diff options
Diffstat (limited to '')
38 files changed, 506 insertions, 776 deletions
@@ -14,3 +14,6 @@ etherpad/src/static/js/easysync2_client.js etherpad/src/static/js/linestylefilter_client.js etherpad/*.log infrastructure/lib/cos.jar +build-arch-stamp +build-indep-stamp +configure-stamp diff --git a/bin/build.sh b/bin/build.sh new file mode 100755 index 0000000..3e42c96 --- /dev/null +++ b/bin/build.sh @@ -0,0 +1,39 @@ +#! /bin/bash + +################################################################################ +# +# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) +# http://www.pensec.it +# mail@pensec.it +# Copyright (c) 2010 Egil Möller <egil.moller@piratpartiet.se> +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. +# +################################################################################ + +##### +# You have to change following lines to your requirements: +# +export JAVA_HOME="/usr/lib/jvm/java-6-sun/" +export SCALA_HOME=/usr/share/java +export MYSQL_CONNECTOR_JAR=/usr/share/java/mysql-connector-java.jar +export JAVA="/usr/lib/jvm/java-6-sun/bin/java" +export SCALA="/usr/bin/scala" +export PATH="/usr/lib/jvm/java-6-sun/bin:$PATH" +##### + +# Rebuild jar +( cd infrastructure; ./bin/makejar.sh; ) +( cd infrastructure/ace; bin/make normal etherpad; ) +cp infrastructure/build/appjet.jar etherpad/appjet-eth-dev.jar +rm -rf infrastructure/{appjet,build,buildjs,buildcache} diff --git a/build/apt/etc/init.d/etherpad b/bin/etherpad.init.d index 95847b8..5881b70 100755 --- a/build/apt/etc/init.d/etherpad +++ b/bin/etherpad.init.d @@ -1,7 +1,7 @@ #! /bin/bash ### BEGIN INIT INFO -# Provides: etherpad-%BRANCH% +# Provides: etherpad # Required-Start: $local_fs $remote_fs # Required-Stop: $local_fs $remote_fs # Default-Start: 2 3 4 5 @@ -41,40 +41,11 @@ # Do NOT "set -e" - - -##### -# -# Patches the configuration file by replacing ,,%$2%'' with the contents of file -# $1 in file $3 -# -# @param $1 Configuration File which contains the value to set to -# @param $2 Configuration key to apply (can be done only once) -# @param $3 Configuration file -# -function apply_config() { - CONFIG_FILE="${3}" - TMP_FILE="/tmp/etherpad.properties" - - CONFIG_KEY="$2" - CONFIG_VALUE=`cat $1` - - sed "s/%$CONFIG_KEY%/$CONFIG_VALUE/" $CONFIG_FILE > $TMP_FILE - cp $TMP_FILE $CONFIG_FILE - rm $TMP_FILE -} -# -##### - - - - - # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/usr/sbin:/usr/bin:/sbin:/bin DESC="etherpad daemon" NAME="etherpad" -DAEMON_BASE="/usr/share/etherpad/etherpad" +DAEMON_BASE="/usr/share/etherpad" DAEMON=$DAEMON_BASE/bin/run.sh DAEMON_ARGS="" PIDFILE=/var/run/$NAME.pid @@ -98,31 +69,6 @@ SCRIPTNAME=/etc/init.d/$NAME # do_start() { - CONFIGURATION_BASE="/etc/etherpad" - CONFIGURATION_SRC="${CONFIGURATION_BASE}/etherpad.properties" - CONFIGURATION_DEST="${DAEMON_BASE}/etc/etherpad.localdev-default.properties" - - - # Reset configuration - cp "${CONFIGURATION_BASE}/etherpad.properties" "${CONFIGURATION_DEST}" - - - # Apply configuration properties - apply_config "${CONFIGURATION_BASE}/properties/is-production" "IS_PRODUCTION" "${CONFIGURATION_DEST}" - apply_config "${CONFIGURATION_BASE}/properties/admin-password" "ADMIN_PASSWORD" "${CONFIGURATION_DEST}" - apply_config "${CONFIGURATION_BASE}/properties/port" "PORT" "${CONFIGURATION_DEST}" - apply_config "${CONFIGURATION_BASE}/properties/database-host" "DATABASE_HOST" "${CONFIGURATION_DEST}" - apply_config "${CONFIGURATION_BASE}/properties/database-port" "DATABASE_PORT" "${CONFIGURATION_DEST}" - apply_config "${CONFIGURATION_BASE}/properties/database-name" "DATABASE_NAME" "${CONFIGURATION_DEST}" - apply_config "${CONFIGURATION_BASE}/properties/database-username" "DATABASE_USERNAME" "${CONFIGURATION_DEST}" - apply_config "${CONFIGURATION_BASE}/properties/database-password" "DATABASE_PASSWORD" "${CONFIGURATION_DEST}" - - - # Give the etherpad user the configuration file - chown etherpad:etherpad "${CONFIGURATION_DEST}" - - - # Return # 0 if daemon has been started # 1 if daemon was already running @@ -147,7 +93,7 @@ do_stop() # 1 if daemon was already stopped # 2 if daemon could not be stopped # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME + start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name java RETVAL="$?" [ "$RETVAL" = 2 ] && return 2 # Wait for children to finish too if this is a daemon that forks @@ -156,7 +102,7 @@ do_stop() # that waits for the process to drop all resources that could be # needed by services started subsequently. A last resort is to # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON + start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec java [ "$?" = 2 ] && return 2 # Many daemons don't delete their pidfiles when they exit. rm -f $PIDFILE @@ -172,7 +118,7 @@ do_reload() { # restarting (for example, when it is sent a SIGHUP), # then implement that here. # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME + start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name java return 0 } diff --git a/bin/run.sh b/bin/run.sh new file mode 100755 index 0000000..bd46b79 --- /dev/null +++ b/bin/run.sh @@ -0,0 +1,15 @@ +#! /bin/bash + +##### +# You have to change following lines to your requirements: +# +export JAVA_HOME="/usr/lib/jvm/java-6-sun/" +export SCALA_HOME=/usr/share/java +export MYSQL_CONNECTOR_JAR=/usr/share/java/mysql-connector-java.jar +export JAVA="/usr/lib/jvm/java-6-sun/bin/java" +export SCALA="/usr/bin/scala" +export PATH="/usr/lib/jvm/java-6-sun/bin:$PATH" +##### + +cd