From 98e2821b38a775737e42a2479a6bc65107210859 Mon Sep 17 00:00:00 2001 From: Elliot Kroo Date: Thu, 11 Mar 2010 15:21:30 -0800 Subject: reorganizing the first level of folders (trunk/branch folders are not the git way :) --- .../src/org/mozilla/javascript/Context.java | 2526 ++++++++++++++++++++ 1 file changed, 2526 insertions(+) create mode 100644 infrastructure/rhino1_7R1/src/org/mozilla/javascript/Context.java (limited to 'infrastructure/rhino1_7R1/src/org/mozilla/javascript/Context.java') diff --git a/infrastructure/rhino1_7R1/src/org/mozilla/javascript/Context.java b/infrastructure/rhino1_7R1/src/org/mozilla/javascript/Context.java new file mode 100644 index 0000000..0833883 --- /dev/null +++ b/infrastructure/rhino1_7R1/src/org/mozilla/javascript/Context.java @@ -0,0 +1,2526 @@ +/* -*- Mode: java; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- + * + * ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is Rhino code, released + * May 6, 1999. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1997-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * Bob Jervis + * + * Alternatively, the contents of this file may be used under the terms of + * the GNU General Public License Version 2 or later (the "GPL"), in which + * case the provisions of the GPL are applicable instead of those above. If + * you wish to allow use of your version of this file only under the terms of + * the GPL and not to allow others to use your version of this file under the + * MPL, indicate your decision by deleting the provisions above and replacing + * them with the notice and other provisions required by the GPL. If you do + * not delete the provisions above, a recipient may use your version of this + * file under either the MPL or the GPL. + * + * ***** END LICENSE BLOCK ***** */ + +// API class + +package org.mozilla.javascript; + +import java.beans.PropertyChangeEvent; +import java.beans.PropertyChangeListener; +import java.io.CharArrayWriter; +import java.io.IOException; +import java.io.PrintWriter; +import java.io.Reader; +import java.io.StringWriter; +import java.io.Writer; +import java.lang.reflect.InvocationTargetException; +import java.lang.reflect.Method; +import java.util.Hashtable; +import java.util.Locale; + +import org.mozilla.javascript.debug.DebuggableScript; +import org.mozilla.javascript.debug.Debugger; +import org.mozilla.javascript.xml.XMLLib; + +/** + * This class represents the runtime context of an executing script. + * + * Before executing a script, an instance of Context must be created + * and associated with the thread that will be executing the script. + * The Context will be used to store information about the executing + * of the script such as the call stack. Contexts are associated with + * the current thread using the {@link #call(ContextAction)} + * or {@link #enter()} methods.

+ * + * Different forms of script execution are supported. Scripts may be + * evaluated from the source directly, or first compiled and then later + * executed. Interactive execution is also supported.

+ * + * Some aspects of script execution, such as type conversions and + * object creation, may be accessed directly through methods of + * Context. + * + * @see Scriptable + * @author Norris Boyd + * @author Brendan Eich + */ + +public class Context +{ + /** + * Language versions. + * + * All integral values are reserved for future version numbers. + */ + + /** + * The unknown version. + */ + public static final int VERSION_UNKNOWN = -1; + + /** + * The default version. + */ + public static final int VERSION_DEFAULT = 0; + + /** + * JavaScript 1.0 + */ + public static final int VERSION_1_0 = 100; + + /** + * JavaScript 1.1 + */ + public static final int VERSION_1_1 = 110; + + /** + * JavaScript 1.2 + */ + public static final int VERSION_1_2 = 120; + + /** + * JavaScript 1.3 + */ + public static final int VERSION_1_3 = 130; + + /** + * JavaScript 1.4 + */ + public static final int VERSION_1_4 = 140; + + /** + * JavaScript 1.5 + */ + public static final int VERSION_1_5 = 150; + + /** + * JavaScript 1.6 + */ + public static final int VERSION_1_6 = 160; + + /** + * JavaScript 1.7 + */ + public static final int VERSION_1_7 = 170; + + /** + * Controls behaviour of Date.prototype.getYear(). + * If hasFeature(FEATURE_NON_ECMA_GET_YEAR) returns true, + * Date.prototype.getYear subtructs 1900 only if 1900 <= date < 2000. + * The default behavior of {@link #hasFeature(int)} is always to subtruct + * 1900 as rquired by ECMAScript B.2.4. + */ + public static final int FEATURE_NON_ECMA_GET_YEAR = 1; + + /** + * Control if member expression as function name extension is available. + * If hasFeature(FEATURE_MEMBER_EXPR_AS_FUNCTION_NAME) returns + * true, allow function memberExpression(args) { body } to be + * syntax sugar for memberExpression = function(args) { body }, + * when memberExpression is not a simple identifier. + * See ECMAScript-262, section 11.2 for definition of memberExpression. + * By default {@link #hasFeature(int)} returns false. + */ + public static final int FEATURE_MEMBER_EXPR_AS_FUNCTION_NAME = 2; + + /** + * Control if reserved keywords are treated as identifiers. + * If hasFeature(RESERVED_KEYWORD_AS_IDENTIFIER) returns true, + * treat future reserved keyword (see Ecma-262, section 7.5.3) as ordinary + * identifiers but warn about this usage. + * + * By default {@link #hasFeature(int)} returns false. + */ + public static final int FEATURE_RESERVED_KEYWORD_AS_IDENTIFIER = 3; + + /** + * Control if toString() should returns the same result + * as toSource() when applied to objects and arrays. + * If hasFeature(FEATURE_TO_STRING_AS_SOURCE) returns true, + * calling toString() on JS objects gives the same result as + * calling toSource(). That is it returns JS source with code + * to create an object with all enumeratable fields of the original object + * instead of printing [object result of + * {@link Scriptable#getClassName()}]. + *

+ * By default {@link #hasFeature(int)} returns true only if + * the current JS version is set to {@link #VERSION_1_2}. + */ + public static final int FEATURE_TO_STRING_AS_SOURCE = 4; + + /** + * Control if properties __proto__ and __parent__ + * are treated specially. + * If hasFeature(FEATURE_PARENT_PROTO_PROPERTIES) returns true, + * treat __parent__ and __proto__ as special properties. + *

+ * The properties allow to query and set scope and prototype chains for the + * objects. The special meaning of the properties is available + * only when they are used as the right hand side of the dot operator. + * For example, while x.__proto__ = y changes the prototype + * chain of the object x to point to y, + * x["__proto__"] = y simply assigns a new value to the property + * __proto__ in x even when the feature is on. + * + * By default {@link #hasFeature(int)} returns true. + */ + public static final int FEATURE_PARENT_PROTO_PROPERTIES = 5; + + /** + * @deprecated In previous releases, this name was given to + * FEATURE_PARENT_PROTO_PROPERTIES. + */ + public static final int FEATURE_PARENT_PROTO_PROPRTIES = 5; + + /** + * Control if support for E4X(ECMAScript for XML) extension is available. + * If hasFeature(FEATURE_E4X) returns true, the XML syntax is available. + *

+ * By default {@link #hasFeature(int)} returns true if + * the current JS version is set to {@link #VERSION_DEFAULT} + * or is at least {@link #VERSION_1_6}. + * @since 1.6 Release 1 + */ + public static final int FEATURE_E4X = 6; + + /** + * Control if dynamic scope should be used for name access. + * If hasFeature(FEATURE_DYNAMIC_SCOPE) returns true, then the name lookup + * during name resolution will use the top scope of the script or function + * which is at the top of JS execution stack instead of the top scope of the + * script or function from the current stack frame if the top scope of + * the top stack frame contains the top scope of the current stack frame + * on its prototype chain. + *

+ * This is useful to define shared scope containing functions that can + * be called from scripts and functions using private scopes. + *

+ * By default {@link #hasFeature(int)} returns false. + * @since 1.6 Release 1 + */ + public static final int FEATURE_DYNAMIC_SCOPE = 7; + + /** + * Control if strict variable mode is enabled. + * When the feature is on Rhino reports runtime errors if assignment + * to a global variable that does not exist is executed. When the feature + * is off such assignments creates new variable in the global scope as + * required by ECMA 262. + *

+ * By default {@link #hasFeature(int)} returns false. + * @since 1.6 Release 1 + */ + public static final int FEATURE_STRICT_VARS = 8; + + /** + * Control if strict eval mode is enabled. + * When the feature is on Rhino reports runtime errors if non-string + * argument is passed to the eval function. When the feature is off + * eval simply return non-string argument as is without performing any + * evaluation as required by ECMA 262. + *

+ * By default {@link #hasFeature(int)} returns false. + * @since 1.6 Release 1 + */ + public static final int FEATURE_STRICT_EVAL = 9; + + /** + * When the feature is on Rhino will add a "fileName" and "lineNumber" + * properties to Error objects automatically. When the feature is off, you + * have to explicitly pass them as the second and third argument to the + * Error constructor. Note that neither behaviour is fully ECMA 262 + * compliant (as 262 doesn't specify a three-arg constructor), but keeping + * the feature off results in Error objects that don't have + * additional non-ECMA properties when constructed using the ECMA-defined + * single-arg constructor and is thus desirable if a stricter ECMA + * compliance is desired, specifically adherence to the point 15.11.5. of + * the standard. + *

