setting using the email interface:
-    1. Send a mail to LISTNAME-request@DOMAIN with the command
-       set hide on or set hide off.
+    1. Send a mail to LISTNAME-request@DOMAIN with the command set hide on
+       or set hide off.
        Commands can appear in either the body or the subject of the
        message. (See Section 3.2 for more information about sending mail
        commands.)
@@ -1092,12 +1086,12 @@ option)
 11.1 How do I view the list archives?
 
    If the list has archives, they can be viewed by going to a web page
-   address. This address usually linked from the list information page
-   and can be found in the List-Archive: of every list message unless
-   your list administrator has disabled these headers. (Many mail
-   programs hide the List-Archive: mail header, so you may have to tell
-   your mail program to allow you to view full headers before you will be
-   able to see it.)
+   address. This address usually linked from the list information page and
+   can be found in the List-Archive: of every list message unless your
+   list administrator has disabled these headers. (Many mail programs hide
+   the List-Archive: mail header, so you may have to tell your mail
+   program to allow you to view full headers before you will be able to
+   see it.)
 
    Public archives usually have addresses of the form
    http://WEBSERVER/pipermail/LISTNAME/ and private archives usually have
@@ -1106,33 +1100,31 @@ option)
    See Section 3.1 for more information on finding the addresses of a
    list.
 
-11.2 What does Mailman do to help protect me from unsolicited bulk email
-(spam)?
+11.2 What does Mailman do to help protect me from unsolicited bulk email (spam)?
 
-   A technical list's archives may include answers to a range of
-   different questions. Often, the people who have posted these answers
-   would be happy to help someone who doesn't quite understand the
-   answer, and don't mind giving their address out for that purpose. But
-   although it would be wonderful if everyone could contact each other
-   easily, we also want to make sure that the list and list archives are
-   not abused by people who send spam.
+   A technical list's archives may include answers to a range of different
+   questions. Often, the people who have posted these answers would be
+   happy to help someone who doesn't quite understand the answer, and
+   don't mind giving their address out for that purpose. But although it
+   would be wonderful if everyone could contact each other easily, we also
+   want to make sure that the list and list archives are not abused by
+   people who send spam.
 
    To make a range of options available to list administrators, Mailman
    allows a variety of configurations to help protect email addresses.
    Many of these settings are optional to the list administrator, so your
    particular list may be set up in many ways. List administrators must
-   walk a fine line between protecting subscribers and making it
-   difficult for people to get in touch.
+   walk a fine line between protecting subscribers and making it difficult
+   for people to get in touch.
 
      * Subscriber lists
           + The list administrator can choose to have the subscriber list
             public, viewable only to list members, or viewable only to
             list administrators.
           + The subscriber list is shown with the addresses obscured to
-            make it difficult for spam harvesters to collect your
-            address.
-          + You can choose to have your address hidden from the
-            subscriber list. (See Section 10.4 for more information.)
+            make it difficult for spam harvesters to collect your address.
+          + You can choose to have your address hidden from the subscriber
+            list. (See Section 10.4 for more information.)
           + Note: The entire subscriber list is always available to the
             list administrators.
      * List archives
@@ -1151,8 +1143,8 @@ option)
      * Limited posting to the lists
           + The list administrator can choose who can post to the list.
             Most lists are either moderated (a moderator or administrator
-            reviews each posting), set so only subscribers may post to
-            the list, or allow anyone to post to the list.
+            reviews each posting), set so only subscribers may post to the
+            list, or allow anyone to post to the list.
           + By allowing only subscribers to post to a list, Mailman often
             blocks all spam and some viruses from being sent through the
             list. As such, this is a fairly common setting used by list
@@ -1168,7 +1160,7 @@ option)
    determined people, so be aware that the protections used may not be
    enough.
 