etherpad +exec bin/run-local.sh diff --git a/build/apt/.gitignore b/build/apt/.gitignore deleted file mode 100644 index 50139f0..0000000 --- a/build/apt/.gitignore +++ /dev/null @@ -1,5 +0,0 @@ -*~ -.tmp* -.build* -.package* -.revision* diff --git a/build/apt/DEBIAN/control b/build/apt/DEBIAN/control deleted file mode 100644 index 0129652..0000000 --- a/build/apt/DEBIAN/control +++ /dev/null @@ -1,16 +0,0 @@ -Package: etherpad-%BRANCH% -Priority: optional -Section: web -Maintainer: penSec.IT UG (haftungsbeschränkt) <etherpad@pensec.it> -Architecture: all -Version: 1.0-%REVISION% -Depends: debconf (>= 0.2.17), sun-java6-jre, scala, mysql-server, mysql-client, libmysql-java, bash -Description: Etherpad is... - EtherPad is the only web-based word processor that allows people to work - together in really real-time. - . - When multiple people edit the same document simultaneously, any changes are - instantly reflected on everyone's screen. The result is a new and productive - way to collaborate on text documents, useful for meeting notes, drafting - sessions, education, team programming, and more. - diff --git a/build/apt/DEBIAN/postinst b/build/apt/DEBIAN/postinst deleted file mode 100755 index f872508..0000000 --- a/build/apt/DEBIAN/postinst +++ /dev/null @@ -1,143 +0,0 @@ -#!/bin/bash - -################################################################################ -# -# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) -# http://www.pensec.it -# mail@pensec.it -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may not -# use this file except in compliance with the License. You may obtain a copy of -# the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations under -# the License. -# -################################################################################ - - - -set -e -. /usr/share/debconf/confmodule - -if [ -n "$ETHERPAD_DEBUG" ]; then - echo "now debugging $0 $@" - set -x -fi - -db_version 2.0 - - - - - -##### -# -# Propts the user for a configuration value and writes it into a property file -# -# @param $1 Name of the debconfig template to prompt -# @param $2 File to write the answer to -# @param $3 deprecated -# -function configuration_property() { - TEMPLATE="${1}" - PROPERTY_FILE="/etc/etherpad/properties/${2}" - PLACEHOLDER="${3}" - - PROPERTY="" - if [ -f "${PROPERTY_FILE}" ]; then - PROPERTY=`cat "${PROPERTY_FILE}"` - fi - db_input high "etherpad-%BRANCH%/${TEMPLATE}" || true - db_go - - db_get "etherpad-%BRANCH%/${TEMPLATE}" - if [ "" != "$RET" ]; then - PROPERTY="$RET" - fi - - echo "${PROPERTY}" > "${PROPERTY_FILE}" -} -# -##### - - - -case "$1" in - - configure) - - # Create system user - if ! getent passwd etherpad > /dev/null ; then - echo 'Adding system-user for etherpad' 1>&2 - adduser --system --group --quiet \ - --home /usr/share/etherpad --no-create-home \ - --disabled-login --force-badname etherpad - fi - - - # Give user the rights to write into the log & data directory - if [ -d "/var/log/etherpad" ]; then - EMPTY_STATEMENT="true" - else - mkdir -p "/var/log/etherpad" - fi - chown -R etherpad:etherpad "/var/log/etherpad" - - if [ -d "/usr/share/etherpad/etherpad/data" ]; then - EMPTY_STATEMENT="true" - else - mkdir -p "/usr/share/etherpad/etherpad/data" - fi - chown -R etherpad:etherpad "/usr/share/etherpad/etherpad/data" - - - # Give user the rights do write everywhere, did not yet figure - # out which rights are necessary, exactly - chown -R etherpad:etherpad "/usr/share/etherpad" - ;; - -esac - - - -##### -# -# Get configuration properties -# -configuration_property "is_production" "is-production" "IS_PRODUCTION" -configuration_property "admin_password" "admin-password" "ADMIN_PASSWORD" -configuration_property "port" "port" "PORT" -configuration_property "database_host" "database-host" "DATABASE_HOST" -configuration_property "database_port" "database-port" "DATABASE_PORT" -configuration_property "database_name" "database-name" "DATABASE_NAME" -configuration_property "database_username" "database-username" "DATABASE_USERNAME" -configuration_property "database_password" "database-password" "DATABASE_PASSWORD" -# -##### - - - - - -##### -# -# MySQL-Autosetup should be discussed. Simply calling setup-myql-db.sh is -# insufficient -# -# # Auto-setup database -# db_input medium "etherpad-%BRANCH%/setup_database" || true -# db_go -# -# db_get "etherpad-%BRANCH%/setup_database" -# if [ "$RET" = "true" ]; then -# # TODO -# fi -# -##### - diff --git a/build/apt/DEBIAN/templates b/build/apt/DEBIAN/templates deleted file mode 100644 index d7c6f36..0000000 --- a/build/apt/DEBIAN/templates +++ /dev/null @@ -1,68 +0,0 @@ -Template: etherpad-%BRANCH%/is_production -Type: boolean -Default: false -Description: Install as production mode? - Do you wish to install etherpad in production mode? - . - Note: be aware that etherpad is under active development and not yet ready - for general deployment! - -Template: etherpad-%BRANCH%/admin_password -Type: password -Default: password -Description: etherpad administration password - Please insert the administration password, default is password. - -Template: etherpad-%BRANCH%/port -Type: string -Default: 9000 -Description: etherpad tcp port - Please insert the port on which etherpad should listen, default is 9000. You - cannot use privileged ports (<= 1024). - . - If you want to make etherpad available on port 80/443 use etherpad-proxy which - will install a webserver (like nginx or apache) to