+ * By default {@link #hasFeature(int)} returns false. + * @since 1.6 Release 6 + */ + public static final int FEATURE_LOCATION_INFORMATION_IN_ERROR = 10; + + /** + * Controls whether JS 1.5 'strict mode' is enabled. + * When the feature is on, Rhino reports more than a dozen different + * warnings. When the feature is off, these warnings are not generated. + * FEATURE_STRICT_MODE implies FEATURE_STRICT_VARS and FEATURE_STRICT_EVAL. + *

+ * By default {@link #hasFeature(int)} returns false. + * @since 1.6 Release 6 + */ + public static final int FEATURE_STRICT_MODE = 11; + + /** + * Controls whether a warning should be treated as an error. + * @since 1.6 Release 6 + */ + public static final int FEATURE_WARNING_AS_ERROR = 12; + + /** + * Enables enhanced access to Java. + * Specifically, controls whether private and protected members can be + * accessed, and whether scripts can catch all Java exceptions. + *

+ * Note that this feature should only be enabled for trusted scripts. + *

+ * By default {@link #hasFeature(int)} returns false. + * @since 1.7 Release 1 + */ + public static final int FEATURE_ENHANCED_JAVA_ACCESS = 13; + + + public static final String languageVersionProperty = "language version"; + public static final String errorReporterProperty = "error reporter"; + + /** + * Convenient value to use as zero-length array of objects. + */ + public static final Object[] emptyArgs = ScriptRuntime.emptyArgs; + + /** + * Create a new Context. + * + * Note that the Context must be associated with a thread before + * it can be used to execute a script. + * @deprecated use {@link ContextFactory#enter()} or + * {@link ContextFactory#call(ContextAction)} instead. + */ + public Context() + { + this(ContextFactory.getGlobal()); + } + + Context(ContextFactory factory) + { + assert factory != null; + this.factory = factory; + setLanguageVersion(VERSION_DEFAULT); + optimizationLevel = codegenClass != null ? 0 : -1; + maximumInterpreterStackDepth = Integer.MAX_VALUE; + } + + /** + * Get the current Context. + * + * The current Context is per-thread; this method looks up + * the Context associated with the current thread.

+ * + * @return the Context associated with the current thread, or + * null if no context is associated with the current + * thread. + * @see ContextFactory#enterContext() + * @see ContextFactory#call(ContextAction) + */ + public static Context getCurrentContext() + { + Object helper = VMBridge.instance.getThreadContextHelper(); + return VMBridge.instance.getContext(helper); + } + + /** + * Same as calling {@link ContextFactory#enterContext()} on the global + * ContextFactory instance. + * @deprecated use {@link ContextFactory#enter()} or + * {@link ContextFactory#call(ContextAction)} instead as this method relies + * on usage of a static singleton "global" ContextFactory. + * @return a Context associated with the current thread + * @see #getCurrentContext() + * @see #exit() + * @see #call(ContextAction) + */ + public static Context enter() + { + return enter(null); + } + + /** + * Get a Context associated with the current thread, using + * the given Context if need be. + *

+ * The same as enter() except that cx + * is associated with the current thread and returned if + * the current thread has no associated context and cx + * is not associated with any other thread. + * @param cx a Context to associate with the thread if possible + * @return a Context associated with the current thread + * @deprecated use {@link ContextFactory#enterContext(Context)} instead as + * this method relies on usage of a static singleton "global" ContextFactory. + * @see ContextFactory#enterContext(Context) + * @see ContextFactory#call(ContextAction) + */ + public static Context enter(Context cx) + { + return enter(cx, ContextFactory.getGlobal()); + } + + static final Context enter(Context cx, ContextFactory factory) + { + Object helper = VMBridge.instance.getThreadContextHelper(); + Context old = VMBridge.instance.getContext(helper); + if (old != null) { + cx = old; + } else { + if (cx == null) { + cx = factory.makeContext(); + if (cx.enterCount != 0) { + throw new IllegalStateException("factory.makeContext() returned Context instance already associated with some thread"); + } + factory.onContextCreated(cx); + if (factory.isSealed() && !cx.isSealed()) { + cx.seal(null); + } + } else { + if (cx.enterCount != 0) { + throw new IllegalStateException("can not use Context instance already associated with some thread"); + } + } + VMBridge.instance.setContext(helper, cx); + } + ++cx.enterCount; + return cx; + } + + /** + * Exit a block of code requiring a Context. + * + * Calling exit() will remove the association between + * the current thread and a Context if the prior call to + * {@link ContextFactory#enterContext()} on this thread newly associated a + * Context with this thread. Once the current thread no longer has an + * associated Context, it cannot be used to execute JavaScript until it is + * again associated with a Context. + * @see ContextFactory#enterContext() + */ + public static void exit() + { + Object helper = VMBridge.instance.getThreadContextHelper(); + Context cx = VMBridge.instance.getContext(helper); + if (cx == null) { + throw new IllegalStateException( + "Calling Context.exit without previous Context.enter"); + } + if (cx.enterCount < 1) Kit.codeBug(); + if (--cx.enterCount == 0) { + VMBridge.instance.setContext(helper, null); + cx.factory.onContextReleased(cx); + } + } + + /** + * Call {@link ContextAction#run(Context cx)} + * using the Context instance associated with the current thread. + * If no Context is associated with the thread, then + * ContextFactory.getGlobal().makeContext() will be called to + * construct new Context instance. The instance will be temporary + * associated with the thread during call to + * {@link ContextAction#run(Context)}. + * @deprecated use {@link ContextFactory#call(ContextAction)} instead as + * this method relies on usage of a static singleton "global" + * ContextFactory. + * @return The result of {@link ContextAction#run(Context)}. + */ + public static Object call(ContextAction action) + { + return call(ContextFactory.getGlobal(), action); + } + + /** + * Call {@link + * Callable#call(Context cx, Scriptable scope, Scriptable thisObj, + * Object[] args)} + * using the Context instance associated with the current thread. + * If no Context is associated with the thread, then + * {@link ContextFactory#makeContext()} will be called to construct + * new Context instance. The instance will be temporary associated + * with the thread during call to {@link ContextAction#run(Context)}. + *

+ * It is allowed but not advisable to use null for factory + * argument in which case the global static singleton ContextFactory + * instance will be used to create new context instances. + * @see ContextFactory#call(ContextAction) + */ + public static Object call(ContextFactory factory, final Callable callable, + final Scriptable scope, final Scriptable thisObj, + final Object[] args) + { + if(factory == null) { + factory = ContextFactory.getGlobal(); + } + return call(factory, new ContextAction() { + public Object run(Context cx) { + return callable.call(cx, scope, thisObj, args); + } + }); + } + + /** + * The method implements {@links ContextFactory#call(ContextAction)} logic. + */ + static Object call(ContextFactory factory, ContextAction action) { + Context cx = enter(null, factory); + try { + return action.run(cx); + } + finally { + exit(); + } + } + + /** + * @deprecated + * @see ContextFactory#addListener(ContextFactory.Listener) + * @see ContextFactory#getGlobal() + */ + public static void addContextListener(ContextListener listener) + { + // Special workaround for the debugger + String DBG = "org.mozilla.javascript.tools.debugger.Main"; + if (DBG.equals(listener.getClass().getName())) { + Class cl = listener.getClass(); + Class factoryClass = Kit.classOrNull( + "org.mozilla.javascript.ContextFactory"); + Class[] sig = { factoryClass }; + Object[] args = { ContextFactory.getGlobal() }; + try { + Method m = cl.getMethod("attachTo", sig); + m.invoke(listener, args); + } catch (Exception ex) { + RuntimeException rex = new RuntimeException(); + Kit.initCause(rex, ex); + throw rex; + } + return; + } + + ContextFactory.getGlobal().addListener(listener); + } + + /** + * @deprecated + * @see ContextFactory#removeListener(ContextFactory.Listener) + * @see ContextFactory#getGlobal() + */ + public static void removeContextListener(ContextListener listener) + { + ContextFactory.getGlobal().addListener(listener); + } + + /** + * Return {@link ContextFactory} instance used to create this Context. + */ + public final ContextFactory getFactory() + { + return factory; + } + + /** + * Checks if this is a sealed Context. A sealed Context instance does not + * allow to modify any of its properties and will throw an exception + * on any such attempt. + * @see #seal(Object sealKey) + */ + public final boolean isSealed() + { + return sealed; + } + + /** + * Seal this Context object so any attempt to modify any of its properties + * including calling {@link #enter()} and {@link #exit()} methods will + * throw an exception. + *