-                       1 Email commands quick reference
+                        1 Email commands quick reference
 
      * confirm $<$ CONFIRMATION-STRING $>$
           + Confirm an action. The confirmation-string is required and
@@ -1191,14 +1183,14 @@ option)
      * set ...
           + Set or view your membership options.
             Use `set help' (without the quotes) to get a more detailed
-            list of the options you can change. This list is also given
-            in Appendix B.
+            list of the options you can change. This list is also given in
+            Appendix B.
             Use `set show' (without the quotes) to view your current
             option settings.
      * subscribe [ $<$ PASSWORD $>$ ] [digest|nodigest] [address= $<$
        ADDRESS $>$ ]
-          + Subscribe to this mailing list. Your password must be given
-            to unsubscribe or change your options, but if you omit the
+          + Subscribe to this mailing list. Your password must be given to
+            unsubscribe or change your options, but if you omit the
             password, one will be generated for you. You may be
             periodically reminded of your password.
             The next argument may be either: `nodigest' or `digest' (no
@@ -1210,9 +1202,9 @@ option)
           + Unsubscribe from the mailing list. If given, your password
             must match your current password. If omitted, a confirmation
             email will be sent to the unsubscribing address. If you wish
-            to unsubscribe an address other than the address you sent
-            this request from, you may specify `address= $<$ ADDRESS $>$
-            ' (no brackets around the email address, and no quotes!)
+            to unsubscribe an address other than the address you sent this
+            request from, you may specify `address= $<$ ADDRESS $>$ ' (no
+            brackets around the email address, and no quotes!)
      * who [ $<$ PASSWORD $>$ ] [address= $<$ ADDRESS $>$ ]
           + See everyone who is on this mailing list. The roster is
             limited to list members only, and you must supply your
@@ -1221,7 +1213,7 @@ option)
             membership address with `address= $<$ ADDRESS $>$ ' (no
             brackets around the email address, and no quotes!)
 
-                       2 Member options quick reference
+                        2 Member options quick reference
 
      * set help
           + Show this detailed help.
@@ -1248,8 +1240,8 @@ option)
             postings immediately when they are posted. Use `set digest
             plain' if instead you want to receive postings bundled into a
             plain text digest (i.e. RFC 1153 digest). Use `set digest
-            mime' if instead you want to receive postings bundled
-            together into a MIME digest.
+            mime' if instead you want to receive postings bundled together
+            into a MIME digest.
      * set delivery on
        set delivery off
           + Turn delivery on or off. This does not unsubscribe you, but
@@ -1268,8 +1260,8 @@ option)
      * set duplicates on
        set duplicates off
           + Use `set duplicates off' if you want Mailman not to send you
-            messages if your address is explicitly mentioned in the To:
-            or Cc: fields of the message. This can reduce the number of
+            messages if your address is explicitly mentioned in the To: or
+            Cc: fields of the message. This can reduce the number of
             duplicate postings you will receive.
      * set reminders on
        set reminders off
@@ -1278,21 +1270,21 @@ option)
 
                             About this document ...
 
-   GNU Mailman - List Member Manual, May 15, 2012, Release 2.1
+   GNU Mailman - List Member Manual, July 14, 2013, Release 2.1
 
    This document was generated using the LaTeX2HTML translator.
 
-   LaTeX2HTML is Copyright © 1993, 1994, 1995, 1996, 1997, Nikos Drakos,
-   Computer Based Learning Unit, University of Leeds, and Copyright ©
+   LaTeX2HTML is Copyright © 1993, 1994, 1995, 1996, 1997, Nikos Drakos,
+   Computer Based Learning Unit, University of Leeds, and Copyright ©
    1997, 1998, Ross Moore, Mathematics Department, Macquarie University,
    Sydney.
 
    The application of LaTeX2HTML to the Python documentation has been
    heavily tailored by Fred L. Drake, Jr. Original navigation icons were
    contributed by Christopher Petrilli.
-     _________________________________________________________________
+     __________________________________________________________________
 
-   Previous Page Up one Level Next Page GNU Mailman - List Member Manual
-     _________________________________________________________________
+    Previous Page Up one Level Next Page GNU Mailman - List Member Manual
+     __________________________________________________________________
 
-   Release 2.1, documentation updated on May 15, 2012.
+   Release 2.1, documentation updated on July 14, 2013.