proxy dynamic etherpad - contents and serve static contents directly. - -Template: etherpad-%BRANCH%/setup_database -Type: boolean -Default: false -Description: Do yo want etherpad to create a database for you? - Do you want to use the database wizard to setup a database for etherpad to - use? - . - Note: This wizard only works with local mysql installations. If you want to use - a remote mysql database, then answer no and edit - /etc/etherpad/etherpad.properties appropriatly. - -Template: etherpad-%BRANCH%/database_host -Type: string -Default: localhost -Description: MySQL database hostname - Please insert the database hostname, default is localhost. - -Template: etherpad-%BRANCH%/database_port -Type: string -Default: 3306 -Description: MySQL database port - Please insert the database port, default is 3306. - -Template: etherpad-%BRANCH%/database_name -Type: string -Default: etherpad -Description: MySQL database name - Please insert the database name, default is etherpad. - -Template: etherpad-%BRANCH%/database_username -Type: string -Default: etherpad -Description: MySQL database username - Please insert the database username, default is etherpad. - -Template: etherpad-%BRANCH%/database_password -Type: password -Default: password -Description: MySQL database password - Please insert the password for the specified database user, default is - password. - diff --git a/build/apt/README b/build/apt/README deleted file mode 100644 index 7dba49b..0000000 --- a/build/apt/README +++ /dev/null @@ -1,25 +0,0 @@ -README -====== - -This is a simple script to build debian packages from different etherpad -repositories. All you have to do is call ./do.sh and select the repository to -build from. - -Depending on the repository you use you have to have installed mercurial or -git-core in addition to the following packages: - - * debconf (>= 0.2.17) - * dpkg - * sun-java6-jdk - * scala - * mysql-client - * libmysql-java - * bash - - - ---- - -If you need commercial support on etherpad don't hesitate to contact -mail@pensec.it - diff --git a/build/apt/TODO b/build/apt/TODO deleted file mode 100644 index 9389c82..0000000 --- a/build/apt/TODO +++ /dev/null @@ -1,7 +0,0 @@ -TODO -==== - - * Auto-Database setup - * etherpad-official replaces etherpad-deprecated and etherpad-devel (and vice- - versa) - diff --git a/build/apt/build/build.sh b/build/apt/build/build.sh deleted file mode 100755 index ce308bb..0000000 --- a/build/apt/build/build.sh +++ /dev/null @@ -1,236 +0,0 @@ -#!/bin/bash - -################################################################################ -# -# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) -# http://www.pensec.it -# mail@pensec.it -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may not -# use this file except in compliance with the License. You may obtain a copy of -# the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations under -# the License. -# -################################################################################ - - - -##### -# Build a Debian/Ubuntu Etherpad package of the source -# -# @param $1 (optional) If "${1}" == "rebuild" then the cached repository will be -# purged and cloned instead of simply updated -# @param $REPOSITORY_URL the source of the package -# @param $REPOSITORY_NAME name of the new package, package will be named -# etherpad-${REPOSITORY_NAME} -# @param $REPOSITORY_TYPE Element of set {hg, git}, describes which command line -# toolchain (mercurial or git) will be used -# -if [ "" == "${REPOSITORY_URL}" ]; then - echo "Missing environment variable REPOSITORY_URL" - exit 1 -fi -if [ "" == "${REPOSITORY_NAME}" ]; then - echo "Missing environment variable REPOSITORY_NAME" - exit 1 -fi -if [ "" == "${REPOSITORY_TYPE}" ]; then - echo "Missing environment variable REPOSITORY_TYPE" - exit 1 -fi - - - -##### -# You have to change following lines to your requirements: -# -export JAVA_HOME=/usr/lib/jvm/java-6-sun/ -export SCALA_HOME=/usr/share/java -export MYSQL_CONNECTOR_JAR=/usr/share/java/mysql-connector-java.jar -export JAVA="$JAVA_HOME/bin/java" -export SCALA="$SCALA_HOME/bin/scala" -export PATH="$JAVA_HOME/bin:$SCALA_HOME/bin:$PATH" -# -##### - - -##### -# Don't change this! -# -REPOSITORY="${REPOSITORY_URL}" -BRANCH="${REPOSITORY_NAME}" - -TMP_DIR=".tmp.${REPOSITORY_NAME}" -BUILD_DIR=".build.${REPOSITORY_NAME}" -PACKAGE_DIR=".package.${REPOSITORY_NAME}" -REVISION_FILE=".revision.${REPOSITORY_NAME}" - -REBUILD="no" -if [ "rebuild" == "${1}" ]; then - REBUILD="yes" -fi -# -##### - - - -# If the repository isn't checked out by now we can't do a simple {git|hg} pull, -# we need to do a complete {git|hg} clone instead -if [ "yes" != "${REBUILD}" ]; then - if [ -d "${TMP_DIR}" ]; then - bash -c "cd ${TMP_DIR}; ${REPOSITORY_TYPE} pull" - else - echo "Repository does not exist, will fetch" - REBUILD="yes" - fi -fi - -# Refresh the complett repository (purge & clone instead of pull) -if [ "yes" == "${REBUILD}" ]; then - if [ -d "${TMP_DIR}" ]; then - rm -rf "${TMP_DIR}" - fi - - # Fetch the source from remote endpoint - $REPOSITORY_TYPE clone "${REPOSITORY}" "${TMP_DIR}" -fi - - - -# If there where errors during {git,hg} clone, then ${TMP_DIR} does not exist -# and we can't continue -if [ -d "${TMP_DIR}" ]; then - echo "Checkout seesm successful, continuing..." -else - echo "Error while checkout, missing directory ${TMP_DIR}" - exit 1 -fi - -# Ugly fix to work with the google repository which includes a trunk and -# branches directory