+ * If sealKey is not null, calling + * {@link #unseal(Object sealKey)} with the same key unseals + * the object. If sealKey is null, unsealing is no longer possible. + * + * @see #isSealed() + * @see #unseal(Object) + */ + public final void seal(Object sealKey) + { + if (sealed) onSealedMutation(); + sealed = true; + this.sealKey = sealKey; + } + + /** + * Unseal previously sealed Context object. + * The sealKey argument should not be null and should match + * sealKey suplied with the last call to + * {@link #seal(Object)} or an exception will be thrown. + * + * @see #isSealed() + * @see #seal(Object sealKey) + */ + public final void unseal(Object sealKey) + { + if (sealKey == null) throw new IllegalArgumentException(); + if (this.sealKey != sealKey) throw new IllegalArgumentException(); + if (!sealed) throw new IllegalStateException(); + sealed = false; + this.sealKey = null; + } + + static void onSealedMutation() + { + throw new IllegalStateException(); + } + + /** + * Get the current language version. + *

+ * The language version number affects JavaScript semantics as detailed + * in the overview documentation. + * + * @return an integer that is one of VERSION_1_0, VERSION_1_1, etc. + */ + public final int getLanguageVersion() + { + return version; + } + + /** + * Set the language version. + * + *

+ * Setting the language version will affect functions and scripts compiled + * subsequently. See the overview documentation for version-specific + * behavior. + * + * @param version the version as specified by VERSION_1_0, VERSION_1_1, etc. + */ + public void setLanguageVersion(int version) + { + if (sealed) onSealedMutation(); + checkLanguageVersion(version); + Object listeners = propertyListeners; + if (listeners != null && version != this.version) { + firePropertyChangeImpl(listeners, languageVersionProperty, + new Integer(this.version), + new Integer(version)); + } + this.version = version; + } + + public static boolean isValidLanguageVersion(int version) + { + switch (version) { + case VERSION_DEFAULT: + case VERSION_1_0: + case VERSION_1_1: + case VERSION_1_2: + case VERSION_1_3: + case VERSION_1_4: + case VERSION_1_5: + case VERSION_1_6: + case VERSION_1_7: + return true; + } + return false; + } + + public static void checkLanguageVersion(int version) + { + if (isValidLanguageVersion(version)) { + return; + } + throw new IllegalArgumentException("Bad language version: "+version); + } + + /** + * Get the implementation version. + * + *

+ * The implementation version is of the form + *

+     *    "name langVer release relNum date"
+     * 
+ * where name is the name of the product, langVer is + * the language version, relNum is the release number, and + * date is the release date for that specific + * release in the form "yyyy mm dd". + * + * @return a string that encodes the product, language version, release + * number, and date. + */ + public final String getImplementationVersion() + { + // XXX Probably it would be better to embed this directly into source + // with special build preprocessing but that would require some ant + // tweaking and then replacing token in resource files was simpler + if (implementationVersion == null) { + implementationVersion + = ScriptRuntime.getMessage0("implementation.version"); + } + return implementationVersion; + } + + /** + * Get the current error reporter. + * + * @see org.mozilla.javascript.ErrorReporter + */ + public final ErrorReporter getErrorReporter() + { + if (errorReporter == null) { + return DefaultErrorReporter.instance; + } + return errorReporter; + } + + /** + * Change the current error reporter. + * + * @return the previous error reporter + * @see org.mozilla.javascript.ErrorReporter + */ + public final ErrorReporter setErrorReporter(ErrorReporter reporter) + { + if (sealed) onSealedMutation(); + if (reporter == null) throw new IllegalArgumentException(); + ErrorReporter old = getErrorReporter(); + if (reporter == old) { + return old; + } + Object listeners = propertyListeners; + if (listeners != null) { + firePropertyChangeImpl(listeners, errorReporterProperty, + old, reporter); + } + this.errorReporter = reporter; + return old; + } + + /** + * Get the current locale. Returns the default locale if none has + * been set. + * + * @see java.util.Locale + */ + + public final Locale getLocale() + { + if (locale == null) + locale = Locale.getDefault(); + return locale; + } + + /** + * Set the current locale. + * + * @see java.util.Locale + */ + public final Locale setLocale(Locale loc) + { + if (sealed) onSealedMutation(); + Locale result = locale; + locale = loc; + return result; + } + + /** + * Register an object to receive notifications when a bound property + * has changed + * @see java.beans.PropertyChangeEvent + * @see #removePropertyChangeListener(java.beans.PropertyChangeListener) + * @param l the listener + */ + public final void addPropertyChangeListener(PropertyChangeListener l) + { + if (sealed) onSealedMutation(); + propertyListeners = Kit.addListener(propertyListeners, l); + } + + /** + * Remove an object from the list of objects registered to receive + * notification of changes to a bounded property + * @see java.beans.PropertyChangeEvent + * @see #addPropertyChangeListener(java.beans.PropertyChangeListener) + * @param l the listener + */ + public final void removePropertyChangeListener(PropertyChangeListener l) + { + if (sealed) onSealedMutation(); + propertyListeners = Kit.removeListener(propertyListeners, l); + } + + /** + * Notify any registered listeners that a bounded property has changed + * @see #addPropertyChangeListener(java.beans.PropertyChangeListener) + * @see #removePropertyChangeListener(java.beans.PropertyChangeListener) + * @see java.beans.PropertyChangeListener + * @see java.beans.PropertyChangeEvent + * @param property the bound property + * @param oldValue the old value + * @param newValue the new value + */ + final void firePropertyChange(String property, Object oldValue, + Object newValue) + { + Object listeners = propertyListeners; + if (listeners != null) { + firePropertyChangeImpl(listeners, property, oldValue, newValue); + } + } + + private void firePropertyChangeImpl(Object listeners, String property, + Object oldValue, Object newValue) + { + for (int i = 0; ; ++i) { + Object l = Kit.getListener(listeners, i); + if (l == null) + break; + if (l instanceof PropertyChangeListener) { + PropertyChangeListener pcl = (PropertyChangeListener)l; + pcl.propertyChange(new PropertyChangeEvent( + this, property, oldValue, newValue)); + } + } + } + + /** + * Report a warning using the error reporter for the current thread. + * + * @param message the warning message to report + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number + * @param lineSource the text of the line (may be null) + * @param lineOffset the offset into lineSource where problem was detected + * @see org.mozilla.javascript.ErrorReporter + */ + public static void reportWarning(String message, String sourceName, + int lineno, String lineSource, + int lineOffset) + { + Context cx = Context.getContext(); + if (cx.hasFeature(FEATURE_WARNING_AS_ERROR)) + reportError(message, sourceName, lineno, lineSource, lineOffset); + else + cx.getErrorReporter().warning(message, sourceName, lineno, + lineSource, lineOffset); + } + + /** + * Report a warning using the error reporter for the current thread. + * + * @param message the warning message to report + * @see org.mozilla.javascript.ErrorReporter + */ + public static void reportWarning(String message) + { + int[] linep = { 0 }; + String filename = getSourcePositionFromStack(linep); + Context.reportWarning(message, filename, linep[0], null, 0); + } + + public static void reportWarning(String message, Throwable t) + { + int[] linep = { 0 }; + String filename = getSourcePositionFromStack(linep); + Writer sw = new StringWriter(); + PrintWriter pw = new PrintWriter(sw); + pw.println(message); + t.printStackTrace(pw); + pw.flush(); + Context.reportWarning(sw.toString(), filename, linep[0], null, 0); + } + + /** + * Report an error using the error reporter for the current thread. + * + * @param message the error message to report + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number + * @param lineSource the text of the line (may be null) + * @param lineOffset the offset into lineSource where problem was detected + * @see org.mozilla.javascript.ErrorReporter + */ + public static void reportError(String message, String sourceName, + int lineno, String lineSource, + int lineOffset) + { + Context cx = getCurrentContext(); + if (cx != null) { + cx.getErrorReporter().error(message, sourceName, lineno, + lineSource, lineOffset); + } else { + throw new EvaluatorException(message, sourceName, lineno, + lineSource, lineOffset); + } + } + + /** + * Report an error using the error reporter for the current thread. + * + * @param message the error message to report + * @see org.mozilla.javascript.ErrorReporter + */ + public static void reportError(String message) + { + int[] linep = { 0 }; + String filename = getSourcePositionFromStack(linep); + Context.reportError(message, filename, linep[0], null, 0); + } + + /** + * Report a runtime error using the error reporter for the current thread. + * + * @param message the error message to report + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number + * @param lineSource the text of the line (may be null) + * @param lineOffset the offset into lineSource where problem was detected + * @return a runtime exception that will be thrown to terminate the + * execution of the script + * @see org.mozilla.javascript.ErrorReporter + */ + public static EvaluatorException reportRuntimeError(String message, + String sourceName, + int lineno, + String lineSource, + int lineOffset) + { + Context cx = getCurrentContext(); + if (cx != null) { + return cx.getErrorReporter(). + runtimeError(message, sourceName, lineno, + lineSource, lineOffset); + } else { + throw new EvaluatorException(message, sourceName, lineno, + lineSource, lineOffset); + } + } + + static EvaluatorException reportRuntimeError0(String messageId) + { + String msg = ScriptRuntime.getMessage0(messageId); + return reportRuntimeError(msg); + } + + static EvaluatorException reportRuntimeError1(String messageId, + Object arg1) + { + String msg = ScriptRuntime.getMessage1(messageId, arg1); + return reportRuntimeError(msg); + } + + static EvaluatorException reportRuntimeError2(String messageId, + Object arg1, Object arg2) + { + String msg = ScriptRuntime.getMessage2(messageId, arg1, arg2); + return reportRuntimeError(msg); + } + + static EvaluatorException reportRuntimeError3(String messageId, + Object arg1, Object arg2, + Object arg3) + { + String msg = ScriptRuntime.getMessage3(messageId, arg1, arg2, arg3); + return reportRuntimeError(msg); + } + + static EvaluatorException reportRuntimeError4(String messageId, + Object arg1, Object arg2, + Object arg3, Object arg4) + { + String msg + = ScriptRuntime.getMessage4(messageId, arg1, arg2, arg3, arg4); + return reportRuntimeError(msg); + } + + /** + * Report a runtime error using the error reporter for the current thread. + * + * @param message the error message to report + * @see org.mozilla.javascript.ErrorReporter + */ + public static EvaluatorException reportRuntimeError(String message) + { + int[] linep = { 0 }; + String filename = getSourcePositionFromStack(linep); + return Context.reportRuntimeError(message, filename, linep[0], null, 0); + } + + /** + * Initialize the standard objects. + * + * Creates instances of the standard objects and their constructors + * (Object, String, Number, Date, etc.), setting up 'scope' to act + * as a global object as in ECMA 15.1.

+ * + * This method must be called to initialize a scope before scripts + * can be evaluated in that scope.

+ * + * This method does not affect the Context it is called upon. + * + * @return the initialized scope + */ + public final ScriptableObject initStandardObjects() + { + return initStandardObjects(null, false); + } + + /** + * Initialize the standard objects. + * + * Creates instances of the standard objects and their constructors + * (Object, String, Number, Date, etc.), setting up 'scope' to act + * as a global object as in ECMA 15.1.

+ * + * This method must be called to initialize a scope before scripts + * can be evaluated in that scope.

+ * + * This method does not affect the Context it is called upon. + * + * @param scope the scope to initialize, or null, in which case a new + * object will be created to serve as the scope + * @return the initialized scope. The method returns the value of the scope + * argument if it is not null or newly allocated scope object which + * is an instance {@link ScriptableObject}. + */ + public final Scriptable initStandardObjects(ScriptableObject scope) + { + return initStandardObjects(scope, false); + } + + /** + * Initialize the standard objects. + * + * Creates instances of the standard objects and their constructors + * (Object, String, Number, Date, etc.), setting up 'scope' to act + * as a global object as in ECMA 15.1.

+ * + * This method must be called to initialize a scope before scripts + * can be evaluated in that scope.

+ * + * This method does not affect the Context it is called upon.

+ * + * This form of the method also allows for creating "sealed" standard + * objects. An object that is sealed cannot have properties added, changed, + * or removed. This is useful to create a "superglobal" that can be shared + * among several top-level objects. Note that sealing is not allowed in + * the current ECMA/ISO language specification, but is likely for + * the next version. + * + * @param scope the scope to initialize, or null, in which case a new + * object will be created to serve as the scope + * @param sealed whether or not to create sealed standard objects that + * cannot be modified. + * @return the initialized scope. The method returns the value of the scope + * argument if it is not null or newly allocated scope object. + * @since 1.4R3 + */ + public ScriptableObject initStandardObjects(ScriptableObject scope, + boolean sealed) + { + return ScriptRuntime.initStandardObjects(this, scope, sealed); + } + + /** + * Get the singleton object that represents the JavaScript Undefined value. + */ + public static Object getUndefinedValue() + { + return Undefined.instance; + } + + /** + * Evaluate a JavaScript source string. + * + * The provided source name and line number are used for error messages + * and for producing debug information. + * + * @param scope the scope to execute in + * @param source the JavaScript source + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number + * @param securityDomain an arbitrary object that specifies security + * information about the origin or owner of the script. For + * implementations that don't care about security, this value + * may be null. + * @return the result of evaluating the string + * @see org.mozilla.javascript.SecurityController + */ + public final Object evaluateString(Scriptable scope, String source, + String sourceName, int lineno, + Object securityDomain) + { + Script script = compileString(source, sourceName, lineno, + securityDomain); + if (script != null) { + return script.exec(this, scope); + } else { + return null; + } + } + + /** + * Evaluate a reader as JavaScript source. + * + * All characters of the reader are consumed. + * + * @param scope the scope to execute in + * @param in the Reader to get JavaScript source from + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number + * @param securityDomain an arbitrary object that specifies security + * information about the origin or owner of the script. For + * implementations that don't care about security, this value + * may be null. + * @return the result of evaluating the source + * + * @exception IOException if an IOException was generated by the Reader + */ + public final Object evaluateReader(Scriptable scope, Reader in, + String sourceName, int lineno, + Object securityDomain) + throws IOException + { + Script script = compileReader(scope, in, sourceName, lineno, + securityDomain); + if (script != null) { + return script.exec(this, scope); + } else { + return null; + } + } + + /** + * Check whether a string is ready to be compiled. + *

+ * stringIsCompilableUnit is intended to support interactive compilation of + * javascript. If compiling the string would result in an error + * that might be fixed by appending more source, this method + * returns false. In every other case, it returns true. + *

+ * Interactive shells may accumulate source lines, using this + * method after each new line is appended to check whether the + * statement being entered is complete. + * + * @param source the source buffer to check + * @return whether the source is ready for compilation + * @since 1.4 Release 2 + */ + public final boolean stringIsCompilableUnit(String source) + { + boolean errorseen = false; + CompilerEnvirons compilerEnv = new CompilerEnvirons(); + compilerEnv.initFromContext(this); + // no source name or source text manager, because we're just + // going to throw away the result. + compilerEnv.setGeneratingSource(false); + /*APPJET*/ + Parser p = InformativeParser.makeParser(compilerEnv, + DefaultErrorReporter.instance); + try { + p.parse(source, null, 1); + } catch (EvaluatorException ee) { + errorseen = true; + } + // Return false only if an error occurred as a result of reading past + // the end of the file, i.e. if the source could be fixed by + // appending more source. + if (errorseen && p.eof()) + return false; + else + return true; + } + + /** + * @deprecated + * @see #compileReader(Reader in, String sourceName, int lineno, + * Object securityDomain) + */ + public final Script compileReader(Scriptable scope, Reader in, + String sourceName, int lineno, + Object securityDomain) + throws IOException + { + return compileReader(in, sourceName, lineno, securityDomain); + } + + /** + * Compiles the source in the given reader. + *

+ * Returns a script that may later be executed. + * Will consume all the source in the reader. + * + * @param in the input reader + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number for reporting errors + * @param securityDomain an arbitrary object that specifies security + * information about the origin or owner of the script. For + * implementations that don't care about security, this value + * may be null. + * @return a script that may later be executed + * @exception IOException if an IOException was generated by the Reader + * @see org.mozilla.javascript.Script + */ + public final Script compileReader(Reader in, String sourceName, + int lineno, Object securityDomain) + throws IOException + { + if (lineno < 0) { + // For compatibility IllegalArgumentException can not be thrown here + lineno = 0; + } + return (Script) compileImpl(null, in, null, sourceName, lineno, + securityDomain, false, null, null); + } + + /** + * Compiles the source in the given string. + *

+ * Returns a script that may later be executed. + * + * @param source the source string + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number for reporting errors + * @param securityDomain an arbitrary object that specifies security + * information about the origin or owner of the script. For + * implementations that don't care about security, this value + * may be null. + * @return a script that may later be executed + * @see org.mozilla.javascript.Script + */ + public final Script compileString(String source, + String sourceName, int lineno, + Object securityDomain) + { + if (lineno < 0) { + // For compatibility IllegalArgumentException can not be thrown here + lineno = 0; + } + return compileString(source, null, null, sourceName, lineno, + securityDomain); + } + + final Script compileString(String source, + Evaluator compiler, + ErrorReporter compilationErrorReporter, + String sourceName, int lineno, + Object securityDomain) + { + try { + return (Script) compileImpl(null, null, source, sourceName, lineno, + securityDomain, false, + compiler, compilationErrorReporter); + } catch (IOException ex) { + // Should not happen when dealing with source as string + throw new RuntimeException(); + } + } + + /** + * Compile a JavaScript function. + *