instead of using mercurial branches -if [ -d "${TMP_DIR}/trunk" ]; then - touch "${TMP_DIR}/LICENSE" - touch "${TMP_DIR}/README.md" - bash -c "cd ${TMP_DIR}; cp -r trunk/* ./" -fi - - - -# Rebuild jar -echo "" -echo "Trying to apply patch. If it detects the patch doesn't match just skip" -echo "" -cp "build/makejar.diff" "${TMP_DIR}/makejar.diff" -bash -c "cd ${TMP_DIR}; patch -p1 < makejar.diff" -bash -c "cd ${TMP_DIR}/infrastructure; ./bin/makejar.sh" -bash -c "cd ${TMP_DIR}/infrastructure/ace; bin/make normal etherpad" -cp "${TMP_DIR}/infrastructure/build/appjet.jar" "${TMP_DIR}/etherpad/appjet-eth-dev.jar" - - - -# Testing the build -#bash -c "./build/test-build.sh" - - - -# Increments the version & create the control file -REVISION="0" -if [ -f "${REVISION_FILE}" ]; then - REVISION=`cat "${REVISION_FILE}"` - REVISION=`expr $REVISION + 1` -fi -echo $REVISION > "${REVISION_FILE}" - -# Patch the debain control file -cp "DEBIAN/control" "${TMP_DIR}/control.0" -sed "s/%BRANCH%/${BRANCH}/" "${TMP_DIR}/control.0" > "${TMP_DIR}/control.1" -sed "s/%REVISION%/${REVISION}/" "${TMP_DIR}/control.1" > "${TMP_DIR}/control.2" -cp "${TMP_DIR}/control.2" "${TMP_DIR}/control" - -# Patch the install & deinstall script -cp "DEBIAN/prerm" "${TMP_DIR}/prerm" -cp "DEBIAN/postinst" "${TMP_DIR}/postinst.0" -sed "s/%BRANCH%/${BRANCH}/" "${TMP_DIR}/postinst.0" > "${TMP_DIR}/postinst.1" -cp "${TMP_DIR}/postinst.1" "${TMP_DIR}/postinst" - -# Patch debconf templates -cp "DEBIAN/templates" "${TMP_DIR}/templates.0" -sed "s/%BRANCH%/${BRANCH}/" "${TMP_DIR}/templates.0" > "${TMP_DIR}/templates.1" -cp "${TMP_DIR}/templates.1" "${TMP_DIR}/templates" - -# Patch init script -cp "etc/init.d/etherpad" "${TMP_DIR}/init.0" -sed "s/%BRANCH%/${BRANCH}/" "${TMP_DIR}/init.0" > "${TMP_DIR}/init.1" -cp "${TMP_DIR}/init.1" "${TMP_DIR}/init" - -# Copy the config folder -cp -r "etc" "${TMP_DIR}/etc" - - - -# Build the package enviroment (needed to build with dpgk-deb build) -if [ -d "${BUILD_DIR}" ]; then - sudo rm -r "${BUILD_DIR}" -fi -mkdir "${BUILD_DIR}" -mkdir -p "${BUILD_DIR}/DEBIAN" -mkdir -p "${BUILD_DIR}/usr/share/etherpad" -mkdir -p "${BUILD_DIR}/usr/share/doc/etherpad" -mkdir -p "${BUILD_DIR}/var/log/etherpad" - - - -# Gather the required files -cp "${TMP_DIR}/control" "${BUILD_DIR}/DEBIAN/control" -cp "${TMP_DIR}/postinst" "${BUILD_DIR}/DEBIAN/postinst" -cp "${TMP_DIR}/prerm" "${BUILD_DIR}/DEBIAN/prerm" -cp "${TMP_DIR}/templates" "${BUILD_DIR}/DEBIAN/templates" -cp -r "${TMP_DIR}/etc" "${BUILD_DIR}/" -cp "${TMP_DIR}/init" "${BUILD_DIR}/etc/init.d/etherpad" -cp -r "${TMP_DIR}/etherpad" "${BUILD_DIR}/usr/share/etherpad" -cp "build/run.sh" "${BUILD_DIR}/usr/share/etherpad/etherpad/bin" -mkdir -p "${BUILD_DIR}/usr/share/etherpad/etherpad/data" -cp -r "${TMP_DIR}/infrastructure" "${BUILD_DIR}/usr/share/etherpad" -cp "${TMP_DIR}/COPYING" "${BUILD_DIR}/usr/share/doc/etherpad" -cp "${TMP_DIR}/LICENSE" "${BUILD_DIR}/usr/share/doc/etherpad" -cp "${TMP_DIR}/README.md" "${BUILD_DIR}/usr/share/doc/etherpad" - - - -# Fix priviliges and build the package -sudo chown -R root:root "${BUILD_DIR}" -sudo chmod +x "${BUILD_DIR}/DEBIAN/postinst" -sudo chmod +x "${BUILD_DIR}/DEBIAN/prerm" -sudo chmod +x "${BUILD_DIR}/etc/init.d/etherpad" -sudo chmod -R 777 "${BUILD_DIR}/usr/share/etherpad/etherpad/data" - -if [ -d "${PACKAGE_DIR}" ]; then - rm -rf "${PACKAGE_DIR}" -fi -mkdir "${PACKAGE_DIR}" - -dpkg-deb --build "${BUILD_DIR}" "${PACKAGE_DIR}" - - - -# Transfer the package to local repository if environment variable -PACKAGE=`bash -c "cd ${PACKAGE_DIR}; find . -name *.deb"` - -if [ "yes" == "${DEPLOY_TO_LOCAL_REPOSITORY}" ]; then - if [ -f "${PACKAGE_DIR}/${PACKAGE}" ]; then - cp "${PACKAGE_DIR}/${PACKAGE}" "/var/www/packages" - bash -c "cd /var/www/packages; reprepro -b . includedeb lenny ${PACKAGE}; rm ${PACKAGE}" - else - echo "No package in ${PACKAGE_DIR}" - fi -fi - -echo "Finished building package ${PACKAGE}" - diff --git a/build/apt/build/makejar.diff b/build/apt/build/makejar.diff deleted file mode 100644 index 6e0d44e..0000000 --- a/build/apt/build/makejar.diff +++ /dev/null @@ -1,17 +0,0 @@ -diff -r 81287c8af1ac infrastructure/bin/makejar.sh ---- a/infrastructure/bin/makejar.sh Fri Dec 18 18:44:23 2009 +1100 -+++ b/infrastructure/bin/makejar.sh Sat Dec 19 09:50:05 2009 -0500 -@@ -32,11 +32,11 @@ - - TMPSTORE=/tmp/ajbuild-tmpstore-`date +%s` - --JARFILES=`echo $SCALA_HOME/lib/scala-library.jar lib/*.jar lib/manifest` -+JARFILES=`echo $SCALA_HOME/scala-library.jar lib/*.jar lib/manifest` - function genjar { - echo "unzipping JARs..." - pushd $1 >> /dev/null -- $JAR xf $SCALA_HOME/lib/scala-library.jar -+ $JAR xf $SCALA_HOME/scala-library.jar - rm -rf META-INF - for a in ../../lib/*.jar; do - $JAR xf $a diff --git a/build/apt/build/test.sh b/build/apt/build/test.sh deleted file mode 100755 index 0abf7bf..0000000 --- a/build/apt/build/test.sh +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/bash - -################################################################################ -# -# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) -# http://www.pensec.it -# mail@pensec.it -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may not -# use this file except in compliance with the License. You may obtain a copy of -# the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations under -# the License. -# -################################################################################ - - - - - -##### -# Must be called by build.sh -##### - - - -# Truncate database to test start etherpad -echo "I'm going to lunch MySQL now, you maybe have to enter your root@localhost password" -sudo /etc/init.d/mysql start - -DATABASE_NAME="etherpad" -DATABASE_USER="etherpad" -DROP_DATABASE="DROP DATABASE ${DATABASE_NAME}" -CREATE_DATABASE="CREATE DATABASE ${DATABASE_NAME}" -DROP_USER="DROP USER '${DATABASE_USER}'@'localhost'" -CREATE_USER="GRANT ALL PRIVILEGES ON ${DATABASE_NAME}.