+ * The function source must be a function definition as defined by + * ECMA (e.g., "function f(a) { return a; }"). + * + * @param scope the scope to compile relative to + * @param source the function definition source + * @param sourceName a string describing the source, such as a filename + * @param lineno the starting line number + * @param securityDomain an arbitrary object that specifies security + * information about the origin or owner of the script. For + * implementations that don't care about security, this value + * may be null. + * @return a Function that may later be called + * @see org.mozilla.javascript.Function + */ + public final Function compileFunction(Scriptable scope, String source, + String sourceName, int lineno, + Object securityDomain) + { + return compileFunction(scope, source, null, null, sourceName, lineno, + securityDomain); + } + + final Function compileFunction(Scriptable scope, String source, + Evaluator compiler, + ErrorReporter compilationErrorReporter, + String sourceName, int lineno, + Object securityDomain) + { + try { + return (Function) compileImpl(scope, null, source, sourceName, + lineno, securityDomain, true, + compiler, compilationErrorReporter); + } + catch (IOException ioe) { + // Should never happen because we just made the reader + // from a String + throw new RuntimeException(); + } + } + + /** + * Decompile the script. + *

+ * The canonical source of the script is returned. + * + * @param script the script to decompile + * @param indent the number of spaces to indent the result + * @return a string representing the script source + */ + public final String decompileScript(Script script, int indent) + { + NativeFunction scriptImpl = (NativeFunction) script; + return scriptImpl.decompile(indent, 0); + } + + /** + * Decompile a JavaScript Function. + *

+ * Decompiles a previously compiled JavaScript function object to + * canonical source. + *

+ * Returns function body of '[native code]' if no decompilation + * information is available. + * + * @param fun the JavaScript function to decompile + * @param indent the number of spaces to indent the result + * @return a string representing the function source + */ + public final String decompileFunction(Function fun, int indent) + { + if (fun instanceof BaseFunction) + return ((BaseFunction)fun).decompile(indent, 0); + else + return "function " + fun.getClassName() + + "() {\n\t[native code]\n}\n"; + } + + /** + * Decompile the body of a JavaScript Function. + *

+ * Decompiles the body a previously compiled JavaScript Function + * object to canonical source, omitting the function header and + * trailing brace. + * + * Returns '[native code]' if no decompilation information is available. + * + * @param fun the JavaScript function to decompile + * @param indent the number of spaces to indent the result + * @return a string representing the function body source. + */ + public final String decompileFunctionBody(Function fun, int indent) + { + if (fun instanceof BaseFunction) { + BaseFunction bf = (BaseFunction)fun; + return bf.decompile(indent, Decompiler.ONLY_BODY_FLAG); + } + // ALERT: not sure what the right response here is. + return "[native code]\n"; + } + + /** + * Create a new JavaScript object. + * + * Equivalent to evaluating "new Object()". + * @param scope the scope to search for the constructor and to evaluate + * against + * @return the new object + */ + public final Scriptable newObject(Scriptable scope) + { + return newObject(scope, "Object", ScriptRuntime.emptyArgs); + } + + /** + * Create a new JavaScript object by executing the named constructor. + * + * The call newObject(scope, "Foo") is equivalent to + * evaluating "new Foo()". + * + * @param scope the scope to search for the constructor and to evaluate against + * @param constructorName the name of the constructor to call + * @return the new object + */ + public final Scriptable newObject(Scriptable scope, String constructorName) + { + return newObject(scope, constructorName, ScriptRuntime.emptyArgs); + } + + /** + * Creates a new JavaScript object by executing the named constructor. + * + * Searches scope for the named constructor, calls it with + * the given arguments, and returns the result.

+ * + * The code + *

+     * Object[] args = { "a", "b" };
+     * newObject(scope, "Foo", args)
+ * is equivalent to evaluating "new Foo('a', 'b')", assuming that the Foo + * constructor has been defined in scope. + * + * @param scope The scope to search for the constructor and to evaluate + * against + * @param constructorName the name of the constructor to call + * @param args the array of arguments for the constructor + * @return the new object + */ + public final Scriptable newObject(Scriptable scope, String constructorName, + Object[] args) + { + scope = ScriptableObject.getTopLevelScope(scope); + Function ctor = ScriptRuntime.getExistingCtor(this, scope, + constructorName); + if (args == null) { args = ScriptRuntime.emptyArgs; } + return ctor.construct(this, scope, args); + } + + /** + * Create an array with a specified initial length. + *

+ * @param scope the scope to create the object in + * @param length the initial length (JavaScript arrays may have + * additional properties added dynamically). + * @return the new array object + */ + public final Scriptable newArray(Scriptable scope, int length) + { + NativeArray result = new NativeArray(length); + ScriptRuntime.setObjectProtoAndParent(result, scope); + return result; + } + + /** + * Create an array with a set of initial elements. + * + * @param scope the scope to create the object in. + * @param elements the initial elements. Each object in this array + * must be an acceptable JavaScript type and type + * of array should be exactly Object[], not + * SomeObjectSubclass[]. + * @return the new array object. + */ + public final Scriptable newArray(Scriptable scope, Object[] elements) + { + if (elements.getClass().getComponentType() != ScriptRuntime.ObjectClass) + throw new IllegalArgumentException(); + NativeArray result = new NativeArray(elements); + ScriptRuntime.setObjectProtoAndParent(result, scope); + return result; + } + + /** + * Get the elements of a JavaScript array. + *

+ * If the object defines a length property convertible to double number, + * then the number is converted Uint32 value as defined in Ecma 9.6 + * and Java array of that size is allocated. + * The array is initialized with the values obtained by + * calling get() on object for each value of i in [0,length-1]. If + * there is not a defined value for a property the Undefined value + * is used to initialize the corresponding element in the array. The + * Java array is then returned. + * If the object doesn't define a length property or it is not a number, + * empty array is returned. + * @param object the JavaScript array or array-like object + * @return a Java array of objects + * @since 1.4 release 2 + */ + public final Object[] getElements(Scriptable object) + { + return ScriptRuntime.getArrayElements(object); + } + + /** + * Convert the value to a JavaScript boolean value. + *

+ * See ECMA 9.2. + * + * @param value a JavaScript value + * @return the corresponding boolean value converted using + * the ECMA rules + */ + public static boolean toBoolean(Object value) + { + return ScriptRuntime.toBoolean(value); + } + + /** + * Convert the value to a JavaScript Number value. + *

+ * Returns a Java double for the JavaScript Number. + *

+ * See ECMA 9.3. + * + * @param value a JavaScript value + * @return the corresponding double value converted using + * the ECMA rules + */ + public static double toNumber(Object value) + { + return ScriptRuntime.toNumber(value); + } + + /** + * Convert the value to a JavaScript String value. + *

+ * See ECMA 9.8. + *

+ * @param value a JavaScript value + * @return the corresponding String value converted using + * the ECMA rules + */ + public static String toString(Object value) + { + return ScriptRuntime.toString(value); + } + + /** + * Convert the value to an JavaScript object value. + *

+ * Note that a scope must be provided to look up the constructors + * for Number, Boolean, and String. + *

+ * See ECMA 9.9. + *

+ * Additionally, arbitrary Java objects and classes will be + * wrapped in a Scriptable object with its Java fields and methods + * reflected as JavaScript properties of the object. + * + * @param value any Java object + * @param scope global scope containing constructors for Number, + * Boolean, and String + * @return new JavaScript object + */ + public static Scriptable toObject(Object value, Scriptable scope) + { + return ScriptRuntime.toObject(scope, value); + } + + /** + * @deprecated + * @see #toObject(Object, Scriptable) + */ + public static Scriptable toObject(Object value, Scriptable scope, + Class staticType) + { + return ScriptRuntime.toObject(scope, value); + } + + /** + * Convenient method to convert java value to its closest representation + * in JavaScript. + *

+ * If value is an instance of String, Number, Boolean, Function or + * Scriptable, it is returned as it and will be treated as the corresponding + * JavaScript type of string, number, boolean, function and object. + *

+ * Note that for Number instances during any arithmetic operation in + * JavaScript the engine will always use the result of + * Number.doubleValue() resulting in a precision loss if + * the number can not fit into double. + *

+ * If value is an instance of Character, it will be converted to string of + * length 1 and its JavaScript type will be string. + *

+ * The rest of values will be wrapped as LiveConnect objects + * by calling {@link WrapFactory#wrap(Context cx, Scriptable scope, + * Object obj, Class staticType)} as in: + *

+     *    Context cx = Context.getCurrentContext();
+     *    return cx.getWrapFactory().wrap(cx, scope, value, null);
+     * 
+ * + * @param value any Java object + * @param scope top scope object + * @return value suitable to pass to any API that takes JavaScript values. + */ + public static Object javaToJS(Object value, Scriptable scope) + { + if (value instanceof String || value instanceof Number + || value instanceof Boolean || value instanceof Scriptable) + { + return value; + } else if (value instanceof Character) { + return String.valueOf(((Character)value).charValue()); + } else { + Context cx = Context.getContext(); + return cx.getWrapFactory().wrap(cx, scope, value, null); + } + } + + /** + * Convert a JavaScript value into the desired type. + * Uses the semantics defined with LiveConnect3 and throws an + * Illegal argument exception if the conversion cannot be performed. + * @param value the JavaScript value to convert + * @param desiredType the Java type to convert to. Primitive Java + * types are represented using the TYPE fields in the corresponding + * wrapper class in java.lang. + * @return the converted value + * @throws EvaluatorException if the conversion cannot be performed + */ + public static Object jsToJava(Object value, Class desiredType) + throws EvaluatorException + { + return NativeJavaObject.coerceTypeImpl(desiredType, value); + } + + /** + * @deprecated + * @see #jsToJava(Object, Class) + * @throws IllegalArgumentException if the conversion cannot be performed. + * Note that {@link #jsToJava(Object, Class)} throws + * {@link EvaluatorException} instead. + */ + public static Object toType(Object value, Class desiredType) + throws IllegalArgumentException + { + try { + return jsToJava(value, desiredType); + } catch (EvaluatorException ex) { + IllegalArgumentException + ex2 = new IllegalArgumentException(ex.getMessage()); + Kit.initCause(ex2, ex); + throw ex2; + } + } + + /** + * Rethrow the exception wrapping it as the script runtime exception. + * Unless the exception is instance of {@link EcmaError} or + * {@link EvaluatorException} it will be wrapped as + * {@link WrappedException}, a subclass of {@link EvaluatorException}. + * The resulting exception object always contains + * source name and line number of script that triggered exception. + *

+ * This method always throws an exception, its return value is provided + * only for convenience to allow a usage like: + *

+     * throw Context.throwAsScriptRuntimeEx(ex);
+     * 
+ * to indicate that code after the method is unreachable. + * @throws EvaluatorException + * @throws EcmaError + */ + public static RuntimeException throwAsScriptRuntimeEx(Throwable e) + { + while ((e instanceof InvocationTargetException)) { + e = ((InvocationTargetException) e).getTargetException(); + } + // special handling of Error so scripts would not catch them + if (e instanceof Error) { + Context cx = getContext(); + if (cx == null || + !cx.hasFeature(Context.FEATURE_ENHANCED_JAVA_ACCESS)) + { + throw (Error)e; + } + } + if (e instanceof RhinoException) { + throw (RhinoException)e; + } + throw new WrappedException(e); + } + + /** + * Tell whether debug information is being generated. + * @since 1.3 + */ + public final boolean isGeneratingDebug() + { + return generatingDebug; + } + + /** + * Specify whether or not debug information should be generated. + *

+ * Setting the generation of debug information on will set the + * optimization level to zero. + * @since 1.3 + */ + public final void setGeneratingDebug(boolean generatingDebug) + { + if (sealed) onSealedMutation(); + generatingDebugChanged = true; + if (generatingDebug && getOptimizationLevel() > 0) + setOptimizationLevel(0); + this.generatingDebug = generatingDebug; + } + + /** + * Tell whether source information is being generated. + * @since 1.3 + */ + public final boolean isGeneratingSource() + { + return generatingSource; + } + + /** + * Specify whether or not source information should be generated. + *

+ * Without source information, evaluating the "toString" method + * on JavaScript functions produces only "[native code]" for + * the body of the function. + * Note that code generated without source is not fully ECMA + * conformant. + * @since 1.3 + */ + public final void setGeneratingSource(boolean generatingSource) + { + if (sealed) onSealedMutation(); + this.generatingSource = generatingSource; + } + + /** + * Get the current optimization level. + *

+ * The optimization level is expressed as an integer between -1 and + * 9. + * @since 1.3 + * + */ + public final int getOptimizationLevel() + { + return optimizationLevel; + } + + /** + * Set the current optimization level. + *

+ * The optimization level is expected to be an integer between -1 and + * 9. Any negative values will be interpreted as -1, and any values + * greater than 9 will be interpreted as 9. + * An optimization level of -1 indicates that interpretive mode will + * always be used. Levels 0 through 9 indicate that class files may + * be generated. Higher optimization levels trade off compile time + * performance for runtime performance. + * The optimizer level can't be set greater than -1 if the optimizer + * package doesn't exist at run time. + * @param optimizationLevel an integer indicating the level of + * optimization to perform + * @since 1.3 + * + */ + public final void setOptimizationLevel(int optimizationLevel) + { + if (sealed) onSealedMutation(); + if (optimizationLevel == -2) { + // To be compatible with Cocoon fork + optimizationLevel = -1; + } + checkOptimizationLevel(optimizationLevel); + if (codegenClass == null) + optimizationLevel = -1; + this.optimizationLevel = optimizationLevel; + } + + public static boolean isValidOptimizationLevel(int optimizationLevel) + { + return -1 <= optimizationLevel && optimizationLevel <= 9; + } + + public static void checkOptimizationLevel(int optimizationLevel) + { + if (isValidOptimizationLevel(optimizationLevel)) { + return; + } + throw new IllegalArgumentException( + "Optimization level outside [-1..9]: "+optimizationLevel); + } + + /** + * Returns the maximum stack depth (in terms of number of call frames) + * allowed in a single invocation of interpreter. If the set depth would be + * exceeded, the interpreter will throw an EvaluatorException in the script. + * Defaults to Integer.MAX_VALUE. The setting only has effect for + * interpreted functions (those compiled with optimization level set to -1). + * As the interpreter doesn't use the Java stack but rather manages its own + * stack in the heap memory, a runaway recursion in interpreted code would + * eventually consume all available memory and cause OutOfMemoryError + * instead of a StackOverflowError limited to only a single thread. This + * setting helps prevent such situations. + * + * @return The current maximum interpreter stack depth. + */ + public final int getMaximumInterpreterStackDepth() + { + return maximumInterpreterStackDepth; + } + + /** + * Sets the maximum stack depth (in terms of number of call frames) + * allowed in a single invocation of interpreter. If the set depth would be + * exceeded, the interpreter will throw an EvaluatorException in the script. + * Defaults to Integer.MAX_VALUE. The setting only has effect for + * interpreted functions (those compiled with optimization level set to -1). + * As the interpreter doesn't use the Java stack but rather manages its own + * stack in the heap memory, a runaway recursion in interpreted code would + * eventually consume all available memory and cause OutOfMemoryError + * instead of a StackOverflowError limited to only a single thread. This + * setting helps prevent such situations. + * + * @param max the new maximum interpreter stack depth + * @throws IllegalStateException if this context's optimization level is not + * -1 + * @throws IllegalArgumentException if the new depth is not at least 1 + */ + public final void setMaximumInterpreterStackDepth(int max) + { + if(sealed) onSealedMutation(); + if(optimizationLevel != -1) { + throw new IllegalStateException("Cannot set maximumInterpreterStackDepth when optimizationLevel != -1"); + } + if(max < 1) { + throw new IllegalArgumentException("Cannot set maximumInterpreterStackDepth to less than 1"); + } + maximumInterpreterStackDepth = max; + } + + /** + * Set the security controller for this context. + *

SecurityController may only be set if it is currently null + * and {@link SecurityController#hasGlobal()} is false. + * Otherwise a SecurityException is thrown. + * @param controller a SecurityController object + * @throws SecurityException if there is already a SecurityController + * object for this Context or globally installed. + * @see SecurityController#initGlobal(SecurityController controller) + * @see SecurityController#hasGlobal() + */ + public final void setSecurityController(SecurityController controller) + { + if (sealed) onSealedMutation(); + if (controller == null) throw new IllegalArgumentException(); + if (securityController != null) { + throw new SecurityException("Can not overwrite existing SecurityController object"); + } + if (SecurityController.hasGlobal()) { + throw new SecurityException("Can not overwrite existing global SecurityController object"); + } + securityController = controller; + } + + /** + * Set the LiveConnect access filter for this context. + *

{@link ClassShutter} may only be set if it is currently null. + * Otherwise a SecurityException is thrown. + * @param shutter a ClassShutter object + * @throws SecurityException if there is already a ClassShutter + * object for this Context + */ + public final void setClassShutter(ClassShutter shutter) + { + if (sealed) onSealedMutation(); + if (shutter == null) throw new IllegalArgumentException(); + if (classShutter != null) { + throw new SecurityException("Cannot overwrite existing " + + "ClassShutter object"); + } + classShutter = shutter; + } + + final ClassShutter getClassShutter() + { + return classShutter; + } + + /** + * Get a value corresponding to a key. + *

+ * Since the Context is associated with a thread it can be + * used to maintain values that can be later retrieved using + * the current thread. + *

+ * Note that the values are maintained with the Context, so + * if the Context is disassociated from the thread the values + * cannot be retrieved. Also, if private data is to be maintained + * in this manner the key should be a java.lang.Object + * whose reference is not divulged to untrusted code. + * @param key the key used to lookup the value + * @return a value previously stored using putThreadLocal. + */ + public final Object getThreadLocal(Object key) + { + if (hashtable == null) + return null; + return hashtable.get(key); + } + + /** + * Put a value that can later be retrieved using a given key. + *