* TO '${DATABASE_USER}'@'localhost' identified by 'password';" -echo "${DROP_DATABASE}; ${CREATE_DATABASE}; ${DROP_USER}; ${CREATE_USER}" | mysql -u root -p | grep etherpad - - - -# Start etherpad and wait for the HTTP-Server to be available -echo "I'm going to lunch etherpad in a clean environment, try if it works on http://localhost:9000/" -echo "Kill with ^C to build debian package (waiting 10 seconds)" -sleep 10 -bash -c "cd ${TMP_DIR}/etherpad; ./bin/run-local.sh" - diff --git a/build/apt/do.sh b/build/apt/do.sh deleted file mode 100755 index c268ce9..0000000 --- a/build/apt/do.sh +++ /dev/null @@ -1,127 +0,0 @@ -#!/bin/bash - -################################################################################ -# -# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) -# http://www.pensec.it -# mail@pensec.it -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may not -# use this file except in compliance with the License. You may obtain a copy of -# the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations under -# the License. -# -################################################################################ - - - -##### -# -# To build a Debian/Ubuntu package simply run this script. It will prompt you -# for the repository to build from. -# -# Dependencies: debconf (>= 0.2.17), dpkg, sun-java6-jdk, scala, mysql-client, -# libmysql-java, bash, mercurial | git-core -# -##### - - - -##### -# -# There has to be a better way of doing this ;-) -# -REPOSITORY_0_URL="https://etherpad.googlecode.com/hg/trunk" -REPOSITORY_0_NAME="deprecated" -REPOSITORY_0_TYPE="hg" -REPOSITORY_1_URL="git://github.com/ether/pad.git" -REPOSITORY_1_NAME="official" -REPOSITORY_1_TYPE="git" -REPOSITORY_2_URL="git://github.com/redhog/pad.git" -REPOSITORY_2_NAME="devel" -REPOSITORY_2_TYPE="git" -REPOSITORY_3_URL="git://github.com/johnyma22/pad.git" -REPOSITORY_3_NAME="johny" -REPOSITORY_3_TYPE="git" -REPOSITORY_4_URL="git://github.com/Pita/pad.git" -REPOSITORY_4_NAME="pita" -REPOSITORY_4_TYPE="git" -REPOSITORY_5_URL="./../../" -REPOSITORY_5_NAME="local" -REPOSITORY_5_TYPE="git" - - -# Tell the user his choises -echo "Please choose the repository to build a debian package from:" -echo "" - -for i in {0..5} -do - URL="REPOSITORY_${i}_URL" - NAME="REPOSITORY_${i}_NAME" - TYPE="REPOSITORY_${i}_TYPE" - - echo " ${i}) ${!NAME} ${!URL}" -done -echo "" -read -p "Repository id: " REPOSITORY - - - -# Test if user's too stupid to input correct number -URL="REPOSITORY_${REPOSITORY}_URL" -NAME="REPOSITORY_${REPOSITORY}_NAME" -TYPE="REPOSITORY_${REPOSITORY}_TYPE" - -if [ "" == "${!URL}" ]; then - echo "Invalid repository id \"${REPOSITORY}\"" - exit 1 -fi - - -# Communicate repository details to build script -export REPOSITORY_URL="${!URL}" -export REPOSITORY_NAME="${!NAME}" -export REPOSITORY_TYPE="${!TYPE}" -# -##### - - - -##### -# -# Is a complete rebuild necessary or is a simple update sufficient -# -echo "" -read -p "Purge before rebuild (yes/no) [n]: " REBUILD - -if [ "y" == "${REBUILD}" ]; then - echo "You answered \"${REBUILD}\", will purge before rebuilding" - REBUILD="rebuild" -else - echo "You answered \"${REBUILD}\", will try ${!TYPE} pull before rebuilding" -fi -# -##### - - - -##### -# -# Tell user what we're going to to and then do it -# -echo "" -echo "Will build package etherpad-${!NAME} form ${!TYPE}:${!URL}, please be patient..." -echo "" - -bash -c "./build/build.sh ${REBUILD}" -# -##### - diff --git a/build/apt/etc/etherpad/etherpad.properties b/build/apt/etc/etherpad/etherpad.properties deleted file mode 100644 index 69114c7..0000000 --- a/build/apt/etc/etherpad/etherpad.properties +++ /dev/null @@ -1,16 +0,0 @@ -ajstdlibHome = ../infrastructure/framework-src/modules -appjetHome = ./data/appjet -devMode = true -etherpad.adminPass = %ADMIN_PASSWORD% -etherpad.fakeProduction = false -etherpad.isProduction = %IS_PRODUCTION% -etherpad.SQL_JDBC_DRIVER = com.mysql.jdbc.Driver -etherpad.SQL_JDBC_URL = jdbc:mysql://%DATABASE_HOST%:%DATABASE_PORT%/%DATABASE_NAME% -etherpad.SQL_PASSWORD = %DATABASE_PASSWORD% -etherpad.SQL_USERNAME = %DATABASE_USERNAME% -listen = %PORT% -logDir = /var/log/etherpad -modulePath = ./src -transportPrefix = /comet -transportUseWildcardSubdomains = true -useVirtualFileRoot = ./src diff --git a/build/apt/etc/etherpad/properties/admin-password b/build/apt/etc/etherpad/properties/admin-password deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/admin-password +++ /dev/null diff --git a/build/apt/etc/etherpad/properties/database-host b/build/apt/etc/etherpad/properties/database-host deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/database-host +++ /dev/null diff --git a/build/apt/etc/etherpad/properties/database-name b/build/apt/etc/etherpad/properties/database-name deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/database-name +++ /dev/null diff --git a/build/apt/etc/etherpad/properties/database-password b/build/apt/etc/etherpad/properties/database-password deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/database-password +++ /dev/null diff --git a/build/apt/etc/etherpad/properties/database-port b/build/apt/etc/etherpad/properties/database-port deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/database-port +++ /dev/null diff --git a/build/apt/etc/etherpad/properties/database-username b/build/apt/etc/etherpad/properties/database-username deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/database-username +++ /dev/null diff --git a/build/apt/etc/etherpad/properties/is-production b/build/apt/etc/etherpad/properties/is-production deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/is-production +++ /dev/null diff --git a/build/apt/etc/etherpad/properties/port b/build/apt/etc/etherpad/properties/port deleted file mode 100644 index e69de29..0000000 --- a/build/apt/etc/etherpad/properties/port +++ /dev/null diff --git a/debian/README b/debian/README new file mode 100644 index 0000000..21f1d88 --- /dev/null +++ b/debian/README @@ -0,0 +1,6 @@ +The Debian Package etherpad +---------------------------- + +Comments regarding the Package + + -- Egil Möller <egil.moller@piratpartiet.se> Mon, 26 Apr 2010 19:51:51 +0200 diff --git a/debian/README.Debian b/debian/README.Debian new file mode 100644 index 0000000..b246eb5 --- /dev/null +++ b/debian/README.Debian @@ -0,0 +1,6 @@ +etherpad for Debian +------------------- + +<possible notes regarding this package - if none, delete this file> + + -- Egil Möller <egil.moller@piratpartiet.se> Mon, 26 Apr 2010 19:51:51 +0200 diff --git a/debian/changelog b/debian/changelog new file mode 100644 index 0000000..9f15642 --- /dev/null +++ b/debian/changelog @@ -0,0 +1,5 @@ +etherpad (1.0) unstable; urgency=low + + * Initial Release. + + -- Egil Möller <egil.moller@piratpartiet.se> Mon, 26 Apr 2010 19:51:51 +0200 diff --git a/debian/compat b/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/debian/compat @@ -0,0 +1 @@ +7 diff --git a/debian/config b/debian/config new file mode 100644 index 0000000..f97ab33 --- /dev/null +++ b/debian/config @@ -0,0 +1,49 @@ +#!/bin/bash + +################################################################################ +# +# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) +# http://www.pensec.it +# mail@pensec.it +# Copyright (c) 2010 Egil Möller <egil.moller@piratpartiet.se> +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. +# +################################################################################ + + + +set -e +. /usr/share/debconf/confmodule + +if [ -n "$ETHERPAD_DEBUG" ]; then + echo "now debugging $0 $@" + set -x +fi + +db_version 2.0 + +# Set up database +. /usr/share/dbconfig-common/dpkg/config.mysql +dbc_go etherpad $@ + +db_input high "etherpad/admin_password" || true +db_go + +db_get "etherpad/topdomains" +if ! [ "$RET" ]; then + db_set "etherpad/topdomains" "$(hostname -f)" +fi + +db_input high "etherpad/topdomains" || true +db_go diff --git a/debian/control b/debian/control new file mode 100644 index 0000000..14ffd66 --- /dev/null +++ b/debian/control @@ -0,0 +1,20 @@ +Source: etherpad +Section: unknown +Priority: extra +Maintainer: Egil Möller <egil.moller@piratpartiet.se> +Build-Depends: debhelper (>= 7), dbconfig-common, sun-java6-jdk, mysql-client, libmysql-java, scala (>= 2.7) +Build-Conflicts: libgcj-common, java-gcj-compat-headless, java-gcj-compat, gcj-4.3-base +Standards-Version: 3.8.0 +Homepage: <insert the upstream URL, if relevant> + +Package: etherpad +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, dbconfig-common, sun-java6-jdk, mysql-client, libmysql-java, scala (>= 2.7) +Description: Etherpad multiuser web-based word processor + EtherPad is the only web-based word processor that allows people to work + together in really real-time. + . + When multiple people edit the same document simultaneously, any changes are + instantly reflected on everyone's screen. The result is a new and productive + way to collaborate on text documents, useful for meeting notes, drafting + sessions, education, team programming, and more. diff --git a/debian/copyright b/debian/copyright new file mode 100644 index 0000000..21f3788 --- /dev/null +++ b/debian/copyright @@ -0,0 +1,42 @@ +This package was debianized by Egil Möller <egil.moller@piratpartiet.se> on +Mon, 26 Apr 2010 19:51:51 +0200. + +It was downloaded from <url://example.com> + +Upstream Author(s): + + <put author's name and email here> + <likewise for another author> + +Copyright: + + <Copyright (C) YYYY Name OfAuthor> + <likewise for another author> + +License: + + Redistribution and use in source and binary forms, with or without + modification, are permitted under the terms of the BSD License. + + THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + +On Debian systems, the complete text of the BSD License can be +found in `/usr/share/common-licenses/BSD'. + + +The Debian packaging is copyright 2010, Egil Möller <egil.moller@piratpartiet.se> and +is licensed under the GPL, see `/usr/share/common-licenses/GPL'. + + +# Please also look if there are files or directories which have a +# different copyright/license attached and list them here. diff --git a/debian/postinst b/debian/postinst new file mode 100755 index 0000000..3b85741 --- /dev/null +++ b/debian/postinst @@ -0,0 +1,81 @@ +#!