+ * @param key the key used to index the value + * @param value the value to save + */ + public final void putThreadLocal(Object key, Object value) + { + if (sealed) onSealedMutation(); + if (hashtable == null) + hashtable = new Hashtable(); + hashtable.put(key, value); + } + + /** + * Remove values from thread-local storage. + * @param key the key for the entry to remove. + * @since 1.5 release 2 + */ + public final void removeThreadLocal(Object key) + { + if (sealed) onSealedMutation(); + if (hashtable == null) + return; + hashtable.remove(key); + } + + /** + * @deprecated + * @see #FEATURE_DYNAMIC_SCOPE + * @see #hasFeature(int) + */ + public final boolean hasCompileFunctionsWithDynamicScope() + { + return compileFunctionsWithDynamicScopeFlag; + } + + /** + * @deprecated + * @see #FEATURE_DYNAMIC_SCOPE + * @see #hasFeature(int) + */ + public final void setCompileFunctionsWithDynamicScope(boolean flag) + { + if (sealed) onSealedMutation(); + compileFunctionsWithDynamicScopeFlag = flag; + } + + /** + * @deprecated + * @see ClassCache#get(Scriptable) + * @see ClassCache#setCachingEnabled(boolean) + */ + public static void setCachingEnabled(boolean cachingEnabled) + { + } + + /** + * Set a WrapFactory for this Context. + *

+ * The WrapFactory allows custom object wrapping behavior for + * Java object manipulated with JavaScript. + * @see WrapFactory + * @since 1.5 Release 4 + */ + public final void setWrapFactory(WrapFactory wrapFactory) + { + if (sealed) onSealedMutation(); + if (wrapFactory == null) throw new IllegalArgumentException(); + this.wrapFactory = wrapFactory; + } + + /** + * Return the current WrapFactory, or null if none is defined. + * @see WrapFactory + * @since 1.5 Release 4 + */ + public final WrapFactory getWrapFactory() + { + if (wrapFactory == null) { + wrapFactory = new WrapFactory(); + } + return wrapFactory; + } + + /** + * Return the current debugger. + * @return the debugger, or null if none is attached. + */ + public final Debugger getDebugger() + { + return debugger; + } + + /** + * Return the debugger context data associated with current context. + * @return the debugger data, or null if debugger is not attached + */ + public final Object getDebuggerContextData() + { + return debuggerData; + } + + /** + * Set the associated debugger. + * @param debugger the debugger to be used on callbacks from + * the engine. + * @param contextData arbitrary object that debugger can use to store + * per Context data. + */ + public final void setDebugger(Debugger debugger, Object contextData) + { + if (sealed) onSealedMutation(); + this.debugger = debugger; + debuggerData = contextData; + } + + /** + * Return DebuggableScript instance if any associated with the script. + * If callable supports DebuggableScript implementation, the method + * returns it. Otherwise null is returned. + */ + public static DebuggableScript getDebuggableView(Script script) + { + if (script instanceof NativeFunction) { + return ((NativeFunction)script).getDebuggableView(); + } + return null; + } + + /** + * Controls certain aspects of script semantics. + * Should be overwritten to alter default behavior. + *

+ * The default implementation calls + * {@link ContextFactory#hasFeature(Context cx, int featureIndex)} + * that allows to customize Context behavior without introducing + * Context subclasses. {@link ContextFactory} documentation gives + * an example of hasFeature implementation. + * + * @param featureIndex feature index to check + * @return true if the featureIndex feature is turned on + * @see #FEATURE_NON_ECMA_GET_YEAR + * @see #FEATURE_MEMBER_EXPR_AS_FUNCTION_NAME + * @see #FEATURE_RESERVED_KEYWORD_AS_IDENTIFIER + * @see #FEATURE_TO_STRING_AS_SOURCE + * @see #FEATURE_PARENT_PROTO_PROPRTIES + * @see #FEATURE_E4X + * @see #FEATURE_DYNAMIC_SCOPE + * @see #FEATURE_STRICT_VARS + * @see #FEATURE_STRICT_EVAL + * @see #FEATURE_LOCATION_INFORMATION_IN_ERROR + * @see #FEATURE_STRICT_MODE + * @see #FEATURE_WARNING_AS_ERROR + * @see #FEATURE_ENHANCED_JAVA_ACCESS + */ + public boolean hasFeature(int featureIndex) + { + ContextFactory f = getFactory(); + return f.hasFeature(this, featureIndex); + } + + /** + Returns an object which specifies an E4X implementation to use within + this Context. Note + that the XMLLib.Factory interface should be considered experimental. + + The default implementation uses the implementation provided by this + Context's {@link ContextFactory}. + + @return An XMLLib.Factory. Should not return null if + {@link #FEATURE_E4X} is enabled. See {@link #hasFeature}. + */ + public XMLLib.Factory getE4xImplementationFactory() { + return getFactory().getE4xImplementationFactory(); + } + + /** + * Get threshold of executed instructions counter that triggers call to + * observeInstructionCount(). + * When the threshold is zero, instruction counting is disabled, + * otherwise each time the run-time executes at least the threshold value + * of script instructions, observeInstructionCount() will + * be called. + */ + public final int getInstructionObserverThreshold() + { + return instructionThreshold; + } + + /** + * Set threshold of executed instructions counter that triggers call to + * observeInstructionCount(). + * When the threshold is zero, instruction counting is disabled, + * otherwise each time the run-time executes at least the threshold value + * of script instructions, observeInstructionCount() will + * be called.

+ * Note that the meaning of "instruction" is not guaranteed to be + * consistent between compiled and interpretive modes: executing a given + * script or function in the different modes will result in different + * instruction counts against the threshold. + * {@link #setGenerateObserverCount} is called with true if + * threshold is greater than zero, false otherwise. + * @param threshold The instruction threshold + */ + public final void setInstructionObserverThreshold(int threshold) + { + if (sealed) onSealedMutation(); + if (threshold < 0) throw new IllegalArgumentException(); + instructionThreshold = threshold; + setGenerateObserverCount(threshold > 0); + } + + /** + * Turn on or off generation of code with callbacks to + * track the count of executed instructions. + * Currently only affects JVM byte code generation: this slows down the + * generated code, but code generated without the callbacks will not + * be counted toward instruction thresholds. Rhino's interpretive + * mode does instruction counting without inserting callbacks, so + * there is no requirement to compile code differently. + * @param generateObserverCount if true, generated code will contain + * calls to accumulate an estimate of the instructions executed. + */ + public void setGenerateObserverCount(boolean generateObserverCount) { + this.generateObserverCount = generateObserverCount; + } + + /** + * Allow application to monitor counter of executed script instructions + * in Context subclasses. + * Run-time calls this when instruction counting is enabled and the counter + * reaches limit set by setInstructionObserverThreshold(). + * The method is useful to observe long running scripts and if necessary + * to terminate them. + *

+ * The instruction counting support is available only for interpreted + * scripts generated when the optimization level is set to -1. + *