/bin/bash + +################################################################################ +# +# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) +# http://www.pensec.it +# mail@pensec.it +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. +# +################################################################################ + + + +set -e +. /usr/share/debconf/confmodule + +if [ -n "$ETHERPAD_DEBUG" ]; then + echo "now debugging $0 $@" + set -x +fi + +db_version 2.0 + +. /usr/share/dbconfig-common/dpkg/postinst.mysql +dbc_go etherpad $@ + +db_get "etherpad/admin_password" +db_admin_password="$RET" +db_get "etherpad/topdomains" +db_topdomains="$RET" + +. /etc/dbconfig-common/etherpad.conf + + + +# Create system user +if ! getent passwd etherpad > /dev/null ; then + echo 'Adding system-user for etherpad' 1>&2 + adduser --system --group --quiet \ + --home /usr/share/etherpad --no-create-home \ + --disabled-login --force-badname etherpad +fi + +# Give user the rights to write into the log & data directory +chown -R etherpad:etherpad "/var/log/etherpad" +chown -R etherpad:etherpad "/usr/share/etherpad/etherpad/data" +# Give user the rights do write everywhere, did not yet figure +# out which rights are necessary, exactly +chown -R etherpad:etherpad "/usr/share/etherpad" + +if ! [ "$dbc_dbserver" ]; then + dbc_dbserver=localhost +fi +if ! [ "$dbc_dbport" ]; then + dbc_dbport=3306 +fi + + +m4 \ + -D __db_admin_password__="$db_admin_password" \ + -D __dbc_dbserver__="$dbc_dbserver" \ + -D __dbc_dbport__="$dbc_dbport" \ + -D __dbc_dbname__="$dbc_dbname" \ + -D __dbc_dbpass__="$dbc_dbpass" \ + -D __dbc_dbuser__="$dbc_dbuser" \ + -D __db_topdomains__="$db_topdomains" \ + < /etc/etherpad/etherpad.local.properties.tmpl \ + > /etc/etherpad/etherpad.local.properties + +chown etherpad:etherpad /etc/etherpad/etherpad.local.properties diff --git a/debian/postrm b/debian/postrm new file mode 100644 index 0000000..ef4425a --- /dev/null +++ b/debian/postrm @@ -0,0 +1,38 @@ +#!/bin/bash + +################################################################################ +# +# Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) +# http://www.pensec.it +# mail@pensec.it +# Copyright (c) 2010 Egil Möller <egil.moller@piratpartiet.se> +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may not +# use this file except in compliance with the License. You may obtain a copy of +# the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations under +# the License. +# +################################################################################ + + + +set -e +. /usr/share/debconf/confmodule + +if [ -n "$ETHERPAD_DEBUG" ]; then + echo "now debugging $0 $@" + set -x +fi + +db_version 2.0 + +# Set up database +. /usr/share/dbconfig-common/dpkg/postrm.mysql +dbc_go etherpad $@ diff --git a/build/apt/build/run.sh b/debian/preinst index 1aa3954..ffced88 100755..100644 --- a/build/apt/build/run.sh +++ b/debian/preinst @@ -5,6 +5,7 @@ # Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) # http://www.pensec.it # mail@pensec.it +# Copyright (c) 2010 Egil Möller <egil.moller@piratpartiet.se> # # Licensed under the Apache License, Version 2.0 (the "License"); you may not # use this file except in compliance with the License. You may obtain a copy of @@ -22,7 +23,12 @@ +set -e +. /usr/share/debconf/confmodule +if [ -n "$ETHERPAD_DEBUG" ]; then + echo "now debugging $0 $@" + set -x +fi -bash -c "`dirname $0`/run-local.sh" > "/var/log/etherpad/log" 2> "/var/log/etherpad/error" - +db_version 2.0 diff --git a/build/apt/DEBIAN/prerm b/debian/prerm index 9a9f516..7b7d352 100755 --- a/build/apt/DEBIAN/prerm +++ b/debian/prerm @@ -1,10 +1,11 @@ -#!/bin/sh +#!/bin/bash ################################################################################ # # Copyright (c) 2010 penSec.IT UG (haftungsbeschränkt) # http://www.pensec.it # mail@pensec.it +# Copyright (c) 2010 Egil Möller <egil.moller@piratpartiet.se> # # Licensed under the Apache License, Version 2.0 (the "License"); you may not # use this file except in compliance with the License. You may obtain a copy of @@ -23,6 +24,18 @@ set -e +. /usr/share/debconf/confmodule + +if [ -n "$ETHERPAD_DEBUG" ]; then + echo "now debugging $0 $@" + set -x +fi + +db_version 2.0 + +# Set up database +. /usr/share/dbconfig-common/dpkg/prerm.mysql +dbc_go etherpad $@ # Remove log+data directories, otherwise uninstall will fail rm -rf /var/log/etherpad diff --git a/debian/rules b/debian/rules new file mode 100755 index 0000000..3a06dbe --- /dev/null +++ b/debian/rules @@ -0,0 +1,139 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. +# +# Modified to make a template file for a multi-binary package with separated +# build-arch and build-indep targets by Bill Allombert 2001 + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# This has to be exported to make some magic below work. +export DH_OPTIONS + + + + + + +configure: configure-stamp +configure-stamp: + dh_testdir + # Add here commands to configure the package. + + touch configure-stamp + + +#Architecture +build: build-arch build-indep + +build-arch: build-arch-stamp +build-arch-stamp: configure-stamp + + # Add here commands to compile the arch part of the package. + #$(MAKE) + bin/build.sh + touch $@ + +build-indep: build-indep-stamp +build-indep-stamp: configure-stamp + + # Add here commands to compile the indep part of the package. + #$(MAKE) doc + touch $@ + +clean: + dh_testdir + dh_testroot + rm -f build-arch-stamp build-indep-stamp configure-stamp + + # Add here commands to clean up after the build process. + #git clean -X + + dh_clean --exclude ./build/apt/.tmp.local/infrastructure/bin/makejar.sh.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Decompiler.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Parser.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Token.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/TokenStream.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Decompiler.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Parser.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Token.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/TokenStream.java.orig + +install: install-indep install-arch +install-indep: + dh_testdir + dh_testroot + dh_prep -i --exclude ./build/apt/.tmp.local/infrastructure/bin/makejar.sh.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Decompiler.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Parser.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Token.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/TokenStream.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Decompiler.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Parser.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Token.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/TokenStream.java.orig + dh_installdirs -i + + # Add here commands to install the indep part of the package into + # debian/<package>-doc. + #INSTALLDOC# + + dh_install -i + +install-arch: + dh_testdir + dh_testroot + dh_prep -s --exclude ./build/apt/.tmp.local/infrastructure/bin/makejar.sh.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Decompiler.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Parser.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Token.java.orig --exclude ./build/apt/.tmp.local/infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/TokenStream.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Decompiler.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Parser.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/Token.java.orig --exclude ./infrastructure/yuicompressor/src/yuicompressor/org/mozilla/javascript/TokenStream.java.orig + dh_installdirs -s + + # Add here commands to install the arch part of the package into + # debian/tmp. + # $(MAKE) DESTDIR=$(CURDIR)/debian/etherpad install + + mkdir -p debian/etherpad/usr/share/etherpad + cp -a $$(ls | grep -v debian) debian/etherpad/usr/share/etherpad + + mkdir -p debian/etherpad/etc + mv debian/etherpad/usr/share/etherpad/etherpad/etc debian/etherpad/etc/etherpad + ln -s /etc/etherpad debian/etherpad/usr/share/etherpad/etherpad/etc + + mkdir -p debian/etherpad/var/log/etherpad + + mkdir -p debian/etherpad/etc/init.d + ln -s /usr/share/etherpad/bin/etherpad.init.d debian/etherpad/etc/init.d/etherpad + + + dh_install -s + +# Must not depend on anything. This is to be called by +# binary-arch/binary-indep +# in another 'make' thread. +binary-common: + dh_testdir + dh_testroot + dh_installchangelogs + dh_installdocs + dh_installexamples +# dh_installmenu + dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_python +# dh_installinit +# dh_installcron +# dh_installinfo + dh_installman + dh_link + dh_strip + dh_compress + dh_fixperms +# dh_perl + dh_makeshlibs + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture independant packages using the common target. +binary-indep: build-indep install-indep + $(MAKE) -f debian/rules DH_OPTIONS=-i binary-common + +# Build architecture dependant packages using the common target. +binary-arch: build-arch install-arch + $(MAKE) -f debian/rules DH_OPTIONS=-s binary-common + +binary: binary-arch binary-indep +.PHONY: build clean binary-indep binary-arch binary install install-indep install-arch configure diff --git a/debian/templates b/debian/templates new file mode 100644 index 0000000..b73dc5e --- /dev/null +++ b/debian/templates @@ -0,0 +1,11 @@ +Template: etherpad/admin_password +Type: password +Default: password +Description: etherpad administration password + Please insert the administration password, default is password. + +Template: etherpad/topdomains +Type: string +Default: +Description: Domain name of site + Please insert the domain name of your site. diff --git a/etherpad/bin/run-local.sh b/etherpad/bin/run-local.sh index 67a6d57..a559fce 100755 --- a/etherpad/bin/run-local.sh +++ b/etherpad/bin/run-local.sh @@ -46,7 +46,7 @@ fi echo "Using config file: ${cfg_file}" -$JAVA -classpath $CP \ +exec $JAVA -classpath $CP \ -server \ -Xmx${MXRAM} \ -Xms${MXRAM} \ @@ -63,4 +63,3 @@ $JAVA -classpath $CP \ net.appjet.oui.main \ --configFile=${cfg_file} \ "$@" - diff --git a/etherpad/etc/etherpad.local.properties.tmpl b/etherpad/etc/etherpad.local.properties.tmpl new file mode 100644 index 0000000..d9bb899 --- /dev/null +++ b/etherpad/etc/etherpad.local.properties.tmpl @@ -0,0 +1,23 @@ +alwaysHttps = false +ajstdlibHome = ../infrastructure/framework-src/modules +appjetHome = ./data/appjet +devMode = false +etherpad.adminPass = __db_admin_password__ +etherpad.fakeProduction = false +etherpad.isProduction = true +etherpad.proAccounts = true +etherpad.SQL_JDBC_DRIVER = com.mysql.jdbc.Driver +etherpad.SQL_JDBC_URL = jdbc:mysql://__dbc_dbserver__:__dbc_dbport__/__dbc_dbname__ +etherpad.SQL_PASSWORD = __dbc_dbpass__ +etherpad.SQL_USERNAME = __dbc_dbuser__ +hidePorts = false +listen = 9000 +logDir = /var/log/etherpad +modulePath = ./src +motdPage = /ep/pad/view/ro.3PfHCD0ApLc/latest?fullScreen=1&slider=0&sidebar=0 +topdomains = __db_topdomains__,localhost,localhost.localdomain +transportPrefix = /comet +transportUseWildcardSubdomains = true +useHttpsUrls = false +useVirtualFileRoot = ./src +theme = default |