+ * The default implementation calls + * {@link ContextFactory#observeInstructionCount(Context cx, + * int instructionCount)} + * that allows to customize Context behavior without introducing + * Context subclasses. + * + * @param instructionCount amount of script instruction executed since + * last call to observeInstructionCount + * @throws Error to terminate the script + * @see #setOptimizationLevel(int) + */ + protected void observeInstructionCount(int instructionCount) + { + ContextFactory f = getFactory(); + f.observeInstructionCount(this, instructionCount); + } + + /** + * Create class loader for generated classes. + * The method calls {@link ContextFactory#createClassLoader(ClassLoader)} + * using the result of {@link #getFactory()}. + */ + public GeneratedClassLoader createClassLoader(ClassLoader parent) + { + ContextFactory f = getFactory(); + return f.createClassLoader(parent); + } + + public final ClassLoader getApplicationClassLoader() + { + if (applicationClassLoader == null) { + ContextFactory f = getFactory(); + ClassLoader loader = f.getApplicationClassLoader(); + if (loader == null) { + ClassLoader threadLoader + = VMBridge.instance.getCurrentThreadClassLoader(); + if (threadLoader != null + && Kit.testIfCanLoadRhinoClasses(threadLoader)) + { + // Thread.getContextClassLoader is not cached since + // its caching prevents it from GC which may lead to + // a memory leak and hides updates to + // Thread.getContextClassLoader + return threadLoader; + } + // Thread.getContextClassLoader can not load Rhino classes, + // try to use the loader of ContextFactory or Context + // subclasses. + Class fClass = f.getClass(); + if (fClass != ScriptRuntime.ContextFactoryClass) { + loader = fClass.getClassLoader(); + } else { + loader = getClass().getClassLoader(); + } + } + applicationClassLoader = loader; + } + return applicationClassLoader; + } + + public final void setApplicationClassLoader(ClassLoader loader) + { + if (sealed) onSealedMutation(); + if (loader == null) { + // restore default behaviour + applicationClassLoader = null; + return; + } + if (!Kit.testIfCanLoadRhinoClasses(loader)) { + throw new IllegalArgumentException( + "Loader can not resolve Rhino classes"); + } + applicationClassLoader = loader; + } + + /********** end of API **********/ + + /** + * Internal method that reports an error for missing calls to + * enter(). + */ + static Context getContext() + { + Context cx = getCurrentContext(); + if (cx == null) { + throw new RuntimeException( + "No Context associated with current Thread"); + } + return cx; + } + + private Object compileImpl(Scriptable scope, + Reader sourceReader, String sourceString, + String sourceName, int lineno, + Object securityDomain, boolean returnFunction, + Evaluator compiler, + ErrorReporter compilationErrorReporter) + throws IOException + { + if(sourceName == null) { + sourceName = "unnamed script"; + } + if (securityDomain != null && getSecurityController() == null) { + throw new IllegalArgumentException( + "securityDomain should be null if setSecurityController() was never called"); + } + + // One of sourceReader or sourceString has to be null + if (!(sourceReader == null ^ sourceString == null)) Kit.codeBug(); + // scope should be given if and only if compiling function + if (!(scope == null ^ returnFunction)) Kit.codeBug(); + + CompilerEnvirons compilerEnv = new CompilerEnvirons(); + compilerEnv.initFromContext(this); + if (compilationErrorReporter == null) { + compilationErrorReporter = compilerEnv.getErrorReporter(); + } + + if (debugger != null) { + if (sourceReader != null) { + sourceString = Kit.readReader(sourceReader); + sourceReader = null; + } + } + + /*APPJET*/ + Parser p = InformativeParser.makeParser(compilerEnv, + compilationErrorReporter); + if (returnFunction) { + p.calledByCompileFunction = true; + } + ScriptOrFnNode tree; + if (sourceString != null) { + tree = p.parse(sourceString, sourceName, lineno); + } else { + tree = p.parse(sourceReader, sourceName, lineno); + } + if (returnFunction) { + if (!(tree.getFunctionCount() == 1 + && tree.getFirstChild() != null + && tree.getFirstChild().getType() == Token.FUNCTION)) + { + // XXX: the check just look for the first child + // and allows for more nodes after it for compatibility + // with sources like function() {};;; + throw new IllegalArgumentException( + "compileFunction only accepts source with single JS function: "+sourceString); + } + } + + if (compiler == null) { + compiler = createCompiler(); + } + + String encodedSource = p.getEncodedSource(); + + Object bytecode = compiler.compile(compilerEnv, + tree, encodedSource, + returnFunction); + + if (debugger != null) { + if (sourceString == null) Kit.codeBug(); + if (bytecode instanceof DebuggableScript) { + DebuggableScript dscript = (DebuggableScript)bytecode; + notifyDebugger_r(this, dscript, sourceString); + } else { + throw new RuntimeException("NOT SUPPORTED"); + } + } + + Object result; + if (returnFunction) { + result = compiler.createFunctionObject(this, scope, bytecode, securityDomain); + } else { + result = compiler.createScriptObject(bytecode, securityDomain); + } + + return result; + } + + private static void notifyDebugger_r(Context cx, DebuggableScript dscript, + String debugSource) + { + cx.debugger.handleCompilationDone(cx, dscript, debugSource); + for (int i = 0; i != dscript.getFunctionCount(); ++i) { + notifyDebugger_r(cx, dscript.getFunction(i), debugSource); + } + } + + private static Class codegenClass = Kit.classOrNull( + "org.mozilla.javascript.optimizer.Codegen"); + private static Class interpreterClass = Kit.classOrNull( + "org.mozilla.javascript.Interpreter"); + + private Evaluator createCompiler() + { + Evaluator result = null; + if (optimizationLevel >= 0 && codegenClass != null) { + result = (Evaluator)Kit.newInstanceOrNull(codegenClass); + } + if (result == null) { + result = createInterpreter(); + } + return result; + } + + static Evaluator createInterpreter() + { + return (Evaluator)Kit.newInstanceOrNull(interpreterClass); + } + + static String getSourcePositionFromStack(int[] linep) + { + Context cx = getCurrentContext(); + if (cx == null) + return null; + if (cx.lastInterpreterFrame != null) { + Evaluator evaluator = createInterpreter(); + if (evaluator != null) + return evaluator.getSourcePositionFromStack(cx, linep); + } + /** + * A bit of a hack, but the only way to get filename and line + * number from an enclosing frame. + */ + CharArrayWriter writer = new CharArrayWriter(); + RuntimeException re = new RuntimeException(); + re.printStackTrace(new PrintWriter(writer)); + String s = writer.toString(); + int open = -1; + int close = -1; + int colon = -1; + for (int i=0; i < s.length(); i++) { + char c = s.charAt(i); + if (c == ':') + colon = i; + else if (c == '(') + open = i; + else if (c == ')') + close = i; + else if (c == '\n' && open != -1 && close != -1 && colon != -1 && + open < colon && colon < close) + { + String fileStr = s.substring(open + 1, colon); + if (!fileStr.endsWith(".java")) { + String lineStr = s.substring(colon + 1, close); + try { + linep[0] = Integer.parseInt(lineStr); + if (linep[0] < 0) { + linep[0] = 0; + } + return fileStr; + } + catch (NumberFormatException e) { + // fall through + } + } + open = close = colon = -1; + } + } + + return null; + } + + RegExpProxy getRegExpProxy() + { + if (regExpProxy == null) { + Class cl = Kit.classOrNull( + "org.mozilla.javascript.regexp.RegExpImpl"); + if (cl != null) { + regExpProxy = (RegExpProxy)Kit.newInstanceOrNull(cl); + } + } + return regExpProxy; + } + + final boolean isVersionECMA1() + { + return version == VERSION_DEFAULT || version >= VERSION_1_3; + } + +// The method must NOT be public or protected + SecurityController getSecurityController() + { + SecurityController global = SecurityController.global(); + if (global != null) { + return global; + } + return securityController; + } + + public final boolean isGeneratingDebugChanged() + { + return generatingDebugChanged; + } + + /** + * Add a name to the list of names forcing the creation of real + * activation objects for functions. + * + * @param name the name of the object to add to the list + */ + public void addActivationName(String name) + { + if (sealed) onSealedMutation(); + if (activationNames == null) + activationNames = new Hashtable(5); + activationNames.put(name, name); + } + + /** + * Check whether the name is in the list of names of objects + * forcing the creation of activation objects. + * + * @param name the name of the object to test + * + * @return true if an function activation object is needed. + */ + public final boolean isActivationNeeded(String name) + { + return activationNames != null && activationNames.containsKey(name); + } + + /** + * Remove a name from the list of names forcing the creation of real + * activation objects for functions. + * + * @param name the name of the object to remove from the list + */ + public void removeActivationName(String name) + { + if (sealed) onSealedMutation(); + if (activationNames != null) + activationNames.remove(name); + } + + private static String implementationVersion; + + private final ContextFactory factory; + private boolean sealed; + private Object sealKey; + + Scriptable topCallScope; + NativeCall currentActivationCall; + XMLLib cachedXMLLib; + + // for Objects, Arrays to tag themselves as being printed out, + // so they don't print themselves out recursively. + // Use ObjToIntMap instead of java.util.HashSet for JDK 1.1 compatibility + ObjToIntMap iterating; + + Object interpreterSecurityDomain; + + int version; + + private SecurityController securityController; + private ClassShutter classShutter; + private ErrorReporter errorReporter; + RegExpProxy regExpProxy; + private Locale locale; + private boolean generatingDebug; + private boolean generatingDebugChanged; + private boolean generatingSource=true; + boolean compileFunctionsWithDynamicScopeFlag; + boolean useDynamicScope; + private int optimizationLevel; + private int maximumInterpreterStackDepth; + private WrapFactory wrapFactory; + Debugger debugger; + private Object debuggerData; + private int enterCount; + private Object propertyListeners; + private Hashtable hashtable; + private ClassLoader applicationClassLoader; + + /** + * This is the list of names of objects forcing the creation of + * function activation records. + */ + Hashtable activationNames; + + // For the interpreter to store the last frame for error reports etc. + Object lastInterpreterFrame; + + // For the interpreter to store information about previous invocations + // interpreter invocations + ObjArray previousInterpreterInvocations; + + // For instruction counting (interpreter only) + int instructionCount; + int instructionThreshold; + + // It can be used to return the second index-like result from function + int scratchIndex; + + // It can be used to return the second uint32 result from function + long scratchUint32; + + // It can be used to return the second Scriptable result from function + Scriptable scratchScriptable; + + // Generate an observer count on compiled code + public boolean generateObserverCount = false; +} -- cgit v1.2.3